diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
3 files changed, 137 insertions, 66 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt deleted file mode 100644 index 5ff4f64ef8e8..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt +++ /dev/null @@ -1,66 +0,0 @@ -TFP410 DPI to DVI encoder -========================= - -Required properties: -- compatible: "ti,tfp410" - -Optional properties: -- powerdown-gpios: power-down gpio -- reg: I2C address. If and only if present the device node should be placed - into the I2C controller node where the TFP410 I2C is connected to. -- ti,deskew: data de-skew in 350ps increments, from -4 to +3, as configured - through th DK[3:1] pins. This property shall be present only if the TFP410 - is not connected through I2C. - -Required nodes: - -This device has two video ports. Their connections are modeled using the OF -graph bindings specified in [1]. Each port node shall have a single endpoint. - -- Port 0 is the DPI input port. Its endpoint subnode shall contain a - pclk-sample and bus-width property and a remote-endpoint property as specified - in [1]. - - If pclk-sample is not defined, pclk-sample = 0 should be assumed for - backward compatibility. - - If bus-width is not defined then bus-width = 24 should be assumed for - backward compatibility. - bus-width = 24: 24 data lines are connected and single-edge mode - bus-width = 12: 12 data lines are connected and dual-edge mode - -- Port 1 is the DVI output port. Its endpoint subnode shall contain a - remote-endpoint property is specified in [1]. - -[1] Documentation/devicetree/bindings/media/video-interfaces.txt - - -Example -------- - -tfp410: encoder@0 { - compatible = "ti,tfp410"; - powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; - ti,deskew = <4>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint@0 { - pclk-sample = <1>; - bus-width = <24>; - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint@0 { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml new file mode 100644 index 000000000000..605831c1e836 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,tfp410.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TFP410 DPI to DVI encoder + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ti.com> + - Jyri Sarha <jsarha@ti.com> + +properties: + compatible: + const: ti,tfp410 + + reg: + description: I2C address of the device. + maxItems: 1 + + powerdown-gpios: + maxItems: 1 + + ti,deskew: + description: + Data de-skew value in 350ps increments, from 0 to 7, as configured + through the DK[3:1] pins. The de-skew multiplier is computed as + (DK[3:1] - 4), so it ranges from -4 to 3. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + ports: + description: + A node containing input and output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + type: object + + properties: + port@0: + description: DPI input port. + type: object + + properties: + reg: + const: 0 + + endpoint: + type: object + + properties: + pclk-sample: + description: + Endpoint sampling edge. + enum: + - 0 # Falling edge + - 1 # Rising edge + default: 0 + + bus-width: + description: + Endpoint bus width. + enum: + - 12 # 12 data lines connected and dual-edge mode + - 24 # 24 data lines connected and single-edge mode + default: 24 + + port@1: + description: DVI output port. + type: object + + properties: + reg: + const: 1 + + endpoint: + type: object + + required: + - port@0 + - port@1 + +required: + - compatible + - ports + +if: + required: + - reg +then: + properties: + ti,deskew: false +else: + required: + - ti,deskew + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + tfp410: encoder { + compatible = "ti,tfp410"; + powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; + ti,deskew = <3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tfp410_in: endpoint { + pclk-sample = <1>; + bus-width = <24>; + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 31e3efc73e00..6deeeed59e59 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -81,6 +81,10 @@ properties: - boe,nv140fhmn49 # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel - cdtech,s043wq26h-ct7 + # CDTech(H.K.) Electronics Limited 7" WSVGA (1024x600) TFT LCD Panel + - cdtech,s070pws19hp-fc21 + # CDTech(H.K.) Electronics Limited 7" WVGA (800x480) TFT LCD Panel + - cdtech,s070swv29hg-dc44 # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel - cdtech,s070wv95-ct16 # Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel @@ -247,6 +251,8 @@ properties: - starry,kr122ea0sra # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel - tianma,tm070jdhg30 + # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel + - tianma,tm070jvhg33 # Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel - tianma,tm070rvhg71 # Toshiba 8.9" WXGA (1280x768) TFT LCD panel |