diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
112 files changed, 2023 insertions, 589 deletions
diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt index 61d77acbeb5e..f925290d4641 100644 --- a/Documentation/devicetree/bindings/arm/xen.txt +++ b/Documentation/devicetree/bindings/arm/xen.txt @@ -56,7 +56,7 @@ hypervisor { }; The format and meaning of the "xen,uefi-*" parameters are similar to those in -Documentation/arm/uefi.rst, which are provided by the regular UEFI stub. However +Documentation/arch/arm/uefi.rst, which are provided by the regular UEFI stub. However they differ because they are provided by the Xen hypervisor, together with a set of UEFI runtime services implemented via hypercalls, see http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,platform.h.html. diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml index 7fdf40954a4c..38770c4c85fd 100644 --- a/Documentation/devicetree/bindings/ata/ahci-common.yaml +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml @@ -8,7 +8,7 @@ title: Common Properties for Serial ATA AHCI controllers maintainers: - Hans de Goede <hdegoede@redhat.com> - - Damien Le Moal <damien.lemoal@opensource.wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: This document defines device tree properties for a common AHCI SATA diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml index 9b31f864e071..71364c6081ff 100644 --- a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml +++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml @@ -32,7 +32,7 @@ properties: maxItems: 1 iommus: - maxItems: 1 + maxItems: 4 power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml index d8b91944180a..44892aa589fd 100644 --- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml @@ -129,6 +129,7 @@ allOf: - qcom,sm8250-llcc - qcom,sm8350-llcc - qcom,sm8450-llcc + - qcom,sm8550-llcc then: properties: reg: diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml index 998e5cce652f..380cb6d80025 100644 --- a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml +++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 Clock maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: | Canaan Kendryte K210 SoC clocks driver bindings. The clock diff --git a/Documentation/devicetree/bindings/cpu/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml index b8cc826c9501..b3a5356f9916 100644 --- a/Documentation/devicetree/bindings/cpu/idle-states.yaml +++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml @@ -259,7 +259,7 @@ description: |+ http://infocenter.arm.com/help/index.jsp [5] ARM Linux Kernel documentation - Booting AArch64 Linux - Documentation/arm64/booting.rst + Documentation/arch/arm64/booting.rst [6] RISC-V Linux Kernel documentation - CPUs bindings Documentation/devicetree/bindings/riscv/cpus.yaml diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index e6c1ebfe8a32..130e16d025bc 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -82,6 +82,18 @@ properties: Indicates if the DSI controller is driving a panel which needs 2 DSI links. + qcom,master-dsi: + type: boolean + description: | + Indicates if the DSI controller is the master DSI controller when + qcom,dual-dsi-mode enabled. + + qcom,sync-dual-dsi: + type: boolean + description: | + Indicates if the DSI controller needs to sync the other DSI controller + with MIPI DCS commands when qcom,dual-dsi-mode enabled. + assigned-clocks: minItems: 2 maxItems: 4 diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index 367d04ad1923..83381f3a1341 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -71,6 +71,8 @@ properties: minItems: 1 maxItems: 3 + dma-coherent: true + interconnects: maxItems: 1 diff --git a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml index 4fb05eb84e2a..164331eb6275 100644 --- a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml +++ b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Lattice Slave SPI sysCONFIG FPGA manager maintainers: - - Ivan Bornyakov <i.bornyakov@metrotek.ru> + - Vladimir Georgiev <v.georgiev@metrotek.ru> description: | Lattice sysCONFIG port, which is used for FPGA configuration, among others, diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml index 527532f039ce..a157eecfb5fc 100644 --- a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml +++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip Polarfire FPGA manager. maintainers: - - Ivan Bornyakov <i.bornyakov@metrotek.ru> + - Vladimir Georgiev <v.georgiev@metrotek.ru> description: Device Tree Bindings for Microchip Polarfire FPGA Manager using slave SPI to diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml new file mode 100644 index 000000000000..2dc8b07b4d3b --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch + +maintainers: + - Daniel Matyas <daniel.matyas@analog.com> + +description: | + Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with + I2C Interface + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf + +properties: + compatible: + oneOf: + - const: adi,max31827 + - items: + - enum: + - adi,max31828 + - adi,max31829 + - const: adi,max31827 + + reg: + maxItems: 1 + + vref-supply: + description: + Must have values in the interval (1.6V; 3.6V) in order for the device to + function correctly. + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@42 { + compatible = "adi,max31827"; + reg = <0x42>; + vref-supply = <®_vdd>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml index 85d9efb743ee..d9ef86729011 100644 --- a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml +++ b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml @@ -60,6 +60,7 @@ properties: default: 0 regstep: + $ref: /schemas/types.yaml#/definitions/uint32 description: | deprecated, use reg-shift above deprecated: true diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml index 62f3ca66274f..32c821f97779 100644 --- a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml @@ -44,7 +44,7 @@ required: - clock-names - clocks -additionalProperties: true +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml index 63369ba388e4..0a192ca192c5 100644 --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml @@ -39,6 +39,12 @@ properties: power-domains: maxItems: 1 + vref-supply: + description: | + External ADC reference voltage supply on VREFH pad. If VERID[MVI] is + set, there are additional, internal reference voltages selectable. + VREFH1 is always from VREFH pad. + "#io-channel-cells": const: 1 @@ -72,6 +78,7 @@ examples: assigned-clocks = <&clk IMX_SC_R_ADC_0>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_ADC_0>; + vref-supply = <®_1v8>; #io-channel-cells = <1>; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml index 1c7aee5ed3e0..36dff3250ea7 100644 --- a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml @@ -90,7 +90,7 @@ patternProperties: of the MAX chips to the GyroADC, while MISO line of each Maxim ADC connects to a shared input pin of the GyroADC. enum: - - adi,7476 + - adi,ad7476 - fujitsu,mb88101a - maxim,max1162 - maxim,max11100 diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 92117261e1e1..39e64c7f6360 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -166,6 +166,12 @@ properties: resets: maxItems: 1 + mediatek,broken-save-restore-fw: + type: boolean + description: + Asserts that the firmware on this device has issues saving and restoring + GICR registers when the GIC redistributors are powered off. + dependencies: mbi-ranges: [ msi-controller ] msi-controller: [ mbi-ranges ] diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml new file mode 100644 index 000000000000..393c128a41d8 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/loongson,eiointc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson Extended I/O Interrupt Controller + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +description: | + This interrupt controller is found on the Loongson-3 family chips and + Loongson-2K series chips and is used to distribute interrupts directly to + individual cores without forwarding them through the HT's interrupt line. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + enum: + - loongson,ls2k0500-eiointc + - loongson,ls2k2000-eiointc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + +unevaluatedProperties: false + +examples: + - | + eiointc: interrupt-controller@1fe11600 { + compatible = "loongson,ls2k0500-eiointc"; + reg = <0x1fe10000 0x10000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <3>; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml index 8b389314c352..e2ffe0a9c26b 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml @@ -49,6 +49,7 @@ properties: properties: data-lanes: + minItems: 1 maxItems: 2 required: diff --git a/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml new file mode 100644 index 000000000000..ac1a5a17749d --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/nuvoton,npcm-memory-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Memory Controller + +maintainers: + - Marvin Lin <kflin@nuvoton.com> + - Stanley Chu <yschu@nuvoton.com> + +description: | + The Nuvoton BMC SoC supports DDR4 memory with or without ECC (error correction + check). + + The memory controller supports single bit error correction, double bit error + detection (in-line ECC in which a section (1/8th) of the memory device used to + store data is used for ECC storage). + + Note, the bootloader must configure ECC mode for the memory controller. + +properties: + compatible: + enum: + - nuvoton,npcm750-memory-controller + - nuvoton,npcm845-memory-controller + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mc: memory-controller@f0824000 { + compatible = "nuvoton,npcm750-memory-controller"; + reg = <0xf0824000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml index 8459d3642205..3b3beab9db3f 100644 --- a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 System Controller maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: Canaan Inc. Kendryte K210 SoC system controller which provides a diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml new file mode 100644 index 000000000000..cf2500f2e9a0 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml @@ -0,0 +1,406 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk806.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK806 Power Management Integrated Circuit + +maintainers: + - Sebastian Reichel <sebastian.reichel@collabora.com> + +description: + Rockchip RK806 series PMIC. This device consists of an spi or + i2c controlled MFD that includes multiple switchable regulators. + +properties: + compatible: + enum: + - rockchip,rk806 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + vcc1-supply: + description: + The input supply for dcdc-reg1. + + vcc2-supply: + description: + The input supply for dcdc-reg2. + + vcc3-supply: + description: + The input supply for dcdc-reg3. + + vcc4-supply: + description: + The input supply for dcdc-reg4. + + vcc5-supply: + description: + The input supply for dcdc-reg5. + + vcc6-supply: + description: + The input supply for dcdc-reg6. + + vcc7-supply: + description: + The input supply for dcdc-reg7. + + vcc8-supply: + description: + The input supply for dcdc-reg8. + + vcc9-supply: + description: + The input supply for dcdc-reg9. + + vcc10-supply: + description: + The input supply for dcdc-reg10. + + vcc11-supply: + description: + The input supply for pldo-reg1, pldo-reg2 and pldo-reg3. + + vcc12-supply: + description: + The input supply for pldo-reg4 and pldo-reg5. + + vcc13-supply: + description: + The input supply for nldo-reg1, nldo-reg2 and nldo-reg3. + + vcc14-supply: + description: + The input supply for nldo-reg4 and nldo-reg5. + + vcca-supply: + description: + The input supply for pldo-reg6. + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(dcdc-reg([1-9]|10)|pldo-reg[1-6]|nldo-reg[1-5])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +patternProperties: + '-pins$': + type: object + additionalProperties: false + $ref: /schemas/pinctrl/pinmux-node.yaml + + properties: + function: + enum: [pin_fun0, pin_fun1, pin_fun2, pin_fun3, pin_fun4, pin_fun5] + + pins: + $ref: /schemas/types.yaml#/definitions/string + enum: [gpio_pwrctrl1, gpio_pwrctrl2, gpio_pwrctrl3] + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc5v0_sys>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu_mem_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vdd_vdenc_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd1_1v8_ddr_s3: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd1_1v8_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s3: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + master_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "master_pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd2l_0v9_ddr_s3: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd2l_0v9_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + master_nldo3: nldo-reg3 { + regulator-name = "master_nldo3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v75_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml index 1c96da04f0e5..2459a55ed540 100644 --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml @@ -53,10 +53,11 @@ properties: items: - const: arm,pl18x - const: arm,primecell - - description: Entry for STMicroelectronics variant of PL18x. - This dedicated compatible is used by bootloaders. + - description: Entries for STMicroelectronics variant of PL18x. items: - - const: st,stm32-sdmmc2 + - enum: + - st,stm32-sdmmc2 + - st,stm32mp25-sdmmc2 - const: arm,pl18x - const: arm,primecell diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt deleted file mode 100644 index d876580ae3b8..000000000000 --- a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt +++ /dev/null @@ -1,23 +0,0 @@ -Broadcom BCM2835 SDHOST controller - -This file documents differences between the core properties described -by mmc.txt and the properties that represent the BCM2835 controller. - -Required properties: -- compatible: Should be "brcm,bcm2835-sdhost". -- clocks: The clock feeding the SDHOST controller. - -Optional properties: -- dmas: DMA channel for read and write. - See Documentation/devicetree/bindings/dma/dma.txt for details - -Example: - -sdhost: mmc@7e202000 { - compatible = "brcm,bcm2835-sdhost"; - reg = <0x7e202000 0x100>; - interrupts = <2 24>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - dmas = <&dma 13>; - dma-names = "rx-tx"; -}; diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml new file mode 100644 index 000000000000..3a5a44800675 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/brcm,bcm2835-sdhost.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 SDHOST controller + +maintainers: + - Stefan Wahren <stefan.wahren@i2se.com> + +allOf: + - $ref: mmc-controller.yaml + +properties: + compatible: + const: brcm,bcm2835-sdhost + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + const: rx-tx + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + sdhost: mmc@7e202000 { + compatible = "brcm,bcm2835-sdhost"; + reg = <0x7e202000 0x100>; + interrupts = <2 24>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + dmas = <&dma 13>; + dma-names = "rx-tx"; + bus-width = <4>; + }; diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt deleted file mode 100644 index 7f5dd83f5bd9..000000000000 --- a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt +++ /dev/null @@ -1,21 +0,0 @@ -Broadcom BCM281xx SDHCI - -This file documents differences between the core properties in mmc.txt -and the properties present in the bcm281xx SDHCI - -Required properties: -- compatible : Should be "brcm,kona-sdhci" -- DEPRECATED: compatible : Should be "bcm,kona-sdhci" -- clocks: phandle + clock specifier pair of the external clock - -Refer to clocks/clock-bindings.txt for generic clock consumer properties. - -Example: - -sdio2: sdio@3f1a0000 { - compatible = "brcm,kona-sdhci"; - reg = <0x3f1a0000 0x10000>; - clocks = <&sdio3_clk>; - interrupts = <0x0 74 0x4>; -}; - diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml new file mode 100644 index 000000000000..12eb3988f824 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/brcm,kona-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family SDHCI controller + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: sdhci-common.yaml# + +properties: + compatible: + const: brcm,kona-sdhci + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/bcm281xx.h> + + mmc@3f1a0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x3f1a0000 0x10000>; + clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + }; +... diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index fbfd822b9270..82eb7a24c857 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -42,6 +42,7 @@ properties: - enum: - fsl,imx6sll-usdhc - fsl,imx6ull-usdhc + - fsl,imx6ul-usdhc - const: fsl,imx6sx-usdhc - items: - const: fsl,imx7d-usdhc diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index 4f2d9e8127dd..6da28e630577 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -36,11 +36,14 @@ properties: - enum: - qcom,ipq5018-sdhci - qcom,ipq5332-sdhci + - qcom,ipq6018-sdhci - qcom,ipq9574-sdhci - qcom,qcm2290-sdhci - qcom,qcs404-sdhci + - qcom,qdu1000-sdhci - qcom,sc7180-sdhci - qcom,sc7280-sdhci + - qcom,sc8280xp-sdhci - qcom,sdm630-sdhci - qcom,sdm670-sdhci - qcom,sdm845-sdhci diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index 9a88870cd865..054b6b8bf9b9 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -49,13 +49,12 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 maximum: 7 - nand-ecc-mode: true - nand-ecc-algo: const: bch @@ -75,7 +74,7 @@ patternProperties: minimum: 0 maximum: 1 - additionalProperties: false + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml index 28fb9a7dd70f..787ef488dd5b 100644 --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml @@ -40,6 +40,7 @@ properties: patternProperties: "^nand@[0-7]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 @@ -58,6 +59,14 @@ patternProperties: meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60 meson-axg-nfc 8 + nand-rb: + maxItems: 1 + items: + maximum: 0 + + unevaluatedProperties: false + + required: - compatible - reg @@ -87,6 +96,7 @@ examples: nand@0 { reg = <0>; + nand-rb = <0>; }; }; diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml index 1571024aa119..f57e96374e67 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml @@ -114,6 +114,7 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: compatible: const: brcm,nandcs @@ -136,6 +137,8 @@ patternProperties: layout. $ref: /schemas/types.yaml#/definitions/uint32 + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml# - if: diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml index 0be83ad42970..81f95538d415 100644 --- a/Documentation/devicetree/bindings/mtd/denali,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml @@ -63,6 +63,12 @@ properties: minItems: 1 maxItems: 2 +patternProperties: + "^nand@[a-f0-9]$": + type: object + $ref: raw-nand-chip.yaml + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml @@ -74,7 +80,6 @@ allOf: then: patternProperties: "^nand@[a-f0-9]$": - type: object properties: nand-ecc-strength: enum: @@ -92,7 +97,6 @@ allOf: then: patternProperties: "^nand@[a-f0-9]$": - type: object properties: nand-ecc-strength: enum: @@ -111,7 +115,6 @@ allOf: then: patternProperties: "^nand@[a-f0-9]$": - type: object properties: nand-ecc-strength: enum: diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml index a7bdb5d3675c..b9312ebefeb9 100644 --- a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml @@ -39,7 +39,9 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: + rb-gpios: description: GPIO specifier for the busy pin. maxItems: 1 @@ -48,6 +50,8 @@ patternProperties: description: GPIO specifier for the write-protect pin. maxItems: 1 + unevaluatedProperties: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml index cc3def758e00..07bc7e3efd3a 100644 --- a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml +++ b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml @@ -42,17 +42,16 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 maximum: 1 - nand-ecc-mode: true - nand-ecc-algo: const: hw - additionalProperties: false + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml new file mode 100644 index 000000000000..a10729bb1840 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml @@ -0,0 +1,226 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/marvell,nand-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell NAND Flash Controller (NFC) + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +properties: + compatible: + oneOf: + - items: + - const: marvell,armada-8k-nand-controller + - const: marvell,armada370-nand-controller + - enum: + - marvell,armada370-nand-controller + - marvell,pxa3xx-nand-controller + - description: legacy bindings + deprecated: true + enum: + - marvell,armada-8k-nand + - marvell,armada370-nand + - marvell,pxa3xx-nand + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: + Shall reference the NAND controller clocks, the second one is + is only needed for the Armada 7K/8K SoCs + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: reg + + dmas: + maxItems: 1 + + dma-names: + items: + - const: data + + marvell,system-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: Syscon node that handles NAND controller related registers + +patternProperties: + "^nand@[a-f0-9]$": + type: object + $ref: raw-nand-chip.yaml + + properties: + reg: + minimum: 0 + maximum: 3 + + nand-rb: + items: + - minimum: 0 + maximum: 1 + + nand-ecc-step-size: + const: 512 + + nand-ecc-strength: + enum: [1, 4, 8, 12, 16] + + nand-ecc-mode: + const: hw + + marvell,nand-keep-config: + $ref: /schemas/types.yaml#/definitions/flag + description: + Orders the driver not to take the timings from the core and + leaving them completely untouched. Bootloader timings will then + be used. + + marvell,nand-enable-arbiter: + $ref: /schemas/types.yaml#/definitions/flag + description: + To enable the arbiter, all boards blindly used it, + this bit was set by the bootloader for many boards and even if + it is marked reserved in several datasheets, it might be needed to set + it (otherwise it is harmless). + deprecated: true + + required: + - reg + - nand-rb + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + +allOf: + - $ref: nand-controller.yaml# + + - if: + properties: + compatible: + contains: + const: marvell,pxa3xx-nand-controller + then: + required: + - dmas + - dma-names + + - if: + properties: + compatible: + contains: + const: marvell,armada-8k-nand-controller + then: + properties: + clocks: + minItems: 2 + + clock-names: + minItems: 2 + + required: + - marvell,system-controller + + else: + properties: + clocks: + minItems: 1 + + clock-names: + minItems: 1 + + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + nand_controller: nand-controller@d0000 { + compatible = "marvell,armada370-nand-controller"; + reg = <0xd0000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coredivclk 0>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Rootfs"; + reg = <0x00000000 0x40000000>; + }; + }; + }; + }; + + - | + cp0_nand_controller: nand-controller@720000 { + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&cp0_clk 1 2>, + <&cp0_clk 1 17>; + marvell,system-controller = <&cp0_syscon0>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + }; + }; + + - | + nand-controller@43100000 { + compatible = "marvell,pxa3xx-nand-controller"; + reg = <0x43100000 90>; + interrupts = <45>; + clocks = <&clks 1>; + clock-names = "core"; + dmas = <&pdma 97 3>; + dma-names = "data"; + #address-cells = <1>; + #size-cells = <0>; + nand@0 { + reg = <0>; + nand-rb = <0>; + nand-ecc-mode = "hw"; + marvell,nand-keep-config; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/Documentation/devicetree/bindings/mtd/marvell-nand.txt deleted file mode 100644 index a2d9a0f2b683..000000000000 --- a/Documentation/devicetree/bindings/mtd/marvell-nand.txt +++ /dev/null @@ -1,126 +0,0 @@ -Marvell NAND Flash Controller (NFC) - -Required properties: -- compatible: can be one of the following: - * "marvell,armada-8k-nand-controller" - * "marvell,armada370-nand-controller" - * "marvell,pxa3xx-nand-controller" - * "marvell,armada-8k-nand" (deprecated) - * "marvell,armada370-nand" (deprecated) - * "marvell,pxa3xx-nand" (deprecated) - Compatibles marked deprecated support only the old bindings described - at the bottom. -- reg: NAND flash controller memory area. -- #address-cells: shall be set to 1. Encode the NAND CS. -- #size-cells: shall be set to 0. -- interrupts: shall define the NAND controller interrupt. -- clocks: shall reference the NAND controller clocks, the second one is - is only needed for the Armada 7K/8K SoCs -- clock-names: mandatory if there is a second clock, in this case there - should be one clock named "core" and another one named "reg" -- marvell,system-controller: Set to retrieve the syscon node that handles - NAND controller related registers (only required with the - "marvell,armada-8k-nand[-controller]" compatibles). - -Optional properties: -- label: see partition.txt. New platforms shall omit this property. -- dmas: shall reference DMA channel associated to the NAND controller. - This property is only used with "marvell,pxa3xx-nand[-controller]" - compatible strings. -- dma-names: shall be "rxtx". - This property is only used with "marvell,pxa3xx-nand[-controller]" - compatible strings. - -Optional children nodes: -Children nodes represent the available NAND chips. - -Required properties: -- reg: shall contain the native Chip Select ids (0-3). -- nand-rb: see nand-controller.yaml (0-1). - -Optional properties: -- marvell,nand-keep-config: orders the driver not to take the timings - from the core and leaving them completely untouched. Bootloader - timings will then be used. -- label: MTD name. -- nand-on-flash-bbt: see nand-controller.yaml. -- nand-ecc-mode: see nand-controller.yaml. Will use hardware ECC if not specified. -- nand-ecc-algo: see nand-controller.yaml. This property is essentially useful when - not using hardware ECC. Howerver, it may be added when using hardware - ECC for clarification but will be ignored by the driver because ECC - mode is chosen depending on the page size and the strength required by - the NAND chip. This value may be overwritten with nand-ecc-strength - property. -- nand-ecc-strength: see nand-controller.yaml. -- nand-ecc-step-size: see nand-controller.yaml. Marvell's NAND flash controller does - use fixed strength (1-bit for Hamming, 16-bit for BCH), so the actual - step size will shrink or grow in order to fit the required strength. - Step sizes are not completely random for all and follow certain - patterns described in AN-379, "Marvell SoC NFC ECC". - -See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on -generic bindings. - - -Example: -nand_controller: nand-controller@d0000 { - compatible = "marvell,armada370-nand-controller"; - reg = <0xd0000 0x54>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&coredivclk 0>; - - nand@0 { - reg = <0>; - label = "main-storage"; - nand-rb = <0>; - nand-ecc-mode = "hw"; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Rootfs"; - reg = <0x00000000 0x40000000>; - }; - }; - }; -}; - - -Note on legacy bindings: One can find, in not-updated device trees, -bindings slightly different than described above with other properties -described below as well as the partitions node at the root of a so -called "nand" node (without clear controller/chip separation). - -Legacy properties: -- marvell,nand-enable-arbiter: To enable the arbiter, all boards blindly - used it, this bit was set by the bootloader for many boards and even if - it is marked reserved in several datasheets, it might be needed to set - it (otherwise it is harmless) so whether or not this property is set, - the bit is selected by the driver. -- num-cs: Number of chip-select lines to use, all boards blindly set 1 - to this and for a reason, other values would have failed. The value of - this property is ignored. - -Example: - - nand0: nand@43100000 { - compatible = "marvell,pxa3xx-nand"; - reg = <0x43100000 90>; - interrupts = <45>; - dmas = <&pdma 97 0>; - dma-names = "rxtx"; - #address-cells = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - num-cs = <1>; - /* Partitions (optional) */ - }; diff --git a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml index a6e7f123eda7..ab503a33a269 100644 --- a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml +++ b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml @@ -40,12 +40,11 @@ properties: patternProperties: "^nand@[a-f0-9]$": - $ref: nand-chip.yaml# + $ref: raw-nand-chip.yaml# unevaluatedProperties: false properties: reg: maximum: 1 - nand-on-flash-bbt: true nand-ecc-mode: const: hw diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml index da3d488c335f..b82ca03e969c 100644 --- a/Documentation/devicetree/bindings/mtd/mtd.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -12,7 +12,7 @@ maintainers: properties: $nodename: - pattern: "^(flash|.*sram)(@.*)?$" + pattern: "^(flash|.*sram|nand)(@.*)?$" label: description: diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index f70a32d2d9d4..83a4fe4cc29d 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -16,16 +16,6 @@ description: | children nodes of the NAND controller. This representation should be enforced even for simple controllers supporting only one chip. - The ECC strength and ECC step size properties define the user - desires in terms of correction capability of a controller. Together, - they request the ECC engine to correct {strength} bit errors per - {size} bytes. - - The interpretation of these parameters is implementation-defined, so - not all implementations must support all possible - combinations. However, implementations are encouraged to further - specify the value(s) they support. - properties: $nodename: pattern: "^nand-controller(@.*)?" @@ -51,79 +41,8 @@ properties: patternProperties: "^nand@[a-f0-9]$": - $ref: nand-chip.yaml# - - properties: - reg: - description: - Contains the chip-select IDs. - - nand-ecc-placement: - description: - Location of the ECC bytes. This location is unknown by default - but can be explicitly set to "oob", if all ECC bytes are - known to be stored in the OOB area, or "interleaved" if ECC - bytes will be interleaved with regular data in the main area. - $ref: /schemas/types.yaml#/definitions/string - enum: [ oob, interleaved ] - - nand-bus-width: - description: - Bus width to the NAND chip - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [8, 16] - default: 8 - - nand-on-flash-bbt: - description: - With this property, the OS will search the device for a Bad - Block Table (BBT). If not found, it will create one, reserve - a few blocks at the end of the device to store it and update - it as the device ages. Otherwise, the out-of-band area of a - few pages of all the blocks will be scanned at boot time to - find Bad Block Markers (BBM). These markers will help to - build a volatile BBT in RAM. - $ref: /schemas/types.yaml#/definitions/flag - - nand-ecc-maximize: - description: - Whether or not the ECC strength should be maximized. The - maximum ECC strength is both controller and chip - dependent. The ECC engine has to select the ECC config - providing the best strength and taking the OOB area size - constraint into account. This is particularly useful when - only the in-band area is used by the upper layers, and you - want to make your NAND as reliable as possible. - $ref: /schemas/types.yaml#/definitions/flag - - nand-is-boot-medium: - description: - Whether or not the NAND chip is a boot medium. Drivers might - use this information to select ECC algorithms supported by - the boot ROM or similar restrictions. - $ref: /schemas/types.yaml#/definitions/flag - - nand-rb: - description: - Contains the native Ready/Busy IDs. - $ref: /schemas/types.yaml#/definitions/uint32-array - - rb-gpios: - description: - Contains one or more GPIO descriptor (the numper of descriptor - depends on the number of R/B pins exposed by the flash) for the - Ready/Busy pins. Active state refers to the NAND ready state and - should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted. - - wp-gpios: - description: - Contains one GPIO descriptor for the Write Protect pin. - Active state refers to the NAND Write Protect state and should be - set to GPIOD_ACTIVE_LOW unless the signal is inverted. - maxItems: 1 - - required: - - reg + type: object + $ref: raw-nand-chip.yaml# required: - "#address-cells" diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml index cdffbb9cedc2..1ebe9e2347ea 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml @@ -55,6 +55,7 @@ properties: linux,rootfs: description: Marks partition that contains root filesystem to mount and boot user space from + type: boolean if: not: diff --git a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml index 2edc65e0e361..1dda2c80747b 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml @@ -21,6 +21,7 @@ oneOf: - $ref: linksys,ns-partitions.yaml - $ref: qcom,smem-part.yaml - $ref: redboot-fis.yaml + - $ref: tplink,safeloader-partitions.yaml properties: compatible: true diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml index 00c991ffa6c4..4ada60fbf81d 100644 --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml @@ -34,7 +34,9 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: + nand-bus-width: const: 8 @@ -45,6 +47,24 @@ patternProperties: enum: - 512 + qcom,boot-partitions: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: offset + - description: size + description: + Boot partition use a different layout where the 4 bytes of spare + data are not protected by ECC. Use this to declare these special + partitions by defining first the offset and then the size. + + It's in the form of <offset1 size1 offset2 size2 offset3 ...> + and should be declared in ascending order. + + Refer to the ipq8064 example on how to use this special binding. + + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml# @@ -107,22 +127,15 @@ allOf: - qcom,ipq806x-nand then: - properties: - qcom,boot-partitions: - $ref: /schemas/types.yaml#/definitions/uint32-matrix - items: - items: - - description: offset - - description: size - description: - Boot partition use a different layout where the 4 bytes of spare - data are not protected by ECC. Use this to declare these special - partitions by defining first the offset and then the size. - - It's in the form of <offset1 size1 offset2 size2 offset3 ...> - and should be declared in ascending order. - - Refer to the ipq8064 example on how to use this special binding. + patternProperties: + "^nand@[a-f0-9]$": + properties: + qcom,boot-partitions: true + else: + patternProperties: + "^nand@[a-f0-9]$": + properties: + qcom,boot-partitions: false required: - compatible diff --git a/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml new file mode 100644 index 000000000000..092448d7bfc5 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/raw-nand-chip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raw NAND Chip Common Properties + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +allOf: + - $ref: nand-chip.yaml# + +description: | + The ECC strength and ECC step size properties define the user + desires in terms of correction capability of a controller. Together, + they request the ECC engine to correct {strength} bit errors per + {size} bytes for a particular raw NAND chip. + + The interpretation of these parameters is implementation-defined, so + not all implementations must support all possible + combinations. However, implementations are encouraged to further + specify the value(s) they support. + +properties: + $nodename: + pattern: "^nand@[a-f0-9]$" + + reg: + description: + Contains the chip-select IDs. + + nand-ecc-placement: + description: + Location of the ECC bytes. This location is unknown by default + but can be explicitly set to "oob", if all ECC bytes are + known to be stored in the OOB area, or "interleaved" if ECC + bytes will be interleaved with regular data in the main area. + $ref: /schemas/types.yaml#/definitions/string + enum: [ oob, interleaved ] + deprecated: true + + nand-ecc-mode: + description: + Legacy ECC configuration mixing the ECC engine choice and + configuration. + $ref: /schemas/types.yaml#/definitions/string + enum: [none, soft, soft_bch, hw, hw_syndrome, on-die] + deprecated: true + + nand-bus-width: + description: + Bus width to the NAND chip + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8 + + nand-on-flash-bbt: + description: + With this property, the OS will search the device for a Bad + Block Table (BBT). If not found, it will create one, reserve + a few blocks at the end of the device to store it and update + it as the device ages. Otherwise, the out-of-band area of a + few pages of all the blocks will be scanned at boot time to + find Bad Block Markers (BBM). These markers will help to + build a volatile BBT in RAM. + $ref: /schemas/types.yaml#/definitions/flag + + nand-ecc-maximize: + description: + Whether or not the ECC strength should be maximized. The + maximum ECC strength is both controller and chip + dependent. The ECC engine has to select the ECC config + providing the best strength and taking the OOB area size + constraint into account. This is particularly useful when + only the in-band area is used by the upper layers, and you + want to make your NAND as reliable as possible. + $ref: /schemas/types.yaml#/definitions/flag + + nand-is-boot-medium: + description: + Whether or not the NAND chip is a boot medium. Drivers might + use this information to select ECC algorithms supported by + the boot ROM or similar restrictions. + $ref: /schemas/types.yaml#/definitions/flag + + nand-rb: + description: + Contains the native Ready/Busy IDs. + $ref: /schemas/types.yaml#/definitions/uint32-array + + rb-gpios: + description: + Contains one or more GPIO descriptor (the numper of descriptor + depends on the number of R/B pins exposed by the flash) for the + Ready/Busy pins. Active state refers to the NAND ready state and + should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted. + + wp-gpios: + description: + Contains one GPIO descriptor for the Write Protect pin. + Active state refers to the NAND Write Protect state and should be + set to GPIOD_ACTIVE_LOW unless the signal is inverted. + maxItems: 1 + +required: + - reg + +# This is a generic file other binding inherit from and extend +additionalProperties: true diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml index 7eb1d0a38565..ee53715ffdca 100644 --- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml @@ -57,6 +57,7 @@ properties: patternProperties: "^nand@[0-7]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 @@ -116,6 +117,8 @@ patternProperties: Only used in combination with 'nand-is-boot-medium'. + unevaluatedProperties: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml index 986e85ccebc7..e72cb5bacaf0 100644 --- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml @@ -37,6 +37,7 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: nand-ecc-step-size: const: 512 @@ -44,6 +45,8 @@ patternProperties: nand-ecc-strength: enum: [1, 4, 8] + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml# diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml index 4774c92e7fc4..df4fdc02456d 100644 --- a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml +++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml @@ -30,6 +30,8 @@ properties: patternProperties: "^flash@[0-1],[0-9a-f]+$": type: object + $ref: mtd-physmap.yaml + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml index 3bd912ed7c7e..23e92be33ac8 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Allwinner A20 GMAC allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 47bc2057e629..4bfac9186886 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -63,7 +63,7 @@ required: - syscon allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml index 9d02af468906..f5d3b70af07a 100644 --- a/Documentation/devicetree/bindings/net/altr,tse.yaml +++ b/Documentation/devicetree/bindings/net/altr,tse.yaml @@ -72,8 +72,8 @@ allOf: compatible: contains: enum: - - const: altr,tse-1.0 - - const: ALTR,tse-1.0 + - altr,tse-1.0 + - ALTR,tse-1.0 then: properties: reg: diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index a2c51a84efa5..ee7a65b528cd 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -27,7 +27,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index 68f78b90d23a..604985c8068e 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -50,6 +50,9 @@ properties: vddch0-supply: description: VDD_CH0 supply regulator handle + vddch1-supply: + description: VDD_CH1 supply regulator handle + vddaon-supply: description: VDD_AON supply regulator handle diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml index 0e5e5db32faf..7c90a4390531 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml @@ -55,7 +55,7 @@ properties: patternProperties: "^mdio@[0-9a-f]+$": type: object - $ref: "brcm,unimac-mdio.yaml" + $ref: brcm,unimac-mdio.yaml description: GENET internal UniMAC MDIO bus diff --git a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml index 769fa5c27b76..de1d4298893b 100644 --- a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml +++ b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml @@ -21,11 +21,22 @@ properties: st,can-primary: description: - Primary and secondary mode of the bxCAN peripheral is only relevant - if the chip has two CAN peripherals. In that case they share some - of the required logic. + Primary mode of the bxCAN peripheral is only relevant if the chip has + two CAN peripherals in dual CAN configuration. In that case they share + some of the required logic. + Not to be used if the peripheral is in single CAN configuration. To avoid misunderstandings, it should be noted that ST documentation - uses the terms master/slave instead of primary/secondary. + uses the terms master instead of primary. + type: boolean + + st,can-secondary: + description: + Secondary mode of the bxCAN peripheral is only relevant if the chip + has two CAN peripherals in dual CAN configuration. In that case they + share some of the required logic. + Not to be used if the peripheral is in single CAN configuration. + To avoid misunderstandings, it should be noted that ST documentation + uses the terms slave instead of secondary. type: boolean reg: diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index bef5e0f895be..bf8894a0257e 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -109,6 +109,16 @@ properties: power-domains: maxItems: 1 + cdns,rx-watermark: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the receive partial store and forward mode is activated, + the receiver will only begin to forward the packet to the external + AHB or AXI slave when enough packet data is stored in the SRAM packet buffer. + rx-watermark corresponds to the number of SRAM buffer locations, + that need to be filled, before the forwarding process is activated. + Width of the SRAM is platform dependent, and can be 4, 8 or 16 bytes. + '#address-cells': const: 1 @@ -166,6 +176,7 @@ examples: compatible = "cdns,macb"; reg = <0xfffc4000 0x4000>; interrupts = <21>; + cdns,rx-watermark = <0x44>; phy-mode = "rmii"; local-mac-address = [3a 0e 03 04 05 06]; clock-names = "pclk", "hclk", "tx_clk"; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index 2363b412410c..33726134f5c9 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -20,7 +20,7 @@ which is at a different MDIO base address in different switch families. 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 - "marvell,mv88e6190" : Switch has base address 0x00. Use with models: - 6190, 6190X, 6191, 6290, 6390, 6390X + 6163, 6190, 6190X, 6191, 6290, 6390, 6390X - "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: 6220, 6250 diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml index 9a64ed658745..4d5f5cc6d031 100644 --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -12,10 +12,6 @@ description: cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed depends on the SPI bus master driver. -allOf: - - $ref: dsa.yaml#/$defs/ethernet-ports - - $ref: /schemas/spi/spi-peripheral-props.yaml# - maintainers: - Vladimir Oltean <vladimir.oltean@nxp.com> @@ -36,6 +32,9 @@ properties: reg: maxItems: 1 + spi-cpha: true + spi-cpol: true + # Optional container node for the 2 internal MDIO buses of the SJA1110 # (one for the internal 100base-T1 PHYs and the other for the single # 100base-TX PHY). The "reg" property does not have physical significance. @@ -109,6 +108,30 @@ $defs: 1860, 1880, 1900, 1920, 1940, 1960, 1980, 2000, 2020, 2040, 2060, 2080, 2100, 2120, 2140, 2160, 2180, 2200, 2220, 2240, 2260] +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + enum: + - nxp,sja1105e + - nxp,sja1105p + - nxp,sja1105q + - nxp,sja1105r + - nxp,sja1105s + - nxp,sja1105t + then: + properties: + spi-cpol: false + required: + - spi-cpha + else: + properties: + spi-cpha: false + required: + - spi-cpol + unevaluatedProperties: false examples: @@ -120,6 +143,7 @@ examples: ethernet-switch@1 { reg = <0x1>; compatible = "nxp,sja1105t"; + spi-cpha; ethernet-ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 4f574532ee13..c1241c8a3b77 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -93,6 +93,12 @@ properties: the turn around line low at end of the control phase of the MDIO transaction. + clocks: + maxItems: 1 + description: + External clock connected to the PHY. If not specified it is assumed + that the PHY uses a fixed crystal or an internal oscillator. + enet-phy-lane-swap: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml index d23fa3771210..42a0bc94312c 100644 --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml @@ -19,7 +19,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml index d71fa9de2b64..8a3713abd1ca 100644 --- a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml +++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml @@ -17,11 +17,12 @@ properties: maxlinear,use-broken-interrupts: description: | Interrupts are broken on some GPY2xx PHYs in that they keep the - interrupt line asserted even after the interrupt status register is - cleared. Thus it is blocking the interrupt line which is usually bad - for shared lines. By default interrupts are disabled for this PHY and - polling mode is used. If one can live with the consequences, this - property can be used to enable interrupt handling. + interrupt line asserted for a random amount of time even after the + interrupt status register is cleared. Thus it is blocking the + interrupt line which is usually bad for shared lines. By default, + interrupts are disabled for this PHY and polling mode is used. If one + can live with the consequences, this property can be used to enable + interrupt handling. Affected PHYs (as far as known) are GPY215B and GPY215C. type: boolean diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml index 0fa2132fa4f4..08d74ca0769c 100644 --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml @@ -25,7 +25,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml index b44d83554ef5..b726c6e14633 100644 --- a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml +++ b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml @@ -44,13 +44,13 @@ required: allOf: - $ref: ethernet-controller.yaml# - - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# - if: properties: compatible: contains: const: micrel,ks8851 then: + $ref: /schemas/spi/spi-peripheral-props.yaml# properties: reg: maxItems: 1 @@ -60,6 +60,7 @@ allOf: contains: const: micrel,ks8851-mll then: + $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# properties: reg: minItems: 2 diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml index 63409cbff5ad..4c01cae7c93a 100644 --- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml @@ -24,7 +24,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml index b110abb42597..2d382faca0e6 100644 --- a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml +++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml @@ -16,7 +16,7 @@ maintainers: properties: $nodename: - pattern: "^ethernet-pse(@.*)?$" + pattern: "^ethernet-pse(@.*|-([0-9]|[1-9][0-9]+))?$" "#pse-cells": description: diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml index 60a38044fb19..7bdb412a0185 100644 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml @@ -20,6 +20,7 @@ properties: compatible: enum: - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - qcom,sm8150-ethqos @@ -32,11 +33,13 @@ properties: - const: rgmii interrupts: + minItems: 1 items: - description: Combined signal for various interrupt events - description: The interrupt that occurs when Rx exits the LPI state interrupt-names: + minItems: 1 items: - const: macirq - const: eth_lpi @@ -49,11 +52,18 @@ properties: - const: stmmaceth - const: pclk - const: ptp_ref - - const: rgmii + - enum: + - rgmii + - phyaux iommus: maxItems: 1 + phys: true + + phy-names: + const: serdes + required: - compatible - clocks diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml index 8cc2b9924680..043e118c605c 100644 --- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml @@ -11,7 +11,7 @@ maintainers: - Alistair Francis <alistair@alistair23.me> description: - RTL8723CS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part + RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part is connected over SDIO, while BT is connected over serial. It speaks H5 protocol with few extra commands to upload firmware and change module speed. @@ -27,7 +27,7 @@ properties: - items: - enum: - realtek,rtl8821cs-bt - - const: realtek,rtl8822cs-bt + - const: realtek,rtl8723bs-bt device-wake-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 2a21bbe02892..176ea5f90251 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -32,7 +32,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 363b3e3ea3a6..ddf9522a5dc2 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -67,6 +67,7 @@ properties: - loongson,ls2k-dwmac - loongson,ls7a-dwmac - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - qcom,sm8150-ethqos - renesas,r9a06g032-gmac @@ -582,6 +583,7 @@ allOf: - ingenic,x1600-mac - ingenic,x1830-mac - ingenic,x2000-mac + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - snps,dwmac-3.50a - snps,dwmac-4.10a @@ -638,6 +640,7 @@ allOf: - ingenic,x1830-mac - ingenic,x2000-mac - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - qcom,sm8150-ethqos - snps,dwmac-4.00 diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 395a4650e285..c9c25132d154 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -168,14 +168,14 @@ properties: patternProperties: "^mdio@[0-9a-f]+$": type: object - $ref: "ti,davinci-mdio.yaml#" + $ref: ti,davinci-mdio.yaml# description: CPSW MDIO bus. "^cpts@[0-9a-f]+": type: object - $ref: "ti,k3-am654-cpts.yaml#" + $ref: ti,k3-am654-cpts.yaml# description: CPSW Common Platform Time Sync (CPTS) module. diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml index 474fa8bcf302..052f636158b3 100644 --- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml @@ -19,7 +19,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml index c85ed330426d..7758a55dd328 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -84,6 +84,8 @@ properties: required: - iommus + ieee80211-freq-limit: true + qcom,ath10k-calibration-data: $ref: /schemas/types.yaml#/definitions/uint8-array description: @@ -164,6 +166,7 @@ required: additionalProperties: false allOf: + - $ref: ieee80211.yaml# - if: properties: compatible: @@ -355,4 +358,5 @@ examples: "msi14", "msi15", "legacy"; + ieee80211-freq-limit = <5470000 5875000>; }; diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt deleted file mode 100644 index 80e505a2fda1..000000000000 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ /dev/null @@ -1,101 +0,0 @@ -XILINX AXI ETHERNET Device Tree Bindings --------------------------------------------------------- - -Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core -provides connectivity to an external ethernet PHY supporting different -interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two -segments of memory for buffering TX and RX, as well as the capability of -offloading TX/RX checksum calculation off the processor. - -Management configuration is done through the AXI interface, while payload is -sent and received through means of an AXI DMA controller. This driver -includes the DMA driver code, so this driver is incompatible with AXI DMA -driver. - -For more details about mdio please refer phy.txt file in the same directory. - -Required properties: -- compatible : Must be one of "xlnx,axi-ethernet-1.00.a", - "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a" -- reg : Address and length of the IO space, as well as the address - and length of the AXI DMA controller IO space, unless - axistream-connected is specified, in which case the reg - attribute of the node referenced by it is used. -- interrupts : Should be a list of 2 or 3 interrupts: TX DMA, RX DMA, - and optionally Ethernet core. If axistream-connected is - specified, the TX/RX DMA interrupts should be on that node - instead, and only the Ethernet core interrupt is optionally - specified here. -- phy-handle : Should point to the external phy device if exists. Pointing - this to the PCS/PMA PHY is deprecated and should be avoided. - See ethernet.txt file in the same directory. -- xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware - -Optional properties: -- phy-mode : See ethernet.txt -- xlnx,phy-type : Deprecated, do not use, but still accepted in preference - to phy-mode. -- xlnx,txcsum : 0 or empty for disabling TX checksum offload, - 1 to enable partial TX checksum offload, - 2 to enable full TX checksum offload -- xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload -- xlnx,switch-x-sgmii : Boolean to indicate the Ethernet core is configured to - support both 1000BaseX and SGMII modes. If set, the phy-mode - should be set to match the mode selected on core reset (i.e. - by the basex_or_sgmii core input line). -- clock-names: Tuple listing input clock names. Possible clocks: - s_axi_lite_clk: Clock for AXI register slave interface - axis_clk: AXI4-Stream clock for TXD RXD TXC and RXS interfaces - ref_clk: Ethernet reference clock, used by signal delay - primitives and transceivers - mgt_clk: MGT reference clock (used by optional internal - PCS/PMA PHY) - - Note that if s_axi_lite_clk is not specified by name, the - first clock of any name is used for this. If that is also not - specified, the clock rate is auto-detected from the CPU clock - (but only on platforms where this is possible). New device - trees should specify all applicable clocks by name - the - fallbacks to an unnamed clock or to CPU clock are only for - backward compatibility. -- clocks: Phandles to input clocks matching clock-names. Refer to common - clock bindings. -- axistream-connected: Reference to another node which contains the resources - for the AXI DMA controller used by this device. - If this is specified, the DMA-related resources from that - device (DMA registers and DMA TX/RX interrupts) rather - than this one will be used. - - mdio : Child node for MDIO bus. Must be defined if PHY access is - required through the core's MDIO interface (i.e. always, - unless the PHY is accessed through a different bus). - Non-standard MDIO bus frequency is supported via - "clock-frequency", see mdio.yaml. - - - pcs-handle: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X - modes, where "pcs-handle" should be used to point - to the PCS/PMA PHY, and "phy-handle" should point to an - external PHY if exists. - -Example: - axi_ethernet_eth: ethernet@40c00000 { - compatible = "xlnx,axi-ethernet-1.00.a"; - device_type = "network"; - interrupt-parent = <µblaze_0_axi_intc>; - interrupts = <2 0 1>; - clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; - clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; - phy-mode = "mii"; - reg = <0x40c00000 0x40000 0x50c00000 0x40000>; - xlnx,rxcsum = <0x2>; - xlnx,rxmem = <0x800>; - xlnx,txcsum = <0x2>; - phy-handle = <&phy0>; - axi_ethernetlite_0_mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - phy0: phy@0 { - device_type = "ethernet-phy"; - reg = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml new file mode 100644 index 000000000000..1d33d80af11c --- /dev/null +++ b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/xlnx,axi-ethernet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AXI 1G/2.5G Ethernet Subsystem + +description: | + Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core + provides connectivity to an external ethernet PHY supporting different + interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two + segments of memory for buffering TX and RX, as well as the capability of + offloading TX/RX checksum calculation off the processor. + + Management configuration is done through the AXI interface, while payload is + sent and received through means of an AXI DMA controller. This driver + includes the DMA driver code, so this driver is incompatible with AXI DMA + driver. + +maintainers: + - Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> + +properties: + compatible: + enum: + - xlnx,axi-ethernet-1.00.a + - xlnx,axi-ethernet-1.01.a + - xlnx,axi-ethernet-2.01.a + + reg: + description: + Address and length of the IO space, as well as the address + and length of the AXI DMA controller IO space, unless + axistream-connected is specified, in which case the reg + attribute of the node referenced by it is used. + maxItems: 2 + + interrupts: + items: + - description: Ethernet core interrupt + - description: Tx DMA interrupt + - description: Rx DMA interrupt + description: + Ethernet core interrupt is optional. If axistream-connected property is + present DMA node should contains TX/RX DMA interrupts else DMA interrupt + resources are mentioned on ethernet node. + minItems: 1 + + phy-handle: true + + xlnx,rxmem: + description: + Set to allocated memory buffer for Rx/Tx in the hardware. + $ref: /schemas/types.yaml#/definitions/uint32 + + phy-mode: + enum: + - mii + - gmii + - rgmii + - sgmii + - 1000BaseX + + xlnx,phy-type: + description: + Do not use, but still accepted in preference to phy-mode. + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + + xlnx,txcsum: + description: + TX checksum offload. 0 or empty for disabling TX checksum offload, + 1 to enable partial TX checksum offload and 2 to enable full TX + checksum offload. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + xlnx,rxcsum: + description: + RX checksum offload. 0 or empty for disabling RX checksum offload, + 1 to enable partial RX checksum offload and 2 to enable full RX + checksum offload. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + xlnx,switch-x-sgmii: + type: boolean + description: + Indicate the Ethernet core is configured to support both 1000BaseX and + SGMII modes. If set, the phy-mode should be set to match the mode + selected on core reset (i.e. by the basex_or_sgmii core input line). + + clocks: + items: + - description: Clock for AXI register slave interface. + - description: AXI4-Stream clock for TXD RXD TXC and RXS interfaces. + - description: Ethernet reference clock, used by signal delay primitives + and transceivers. + - description: MGT reference clock (used by optional internal PCS/PMA PHY) + + clock-names: + items: + - const: s_axi_lite_clk + - const: axis_clk + - const: ref_clk + - const: mgt_clk + + axistream-connected: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle of AXI DMA controller which contains the resources + used by this device. If this is specified, the DMA-related resources + from that device (DMA registers and DMA TX/RX interrupts) rather than + this one will be used. + + mdio: + type: object + + pcs-handle: + description: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X + modes, where "pcs-handle" should be used to point to the PCS/PMA PHY, + and "phy-handle" should point to an external PHY if exists. + maxItems: 1 + +required: + - compatible + - interrupts + - reg + - xlnx,rxmem + - phy-handle + +allOf: + - $ref: /schemas/net/ethernet-controller.yaml# + +additionalProperties: false + +examples: + - | + axi_ethernet_eth: ethernet@40c00000 { + compatible = "xlnx,axi-ethernet-1.00.a"; + interrupts = <2 0 1>; + clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; + clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; + phy-mode = "mii"; + reg = <0x40c00000 0x40000>,<0x50c00000 0x40000>; + xlnx,rxcsum = <0x2>; + xlnx,rxmem = <0x800>; + xlnx,txcsum = <0x2>; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; + }; + }; + + - | + axi_ethernet_eth1: ethernet@40000000 { + compatible = "xlnx,axi-ethernet-1.00.a"; + interrupts = <0>; + clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; + clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; + phy-mode = "mii"; + reg = <0x00 0x40000000 0x00 0x40000>; + xlnx,rxcsum = <0x2>; + xlnx,rxmem = <0x800>; + xlnx,txcsum = <0x2>; + phy-handle = <&phy1>; + axistream-connected = <&dma>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml index 9bff8ecb653c..d91b639ae7ae 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml @@ -17,20 +17,11 @@ description: properties: clocks: minItems: 3 - items: - - description: PCIe bridge clock. - - description: PCIe bus clock. - - description: PCIe PHY clock. - - description: Additional required clock entry for imx6sx-pcie, - imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep. + maxItems: 4 clock-names: minItems: 3 - items: - - const: pcie - - const: pcie_bus - - enum: [ pcie_phy, pcie_aux ] - - enum: [ pcie_inbound_axi, pcie_aux ] + maxItems: 4 num-lanes: const: 1 diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml index f4a328ec1daa..ee155ed5f181 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml @@ -31,6 +31,19 @@ properties: - const: dbi - const: addr_space + clocks: + minItems: 3 + items: + - description: PCIe bridge clock. + - description: PCIe bus clock. + - description: PCIe PHY clock. + - description: Additional required clock entry for imx6sx-pcie, + imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep. + + clock-names: + minItems: 3 + maxItems: 4 + interrupts: items: - description: builtin eDMA interrupter. @@ -49,6 +62,31 @@ required: allOf: - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml# + - if: + properties: + compatible: + enum: + - fsl,imx8mq-pcie-ep + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_aux + else: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_aux + unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml index 2443641754d3..81bbb8728f0f 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml @@ -40,6 +40,19 @@ properties: - const: dbi - const: config + clocks: + minItems: 3 + items: + - description: PCIe bridge clock. + - description: PCIe bus clock. + - description: PCIe PHY clock. + - description: Additional required clock entry for imx6sx-pcie, + imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep. + + clock-names: + minItems: 3 + maxItems: 4 + interrupts: items: - description: builtin MSI controller. @@ -77,6 +90,70 @@ required: allOf: - $ref: /schemas/pci/snps,dw-pcie.yaml# - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml# + - if: + properties: + compatible: + enum: + - fsl,imx6sx-pcie + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_inbound_axi + + - if: + properties: + compatible: + enum: + - fsl,imx8mq-pcie + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_aux + + - if: + properties: + compatible: + enum: + - fsl,imx6q-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + + - if: + properties: + compatible: + enum: + - fsl,imx8mm-pcie + - fsl,imx8mp-pcie + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_aux unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml index 80a92385367e..e9fad4b3de68 100644 --- a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml +++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/perf/fsl-imx-ddr.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale(NXP) IMX8 DDR performance monitor +title: Freescale(NXP) IMX8/9 DDR performance monitor maintainers: - Frank Li <frank.li@nxp.com> @@ -19,6 +19,7 @@ properties: - fsl,imx8mm-ddr-pmu - fsl,imx8mn-ddr-pmu - fsl,imx8mp-ddr-pmu + - fsl,imx93-ddr-pmu - items: - enum: - fsl,imx8mm-ddr-pmu diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml index 7f4f36a58e56..739a08f00467 100644 --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 FPIOA maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA) diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index c91d3e3a094b..80f960671857 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -144,8 +144,9 @@ $defs: enum: [0, 1, 2, 3, 4, 5, 6, 7] qcom,paired: - - description: - Indicates that the pin should be operating in paired mode. + type: boolean + description: + Indicates that the pin should be operating in paired mode. required: - pins diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index afad3135ed67..f9c211a9a938 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -29,6 +29,7 @@ properties: - qcom,qcm2290-rpmpd - qcom,qcs404-rpmpd - qcom,qdu1000-rpmhpd + - qcom,sa8155p-rpmhpd - qcom,sa8540p-rpmhpd - qcom,sa8775p-rpmhpd - qcom,sdm660-rpmpd diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt index 7034cdca54e0..b6384306db5c 100644 --- a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt @@ -8,15 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt. The valid names for regulators are:: BUCK: - buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11, - buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1 + buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu, + buck_vs2, buck_vmodem, buck_vs1 LDO: ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio, ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others, - ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, - ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, - ldo_vrf18, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, - ldo_vsim2 + ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28, + ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18, + ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2 Example: @@ -305,15 +304,8 @@ Example: regulator-enable-ramp-delay = <120>; }; - mt6358_vcn33_bt_reg: ldo_vcn33_bt { - regulator-name = "vcn33_bt"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3500000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vcn33_wifi_reg: ldo_vcn33_wifi { - regulator-name = "vcn33_wifi"; + mt6358_vcn33_reg: ldo_vcn33 { + regulator-name = "vcn33"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3500000>; regulator-enable-ramp-delay = <270>; @@ -354,17 +346,5 @@ Example: regulator-max-microvolt = <3100000>; regulator-enable-ramp-delay = <540>; }; - - mt6358_vcore_sshub_reg: buck_vcore_sshub { - regulator-name = "vcore_sshub"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - }; - - mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub { - regulator-name = "vsram_others_sshub"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - }; }; }; diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml index 67a30b23b92c..e384e4953f0a 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml +++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml @@ -36,6 +36,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + fsl,pfuze-support-disable-sw: $ref: /schemas/types.yaml#/definitions/flag description: | diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml index 7e58471097f8..80ecf938b749 100644 --- a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml @@ -64,6 +64,7 @@ properties: defined, <100> is assumed, meaning that pwm-dutycycle-range contains values expressed in percent. + $ref: /schemas/types.yaml#/definitions/uint32 default: 100 pwm-dutycycle-range: diff --git a/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml new file mode 100644 index 000000000000..97cff71d2967 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/renesas,raa215300.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RAA215300 Power Management Integrated Circuit (PMIC) + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + The RAA215300 is a high-performance, low-cost 9-channel PMIC designed for + 32-bit and 64-bit MCU and MPU applications. It supports DDR3, DDR3L, DDR4, + and LPDDR4 memory power requirements. The internally compensated regulators, + built-in Real-Time Clock (RTC), 32kHz crystal oscillator, and coin cell + battery charger provide a highly integrated, small footprint power solution + ideal for System-On-Module (SOM) applications. A spread spectrum feature + provides an ease-of-use solution for noise-sensitive audio or RF applications. + + This device exposes two devices via I2C. One for the integrated RTC IP, and + one for everything else. + + Link to datasheet: + https://www.renesas.com/in/en/products/power-power-management/multi-channel-power-management-ics-pmics/ssdsoc-power-management-ics-pmic-and-pmus/raa215300-high-performance-9-channel-pmic-supporting-ddr-memory-built-charger-and-rtc + +properties: + compatible: + enum: + - renesas,raa215300 + + reg: + maxItems: 2 + + reg-names: + items: + - const: main + - const: rtc + + interrupts: + maxItems: 1 + + clocks: + description: | + The clocks are optional. The RTC is disabled, if no clocks are + provided(either xin or clkin). + maxItems: 1 + + clock-names: + description: | + Use xin, if connected to an external crystal. + Use clkin, if connected to an external clock signal. + enum: + - xin + - clkin + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + /* 32.768kHz crystal */ + x2: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + raa215300: pmic@12 { + compatible = "renesas,raa215300"; + reg = <0x12>, <0x6f>; + reg-names = "main", "rtc"; + + clocks = <&x2>; + clock-names = "xin"; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml new file mode 100644 index 000000000000..386989544dac --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps62870.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS62870/TPS62871/TPS62872/TPS62873 voltage regulator + +maintainers: + - Mårten Lindahl <marten.lindahl@axis.com> + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - ti,tps62870 + - ti,tps62871 + - ti,tps62872 + - ti,tps62873 + + reg: + maxItems: 1 + + regulator-initial-mode: + enum: [ 1, 2 ] + description: 1 - Forced PWM mode, 2 - Low power mode + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@41 { + compatible = "ti,tps62873"; + reg = <0x41>; + regulator-name = "+0.75V"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1675000>; + regulator-initial-mode = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml index ee8a2dcf5dfa..0c0135964b91 100644 --- a/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml +++ b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 Reset Controller maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: | Canaan Kendryte K210 reset controller driver which supports the SoC diff --git a/Documentation/devicetree/bindings/riscv/canaan.yaml b/Documentation/devicetree/bindings/riscv/canaan.yaml index f8f3f286bd55..41fd11f70a49 100644 --- a/Documentation/devicetree/bindings/riscv/canaan.yaml +++ b/Documentation/devicetree/bindings/riscv/canaan.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan SoC-based boards maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: Canaan Kendryte K210 SoC-based boards diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml index eb3488d8f9ee..6a7be42da523 100644 --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml @@ -70,6 +70,7 @@ properties: dsr-gpios: true rng-gpios: true dcd-gpios: true + rs485-rts-active-high: true rts-gpio: true power-domains: true clock-frequency: true diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index a5bb561bfcfb..31a3024ea789 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -55,7 +55,9 @@ properties: description: TDM TX current sense time slot. '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -72,7 +74,7 @@ examples: codec: codec@4c { compatible = "ti,tas2562"; reg = <0x4c>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; shutdown-gpios = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index 26088adb9dc2..8908bf1122e9 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -57,7 +57,9 @@ properties: - 1 # Falling edge '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -74,7 +76,7 @@ examples: codec: codec@41 { compatible = "ti,tas2770"; reg = <0x41>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpio = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml index 8cba01316855..a876545ec87d 100644 --- a/Documentation/devicetree/bindings/sound/tas27xx.yaml +++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml @@ -50,7 +50,9 @@ properties: description: TDM TX voltage sense time slot. '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -67,7 +69,7 @@ examples: codec: codec@38 { compatible = "ti,tas2764"; reg = <0x38>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpios = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt index f59125bc79d1..0b4e21bde5bc 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt @@ -8,7 +8,7 @@ Required properties: "ti,tlv320aic32x6" TLV320AIC3206, TLV320AIC3256 "ti,tas2505" TAS2505, TAS2521 - reg: I2C slave address - - supply-*: Required supply regulators are: + - *-supply: Required supply regulators are: "iov" - digital IO power supply "ldoin" - LDO power supply "dv" - Digital core power supply diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml index 2155478bfc4d..a6f34bdd1d3c 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml @@ -14,9 +14,6 @@ maintainers: - Maxime Ripard <mripard@kernel.org> properties: - "#address-cells": true - "#size-cells": true - compatible: const: allwinner,sun4i-a10-spi @@ -46,12 +43,9 @@ properties: - const: rx - const: tx - num-cs: true - patternProperties: "^.*@[0-9a-f]+": type: object - additionalProperties: true properties: reg: items: @@ -71,7 +65,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index de36c6a34a0f..28b8ace63044 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -14,11 +14,9 @@ maintainers: - Maxime Ripard <mripard@kernel.org> properties: - "#address-cells": true - "#size-cells": true - compatible: oneOf: + - const: allwinner,sun50i-r329-spi - const: allwinner,sun6i-a31-spi - const: allwinner,sun8i-h3-spi - items: @@ -28,6 +26,15 @@ properties: - allwinner,sun50i-h616-spi - allwinner,suniv-f1c100s-spi - const: allwinner,sun8i-h3-spi + - items: + - enum: + - allwinner,sun20i-d1-spi + - allwinner,sun50i-r329-spi-dbi + - const: allwinner,sun50i-r329-spi + - items: + - const: allwinner,sun20i-d1-spi-dbi + - const: allwinner,sun50i-r329-spi-dbi + - const: allwinner,sun50i-r329-spi reg: maxItems: 1 @@ -58,12 +65,9 @@ properties: - const: rx - const: tx - num-cs: true - patternProperties: "^.*@[0-9a-f]+": type: object - additionalProperties: true properties: reg: items: @@ -83,7 +87,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml index 6c57dd6c3a36..58367587bfbc 100644 --- a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml +++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml @@ -20,6 +20,10 @@ properties: - items: - const: microchip,sam9x60-spi - const: atmel,at91rm9200-spi + - items: + - const: microchip,sam9x7-spi + - const: microchip,sam9x60-spi + - const: atmel,at91rm9200-spi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml index b310069762dd..4f15f9a0cc34 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml @@ -46,12 +46,28 @@ allOf: maxItems: 2 items: enum: [ qspi, qspi-ocp ] + - if: + properties: + compatible: + contains: + const: amd,pensando-elba-qspi + then: + properties: + cdns,fifo-depth: + enum: [ 128, 256, 1024 ] + default: 1024 + else: + properties: + cdns,fifo-depth: + enum: [ 128, 256 ] + default: 128 properties: compatible: oneOf: - items: - enum: + - amd,pensando-elba-qspi - ti,k2g-qspi - ti,am654-ospi - intel,lgm-qspi @@ -76,8 +92,6 @@ properties: description: Size of the data FIFO in words. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 128, 256 ] - default: 128 cdns,fifo-width: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index ee8f7ea907b0..1696ac46a660 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -29,6 +29,9 @@ properties: reg: maxItems: 1 + iommus: + maxItems: 1 + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml new file mode 100644 index 000000000000..e59183e53690 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/renesas,rzv2m-csi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M Clocked Serial Interface (CSI) + +maintainers: + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + - Geert Uytterhoeven <geert+renesas@glider.be> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: renesas,rzv2m-csi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The clock used to generate the output clock (CSICLK) + - description: Internal clock to access the registers (PCLK) + + clock-names: + items: + - const: csiclk + - const: pclk + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - power-domains + - '#address-cells' + - '#size-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/r9a09g011-cpg.h> + csi4: spi@a4020200 { + compatible = "renesas,rzv2m-csi"; + reg = <0xa4020200 0x80>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_CSI4_CLK>, + <&cpg CPG_MOD R9A09G011_CPERI_GRPH_PCLK>; + clock-names = "csiclk", "pclk"; + resets = <&cpg R9A09G011_CSI_GPH_PRESETN>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml index e0a465d70b0a..79da99ca0e53 100644 --- a/Documentation/devicetree/bindings/spi/samsung,spi.yaml +++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml @@ -35,8 +35,6 @@ properties: minItems: 2 maxItems: 3 - cs-gpios: true - dmas: minItems: 2 maxItems: 2 diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index 12ca108864c6..a47cb144b09f 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -74,6 +74,8 @@ properties: const: intel,keembay-ssi - description: Intel Thunder Bay SPI Controller const: intel,thunderbay-ssi + - description: Intel Mount Evans Integrated Management Complex SPI Controller + const: intel,mountevans-imc-ssi - description: AMD Pensando Elba SoC SPI Controller const: amd,pensando-elba-spi - description: Baikal-T1 SPI Controller diff --git a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml index 597fc4e6b01c..c96131ebbea1 100644 --- a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml +++ b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml @@ -17,9 +17,6 @@ allOf: - $ref: spi-controller.yaml# properties: - "#address-cells": true - "#size-cells": true - compatible: const: socionext,uniphier-scssi diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 90945f59b7e8..524f6fe8c27b 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -17,7 +17,7 @@ description: | properties: $nodename: - pattern: "^spi(@.*|-[0-9a-f])*$" + pattern: "^spi(@.*|-([0-9]|[1-9][0-9]+))?$" "#address-cells": enum: [0, 1] diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml index 20f77246d365..226d8b493b57 100644 --- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml @@ -32,6 +32,12 @@ properties: clocks: maxItems: 2 + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt index b0bee7e42038..ab8b8fccc7af 100644 --- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -8,6 +8,7 @@ Required properties: * marvell,armada380-thermal * marvell,armadaxp-thermal * marvell,armada-ap806-thermal + * marvell,armada-ap807-thermal * marvell,armada-cp110-thermal Note: these bindings are deprecated for AP806/CP110 and should instead diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt deleted file mode 100644 index a3e9ec5dc7ac..000000000000 --- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt +++ /dev/null @@ -1,41 +0,0 @@ -Binding for Thermal Sensor driver for BCM2835 SoCs. - -Required parameters: -------------------- - -compatible: should be one of: "brcm,bcm2835-thermal", - "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" -reg: Address range of the thermal registers. -clocks: Phandle of the clock used by the thermal sensor. -#thermal-sensor-cells: should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml) - -Example: - -thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <80000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - coefficients = <(-538) 407000>; - - cooling-maps { - }; - }; -}; - -thermal: thermal@7e212000 { - compatible = "brcm,bcm2835-thermal"; - reg = <0x7e212000 0x8>; - clocks = <&clocks BCM2835_CLOCK_TSENS>; - #thermal-sensor-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml new file mode 100644 index 000000000000..2b6026d9fbcf --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/brcm,bcm2835-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 thermal sensor + +maintainers: + - Stefan Wahren <stefan.wahren@i2se.com> + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + enum: + - brcm,bcm2835-thermal + - brcm,bcm2836-thermal + - brcm,bcm2837-thermal + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#thermal-sensor-cells": + const: 0 + +unevaluatedProperties: false + +required: + - compatible + - reg + - clocks + - '#thermal-sensor-cells' + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + thermal@7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index d1ec963a6834..27e9e16e6455 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -29,6 +29,8 @@ properties: items: - enum: - qcom,mdm9607-tsens + - qcom,msm8226-tsens + - qcom,msm8909-tsens - qcom,msm8916-tsens - qcom,msm8939-tsens - qcom,msm8974-tsens @@ -48,6 +50,7 @@ properties: - qcom,msm8953-tsens - qcom,msm8996-tsens - qcom,msm8998-tsens + - qcom,qcm2290-tsens - qcom,sc7180-tsens - qcom,sc7280-tsens - qcom,sc8180x-tsens @@ -56,6 +59,7 @@ properties: - qcom,sdm845-tsens - qcom,sm6115-tsens - qcom,sm6350-tsens + - qcom,sm6375-tsens - qcom,sm8150-tsens - qcom,sm8250-tsens - qcom,sm8350-tsens @@ -67,6 +71,12 @@ properties: enum: - qcom,ipq8074-tsens + - description: v2 of TSENS with combined interrupt + items: + - enum: + - qcom,ipq9574-tsens + - const: qcom,ipq8074-tsens + reg: items: - description: TM registers @@ -223,12 +233,7 @@ allOf: contains: enum: - qcom,ipq8064-tsens - - qcom,mdm9607-tsens - - qcom,msm8916-tsens - qcom,msm8960-tsens - - qcom,msm8974-tsens - - qcom,msm8976-tsens - - qcom,qcs404-tsens - qcom,tsens-v0_1 - qcom,tsens-v1 then: @@ -244,22 +249,7 @@ allOf: properties: compatible: contains: - enum: - - qcom,msm8953-tsens - - qcom,msm8996-tsens - - qcom,msm8998-tsens - - qcom,sc7180-tsens - - qcom,sc7280-tsens - - qcom,sc8180x-tsens - - qcom,sc8280xp-tsens - - qcom,sdm630-tsens - - qcom,sdm845-tsens - - qcom,sm6350-tsens - - qcom,sm8150-tsens - - qcom,sm8250-tsens - - qcom,sm8350-tsens - - qcom,sm8450-tsens - - qcom,tsens-v2 + const: qcom,tsens-v2 then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt b/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt deleted file mode 100644 index 39adf54b4388..000000000000 --- a/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt +++ /dev/null @@ -1,25 +0,0 @@ -Broadcom Kona Family timer ------------------------------------------------------ -This timer is used in the following Broadcom SoCs: - BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 - -Required properties: -- compatible : "brcm,kona-timer" -- DEPRECATED: compatible : "bcm,kona-timer" -- reg : Register range for the timer -- interrupts : interrupt for the timer -- clocks: phandle + clock specifier pair of the external clock -- clock-frequency: frequency that the clock operates - -Only one of clocks or clock-frequency should be specified. - -Refer to clocks/clock-bindings.txt for generic clock consumer properties. - -Example: - timer@35006000 { - compatible = "brcm,kona-timer"; - reg = <0x35006000 0x1000>; - interrupts = <0x0 7 0x4>; - clocks = <&hub_timer_clk>; - }; - diff --git a/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml b/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml new file mode 100644 index 000000000000..d6af8383d6fc --- /dev/null +++ b/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/brcm,kona-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family timer + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + const: brcm,kona-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: true + +oneOf: + - required: + - clocks + - required: + - clock-frequency + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm281xx.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + timer@35006000 { + compatible = "brcm,kona-timer"; + reg = <0x35006000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>; + }; +... diff --git a/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml b/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml new file mode 100644 index 000000000000..ad61ae55850b --- /dev/null +++ b/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/loongson,ls1x-pwmtimer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-1 PWM timer + +maintainers: + - Keguang Zhang <keguang.zhang@gmail.com> + +description: + Loongson-1 PWM timer can be used for system clock source + and clock event timers. + +properties: + compatible: + const: loongson,ls1b-pwmtimer + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls1x-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + clocksource: timer@1fe5c030 { + compatible = "loongson,ls1b-pwmtimer"; + reg = <0x1fe5c030 0x10>; + + clocks = <&clkc LS1X_CLKID_APB>; + interrupt-parent = <&intc0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml b/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml new file mode 100644 index 000000000000..daa7832babe3 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/ralink,rt2880-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Timer present in Ralink family SoCs + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +properties: + compatible: + const: ralink,rt2880-timer + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + timer@100 { + compatible = "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + clocks = <&sysc 3>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml index cae46c4982ad..69a93a0722f0 100644 --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml @@ -64,7 +64,7 @@ properties: description: size of memory intended as internal memory for endpoints buffers expressed in KB - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint16 cdns,phyrst-a-enable: description: Enable resetting of PHY if Rx fail is detected diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 50edc4da780e..4f7625955ccc 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -287,7 +287,7 @@ properties: description: High-Speed PHY interface selection between UTMI+ and ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3. - $ref: /schemas/types.yaml#/definitions/uint8 + $ref: /schemas/types.yaml#/definitions/string enum: [utmi, ulpi] snps,quirk-frame-length-adjustment: |