diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
8 files changed, 29 insertions, 11 deletions
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml index 4d9e7c73dce9..90775c2669b8 100644 --- a/Documentation/devicetree/bindings/clock/imx5-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml @@ -57,7 +57,7 @@ examples: }; can@53fc8000 { - compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan"; reg = <0x53fc8000 0x4000>; interrupts = <82>; clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml index 03a76729d26c..7ce06f9f9f8e 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml @@ -76,6 +76,12 @@ properties: resets: maxItems: 1 + wifi-2.4ghz-coexistence: + type: boolean + description: > + Should the pixel frequencies in the WiFi frequencies range be + avoided? + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index f9750b0b6708..27fffafe5b5c 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -159,6 +159,8 @@ properties: - innolux,g121x1-l03 # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel - innolux,n116bge + # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel + - innolux,n125hce-gn1 # InnoLux 15.6" WXGA TFT LCD panel - innolux,n156bge-l21 # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml index 43df15ba8fa4..13875eab2ed6 100644 --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -20,8 +20,6 @@ properties: - fsl,imx8qm-flexcan - fsl,imx8mp-flexcan - fsl,imx6q-flexcan - - fsl,imx53-flexcan - - fsl,imx35-flexcan - fsl,imx28-flexcan - fsl,imx25-flexcan - fsl,p1010-flexcan @@ -30,6 +28,11 @@ properties: - fsl,lx2160ar1-flexcan - items: - enum: + - fsl,imx53-flexcan + - fsl,imx35-flexcan + - const: fsl,imx25-flexcan + - items: + - enum: - fsl,imx7d-flexcan - fsl,imx6ul-flexcan - fsl,imx6sx-flexcan @@ -81,11 +84,12 @@ properties: req_bit is the bit offset of CAN stop request. $ref: /schemas/types.yaml#/definitions/phandle-array items: - - description: The 'gpr' is the phandle to general purpose register node. - - description: The 'req_gpr' is the gpr register offset of CAN stop request. - maximum: 0xff - - description: The 'req_bit' is the bit offset of CAN stop request. - maximum: 0x1f + items: + - description: The 'gpr' is the phandle to general purpose register node. + - description: The 'req_gpr' is the gpr register offset of CAN stop request. + maximum: 0xff + - description: The 'req_bit' is the bit offset of CAN stop request. + maximum: 0x1f fsl,clk-source: description: | diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 3613c2c8f75d..0968b40aef1e 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -33,7 +33,7 @@ tcan4x5x: tcan4x5x@0 { spi-max-frequency = <10000000>; bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; interrupt-parent = <&gpio1>; - interrupts = <14 GPIO_ACTIVE_LOW>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt index cfaf88998918..9e4dc510a40a 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt +++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt @@ -25,7 +25,7 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2): clock-frequency = <100000>; interrupt-parent = <&gpio1>; - interrupts = <29 GPIO_ACTIVE_HIGH>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt index 92f399ec22b8..2bd82562ce8e 100644 --- a/Documentation/devicetree/bindings/net/nfc/pn544.txt +++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt @@ -25,7 +25,7 @@ Example (for ARM-based BeagleBone with PN544 on I2C2): clock-frequency = <400000>; interrupt-parent = <&gpio1>; - interrupts = <17 GPIO_ACTIVE_HIGH>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/rt1015.txt b/Documentation/devicetree/bindings/sound/rt1015.txt index fcfd02d8d32f..e498966d436f 100644 --- a/Documentation/devicetree/bindings/sound/rt1015.txt +++ b/Documentation/devicetree/bindings/sound/rt1015.txt @@ -8,10 +8,16 @@ Required properties: - reg : The I2C address of the device. +Optional properties: + +- realtek,power-up-delay-ms + Set a delay time for flush work to be completed, + this value is adjustable depending on platform. Example: rt1015: codec@28 { compatible = "realtek,rt1015"; reg = <0x28>; + realtek,power-up-delay-ms = <50>; }; |