summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt4
-rw-r--r--Documentation/devicetree/bindings/display/bridge/sii9234.txt49
-rw-r--r--Documentation/devicetree/bindings/display/faraday,tve200.txt54
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi.txt36
-rw-r--r--Documentation/devicetree/bindings/display/msm/edp.txt20
-rw-r--r--Documentation/devicetree/bindings/display/msm/hdmi.txt8
-rw-r--r--Documentation/devicetree/bindings/display/msm/mdp5.txt32
-rw-r--r--Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt21
-rw-r--r--Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt49
-rw-r--r--Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt24
-rw-r--r--Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt23
-rw-r--r--Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt8
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt99
-rw-r--r--Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt12
-rw-r--r--Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt4
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
16 files changed, 396 insertions, 48 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 06668bca7ffc..0047b1394c70 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -68,6 +68,8 @@ Optional properties:
- adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
generator. The chip will rely on the sync signals in the DSI data lanes,
rather than generate its own timings for HDMI output.
+- clocks: from common clock binding: reference to the CEC clock.
+- clock-names: from common clock binding: must be "cec".
Required nodes:
@@ -89,6 +91,8 @@ Example
reg = <39>;
interrupt-parent = <&gpio3>;
interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+ clocks = <&cec_clock>;
+ clock-names = "cec";
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
new file mode 100644
index 000000000000..88041ba23d56
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
@@ -0,0 +1,49 @@
+Silicon Image SiI9234 HDMI/MHL bridge bindings
+
+Required properties:
+ - compatible : "sil,sii9234".
+ - reg : I2C address for TPI interface, use 0x39
+ - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V)
+ - iovcc18-supply : I/O Supply Voltage (1.8V)
+ - avcc12-supply : TMDS Analog Supply Voltage (1.2V)
+ - cvcc12-supply : Digital Core Supply Voltage (1.2V)
+ - interrupts, interrupt-parent: interrupt specifier of INT pin
+ - reset-gpios: gpio specifier of RESET pin (active low)
+ - video interfaces: Device node can contain two video interface port
+ nodes for HDMI encoder and connector according to [1].
+ - port@0 - MHL to HDMI
+ - port@1 - MHL to connector
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+
+Example:
+ sii9234@39 {
+ compatible = "sil,sii9234";
+ reg = <0x39>;
+ avcc33-supply = <&vcc33mhl>;
+ iovcc18-supply = <&vcc18mhl>;
+ avcc12-supply = <&vsil12>;
+ cvcc12-supply = <&vsil12>;
+ reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpf3>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mhl_to_hdmi: endpoint {
+ remote-endpoint = <&hdmi_to_mhl>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ mhl_to_connector: endpoint {
+ remote-endpoint = <&connector_to_mhl>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt
new file mode 100644
index 000000000000..82e3bc0b7485
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/faraday,tve200.txt
@@ -0,0 +1,54 @@
+* Faraday TV Encoder TVE200
+
+Required properties:
+
+- compatible: must be one of:
+ "faraday,tve200"
+ "cortina,gemini-tvc", "faraday,tve200"
+
+- reg: base address and size of the control registers block
+
+- interrupts: contains an interrupt specifier for the interrupt
+ line from the TVE200
+
+- clock-names: should contain "PCLK" for the clock line clocking the
+ silicon and "TVE" for the 27MHz clock to the video driver
+
+- clocks: contains phandle and clock specifier pairs for the entries
+ in the clock-names property. See
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional properties:
+
+- resets: contains the reset line phandle for the block
+
+Required sub-nodes:
+
+- port: describes LCD panel signals, following the common binding
+ for video transmitter interfaces; see
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+ This port should have the properties:
+ reg = <0>;
+ It should have one endpoint connected to a remote endpoint where
+ the display is connected.
+
+Example:
+
+display-controller@6a000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "faraday,tve200";
+ reg = <0x6a000000 0x1000>;
+ interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+ resets = <&syscon GEMINI_RESET_TVC>;
+ clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+ <&syscon GEMINI_CLK_TVC>;
+ clock-names = "PCLK", "TVE";
+
+ port@0 {
+ reg = <0>;
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index fa00e62e1cf6..a6671bd2c85a 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -13,16 +13,16 @@ Required properties:
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: Phandles to device clocks.
- clock-names: the following clocks are required:
- * "mdp_core_clk"
- * "iface_clk"
- * "bus_clk"
- * "core_mmss_clk"
- * "byte_clk"
- * "pixel_clk"
- * "core_clk"
+ * "mdp_core"
+ * "iface"
+ * "bus"
+ * "core_mmss"
+ * "byte"
+ * "pixel"
+ * "core"
For DSIv2, we need an additional clock:
- * "src_clk"
-- assigned-clocks: Parents of "byte_clk" and "pixel_clk" for the given platform.
+ * "src"
+- assigned-clocks: Parents of "byte" and "pixel" for the given platform.
- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
by a DSI PHY block. See [1] for details on clock bindings.
- vdd-supply: phandle to vdd regulator device node
@@ -101,7 +101,7 @@ Required properties:
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: Phandles to device clocks. See [1] for details on clock bindings.
- clock-names: the following clocks are required:
- * "iface_clk"
+ * "iface"
- vddio-supply: phandle to vdd-io regulator device node
Optional properties:
@@ -123,13 +123,13 @@ Example:
reg = <0xfd922800 0x200>;
power-domains = <&mmcc MDSS_GDSC>;
clock-names =
- "bus_clk",
- "byte_clk",
- "core_clk",
- "core_mmss_clk",
- "iface_clk",
- "mdp_core_clk",
- "pixel_clk";
+ "bus",
+ "byte",
+ "core",
+ "core_mmss",
+ "iface",
+ "mdp_core",
+ "pixel";
clocks =
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_BYTE0_CLK>,
@@ -207,7 +207,7 @@ Example:
reg = <0xfd922a00 0xd4>,
<0xfd922b00 0x2b0>,
<0xfd922d80 0x7b>;
- clock-names = "iface_clk";
+ clock-names = "iface";
clocks = <&mmcc MDSS_AHB_CLK>;
#clock-cells = <1>;
vddio-supply = <&pma8084_l12>;
diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt
index e63032be5401..95ce19ca7bc5 100644
--- a/Documentation/devicetree/bindings/display/msm/edp.txt
+++ b/Documentation/devicetree/bindings/display/msm/edp.txt
@@ -12,11 +12,11 @@ Required properties:
- clocks: device clocks
See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
- clock-names: the following clocks are required:
- * "core_clk"
- * "iface_clk"
- * "mdp_core_clk"
- * "pixel_clk"
- * "link_clk"
+ * "core"
+ * "iface"
+ * "mdp_core"
+ * "pixel"
+ * "link"
- #clock-cells: The value should be 1.
- vdda-supply: phandle to vdda regulator device node
- lvl-vdd-supply: phandle to regulator device node which is used to supply power
@@ -41,11 +41,11 @@ Example:
interrupts = <12 0>;
power-domains = <&mmcc MDSS_GDSC>;
clock-names =
- "core_clk",
- "pixel_clk",
- "iface_clk",
- "link_clk",
- "mdp_core_clk";
+ "core",
+ "pixel",
+ "iface",
+ "link",
+ "mdp_core";
clocks =
<&mmcc MDSS_EDPAUX_CLK>,
<&mmcc MDSS_EDPPIXEL_CLK>,
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
index 2d306f402d18..5f90a40da51b 100644
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt
@@ -64,9 +64,9 @@ Example:
interrupts = <GIC_SPI 79 0>;
power-domains = <&mmcc MDSS_GDSC>;
clock-names =
- "core_clk",
- "master_iface_clk",
- "slave_iface_clk";
+ "core",
+ "master_iface",
+ "slave_iface";
clocks =
<&mmcc HDMI_APP_CLK>,
<&mmcc HDMI_M_AHB_CLK>,
@@ -92,7 +92,7 @@ Example:
<0x4a00500 0x100>;
#phy-cells = <0>;
power-domains = <&mmcc MDSS_GDSC>;
- clock-names = "slave_iface_clk";
+ clock-names = "slave_iface";
clocks = <&mmcc HDMI_S_AHB_CLK>;
core-vdda-supply = <&pm8921_hdmi_mvs>;
};
diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
index 30c11ea83754..1b31977a68ba 100644
--- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
+++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt
@@ -22,16 +22,16 @@ Required properties:
Documentation/devicetree/bindings/power/power_domain.txt
- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
- clock-names: the following clocks are required.
- * "iface_clk"
- * "bus_clk"
- * "vsync_clk"
+ * "iface"
+ * "bus"
+ * "vsync"
- #address-cells: number of address cells for the MDSS children. Should be 1.
- #size-cells: Should be 1.
- ranges: parent bus address space is the same as the child bus address space.
Optional properties:
- clock-names: the following clocks are optional:
- * "lut_clk"
+ * "lut"
MDP5:
Required properties:
@@ -45,10 +45,10 @@ Required properties:
through MDP block
- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
- clock-names: the following clocks are required.
-- * "bus_clk"
-- * "iface_clk"
-- * "core_clk"
-- * "vsync_clk"
+- * "bus"
+- * "iface"
+- * "core"
+- * "vsync"
- ports: contains the list of output ports from MDP. These connect to interfaces
that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
special case since it is a part of the MDP block itself).
@@ -77,7 +77,7 @@ Required properties:
Optional properties:
- clock-names: the following clocks are optional:
- * "lut_clk"
+ * "lut"
Example:
@@ -95,9 +95,9 @@ Example:
clocks = <&gcc GCC_MDSS_AHB_CLK>,
<&gcc GCC_MDSS_AXI_CLK>,
<&gcc GCC_MDSS_VSYNC_CLK>;
- clock-names = "iface_clk",
- "bus_clk",
- "vsync_clk"
+ clock-names = "iface",
+ "bus",
+ "vsync"
interrupts = <0 72 0>;
@@ -120,10 +120,10 @@ Example:
<&gcc GCC_MDSS_AXI_CLK>,
<&gcc GCC_MDSS_MDP_CLK>,
<&gcc GCC_MDSS_VSYNC_CLK>;
- clock-names = "iface_clk",
- "bus_clk",
- "core_clk",
- "vsync_clk";
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
ports {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
new file mode 100644
index 000000000000..6862028e7b2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
@@ -0,0 +1,21 @@
+Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
+
+The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
+a MIPI-DSI video interface. Its backlight is managed through the DSI link.
+
+Required properties:
+ - compatible: "orisetech,otm8009a"
+ - reg: the virtual channel number of a DSI peripheral
+
+Optional properties:
+ - reset-gpios: a GPIO spec for the reset pin (active low).
+
+Example:
+&dsi {
+ ...
+ panel@0 {
+ compatible = "orisetech,otm8009a";
+ reg = <0>;
+ reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt
new file mode 100644
index 000000000000..e9e19c059260
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt
@@ -0,0 +1,49 @@
+This binding covers the official 7" (800x480) Raspberry Pi touchscreen
+panel.
+
+This DSI panel contains:
+
+- TC358762 DSI->DPI bridge
+- Atmel microcontroller on I2C for power sequencing the DSI bridge and
+ controlling backlight
+- Touchscreen controller on I2C for touch input
+
+and this binding covers the DSI display parts but not its touch input.
+
+Required properties:
+- compatible: Must be "raspberrypi,7inch-touchscreen-panel"
+- reg: Must be "45"
+- port: See panel-common.txt
+
+Example:
+
+dsi1: dsi@7e700000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ <...>
+
+ port {
+ dsi_out_port: endpoint {
+ remote-endpoint = <&panel_dsi_port>;
+ };
+ };
+};
+
+i2c_dsi: i2c {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&gpio 28 0
+ &gpio 29 0>;
+
+ lcd@45 {
+ compatible = "raspberrypi,7inch-touchscreen-panel";
+ reg = <0x45>;
+
+ port {
+ panel_dsi_port: endpoint {
+ remote-endpoint = <&dsi_out_port>;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
new file mode 100644
index 000000000000..3f1a8392af7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
@@ -0,0 +1,24 @@
+Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode)
+
+Required properties:
+ - compatible: "samsung,s6e63j0x03"
+ - reg: the virtual channel number of a DSI peripheral
+ - vdd3-supply: I/O voltage supply
+ - vci-supply: voltage supply for analog circuits
+ - reset-gpios: a GPIO spec for the reset pin (active low)
+ - te-gpios: a GPIO spec for the tearing effect synchronization signal
+ gpio pin (active high)
+
+Example:
+&dsi {
+ ...
+
+ panel@0 {
+ compatible = "samsung,s6e63j0x03";
+ reg = <0>;
+ vdd3-supply = <&ldo16_reg>;
+ vci-supply = <&ldo20_reg>;
+ reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
+ te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt
new file mode 100644
index 000000000000..aae57ef36cdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt
@@ -0,0 +1,23 @@
+Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel
+
+Required properties:
+- compatible: should be "sii,43wvf1g".
+- "dvdd-supply": 3v3 digital regulator.
+- "avdd-supply": 5v analog regulator.
+
+Optional properties:
+- backlight: phandle for the backlight control.
+
+Example:
+
+ panel {
+ compatible = "sii,43wvf1g";
+ backlight = <&backlight_display>;
+ dvdd-supply = <&reg_lcd_3v3>;
+ avdd-supply = <&reg_lcd_5v>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt
new file mode 100644
index 000000000000..4c0caaf246c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt
@@ -0,0 +1,8 @@
+Toshiba 8.9" WXGA (1280x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "toshiba,lt089ac29000.txt"
+- power-supply: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
new file mode 100644
index 000000000000..da6939efdb43
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
@@ -0,0 +1,99 @@
+Rockchip RK3288 LVDS interface
+================================
+
+Required properties:
+- compatible: matching the soc type, one of
+ - "rockchip,rk3288-lvds";
+
+- reg: physical base address of the controller and length
+ of memory mapped region.
+- clocks: must include clock specifiers corresponding to entries in the
+ clock-names property.
+- clock-names: must contain "pclk_lvds"
+
+- avdd1v0-supply: regulator phandle for 1.0V analog power
+- avdd1v8-supply: regulator phandle for 1.8V analog power
+- avdd3v3-supply: regulator phandle for 3.3V analog power
+
+- rockchip,grf: phandle to the general register files syscon
+- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface
+
+Optional properties:
+- pinctrl-names: must contain a "lcdc" entry.
+- pinctrl-0: pin control group to be used for this controller.
+
+Required nodes:
+
+The lvds has two video ports as described by
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+Their connections are modeled using the OF graph bindings specified in
+ Documentation/devicetree/bindings/graph.txt.
+
+- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
+- video port 1 for either a panel or subsequent encoder
+
+the lvds panel described by
+ Documentation/devicetree/bindings/display/panel/simple-panel.txt
+
+Panel required properties:
+- ports for remote LVDS output
+
+Panel optional properties:
+- data-mapping: should be "vesa-24","jeida-24" or "jeida-18".
+This describes decribed by:
+ Documentation/devicetree/bindings/display/panel/panel-lvds.txt
+
+Example:
+
+lvds_panel: lvds-panel {
+ compatible = "auo,b101ean01";
+ enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ data-mapping = "jeida-24";
+
+ ports {
+ panel_in_lvds: endpoint {
+ remote-endpoint = <&lvds_out_panel>;
+ };
+ };
+};
+
+For Rockchip RK3288:
+
+ lvds: lvds@ff96c000 {
+ compatible = "rockchip,rk3288-lvds";
+ rockchip,grf = <&grf>;
+ reg = <0xff96c000 0x4000>;
+ clocks = <&cru PCLK_LVDS_PHY>;
+ clock-names = "pclk_lvds";
+ pinctrl-names = "lcdc";
+ pinctrl-0 = <&lcdc_ctl>;
+ avdd1v0-supply = <&vdd10_lcd>;
+ avdd1v8-supply = <&vcc18_lcd>;
+ avdd3v3-supply = <&vcca_33>;
+ rockchip,output = "rgb";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lvds_in: port@0 {
+ reg = <0>;
+
+ lvds_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_lvds>;
+ };
+ lvds_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_lvds>;
+ };
+ };
+
+ lvds_out: port@1 {
+ reg = <1>;
+
+ lvds_out_panel: endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index b7faa6f6a326..50cc72ee1168 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -40,15 +40,19 @@ CEC. It is one end of the pipeline.
Required properties:
- compatible: value must be one of:
+ * allwinner,sun4i-a10-hdmi
* allwinner,sun5i-a10s-hdmi
+ * allwinner,sun6i-a31-hdmi
- reg: base address and size of memory-mapped region
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the HDMI encoder
* ahb: the HDMI interface clock
* mod: the HDMI module clock
+ * ddc: the HDMI ddc clock (A31 only)
* pll-0: the first video PLL
* pll-1: the second video PLL
- clock-names: the clock names mentioned above
+ - resets: phandle to the reset control for the HDMI encoder (A31 only)
- dmas: phandles to the DMA channels used by the HDMI encoder
* ddc-tx: The channel for DDC transmission
* ddc-rx: The channel for DDC reception
@@ -83,9 +87,11 @@ The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
Required properties:
- compatible: value must be either:
+ * allwinner,sun4i-a10-tcon
* allwinner,sun5i-a13-tcon
* allwinner,sun6i-a31-tcon
* allwinner,sun6i-a31s-tcon
+ * allwinner,sun7i-a20-tcon
* allwinner,sun8i-a33-tcon
* allwinner,sun8i-v3s-tcon
- reg: base address and size of memory-mapped region
@@ -150,8 +156,10 @@ system.
Required properties:
- compatible: value must be one of:
+ * allwinner,sun4i-a10-display-backend
* allwinner,sun5i-a13-display-backend
* allwinner,sun6i-a31-display-backend
+ * allwinner,sun7i-a20-display-backend
* allwinner,sun8i-a33-display-backend
- reg: base address and size of the memory-mapped region.
- interrupts: interrupt associated to this IP
@@ -182,8 +190,10 @@ deinterlacing and color space conversion.
Required properties:
- compatible: value must be one of:
+ * allwinner,sun4i-a10-display-frontend
* allwinner,sun5i-a13-display-frontend
* allwinner,sun6i-a31-display-frontend
+ * allwinner,sun7i-a20-display-frontend
* allwinner,sun8i-a33-display-frontend
- reg: base address and size of the memory-mapped region.
- interrupts: interrupt associated to this IP
@@ -228,10 +238,12 @@ extra node.
Required properties:
- compatible: value must be one of:
+ * allwinner,sun4i-a10-display-engine
* allwinner,sun5i-a10s-display-engine
* allwinner,sun5i-a13-display-engine
* allwinner,sun6i-a31-display-engine
* allwinner,sun6i-a31s-display-engine
+ * allwinner,sun7i-a20-display-engine
* allwinner,sun8i-a33-display-engine
* allwinner,sun8i-v3s-display-engine
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 74e1e8add5a1..844e0103fb0d 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -3,6 +3,10 @@ NVIDIA Tegra host1x
Required properties:
- compatible: "nvidia,tegra<chip>-host1x"
- reg: Physical base address and length of the controller's registers.
+ For pre-Tegra186, one entry describing the whole register area.
+ For Tegra186, one entry for each entry in reg-names:
+ "vm" - VM region assigned to Linux
+ "hypervisor" - Hypervisor region (only if Linux acts as hypervisor)
- interrupts: The interrupt outputs from the controller.
- #address-cells: The number of cells used to represent physical base addresses
in the host1x address space. Should be 1.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 0f295a4798ad..1db9dbef3e56 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -254,6 +254,7 @@ opencores OpenCores.org
openrisc OpenRISC.io
option Option NV
ORCL Oracle Corporation
+orisetech Orise Technology
ortustech Ortus Technology Co., Ltd.
ovti OmniVision Technologies
oxsemi Oxford Semiconductor, Ltd.