diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
9 files changed, 89 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index 17e4f20c8d39..6834f5e8df5f 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -23,7 +23,7 @@ properties: compatible: items: - const: raspberrypi,bcm2835-firmware - - const: simple-bus + - const: simple-mfd mboxes: $ref: '/schemas/types.yaml#/definitions/phandle' @@ -57,7 +57,7 @@ required: examples: - | firmware { - compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; + compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; mboxes = <&mailbox>; firmware_clocks: clocks { diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml index 85ef69ffebed..1465c9ebaf93 100644 --- a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml +++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml @@ -67,7 +67,7 @@ examples: main_crypto: crypto@4e00000 { compatible = "ti,j721-sa2ul"; - reg = <0x0 0x4e00000 0x0 0x1200>; + reg = <0x4e00000 0x1200>; power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>; dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>; diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml index 52a939cade3b..7b9d468c3e52 100644 --- a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml +++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml @@ -145,10 +145,10 @@ examples: display@fd4a0000 { compatible = "xlnx,zynqmp-dpsub-1.7"; - reg = <0x0 0xfd4a0000 0x0 0x1000>, - <0x0 0xfd4aa000 0x0 0x1000>, - <0x0 0xfd4ab000 0x0 0x1000>, - <0x0 0xfd4ac000 0x0 0x1000>; + reg = <0xfd4a0000 0x1000>, + <0xfd4aa000 0x1000>, + <0xfd4ab000 0x1000>, + <0xfd4ac000 0x1000>; reg-names = "dp", "blend", "av_buf", "aud"; interrupts = <0 119 4>; interrupt-parent = <&gic>; diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml index 5de510f8c88c..2a595b18ff6c 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml +++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml @@ -57,7 +57,7 @@ examples: dma: dma-controller@fd4c0000 { compatible = "xlnx,zynqmp-dpdma"; - reg = <0x0 0xfd4c0000 0x0 0x1000>; + reg = <0xfd4c0000 0x1000>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; clocks = <&dpdma_clk>; diff --git a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt index d4d83916c09d..be329ea4794f 100644 --- a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt +++ b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt @@ -20,8 +20,9 @@ Required properties: - gpio-controller : Marks the device node as a GPIO controller - interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt - interrupt-controller : Mark the GPIO controller as an interrupt-controller -- ngpios : number of GPIO lines, see gpio.txt - (should be multiple of 8, up to 80 pins) +- ngpios : number of *hardware* GPIO lines, see gpio.txt. This will expose + 2 software GPIOs per hardware GPIO: one for hardware input, one for hardware + output. Up to 80 pins, must be a multiple of 8. - clocks : A phandle to the APB clock for SGPM clock division - bus-frequency : SGPM CLK frequency diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml index 24ad1446445e..fe7fa25877fd 100644 --- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml @@ -30,7 +30,7 @@ properties: const: 0 patternProperties: - "^multi-led[0-9a-f]$": + "^multi-led@[0-9a-b]$": type: object allOf: - $ref: leds-class-multicolor.yaml# diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt deleted file mode 100644 index 0727079d2410..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/imx274.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor - -The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with -an active array size of 3864H x 2202V. It is programmable through I2C -interface. The I2C address is fixed to 0x1a as per sensor data sheet. -Image data is sent through MIPI CSI-2, which is configured as 4 lanes -at 1440 Mbps. - - -Required Properties: -- compatible: value should be "sony,imx274" for imx274 sensor -- reg: I2C bus address of the device - -Optional Properties: -- reset-gpios: Sensor reset GPIO -- clocks: Reference to the input clock. -- clock-names: Should be "inck". -- VANA-supply: Sensor 2.8v analog supply. -- VDIG-supply: Sensor 1.8v digital core supply. -- VDDL-supply: Sensor digital IO 1.2v supply. - -The imx274 device node should contain one 'port' child node with -an 'endpoint' subnode. For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: - sensor@1a { - compatible = "sony,imx274"; - reg = <0x1a>; - #address-cells = <1>; - #size-cells = <0>; - reset-gpios = <&gpio_sensor 0 0>; - port { - sensor_out: endpoint { - remote-endpoint = <&csiss_in>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml new file mode 100644 index 000000000000..f697e1a20beb --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor + +maintainers: + - Leon Luo <leonl@leopardimaging.com> + +description: | + The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an + active array size of 3864H x 2202V. It is programmable through I2C interface. + Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440 + Mbps. + +properties: + compatible: + const: sony,imx274 + + reg: + const: 0x1a + + reset-gpios: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: inck + + vana-supply: + description: Sensor 2.8 V analog supply. + maxItems: 1 + + vdig-supply: + description: Sensor 1.8 V digital core supply. + maxItems: 1 + + vddl-supply: + description: Sensor digital IO 1.2 V supply. + maxItems: 1 + + port: + type: object + description: Output video port. See ../video-interfaces.txt. + +required: + - compatible + - reg + - port + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + imx274: camera-sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + reset-gpios = <&gpio_sensor 0 0>; + + port { + sensor_out: endpoint { + remote-endpoint = <&csiss_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 032b76f14f4f..9119f1caf391 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -21,6 +21,7 @@ Required properties: - "renesas,etheravb-r8a774a1" for the R8A774A1 SoC. - "renesas,etheravb-r8a774b1" for the R8A774B1 SoC. - "renesas,etheravb-r8a774c0" for the R8A774C0 SoC. + - "renesas,etheravb-r8a774e1" for the R8A774E1 SoC. - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - "renesas,etheravb-r8a7796" for the R8A77960 SoC. - "renesas,etheravb-r8a77961" for the R8A77961 SoC. |