diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
24 files changed, 58 insertions, 56 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml index c612e1f48dba..ff91df04f9f4 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml @@ -8,7 +8,8 @@ title: Atmel AT91 device tree bindings. maintainers: - Alexandre Belloni <alexandre.belloni@bootlin.com> - - Ludovic Desroches <ludovic.desroches@microchip.com> + - Claudiu Beznea <claudiu.beznea@microchip.com> + - Nicolas Ferre <nicolas.ferre@microchip.com> description: | Boards with a SoC of the Atmel AT91 or SMART family shall have the following diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt index b5cb374dc47d..10a91cc8b997 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt @@ -8,7 +8,7 @@ Required properties: - compatible: Should contain a chip-specific compatible string, Chip-specific strings are of the form "fsl,<chip>-dcfg", The following <chip>s are known to be supported: - ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. + ls1012a, ls1021a, ls1043a, ls1046a, ls2080a, lx2160a - reg : should contain base address and length of DCFG memory-mapped registers diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index e77635c5422c..fa8b31660cad 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -119,6 +119,9 @@ Boards (incomplete list of examples): - OMAP3 BeagleBoard : Low cost community board compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3" +- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk + compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3" + - OMAP3 Tobi with Overo : Commercial expansion board with daughter board compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3" diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 370aab274cd1..04ff0b55bb85 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -48,7 +48,6 @@ description: | sdx65 sm7225 sm8150 - sdx65 sm8250 sm8350 sm8450 @@ -230,11 +229,6 @@ properties: - items: - enum: - - qcom,sdx65-mtp - - const: qcom,sdx65 - - - items: - - enum: - qcom,ipq6018-cp01 - qcom,ipq6018-cp01-c1 - const: qcom,ipq6018 diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index f7d48f23da44..10119d9ef4b1 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -44,6 +44,7 @@ Required properties: * "fsl,ls1046a-clockgen" * "fsl,ls1088a-clockgen" * "fsl,ls2080a-clockgen" + * "fsl,lx2160a-clockgen" Chassis-version clock strings include: * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks * "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 1d3e88daca04..25b5ef3f759c 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -91,22 +91,7 @@ properties: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false description: - MIPI DSI/DPI input. - - properties: - endpoint: - $ref: /schemas/media/video-interfaces.yaml# - type: object - additionalProperties: false - - properties: - remote-endpoint: true - - bus-type: - enum: [1, 5] - default: 1 - - data-lanes: true + Video port for MIPI DSI input. port@1: $ref: /schemas/graph.yaml#/properties/port @@ -155,8 +140,6 @@ examples: reg = <0>; anx7625_in: endpoint { remote-endpoint = <&mipi_dsi>; - bus-type = <5>; - data-lanes = <0 1 2 3>; }; }; diff --git a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml index e04349567eeb..427c5873f96a 100644 --- a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml @@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: SiFive GPIO controller maintainers: - - Yash Shah <yash.shah@sifive.com> - Paul Walmsley <paul.walmsley@sifive.com> properties: diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml index 79d0358e2f61..620f01775e42 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml @@ -36,6 +36,7 @@ properties: - renesas,intc-ex-r8a77980 # R-Car V3H - renesas,intc-ex-r8a77990 # R-Car E3 - renesas,intc-ex-r8a77995 # R-Car D3 + - renesas,intc-ex-r8a779a0 # R-Car V3U - const: renesas,irqc '#interrupt-cells': diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index 28b6b17fe4b2..27092c6a86c4 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -35,6 +35,10 @@ description: contains a specific memory layout, which is documented in chapter 8 of the SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>. + The thead,c900-plic is different from sifive,plic-1.0.0 in opensbi, the + T-HEAD PLIC implementation requires setting a delegation bit to allow access + from S-mode. So add thead,c900-plic to distinguish them. + maintainers: - Sagar Kadam <sagar.kadam@sifive.com> - Paul Walmsley <paul.walmsley@sifive.com> @@ -42,12 +46,17 @@ maintainers: properties: compatible: - items: - - enum: - - sifive,fu540-c000-plic - - starfive,jh7100-plic - - canaan,k210-plic - - const: sifive,plic-1.0.0 + oneOf: + - items: + - enum: + - sifive,fu540-c000-plic + - starfive,jh7100-plic + - canaan,k210-plic + - const: sifive,plic-1.0.0 + - items: + - enum: + - allwinner,sun20i-d1-plic + - const: thead,c900-plic reg: maxItems: 1 @@ -62,6 +71,7 @@ properties: interrupts-extended: minItems: 1 + maxItems: 15872 description: Specifies which contexts are connected to the PLIC, with "-1" specifying that a context is not present. Each node pointed to should be a @@ -90,12 +100,11 @@ examples: #interrupt-cells = <1>; compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; interrupt-controller; - interrupts-extended = < - &cpu0_intc 11 - &cpu1_intc 11 &cpu1_intc 9 - &cpu2_intc 11 &cpu2_intc 9 - &cpu3_intc 11 &cpu3_intc 9 - &cpu4_intc 11 &cpu4_intc 9>; + interrupts-extended = <&cpu0_intc 11>, + <&cpu1_intc 11>, <&cpu1_intc 9>, + <&cpu2_intc 11>, <&cpu2_intc 9>, + <&cpu3_intc 11>, <&cpu3_intc 9>, + <&cpu4_intc 11>, <&cpu4_intc 9>; reg = <0xc000000 0x4000000>; riscv,ndev = <10>; }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml index be4a2df71c25..b85819fbb07c 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml @@ -39,7 +39,7 @@ patternProperties: '^phy@[a-f0-9]+$': $ref: ../phy/bcm-ns-usb2-phy.yaml - '^pin-controller@[a-f0-9]+$': + '^pinctrl@[a-f0-9]+$': $ref: ../pinctrl/brcm,ns-pinmux.yaml '^syscon@[a-f0-9]+$': @@ -94,7 +94,7 @@ examples: reg = <0x180 0x4>; }; - pin-controller@1c0 { + pinctrl@1c0 { compatible = "brcm,bcm4708-pinmux"; reg = <0x1c0 0x24>; reg-names = "cru_gpio_control"; diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml index c00ad3e21c21..ad285cb480c9 100644 --- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml +++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml @@ -126,7 +126,7 @@ properties: clock-frequency: const: 12288000 - lochnagar-pinctrl: + pinctrl: type: object $ref: /schemas/pinctrl/cirrus,lochnagar.yaml# @@ -255,7 +255,7 @@ required: - reg - reset-gpios - lochnagar-clk - - lochnagar-pinctrl + - pinctrl additionalProperties: false @@ -293,7 +293,7 @@ examples: clock-frequency = <32768>; }; - lochnagar-pinctrl { + pinctrl { compatible = "cirrus,lochnagar-pinctrl"; gpio-controller; diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml index 272832e9f8f2..fa86691ebf16 100644 --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml @@ -20,7 +20,7 @@ description: | maintainers: - Kishon Vijay Abraham I <kishon@ti.com> - - Roger Quadros <rogerq@ti.com + - Roger Quadros <rogerq@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 0968b40aef1e..e3501bfa22e9 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 { #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <10000000>; - bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; + bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>; interrupt-parent = <&gpio1>; interrupts = <14 IRQ_TYPE_LEVEL_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index b86edf67ce62..58ecc62adfaa 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -107,6 +107,10 @@ properties: - const: imem - const: config + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the AOSS side-channel message RAM + qcom,smem-states: $ref: /schemas/types.yaml#/definitions/phandle-array description: State bits used in by the AP to signal the modem. @@ -222,6 +226,8 @@ examples: "imem", "config"; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&ipa_smp2p_out 0>, <&ipa_smp2p_out 1>; qcom,smem-state-names = "ipa-clock-enabled-valid", diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml index cbbf5e8b1197..f78d3246fbdc 100644 --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -8,7 +8,7 @@ title: OMAP USB2 PHY maintainers: - Kishon Vijay Abraham I <kishon@ti.com> - - Roger Quadros <rogerq@ti.com> + - Roger Quadros <rogerq@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml index 6107880e5246..02b76f15e717 100644 --- a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml +++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml @@ -37,6 +37,12 @@ properties: max bit rate supported in bps minimum: 1 + mux-states: + description: + mux controller node to route the signals from controller to + transceiver. + maxItems: 1 + required: - compatible - '#phy-cells' @@ -53,4 +59,5 @@ examples: max-bitrate = <5000000>; standby-gpios = <&wakeup_gpio1 16 GPIO_ACTIVE_LOW>; enable-gpios = <&main_gpio1 67 GPIO_ACTIVE_HIGH>; + mux-states = <&mux0 1>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml index c85f759ae5a3..8a90d8273767 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml @@ -107,9 +107,6 @@ properties: additionalProperties: false -allOf: - - $ref: "pinctrl.yaml#" - required: - pinctrl-0 - pinctrl-names diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml index 84e66913d042..db41cd7bf150 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml @@ -8,7 +8,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: SiFive PWM controller maintainers: - - Yash Shah <yash.shah@sifive.com> - Sagar Kadam <sagar.kadam@sifive.com> - Paul Walmsley <paul.walmsley@sifive.com> diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml index 2b1f91603897..e2d330bd4608 100644 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml @@ -9,7 +9,6 @@ title: SiFive L2 Cache Controller maintainers: - Sagar Kadam <sagar.kadam@sifive.com> - - Yash Shah <yash.shah@sifive.com> - Paul Walmsley <paul.walmsley@sifive.com> description: diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml index 77adbebed824..c3e9f3485449 100644 --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml @@ -8,6 +8,7 @@ title: Audio codec controlled by ChromeOS EC maintainers: - Cheng-Yi Chiang <cychiang@chromium.org> + - Tzung-Bi Shih <tzungbi@google.com> description: | Google's ChromeOS EC codec is a digital mic codec provided by the diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 5dd209206e88..3ec2d7b83775 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -23,8 +23,9 @@ properties: minItems: 1 maxItems: 256 items: - minimum: 0 - maximum: 256 + items: + - minimum: 0 + maximum: 256 description: Chip select used by the device. diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index f00867ebc147..481aaa09f3f2 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -53,6 +53,7 @@ properties: - const: st,stm32mp15-hsotg - const: snps,dwc2 - const: samsung,s3c6400-hsotg + - const: intel,socfpga-agilex-hsotg reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index a634774c537c..eedde385d299 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Bindings for the TI wrapper module for the Cadence USBSS-DRD controller maintainers: - - Roger Quadros <rogerq@ti.com> + - Roger Quadros <rogerq@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml index f6e91a5fd8fe..4f7a212fddd3 100644 --- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI Keystone Soc USB Controller maintainers: - - Roger Quadros <rogerq@ti.com> + - Roger Quadros <rogerq@kernel.org> properties: compatible: |