diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r-- | Documentation/devicetree/bindings/spi/spi-controller.yaml | 69 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml | 87 |
2 files changed, 89 insertions, 67 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 8246891602e7..36b72518f565 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -94,73 +94,8 @@ patternProperties: "^.*@[0-9a-f]+$": type: object - properties: - compatible: - description: - Compatible of the SPI device. - - reg: - minItems: 1 - maxItems: 256 - items: - minimum: 0 - maximum: 256 - description: - Chip select used by the device. - - spi-3wire: - $ref: /schemas/types.yaml#/definitions/flag - description: - The device requires 3-wire mode. - - spi-cpha: - $ref: /schemas/types.yaml#/definitions/flag - description: - The device requires shifted clock phase (CPHA) mode. - - spi-cpol: - $ref: /schemas/types.yaml#/definitions/flag - description: - The device requires inverse clock polarity (CPOL) mode. - - spi-cs-high: - $ref: /schemas/types.yaml#/definitions/flag - description: - The device requires the chip select active high. - - spi-lsb-first: - $ref: /schemas/types.yaml#/definitions/flag - description: - The device requires the LSB first mode. - - spi-max-frequency: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - Maximum SPI clocking speed of the device in Hz. - - spi-rx-bus-width: - description: - Bus width to the SPI bus used for read transfers. - If 0 is provided, then no RX will be possible on this device. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 4, 8] - default: 1 - - spi-rx-delay-us: - description: - Delay, in microseconds, after a read transfer. - - spi-tx-bus-width: - description: - Bus width to the SPI bus used for write transfers. - If 0 is provided, then no TX will be possible on this device. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 4, 8] - default: 1 - - spi-tx-delay-us: - description: - Delay, in microseconds, after a write transfer. + allOf: + - $ref: spi-peripheral-props.yaml required: - compatible diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml new file mode 100644 index 000000000000..105fa2840e72 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-peripheral-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral-specific properties for a SPI bus. + +description: + Many SPI controllers need to add properties to peripheral devices. They could + be common properties like spi-max-frequency, spi-cpha, etc. or they could be + controller specific like delay in clock or data lines, etc. These properties + need to be defined in the peripheral node because they are per-peripheral and + there can be multiple peripherals attached to a controller. All those + properties are listed here. The controller specific properties should go in + their own separate schema that should be referenced from here. + +maintainers: + - Pratyush Yadav <p.yadav@ti.com> + +properties: + reg: + minItems: 1 + maxItems: 256 + items: + minimum: 0 + maximum: 256 + description: + Chip select used by the device. + + spi-3wire: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires 3-wire mode. + + spi-cpha: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires shifted clock phase (CPHA) mode. + + spi-cpol: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires inverse clock polarity (CPOL) mode. + + spi-cs-high: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires the chip select active high. + + spi-lsb-first: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires the LSB first mode. + + spi-max-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum SPI clocking speed of the device in Hz. + + spi-rx-bus-width: + description: + Bus width to the SPI bus used for read transfers. + If 0 is provided, then no RX will be possible on this device. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 4, 8] + default: 1 + + spi-rx-delay-us: + description: + Delay, in microseconds, after a read transfer. + + spi-tx-bus-width: + description: + Bus width to the SPI bus used for write transfers. + If 0 is provided, then no TX will be possible on this device. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 4, 8] + default: 1 + + spi-tx-delay-us: + description: + Delay, in microseconds, after a write transfer. + +# The controller specific properties go here. + +additionalProperties: true |