diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
45 files changed, 1542 insertions, 1051 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml new file mode 100644 index 000000000000..192ded470e32 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,integrator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Integrator Boards Device Tree Bindings + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: |+ + These were the first ARM platforms officially supported by ARM Ltd. + They are ARMv4, ARMv5 and ARMv6-capable using different core tiles, + so the system is modular and can host a variety of CPU tiles called + "core tiles" and referred to in the device tree as "core modules". + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: ARM Integrator Application Platform, this board has a PCI + host and several PCI slots, as well as a number of slots for logical + expansion modules, it is referred to as an "ASIC Development + Motherboard" and is extended with custom FPGA and is intended for + rapid prototyping. See ARM DUI 0098B. This board can physically come + pre-packaged in a PC Tower form factor called Integrator/PP1 or a + special metal fixture called Integrator/PP2, see ARM DUI 0169A. + items: + - const: arm,integrator-ap + - description: ARM Integrator Compact Platform (HBI-0086), this board has + a compact form factor and mainly consists of the bare minimum + peripherals to make use of the core module. See ARM DUI 0159B. + items: + - const: arm,integrator-cp + - description: ARM Integrator Standard Development Board (SDB) Platform, + this board is a PCI-based board conforming to the Microsoft SDB + (HARP) specification. See ARM DUI 0099A. + items: + - const: arm,integrator-sp + + core-module@10000000: + type: object + description: the root node in the Integrator platforms must contain + a core module child node. They are always at physical address + 0x10000000 in all the Integrator variants. + properties: + compatible: + items: + - const: arm,core-module-integrator + - const: syscon + - const: simple-mfd + reg: + maxItems: 1 + + required: + - compatible + - reg + +patternProperties: + "^syscon@[0-9a-f]+$": + description: All Integrator boards must provide a system controller as a + node in the root of the device tree. + type: object + properties: + compatible: + items: + - enum: + - arm,integrator-ap-syscon + - arm,integrator-cp-syscon + - arm,integrator-sp-syscon + - const: syscon + reg: + maxItems: 1 + + required: + - compatible + - reg + + +required: + - compatible + - core-module@10000000 + +... diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml new file mode 100644 index 000000000000..d6e85d198afe --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,realview.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM RealView Boards Device Tree Bindings + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: |+ + The ARM RealView series of reference designs were built to explore the ARM + 11, Cortex A-8 and Cortex A-9 CPUs. This included new features compared to + the earlier CPUs such as TrustZone and multicore (MPCore). + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: ARM RealView Emulation Baseboard (HBI-0140) was created + as a generic platform to test different FPGA designs, and has + pluggable CPU modules, see ARM DUI 0303E. + items: + - const: arm,realview-eb + - description: ARM RealView Platform Baseboard for ARM1176JZF-S + (HBI-0147) was created as a development board to test ARM TrustZone, + CoreSight and Intelligent Energy Management (IEM) see ARM DUI 0425F. + items: + - const: arm,realview-pb1176 + - description: ARM RealView Platform Baseboard for ARM 11 MPCore + (HBI-0159, HBI-0175 and HBI-0176) was created to showcase + multiprocessing with ARM11 using MPCore using symmetric + multiprocessing (SMP). See ARM DUI 0351E. + items: + - const: arm,realview-pb11mp + - description: ARM RealView Platform Baseboard for Cortex-A8 (HBI-0178, + HBI-0176 and HBI-0175) was the first reference platform for the + Cortex CPU family, including a Cortex-A8 test chip. + items: + - const: arm,realview-pba8 + - description: ARM RealView Platform Baseboard Explore for Cortex-A9 + (HBI-0182 and HBI-0183) was the reference platform for the Cortex-A9 + CPU. + items: + - const: arm,realview-pbx + + soc: + description: All RealView boards must provide a soc node in the root of the + device tree, representing the System-on-Chip since these test chips are + rather complex. + type: object + properties: + compatible: + oneOf: + - items: + - const: arm,realview-eb-soc + - const: simple-bus + - items: + - const: arm,realview-pb1176-soc + - const: simple-bus + - items: + - const: arm,realview-pb11mp-soc + - const: simple-bus + - items: + - const: arm,realview-pba8-soc + - const: simple-bus + - items: + - const: arm,realview-pbx-soc + - const: simple-bus + + patternProperties: + "^.*syscon@[0-9a-f]+$": + type: object + description: All RealView boards must provide a syscon system controller + node inside the soc node. + properties: + compatible: + oneOf: + - items: + - const: arm,realview-eb11mp-revb-syscon + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd + - items: + - const: arm,realview-eb11mp-revc-syscon + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd + - items: + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd + - items: + - const: arm,realview-pb1176-syscon + - const: syscon + - const: simple-mfd + - items: + - const: arm,realview-pb11mp-syscon + - const: syscon + - const: simple-mfd + - items: + - const: arm,realview-pba8-syscon + - const: syscon + - const: simple-mfd + - items: + - const: arm,realview-pbx-syscon + - const: syscon + - const: simple-mfd + + required: + - compatible + - reg + + required: + - compatible + +required: + - compatible + - soc + +... diff --git a/Documentation/devicetree/bindings/arm/arm,versatile.yaml b/Documentation/devicetree/bindings/arm/arm,versatile.yaml new file mode 100644 index 000000000000..06efd2a075c9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,versatile.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,versatile.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile Boards Device Tree Bindings + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: |+ + The ARM Versatile boards are two variants of ARM926EJ-S evaluation boards + with various pluggable interface boards, in essence the Versatile PB version + is a superset of the Versatile AB version. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: The ARM Versatile Application Baseboard (HBI-0118) is an + evaluation board specifically for the ARM926EJ-S. It can be connected + to an IB1 interface board for a touchscreen-type use case or an IB2 + for a candybar phone-type use case. See ARM DUI 0225D. + items: + - const: arm,versatile-ab + - description: The ARM Versatile Platform Baseboard (HBI-0117) is an + extension of the Versatile Application Baseboard that includes a + PCI host controller. Like the sibling board, it is done specifically + for ARM926EJ-S. See ARM DUI 0224B. + items: + - const: arm,versatile-pb + + core-module@10000000: + type: object + description: the root node in the Versatile platforms must contain + a core module child node. They are always at physical address + 0x10000000 in all the Versatile variants. + properties: + compatible: + items: + - const: arm,core-module-versatile + - const: syscon + - const: simple-mfd + reg: + maxItems: 1 + + required: + - compatible + - reg + +patternProperties: + "^syscon@[0-9a-f]+$": + type: object + description: When fitted with the IB2 Interface Board, the Versatile + AB will present an optional system controller node which controls the + extra peripherals on the interface board. + properties: + compatible: + contains: + const: arm,versatile-ib2-syscon + required: + - compatible + - reg + +required: + - compatible + - core-module@10000000 + +... diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml new file mode 100644 index 000000000000..8c06a73f716c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,vexpress-juno.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile Express and Juno Boards Device Tree Bindings + +maintainers: + - Sudeep Holla <sudeep.holla@arm.com> + - Linus Walleij <linus.walleij@linaro.org> + +description: |+ + ARM's Versatile Express platform were built as reference designs for exploring + multicore Cortex-A class systems. The Versatile Express family contains both + 32 bit (Aarch32) and 64 bit (Aarch64) systems. + + The board consist of a motherboard and one or more daughterboards (tiles). The + motherboard provides a set of peripherals. Processor and RAM "live" on the + tiles. + + The motherboard and each core tile should be described by a separate Device + Tree source file, with the tile's description including the motherboard file + using an include directive. As the motherboard can be initialized in one of + two different configurations ("memory maps"), care must be taken to include + the correct one. + + When a new generation of boards were introduced under the name "Juno", these + shared to many common characteristics with the Versatile Express that the + "arm,vexpress" compatible was retained in the root node, and these are + included in this binding schema as well. + + The root node indicates the CPU SoC on the core tile, and this + is a daughterboard to the main motherboard. The name used in the compatible + string shall match the name given in the core tile's technical reference + manual, followed by "arm,vexpress" as an additional compatible value. If + further subvariants are released of the core tile, even more fine-granular + compatible strings with up to three compatible strings are used. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: CoreTile Express A9x4 (V2P-CA9) has 4 Cortex A9 CPU cores + in MPCore configuration in a test chip on the core tile. See ARM + DUI 0448I. This was the first Versatile Express platform. + items: + - const: arm,vexpress,v2p-ca9 + - const: arm,vexpress + - description: CoreTile Express A5x2 (V2P-CA5s) has 2 Cortex A5 CPU cores + in a test chip on the core tile. It is intended to evaluate NEON, FPU + and Jazelle support in the Cortex A5 family. See ARM DUI 0541C. + items: + - const: arm,vexpress,v2p-ca5s + - const: arm,vexpress + - description: Coretile Express A15x2 (V2P-CA15) has 2 Cortex A15 CPU + cores in a MPCore configuration in a test chip on the core tile. See + ARM DUI 0604F. + items: + - const: arm,vexpress,v2p-ca15 + - const: arm,vexpress + - description: CoreTile Express A15x4 (V2P-CA15, HBI-0237A) has 4 Cortex + A15 CPU cores in a test chip on the core tile. This is the first test + chip called "TC1". + items: + - const: arm,vexpress,v2p-ca15,tc1 + - const: arm,vexpress,v2p-ca15 + - const: arm,vexpress + - description: Coretile Express A15x2 A7x3 (V2P-CA15_A7) has 2 Cortex A15 + CPU cores and 3 Cortex A7 cores in a big.LITTLE MPCore configuration + in a test chip on the core tile. See ARM DDI 0503I. + items: + - const: arm,vexpress,v2p-ca15_a7 + - const: arm,vexpress + - description: LogicTile Express 20MG (V2F-1XV7) has 2 Cortex A53 CPU + cores in a test chip on the core tile. See ARM DDI 0498D. + items: + - const: arm,vexpress,v2f-1xv7,ca53x2 + - const: arm,vexpress,v2f-1xv7 + - const: arm,vexpress + - description: Arm Versatile Express Juno "r0" (the first Juno board, + V2M-Juno) was introduced as a vehicle for evaluating big.LITTLE on + AArch64 CPU cores. It has 2 Cortex A57 CPU cores and 4 Cortex A53 + cores in a big.LITTLE configuration. It also features the MALI T624 + GPU. See ARM document 100113_0000_07_en. + items: + - const: arm,juno + - const: arm,vexpress + - description: Arm Versatile Express Juno r1 Development Platform + (V2M-Juno r1) was introduced mainly aimed at development of PCIe + based systems. Juno r1 also has support for AXI masters placed on + the TLX connectors to join the coherency domain. Otherwise it is the + same configuration as Juno r0. See ARM document 100122_0100_06_en. + items: + - const: arm,juno-r1 + - const: arm,juno + - const: arm,vexpress + - description: Arm Versatile Express Juno r2 Development Platform + (V2M-Juno r2). It has the same feature set as Juno r0 and r1. See + ARM document 100114_0200_04_en. + items: + - const: arm,juno-r2 + - const: arm,juno + - const: arm,vexpress + - description: Arm AEMv8a Versatile Express Real-Time System Model + (VE RTSM) is a programmers view of the Versatile Express with Arm + v8A hardware. See ARM DUI 0575D. + items: + - const: arm,rtsm_ve,aemv8a + - const: arm,vexpress + - description: Arm FVP (Fixed Virtual Platform) base model revision C + See ARM Document 100964_1190_00_en. + items: + - const: arm,fvp-base-revc + - const: arm,vexpress + - description: Arm Foundation model for Aarch64 + items: + - const: arm,foundation-aarch64 + - const: arm,vexpress + + arm,hbi: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: This indicates the ARM HBI (Hardware Board ID), this is + ARM's unique board model ID, visible on the PCB's silkscreen. + + arm,vexpress,site: + description: As Versatile Express can be configured in number of physically + different setups, the device tree should describe platform topology. + For this reason the root node and main motherboard node must define this + property, describing the physical location of the children nodes. + 0 means motherboard site, while 1 and 2 are daughterboard sites, and + 0xf means "sisterboard" which is the site containing the main CPU tile. + allOf: + - $ref: '/schemas/types.yaml#/definitions/uint32' + - minimum: 0 + maximum: 15 + + arm,vexpress,position: + description: When daughterboards are stacked on one site, their position + in the stack be be described this attribute. + allOf: + - $ref: '/schemas/types.yaml#/definitions/uint32' + - minimum: 0 + maximum: 3 + + arm,vexpress,dcc: + description: When describing tiles consisting of more than one DCC, its + number can be specified with this attribute. + allOf: + - $ref: '/schemas/types.yaml#/definitions/uint32' + - minimum: 0 + maximum: 3 + +patternProperties: + "^bus@[0-9a-f]+$": + description: Static Memory Bus (SMB) node, if this exists it describes + the connection between the motherboard and any tiles. Sometimes the + compatible is placed directly under this node, sometimes it is placed + in a subnode named "motherboard". Sometimes the compatible includes + "arm,vexpress,v2?-p1" sometimes (on software models) is is just + "simple-bus". If the compatible is placed in the "motherboard" node, + it is stricter and always has two compatibles. + type: object + allOf: + - $ref: '/schemas/simple-bus.yaml' + + properties: + compatible: + oneOf: + - items: + - enum: + - arm,vexpress,v2m-p1 + - arm,vexpress,v2p-p1 + - const: simple-bus + - const: simple-bus + motherboard: + type: object + description: The motherboard description provides a single "motherboard" + node using 2 address cells corresponding to the Static Memory Bus + used between the motherboard and the tile. The first cell defines the + Chip Select (CS) line number, the second cell address offset within + the CS. All interrupt lines between the motherboard and the tile + are active high and are described using single cell. + properties: + "#address-cells": + const: 2 + "#size-cells": + const: 1 + compatible: + items: + - enum: + - arm,vexpress,v2m-p1 + - arm,vexpress,v2p-p1 + - const: simple-bus + arm,v2m-memory-map: + description: This describes the memory map type. + allOf: + - $ref: '/schemas/types.yaml#/definitions/string' + - enum: + - rs1 + - rs2 + required: + - compatible + required: + - compatible + +allOf: + - if: + properties: + compatible: + contains: + enum: + - arm,vexpress,v2p-ca9 + - arm,vexpress,v2p-ca5s + - arm,vexpress,v2p-ca15 + - arm,vexpress,v2p-ca15_a7 + - arm,vexpress,v2f-1xv7,ca53x2 + then: + required: + - arm,hbi + +... diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards deleted file mode 100644 index 96b1dad58253..000000000000 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ /dev/null @@ -1,237 +0,0 @@ -ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform) ------------------------------------------------------------------------------ -ARM's oldest Linux-supported platform with connectors for different core -tiles of ARMv4, ARMv5 and ARMv6 type. - -Required properties (in root node): - compatible = "arm,integrator-ap"; /* Application Platform */ - compatible = "arm,integrator-cp"; /* Compact Platform */ - -FPGA type interrupt controllers, see the versatile-fpga-irq binding doc. - -Required nodes: - -- core-module: the root node to the Integrator platforms must have - a core-module with regs and the compatible string - "arm,core-module-integrator" -- external-bus-interface: the root node to the Integrator platforms - must have an external bus interface with regs and the - compatible-string "arm,external-bus-interface" - - Required properties for the core module: - - regs: the location and size of the core module registers, one - range of 0x200 bytes. - -- syscon: the root node of the Integrator platforms must have a - system controller node pointing to the control registers, - with the compatible string - "arm,integrator-ap-syscon" - "arm,integrator-cp-syscon" - respectively. - - Required properties for the system controller: - - regs: the location and size of the system controller registers, - one range of 0x100 bytes. - - Required properties for the AP system controller: - - interrupts: the AP syscon node must include the logical module - interrupts, stated in order of module instance <module 0>, - <module 1>, <module 2> ... for the CP system controller this - is not required not of any use. - -/dts-v1/; -/include/ "integrator.dtsi" - -/ { - model = "ARM Integrator/AP"; - compatible = "arm,integrator-ap"; - - core-module@10000000 { - compatible = "arm,core-module-integrator"; - reg = <0x10000000 0x200>; - }; - - ebi@12000000 { - compatible = "arm,external-bus-interface"; - reg = <0x12000000 0x100>; - }; - - syscon { - compatible = "arm,integrator-ap-syscon"; - reg = <0x11000000 0x100>; - interrupt-parent = <&pic>; - /* These are the logic module IRQs */ - interrupts = <9>, <10>, <11>, <12>; - }; -}; - - -ARM Versatile Application and Platform Baseboards -------------------------------------------------- -ARM's development hardware platform with connectors for customizable -core tiles. The hardware configuration of the Versatile boards is -highly customizable. - -Required properties (in root node): - compatible = "arm,versatile-ab"; /* Application baseboard */ - compatible = "arm,versatile-pb"; /* Platform baseboard */ - -Interrupt controllers: -- VIC required properties: - compatible = "arm,versatile-vic"; - interrupt-controller; - #interrupt-cells = <1>; - -- SIC required properties: - compatible = "arm,versatile-sic"; - interrupt-controller; - #interrupt-cells = <1>; - -Required nodes: - -- core-module: the root node to the Versatile platforms must have - a core-module with regs and the compatible strings - "arm,core-module-versatile", "syscon" - -Optional nodes: - -- arm,versatile-ib2-syscon : if the Versatile has an IB2 interface - board mounted, this has a separate system controller that is - defined in this node. - Required properties: - compatible = "arm,versatile-ib2-syscon", "syscon" - -ARM RealView Boards -------------------- -The RealView boards cover tailored evaluation boards that are used to explore -the ARM11 and Cortex A-8 and Cortex A-9 processors. - -Required properties (in root node): - /* RealView Emulation Baseboard */ - compatible = "arm,realview-eb"; - /* RealView Platform Baseboard for ARM1176JZF-S */ - compatible = "arm,realview-pb1176"; - /* RealView Platform Baseboard for ARM11 MPCore */ - compatible = "arm,realview-pb11mp"; - /* RealView Platform Baseboard for Cortex A-8 */ - compatible = "arm,realview-pba8"; - /* RealView Platform Baseboard Explore for Cortex A-9 */ - compatible = "arm,realview-pbx"; - -Required nodes: - -- soc: some node of the RealView platforms must be the SoC - node that contain the SoC-specific devices, with the compatible - string set to one of these tuples: - "arm,realview-eb-soc", "simple-bus" - "arm,realview-pb1176-soc", "simple-bus" - "arm,realview-pb11mp-soc", "simple-bus" - "arm,realview-pba8-soc", "simple-bus" - "arm,realview-pbx-soc", "simple-bus" - -- syscon: some subnode of the RealView SoC node must be a - system controller node pointing to the control registers, - with the compatible string set to one of these: - "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon" - "arm,realview-eb11mp-revc-syscon", "arm,realview-eb-syscon", "syscon" - "arm,realview-eb-syscon", "syscon" - "arm,realview-pb1176-syscon", "syscon" - "arm,realview-pb11mp-syscon", "syscon" - "arm,realview-pba8-syscon", "syscon" - "arm,realview-pbx-syscon", "syscon" - - Required properties for the system controller: - - regs: the location and size of the system controller registers, - one range of 0x1000 bytes. - -Example: - -/dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "ARM RealView PB1176 with device tree"; - compatible = "arm,realview-pb1176"; - #address-cells = <1>; - #size-cells = <1>; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "arm,realview-pb1176-soc", "simple-bus"; - ranges; - - syscon: syscon@10000000 { - compatible = "arm,realview-syscon", "syscon"; - reg = <0x10000000 0x1000>; - }; - - }; -}; - -ARM Versatile Express Boards ------------------------------ -For details on the device tree bindings for ARM Versatile Express boards -please consult the vexpress.txt file in the same directory as this file. - -ARM Juno Boards ----------------- -The Juno boards are targeting development for AArch64 systems. The first -iteration, Juno r0, is a vehicle for evaluating big.LITTLE on AArch64, -with the second iteration, Juno r1, mainly aimed at development of PCIe -based systems. Juno r1 also has support for AXI masters placed on the TLX -connectors to join the coherency domain. - -Juno boards are described in a similar way to ARM Versatile Express boards, -with the motherboard part of the hardware being described in a separate file -to highlight the fact that is part of the support infrastructure for the SoC. -Juno device tree bindings also share the Versatile Express bindings as -described under the RS1 memory mapping. - -Required properties (in root node): - compatible = "arm,juno"; /* For Juno r0 board */ - compatible = "arm,juno-r1"; /* For Juno r1 board */ - compatible = "arm,juno-r2"; /* For Juno r2 board */ - -Required nodes: -The description for the board must include: - - a "psci" node describing the boot method used for the secondary CPUs. - A detailed description of the bindings used for "psci" nodes is present - in the psci.yaml file. - - a "cpus" node describing the available cores and their associated - "enable-method"s. For more details see cpus.yaml file. - -Example: - -/dts-v1/; -/ { - model = "ARM Juno development board (r0)"; - compatible = "arm,juno", "arm,vexpress"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - A57_0: cpu@0 { - compatible = "arm,cortex-a57"; - reg = <0x0 0x0>; - device_type = "cpu"; - enable-method = "psci"; - }; - - ..... - - A53_0: cpu@100 { - compatible = "arm,cortex-a53"; - reg = <0x0 0x100>; - device_type = "cpu"; - enable-method = "psci"; - }; - - ..... - }; - -}; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt deleted file mode 100644 index e3f996920403..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt +++ /dev/null @@ -1,36 +0,0 @@ -Broadcom Kona Family CPU Enable Method --------------------------------------- -This binding defines the enable method used for starting secondary -CPUs in the following Broadcom SoCs: - BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664 - -The enable method is specified by defining the following required -properties in the "cpu" device tree node: - - enable-method = "brcm,bcm11351-cpu-method"; - - secondary-boot-reg = <...>; - -The secondary-boot-reg property is a u32 value that specifies the -physical address of the register used to request the ROM holding pen -code release a secondary CPU. The value written to the register is -formed by encoding the target CPU id into the low bits of the -physical start address it should jump to. - -Example: - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - enable-method = "brcm,bcm11351-cpu-method"; - secondary-boot-reg = <0x3500417c>; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt deleted file mode 100644 index 0ff6560e6094..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt +++ /dev/null @@ -1,10 +0,0 @@ -Broadcom BCM11351 device tree bindings -------------------------------------------- - -Boards with the bcm281xx SoC family (which includes bcm11130, bcm11140, -bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties: - -Required root node property: - -compatible = "brcm,bcm11351"; -DEPRECATED: compatible = "bcm,bcm11351"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml new file mode 100644 index 000000000000..b5ef2666e6b2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm11351.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM11351 device tree bindings + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm28155-ap + - const: brcm,bcm11351 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt deleted file mode 100644 index e0774255e1a6..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt +++ /dev/null @@ -1,15 +0,0 @@ -Broadcom BCM21664 device tree bindings --------------------------------------- - -This document describes the device tree bindings for boards with the BCM21664 -SoC. - -Required root node property: - - compatible: brcm,bcm21664 - -Example: - / { - model = "BCM21664 SoC"; - compatible = "brcm,bcm21664"; - [...] - } diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml new file mode 100644 index 000000000000..aafbd6a27708 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm21664.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM21664 device tree bindings + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm21664-garnet + - const: brcm,bcm21664 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt deleted file mode 100644 index a3af54c0e404..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt +++ /dev/null @@ -1,36 +0,0 @@ -Broadcom Kona Family CPU Enable Method --------------------------------------- -This binding defines the enable method used for starting secondary -CPUs in the following Broadcom SoCs: - BCM23550 - -The enable method is specified by defining the following required -properties in the "cpu" device tree node: - - enable-method = "brcm,bcm23550"; - - secondary-boot-reg = <...>; - -The secondary-boot-reg property is a u32 value that specifies the -physical address of the register used to request the ROM holding pen -code release a secondary CPU. The value written to the register is -formed by encoding the target CPU id into the low bits of the -physical start address it should jump to. - -Example: - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - enable-method = "brcm,bcm23550"; - secondary-boot-reg = <0x3500417c>; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt deleted file mode 100644 index 080baad923d6..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt +++ /dev/null @@ -1,15 +0,0 @@ -Broadcom BCM23550 device tree bindings --------------------------------------- - -This document describes the device tree bindings for boards with the BCM23550 -SoC. - -Required root node property: - - compatible: brcm,bcm23550 - -Example: - / { - model = "BCM23550 SoC"; - compatible = "brcm,bcm23550"; - [...] - } diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml new file mode 100644 index 000000000000..c4b4efd28a55 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm23550.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM23550 device tree bindings + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm23550-sparrow + - const: brcm,bcm23550 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt deleted file mode 100644 index 8608a776caa7..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt +++ /dev/null @@ -1,15 +0,0 @@ -Broadcom BCM4708 device tree bindings -------------------------------------------- - -Boards with the BCM4708 SoC shall have the following properties: - -Required root node property: - -bcm4708 -compatible = "brcm,bcm4708"; - -bcm4709 -compatible = "brcm,bcm4709"; - -bcm53012 -compatible = "brcm,bcm53012"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml new file mode 100644 index 000000000000..d48313c7ae45 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4708.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4708 device tree bindings + +description: + Broadcom BCM4708/47081/4709/47094/53012 Wi-Fi/network SoCs based + on the iProc architecture (Northstar). + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + - Hauke Mehrtens <hauke@hauke-m.de> + - Rafal Milecki <zajec5@gmail.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM4708 based boards + items: + - enum: + - asus,rt-ac56u + - asus,rt-ac68u + - buffalo,wzr-1750dhp + - linksys,ea6300-v1 + - linksys,ea6500-v2 + - luxul,xap-1510v1 + - luxul,xwc-1000 + - netgear,r6250v1 + - netgear,r6300v2 + - smartrg,sr400ac + - brcm,bcm94708 + - const: brcm,bcm4708 + + - description: BCM47081 based boards + items: + - enum: + - asus,rt-n18u + - buffalo,wzr-600dhp2 + - buffalo,wzr-900dhp + - luxul,xap-1410v1 + - luxul,xwr-1200v1 + - tplink,archer-c5-v2 + - const: brcm,bcm47081 + - const: brcm,bcm4708 + + - description: BCM4709 based boards + items: + - enum: + - asus,rt-ac87u + - buffalo,wxr-1900dhp + - linksys,ea9200 + - netgear,r7000 + - netgear,r8000 + - tplink,archer-c9-v1 + - brcm,bcm94709 + - const: brcm,bcm4709 + - const: brcm,bcm4708 + + - description: BCM47094 based boards + items: + - enum: + - dlink,dir-885l + - linksys,panamera + - luxul,abr-4500-v1 + - luxul,xap-1610-v1 + - luxul,xbr-4500-v1 + - luxul,xwc-2000-v1 + - luxul,xwr-3100v1 + - luxul,xwr-3150-v1 + - netgear,r8500 + - phicomm,k3 + - const: brcm,bcm47094 + - const: brcm,bcm4708 + + - description: BCM53012 based boards + items: + - enum: + - brcm,bcm953012er + - brcm,bcm953012hr + - brcm,bcm953012k + - const: brcm,brcm53012 + - const: brcm,bcm4708 +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt deleted file mode 100644 index 4c77169bb534..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt +++ /dev/null @@ -1,31 +0,0 @@ -Broadcom Cygnus device tree bindings ------------------------------------- - - -Boards with Cygnus SoCs shall have the following properties: - -Required root node property: - -BCM11300 -compatible = "brcm,bcm11300", "brcm,cygnus"; - -BCM11320 -compatible = "brcm,bcm11320", "brcm,cygnus"; - -BCM11350 -compatible = "brcm,bcm11350", "brcm,cygnus"; - -BCM11360 -compatible = "brcm,bcm11360", "brcm,cygnus"; - -BCM58300 -compatible = "brcm,bcm58300", "brcm,cygnus"; - -BCM58302 -compatible = "brcm,bcm58302", "brcm,cygnus"; - -BCM58303 -compatible = "brcm,bcm58303", "brcm,cygnus"; - -BCM58305 -compatible = "brcm,bcm58305", "brcm,cygnus"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml new file mode 100644 index 000000000000..fe111e72dac3 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,cygnus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Cygnus device tree bindings + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm11300 + - brcm,bcm11320 + - brcm,bcm11350 + - brcm,bcm11360 + - brcm,bcm58300 + - brcm,bcm58302 + - brcm,bcm58303 + - brcm,bcm58305 + - const: brcm,cygnus + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt deleted file mode 100644 index a124c7fc4dcd..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt +++ /dev/null @@ -1,14 +0,0 @@ -Broadcom Hurricane 2 device tree bindings ---------------------------------------- - -Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs -are based on Broadcom's iProc SoC architecture and feature a single core Cortex -A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND -flash and a PCIe attached integrated switching engine. - -Boards with Hurricane SoCs shall have the following properties: - -Required root node property: - -BCM53342 -compatible = "brcm,bcm53342", "brcm,hr2"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml new file mode 100644 index 000000000000..1158f49b0b83 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,hr2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Hurricane 2 device tree bindings + +description: + Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs + are based on Broadcom's iProc SoC architecture and feature a single core Cortex + A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND + flash and a PCIe attached integrated switching engine. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - ubnt,unifi-switch8 + - const: brcm,bcm53342 + - const: brcm,hr2 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt deleted file mode 100644 index 35f056f4a1c3..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt +++ /dev/null @@ -1,9 +0,0 @@ -Broadcom North Star 2 (NS2) device tree bindings ------------------------------------------------- - -Boards with NS2 shall have the following properties: - -Required root node property: - -NS2 SVK board -compatible = "brcm,ns2-svk", "brcm,ns2"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml new file mode 100644 index 000000000000..2451704f87f0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,ns2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom North Star 2 (NS2) device tree bindings + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,ns2-svk + - brcm,ns2-xmc + - const: brcm,ns2 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt deleted file mode 100644 index 677ef9d9f445..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt +++ /dev/null @@ -1,39 +0,0 @@ -Broadcom Northstar Plus SoC CPU Enable Method ---------------------------------------------- -This binding defines the enable method used for starting secondary -CPU in the following Broadcom SoCs: - BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 - -The enable method is specified by defining the following required -properties in the corresponding secondary "cpu" device tree node: - - enable-method = "brcm,bcm-nsp-smp"; - - secondary-boot-reg = <...>; - -The secondary-boot-reg property is a u32 value that specifies the -physical address of the register which should hold the common -entry point for a secondary CPU. This entry is cpu node specific -and should be added per cpu. E.g., in case of NSP (BCM58625) which -is a dual core CPU SoC, this entry should be added to cpu1 node. - - -Example: - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; - reg = <0>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; - enable-method = "brcm,bcm-nsp-smp"; - secondary-boot-reg = <0xffff042c>; - reg = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt deleted file mode 100644 index eae53e4556be..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt +++ /dev/null @@ -1,34 +0,0 @@ -Broadcom Northstar Plus device tree bindings --------------------------------------------- - -Broadcom Northstar Plus family of SoCs are used for switching control -and management applications as well as residential router/gateway -applications. The SoC features dual core Cortex A9 ARM CPUs, integrating -several peripheral interfaces including multiple Gigabit Ethernet PHYs, -DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash, -SATA and several other IO controllers. - -Boards with Northstar Plus SoCs shall have the following properties: - -Required root node property: - -BCM58522 -compatible = "brcm,bcm58522", "brcm,nsp"; - -BCM58525 -compatible = "brcm,bcm58525", "brcm,nsp"; - -BCM58535 -compatible = "brcm,bcm58535", "brcm,nsp"; - -BCM58622 -compatible = "brcm,bcm58622", "brcm,nsp"; - -BCM58623 -compatible = "brcm,bcm58623", "brcm,nsp"; - -BCM58625 -compatible = "brcm,bcm58625", "brcm,nsp"; - -BCM88312 -compatible = "brcm,bcm88312", "brcm,nsp"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml new file mode 100644 index 000000000000..fe364cebf57f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,nsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar Plus device tree bindings + +description: + Broadcom Northstar Plus family of SoCs are used for switching control + and management applications as well as residential router/gateway + applications. The SoC features dual core Cortex A9 ARM CPUs, integrating + several peripheral interfaces including multiple Gigabit Ethernet PHYs, + DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash, + SATA and several other IO controllers. + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm58522 + - brcm,bcm58525 + - brcm,bcm58535 + - brcm,bcm58622 + - brcm,bcm58623 + - brcm,bcm58625 + - brcm,bcm88312 + - const: brcm,nsp + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt deleted file mode 100644 index 23a02178dd44..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt +++ /dev/null @@ -1,12 +0,0 @@ -Broadcom Stingray device tree bindings ------------------------------------------------- - -Boards with Stingray shall have the following properties: - -Required root node property: - -Stingray Combo SVK board -compatible = "brcm,bcm958742k", "brcm,stingray"; - -Stingray SST100 board -compatible = "brcm,bcm958742t", "brcm,stingray"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml new file mode 100644 index 000000000000..4ad2b2124ab4 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,stingray.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Stingray device tree bindings + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm958742k + - brcm,bcm958742t + - brcm,bcm958802a802x + - const: brcm,stingray + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt deleted file mode 100644 index 223ed3471c08..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt +++ /dev/null @@ -1,10 +0,0 @@ -Broadcom Vulcan device tree bindings ------------------------------------- - -Boards with Broadcom Vulcan shall have the following root property: - -Broadcom Vulcan Evaluation Board: - compatible = "brcm,vulcan-eval", "brcm,vulcan-soc"; - -Generic Vulcan board: - compatible = "brcm,vulcan-soc"; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml new file mode 100644 index 000000000000..c5b6f31c20b9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,vulcan-soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Vulcan device tree bindings + +maintainers: + - Robert Richter <rrichter@marvell.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,vulcan-eval + - cavium,thunderx2-cn9900 + - const: brcm,vulcan-soc + +... diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 7a9c3ce2dbef..644dfc5f0731 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -287,6 +287,39 @@ properties: While optional, it is the preferred way to get access to the cpu-core power-domains. + secondary-boot-reg: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: | + Required for systems that have an "enable-method" property value of + "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp". + + This includes the following SoCs: | + BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550 + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 + + The secondary-boot-reg property is a u32 value that specifies the + physical address of the register used to request the ROM holding pen + code release a secondary CPU. The value written to the register is + formed by encoding the target CPU id into the low bits of the + physical start address it should jump to. + +if: + # If the enable-method property contains one of those values + properties: + enable-method: + contains: + enum: + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm-nsp-smp + # and if enable-method is present + required: + - enable-method + +then: + required: + - secondary-boot-reg + required: - device_type - reg diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index a8e0b4a813ed..bf9461d6d028 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -119,6 +119,10 @@ properties: - fsl,imx6q-sabreauto - fsl,imx6q-sabrelite - fsl,imx6q-sabresd + - technexion,imx6q-pico-dwarf # TechNexion i.MX6Q Pico-Dwarf + - technexion,imx6q-pico-hobbit # TechNexion i.MX6Q Pico-Hobbit + - technexion,imx6q-pico-nymph # TechNexion i.MX6Q Pico-Nymph + - technexion,imx6q-pico-pi # TechNexion i.MX6Q Pico-Pi - technologic,imx6q-ts4900 - technologic,imx6q-ts7970 - toradex,apalis_imx6q # Apalis iMX6 Module @@ -166,6 +170,10 @@ properties: - emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base - fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board + - technexion,imx6dl-pico-dwarf # TechNexion i.MX6DL Pico-Dwarf + - technexion,imx6dl-pico-hobbit # TechNexion i.MX6DL Pico-Hobbit + - technexion,imx6dl-pico-nymph # TechNexion i.MX6DL Pico-Nymph + - technexion,imx6dl-pico-pi # TechNexion i.MX6DL Pico-Pi - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 - toradex,colibri_imx6dl # Colibri iMX6 Module @@ -225,6 +233,9 @@ properties: - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board - kontron,imx6ul-n6310-som # Kontron N6310 SOM - kontron,imx6ul-n6311-som # Kontron N6311 SOM + - technexion,imx6ul-pico-dwarf # TechNexion i.MX6UL Pico-Dwarf + - technexion,imx6ul-pico-hobbit # TechNexion i.MX6UL Pico-Hobbit + - technexion,imx6ul-pico-pi # TechNexion i.MX6UL Pico-Pi - const: fsl,imx6ul - description: Kontron N6310 S Board @@ -274,6 +285,7 @@ properties: items: - enum: - toradex,colibri-imx7s # Colibri iMX7 Solo Module + - toradex,colibri-imx7s-aster # Colibri iMX7 Solo Module on Aster Carrier Board - toradex,colibri-imx7s-eval-v3 # Colibri iMX7 Solo Module on Colibri Evaluation Board V3 - tq,imx7s-mba7 # i.MX7S TQ MBa7 with TQMa7S SoM - const: fsl,imx7s @@ -284,8 +296,14 @@ properties: - fsl,imx7d-sdb # i.MX7 SabreSD Board - fsl,imx7d-sdb-reva # i.MX7 SabreSD Rev-A Board - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board + - technexion,imx7d-pico-dwarf # TechNexion i.MX7D Pico-Dwarf + - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit + - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph + - technexion,imx7d-pico-pi # TechNexion i.MX7D Pico-Pi - toradex,colibri-imx7d # Colibri iMX7 Dual Module + - toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board - toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module + - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3 - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on Colibri Evaluation Board V3 - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM @@ -324,6 +342,12 @@ properties: - fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board - const: fsl,imx8mn + - description: i.MX8MP based Boards + items: + - enum: + - fsl,imx8mp-evk # i.MX8MP EVK Board + - const: fsl,imx8mp + - description: i.MX8MQ based Boards items: - enum: @@ -395,6 +419,51 @@ properties: - fsl,ls1021a-twr - const: fsl,ls1021a + - description: LS1028A based Boards + items: + - enum: + - fsl,ls1028a-qds + - fsl,ls1028a-rdb + - const: fsl,ls1028a + + - description: Kontron KBox A-230-LS + items: + - const: kontron,kbox-a-230-ls + - const: kontron,sl28-var4 + - const: kontron,sl28 + - const: fsl,ls1028a + - description: + Kontron SMARC-sAL28 board on the SMARC Eval Carrier 2.0 + items: + - enum: + - kontron,sl28-var2-ads2 + - kontron,sl28-var3-ads2 + - kontron,sl28-var4-ads2 + - enum: + - kontron,sl28-var2 + - kontron,sl28-var3 + - kontron,sl28-var4 + - const: kontron,sl28 + - const: fsl,ls1028a + + - description: + Kontron SMARC-sAL28 board (on a generic/undefined carrier) + items: + - enum: + - kontron,sl28-var2 + - kontron,sl28-var3 + - kontron,sl28-var4 + - const: kontron,sl28 + - const: fsl,ls1028a + + - description: + Kontron SMARC-sAL28 board (base). This is used in the base device + tree which is compatible with the overlays provided by the + vendor. + items: + - const: kontron,sl28 + - const: fsl,ls1028a + - description: LS1043A based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index 9436124c5809..611094d9186b 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -208,6 +208,7 @@ properties: - description: R-Car M3-W+ (R8A77961) items: - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP8J77961ASKB0SK0SA05A (M3 ES3.0)) - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012SA5A) - const: renesas,r8a77961 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 874b0eaa2a75..715586dea9bb 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -402,6 +402,11 @@ properties: - const: phytec,rk3288-phycore-som - const: rockchip,rk3288 + - description: Pine64 PinebookPro + items: + - const: pine64,pinebook-pro + - const: rockchip,rk3399 + - description: Pine64 Rock64 items: - const: pine64,rock64 @@ -443,7 +448,7 @@ properties: - description: Rockchip Kylin items: - - const: rockchip,kylin-rk3036 + - const: rockchip,rk3036-kylin - const: rockchip,rk3036 - description: Rockchip PX3 Evaluation board @@ -468,6 +473,11 @@ properties: - const: rockchip,r88 - const: rockchip,rk3368 + - description: Rockchip RK3036 Evaluation board + items: + - const: rockchip,rk3036-evb + - const: rockchip,rk3036 + - description: Rockchip RK3228 Evaluation board items: - const: rockchip,rk3228-evb diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 327ce6730823..abf2d97fb7ae 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -394,6 +394,12 @@ properties: - const: linksprite,pcduino3-nano - const: allwinner,sun7i-a20 + - description: Linutronix Testbox v2 + items: + - const: linutronix,testbox-v2 + - const: lamobo,lamobo-r1 + - const: allwinner,sun7i-a20 + - description: HAOYU Electronics Marsboard A10 items: - const: haoyu,a10-marsboard @@ -636,6 +642,21 @@ properties: - const: pine64,pinebook - const: allwinner,sun50i-a64 + - description: Pine64 PinePhone Developer Batch (1.0) + items: + - const: pine64,pinephone-1.0 + - const: allwinner,sun50i-a64 + + - description: Pine64 PinePhone Braveheart (1.1) + items: + - const: pine64,pinephone-1.1 + - const: allwinner,sun50i-a64 + + - description: Pine64 PineTab + items: + - const: pine64,pinetab + - const: allwinner,sun50i-a64 + - description: Pine64 SoPine Baseboard items: - const: pine64,sopine-baseboard @@ -647,6 +668,11 @@ properties: - const: pineriver,mini-xplus - const: allwinner,sun4i-a10 + - description: PocketBook Touch Lux 3 + items: + - const: pocketbook,touch-lux-3 + - const: allwinner,sun5i-a13 + - description: Point of View Protab2-IPS9 items: - const: pov,protab2-ips9 diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml index 9370e64992dd..aa0738b4d534 100644 --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml @@ -30,6 +30,7 @@ properties: enum: - allwinner,sun5i-a13-mbus - allwinner,sun8i-h3-mbus + - allwinner,sun50i-a64-mbus reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt deleted file mode 100644 index cb12f33a247f..000000000000 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ /dev/null @@ -1,300 +0,0 @@ -NVIDIA Tegra Power Management Controller (PMC) - -== Power Management Controller Node == - -The PMC block interacts with an external Power Management Unit. The PMC -mostly controls the entry and exit of the system from different sleep -modes. It provides power-gating controllers for SoC and CPU power-islands. - -Required properties: -- name : Should be pmc -- compatible : Should contain one of the following: - For Tegra20 must contain "nvidia,tegra20-pmc". - For Tegra30 must contain "nvidia,tegra30-pmc". - For Tegra114 must contain "nvidia,tegra114-pmc" - For Tegra124 must contain "nvidia,tegra124-pmc" - For Tegra132 must contain "nvidia,tegra124-pmc" - For Tegra210 must contain "nvidia,tegra210-pmc" -- reg : Offset and length of the register set for the device -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - "pclk" (The Tegra clock of that name), - "clk32k_in" (The 32KHz clock input to Tegra). - -Optional properties: -- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal. - The PMU is an external Power Management Unit, whose interrupt output - signal is fed into the PMC. This signal is optionally inverted, and then - fed into the ARM GIC. The PMC is not involved in the detection or - handling of this interrupt signal, merely its inversion. -- nvidia,suspend-mode : The suspend mode that the platform should use. - Valid values are 0, 1 and 2: - 0 (LP0): CPU + Core voltage off and DRAM in self-refresh - 1 (LP1): CPU voltage off and DRAM in self-refresh - 2 (LP2): CPU voltage off -- nvidia,core-power-req-active-high : Boolean, core power request active-high -- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high -- nvidia,combined-power-req : Boolean, combined power request for CPU & Core -- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC) - is enabled. - -Required properties when nvidia,suspend-mode is specified: -- nvidia,cpu-pwr-good-time : CPU power good time in uS. -- nvidia,cpu-pwr-off-time : CPU power off time in uS. -- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time> - Core power good time in uS. -- nvidia,core-pwr-off-time : Core power off time in uS. - -Required properties when nvidia,suspend-mode=<0>: -- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector - The LP0 vector contains the warm boot code that is executed by AVP when - resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7 - processor and always being the first boot processor when chip is power on - or resume from deep sleep mode. When the system is resumed from the deep - sleep mode, the warm boot code will restore some PLLs, clocks and then - bring up CPU0 for resuming the system. - -Hardware-triggered thermal reset: -On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists, -hardware-triggered thermal reset will be enabled. - -Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'): -- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are - described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the - Tegra K1 Technical Reference Manual. -- nvidia,bus-addr : Bus address of the PMU on the I2C bus -- nvidia,reg-addr : I2C register address to write poweroff command to -- nvidia,reg-data : Poweroff command to write to PMU - -Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'): -- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command. - Defaults to 0. Valid values are described in section 12.5.2 - "Pinmux Support" of the Tegra4 Technical Reference Manual. - -Optional nodes: -- powergates : This node contains a hierarchy of power domain nodes, which - should match the powergates on the Tegra SoC. See "Powergate - Nodes" below. - -Example: - -/ SoC dts including file -pmc@7000f400 { - compatible = "nvidia,tegra20-pmc"; - reg = <0x7000e400 0x400>; - clocks = <&tegra_car 110>, <&clk32k_in>; - clock-names = "pclk", "clk32k_in"; - nvidia,invert-interrupt; - nvidia,suspend-mode = <1>; - nvidia,cpu-pwr-good-time = <2000>; - nvidia,cpu-pwr-off-time = <100>; - nvidia,core-pwr-good-time = <3845 3845>; - nvidia,core-pwr-off-time = <458>; - nvidia,core-power-req-active-high; - nvidia,sys-clock-req-active-high; - nvidia,lp0-vec = <0xbdffd000 0x2000>; -}; - -/ Tegra board dts file -{ - ... - pmc@7000f400 { - i2c-thermtrip { - nvidia,i2c-controller-id = <4>; - nvidia,bus-addr = <0x40>; - nvidia,reg-addr = <0x36>; - nvidia,reg-data = <0x2>; - }; - }; - ... - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - ... -}; - - -== Powergate Nodes == - -Each of the powergate nodes represents a power-domain on the Tegra SoC -that can be power-gated by the Tegra PMC. The name of the powergate node -should be one of the below. Note that not every powergate is applicable -to all Tegra devices and the following list shows which powergates are -applicable to which devices. Please refer to the Tegra TRM for more -details on the various powergates. - - Name Description Devices Applicable - 3d 3D Graphics Tegra20/114/124/210 - 3d0 3D Graphics 0 Tegra30 - 3d1 3D Graphics 1 Tegra30 - aud Audio Tegra210 - dfd Debug Tegra210 - dis Display A Tegra114/124/210 - disb Display B Tegra114/124/210 - heg 2D Graphics Tegra30/114/124/210 - iram Internal RAM Tegra124/210 - mpe MPEG Encode All - nvdec NVIDIA Video Decode Engine Tegra210 - nvjpg NVIDIA JPEG Engine Tegra210 - pcie PCIE Tegra20/30/124/210 - sata SATA Tegra30/124/210 - sor Display interfaces Tegra124/210 - ve2 Video Encode Engine 2 Tegra210 - venc Video Encode Engine All - vdec Video Decode Engine Tegra20/30/114/124 - vic Video Imaging Compositor Tegra124/210 - xusba USB Partition A Tegra114/124/210 - xusbb USB Partition B Tegra114/124/210 - xusbc USB Partition C Tegra114/124/210 - -Required properties: - - clocks: Must contain an entry for each clock required by the PMC for - controlling a power-gate. See ../clocks/clock-bindings.txt for details. - - resets: Must contain an entry for each reset required by the PMC for - controlling a power-gate. See ../reset/reset.txt for details. - - #power-domain-cells: Must be 0. - -Example: - - pmc: pmc@7000e400 { - compatible = "nvidia,tegra210-pmc"; - reg = <0x0 0x7000e400 0x0 0x400>; - clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; - clock-names = "pclk", "clk32k_in"; - - powergates { - pd_audio: aud { - clocks = <&tegra_car TEGRA210_CLK_APE>, - <&tegra_car TEGRA210_CLK_APB2APE>; - resets = <&tegra_car 198>; - #power-domain-cells = <0>; - }; - }; - }; - - -== Powergate Clients == - -Hardware blocks belonging to a power domain should contain a "power-domains" -property that is a phandle pointing to the corresponding powergate node. - -Example: - - adma: adma@702e2000 { - ... - power-domains = <&pd_audio>; - ... - }; - -== Pad Control == - -On Tegra SoCs a pad is a set of pins which are configured as a group. -The pin grouping is a fixed attribute of the hardware. The PMC can be -used to set pad power state and signaling voltage. A pad can be either -in active or power down mode. The support for power state and signaling -voltage configuration varies depending on the pad in question. 3.3 V and -1.8 V signaling voltages are supported on pins where software -controllable signaling voltage switching is available. - -The pad configuration state nodes are placed under the pmc node and they -are referred to by the pinctrl client properties. For more information -see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. -The pad name should be used as the value of the pins property in pin -configuration nodes. - -The following pads are present on Tegra124 and Tegra132: -audio bb cam comp -csia csb cse dsi -dsib dsic dsid hdmi -hsic hv lvds mipi-bias -nand pex-bias pex-clk1 pex-clk2 -pex-cntrl sdmmc1 sdmmc3 sdmmc4 -sys_ddc uart usb0 usb1 -usb2 usb_bias - -The following pads are present on Tegra210: -audio audio-hv cam csia -csib csic csid csie -csif dbg debug-nonao dmic -dp dsi dsib dsic -dsid emmc emmc2 gpio -hdmi hsic lvds mipi-bias -pex-bias pex-clk1 pex-clk2 pex-cntrl -sdmmc1 sdmmc3 spi spi-hv -uart usb0 usb1 usb2 -usb3 usb-bias - -Required pin configuration properties: - - pins: Must contain name of the pad(s) to be configured. - -Optional pin configuration properties: - - low-power-enable: Configure the pad into power down mode - - low-power-disable: Configure the pad into active mode - - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 - or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. - The values are defined in - include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. - -Note: The power state can be configured on all of the Tegra124 and - Tegra132 pads. None of the Tegra124 or Tegra132 pads support - signaling voltage switching. - -Note: All of the listed Tegra210 pads except pex-cntrl support power - state configuration. Signaling voltage switching is supported on - following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio, - pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart. - -Pad configuration state example: - pmc: pmc@7000e400 { - compatible = "nvidia,tegra210-pmc"; - reg = <0x0 0x7000e400 0x0 0x400>; - clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; - clock-names = "pclk", "clk32k_in"; - - ... - - sdmmc1_3v3: sdmmc1-3v3 { - pins = "sdmmc1"; - power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; - }; - - sdmmc1_1v8: sdmmc1-1v8 { - pins = "sdmmc1"; - power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; - }; - - hdmi_off: hdmi-off { - pins = "hdmi"; - low-power-enable; - } - - hdmi_on: hdmi-on { - pins = "hdmi"; - low-power-disable; - } - }; - -Pinctrl client example: - sdmmc1: sdhci@700b0000 { - ... - pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; - pinctrl-0 = <&sdmmc1_3v3>; - pinctrl-1 = <&sdmmc1_1v8>; - }; - ... - sor@54540000 { - ... - pinctrl-0 = <&hdmi_off>; - pinctrl-1 = <&hdmi_on>; - pinctrl-names = "hdmi-on", "hdmi-off"; - }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml new file mode 100644 index 000000000000..f17bb353f65e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -0,0 +1,354 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra Power Management Controller (PMC) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jonathan Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra20-pmc + - nvidia,tegra20-pmc + - nvidia,tegra30-pmc + - nvidia,tegra114-pmc + - nvidia,tegra124-pmc + - nvidia,tegra210-pmc + + reg: + maxItems: 1 + description: + Offset and length of the register set for the device. + + clock-names: + items: + - const: pclk + - const: clk32k_in + description: + Must includes entries pclk and clk32k_in. + pclk is the Tegra clock of that name and clk32k_in is 32KHz clock + input to Tegra. + + clocks: + maxItems: 2 + description: + Must contain an entry for each entry in clock-names. + See ../clocks/clocks-bindings.txt for details. + + '#clock-cells': + const: 1 + description: + Tegra PMC has clk_out_1, clk_out_2, and clk_out_3. + PMC also has blink control which allows 32Khz clock output to + Tegra blink pad. + Consumer of PMC clock should specify the desired clock by having + the clock ID in its "clocks" phandle cell with pmc clock provider. + See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC + clock IDs. + + '#interrupt-cells': + const: 2 + description: + Specifies number of cells needed to encode an interrupt source. + The value must be 2. + + interrupt-controller: true + + nvidia,invert-interrupt: + $ref: /schemas/types.yaml#/definitions/flag + description: Inverts the PMU interrupt signal. + The PMU is an external Power Management Unit, whose interrupt output + signal is fed into the PMC. This signal is optionally inverted, and + then fed into the ARM GIC. The PMC is not involved in the detection + or handling of this interrupt signal, merely its inversion. + + nvidia,core-power-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: Core power request active-high. + + nvidia,sys-clock-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: System clock request active-high. + + nvidia,combined-power-req: + $ref: /schemas/types.yaml#/definitions/flag + description: combined power request for CPU and Core. + + nvidia,cpu-pwr-good-en: + $ref: /schemas/types.yaml#/definitions/flag + description: + CPU power good signal from external PMIC to PMC is enabled. + + nvidia,suspend-mode: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 2] + description: + The suspend mode that the platform should use. + Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh + Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh + Mode 2 is for LP2, CPU voltage off + + nvidia,cpu-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power good time in uSec. + + nvidia,cpu-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power off time in uSec. + + nvidia,core-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + <Oscillator-stable-time Power-stable-time> + Core power good time in uSec. + + nvidia,core-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Core power off time in uSec. + + nvidia,lp0-vec: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + <start length> Starting address and length of LP0 vector. + The LP0 vector contains the warm boot code that is executed + by AVP when resuming from the LP0 state. + The AVP (Audio-Video Processor) is an ARM7 processor and + always being the first boot processor when chip is power on + or resume from deep sleep mode. When the system is resumed + from the deep sleep mode, the warm boot code will restore + some PLLs, clocks and then brings up CPU0 for resuming the + system. + + i2c-thermtrip: + type: object + description: + On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists, + hardware-triggered thermal reset will be enabled. + + properties: + nvidia,i2c-controller-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + ID of I2C controller to send poweroff command to PMU. + Valid values are described in section 9.2.148 + "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference + Manual. + + nvidia,bus-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Bus address of the PMU on the I2C bus. + + nvidia,reg-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: PMU I2C register address to issue poweroff command. + + nvidia,reg-data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Poweroff command to write to PMU. + + nvidia,pinmux-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Pinmux used by the hardware when issuing Poweroff command. + Defaults to 0. Valid values are described in section 12.5.2 + "Pinmux Support" of the Tegra4 Technical Reference Manual. + + required: + - nvidia,i2c-controller-id + - nvidia,bus-addr + - nvidia,reg-addr + - nvidia,reg-data + + additionalProperties: false + + powergates: + type: object + description: | + This node contains a hierarchy of power domain nodes, which should + match the powergates on the Tegra SoC. Each powergate node + represents a power-domain on the Tegra SoC that can be power-gated + by the Tegra PMC. + Hardware blocks belonging to a power domain should contain + "power-domains" property that is a phandle pointing to corresponding + powergate node. + The name of the powergate node should be one of the below. Note that + not every powergate is applicable to all Tegra devices and the following + list shows which powergates are applicable to which devices. + Please refer to Tegra TRM for mode details on the powergate nodes to + use for each power-gate block inside Tegra. + Name Description Devices Applicable + 3d 3D Graphics Tegra20/114/124/210 + 3d0 3D Graphics 0 Tegra30 + 3d1 3D Graphics 1 Tegra30 + aud Audio Tegra210 + dfd Debug Tegra210 + dis Display A Tegra114/124/210 + disb Display B Tegra114/124/210 + heg 2D Graphics Tegra30/114/124/210 + iram Internal RAM Tegra124/210 + mpe MPEG Encode All + nvdec NVIDIA Video Decode Engine Tegra210 + nvjpg NVIDIA JPEG Engine Tegra210 + pcie PCIE Tegra20/30/124/210 + sata SATA Tegra30/124/210 + sor Display interfaces Tegra124/210 + ve2 Video Encode Engine 2 Tegra210 + venc Video Encode Engine All + vdec Video Decode Engine Tegra20/30/114/124 + vic Video Imaging Compositor Tegra124/210 + xusba USB Partition A Tegra114/124/210 + xusbb USB Partition B Tegra114/124/210 + xusbc USB Partition C Tegra114/124/210 + + patternProperties: + "^[a-z0-9]+$": + type: object + + patternProperties: + clocks: + minItems: 1 + maxItems: 8 + description: + Must contain an entry for each clock required by the PMC + for controlling a power-gate. + See ../clocks/clock-bindings.txt document for more details. + + resets: + minItems: 1 + maxItems: 8 + description: + Must contain an entry for each reset required by the PMC + for controlling a power-gate. + See ../reset/reset.txt for more details. + + '#power-domain-cells': + const: 0 + description: Must be 0. + + required: + - clocks + - resets + - '#power-domain-cells' + + additionalProperties: false + +patternProperties: + "^[a-f0-9]+-[a-f0-9]+$": + type: object + description: + This is a Pad configuration node. On Tegra SOCs a pad is a set of + pins which are configured as a group. The pin grouping is a fixed + attribute of the hardware. The PMC can be used to set pad power state + and signaling voltage. A pad can be either in active or power down mode. + The support for power state and signaling voltage configuration varies + depending on the pad in question. 3.3V and 1.8V signaling voltages + are supported on pins where software controllable signaling voltage + switching is available. + + The pad configuration state nodes are placed under the pmc node and they + are referred to by the pinctrl client properties. For more information + see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. + The pad name should be used as the value of the pins property in pin + configuration nodes. + + The following pads are present on Tegra124 and Tegra132 + audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic, + hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl, + sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias. + + The following pads are present on Tegra210 + audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg, + debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi, + hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1, + sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias. + + properties: + pins: + $ref: /schemas/types.yaml#/definitions/string + description: Must contain name of the pad(s) to be configured. + + low-power-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into power down mode. + + low-power-disable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into active mode. + + power-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or + TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. + The values are defined in + include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. + Power state can be configured on all Tegra124 and Tegra132 + pads. None of the Tegra124 or Tegra132 pads support signaling + voltage switching. + All of the listed Tegra210 pads except pex-cntrl support power + state configuration. Signaling voltage switching is supported + on below Tegra210 pads. + audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1, + sdmmc3, spi, spi-hv, and uart. + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + - clock-names + - clocks + - '#clock-cells' + +dependencies: + "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] + "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] + "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"] + +examples: + - | + + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> + #include <dt-bindings/soc/tegra-pmc.h> + + tegra_pmc: pmc@7000e400 { + compatible = "nvidia,tegra210-pmc"; + reg = <0x0 0x7000e400 0x0 0x400>; + clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; + + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + powergates { + pd_audio: aud { + clocks = <&tegra_car TEGRA210_CLK_APE>, + <&tegra_car TEGRA210_CLK_APB2APE>; + resets = <&tegra_car 198>; + #power-domain-cells = <0>; + }; + + pd_xusbss: xusba { + clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>; + resets = <&tegra_car TEGRA210_CLK_XUSB_SS>; + #power-domain-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt deleted file mode 100644 index 39844cd0bcce..000000000000 --- a/Documentation/devicetree/bindings/arm/vexpress.txt +++ /dev/null @@ -1,229 +0,0 @@ -ARM Versatile Express boards family ------------------------------------ - -ARM's Versatile Express platform consists of a motherboard and one -or more daughterboards (tiles). The motherboard provides a set of -peripherals. Processor and RAM "live" on the tiles. - -The motherboard and each core tile should be described by a separate -Device Tree source file, with the tile's description including -the motherboard file using a /include/ directive. As the motherboard -can be initialized in one of two different configurations ("memory -maps"), care must be taken to include the correct one. - - -Root node ---------- - -Required properties in the root node: -- compatible value: - compatible = "arm,vexpress,<model>", "arm,vexpress"; - where <model> is the full tile model name (as used in the tile's - Technical Reference Manual), eg.: - - for Coretile Express A5x2 (V2P-CA5s): - compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress"; - - for Coretile Express A9x4 (V2P-CA9): - compatible = "arm,vexpress,v2p-ca9", "arm,vexpress"; - If a tile comes in several variants or can be used in more then one - configuration, the compatible value should be: - compatible = "arm,vexpress,<model>,<variant>", \ - "arm,vexpress,<model>", "arm,vexpress"; - eg: - - Coretile Express A15x2 (V2P-CA15) with Tech Chip 1: - compatible = "arm,vexpress,v2p-ca15,tc1", \ - "arm,vexpress,v2p-ca15", "arm,vexpress"; - - LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM: - compatible = "arm,vexpress,v2f-2xv6,ca7x3", \ - "arm,vexpress,v2f-2xv6", "arm,vexpress"; - -Optional properties in the root node: -- tile model name (use name from the tile's Technical Reference - Manual, eg. "V2P-CA5s") - model = "<model>"; -- tile's HBI number (unique ARM's board model ID, visible on the - PCB's silkscreen) in hexadecimal transcription: - arm,hbi = <0xhbi> - eg: - - for Coretile Express A5x2 (V2P-CA5s) HBI-0191: - arm,hbi = <0x191>; - - Coretile Express A9x4 (V2P-CA9) HBI-0225: - arm,hbi = <0x225>; - - -CPU nodes ---------- - -Top-level standard "cpus" node is required. It must contain a node -with device_type = "cpu" property for every available core, eg.: - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a5"; - reg = <0>; - }; - }; - - -Configuration infrastructure ----------------------------- - -The platform has an elaborated configuration system, consisting of -microcontrollers residing on the mother- and daughterboards known -as Motherboard/Daughterboard Configuration Controller (MCC and DCC). -The controllers are responsible for the platform initialization -(reset generation, flash programming, FPGA bitfiles loading etc.) -but also control clock generators, voltage regulators, gather -environmental data like temperature, power consumption etc. Even -the video output switch (FPGA) is controlled that way. - -The controllers are not mapped into normal memory address space -and must be accessed through bridges - other devices capable -of generating transactions on the configuration bus. - -The nodes describing configuration controllers must define -the following properties: -- compatible value: - compatible = "arm,vexpress,config-bus"; -- bridge phandle: - arm,vexpress,config-bridge = <phandle>; -and children describing available functions. - - -Platform topology ------------------ - -As Versatile Express can be configured in number of physically -different setups, the device tree should describe platform topology. -Root node and main motherboard node must define the following -property, describing physical location of the children nodes: -- site number: - arm,vexpress,site = <number>; - where 0 means motherboard, 1 or 2 are daugtherboard sites, - 0xf means "master" site (site containing main CPU tile) -- when daughterboards are stacked on one site, their position - in the stack be be described with: - arm,vexpress,position = <number>; -- when describing tiles consisting more than one DCC, its number - can be described with: - arm,vexpress,dcc = <number>; - -Any of the numbers above defaults to zero if not defined in -the node or any of its parent. - - -Motherboard ------------ - -The motherboard description file provides a single "motherboard" node -using 2 address cells corresponding to the Static Memory Bus used -between the motherboard and the tile. The first cell defines the Chip -Select (CS) line number, the second cell address offset within the CS. -All interrupt lines between the motherboard and the tile are active -high and are described using single cell. - -Optional properties of the "motherboard" node: -- motherboard's memory map variant: - arm,v2m-memory-map = "<name>"; - where name is one of: - - "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also - referred to as "ARM Cortex-A Series memory map": - arm,v2m-memory-map = "rs1"; - When this property is missing, the motherboard is using the original - memory map (also known as the "Legacy memory map", primarily used - with the original CoreTile Express A9x4) with peripherals on CS7. - -Motherboard .dtsi files provide a set of labelled peripherals that -can be used to obtain required phandle in the tile's "aliases" node: -- UARTs, note that the numbers correspond to the physical connectors - on the motherboard's back panel: - v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3 -- I2C controllers: - v2m_i2c_dvi and v2m_i2c_pcie -- SP804 timers: - v2m_timer01 and v2m_timer23 - -The tile description should define a "smb" node, describing the -Static Memory Bus between the tile and motherboard. It must define -the following properties: -- "simple-bus" compatible value (to ensure creation of the children) - compatible = "simple-bus"; -- mapping of the SMB CS/offset addresses into main address space: - #address-cells = <2>; - #size-cells = <1>; - ranges = <...>; -- interrupts mapping: - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <...>; - - -Example of a VE tile description (simplified) ---------------------------------------------- - -/dts-v1/; - -/ { - model = "V2P-CA5s"; - arm,hbi = <0x225>; - arm,vexpress,site = <0xf>; - compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress"; - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; - - chosen { }; - - aliases { - serial0 = &v2m_serial0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a5"; - reg = <0>; - }; - }; - - gic: interrupt-controller@2c001000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x2c001000 0x1000>, - <0x2c000100 0x100>; - }; - - dcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - osc@0 { - compatible = "arm,vexpress-osc"; - }; - }; - - smb { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - /* CS0 is visible at 0x08000000 */ - ranges = <0 0 0x08000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - /* Active high IRQ 0 is connected to GIC's SPI0 */ - interrupt-map = <0 0 0 &gic 0 0 4>; - - /include/ "vexpress-v2m-rs1.dtsi" - }; -}; - diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt index 4e4d387e38a5..513499fcdb5b 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt @@ -11,7 +11,7 @@ Required properties: Example: -dcp@80028000 { +dcp: crypto@80028000 { compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; reg = <0x80028000 0x2000>; interrupts = <52 53>; diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt index e8a35c71e947..db690b10e582 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt @@ -8,7 +8,7 @@ Required properties: Example: -sah@10025000 { +sah: crypto@10025000 { compatible = "fsl,imx27-sahara"; reg = < 0x10025000 0x800>; interrupts = <75>; diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index 2fe245ca816a..8f359f473ada 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -138,7 +138,7 @@ iMX6QDL/SX requires four clocks iMX6UL does only require three clocks - crypto: caam@2140000 { + crypto: crypto@2140000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml index 2e40f700e84f..8707df613f6c 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml @@ -17,7 +17,11 @@ description: |- properties: compatible: - const: allwinner,sun8i-h3-deinterlace + oneOf: + - const: allwinner,sun8i-h3-deinterlace + - items: + - const: allwinner,sun50i-a64-deinterlace + - const: allwinner,sun8i-h3-deinterlace reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt index b739f92da58e..1f90eb39870b 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt @@ -118,7 +118,7 @@ Tegra194: -------- pcie@14180000 { - compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */ diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt index 9fb682e47c29..38c5fa21f435 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt @@ -37,6 +37,7 @@ Required properties: - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl" - Tegra210: "nvidia,tegra210-xusb-padctl" - Tegra186: "nvidia,tegra186-xusb-padctl" + - Tegra194: "nvidia,tegra194-xusb-padctl" - reg: Physical base address and length of the controller's registers. - resets: Must contain an entry for each entry in reset-names. - reset-names: Must include the following entries: @@ -62,6 +63,10 @@ For Tegra186: - vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. - vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V. +For Tegra194: +- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply + 3.3 V. +- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. Pad nodes: ========== @@ -154,6 +159,11 @@ For Tegra210, the list of valid PHY nodes is given below: - sata: sata-0 - functions: "usb3-ss", "sata" +For Tegra194, the list of valid PHY nodes is given below: +- usb2: usb2-0, usb2-1, usb2-2, usb2-3 + - functions: "xusb" +- usb3: usb3-0, usb3-1, usb3-2, usb3-3 + - functions: "xusb" Port nodes: =========== @@ -174,6 +184,12 @@ Required properties: - "device": for USB device mode - "otg": for USB OTG mode +Required properties for OTG/Peripheral capable USB2 ports: +- usb-role-switch: Boolean property to indicate that the port support OTG or + peripheral mode. If present, the port supports switching between USB host + and peripheral roles. Connector should be added as subnode. + See usb/usb-conn-gpio.txt. + Optional properties: - nvidia,internal: A boolean property whose presence determines that a port is internal. In the absence of this property the port is considered to be @@ -221,6 +237,11 @@ Optional properties: is internal. In the absence of this property the port is considered to be external. +- maximum-speed: Only for Tegra194. A string property that specifies maximum + supported speed of a usb3 port. Valid values are: + - "super-speed-plus": default, the usb3 port supports USB 3.1 Gen 2 speed. + - "super-speed": the usb3 port supports USB 3.1 Gen 1 speed only. + For Tegra124 and Tegra132, the XUSB pad controller exposes the following ports: - 3x USB2: usb2-0, usb2-1, usb2-2 @@ -233,6 +254,9 @@ For Tegra210, the XUSB pad controller exposes the following ports: - 2x HSIC: hsic-0, hsic-1 - 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3 +For Tegra194, the XUSB pad controller exposes the following ports: +- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3 +- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3 Examples: ========= diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index 0565dc49e449..243a6b1e66ea 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -18,9 +18,14 @@ properties: "#size-cells": true compatible: - enum: - - allwinner,sun6i-a31-spi - - allwinner,sun8i-h3-spi + oneOf: + - const: allwinner,sun6i-a31-spi + - const: allwinner,sun8i-h3-spi + - items: + - enum: + - allwinner,sun8i-r40-spi + - allwinner,sun50i-h6-spi + - const: allwinner,sun8i-h3-spi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml new file mode 100644 index 000000000000..b84ed8ee8cfc --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC) + +description: + The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and + USB 3.0 SuperSpeed protocols. + +maintainers: + - Nagarjuna Kristam <nkristam@nvidia.com> + - JC Kuo <jckuo@nvidia.com> + - Thierry Reding <treding@nvidia.com> + +properties: + compatible: + items: + - enum: + - nvidia,tegra210-xudc # For Tegra210 + - nvidia,tegra186-xudc # For Tegra186 + + reg: + minItems: 2 + maxItems: 3 + items: + - description: XUSB device controller registers + - description: XUSB device PCI Config registers + - description: XUSB device registers. + + reg-names: + minItems: 2 + maxItems: 3 + items: + - const: base + - const: fpci + - const: ipfs + + interrupts: + maxItems: 1 + description: Must contain the XUSB device interrupt. + + clocks: + minItems: 4 + maxItems: 5 + items: + - description: Clock to enable core XUSB dev clock. + - description: Clock to enable XUSB super speed clock. + - description: Clock to enable XUSB super speed dev clock. + - description: Clock to enable XUSB high speed dev clock. + - description: Clock to enable XUSB full speed dev clock. + + clock-names: + minItems: 4 + maxItems: 5 + items: + - const: dev + - const: ss + - const: ss_src + - const: fs_src + - const: hs_src + + power-domains: + maxItems: 2 + items: + - description: XUSBB(device) power-domain + - description: XUSBA(superspeed) power-domain + + power-domain-names: + maxItems: 2 + items: + - const: dev + - const: ss + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + phandle to the XUSB pad controller that is used to configure the USB pads + used by the XUDC controller. + + phys: + minItems: 1 + description: + Must contain an entry for each entry in phy-names. + See ../phy/phy-bindings.txt for details. + + phy-names: + minItems: 1 + items: + - const: usb2-0 + - const: usb2-1 + - const: usb2-2 + - const: usb2-3 + - const: usb3-0 + - const: usb3-1 + - const: usb3-2 + - const: usb3-3 + + avddio-usb-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + hvdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - power-domains + - power-domain-names + - nvidia,xusb-padctl + - phys + - phy-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra210-xudc + then: + properties: + reg: + minItems: 3 + reg-names: + minItems: 3 + clocks: + minItems: 5 + clock-names: + minItems: 5 + required: + - avddio-usb-supply + - hvdd-usb-supply + + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra186-xudc + then: + properties: + reg: + maxItems: 2 + reg-names: + maxItems: 2 + clocks: + maxItems: 4 + clock-names: + maxItems: 4 + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@700d0000 { + compatible = "nvidia,tegra210-xudc"; + reg = <0x0 0x700d0000 0x0 0x8000>, + <0x0 0x700d8000 0x0 0x1000>, + <0x0 0x700d9000 0x0 0x1000>; + reg-names = "base", "fpci", "ipfs"; + + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>, + <&tegra_car TEGRA210_CLK_XUSB_SS>, + <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>; + clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src"; + + power-domains = <&pd_xusbdev>, <&pd_xusbss>; + power-domain-names = "dev", "ss"; + + nvidia,xusb-padctl = <&padctl>; + + phys = <µ_b>; + phy-names = "usb2-0"; + + avddio-usb-supply = <&vdd_pex_1v05>; + hvdd-usb-supply = <&vdd_3v3_sys>; + }; |