diff options
Diffstat (limited to 'Documentation/devicetree')
4 files changed, 218 insertions, 14 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml index 7257fd0ae4da..4f0b7c71313c 100644 --- a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml @@ -41,10 +41,26 @@ properties: properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Video port for MIPI DSI input + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + port@1: $ref: /schemas/graph.yaml#/properties/port description: diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml new file mode 100644 index 000000000000..9a6e9b25d14a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge. + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS + or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI. + +properties: + compatible: + enum: + - lontium,lt9211 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + vccio-supply: + description: Regulator for 1.8V IO power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI DSI port-1 for MIPI input or + LVDS port-1 for LVDS input or DPI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI input or LVDS port-2 + for LVDS input. Used in combination with primary + port-1 to drive higher resolution displays + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI DSI port-1 for MIPI output or + LVDS port-1 for LVDS output or DPI output. + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI output or LVDS port-2 + for LVDS output. Used in combination with primary + port-1 to drive higher resolution displays. + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - vccio-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@3b { + compatible = "lontium,lt9211"; + reg = <0x3b>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <<9211_1v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml index 9baafd0c42dd..3fbd87c2c120 100644 --- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml +++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml @@ -12,11 +12,22 @@ maintainers: properties: compatible: - enum: - - solomon,ssd1305fb-i2c - - solomon,ssd1306fb-i2c - - solomon,ssd1307fb-i2c - - solomon,ssd1309fb-i2c + oneOf: + # Deprecated compatible strings + - items: + - enum: + - solomon,ssd1305fb-i2c + - solomon,ssd1306fb-i2c + - solomon,ssd1307fb-i2c + - solomon,ssd1309fb-i2c + deprecated: true + - items: + - enum: + - sinowealth,sh1106 + - solomon,ssd1305 + - solomon,ssd1306 + - solomon,ssd1307 + - solomon,ssd1309 reg: maxItems: 1 @@ -27,9 +38,20 @@ properties: reset-gpios: maxItems: 1 + # Only required for SPI + dc-gpios: + description: + GPIO connected to the controller's D/C# (Data/Command) pin, + that is needed for 4-wire SPI to tell the controller if the + data sent is for a command register or the display data RAM + maxItems: 1 + vbat-supply: description: The supply for VBAT + # Only required for SPI + spi-max-frequency: true + solomon,height: $ref: /schemas/types.yaml#/definitions/uint32 default: 16 @@ -135,7 +157,21 @@ allOf: properties: compatible: contains: - const: solomon,ssd1305fb-i2c + const: sinowealth,sh1106 + then: + properties: + solomon,dclk-div: + default: 1 + solomon,dclk-frq: + default: 5 + + - if: + properties: + compatible: + contains: + enum: + - solomon,ssd1305-i2c + - solomon,ssd1305 then: properties: solomon,dclk-div: @@ -147,7 +183,9 @@ allOf: properties: compatible: contains: - const: solomon,ssd1306fb-i2c + enum: + - solomon,ssd1306-i2c + - solomon,ssd1306 then: properties: solomon,dclk-div: @@ -159,7 +197,9 @@ allOf: properties: compatible: contains: - const: solomon,ssd1307fb-i2c + enum: + - solomon,ssd1307-i2c + - solomon,ssd1307 then: properties: solomon,dclk-div: @@ -173,7 +213,9 @@ allOf: properties: compatible: contains: - const: solomon,ssd1309fb-i2c + enum: + - solomon,ssd1309-i2c + - solomon,ssd1309 then: properties: solomon,dclk-div: @@ -189,15 +231,15 @@ examples: #address-cells = <1>; #size-cells = <0>; - ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; + ssd1307_i2c: oled@3c { + compatible = "solomon,ssd1307"; reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; }; - ssd1306: oled@3d { - compatible = "solomon,ssd1306fb-i2c"; + ssd1306_i2c: oled@3d { + compatible = "solomon,ssd1306"; reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; @@ -207,3 +249,30 @@ examples: solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; }; }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ssd1307_spi: oled@0 { + compatible = "solomon,ssd1307"; + reg = <0x0>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + }; + + ssd1306_spi: oled@1 { + compatible = "solomon,ssd1306"; + reg = <0x1>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 01430973ecec..79b72e370ade 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1130,6 +1130,8 @@ patternProperties: description: Sinlinx Electronics Technology Co., LTD "^sinovoip,.*": description: SinoVoip Co., Ltd + "^sinowealth,.*": + description: SINO WEALTH Electronic Ltd. "^sipeed,.*": description: Shenzhen Sipeed Technology Co., Ltd. "^sirf,.*": |