diff options
Diffstat (limited to 'Documentation/devicetree')
373 files changed, 8953 insertions, 3531 deletions
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt deleted file mode 100644 index 82edbaaa3f85..000000000000 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt +++ /dev/null @@ -1,25 +0,0 @@ -Altera SOCFPGA System Manager - -Required properties: -- compatible : "altr,sys-mgr" -- reg : Should contain 1 register ranges(address and length) -- cpu1-start-addr : CPU1 start address in hex. - -Example: - sysmgr@ffd08000 { - compatible = "altr,sys-mgr"; - reg = <0xffd08000 0x1000>; - cpu1-start-addr = <0xffd080c4>; - }; - -ARM64 - Stratix10 -Required properties: -- compatible : "altr,sys-mgr-s10" -- reg : Should contain 1 register range(address and length) - for system manager register. - -Example: - sysmgr@ffd12000 { - compatible = "altr,sys-mgr-s10"; - reg = <0xffd12000 0x228>; - }; diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml index 04a8c37b4aff..742dc4e25d3b 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml @@ -38,6 +38,12 @@ properties: enum: - arm,coresight-dummy-source + arm,static-trace-id: + description: If dummy source needs static id support, use this to set trace id. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 111 + out-ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml index 1892a091ac35..a6f793ea03b6 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml @@ -45,7 +45,22 @@ properties: patternProperties: '^port@[01]$': description: Output connections to CoreSight Trace bus - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + filter-source: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the coresight trace source device matching the + hard coded filtering for this port + + remote-endpoint: true required: - compatible @@ -72,6 +87,7 @@ examples: reg = <0>; replicator_out_port0: endpoint { remote-endpoint = <&etb_in_port>; + filter-source = <&tpdm_video>; }; }; @@ -79,6 +95,7 @@ examples: reg = <1>; replicator_out_port1: endpoint { remote-endpoint = <&tpiu_in_port>; + filter-source = <&tpdm_mdss>; }; }; }; diff --git a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml index f725e6940993..9c2c9ac9705a 100644 --- a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml +++ b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml @@ -23,7 +23,7 @@ description: | properties: $nodename: - pattern: "^ete([0-9a-f]+)$" + pattern: "^ete(-[0-9]+)?$" compatible: items: - const: arm,embedded-trace-extension @@ -55,13 +55,13 @@ examples: # An ETE node without legacy CoreSight connections - | - ete0 { + ete-0 { compatible = "arm,embedded-trace-extension"; cpu = <&cpu_0>; }; # An ETE node with legacy CoreSight connections - | - ete1 { + ete-1 { compatible = "arm,embedded-trace-extension"; cpu = <&cpu_1>; diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index 2f92b8ab08fa..01333ac111fb 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -74,6 +74,7 @@ properties: - description: AST2600 based boards items: - enum: + - ampere,mtjefferson-bmc - ampere,mtmitchell-bmc - aspeed,ast2600-evb - aspeed,ast2600-evb-a1 @@ -91,6 +92,7 @@ properties: - ibm,everest-bmc - ibm,fuji-bmc - ibm,rainier-bmc + - ibm,sbp1-bmc - ibm,system1-bmc - ibm,tacoma-bmc - inventec,starscream-bmc diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml index 7160ec80ac1b..0ec29366e6c2 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml @@ -180,6 +180,13 @@ properties: - const: atmel,sama5d4 - const: atmel,sama5 + - description: Microchip SAMA7D65 Curiosity Board + items: + - const: microchip,sama7d65-curiosity + - const: microchip,sama7d65 + - const: microchip,sama7d6 + - const: microchip,sama7 + - items: - const: microchip,sama7g5ek # SAMA7G5 Evaluation Kit - const: microchip,sama7g5 diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt index 76e2b7978250..1a173e92bb13 100644 --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt @@ -13,6 +13,7 @@ PIT Timer required properties: PIT64B Timer required properties: - compatible: Should be "microchip,sam9x60-pit64b" or "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b" + "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b" - reg: Should contain registers location and length - interrupts: Should contain interrupt for PIT64B timer - clocks: Should contain the available clock sources for PIT64B timer. @@ -27,12 +28,13 @@ Its subnodes can be: - watchdog: compatible should be "atmel,at91rm9200-wdt" RAMC SDRAM/DDR Controller required properties: -- compatible: Should be "atmel,at91rm9200-sdramc", "syscon" - "atmel,at91sam9260-sdramc", - "atmel,at91sam9g45-ddramc", - "atmel,sama5d3-ddramc", - "microchip,sam9x60-ddramc", - "microchip,sama7g5-uddrc", +- compatible: Should be "atmel,at91rm9200-sdramc", "syscon" or + "atmel,at91sam9260-sdramc" or + "atmel,at91sam9g45-ddramc" or + "atmel,sama5d3-ddramc" or + "microchip,sam9x60-ddramc" or + "microchip,sama7g5-uddrc" or + "microchip,sama7d65-uddrc", "microchip,sama7g5-uddrc" or "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc". - reg: Should contain registers location and length diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml index 07892cbdd23c..354bb1420cdd 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml @@ -34,6 +34,7 @@ properties: - enum: - netgear,r8000p - tplink,archer-c2300-v1 + - zyxel,ex3510b - const: brcm,bcm4906 - const: brcm,bcm4908 - const: brcm,bcmbca @@ -115,6 +116,7 @@ properties: items: - enum: - brcm,bcm96846 + - genexis,xg6846b - const: brcm,bcm6846 - const: brcm,bcmbca diff --git a/Documentation/devicetree/bindings/arm/blaize.yaml b/Documentation/devicetree/bindings/arm/blaize.yaml new file mode 100644 index 000000000000..af39e2756407 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/blaize.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/blaize.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Blaize Platforms + +maintainers: + - James Cowgill <james.cowgill@blaize.com> + - Matt Redfearn <matt.redfearn@blaize.com> + - Neil Jones <neil.jones@blaize.com> + - Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com> + +description: | + Blaize Platforms using SoCs designed by Blaize Inc. + + The products based on the BLZP1600 SoC: + + - BLZP1600-SoM: SoM (System on Module) + - BLZP1600-CB2: Development board CB2 based on BLZP1600-SoM + + BLZP1600 SoC integrates a dual core ARM Cortex A53 cluster + and a Blaize Graph Streaming Processor for AI and ML workloads, + plus a suite of connectivity and other peripherals. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Blaize BLZP1600 based boards + items: + - enum: + - blaize,blzp1600-cb2 + - const: blaize,blzp1600 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 6e0dcf4307f1..371317554863 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -1106,6 +1106,15 @@ properties: - ysoft,imx8mp-iota2-lumpy # Y Soft i.MX8MP IOTA2 Lumpy Board - const: fsl,imx8mp + - description: ABB Boards with i.MX8M Plus Modules from ADLink + items: + - enum: + - abb,imx8mp-aristanetos3-adpismarc # i.MX8MP ABB SoM on PI SMARC Board + - abb,imx8mp-aristanetos3-helios # i.MX8MP ABB SoM on helios Board + - abb,imx8mp-aristanetos3-proton2s # i.MX8MP ABB SoM on proton2s Board + - const: abb,imx8mp-aristanetos3-som # i.MX8MP ABB SoM + - const: fsl,imx8mp + - description: Avnet (MSC Branded) Boards with SM2S i.MX8M Plus Modules items: - const: avnet,sm2s-imx8mp-14N0600E-ep1 # SM2S-IMX8PLUS-14N0600E on SM2-MB-EP1 Carrier Board diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 1d4bb50fcd8d..3ce34d68c213 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -239,6 +239,34 @@ properties: - enum: - mediatek,mt8183-pumpkin - const: mediatek,mt8183 + - description: Google Chinchou (Asus Chromebook CZ1104CM2A/CZ1204CM2A) + items: + - const: google,chinchou-sku0 + - const: google,chinchou-sku2 + - const: google,chinchou-sku4 + - const: google,chinchou-sku5 + - const: google,chinchou + - const: mediatek,mt8186 + - description: Google Chinchou (Asus Chromebook CZ1104FM2A/CZ1204FM2A/CZ1104CM2A/CZ1204CM2A) + items: + - const: google,chinchou-sku1 + - const: google,chinchou-sku3 + - const: google,chinchou-sku6 + - const: google,chinchou-sku7 + - const: google,chinchou-sku17 + - const: google,chinchou-sku20 + - const: google,chinchou-sku22 + - const: google,chinchou-sku23 + - const: google,chinchou + - const: mediatek,mt8186 + - description: Google Chinchou360 (Asus Chromebook CZ1104FM2A/CZ1204FM2A Flip) + items: + - const: google,chinchou-sku16 + - const: google,chinchou-sku18 + - const: google,chinchou-sku19 + - const: google,chinchou-sku21 + - const: google,chinchou + - const: mediatek,mt8186 - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868)) items: - const: google,steelix-sku393219 @@ -263,6 +291,19 @@ properties: - const: google,steelix-sku196608 - const: google,steelix - const: mediatek,mt8186 + - description: Google Starmie (ASUS Chromebook Enterprise CM30 (CM3001)) + items: + - const: google,starmie-sku0 + - const: google,starmie-sku2 + - const: google,starmie-sku3 + - const: google,starmie + - const: mediatek,mt8186 + - description: Google Starmie (ASUS Chromebook Enterprise CM30 (CM3001)) + items: + - const: google,starmie-sku1 + - const: google,starmie-sku4 + - const: google,starmie + - const: mediatek,mt8186 - description: Google Steelix (Lenovo 300e Yoga Chromebook Gen 4) items: - enum: @@ -307,6 +348,19 @@ properties: - enum: - mediatek,mt8186-evb - const: mediatek,mt8186 + - description: Google Ciri (Lenovo Chromebook Duet (11", 9)) + items: + - enum: + - google,ciri-sku0 + - google,ciri-sku1 + - google,ciri-sku2 + - google,ciri-sku3 + - google,ciri-sku4 + - google,ciri-sku5 + - google,ciri-sku6 + - google,ciri-sku7 + - const: google,ciri + - const: mediatek,mt8188 - items: - enum: - mediatek,mt8188-evb @@ -316,12 +370,6 @@ properties: - const: google,hayato-rev1 - const: google,hayato - const: mediatek,mt8192 - - description: Google Hayato rev5 - items: - - const: google,hayato-rev5-sku2 - - const: google,hayato-sku2 - - const: google,hayato - - const: mediatek,mt8192 - description: Google Spherion (Acer Chromebook 514) items: - const: google,spherion-rev3 @@ -330,11 +378,6 @@ properties: - const: google,spherion-rev0 - const: google,spherion - const: mediatek,mt8192 - - description: Google Spherion rev4 (Acer Chromebook 514) - items: - - const: google,spherion-rev4 - - const: google,spherion - - const: mediatek,mt8192 - items: - enum: - mediatek,mt8192-evb diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml index d0751a572af3..a77d68dcad4e 100644 --- a/Documentation/devicetree/bindings/arm/qcom-soc.yaml +++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml @@ -23,7 +23,7 @@ description: | select: properties: compatible: - pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" + pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1[ep])[0-9]+.*$" required: - compatible @@ -31,7 +31,8 @@ properties: compatible: oneOf: # Preferred naming style for compatibles of SoC components: - - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+(pro)?-.*$" + - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1[ep])[0-9]+(pro)?-.*$" + - pattern: "^qcom,sar[0-9]+[a-z]?-.*$" - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$" # Legacy namings - variations of existing patterns/compatibles are OK, @@ -39,9 +40,9 @@ properties: - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" - - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" + - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1[ep])[0-9]+.*$" - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" - - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" + - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1[ep])[0-9]+.*$" - enum: - qcom,dsi-ctrl-6g-qcm2290 - qcom,gpucc-sdm630 diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 9679fed7259b..618a87693ac1 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -19,29 +19,42 @@ description: | apq8016 apq8026 + apq8064 apq8074 apq8084 + apq8094 apq8096 ipq4018 + ipq4019 ipq5018 ipq5332 + ipq5424 ipq6018 + ipq8064 ipq8074 ipq9574 mdm9615 msm8226 + msm8660 msm8916 + msm8917 + msm8926 + msm8929 msm8939 msm8953 msm8956 msm8960 msm8974 + msm8974pro msm8976 msm8992 msm8994 msm8996 + msm8996pro msm8998 qcs404 + qcs615 + qcs8300 qcs8550 qcm2290 qcm6490 @@ -53,6 +66,7 @@ description: | sa8155p sa8540p sa8775p + sar2130p sc7180 sc7280 sc8180x @@ -84,7 +98,10 @@ description: | sm8450 sm8550 sm8650 + sm8750 + x1e78100 x1e80100 + x1p42100 There are many devices in the list below that run the standard ChromeOS bootloader setup and use the open source depthcharge bootloader to boot the @@ -252,6 +269,11 @@ properties: - items: - enum: + - xiaomi,riva + - const: qcom,msm8917 + + - items: + - enum: - motorola,potter - xiaomi,daisy - xiaomi,mido @@ -354,6 +376,11 @@ properties: - items: - enum: + - qcom,ipq5424-rdp466 + - const: qcom,ipq5424 + + - items: + - enum: - mikrotik,rb3011 - qcom,ipq8064-ap148 - const: qcom,ipq8064 @@ -408,6 +435,12 @@ properties: - qcom,qru1000-idp - const: qcom,qru1000 + - description: Qualcomm AR2 Gen1 platform + items: + - enum: + - qcom,qar2130p + - const: qcom,sar2130p + - items: - enum: - acer,aspire1 @@ -822,8 +855,10 @@ properties: - items: - enum: + - huawei,gaokun3 - lenovo,thinkpad-x13s - microsoft,arcata + - microsoft,blackrock - qcom,sc8280xp-crd - qcom,sc8280xp-qrd - const: qcom,sc8280xp @@ -900,6 +935,16 @@ properties: - items: - enum: + - qcom,qcs8300-ride + - const: qcom,qcs8300 + + - items: + - enum: + - qcom,qcs615-ride + - const: qcom,qcs615 + + - items: + - enum: - qcom,sa8155p-adp - const: qcom,sa8155p @@ -1066,6 +1111,18 @@ properties: - items: - enum: + - qcom,sm8750-mtp + - qcom,sm8750-qrd + - const: qcom,sm8750 + + - items: + - enum: + - qcom,x1e001de-devkit + - const: qcom,x1e001de + - const: qcom,x1e80100 + + - items: + - enum: - lenovo,thinkpad-t14s - const: qcom,x1e78100 - const: qcom,x1e80100 @@ -1074,6 +1131,7 @@ properties: - enum: - asus,vivobook-s15 - dell,xps13-9345 + - hp,omnibook-x14 - lenovo,yoga-slim7x - microsoft,romulus13 - microsoft,romulus15 @@ -1081,6 +1139,11 @@ properties: - qcom,x1e80100-qcp - const: qcom,x1e80100 + - items: + - enum: + - qcom,x1p42100-crd + - const: qcom,x1p42100 + # Board compatibles go above qcom,msm-id: @@ -1158,6 +1221,7 @@ allOf: - qcom,apq8026 - qcom,apq8094 - qcom,apq8096 + - qcom,msm8917 - qcom,msm8939 - qcom,msm8953 - qcom,msm8956 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 753199a12923..522a6f0450ea 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -81,6 +81,17 @@ properties: - const: azw,beelink-a1 - const: rockchip,rk3328 + - description: BigTreeTech CB2 Manta M4/8P + items: + - const: bigtreetech,cb2-manta + - const: bigtreetech,cb2 + - const: rockchip,rk3566 + + - description: BigTreeTech Pi 2 + items: + - const: bigtreetech,pi2 + - const: rockchip,rk3566 + - description: bq Curie 2 tablet items: - const: mundoreader,bq-curie2 @@ -167,6 +178,13 @@ properties: - const: engicam,px30-core - const: rockchip,px30 + - description: Firefly Core-3588J-based boards + items: + - enum: + - firefly,itx-3588j + - const: firefly,core-3588j + - const: rockchip,rk3588 + - description: Firefly Core-PX30-JD4 on MB-JD4-PX30 baseboard items: - const: firefly,px30-jd4-core-mb @@ -597,6 +615,11 @@ properties: - const: google,veyron - const: rockchip,rk3288 + - description: H96 Max V58 TV Box + items: + - const: haochuangyi,h96-max-v58 + - const: rockchip,rk3588 + - description: Haoyu MarsBoard RK3066 items: - const: haoyu,marsboard-rk3066 @@ -812,6 +835,12 @@ properties: - const: radxa,e20c - const: rockchip,rk3528 + - description: Radxa E52C + items: + - const: radxa,e52c + - const: rockchip,rk3582 + - const: rockchip,rk3588s + - description: Radxa Rock items: - const: radxa,rock @@ -1006,6 +1035,21 @@ properties: - const: rockchip,rk3399-sapphire-excavator - const: rockchip,rk3399 + - description: Rockchip RK3566 BOX Evaluation Demo board + items: + - const: rockchip,rk3566-box-demo + - const: rockchip,rk3566 + + - description: Rockchip RK3568 Evaluation board + items: + - const: rockchip,rk3568-evb1-v10 + - const: rockchip,rk3568 + + - description: Rockchip RK3576 Evaluation board + items: + - const: rockchip,rk3576-evb1-v10 + - const: rockchip,rk3576 + - description: Rockchip RK3588 Evaluation board items: - const: rockchip,rk3588-evb1-v10 @@ -1026,6 +1070,23 @@ properties: - const: rockchip,rk3588-toybrick-x0 - const: rockchip,rk3588 + - description: Sinovoip RK3308 Banana Pi P2 Pro + items: + - const: sinovoip,rk3308-bpi-p2pro + - const: rockchip,rk3308 + + - description: Sinovoip RK3568 Banana Pi R2 Pro + items: + - const: sinovoip,rk3568-bpi-r2pro + - const: rockchip,rk3568 + + - description: Sonoff iHost Smart Home Hub + items: + - const: itead,sonoff-ihost + - enum: + - rockchip,rv1126 + - rockchip,rv1109 + - description: Theobroma Systems PX30-uQ7 with Haikou baseboard items: - const: tsd,px30-ringneck-haikou @@ -1075,9 +1136,11 @@ properties: - const: xunlong,orangepi-3b - const: rockchip,rk3566 - - description: Xunlong Orange Pi 5 Plus + - description: Xunlong Orange Pi 5 Max/Plus items: - - const: xunlong,orangepi-5-plus + - enum: + - xunlong,orangepi-5-max + - xunlong,orangepi-5-plus - const: rockchip,rk3588 - description: Xunlong Orange Pi R1 Plus / LTS @@ -1099,33 +1162,6 @@ properties: - const: zkmagic,a95x-z2 - const: rockchip,rk3318 - - description: Rockchip RK3566 BOX Evaluation Demo board - items: - - const: rockchip,rk3566-box-demo - - const: rockchip,rk3566 - - - description: Rockchip RK3568 Evaluation board - items: - - const: rockchip,rk3568-evb1-v10 - - const: rockchip,rk3568 - - - description: Sinovoip RK3308 Banana Pi P2 Pro - items: - - const: sinovoip,rk3308-bpi-p2pro - - const: rockchip,rk3308 - - - description: Sinovoip RK3568 Banana Pi R2 Pro - items: - - const: sinovoip,rk3568-bpi-r2pro - - const: rockchip,rk3568 - - - description: Sonoff iHost Smart Home Hub - items: - - const: itead,sonoff-ihost - - enum: - - rockchip,rv1126 - - rockchip,rv1109 - additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index b5ba5ffc36d6..fab29f95d8e6 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -240,6 +240,9 @@ properties: items: - enum: - samsung,c1s # Samsung Galaxy Note20 5G (SM-N981B) + - samsung,r8s # Samsung Galaxy S20 FE (SM-G780F) + - samsung,x1s # Samsung Galaxy S20 5G (SM-G981B) + - samsung,x1slte # Samsung Galaxy S20 (SM-G980F) - const: samsung,exynos990 - description: Exynos Auto v9 based boards diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 703d4b574398..b6c56d4ce6b9 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -91,6 +91,13 @@ properties: - const: dh,stm32mp153c-dhcor-som - const: st,stm32mp153 + - description: Octavo OSD32MP153 System-in-Package based boards + items: + - enum: + - lxa,stm32mp153c-tac-gen3 # Linux Automation TAC (Generation 3) + - const: oct,stm32mp153x-osd32 + - const: st,stm32mp153 + - items: - enum: - shiratech,stm32mp157a-iot-box # IoT Box diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml index 03b1941eaa33..e5effbb4a606 100644 --- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml @@ -20,6 +20,7 @@ description: | properties: compatible: enum: + - qcom,ipq5424-llcc - qcom,qcs615-llcc - qcom,qcs8300-llcc - qcom,qdu1000-llcc @@ -42,11 +43,11 @@ properties: - qcom,x1e80100-llcc reg: - minItems: 2 + minItems: 1 maxItems: 10 reg-names: - minItems: 2 + minItems: 1 maxItems: 10 interrupts: @@ -71,6 +72,21 @@ allOf: compatible: contains: enum: + - qcom,ipq5424-llcc + then: + properties: + reg: + items: + - description: LLCC0 base register region + reg-names: + items: + - const: llcc0_base + + - if: + properties: + compatible: + contains: + enum: - qcom,sar1130p-llcc - qcom,sar2130p-llcc then: diff --git a/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml deleted file mode 100644 index c94ab8f9e0b8..000000000000 --- a/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml +++ /dev/null @@ -1,36 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/chrome/google,cros-kbd-led-backlight.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: ChromeOS keyboard backlight LED driver. - -maintainers: - - Tzung-Bi Shih <tzungbi@kernel.org> - -properties: - compatible: - const: google,cros-kbd-led-backlight - -required: - - compatible - -additionalProperties: false - -examples: - - | - spi { - #address-cells = <1>; - #size-cells = <0>; - - cros_ec: ec@0 { - compatible = "google,cros-ec-spi"; - reg = <0>; - interrupts = <15 0>; - - kbd-led-backlight { - compatible = "google,cros-kbd-led-backlight"; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml index c9eb60776b4d..885d47dd5724 100644 --- a/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml +++ b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml @@ -43,6 +43,7 @@ properties: - atmel,sama5d4-pmc - microchip,sam9x60-pmc - microchip,sam9x7-pmc + - microchip,sama7d65-pmc - microchip,sama7g5-pmc - const: syscon @@ -90,6 +91,7 @@ allOf: enum: - microchip,sam9x60-pmc - microchip,sam9x7-pmc + - microchip,sama7d65-pmc - microchip,sama7g5-pmc then: properties: diff --git a/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml index c2283cd07f05..d4cf8ae2961e 100644 --- a/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml +++ b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml @@ -20,6 +20,7 @@ properties: - items: - enum: - microchip,sam9x7-sckc + - microchip,sama7d65-sckc - microchip,sama7g5-sckc - const: microchip,sam9x60-sckc diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml new file mode 100644 index 000000000000..f869b3739be8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,ipq9574-cmn-pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm CMN PLL Clock Controller on IPQ SoC + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Luo Jie <quic_luoj@quicinc.com> + +description: + The CMN (or common) PLL clock controller expects a reference + input clock. This reference clock is from the on-board Wi-Fi. + The CMN PLL supplies a number of fixed rate output clocks to + the devices providing networking functions and to GCC. These + networking hardware include PPE (packet process engine), PCS + and the externally connected switch or PHY devices. The CMN + PLL block also outputs fixed rate clocks to GCC. The PLL's + primary function is to enable fixed rate output clocks for + networking hardware functions used with the IPQ SoC. + +properties: + compatible: + enum: + - qcom,ipq9574-cmn-pll + + reg: + maxItems: 1 + + clocks: + items: + - description: The reference clock. The supported clock rates include + 25000000, 31250000, 40000000, 48000000, 50000000 and 96000000 HZ. + - description: The AHB clock + - description: The SYS clock + description: + The reference clock is the source clock of CMN PLL, which is from the + Wi-Fi. The AHB and SYS clocks must be enabled to access CMN PLL + clock registers. + + clock-names: + items: + - const: ref + - const: ahb + - const: sys + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,ipq-cmn-pll.h> + #include <dt-bindings/clock/qcom,ipq9574-gcc.h> + + cmn_pll: clock-controller@9b000 { + compatible = "qcom,ipq9574-cmn-pll"; + reg = <0x0009b000 0x800>; + clocks = <&cmn_pll_ref_clk>, + <&gcc GCC_CMN_12GPLL_AHB_CLK>, + <&gcc GCC_CMN_12GPLL_SYS_CLK>; + clock-names = "ref", "ahb", "sys"; + #clock-cells = <1>; + assigned-clocks = <&cmn_pll CMN_PLL_CLK>; + assigned-clock-rates-u64 = /bits/ 64 <12000000000>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml index aa35a40648ba..59ac288ca5f1 100644 --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml @@ -78,6 +78,7 @@ allOf: then: properties: clocks: + minItems: 8 items: - description: Board PXO source - description: PLL 3 clock @@ -87,8 +88,10 @@ allOf: - description: DSI phy instance 2 dsi clock - description: DSI phy instance 2 byte clock - description: HDMI phy PLL clock + - description: LVDS PLL clock clock-names: + minItems: 8 items: - const: pxo - const: pll3 @@ -98,6 +101,7 @@ allOf: - const: dsi2pll - const: dsi2pllbyte - const: hdmipll + - const: lvdspll - if: properties: diff --git a/Documentation/devicetree/bindings/clock/qcom,qcs615-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcs615-gcc.yaml new file mode 100644 index 000000000000..4a828e102d25 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,qcs615-gcc.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,qcs615-gcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on QCS615 + +maintainers: + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on QCS615. + + See also: include/dt-bindings/clock/qcom,qcs615-gcc.h + +properties: + compatible: + const: qcom,qcs615-gcc + + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: sleep_clk + +required: + - compatible + - clocks + - clock-names + - '#power-domain-cells' + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,qcs615-gcc"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml index 02fcffe93f1a..be3835e2e043 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml @@ -33,6 +33,8 @@ properties: - qcom,rpmcc-msm8916 - qcom,rpmcc-msm8917 - qcom,rpmcc-msm8936 + - qcom,rpmcc-msm8937 + - qcom,rpmcc-msm8940 - qcom,rpmcc-msm8953 - qcom,rpmcc-msm8974 - qcom,rpmcc-msm8976 @@ -110,6 +112,8 @@ allOf: - qcom,rpmcc-msm8916 - qcom,rpmcc-msm8917 - qcom,rpmcc-msm8936 + - qcom,rpmcc-msm8937 + - qcom,rpmcc-msm8940 - qcom,rpmcc-msm8953 - qcom,rpmcc-msm8974 - qcom,rpmcc-msm8976 diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index a561a306b947..dcb872b9cf3e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -17,6 +17,7 @@ description: | properties: compatible: enum: + - qcom,qcs615-rpmh-clk - qcom,qdu1000-rpmh-clk - qcom,sa8775p-rpmh-clk - qcom,sar2130p-rpmh-clk @@ -37,6 +38,7 @@ properties: - qcom,sm8450-rpmh-clk - qcom,sm8550-rpmh-clk - qcom,sm8650-rpmh-clk + - qcom,sm8750-rpmh-clk - qcom,x1e80100-rpmh-clk clocks: diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml index deee5423d66e..488d63959424 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml @@ -18,12 +18,6 @@ description: | include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h properties: - clocks: true - - clock-names: true - - reg: true - compatible: enum: - qcom,sc7280-lpassaoncc @@ -31,12 +25,24 @@ properties: - qcom,sc7280-lpasscorecc - qcom,sc7280-lpasshm - power-domains: - maxItems: 1 + reg: + minItems: 1 + maxItems: 2 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 '#clock-cells': const: 1 + power-domains: + maxItems: 1 + '#power-domain-cells': const: 1 @@ -57,8 +63,6 @@ required: - '#clock-cells' - '#power-domain-cells' -additionalProperties: false - allOf: - if: properties: @@ -125,6 +129,9 @@ allOf: reg: maxItems: 1 + +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmh.h> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml index 810b852ae371..fa95c3a1ba3a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml @@ -20,7 +20,11 @@ allOf: properties: compatible: - const: qcom,sdm845-camcc + oneOf: + - items: + - const: qcom,sdm670-camcc + - const: qcom,sdm845-camcc + - const: qcom,sdm845-camcc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-lpasscc.yaml new file mode 100644 index 000000000000..8cbab3fbb660 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-lpasscc.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm6115-lpasscc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm LPASS Core & Audio Clock Controller on SM6115 + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm LPASS core and audio clock controllers provide audio-related resets + on SM6115 and its derivatives. + + See also:: + include/dt-bindings/clock/qcom,sm6115-lpasscc.h + +properties: + compatible: + enum: + - qcom,sm6115-lpassaudiocc + - qcom,sm6115-lpasscc + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + lpass_audiocc: clock-controller@a6a9000 { + compatible = "qcom,sm6115-lpassaudiocc"; + reg = <0x0a6a9000 0x1000>; + #reset-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml index 0766f66c7dc4..b88b6c9b399a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml @@ -19,7 +19,6 @@ description: | include/dt-bindings/clock/qcom,sm8450-camcc.h include/dt-bindings/clock/qcom,sm8550-camcc.h include/dt-bindings/clock/qcom,sm8650-camcc.h - include/dt-bindings/clock/qcom,x1e80100-camcc.h properties: compatible: @@ -29,7 +28,6 @@ properties: - qcom,sm8475-camcc - qcom,sm8550-camcc - qcom,sm8650-camcc - - qcom,x1e80100-camcc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml index 5c65f5ecf0f3..02968632fb3a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml @@ -32,6 +32,7 @@ properties: - qcom,sm8550-gpucc - qcom,sm8650-gpucc - qcom,x1e80100-gpucc + - qcom,x1p42100-gpucc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml index c57d55a9293c..30e4b4631575 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml @@ -12,11 +12,12 @@ maintainers: description: | Qualcomm display clock control module provides the clocks, resets and power - domains on SM8550. + domains on SM8550, SM8650, SM8750 and few other platforms. See also: - include/dt-bindings/clock/qcom,sm8550-dispcc.h - include/dt-bindings/clock/qcom,sm8650-dispcc.h + - include/dt-bindings/clock/qcom,sm8750-dispcc.h - include/dt-bindings/clock/qcom,x1e80100-dispcc.h properties: @@ -25,6 +26,7 @@ properties: - qcom,sar2130p-dispcc - qcom,sm8550-dispcc - qcom,sm8650-dispcc + - qcom,sm8750-dispcc - qcom,x1e80100-dispcc clocks: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml index 3b546deb514a..f3afbb25e868 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml @@ -16,6 +16,7 @@ description: | See also: - include/dt-bindings/clock/qcom,sm8550-tcsr.h - include/dt-bindings/clock/qcom,sm8650-tcsr.h + - include/dt-bindings/clock/qcom,sm8750-tcsr.h properties: compatible: @@ -24,6 +25,7 @@ properties: - qcom,sar2130p-tcsr - qcom,sm8550-tcsr - qcom,sm8650-tcsr + - qcom,sm8750-tcsr - qcom,x1e80100-tcsr - const: syscon diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml new file mode 100644 index 000000000000..aab7039fd28d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8750-gcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on SM8750 + +maintainers: + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on SM8750 + + See also: include/dt-bindings/clock/qcom,sm8750-gcc.h + +properties: + compatible: + const: qcom,sm8750-gcc + + clocks: + items: + - description: Board XO source + - description: Board Always On XO source + - description: Sleep clock source + - description: PCIE 0 Pipe clock source + - description: UFS Phy Rx symbol 0 clock source + - description: UFS Phy Rx symbol 1 clock source + - description: UFS Phy Tx symbol 0 clock source + - description: USB3 Phy wrapper pipe clock source + +required: + - compatible + - clocks + - '#power-domain-cells' + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,sm8750-gcc"; + reg = <0x00100000 0x001f4200>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie0_phy>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, + <&usb_1_qmpphy>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml new file mode 100644 index 000000000000..5bbbaa15a260 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,x1e80100-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller on x1e80100 + +maintainers: + - Bryan O'Donoghue <bryan.odonoghue@linaro.org> + +description: | + Qualcomm camera clock control module provides the clocks, resets and power + domains on x1e80100. + + See also: + include/dt-bindings/clock/qcom,x1e80100-camcc.h + +allOf: + - $ref: qcom,gcc.yaml# + +properties: + compatible: + enum: + - qcom,x1e80100-camcc + + reg: + maxItems: 1 + + clocks: + items: + - description: Camera AHB clock from GCC + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + + power-domains: + items: + - description: A phandle to the MXC power-domain + - description: A phandle to the MMCX power-domain + + required-opps: + maxItems: 1 + description: + A phandle to an OPP node describing MMCX performance points. + +required: + - compatible + - clocks + - power-domains + - required-opps + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,x1e80100-gcc.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + clock-controller@ade0000 { + compatible = "qcom,x1e80100-camcc"; + reg = <0xade0000 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml index 5951a60ab081..28797d0c5d8d 100644 --- a/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml @@ -17,7 +17,11 @@ description: | properties: compatible: - const: qcom,x1e80100-gcc + oneOf: + - items: + - const: qcom,x1p42100-gcc + - const: qcom,x1e80100-gcc + - const: qcom,x1e80100-gcc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml index 42b6f80613f3..162d38035188 100644 --- a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml @@ -31,6 +31,7 @@ description: | properties: compatible: enum: + - renesas,5l35023 - renesas,5p35023 reg: diff --git a/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml index 926c503bed1f..c3fe76abd549 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml @@ -4,19 +4,22 @@ $id: http://devicetree.org/schemas/clock/renesas,rzv2h-cpg.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Renesas RZ/V2H(P) Clock Pulse Generator (CPG) +title: Renesas RZ/{G3E,V2H(P)} Clock Pulse Generator (CPG) maintainers: - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> description: - On Renesas RZ/V2H(P) SoCs, the CPG (Clock Pulse Generator) handles generation - and control of clock signals for the IP modules, generation and control of resets, - and control over booting, low power consumption and power supply domains. + On Renesas RZ/{G3E,V2H(P)} SoCs, the CPG (Clock Pulse Generator) handles + generation and control of clock signals for the IP modules, generation and + control of resets, and control over booting, low power consumption and power + supply domains. properties: compatible: - const: renesas,r9a09g057-cpg + enum: + - renesas,r9a09g047-cpg # RZ/G3E + - renesas,r9a09g057-cpg # RZ/V2H reg: maxItems: 1 @@ -37,7 +40,7 @@ properties: description: | - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" and a core clock reference, as defined in - <dt-bindings/clock/renesas,r9a09g057-cpg.h>, + <dt-bindings/clock/renesas,r9a09g0*-cpg.h>, - For module clocks, the two clock specifier cells must be "CPG_MOD" and a module number. The module number is calculated as the CLKON register offset index multiplied by 16, plus the actual bit in the register diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos990-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos990-clock.yaml new file mode 100644 index 000000000000..9e7944b5f13b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos990-clock.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos990-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos990 SoC clock controller + +maintainers: + - Igor Belwon <igor.belwon@mentallysanemainliners.org> + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + Exynos990 clock controller is comprised of several CMU units, generating + clocks for different domains. Those CMU units are modeled as separate device + tree nodes, and might depend on each other. The root clock in that root tree + is an external clock: OSCCLK (26 MHz). This external clock must be defined + as a fixed-rate clock in dts. + + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and + dividers; all other clocks of function blocks (other CMUs) are usually + derived from CMU_TOP. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All clocks available for usage + in clock consumer nodes are defined as preprocessor macros in + 'include/dt-bindings/clock/samsung,exynos990.h' header. + +properties: + compatible: + enum: + - samsung,exynos990-cmu-hsi0 + - samsung,exynos990-cmu-top + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - "#clock-cells" + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos990-cmu-hsi0 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_HSI0 BUS clock (from CMU_TOP) + - description: CMU_HSI0 USB31DRD clock (from CMU_TOP) + - description: CMU_HSI0 USBDP_DEBUG clock (from CMU_TOP) + - description: CMU_HSI0 DPGTC clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: bus + - const: usb31drd + - const: usbdp_debug + - const: dpgtc + + - if: + properties: + compatible: + contains: + const: samsung,exynos990-cmu-top + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + + clock-names: + items: + - const: oscclk + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/samsung,exynos990.h> + + cmu_hsi0: clock-controller@10a00000 { + compatible = "samsung,exynos990-cmu-hsi0"; + reg = <0x10a00000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, + <&cmu_top CLK_DOUT_CMU_HSI0_BUS>, + <&cmu_top CLK_DOUT_CMU_HSI0_USB31DRD>, + <&cmu_top CLK_DOUT_CMU_HSI0_USBDP_DEBUG>, + <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>; + clock-names = "oscclk", + "bus", + "usb31drd", + "usbdp_debug", + "dpgtc"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt deleted file mode 100644 index cfa04b614d8a..000000000000 --- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt +++ /dev/null @@ -1,138 +0,0 @@ -STMicroelectronics STM32 Reset and Clock Controller -=================================================== - -The RCC IP is both a reset and a clock controller. - -Please refer to clock-bindings.txt for common clock controller binding usage. -Please also refer to reset.txt for common reset controller binding usage. - -Required properties: -- compatible: Should be: - "st,stm32f42xx-rcc" - "st,stm32f469-rcc" - "st,stm32f746-rcc" - "st,stm32f769-rcc" - -- reg: should be register base and length as documented in the - datasheet -- #reset-cells: 1, see below -- #clock-cells: 2, device nodes should specify the clock in their "clocks" - property, containing a phandle to the clock device node, an index selecting - between gated clocks and other clocks and an index specifying the clock to - use. -- clocks: External oscillator clock phandle - - high speed external clock signal (HSE) - - external I2S clock (I2S_CKIN) - -Example: - - rcc: rcc@40023800 { - #reset-cells = <1>; - #clock-cells = <2> - compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; - reg = <0x40023800 0x400>; - clocks = <&clk_hse>, <&clk_i2s_ckin>; - }; - -Specifying gated clocks -======================= - -The primary index must be set to 0. - -The secondary index is the bit number within the RCC register bank, starting -from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30). - -It is calculated as: index = register_offset / 4 * 32 + bit_offset. -Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31). - -To simplify the usage and to share bit definition with the reset and clock -drivers of the RCC IP, macros are available to generate the index in -human-readble format. - -For STM32F4 series, the macro are available here: - - include/dt-bindings/mfd/stm32f4-rcc.h - -Example: - - /* Gated clock, AHB1 bit 0 (GPIOA) */ - ... { - clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)> - }; - - /* Gated clock, AHB2 bit 4 (CRYP) */ - ... { - clocks = <&rcc 0 STM32F4_AHB2_CLOCK(CRYP)> - }; - -Specifying other clocks -======================= - -The primary index must be set to 1. - -The secondary index is bound with the following magic numbers: - - 0 SYSTICK - 1 FCLK - 2 CLK_LSI (low-power clock source) - 3 CLK_LSE (generated from a 32.768 kHz low-speed external - crystal or ceramic resonator) - 4 CLK_HSE_RTC (HSE division factor for RTC clock) - 5 CLK_RTC (real-time clock) - 6 PLL_VCO_I2S (vco frequency of I2S pll) - 7 PLL_VCO_SAI (vco frequency of SAI pll) - 8 CLK_LCD (LCD-TFT) - 9 CLK_I2S (I2S clocks) - 10 CLK_SAI1 (audio clocks) - 11 CLK_SAI2 - 12 CLK_I2SQ_PDIV (post divisor of pll i2s q divisor) - 13 CLK_SAIQ_PDIV (post divisor of pll sai q divisor) - - 14 CLK_HSI (Internal ocscillator clock) - 15 CLK_SYSCLK (System Clock) - 16 CLK_HDMI_CEC (HDMI-CEC clock) - 17 CLK_SPDIF (SPDIF-Rx clock) - 18 CLK_USART1 (U(s)arts clocks) - 19 CLK_USART2 - 20 CLK_USART3 - 21 CLK_UART4 - 22 CLK_UART5 - 23 CLK_USART6 - 24 CLK_UART7 - 25 CLK_UART8 - 26 CLK_I2C1 (I2S clocks) - 27 CLK_I2C2 - 28 CLK_I2C3 - 29 CLK_I2C4 - 30 CLK_LPTIMER (LPTimer1 clock) - 31 CLK_PLL_SRC - 32 CLK_DFSDM1 - 33 CLK_ADFSDM1 - 34 CLK_F769_DSI -) - -Example: - - /* Misc clock, FCLK */ - ... { - clocks = <&rcc 1 STM32F4_APB1_CLOCK(TIM2)> - }; - - -Specifying softreset control of devices -======================================= - -Device nodes should specify the reset channel required in their "resets" -property, containing a phandle to the reset device node and an index specifying -which channel to use. -The index is the bit number within the RCC registers bank, starting from RCC -base address. -It is calculated as: index = register_offset / 4 * 32 + bit_offset. -Where bit_offset is the bit offset within the register. -For example, for CRC reset: - crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140 - -example: - - timer2 { - resets = <&rcc STM32F4_APB1_RESET(TIM2)>; - }; diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32-rcc.yaml new file mode 100644 index 000000000000..f83a6120d65a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/st,stm32-rcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Reset Clock Controller + +maintainers: + - Dario Binacchi <dario.binacchi@amarulasolutions.com> + +description: | + The RCC IP is both a reset and a clock controller. + The reset phandle argument is the bit number within the RCC registers bank, + starting from RCC base address. + +properties: + compatible: + oneOf: + - items: + - enum: + - st,stm32f42xx-rcc + - st,stm32f746-rcc + - st,stm32h743-rcc + - const: st,stm32-rcc + - items: + - enum: + - st,stm32f469-rcc + - const: st,stm32f42xx-rcc + - const: st,stm32-rcc + - items: + - enum: + - st,stm32f769-rcc + - const: st,stm32f746-rcc + - const: st,stm32-rcc + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + + '#clock-cells': + enum: [1, 2] + + clocks: + minItems: 2 + maxItems: 3 + + st,syscfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to system configuration controller. It can be used to control the + power domain circuitry. + + st,ssc-modfreq-hz: + description: + The modulation frequency for main PLL (in Hz) + + st,ssc-moddepth-permyriad: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The modulation rate for main PLL (in permyriad, i.e. 0.01%) + minimum: 25 + maximum: 200 + + st,ssc-modmethod: + $ref: /schemas/types.yaml#/definitions/string + description: + The modulation techniques for main PLL. + items: + enum: + - center-spread + - down-spread + +required: + - compatible + - reg + - '#reset-cells' + - '#clock-cells' + - clocks + - st,syscfg + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32h743-rcc + then: + properties: + '#clock-cells': + const: 1 + description: | + The clock index for the specified type. + clocks: + items: + - description: high speed external (HSE) clock input + - description: low speed external (LSE) clock input + - description: Inter-IC sound (I2S) clock input + st,ssc-modfreq-hz: false + st,ssc-moddepth-permyriad: false + st,ssc-modmethod: false + + else: + properties: + '#clock-cells': + const: 2 + description: | + - The first cell is the clock type, possible values are 0 for + gated clocks and 1 otherwise. + - The second cell is the clock index for the specified type. + clocks: + items: + - description: high speed external (HSE) clock input + - description: Inter-IC sound (I2S) clock input + +additionalProperties: false + +examples: + # Reset and Clock Control Module node: + - | + clock-controller@40023800 { + compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; + reg = <0x40023800 0x400>; + #clock-cells = <2>; + #reset-cells = <1>; + clocks = <&clk_hse>, <&clk_i2s_ckin>; + st,syscfg = <&pwrcfg>; + st,ssc-modfreq-hz = <10000>; + st,ssc-moddepth-permyriad = <200>; + st,ssc-modmethod = "center-spread"; + }; + - | + clock-controller@58024400 { + compatible = "st,stm32h743-rcc", "st,stm32-rcc"; + reg = <0x58024400 0x400>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>; + st,syscfg = <&pwrcfg>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml index 9b3aaae546cb..e72f46e79b90 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml +++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml @@ -21,7 +21,7 @@ description: | ================= All available clocks are defined as preprocessor macros in - dt-bindings/clock/stm32mp1-clks.h header and can be used in device + include/dt-bindings/clock/stm32mp1-clks.h header and can be used in device tree sources. Specifying softreset control of devices @@ -40,8 +40,8 @@ description: | = 0x180 / 4 * 32 + 0 = 3072 The list of valid indices for STM32MP1 is available in: - include/dt-bindings/reset-controller/stm32mp1-resets.h - include/dt-bindings/reset-controller/stm32mp13-resets.h + include/dt-bindings/reset/stm32mp1-resets.h + include/dt-bindings/reset/stm32mp13-resets.h This file implements defines like: #define LTDC_R 3072 diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt deleted file mode 100644 index 238e6f7d74f8..000000000000 --- a/Documentation/devicetree/bindings/clock/ti/composite.txt +++ /dev/null @@ -1,55 +0,0 @@ -Binding for TI composite clock. - -This binding uses the common clock binding[1]. It assumes a -register-mapped composite clock with multiple different sub-types; - -a multiplexer clock with multiple input clock signals or parents, one -of which can be selected as output, this behaves exactly as [2] - -an adjustable clock rate divider, this behaves exactly as [3] - -a gating function which can be used to enable and disable the output -clock, this behaves exactly as [4] - -The binding must provide a list of the component clocks that shall be -merged to this clock. The component clocks shall be of one of the -"ti,*composite*-clock" types. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml -[3] Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml -[4] Documentation/devicetree/bindings/clock/ti/gate.txt - -Required properties: -- compatible : shall be: "ti,composite-clock" -- clocks : link phandles of component clocks -- #clock-cells : from common clock binding; shall be set to 0. - -Optional properties: -- clock-output-names : from common clock binding. - -Examples: - -usb_l4_gate_ick: usb_l4_gate_ick { - #clock-cells = <0>; - compatible = "ti,composite-interface-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <5>; - reg = <0x0a10>; -}; - -usb_l4_div_ick: usb_l4_div_ick { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <4>; - ti,max-div = <1>; - reg = <0x0a40>; - ti,index-starts-at-one; -}; - -usb_l4_ick: usb_l4_ick { - #clock-cells = <0>; - compatible = "ti,composite-clock"; - clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; -}; diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt deleted file mode 100644 index a8e0335b006a..000000000000 --- a/Documentation/devicetree/bindings/clock/ti/gate.txt +++ /dev/null @@ -1,105 +0,0 @@ -Binding for Texas Instruments gate clock. - -This binding uses the common clock binding[1]. This clock is -quite much similar to the basic gate-clock [2], however, -it supports a number of additional features. If no register -is provided for this clock, the code assumes that a clockdomain -will be controlled instead and the corresponding hw-ops for -that is used. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml -[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt - -Required properties: -- compatible : shall be one of: - "ti,gate-clock" - basic gate clock - "ti,wait-gate-clock" - gate clock which waits until clock is active before - returning from clk_enable() - "ti,dss-gate-clock" - gate clock with DSS specific hardware handling - "ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling - "ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional - clock directly from a clockdomain, see [3] how - to map clockdomains properly - "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling, - required for a hardware errata - "ti,composite-gate-clock" - composite gate clock, to be part of composite - clock - "ti,composite-no-wait-gate-clock" - composite gate clock that does not wait - for clock to be active before returning - from clk_enable() -- #clock-cells : from common clock binding; shall be set to 0 -- clocks : link to phandle of parent clock -- reg : offset for register controlling adjustable gate, not needed for - ti,clkdm-gate-clock type - -Optional properties: -- clock-output-names : from common clock binding. -- ti,bit-shift : bit shift for programming the clock gate, invalid for - ti,clkdm-gate-clock type -- ti,set-bit-to-disable : inverts default gate programming. Setting the bit - gates the clock and clearing the bit ungates the clock. - -Examples: - mmchs2_fck: mmchs2_fck@48004a00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <25>; - }; - - uart4_fck_am35xx: uart4_fck_am35xx { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <23>; - }; - - dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 { - #clock-cells = <0>; - compatible = "ti,dss-gate-clock"; - clocks = <&dpll4_m4x2_ck>; - reg = <0x0e00>; - ti,bit-shift = <0>; - }; - - emac_ick: emac_ick@4800259c { - #clock-cells = <0>; - compatible = "ti,am35xx-gate-clock"; - clocks = <&ipss_ick>; - reg = <0x059c>; - ti,bit-shift = <1>; - }; - - emu_src_ck: emu_src_ck { - #clock-cells = <0>; - compatible = "ti,clkdm-gate-clock"; - clocks = <&emu_src_mux_ck>; - }; - - dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 { - #clock-cells = <0>; - compatible = "ti,hsdiv-gate-clock"; - clocks = <&dpll4_m2x2_mul_ck>; - ti,bit-shift = <0x1b>; - reg = <0x0d00>; - ti,set-bit-to-disable; - }; - - vlynq_gate_fck: vlynq_gate_fck { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&core_ck>; - ti,bit-shift = <3>; - reg = <0x0200>; - }; - - sys_clkout2_src_gate: sys_clkout2_src_gate { - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clocks = <&core_ck>; - ti,bit-shift = <15>; - reg = <0x0070>; - }; diff --git a/Documentation/devicetree/bindings/clock/ti/ti,composite-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,composite-clock.yaml new file mode 100644 index 000000000000..31a6794852c7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/ti,composite-clock.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti/ti,composite-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments composite clock + +maintainers: + - Tero Kristo <kristo@kernel.org> + +description: | + *Deprecated design pattern: one node per clock* + + This binding assumes a register-mapped composite clock with multiple + different sub-types: + + a multiplexer clock with multiple input clock signals or parents, one + of which can be selected as output, this behaves exactly as [1]. + + an adjustable clock rate divider, this behaves exactly as [2]. + + a gating function which can be used to enable and disable the output + clock, this behaves exactly as [3]. + + The binding must provide a list of the component clocks that shall be + merged to this clock. The component clocks shall be of one of the + "ti,*composite*-clock" types. + + [1] Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml + [2] Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml + [3] Documentation/devicetree/bindings/clock/ti/ti,gate-clock.yaml + +properties: + compatible: + const: ti,composite-clock + + "#clock-cells": + const: 0 + + clocks: true + + clock-output-names: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - clocks + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <1>; + #size-cells = <0>; + + usb_l4_gate_ick: clock-controller@a10 { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&l4_ick>; + ti,bit-shift = <5>; + reg = <0x0a10>; + }; + + usb_l4_div_ick: clock-controller@a40 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&l4_ick>; + ti,bit-shift = <4>; + ti,max-div = <1>; + reg = <0x0a40>; + ti,index-starts-at-one; + }; + }; + + clock-controller { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti/ti,gate-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,gate-clock.yaml new file mode 100644 index 000000000000..eaa727ab0d7f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/ti,gate-clock.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti/ti,gate-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments gate clock + +maintainers: + - Tero Kristo <kristo@kernel.org> + +description: | + *Deprecated design pattern: one node per clock* + + This clock is quite much similar to the basic gate-clock [1], however, + it supports a number of additional features. If no register + is provided for this clock, the code assumes that a clockdomain + will be controlled instead and the corresponding hw-ops for + that is used. + + [1] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml + [2] Documentation/devicetree/bindings/clock/ti/clockdomain.txt + +properties: + compatible: + enum: + - ti,gate-clock # basic gate clock + - ti,wait-gate-clock # gate clock which waits until clock is + # active before returning from clk_enable() + - ti,dss-gate-clock # gate clock with DSS specific hardware + # handling + - ti,am35xx-gate-clock # gate clock with AM35xx specific hardware + # handling + - ti,clkdm-gate-clock # clockdomain gate clock, which derives its + # functional clock directly from a + # clockdomain, see [2] how to map + # clockdomains properly + - ti,hsdiv-gate-clock # gate clock with OMAP36xx specific hardware + # handling, required for a hardware errata + - ti,composite-gate-clock # composite gate clock, to be part of + # composite clock + - ti,composite-no-wait-gate-clock # composite gate clock that does not + # wait for clock to be active before + # returning from clk_enable() + "#clock-cells": + const: 0 + + clocks: true + + clock-output-names: + maxItems: 1 + + reg: + maxItems: 1 + + ti,bit-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of bits to shift the bit-mask + maximum: 31 + default: 0 + + ti,set-bit-to-disable: + type: boolean + description: + Inverts default gate programming. Setting the bit + gates the clock and clearing the bit ungates the clock. + + ti,set-rate-parent: + type: boolean + description: + clk_set_rate is propagated to parent clock, + +if: + properties: + compatible: + contains: + const: ti,clkdm-gate-clock +then: + properties: + reg: false + required: + - compatible + - "#clock-cells" + - clocks +else: + required: + - compatible + - "#clock-cells" + - clocks + - reg + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <1>; + #size-cells = <0>; + + clock-controller@a00 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&core_96m_fck>; + reg = <0x0a00>; + ti,bit-shift = <25>; + }; + + clock-controller@d00 { + compatible = "ti,hsdiv-gate-clock"; + reg = <0x0d00>; + #clock-cells = <0>; + clocks = <&dpll4_m2x2_mul_ck>; + ti,bit-shift = <0x1b>; + ti,set-bit-to-disable; + }; + }; + + - | + clock-controller { + #clock-cells = <0>; + compatible = "ti,clkdm-gate-clock"; + clocks = <&emu_src_mux_ck>; + }; + diff --git a/Documentation/devicetree/bindings/clock/xlnx,vcu.yaml b/Documentation/devicetree/bindings/clock/xlnx,vcu.yaml new file mode 100644 index 000000000000..19dc923e2ee9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/xlnx,vcu.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/xlnx,vcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# +title: LogicoreIP designed compatible with Xilinx ZYNQ family. + +maintainers: + - Rohit Visavalia <rohit.visavalia@amd.com> + +description: + LogicoreIP design to provide the isolation between processing system + and programmable logic. Also provides the list of register set to configure + the frequency. + +properties: + compatible: + items: + - enum: + - xlnx,vcu + - xlnx,vcu-logicoreip-1.0 + + reg: + maxItems: 1 + + clocks: + items: + - description: pll ref clocksource + - description: aclk + + clock-names: + items: + - const: pll_ref + - const: aclk + + reset-gpios: + maxItems: 1 + +required: + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + fpga { + #address-cells = <2>; + #size-cells = <2>; + xlnx_vcu: vcu@a0040000 { + compatible = "xlnx,vcu-logicoreip-1.0"; + reg = <0x0 0xa0040000 0x0 0x1000>; + reset-gpios = <&gpio 78 GPIO_ACTIVE_HIGH>; + clocks = <&si570_1>, <&clkc 71>; + clock-names = "pll_ref", "aclk"; + }; + }; diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 67700440e23b..11e40d225b9f 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -293,6 +293,13 @@ properties: PD negotiation till BC1.2 detection completes. default: 0 + pd-revision: + description: Specifies the maximum USB PD revision and version supported by + the connector. This property is specified in the following order; + <revision_major, revision_minor, version_major, version_minor>. + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 4 + dependencies: sink-vdos-v1: [ sink-vdos ] sink-vdos: [ sink-vdos-v1 ] diff --git a/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml new file mode 100644 index 000000000000..7d4510b3219c --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cpufreq/airoha,en7581-cpufreq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Airoha EN7581 CPUFreq + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +description: | + On newer Airoha SoC, CPU Frequency is scaled indirectly with SMC commands + to ATF. + + A virtual clock is exposed. This virtual clock is a get-only clock and + is used to expose the current global CPU clock. The frequency info comes + by the output of the SMC command that reports the clock in MHz. + + The SMC sets the CPU clock by providing an index, this is modelled as + performance states in a power domain. + + CPUs can't be individually scaled as the CPU frequency is shared across + all CPUs and is global. + +properties: + compatible: + const: airoha,en7581-cpufreq + + '#clock-cells': + const: 0 + + '#power-domain-cells': + const: 0 + + operating-points-v2: true + +required: + - compatible + - '#clock-cells' + - '#power-domain-cells' + - operating-points-v2 + +additionalProperties: false + +examples: + - | + performance-domain { + compatible = "airoha,en7581-cpufreq"; + + operating-points-v2 = <&cpu_smcc_opp_table>; + + #power-domain-cells = <0>; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml index 76cb9726660e..896276b8c6bb 100644 --- a/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml +++ b/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml @@ -24,9 +24,17 @@ properties: - apple,t8112-cluster-cpufreq - const: apple,cluster-cpufreq - items: - - const: apple,t6000-cluster-cpufreq + - enum: + - apple,s8000-cluster-cpufreq + - apple,t8010-cluster-cpufreq + - apple,t8015-cluster-cpufreq + - apple,t6000-cluster-cpufreq - const: apple,t8103-cluster-cpufreq - const: apple,cluster-cpufreq + - items: + - const: apple,t7000-cluster-cpufreq + - const: apple,s5l8960x-cluster-cpufreq + - const: apple,s5l8960x-cluster-cpufreq reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml index 9c8c9991f29a..f0c4a7c83568 100644 --- a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml +++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml @@ -114,8 +114,9 @@ patternProperties: table that specifies the PPID to LIODN mapping. Needed if the PAMU is used. Value is a 12 bit value where value is a LIODN ID for this JR. This property is normally set by boot firmware. - $ref: /schemas/types.yaml#/definitions/uint32 - maximum: 0xfff + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - maximum: 0xfff '^rtic@[0-9a-f]+$': type: object @@ -186,8 +187,9 @@ patternProperties: Needed if the PAMU is used. Value is a 12 bit value where value is a LIODN ID for this JR. This property is normally set by boot firmware. - $ref: /schemas/types.yaml#/definitions/uint32 - maximum: 0xfff + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - maximum: 0xfff fsl,rtic-region: description: diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml index 0304f074cf08..08fe6a707a37 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -13,12 +13,14 @@ properties: compatible: items: - enum: + - qcom,qcs8300-inline-crypto-engine - qcom,sa8775p-inline-crypto-engine - qcom,sc7180-inline-crypto-engine - qcom,sc7280-inline-crypto-engine - qcom,sm8450-inline-crypto-engine - qcom,sm8550-inline-crypto-engine - qcom,sm8650-inline-crypto-engine + - qcom,sm8750-inline-crypto-engine - const: qcom,inline-crypto-engine reg: diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml index 048b769a73c0..5e6f8b642545 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml @@ -17,12 +17,17 @@ properties: - qcom,prng-ee # 8996 and later using EE - items: - enum: + - qcom,ipq5332-trng + - qcom,ipq5424-trng + - qcom,ipq9574-trng + - qcom,qcs8300-trng - qcom,sa8255p-trng - qcom,sa8775p-trng - qcom,sc7280-trng - qcom,sm8450-trng - qcom,sm8550-trng - qcom,sm8650-trng + - qcom,sm8750-trng - const: qcom,trng reg: diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml index c09be97434ac..3ed56d9d378e 100644 --- a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm crypto engine driver maintainers: - - Bhupesh Sharma <bhupesh.sharma@linaro.org> + - Bjorn Andersson <andersson@kernel.org> + - Konrad Dybcio <konradybcio@kernel.org> description: This document defines the binding for the QCE crypto @@ -44,6 +45,7 @@ properties: - items: - enum: + - qcom,qcs8300-qce - qcom,sa8775p-qce - qcom,sc7280-qce - qcom,sm6350-qce @@ -52,6 +54,7 @@ properties: - qcom,sm8450-qce - qcom,sm8550-qce - qcom,sm8650-qce + - qcom,sm8750-qce - const: qcom,sm8150-qce - const: qcom,qce diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml index 84d68b8cfccc..416fe263ac92 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml @@ -148,10 +148,10 @@ examples: /* TMDS Output */ hdmi_tx_tmds_port: port@1 { - reg = <1>; + reg = <1>; - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; }; }; diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml index 5b35adf34c7b..6d11f5955b51 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml @@ -14,6 +14,8 @@ properties: enum: - brcm,bcm2711-hdmi0 - brcm,bcm2711-hdmi1 + - brcm,bcm2712-hdmi0 + - brcm,bcm2712-hdmi1 reg: items: diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml index 2e8566f47e63..f91c9dce2a44 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml @@ -13,6 +13,7 @@ properties: compatible: enum: - brcm,bcm2711-hvs + - brcm,bcm2712-hvs - brcm,bcm2835-hvs reg: @@ -36,7 +37,9 @@ if: properties: compatible: contains: - const: brcm,bcm2711-hvs + enum: + - brcm,bcm2711-hvs + - brcm,bcm2712-hvs then: required: diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml index 4e1ba03f6477..6b5b1d3fbc0b 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml @@ -20,6 +20,9 @@ properties: - brcm,bcm2711-pixelvalve2 - brcm,bcm2711-pixelvalve3 - brcm,bcm2711-pixelvalve4 + - brcm,bcm2712-pixelvalve0 + - brcm,bcm2712-pixelvalve1 + - brcm,bcm2712-pixelvalve2 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml index bb186197e471..16f45afd2bad 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml @@ -11,7 +11,10 @@ maintainers: properties: compatible: - const: brcm,bcm2835-txp + enum: + - brcm,bcm2712-mop + - brcm,bcm2712-moplet + - brcm,bcm2835-txp reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml index 49a5e041aa49..2aa9d5d2afff 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml @@ -18,6 +18,7 @@ properties: compatible: enum: - brcm,bcm2711-vc5 + - brcm,bcm2712-vc6 - brcm,bcm2835-vc4 - brcm,cygnus-vc4 diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml index df20a3c9c744..ec89115c74e4 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml @@ -90,7 +90,7 @@ properties: adi,dsi-lanes: description: Number of DSI data lanes connected to the DSI host. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 1, 2, 3, 4 ] + enum: [ 2, 3, 4 ] "#sound-dai-cells": const: 0 diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml index 3791c9f4ebab..05442d437755 100644 --- a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml @@ -82,21 +82,21 @@ examples: power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>; reg-io-width = <1>; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - - hdmi_tx_from_pvi: endpoint { - remote-endpoint = <&pvi_to_hdmi_tx>; - }; - }; - - port@1 { - reg = <1>; - hdmi_tx_out: endpoint { - remote-endpoint = <&hdmi0_con>; - }; - }; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&pvi_to_hdmi_tx>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml index d33026f85e19..c167795c63f6 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml @@ -19,6 +19,7 @@ properties: enum: - renesas,r8a779a0-dsi-csi2-tx # for V3U - renesas,r8a779g0-dsi-csi2-tx # for V4H + - renesas,r8a779h0-dsi-csi2-tx # for V4M reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml index 4ed7a799ba26..1acad99f3965 100644 --- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml +++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml @@ -27,7 +27,9 @@ properties: - fsl,imx8mm-mipi-dsim - fsl,imx8mp-mipi-dsim - items: - - const: fsl,imx8mn-mipi-dsim + - enum: + - fsl,imx7d-mipi-dsim + - fsl,imx8mn-mipi-dsim - const: fsl,imx8mm-mipi-dsim reg: @@ -241,40 +243,40 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> dsi@13900000 { - compatible = "samsung,exynos5433-mipi-dsi"; - reg = <0x13900000 0xC0>; - interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; - phys = <&mipi_phy 1>; - phy-names = "dsim"; - clocks = <&cmu_disp CLK_PCLK_DSIM0>, - <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>, - <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>, - <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>, - <&cmu_disp CLK_SCLK_DSIM0>; - clock-names = "bus_clk", - "phyclk_mipidphy0_bitclkdiv8", - "phyclk_mipidphy0_rxclkesc0", - "sclk_rgb_vclk_to_dsim0", - "sclk_mipi"; - power-domains = <&pd_disp>; - vddcore-supply = <&ldo6_reg>; - vddio-supply = <&ldo7_reg>; - samsung,burst-clock-frequency = <512000000>; - samsung,esc-clock-frequency = <16000000>; - samsung,pll-clock-frequency = <24000000>; - pinctrl-names = "default"; - pinctrl-0 = <&te_irq>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dsi_to_mic: endpoint { - remote-endpoint = <&mic_to_dsi>; - }; - }; - }; + compatible = "samsung,exynos5433-mipi-dsi"; + reg = <0x13900000 0xC0>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&cmu_disp CLK_PCLK_DSIM0>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>, + <&cmu_disp CLK_SCLK_DSIM0>; + clock-names = "bus_clk", + "phyclk_mipidphy0_bitclkdiv8", + "phyclk_mipidphy0_rxclkesc0", + "sclk_rgb_vclk_to_dsim0", + "sclk_mipi"; + power-domains = <&pd_disp>; + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo7_reg>; + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; + samsung,pll-clock-frequency = <24000000>; + pinctrl-names = "default"; + pinctrl-0 = <&te_irq>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_to_mic: endpoint { + remote-endpoint = <&mic_to_dsi>; + }; + }; + }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml index 48a97bb3e2e0..bad6f5c81b06 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml @@ -80,12 +80,12 @@ properties: - const: 4 port@2: - $ref: /schemas/graph.yaml#/properties/port description: Video port for LVDS Channel-A output (panel or bridge). + $ref: '#/$defs/lvds-port' port@3: - $ref: /schemas/graph.yaml#/properties/port description: Video port for LVDS Channel-B output (panel or bridge). + $ref: '#/$defs/lvds-port' required: - port@0 @@ -96,6 +96,36 @@ required: - reg - ports +$defs: + lvds-port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + ti,lvds-termination-ohms: + description: The value of near end differential termination in ohms. + enum: [100, 200] + default: 200 + + ti,lvds-vod-swing-clock-microvolt: + description: LVDS diferential output voltage <min max> for clock + lanes in microvolts. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + + ti,lvds-vod-swing-data-microvolt: + description: LVDS diferential output voltage <min max> for data + lanes in microvolts. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml index 47ddba5c41af..5d2089dc596e 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml @@ -104,30 +104,30 @@ examples: #size-cells = <2>; aal@14015000 { - compatible = "mediatek,mt8173-disp-aal"; - reg = <0 0x14015000 0 0x1000>; - interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_AAL>; - mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - aal0_in: endpoint { - remote-endpoint = <&ccorr0_out>; - }; - }; - - port@1 { - reg = <1>; - aal0_out: endpoint { - remote-endpoint = <&gamma0_in>; - }; - }; - }; - }; + compatible = "mediatek,mt8173-disp-aal"; + reg = <0 0x14015000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_AAL>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&ccorr0_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&gamma0_in>; + }; + }; + }; + }; }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml index 2aef1eb32e11..75ce92f4a5fd 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml @@ -42,6 +42,9 @@ properties: interrupts: maxItems: 1 + '#sound-dai-cells': + const: 0 + ports: $ref: /schemas/graph.yaml#/properties/ports properties: @@ -85,7 +88,21 @@ required: - ports - max-linkrate-mhz -additionalProperties: false +allOf: + - $ref: /schemas/sound/dai-common.yaml# + - if: + not: + properties: + compatible: + contains: + enum: + - mediatek,mt8188-dp-tx + - mediatek,mt8195-dp-tx + then: + properties: + '#sound-dai-cells': false + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml index 9ea796a033b2..4f110635afb6 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt8173-disp-ovl - mediatek,mt8183-disp-ovl - mediatek,mt8192-disp-ovl + - mediatek,mt8195-disp-ovl - mediatek,mt8195-mdp3-ovl - items: - enum: @@ -38,14 +39,15 @@ properties: - const: mediatek,mt8173-disp-ovl - items: - enum: - - mediatek,mt8188-disp-ovl - - mediatek,mt8195-disp-ovl - - const: mediatek,mt8183-disp-ovl - - items: - - enum: - mediatek,mt8186-disp-ovl - mediatek,mt8365-disp-ovl - const: mediatek,mt8192-disp-ovl + - items: + - const: mediatek,mt8188-disp-ovl + - const: mediatek,mt8195-disp-ovl + - items: + - const: mediatek,mt8188-mdp3-ovl + - const: mediatek,mt8195-mdp3-ovl reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index a212f335d5ff..e00b88332f2f 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -8,6 +8,7 @@ title: MSM Display Port Controller maintainers: - Kuogee Hsieh <quic_khsieh@quicinc.com> + - Abhinav Kumar <quic_abhinavk@quicinc.com> description: | Device tree bindings for DisplayPort host controller for MSM targets diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index b0fd96b76ed1..ffbd1dc9470e 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -30,6 +30,7 @@ properties: - qcom,sdm845-dsi-ctrl - qcom,sm6115-dsi-ctrl - qcom,sm6125-dsi-ctrl + - qcom,sm6150-dsi-ctrl - qcom,sm6350-dsi-ctrl - qcom,sm6375-dsi-ctrl - qcom,sm7150-dsi-ctrl @@ -349,6 +350,7 @@ allOf: enum: - qcom,sc7180-dsi-ctrl - qcom,sc7280-dsi-ctrl + - qcom,sm6150-dsi-ctrl - qcom,sm7150-dsi-ctrl - qcom,sm8150-dsi-ctrl - qcom,sm8250-dsi-ctrl @@ -416,63 +418,63 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,dispcc-sdm845.h> - #include <dt-bindings/clock/qcom,gcc-sdm845.h> - #include <dt-bindings/power/qcom-rpmpd.h> - - dsi@ae94000 { - compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl"; - reg = <0x0ae94000 0x400>; - reg-names = "dsi_ctrl"; - - #address-cells = <1>; - #size-cells = <0>; - - interrupt-parent = <&mdss>; - interrupts = <4>; - - clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, - <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, - <&dispcc DISP_CC_MDSS_PCLK0_CLK>, - <&dispcc DISP_CC_MDSS_ESC0_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AXI_CLK>; - clock-names = "byte", - "byte_intf", - "pixel", - "core", - "iface", - "bus"; - - phys = <&dsi0_phy>; - phy-names = "dsi"; - - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>; - - power-domains = <&rpmhpd SC7180_CX>; - operating-points-v2 = <&dsi_opp_table>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&dpu_intf1_out>; - }; - }; - - port@1 { - reg = <1>; - dsi0_out: endpoint { - remote-endpoint = <&sn65dsi86_in>; - data-lanes = <0 1 2 3>; - qcom,te-source = "mdp_vsync_e"; - }; - }; - }; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + dsi@ae94000 { + compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>; + + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&dsi_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; + qcom,te-source = "mdp_vsync_e"; + }; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml index 69d13867b7cf..fc9abf090f0d 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml @@ -74,28 +74,28 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/clock/qcom,dispcc-sdm845.h> - #include <dt-bindings/clock/qcom,rpmh.h> - - dsi-phy@ae94400 { - compatible = "qcom,dsi-phy-10nm"; - reg = <0x0ae94400 0x200>, - <0x0ae94600 0x280>, - <0x0ae94a00 0x1e0>; - reg-names = "dsi_phy", - "dsi_phy_lane", - "dsi_pll"; - - #clock-cells = <1>; - #phy-cells = <0>; - - vdds-supply = <&vdda_mipi_dsi0_pll>; - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "ref"; - - qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>; - qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>; - qcom,phy-drive-ldo-level = <400>; - }; + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vdds-supply = <&vdda_mipi_dsi0_pll>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>; + qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>; + qcom,phy-drive-ldo-level = <400>; + }; ... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index 52bbe132e6da..206a9a4b3845 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -20,6 +20,7 @@ properties: - qcom,dsi-phy-14nm-660 - qcom,dsi-phy-14nm-8953 - qcom,sm6125-dsi-phy-14nm + - qcom,sm6150-dsi-phy-14nm reg: items: @@ -55,24 +56,24 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/clock/qcom,dispcc-sdm845.h> - #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> - dsi-phy@ae94400 { - compatible = "qcom,dsi-phy-14nm"; - reg = <0x0ae94400 0x200>, - <0x0ae94600 0x280>, - <0x0ae94a00 0x1e0>; - reg-names = "dsi_phy", - "dsi_phy_lane", - "dsi_pll"; + dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-14nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; - #clock-cells = <1>; - #phy-cells = <0>; + #clock-cells = <1>; + #phy-cells = <0>; - vcca-supply = <&vcca_reg>; - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "ref"; - }; + vcca-supply = <&vcca_reg>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; ... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml index 7e6687cb002b..93570052992a 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml @@ -45,26 +45,26 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/clock/qcom,dispcc-sdm845.h> - #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> - dsi-phy@fd922a00 { - compatible = "qcom,dsi-phy-20nm"; - reg = <0xfd922a00 0xd4>, - <0xfd922b00 0x2b0>, - <0xfd922d80 0x7b>; - reg-names = "dsi_pll", - "dsi_phy", - "dsi_phy_regulator"; + dsi-phy@fd922a00 { + compatible = "qcom,dsi-phy-20nm"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x2b0>, + <0xfd922d80 0x7b>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; - #clock-cells = <1>; - #phy-cells = <0>; + #clock-cells = <1>; + #phy-cells = <0>; - vcca-supply = <&vcca_reg>; - vddio-supply = <&vddio_reg>; + vcca-supply = <&vcca_reg>; + vddio-supply = <&vddio_reg>; - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "ref"; - }; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; ... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index a55c2445d189..371befa9f9d2 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -51,25 +51,25 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/clock/qcom,dispcc-sdm845.h> - #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> - dsi-phy@fd922a00 { - compatible = "qcom,dsi-phy-28nm-lp"; - reg = <0xfd922a00 0xd4>, - <0xfd922b00 0x2b0>, - <0xfd922d80 0x7b>; - reg-names = "dsi_pll", - "dsi_phy", - "dsi_phy_regulator"; + dsi-phy@fd922a00 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x2b0>, + <0xfd922d80 0x7b>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; - #clock-cells = <1>; - #phy-cells = <0>; + #clock-cells = <1>; + #phy-cells = <0>; - vddio-supply = <&vddio_reg>; + vddio-supply = <&vddio_reg>; - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "ref"; - }; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; ... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml index 7e764eac3ef3..321470435e65 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml @@ -54,23 +54,23 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/clock/qcom,dispcc-sm8250.h> - #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,dispcc-sm8250.h> + #include <dt-bindings/clock/qcom,rpmh.h> - dsi-phy@ae94400 { - compatible = "qcom,dsi-phy-7nm"; - reg = <0x0ae94400 0x200>, - <0x0ae94600 0x280>, - <0x0ae94900 0x260>; - reg-names = "dsi_phy", - "dsi_phy_lane", - "dsi_pll"; + dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; - #clock-cells = <1>; - #phy-cells = <0>; + #clock-cells = <1>; + #phy-cells = <0>; - vdds-supply = <&vreg_l5a_0p88>; - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "ref"; - }; + vdds-supply = <&vreg_l5a_0p88>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml index 58f8a01f29c7..a90a8b3f1a9e 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml @@ -78,7 +78,6 @@ examples: "mdp1-mem", "cpu-cfg"; - resets = <&dispcc_core_bcr>; power-domains = <&dispcc_gdsc>; @@ -129,7 +128,7 @@ examples: port@0 { reg = <0>; dpu_intf0_out: endpoint { - remote-endpoint = <&mdss0_dp0_in>; + remote-endpoint = <&mdss0_dp0_in>; }; }; }; @@ -168,7 +167,8 @@ examples: reg = <0xaf54000 0x104>, <0xaf54200 0x0c0>, <0xaf55000 0x770>, - <0xaf56000 0x09c>; + <0xaf56000 0x09c>, + <0xaf57000 0x09c>; interrupt-parent = <&mdss0>; interrupts = <12>; @@ -208,8 +208,8 @@ examples: }; port@1 { - reg = <1>; - mdss0_dp_out: endpoint { }; + reg = <1>; + mdss0_dp_out: endpoint { }; }; }; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-dpu.yaml new file mode 100644 index 000000000000..b4f437172218 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-dpu.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6150-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6150 Display DPU + +maintainers: + - Abhinav Kumar <quic_abhinavk@quicinc.com> + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm6150-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display ahb clock + - description: Display hf axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm6150-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc_mdss_ahb_clk>, + <&gcc_disp_hf_axi_clk>, + <&dispcc_mdss_mdp_clk>, + <&dispcc_mdss_vsync_clk>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc_mdss_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf0_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-25600000 { + opp-hz = /bits/ 64 <25600000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml new file mode 100644 index 000000000000..9ac24f99d3ad --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml @@ -0,0 +1,245 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6150-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6150 Display MDSS + +maintainers: + - Abhinav Kumar <quic_abhinavk@quicinc.com> + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SM6150 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm6150-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display hf axi clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,sm6150-dpu + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + items: + - const: qcom,sm6150-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,sm6150-dsi-phy-14nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,icc.h> + #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sm6150-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", "cpu-cfg"; + + power-domains = <&dispcc_mdss_gdsc>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&gcc_disp_hf_axi_clk>, + <&dispcc_mdss_mdp_clk>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x0>; + + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm6150-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc_mdss_ahb_clk>, + <&gcc_disp_hf_axi_clk>, + <&dispcc_mdss_mdp_clk>, + <&dispcc_mdss_vsync_clk>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc_mdss_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf0_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-25600000 { + opp-hz = /bits/ 64 <25600000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm6150-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc_mdss_byte0_clk>, + <&dispcc_mdss_byte0_intf_clk>, + <&dispcc_mdss_pclk0_clk>, + <&dispcc_mdss_esc0_clk>, + <&dispcc_mdss_ahb_clk>, + <&gcc_disp_hf_axi_clk>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc_mdss_byte0_clk_src>, + <&dispcc_mdss_pclk0_clk_src>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi0_opp_table>; + + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,sm6150-dsi-phy-14nm"; + reg = <0x0ae94400 0x100>, + <0x0ae94500 0x300>, + <0x0ae94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml index 5af2d6930075..fcb5834f799a 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml @@ -42,6 +42,8 @@ properties: # Admatec 9904379 10.1" 1024x600 LVDS panel - admatec,9904379 - auo,b101ew05 + # AUO G084SN05 V9 8.4" 800x600 LVDS panel + - auo,g084sn05 # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel - chunghwa,claa070wp03xg # EDT ETML0700Z9NDHA 7.0" WSVGA (1024x600) color TFT LCD LVDS panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 18b63f356bb4..e3ee3a332bb7 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -206,12 +206,16 @@ properties: - mitsubishi,aa070mc01-ca1 # Mitsubishi AA084XE01 8.4" XGA TFT LCD panel - mitsubishi,aa084xe01 + # Multi-Inno Technology Co.,Ltd MI0700A2T-30 7" 800x480 TFT Resistive Touch Module + - multi-inno,mi0700a2t-30 # Multi-Inno Technology Co.,Ltd MI0700S4T-6 7" 800x480 TFT Resistive Touch Module - multi-inno,mi0700s4t-6 # Multi-Inno Technology Co.,Ltd MI0800FT-9 8" 800x600 TFT Resistive Touch Module - multi-inno,mi0800ft-9 # Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod. - multi-inno,mi1010ait-1cp + # Multi-Inno Technology Co.,Ltd MI1010Z1T-1CP11 10.1" 1024x600 TFT Resistive Touch Module + - multi-inno,mi1010z1t-1cp11 # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel - nec,nl12880bc20-05 # NEC LCD Technologies,Ltd. WQVGA TFT LCD panel @@ -280,10 +284,14 @@ properties: - team-source-display,tst043015cmhx # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel - tianma,tm070jdhg30 + # Tianma Micro-electronics TM070JDHG34-00 7.0" WXGA (1280x800) LVDS TFT LCD panel + - tianma,tm070jdhg34-00 # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel - tianma,tm070jvhg33 # Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel - tianma,tm070rvhg71 + # Topland TIAN-G07017-01 7.0" WSVGA TFT-LCD panel with capacitive touch + - topland,tian-g07017-01 # Toshiba 8.9" WXGA (1280x768) TFT LCD panel - toshiba,lt089ac29000 # TPK U.S.A. LLC Fusion 7" 800 x 480 (WVGA) LCD panel with capacitive touch diff --git a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml index 032f783eefc4..684c2896d238 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml @@ -23,6 +23,8 @@ properties: - samsung,atna45af01 # Samsung 14.5" 3K (2944x1840 pixels) eDP AMOLED panel - samsung,atna45dc02 + # Samsung 15.6" 3K (2880x1620 pixels) eDP AMOLED panel + - samsung,atna56ac03 - const: samsung,atna33xc20 enable-gpios: true diff --git a/Documentation/devicetree/bindings/display/renesas,cmm.yaml b/Documentation/devicetree/bindings/display/renesas,cmm.yaml index 561efaaa5a91..fc4933c343cd 100644 --- a/Documentation/devicetree/bindings/display/renesas,cmm.yaml +++ b/Documentation/devicetree/bindings/display/renesas,cmm.yaml @@ -58,10 +58,10 @@ examples: #include <dt-bindings/power/r8a7796-sysc.h> cmm0: cmm@fea40000 { - compatible = "renesas,r8a7796-cmm", - "renesas,rcar-gen3-cmm"; - reg = <0xfea40000 0x1000>; - power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - clocks = <&cpg CPG_MOD 711>; - resets = <&cpg 711>; + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0xfea40000 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; }; diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml index c5b9e6812bce..3880b4c2ea9a 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml @@ -41,6 +41,7 @@ properties: - renesas,du-r8a77995 # for R-Car D3 compatible DU - renesas,du-r8a779a0 # for R-Car V3U compatible DU - renesas,du-r8a779g0 # for R-Car V4H compatible DU + - renesas,du-r8a779h0 # for R-Car V4M compatible DU reg: maxItems: 1 @@ -69,14 +70,12 @@ properties: $ref: /schemas/graph.yaml#/properties/port unevaluatedProperties: false - required: - - port@0 - - port@1 - unevaluatedProperties: false renesas,cmms: $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 4 items: maxItems: 1 description: @@ -85,6 +84,8 @@ properties: renesas,vsps: $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 4 items: items: - description: phandle to VSP instance that serves the DU channel @@ -489,9 +490,11 @@ allOf: renesas,cmms: minItems: 4 + maxItems: 4 renesas,vsps: minItems: 4 + maxItems: 4 required: - clock-names @@ -558,9 +561,11 @@ allOf: renesas,cmms: minItems: 3 + maxItems: 3 renesas,vsps: minItems: 3 + maxItems: 3 required: - clock-names @@ -627,9 +632,11 @@ allOf: renesas,cmms: minItems: 3 + maxItems: 3 renesas,vsps: minItems: 3 + maxItems: 3 required: - clock-names @@ -683,7 +690,7 @@ allOf: - port@1 renesas,vsps: - minItems: 1 + maxItems: 1 required: - clock-names @@ -746,9 +753,11 @@ allOf: renesas,cmms: minItems: 2 + maxItems: 2 renesas,vsps: minItems: 2 + maxItems: 2 required: - clock-names @@ -799,6 +808,54 @@ allOf: renesas,vsps: minItems: 2 + maxItems: 2 + + required: + - clock-names + - interrupts + - resets + - reset-names + - renesas,vsps + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a779h0 + then: + properties: + clocks: + items: + - description: Functional clock + + clock-names: + items: + - const: du.0 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DSI 0 + port@1: false + port@2: false + port@3: false + + required: + - port@0 + + renesas,vsps: + maxItems: 1 required: - clock-names diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml new file mode 100644 index 000000000000..53384e47b507 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip specific extensions to the Synopsys Designware MIPI DSI2 + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3588-mipi-dsi2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: pclk + - const: sys + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + This SoC uses GRF regs to switch between vopl/vopb. + + phys: + maxItems: 1 + + phy-names: + const: dcphy + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: apb + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input node to receive pixel data. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI output node to panel. + + required: + - port@0 + - port@1 + +required: + - compatible + - clocks + - clock-names + - rockchip,grf + - phys + - phy-names + - ports + - reg + +allOf: + - $ref: /schemas/display/dsi-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rockchip,rk3588-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/power/rk3588-power.h> + #include <dt-bindings/reset/rockchip,rk3588-cru.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + dsi@fde20000 { + compatible = "rockchip,rk3588-mipi-dsi2"; + reg = <0x0 0xfde20000 0x0 0x10000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>; + clock-names = "pclk", "sys"; + resets = <&cru SRST_P_DSIHOST0>; + reset-names = "apb"; + power-domains = <&power RK3588_PD_VOP>; + phys = <&mipidcphy0 PHY_TYPE_DPHY>; + phy-names = "dcphy"; + rockchip,grf = <&vop_grf>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + dsi0_in: port@0 { + reg = <0>; + }; + + dsi0_out: port@1 { + reg = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml index 554f9d5809d4..6b754d4f260e 100644 --- a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml +++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml @@ -100,12 +100,16 @@ properties: - description: Video layer, plane 1 (U/V or U) - description: Video layer, plane 2 (V) - description: Graphics layer + - description: Audio channel 0 + - description: Audio channel 1 dma-names: items: - const: vid0 - const: vid1 - const: vid2 - const: gfx0 + - const: aud0 + - const: aud1 phys: description: PHYs for the DP data lanes @@ -194,11 +198,13 @@ examples: power-domains = <&pd_dp>; resets = <&reset ZYNQMP_RESET_DP>; - dma-names = "vid0", "vid1", "vid2", "gfx0"; + dma-names = "vid0", "vid1", "vid2", "gfx0", "aud0", "aud1"; dmas = <&xlnx_dpdma 0>, <&xlnx_dpdma 1>, <&xlnx_dpdma 2>, - <&xlnx_dpdma 3>; + <&xlnx_dpdma 3>, + <&xlnx_dpdma 4>, + <&xlnx_dpdma 5>; phys = <&psgtr 1 PHY_TYPE_DP 0 3>, <&psgtr 0 PHY_TYPE_DP 1 3>; diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt deleted file mode 100644 index cd17684aaab5..000000000000 --- a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt +++ /dev/null @@ -1,61 +0,0 @@ -Analog Devices AXI-DMAC DMA controller - -Required properties: - - compatible: Must be "adi,axi-dmac-1.00.a". - - reg: Specification for the controllers memory mapped register map. - - interrupts: Specification for the controllers interrupt. - - clocks: Phandle and specifier to the controllers AXI interface clock - - #dma-cells: Must be 1. - -Required sub-nodes: - - adi,channels: This sub-node must contain a sub-node for each DMA channel. For - the channel sub-nodes the following bindings apply. They must match the - configuration options of the peripheral as it was instantiated. - -Required properties for adi,channels sub-node: - - #size-cells: Must be 0 - - #address-cells: Must be 1 - -Required channel sub-node properties: - - reg: Which channel this node refers to. - - adi,source-bus-width, - adi,destination-bus-width: Width of the source or destination bus in bits. - - adi,source-bus-type, - adi,destination-bus-type: Type of the source or destination bus. Must be one - of the following: - 0 (AXI_DMAC_TYPE_AXI_MM): Memory mapped AXI interface - 1 (AXI_DMAC_TYPE_AXI_STREAM): Streaming AXI interface - 2 (AXI_DMAC_TYPE_AXI_FIFO): FIFO interface - -Deprecated optional channel properties: - - adi,length-width: Width of the DMA transfer length register. - - adi,cyclic: Must be set if the channel supports hardware cyclic DMA - transfers. - - adi,2d: Must be set if the channel supports hardware 2D DMA transfers. - -DMA clients connected to the AXI-DMAC DMA controller must use the format -described in the dma.txt file using a one-cell specifier. The value of the -specifier refers to the DMA channel index. - -Example: - -dma: dma@7c420000 { - compatible = "adi,axi-dmac-1.00.a"; - reg = <0x7c420000 0x10000>; - interrupts = <0 57 0>; - clocks = <&clkc 16>; - #dma-cells = <1>; - - adi,channels { - #size-cells = <0>; - #address-cells = <1>; - - dma-channel@0 { - reg = <0>; - adi,source-bus-width = <32>; - adi,source-bus-type = <ADI_AXI_DMAC_TYPE_MM_AXI>; - adi,destination-bus-width = <64>; - adi,destination-bus-type = <ADI_AXI_DMAC_TYPE_FIFO>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml b/Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml new file mode 100644 index 000000000000..63b6fb0423c2 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/adi,axi-dmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AXI-DMAC DMA controller + +description: | + FPGA-based DMA controller designed for use with high-speed converter hardware. + + http://analogdevicesinc.github.io/hdl/library/axi_dmac/index.html + +maintainers: + - Nuno Sa <nuno.sa@analog.com> + +additionalProperties: false + +properties: + compatible: + const: adi,axi-dmac-1.00.a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + "#dma-cells": + const: 1 + + adi,channels: + deprecated: true + type: object + description: + This sub-node must contain a sub-node for each DMA channel. This node is + only required for IP versions older than 4.3.a and should otherwise be + omitted. + additionalProperties: false + + properties: + "#size-cells": + const: 0 + "#address-cells": + const: 1 + + patternProperties: + "^dma-channel@[0-9a-f]+$": + type: object + description: + DMA channel properties based on HDL compile-time configuration. + additionalProperties: false + + properties: + reg: + maxItems: 1 + + adi,source-bus-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Width of the source bus in bits. + enum: [8, 16, 32, 64, 128] + + adi,destination-bus-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Width of the destination bus in bits. + enum: [8, 16, 32, 64, 128] + + adi,source-bus-type: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Type of the source bus. + + 0: Memory mapped AXI interface + 1: Streaming AXI interface + 2: FIFO interface + enum: [0, 1, 2] + + adi,destination-bus-type: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Type of the destination bus (see adi,source-bus-type). + enum: [0, 1, 2] + + adi,length-width: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: Width of the DMA transfer length register. + + adi,cyclic: + deprecated: true + type: boolean + description: + Must be set if the channel supports hardware cyclic DMA transfers. + + adi,2d: + deprecated: true + type: boolean + description: + Must be set if the channel supports hardware 2D DMA transfers. + + required: + - reg + - adi,source-bus-width + - adi,destination-bus-width + - adi,source-bus-type + - adi,destination-bus-type + + required: + - "#size-cells" + - "#address-cells" + +required: + - compatible + - reg + - interrupts + - clocks + - "#dma-cells" + +examples: + - | + dma-controller@7c420000 { + compatible = "adi,axi-dmac-1.00.a"; + reg = <0x7c420000 0x10000>; + interrupts = <0 57 0>; + clocks = <&clkc 16>; + #dma-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml index 02d5bd035409..9b5180c0a7c4 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml @@ -22,7 +22,9 @@ properties: number. compatible: - const: allwinner,sun4i-a10-dma + enum: + - allwinner,sun4i-a10-dma + - allwinner,suniv-f1c100s-dma reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/dma/atmel,sama5d4-dma.yaml b/Documentation/devicetree/bindings/dma/atmel,sama5d4-dma.yaml new file mode 100644 index 000000000000..9ca1c5d1f00f --- /dev/null +++ b/Documentation/devicetree/bindings/dma/atmel,sama5d4-dma.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/atmel,sama5d4-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip AT91 Extensible Direct Memory Access Controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Charan Pedumuru <charan.pedumuru@microchip.com> + +description: + The DMA Controller (XDMAC) is a AHB-protocol central direct memory access + controller. It performs peripheral data transfer and memory move operations + over one or two bus ports through the unidirectional communication + channel. Each channel is fully programmable and provides both peripheral + or memory-to-memory transfers. The channel features are configurable at + implementation. + +allOf: + - $ref: dma-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - atmel,sama5d4-dma + - microchip,sama7g5-dma + - items: + - enum: + - microchip,sam9x60-dma + - microchip,sam9x7-dma + - const: atmel,sama5d4-dma + + "#dma-cells": + description: | + Represents the number of integer cells in the `dmas` property of client + devices. The single cell specifies the channel configuration register: + - bit 13: SIF (Source Interface Identifier) for memory interface. + - bit 14: DIF (Destination Interface Identifier) for peripheral interface. + - bit 30-24: PERID (Peripheral Identifier). + const: 1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: dma_clk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - "#dma-cells" + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + dma-controller@f0008000 { + compatible = "atmel,sama5d4-dma"; + reg = <0xf0008000 0x1000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + clock-names = "dma_clk"; + }; diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt deleted file mode 100644 index 76d649b3a25d..000000000000 --- a/Documentation/devicetree/bindings/dma/atmel-xdma.txt +++ /dev/null @@ -1,54 +0,0 @@ -* Atmel Extensible Direct Memory Access Controller (XDMAC) - -* XDMA Controller -Required properties: -- compatible: Should be "atmel,sama5d4-dma", "microchip,sam9x60-dma" or - "microchip,sama7g5-dma" or - "microchip,sam9x7-dma", "atmel,sama5d4-dma". -- reg: Should contain DMA registers location and length. -- interrupts: Should contain DMA interrupt. -- #dma-cells: Must be <1>, used to represent the number of integer cells in -the dmas property of client devices. - - The 1st cell specifies the channel configuration register: - - bit 13: SIF, source interface identifier, used to get the memory - interface identifier, - - bit 14: DIF, destination interface identifier, used to get the peripheral - interface identifier, - - bit 30-24: PERID, peripheral identifier. - -Example: - -dma1: dma-controller@f0004000 { - compatible = "atmel,sama5d4-dma"; - reg = <0xf0004000 0x200>; - interrupts = <50 4 0>; - #dma-cells = <1>; -}; - - -* DMA clients -DMA clients connected to the Atmel XDMA controller must use the format -described in the dma.txt file, using a one-cell specifier for each channel. -The two cells in order are: -1. A phandle pointing to the DMA controller. -2. Channel configuration register. Configurable fields are: - - bit 13: SIF, source interface identifier, used to get the memory - interface identifier, - - bit 14: DIF, destination interface identifier, used to get the peripheral - interface identifier, - - bit 30-24: PERID, peripheral identifier. - -Example: - -i2c2: i2c@f8024000 { - compatible = "atmel,at91sam9x5-i2c"; - reg = <0xf8024000 0x4000>; - interrupts = <34 4 6>; - dmas = <&dma1 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(6))>, - <&dma1 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(7))>; - dma-names = "tx", "rx"; -}; diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml index d54140f18d34..4f925469533e 100644 --- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml +++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml @@ -26,9 +26,13 @@ properties: - fsl,imx93-edma3 - fsl,imx93-edma4 - fsl,imx95-edma5 + - nxp,s32g2-edma - items: - const: fsl,ls1028a-edma - const: fsl,vf610-edma + - items: + - const: nxp,s32g3-edma + - const: nxp,s32g2-edma reg: minItems: 1 @@ -221,6 +225,36 @@ allOf: properties: power-domains: false + - if: + properties: + compatible: + contains: + const: nxp,s32g2-edma + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: dmamux0 + - const: dmamux1 + interrupts: + minItems: 3 + maxItems: 3 + interrupt-names: + items: + - const: tx-0-15 + - const: tx-16-31 + - const: err + reg: + minItems: 3 + maxItems: 3 + "#dma-cells": + const: 2 + dma-channels: + const: 32 + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml index 877147e95ecc..d3f8c269916c 100644 --- a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml @@ -13,9 +13,6 @@ description: | maintainers: - Jon Hunter <jonathanh@nvidia.com> -allOf: - - $ref: dma-controller.yaml# - properties: compatible: oneOf: @@ -29,7 +26,19 @@ properties: - const: nvidia,tegra186-adma reg: - maxItems: 1 + description: + The 'page' region describes the address space of the page + used for accessing the DMA channel registers. The 'global' + region describes the address space of the global DMA registers. + In the absence of the 'reg-names' property, there must be a + single entry that covers the address space of the global DMA + registers and the DMA channel registers. + minItems: 1 + maxItems: 2 + + reg-names: + minItems: 1 + maxItems: 2 interrupts: description: | @@ -63,6 +72,49 @@ required: - clocks - clock-names +allOf: + - $ref: dma-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra210-adma + then: + properties: + reg: + items: + - description: Full address space range of DMA registers. + + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra186-adma + then: + anyOf: + - properties: + reg: + items: + - description: Full address space range of DMA registers. + - properties: + reg: + items: + - description: Channel Page address space range of DMA registers. + reg-names: + items: + - const: page + - properties: + reg: + items: + - description: Channel Page address space range of DMA registers. + - description: Global Page address space range of DMA registers. + reg-names: + items: + - const: page + - const: global + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml index 4ad56a409b9c..7052468b15c8 100644 --- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml +++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml @@ -25,7 +25,9 @@ properties: - items: - enum: - qcom,qcm2290-gpi-dma + - qcom,qcs8300-gpi-dma - qcom,qdu1000-gpi-dma + - qcom,sa8775p-gpi-dma - qcom,sar2130p-gpi-dma - qcom,sc7280-gpi-dma - qcom,sdx75-gpi-dma @@ -35,10 +37,12 @@ properties: - qcom,sm8450-gpi-dma - qcom,sm8550-gpi-dma - qcom,sm8650-gpi-dma + - qcom,sm8750-gpi-dma - qcom,x1e80100-gpi-dma - const: qcom,sm6350-gpi-dma - items: - enum: + - qcom,qcs615-gpi-dma - qcom,sdm670-gpi-dma - qcom,sm6125-gpi-dma - qcom,sm8150-gpi-dma diff --git a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dmamux.yaml index f26c914a3a9a..b7bca1a83769 100644 --- a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dmamux.yaml +++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dmamux.yaml @@ -15,6 +15,16 @@ allOf: properties: "#dma-cells": const: 3 + description: | + Each cell represents the following: + 1. The mux input number/line for the request + 2. Bitfield representing DMA channel configuration that is passed + to the real DMA controller + 3. Bitfield representing device dependent DMA features passed to + the real DMA controller + + For bitfield definitions of cells 2 and 3, see the associated + bindings doc for the actual DMA controller in st,stm32-dma.yaml. compatible: const: st,stm32h7-dmamux diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml index 27b8e1636560..b5bc842c5a0e 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml @@ -34,6 +34,7 @@ properties: - ti,am62a-dmss-bcdma-csirx - ti,am64-dmss-bcdma - ti,j721s2-dmss-bcdma-csi + - ti,j722s-dmss-bcdma-csi reg: minItems: 3 @@ -196,7 +197,9 @@ allOf: properties: compatible: contains: - const: ti,j721s2-dmss-bcdma-csi + enum: + - ti,j721s2-dmss-bcdma-csi + - ti,j722s-dmss-bcdma-csi then: properties: ti,sci-rm-range-bchan: false diff --git a/Documentation/devicetree/bindings/dts-coding-style.rst b/Documentation/devicetree/bindings/dts-coding-style.rst index 8a68331075a0..4772ded8a987 100644 --- a/Documentation/devicetree/bindings/dts-coding-style.rst +++ b/Documentation/devicetree/bindings/dts-coding-style.rst @@ -162,14 +162,17 @@ Example:: status = "okay"; } -Indentation ------------ +Indentation and wrapping +------------------------ -1. Use indentation according to Documentation/process/coding-style.rst. +1. Use indentation and wrap lines according to + Documentation/process/coding-style.rst. 2. Each entry in arrays with multiple cells, e.g. "reg" with two IO addresses, shall be enclosed in <>. -3. For arrays spanning across lines, it is preferred to align the continued - entries with opening < from the first line. +3. For arrays spanning across lines, it is preferred to split on item boundary + and align the continued entries with opening < from the first line. + Usually avoid splitting individual items unless they significantly exceed + line wrap limit. Example:: @@ -177,6 +180,9 @@ Example:: compatible = "qcom,sm8550-tsens", "qcom,tsens-v2"; reg = <0x0 0x0c271000 0x0 0x1000>, <0x0 0x0c222000 0x0 0x1000>; + /* Lines exceeding coding style line wrap limit: */ + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; }; Organizing DTSI and DTS diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 590ba0ef5fa2..c9e4afbdc448 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -134,10 +134,15 @@ properties: - const: atmel,24c64 - items: - enum: + - giantec,gt24p128f - renesas,r1ex24128 - samsung,s524ad0xd1 - const: atmel,24c128 - items: + - enum: + - puya,p24c256c + - const: atmel,24c256 + - items: - const: microchip,24aa025e48 - items: - const: microchip,24aa025e64 diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index 2ee030000007..8cdaac8011ba 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -26,6 +26,7 @@ properties: - qcom,scm-ipq4019 - qcom,scm-ipq5018 - qcom,scm-ipq5332 + - qcom,scm-ipq5424 - qcom,scm-ipq6018 - qcom,scm-ipq806x - qcom,scm-ipq8074 @@ -42,6 +43,7 @@ properties: - qcom,scm-msm8996 - qcom,scm-msm8998 - qcom,scm-qcm2290 + - qcom,scm-qcs615 - qcom,scm-qcs8300 - qcom,scm-qdu1000 - qcom,scm-sa8255p diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml index f096f286da19..fbd69b4cecc7 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml @@ -64,6 +64,10 @@ properties: gpio-ranges: true + gpio-line-names: + minItems: 1 + maxItems: 128 + wakeup-source: type: boolean description: > diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml index e8bc9f018edb..0e5c22929bde 100644 --- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml +++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml @@ -6,6 +6,23 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Generic 8-bit shift register +description: | + NOTE: These chips nominally don't have a chip select pin. They do however + have a rising-edge triggered latch clock (or storage register clock) pin, + which behaves like an active-low chip select. + + After the bits are shifted into the shift register, CS# is driven high, which + the 74HC595 sees as a rising edge on the latch clock that results in a + transfer of the bits from the shift register to the storage register and thus + to the output pins. + _ _ _ _ + shift clock ____| |_| |_..._| |_| |_________ + + latch clock * trigger + ___ ________ + chip select# |___________________| + + maintainers: - Maxime Ripard <mripard@kernel.org> diff --git a/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml index 84fd82291ee4..f1b60ab3f356 100644 --- a/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml @@ -15,6 +15,7 @@ properties: - enum: - fsl,mpc5121-gpio - fsl,mpc5125-gpio + - fsl,mpc8314-gpio - fsl,mpc8349-gpio - fsl,mpc8572-gpio - fsl,mpc8610-gpio diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml index abd4aa335fbc..9318817ea135 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml @@ -33,6 +33,7 @@ properties: - rockchip,rk3188-mali - rockchip,rk3228-mali - samsung,exynos4210-mali + - st,stih410-mali - stericsson,db8500-mali - xlnx,zynqmp-mali - const: arm,mali-400 diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml index 5b076d677395..fd79bf2e0d16 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml @@ -24,6 +24,7 @@ properties: enum: - adi,adm1075 - adi,adm1272 + - adi,adm1273 - adi,adm1275 - adi,adm1276 - adi,adm1278 @@ -79,6 +80,7 @@ allOf: contains: enum: - adi,adm1272 + - adi,adm1273 then: properties: adi,volt-curr-sample-average: diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml index 29bd7460cc26..c38255243f57 100644 --- a/Documentation/devicetree/bindings/hwmon/lm75.yaml +++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml @@ -28,6 +28,7 @@ properties: - maxim,max31725 - maxim,max31726 - maxim,mcp980x + - nxp,p3t1755 - nxp,pct2075 - st,stds75 - st,stlm75 diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml index cc8bba5537b9..70cc2ee9ee27 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml @@ -25,6 +25,7 @@ properties: - samsung,exynos5250-hsi2c # Exynos5250 and Exynos5420 - samsung,exynos5260-hsi2c # Exynos5260 - samsung,exynos7-hsi2c # Exynos7 + - samsung,exynos8895-hsi2c - samsung,exynosautov9-hsi2c - items: - enum: diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml index ef26ba6eda28..73144473b9b2 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml @@ -34,6 +34,7 @@ properties: - qcom,sm8450-cci - qcom,sm8550-cci - qcom,sm8650-cci + - qcom,x1e80100-cci - const: qcom,msm8996-cci # CCI v2 "#address-cells": @@ -224,6 +225,7 @@ allOf: enum: - qcom,sm8550-cci - qcom,sm8650-cci + - qcom,x1e80100-cci then: properties: clocks: diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml index 505a8ec92266..1b7fed232642 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml @@ -26,7 +26,9 @@ properties: - const: renesas,riic-rz # RZ/A or RZ/G2L - items: - - const: renesas,riic-r9a08g045 # RZ/G3S + - enum: + - renesas,riic-r9a08g045 # RZ/G3S + - renesas,riic-r9a09g047 # RZ/G3E - const: renesas,riic-r9a09g057 # RZ/V2H(P) - const: renesas,riic-r9a09g057 # RZ/V2H(P) @@ -89,6 +91,7 @@ if: - renesas,riic-r9a07g043 - renesas,riic-r9a07g044 - renesas,riic-r9a07g054 + - renesas,riic-r9a09g057 then: required: - resets diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index 280ed479ef5a..84d949392012 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -37,10 +37,17 @@ properties: interrupts: maxItems: 1 + interrupt-names: + items: + - enum: [INT1, INT2] + +dependencies: + interrupts: [ interrupt-names ] + interrupt-names: [ interrupts ] + required: - compatible - reg - - interrupts allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# @@ -61,6 +68,7 @@ examples: reg = <0x2a>; interrupt-parent = <&gpio0>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1"; }; }; - | @@ -79,5 +87,6 @@ examples: spi-cpha; interrupt-parent = <&gpio0>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT2"; }; }; diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml index 66ea894dbe55..f07c70e51c45 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml @@ -4,23 +4,26 @@ $id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM/Kionix KX022A, KX132-1211 and KX132ACR-LBZ Accelerometers +title: ROHM/Kionix KX022A, KX132/134-1211 and KX132/134ACR-LBZ Accelerometers maintainers: - Matti Vaittinen <mazziesaccount@gmail.com> description: | KX022A, KX132ACR-LBZ and KX132-1211 are 3-axis accelerometers supporting - +/- 2G, 4G, 8G and 16G ranges, variable output data-rates and a - hardware-fifo buffering. These accelerometers can be accessed either - via I2C or SPI. + +/- 2G, 4G, 8G and 16G ranges. The KX134ACR-LBZ and KX134-1211 support + +/- 8G, 16G, 32G and 64G. All the sensors also have variable output + data-rates and a hardware-fifo buffering. These accelerometers can be + accessed either via I2C or SPI. properties: compatible: enum: - kionix,kx022a - kionix,kx132-1211 + - kionix,kx134-1211 - rohm,kx132acr-lbz + - rohm,kx134acr-lbz reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml index 783c7ddfcd90..c175f4c4cbdb 100644 --- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml +++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml @@ -14,12 +14,20 @@ description: | SPI and I2C interface. https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf + https://www.nxp.com/docs/en/data-sheet/FXLS8967AF.pdf + https://www.nxp.com/docs/en/data-sheet/FXLS8974CF.pdf properties: compatible: - enum: - - nxp,fxls8962af - - nxp,fxls8964af + oneOf: + - enum: + - nxp,fxls8962af + - nxp,fxls8964af + - items: + - enum: + - nxp,fxls8967af + - nxp,fxls8974cf + - const: nxp,fxls8962af reg: maxItems: 1 @@ -38,6 +46,11 @@ properties: drive-open-drain: type: boolean + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable wake on accelerometer event + required: - compatible - reg @@ -61,6 +74,7 @@ examples: interrupt-parent = <&gpio0>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "INT1"; + wakeup-source; }; }; - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml index e413a9d8d2a2..96e01a97dd95 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml @@ -19,49 +19,82 @@ description: | https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7685.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7686.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7687.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7688.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7690.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7691.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7693.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7942.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7946.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7980.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7982.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7983.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7984.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7988-1_7988-5.pdf $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: oneOf: - - const: adi,ad4000 + - enum: + - adi,ad4000 + - adi,ad4001 + - adi,ad4002 + - adi,ad4003 + - adi,ad4020 + - adi,adaq4001 + - adi,adaq4003 + - adi,ad7687 + - adi,ad7691 + - adi,ad7942 + - adi,ad7946 + - adi,ad7983 - items: - enum: - adi,ad4004 - adi,ad4008 - const: adi,ad4000 - - - const: adi,ad4001 - items: - enum: - adi,ad4005 - const: adi,ad4001 - - - const: adi,ad4002 - items: - enum: - adi,ad4006 - adi,ad4010 - const: adi,ad4002 - - - const: adi,ad4003 - items: - enum: - adi,ad4007 - adi,ad4011 - const: adi,ad4003 - - - const: adi,ad4020 - items: - enum: - adi,ad4021 - adi,ad4022 - const: adi,ad4020 - - - const: adi,adaq4001 - - - const: adi,adaq4003 + - items: + - enum: + - adi,ad7685 + - adi,ad7686 + - adi,ad7980 + - adi,ad7988-1 + - adi,ad7988-5 + - const: adi,ad7983 + - items: + - enum: + - adi,ad7688 + - adi,ad7693 + - const: adi,ad7687 + - items: + - enum: + - adi,ad7690 + - adi,ad7982 + - adi,ad7984 + - const: adi,ad7691 reg: maxItems: 1 @@ -133,6 +166,22 @@ required: - ref-supply allOf: + # Single-channel PulSAR devices have SDI either tied to VIO, GND, or host CS. + - if: + properties: + compatible: + contains: + enum: + - adi,ad7687 + - adi,ad7691 + - adi,ad7942 + - adi,ad7946 + - adi,ad7983 + then: + properties: + adi,sdi-pin: + enum: [ high, low, cs ] + default: cs # The configuration register can only be accessed if SDI is connected to MOSI - if: required: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml index 310f046e139f..7d2229dee444 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml @@ -134,8 +134,9 @@ patternProperties: description: Describes the common mode channel for single channels. 0xFF is REFGND and OxFE is COM. Macros are available for these values in - dt-bindings/iio/adi,ad4695.h. Values 1 to 15 correspond to INx inputs. - Only odd numbered INx inputs can be used as common mode channels. + dt-bindings/iio/adc/adi,ad4695.h. Values 1 to 15 correspond to INx + inputs. Only odd numbered INx inputs can be used as common mode + channels. enum: [1, 3, 5, 7, 9, 11, 13, 15, 0xFE, 0xFF] default: 0xFF @@ -209,7 +210,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/iio/adi,ad4695.h> + #include <dt-bindings/iio/adc/adi,ad4695.h> spi { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index 35ed04350e28..7146a654ae38 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -37,6 +37,17 @@ properties: description: IRQ line for the ADC maxItems: 1 + rdy-gpios: + description: + GPIO reading the RÌ…DÌ…YÌ… line. Having such a GPIO is technically optional but + highly recommended because DOUT/RÌ…DÌ…YÌ… toggles during SPI transfers (in its + DOUT aka MISO role) and so usually triggers a spurious interrupt. The + distinction between such a spurious event and a real one can only be done + by reading such a GPIO. (There is a register telling the same + information, but accessing that one needs a SPI transfer which then + triggers another interrupt event.) + maxItems: 1 + '#address-cells': const: 1 @@ -111,6 +122,7 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> spi { #address-cells = <1>; #size-cells = <0>; @@ -121,6 +133,7 @@ examples: spi-max-frequency = <5000000>; interrupts = <25 2>; interrupt-parent = <&gpio>; + rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>; refin1-supply = <&adc_vref>; clocks = <&ad7124_mclk>; clock-names = "mclk"; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml index ad15cf9bc2ff..21ee319d4675 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml @@ -135,6 +135,17 @@ properties: '#clock-cells': const: 0 + rdy-gpios: + description: + GPIO reading the RÌ…DÌ…YÌ… line. Having such a GPIO is technically optional but + highly recommended because DOUT/RÌ…DÌ…YÌ… toggles during SPI transfers (in its + DOUT aka MISO role) and so usually triggers a spurious interrupt. The + distinction between such a spurious event and a real one can only be done + by reading such a GPIO. (There is a register telling the same + information, but accessing that one needs a SPI transfer which then + triggers another interrupt event.) + maxItems: 1 + patternProperties: "^channel@[0-9a-f]$": type: object @@ -443,6 +454,7 @@ examples: interrupts = <25 IRQ_TYPE_EDGE_FALLING>; interrupt-names = "rdy"; interrupt-parent = <&gpio>; + rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>; spi-max-frequency = <5000000>; gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index 66dd1c549bd3..0bd2c6906c83 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -106,6 +106,17 @@ properties: description: see Documentation/devicetree/bindings/iio/adc/adc.yaml type: boolean + rdy-gpios: + description: + GPIO reading the RÌ…DÌ…YÌ… line. Having such a GPIO is technically optional but + highly recommended because DOUT/RÌ…DÌ…YÌ… toggles during SPI transfers (in its + DOUT aka MISO role) and so usually triggers a spurious interrupt. The + distinction between such a spurious event and a real one can only be done + by reading such a GPIO. (There is a register telling the same + information, but accessing that one needs a SPI transfer which then + triggers another interrupt event.) + maxItems: 1 + patternProperties: "^channel@[0-9a-f]+$": type: object @@ -181,6 +192,7 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> spi { #address-cells = <1>; #size-cells = <0>; @@ -195,6 +207,7 @@ examples: clock-names = "mclk"; interrupts = <25 0x2>; interrupt-parent = <&gpio>; + rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>; aincom-supply = <&aincom>; dvdd-supply = <&dvdd>; avdd-supply = <&avdd>; @@ -207,6 +220,7 @@ examples: }; }; - | + #include <dt-bindings/gpio/gpio.h> spi { #address-cells = <1>; #size-cells = <0>; @@ -224,6 +238,7 @@ examples: #clock-cells = <0>; interrupts = <25 0x2>; interrupt-parent = <&gpio>; + rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>; aincom-supply = <&aincom>; dvdd-supply = <&dvdd>; avdd-supply = <&avdd>; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml index be2616ff9af6..5c8df45bfab0 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml @@ -63,6 +63,17 @@ properties: marked GPIO_ACTIVE_LOW. maxItems: 1 + rdy-gpios: + description: + GPIO reading the RÌ…DÌ…YÌ… line. Having such a GPIO is technically optional but + highly recommended because DOUT/RÌ…DÌ…YÌ… toggles during SPI transfers (in its + DOUT aka MISO role) and so usually triggers a spurious interrupt. The + distinction between such a spurious event and a real one can only be done + by reading such a GPIO. (There is a register telling the same + information, but accessing that one needs a SPI transfer which then + triggers another interrupt event.) + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml index ba86c7b7d622..40341d541726 100644 --- a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml @@ -17,12 +17,15 @@ description: | properties: compatible: - items: - - enum: - - renesas,r9a07g043-adc # RZ/G2UL and RZ/Five - - renesas,r9a07g044-adc # RZ/G2L - - renesas,r9a07g054-adc # RZ/V2L - - const: renesas,rzg2l-adc + oneOf: + - items: + - enum: + - renesas,r9a07g043-adc # RZ/G2UL and RZ/Five + - renesas,r9a07g044-adc # RZ/G2L + - renesas,r9a07g054-adc # RZ/V2L + - const: renesas,rzg2l-adc + - items: + - const: renesas,r9a08g045-adc # RZ/G3S reg: maxItems: 1 @@ -57,6 +60,9 @@ properties: '#size-cells': const: 0 + "#io-channel-cells": + const: 1 + required: - compatible - reg @@ -68,7 +74,7 @@ required: - reset-names patternProperties: - "^channel@[0-7]$": + "^channel@[0-8]$": $ref: adc.yaml type: object description: | @@ -78,6 +84,8 @@ patternProperties: reg: description: | The channel number. + minimum: 0 + maximum: 8 required: - reg @@ -92,18 +100,25 @@ allOf: const: renesas,r9a07g043-adc then: patternProperties: - "^channel@[2-7]$": false + "^channel@[2-8]$": false "^channel@[0-1]$": properties: reg: - minimum: 0 maximum: 1 - else: + + - if: + properties: + compatible: + contains: + enum: + - renesas,r9a07g044-adc + - renesas,r9a07g054-adc + then: patternProperties: + "^channel@[8]$": false "^channel@[0-7]$": properties: reg: - minimum: 0 maximum: 7 additionalProperties: false diff --git a/Documentation/devicetree/bindings/iio/chemical/bosch,bme680.yaml b/Documentation/devicetree/bindings/iio/chemical/bosch,bme680.yaml new file mode 100644 index 000000000000..fe98ec44f081 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/bosch,bme680.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/bosch,bme680.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BME680 Gas sensor + +maintainers: + - Vasileios Amoiridis <vassilisamir@gmail.com> + +description: > + BME680 is a gas sensor which combines relative humidity, barometric pressure, + ambient temperature and gas (VOC - Volatile Organic Compounds) measurements. + + https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme680-ds001.pdf + +properties: + compatible: + const: bosch,bme680 + + reg: + maxItems: 1 + + vdd-supply: true + vddio-supply: true + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + co2-sensor@77 { + compatible = "bosch,bme680"; + reg = <0x77>; + vddio-supply = <&vddio>; + vdd-supply = <&vdd>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + co2-sensor@0 { + compatible = "bosch,bme680"; + reg = <0>; + spi-max-frequency = <500000>; + vddio-supply = <&vddio>; + vdd-supply = <&vdd>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml index 79cb4b78a88a..2bd89e0aa46b 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml @@ -91,7 +91,7 @@ examples: vrefn-supply = <&dac_vrefn>; reset-gpios = <&gpio_bd 16 GPIO_ACTIVE_LOW>; clear-gpios = <&gpio_bd 17 GPIO_ACTIVE_LOW>; - ldac-gpios = <&gpio_bd 18 GPIO_ACTIVE_HIGH>; + ldac-gpios = <&gpio_bd 18 GPIO_ACTIVE_LOW>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml b/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml new file mode 100644 index 000000000000..941a49c93943 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2024 ROHM Semiconductor. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/rohm,bd79703.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD79703 DAC device driver + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + The ROHM BD79703 is a 6 channel, 8-bit DAC. + Datasheet can be found here: + https://fscdn.rohm.com/en/products/databook/datasheet/ic/data_converter/dac/bd79702fv-lb_bd79703fv-lb-e.pdf + +properties: + compatible: + const: rohm,bd79703 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 30000000 + + vfs-supply: + description: + The regulator to use as a full scale voltage. The voltage should be between 2.7V .. VCC + + vcc-supply: + description: + The regulator supplying the operating voltage. Should be between 2.7V ... 5.5V + +required: + - compatible + - reg + - spi-max-frequency + - vfs-supply + - vcc-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "rohm,bd79703"; + reg = <0>; + spi-max-frequency = <30000000>; + vcc-supply = <&vcc>; + vfs-supply = <&vref>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml index e3eec38897bf..7a1a74fec281 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml @@ -11,24 +11,30 @@ maintainers: properties: compatible: - enum: - - adi,adis16375 - - adi,adis16480 - - adi,adis16485 - - adi,adis16488 - - adi,adis16490 - - adi,adis16495-1 - - adi,adis16495-2 - - adi,adis16495-3 - - adi,adis16497-1 - - adi,adis16497-2 - - adi,adis16497-3 - - adi,adis16545-1 - - adi,adis16545-2 - - adi,adis16545-3 - - adi,adis16547-1 - - adi,adis16547-2 - - adi,adis16547-3 + oneOf: + - enum: + - adi,adis16375 + - adi,adis16480 + - adi,adis16485 + - adi,adis16486 + - adi,adis16488 + - adi,adis16489 + - adi,adis16490 + - adi,adis16495-1 + - adi,adis16495-2 + - adi,adis16495-3 + - adi,adis16497-1 + - adi,adis16497-2 + - adi,adis16497-3 + - adi,adis16545-1 + - adi,adis16545-2 + - adi,adis16545-3 + - adi,adis16547-1 + - adi,adis16547-2 + - adi,adis16547-3 + - items: + - const: adi,adis16487 + - const: adi,adis16485 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml index 3b0a2d8b2e91..2cf8a0c7eb4c 100644 --- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml @@ -37,6 +37,7 @@ properties: to "INT2" if INT2 pin should be used instead drive-open-drain: + type: boolean description: | set if the specified interrupt pin should be configured as open drain. If not set, defaults to push-pull. diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml index 7b0cde1c9b0a..860a6c1fea3c 100644 --- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml @@ -41,6 +41,7 @@ properties: - INT2 drive-open-drain: + type: boolean description: set if the specified interrupt pins should be configured as open drain. If not set, defaults to push-pull. diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml index 64ef26e19669..7bf8294a8f2e 100644 --- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml @@ -38,6 +38,7 @@ properties: - INT2 drive-open-drain: + type: boolean description: set if the specified interrupt pin should be configured as open drain. If not set, defaults to push-pull. diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index f91954870a44..0bce71529e34 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -16,6 +16,7 @@ properties: compatible: oneOf: - enum: + - invensense,iam20380 - invensense,iam20680 - invensense,icm20608 - invensense,icm20609 diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml deleted file mode 100644 index 4f66fd47b016..000000000000 --- a/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml +++ /dev/null @@ -1,49 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/iio/light/rohm,bu27008.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: ROHM BU27008 color sensor - -maintainers: - - Matti Vaittinen <mazziesaccount@gmail.com> - -description: - The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear - and IR) with four configurable channels. Red and green being always - available and two out of the rest three (blue, clear, IR) can be - selected to be simultaneously measured. Typical application is adjusting - LCD backlight of TVs, mobile phones and tablet PCs. - -properties: - compatible: - const: rohm,bu27008 - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - vdd-supply: true - -required: - - compatible - - reg - -additionalProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - light-sensor@38 { - compatible = "rohm,bu27008"; - reg = <0x38>; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml deleted file mode 100644 index bed42d5d0d94..000000000000 --- a/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml +++ /dev/null @@ -1,50 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/iio/light/rohm,bu27010.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: ROHM BU27010 color sensor - -maintainers: - - Matti Vaittinen <mazziesaccount@gmail.com> - -description: | - The ROHM BU27010 is a sensor with 6 photodiodes (red, green, blue, clear, - IR and flickering detection) with five configurable channels. Red, green - and flickering detection being always available and two out of the rest - three (blue, clear, IR) can be selected to be simultaneously measured. - Typical application is adjusting LCD/OLED backlight of TVs, mobile phones - and tablet PCs. - -properties: - compatible: - const: rohm,bu27010 - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - vdd-supply: true - -required: - - compatible - - reg - - vdd-supply - -additionalProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - light-sensor@38 { - compatible = "rohm,bu27010"; - reg = <0x38>; - vdd-supply = <&vdd>; - }; - }; diff --git a/Documentation/devicetree/bindings/iio/light/ti,opt4060.yaml b/Documentation/devicetree/bindings/iio/light/ti,opt4060.yaml new file mode 100644 index 000000000000..568fb2a9b7a3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/ti,opt4060.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/ti,opt4060.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments OPT4060 RGBW Color Sensor + +maintainers: + - Per-Daniel Olsson <perdaniel.olsson@axis.com> + +description: + Texas Instrument RGBW high resolution color sensor over I2C. + https://www.ti.com/lit/gpn/opt4060 + +properties: + compatible: + enum: + - ti,opt4060 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@44 { + compatible = "ti,opt4060"; + reg = <0x44>; + vdd-supply = <&vdd_reg>; + interrupt-parent = <&gpio5>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml index cb201cecfa1a..706b7e24f182 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -55,12 +55,16 @@ properties: If not set, defaults to push-pull configuration. type: boolean + spi-max-frequency: + maximum: 10000000 + required: - compatible - vddd-supply - vdda-supply allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -73,6 +77,16 @@ allOf: then: properties: interrupts: false + - if: + properties: + compatible: + contains: + enum: + - bosch,bmp085 + - bosch,bmp180 + then: + properties: + spi-max-frequency: false additionalProperties: false @@ -93,3 +107,18 @@ examples: vdda-supply = <&bar>; }; }; + - | + # include <dt-bindings/gpio/gpio.h> + # include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + pressure@0 { + compatible = "bosch,bmp280"; + reg = <0>; + spi-max-frequency = <10000000>; + reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + vddd-supply = <&foo>; + vdda-supply = <&bar>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index 71c1ee33a393..e955eb8e8797 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -65,6 +65,7 @@ properties: - st,lsm9ds0-gyro - description: STMicroelectronics Magnetometers enum: + - st,iis2mdc - st,lis2mdl - st,lis3mdl-magn - st,lsm303agr-magn diff --git a/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml index 47aac8794b68..517a4ac1bea3 100644 --- a/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml +++ b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml @@ -26,6 +26,9 @@ properties: - items: - enum: - mediatek,mt6873-keypad + - mediatek,mt8183-keypad + - mediatek,mt8365-keypad + - mediatek,mt8516-keypad - const: mediatek,mt6779-keypad reg: diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml index 60f09caa0e4c..b95435bd6a9b 100644 --- a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml +++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml @@ -25,6 +25,7 @@ properties: compatible: enum: - mediatek,mt6323-keys + - mediatek,mt6328-keys - mediatek,mt6331-keys - mediatek,mt6357-keys - mediatek,mt6358-keys diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml index 251410aabf38..83bcf0575cd3 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -26,6 +26,7 @@ properties: - items: - enum: - qcom,qcm2290-cpu-bwmon + - qcom,qcs615-cpu-bwmon - qcom,qcs8300-cpu-bwmon - qcom,sa8775p-cpu-bwmon - qcom,sc7180-cpu-bwmon @@ -37,10 +38,12 @@ properties: - qcom,sm8250-cpu-bwmon - qcom,sm8550-cpu-bwmon - qcom,sm8650-cpu-bwmon + - qcom,sm8750-cpu-bwmon - qcom,x1e80100-cpu-bwmon - const: qcom,sdm845-bwmon # BWMON v4, unified register space - items: - enum: + - qcom,qcs615-llcc-bwmon - qcom,qcs8300-llcc-bwmon - qcom,sa8775p-llcc-bwmon - qcom,sc7180-llcc-bwmon diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml index 21dae0b92819..4ac0863205b3 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml @@ -33,6 +33,7 @@ properties: - qcom,sm6375-cpucp-l3 - qcom,sm8250-epss-l3 - qcom,sm8350-epss-l3 + - qcom,sm8650-epss-l3 - const: qcom,epss-l3 reg: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8750-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8750-rpmh.yaml new file mode 100644 index 000000000000..a816acc301e1 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8750-rpmh.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sm8750-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on SM8750 + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + + See also:: include/dt-bindings/interconnect/qcom,sm8750-rpmh.h + +properties: + compatible: + enum: + - qcom,sm8750-aggre1-noc + - qcom,sm8750-aggre2-noc + - qcom,sm8750-clk-virt + - qcom,sm8750-cnoc-main + - qcom,sm8750-config-noc + - qcom,sm8750-gem-noc + - qcom,sm8750-lpass-ag-noc + - qcom,sm8750-lpass-lpiaon-noc + - qcom,sm8750-lpass-lpicx-noc + - qcom,sm8750-mc-virt + - qcom,sm8750-mmss-noc + - qcom,sm8750-nsp-noc + - qcom,sm8750-pcie-anoc + - qcom,sm8750-system-noc + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + +required: + - compatible + +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8750-clk-virt + - qcom,sm8750-mc-virt + then: + properties: + reg: false + else: + required: + - reg + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8750-pcie-anoc + then: + properties: + clocks: + items: + - description: aggre-NOC PCIe AXI clock + - description: cfg-NOC PCIe a-NOC AHB clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8750-aggre1-noc + then: + properties: + clocks: + items: + - description: aggre UFS PHY AXI clock + - description: aggre USB3 PRIM AXI clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8750-aggre2-noc + then: + properties: + clocks: + items: + - description: RPMH CC IPA clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8750-aggre1-noc + - qcom,sm8750-aggre2-noc + - qcom,sm8750-pcie-anoc + then: + required: + - clocks + else: + properties: + clocks: false + +unevaluatedProperties: false + +examples: + - | + clk_virt: interconnect-0 { + compatible = "qcom,sm8750-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8750-aggre1-noc"; + reg = <0x016e0000 0x16400>; + #interconnect-cells = <2>; + clocks = <&gcc_phy_axi_clk>, <&gcc_prim_axi_clk>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml index a2846e493497..7173c4b5a228 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml @@ -110,8 +110,8 @@ properties: interrupts: description: Interrupt source of the parent interrupt controller on - secondary GICs, or VGIC maintenance interrupt on primary GIC (see - below). + secondary GICs, or VGIC maintenance interrupt on primary GIC (see "GICv2 + with virtualization extensions" paragraph in the "reg" property). maxItems: 1 cpu-offset: diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.yaml index 73e8b9a39bd7..86516cd44b9d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.yaml @@ -52,11 +52,11 @@ additionalProperties: false examples: - | interrupt-controller@1e6c0080 { - compatible = "aspeed,ast2400-vic"; - reg = <0x1e6c0080 0x80>; - interrupt-controller; - #interrupt-cells = <1>; - valid-sources = <0xffffffff 0x0007ffff>; + compatible = "aspeed,ast2400-vic"; + reg = <0x1e6c0080 0x80>; + interrupt-controller; + #interrupt-cells = <1>; + valid-sources = <0xffffffff 0x0007ffff>; }; ... diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml index 786f2426399b..0fcbe304cd05 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml @@ -130,23 +130,23 @@ required: examples: - | irq0_intc: interrupt-controller@f0406800 { - compatible = "brcm,bcm7120-l2-intc"; - interrupt-parent = <&intc>; - #interrupt-cells = <1>; - reg = <0xf0406800 0x8>; - interrupt-controller; - interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>; - brcm,int-map-mask = <0xeb8>, <0x140>; - brcm,int-fwd-mask = <0x7>; + compatible = "brcm,bcm7120-l2-intc"; + interrupt-parent = <&intc>; + #interrupt-cells = <1>; + reg = <0xf0406800 0x8>; + interrupt-controller; + interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>; + brcm,int-map-mask = <0xeb8>, <0x140>; + brcm,int-fwd-mask = <0x7>; }; - | irq1_intc: interrupt-controller@10000020 { - compatible = "brcm,bcm3380-l2-intc"; - reg = <0x10000024 0x4>, <0x1000002c 0x4>, - <0x10000020 0x4>, <0x10000028 0x4>; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&cpu_intc>; - interrupts = <2>; + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x10000024 0x4>, <0x1000002c 0x4>, + <0x10000020 0x4>, <0x10000028 0x4>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpu_intc>; + interrupts = <2>; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml index a54da66a89e7..f06b40f88778 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml @@ -26,6 +26,8 @@ properties: compatible: items: - enum: + - qcom,qcs615-pdc + - qcom,qcs8300-pdc - qcom,qdu1000-pdc - qcom,sa8255p-pdc - qcom,sa8775p-pdc @@ -47,6 +49,7 @@ properties: - qcom,sm8450-pdc - qcom,sm8550-pdc - qcom,sm8650-pdc + - qcom,sm8750-pdc - qcom,x1e80100-pdc - const: qcom,pdc diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml index 84976f17a4a1..c23b5c09fdb9 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml @@ -142,7 +142,7 @@ examples: <&cpu2_intc 11>, <&cpu3_intc 11>, <&cpu4_intc 11>; - reg = <0x28000000 0x4000>; + reg = <0x24000000 0x4000>; interrupt-controller; #interrupt-cells = <0>; msi-controller; diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index 7e1451f9786a..3dfe425909d1 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -59,6 +59,7 @@ properties: - enum: - canaan,k210-plic - sifive,fu540-c000-plic + - spacemit,k1-plic - starfive,jh7100-plic - starfive,jh7110-plic - const: sifive,plic-1.0.0 diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.txt index 422d6908f8b2..422d6908f8b2 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.txt diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index c1e11bc6b7a0..032fdc27127b 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -61,6 +61,7 @@ properties: - qcom,sm8450-smmu-500 - qcom,sm8550-smmu-500 - qcom,sm8650-smmu-500 + - qcom,sm8750-smmu-500 - qcom,x1e80100-smmu-500 - const: qcom,smmu-500 - const: arm,mmu-500 @@ -88,6 +89,7 @@ properties: items: - enum: - qcom,qcm2290-smmu-500 + - qcom,qcs615-smmu-500 - qcom,sa8255p-smmu-500 - qcom,sa8775p-smmu-500 - qcom,sar2130p-smmu-500 @@ -102,6 +104,7 @@ properties: - qcom,sm8450-smmu-500 - qcom,sm8550-smmu-500 - qcom,sm8650-smmu-500 + - qcom,sm8750-smmu-500 - qcom,x1e80100-smmu-500 - const: qcom,adreno-smmu - const: qcom,smmu-500 @@ -122,6 +125,7 @@ properties: - qcom,msm8996-smmu-v2 - qcom,sc7180-smmu-v2 - qcom,sdm630-smmu-v2 + - qcom,sdm670-smmu-v2 - qcom,sdm845-smmu-v2 - qcom,sm6350-smmu-v2 - qcom,sm7150-smmu-v2 @@ -474,6 +478,7 @@ allOf: items: - enum: - qcom,qcm2290-smmu-500 + - qcom,qcs615-smmu-500 - qcom,sm6115-smmu-500 - qcom,sm6125-smmu-500 - const: qcom,adreno-smmu @@ -550,6 +555,23 @@ allOf: - description: GPU SNoC bus clock - description: GPU AHB clock + - if: + properties: + compatible: + items: + - const: qcom,sm8750-smmu-500 + - const: qcom,adreno-smmu + - const: qcom,smmu-500 + - const: arm,mmu-500 + then: + properties: + clock-names: + items: + - const: hlos + clocks: + items: + - description: HLOS vote clock + # Disallow clocks for all other platforms with specific compatibles - if: properties: @@ -559,7 +581,6 @@ allOf: - cavium,smmu-v2 - marvell,ap806-smmu-500 - nvidia,smmu-500 - - qcom,qcs615-smmu-500 - qcom,qcs8300-smmu-500 - qcom,qdu1000-smmu-500 - qcom,sa8255p-smmu-500 diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml index f8cebc9e8cd9..5ae9a628261f 100644 --- a/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml @@ -21,6 +21,7 @@ properties: - items: - enum: - qcom,msm8916-iommu + - qcom,msm8917-iommu - qcom,msm8953-iommu - const: qcom,msm-iommu-v1 - items: diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml index 621dde0e45d8..6ce41d11ff5e 100644 --- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml +++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml @@ -25,6 +25,7 @@ properties: - rockchip,rk3568-iommu - items: - enum: + - rockchip,rk3576-iommu - rockchip,rk3588-iommu - const: rockchip,rk3568-iommu diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml index 34ef5215c150..f52f6304c79e 100644 --- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml @@ -23,6 +23,12 @@ properties: description: I2C slave address of the microcontroller. maxItems: 1 + interrupts: + description: + Specifier for the global LED brightness changed by front button press + interrupt. + maxItems: 1 + "#address-cells": const: 1 @@ -56,6 +62,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/leds/common.h> i2c { @@ -65,6 +72,7 @@ examples: led-controller@2b { compatible = "cznic,turris-omnia-leds"; reg = <0x2b>; + interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml index e850a8894758..bb40bb9e036e 100644 --- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml @@ -27,7 +27,7 @@ properties: description: | For multicolor LED support this property should be defined as either LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in - include/linux/leds/common.h. + include/dt-bindings/leds/common.h. enum: [ 8, 9 ] required: diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt deleted file mode 100644 index 8bb25749a3da..000000000000 --- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt +++ /dev/null @@ -1,50 +0,0 @@ -* Texas Instruments - lp8860 4-Channel LED Driver - -The LP8860-Q1 is an high-efficiency LED -driver with boost controller. It has 4 high-precision -current sinks that can be controlled by a PWM input -signal, a SPI/I2C master, or both. - -Required properties: - - compatible : - "ti,lp8860" - - reg : I2C slave address - - #address-cells : 1 - - #size-cells : 0 - -Optional properties: - - enable-gpios : gpio pin to enable (active high)/disable the device. - - vled-supply : LED supply - -Required child properties: - - reg : 0 - -Optional child properties: - - function : see Documentation/devicetree/bindings/leds/common.txt - - color : see Documentation/devicetree/bindings/leds/common.txt - - label : see Documentation/devicetree/bindings/leds/common.txt (deprecated) - - linux,default-trigger : - see Documentation/devicetree/bindings/leds/common.txt - -Example: - -#include <dt-bindings/leds/common.h> - -led-controller@2d { - compatible = "ti,lp8860"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x2d>; - enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; - vled-supply = <&vbatt>; - - led@0 { - reg = <0>; - function = LED_FUNCTION_BACKLIGHT; - color = <LED_COLOR_ID_WHITE>; - linux,default-trigger = "backlight"; - }; -} - -For more product information please see the link below: -https://www.ti.com/product/lp8860-q1 diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml index 1ba607685f5f..bcf0ad4ea57e 100644 --- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml +++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml @@ -23,6 +23,7 @@ properties: items: - enum: - qcom,pm6150l-flash-led + - qcom,pm660l-flash-led - qcom,pm8150c-flash-led - qcom,pm8150l-flash-led - qcom,pm8350c-flash-led diff --git a/Documentation/devicetree/bindings/leds/st,led1202.yaml b/Documentation/devicetree/bindings/leds/st,led1202.yaml new file mode 100644 index 000000000000..f1e5e4efaa3a --- /dev/null +++ b/Documentation/devicetree/bindings/leds/st,led1202.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/st,led1202.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST LED1202 LED controllers + +maintainers: + - Vicentiu Galanopulo <vicentiu.galanopulo@remote-tech.co.uk> + +description: | + The LED1202 is a 12-channel low quiescent current LED controller + programmable via I2C; The output current can be adjusted separately + for each channel by 8-bit analog and 12-bit digital dimming control. + Datasheet available at + https://www.st.com/en/power-management/led1202.html + +properties: + compatible: + const: st,led1202 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^led@[0-9a-f]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 11 + + required: + - reg + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@58 { + compatible = "st,led1202"; + reg = <0x58>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0x0>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + function-enumerator = <1>; + }; + + led@1 { + reg = <0x1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + function-enumerator = <2>; + }; + + led@2 { + reg = <0x2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + function-enumerator = <3>; + }; + + led@3 { + reg = <0x3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + function-enumerator = <4>; + }; + + led@4 { + reg = <0x4>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + function-enumerator = <5>; + }; + + led@5 { + reg = <0x5>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + function-enumerator = <6>; + }; + + led@6 { + reg = <0x6>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + function-enumerator = <7>; + }; + + led@7 { + reg = <0x7>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + function-enumerator = <8>; + }; + + led@8 { + reg = <0x8>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + function-enumerator = <9>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/leds/ti,lp8860.yaml b/Documentation/devicetree/bindings/leds/ti,lp8860.yaml new file mode 100644 index 000000000000..0ee357b02661 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/ti,lp8860.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/ti,lp8860.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments - lp8860 4-Channel LED Driver + +maintainers: + - Andrew Davis <afd@ti.com> + +description: | + The LP8860-Q1 is an high-efficiency LED driver with boost controller. + It has 4 high-precision current sinks that can be controlled by a PWM input + signal, a SPI/I2C master, or both. + + For more product information please see the link below: + https://www.ti.com/product/lp8860-q1 + +properties: + compatible: + const: ti,lp8860 + + reg: + maxItems: 1 + description: I2C slave address + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + enable-gpios: + maxItems: 1 + description: GPIO pin to enable (active high) / disable the device + + vled-supply: + description: LED supply + +patternProperties: + "^led(@[0-3])?$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + description: + Index of the LED. + maxItems: 1 + + function: true + color: true + label: true + linux,default-trigger: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@2d { + compatible = "ti,lp8860"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2d>; + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + vled-supply = <&vbatt>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + linux,default-trigger = "backlight"; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mailbox/google,gs101-mbox.yaml b/Documentation/devicetree/bindings/mailbox/google,gs101-mbox.yaml new file mode 100644 index 000000000000..e249db4c1fbc --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/google,gs101-mbox.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2024 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/google,gs101-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Mailbox Controller + +maintainers: + - Tudor Ambarus <tudor.ambarus@linaro.org> + +description: + The Samsung Exynos mailbox controller, used on Google GS101 SoC, has 16 flag + bits for hardware interrupt generation and a shared register for passing + mailbox messages. When the controller is used by the ACPM interface + the shared register is ignored and the mailbox controller acts as a doorbell. + The controller just raises the interrupt to the firmware after the + ACPM interface has written the message to SRAM. + +properties: + compatible: + const: google,gs101-mbox + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: pclk + + interrupts: + description: IRQ line for the RX mailbox. + maxItems: 1 + + '#mbox-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/google,gs101.h> + + soc { + #address-cells = <1>; + #size-cells = <1>; + + ap2apm_mailbox: mailbox@17610000 { + compatible = "google,gs101-mbox"; + reg = <0x17610000 0x1000>; + clocks = <&cmu_apm CLK_GOUT_APM_MAILBOX_APM_AP_PCLK>; + clock-names = "pclk"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml b/Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml new file mode 100644 index 000000000000..8ed67ea7c883 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/microchip,sbi-ipc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Inter-processor communication (IPC) mailbox controller + +maintainers: + - Valentina Fernandez <valentina.fernandezalanis@microchip.com> + +description: + The Microchip Inter-processor Communication (IPC) facilitates + message passing between processors using an interrupt signaling + mechanism. + +properties: + compatible: + oneOf: + - description: + Intended for use by software running in supervisor privileged + mode (s-mode). This SBI interface is compatible with the Mi-V + Inter-hart Communication (IHC) IP. + const: microchip,sbi-ipc + + - description: + Intended for use by the SBI implementation in machine mode + (m-mode), this compatible string is for the MIV_IHC Soft-IP. + const: microchip,miv-ihc-rtl-v2 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 5 + + interrupt-names: + minItems: 1 + maxItems: 5 + items: + enum: + - hart-0 + - hart-1 + - hart-2 + - hart-3 + - hart-4 + - hart-5 + + "#mbox-cells": + description: > + For "microchip,sbi-ipc", the cell represents the global "logical" + channel IDs. The meaning of channel IDs are platform firmware dependent. + + For "microchip,miv-ihc-rtl-v2", the cell represents the physical + channel and does not vary based on the platform firmware. + const: 1 + + microchip,ihc-chan-disabled-mask: + description: > + Represents the enable/disable state of the bi-directional IHC + channels within the MIV-IHC IP configuration. + + A bit set to '1' indicates that the corresponding channel is disabled, + and any read or write operations to that channel will return zero. + + A bit set to '0' indicates that the corresponding channel is enabled + and will be accessible through its dedicated address range registers. + + The actual enable/disable state of each channel is determined by the + IP block’s configuration. + $ref: /schemas/types.yaml#/definitions/uint16 + maximum: 0x7fff + default: 0 + +required: + - compatible + - interrupts + - interrupt-names + - "#mbox-cells" + +allOf: + - if: + properties: + compatible: + contains: + const: microchip,sbi-ipc + then: + properties: + reg: + not: {} + description: + The 'microchip,sbi-ipc' operates in a programming model + that does not require memory-mapped I/O (MMIO) registers + since it uses SBI ecalls provided by the m-mode/firmware + SBI implementation to access hardware registers. + microchip,ihc-chan-disabled-mask: false + else: + required: + - reg + - microchip,ihc-chan-disabled-mask + +additionalProperties: false + +examples: + - | + mailbox { + compatible = "microchip,sbi-ipc"; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>; + interrupt-names = "hart-1", "hart-2", "hart-3"; + #mbox-cells = <1>; + }; + - | + mailbox@50000000 { + compatible = "microchip,miv-ihc-rtl-v2"; + microchip,ihc-chan-disabled-mask = /bits/ 16 <0>; + reg = <0x50000000 0x1c000>; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>; + interrupt-names = "hart-1", "hart-2", "hart-3"; + #mbox-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml index 9d2dfd85b207..78f68dacd028 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml @@ -20,6 +20,7 @@ properties: - enum: - qcom,ipq5018-apcs-apps-global - qcom,ipq5332-apcs-apps-global + - qcom,ipq5424-apcs-apps-global - qcom,ipq8074-apcs-apps-global - qcom,ipq9574-apcs-apps-global - const: qcom,ipq6018-apcs-apps-global @@ -44,6 +45,7 @@ properties: - const: qcom,msm8994-apcs-kpss-global - items: - enum: + - qcom,qcs615-apss-shared - qcom,sc7180-apss-shared - qcom,sc8180x-apss-shared - qcom,sm8150-apss-shared diff --git a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml index a4f06bbdfe49..8ba5177ac631 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/allwinner,sun50i-h6-vpu-g2.yaml# diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml index 377acce93423..6da8a6aded23 100644 --- a/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/amlogic,meson-ir-tx.yaml# diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml index 9801de3ed84e..5a920d9e78c7 100644 --- a/Documentation/devicetree/bindings/media/amphion,vpu.yaml +++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/amphion,vpu.yaml# diff --git a/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml b/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml index 84a5e894ace4..3f47744459aa 100644 --- a/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml +++ b/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/fsl,imx6ull-pxp.yaml# diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml index bf05ca48601a..fa69bd21c8da 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml @@ -33,6 +33,8 @@ properties: - sony,imx290lqr # Colour - sony,imx290llr # Monochrome - sony,imx327lqr # Colour + - sony,imx462lqr # Colour + - sony,imx462llr # Monochrome - const: sony,imx290 deprecated: true diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml index b401c67e3ba0..d726d141a434 100644 --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/mediatek,vcodec-decoder.yaml# diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml index b45743d0a9ec..110e8f5f1f9e 100644 --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/mediatek,vcodec-encoder.yaml# diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml index a500a585c692..5865e6f0be89 100644 --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/mediatek,vcodec-subdev-decoder.yaml# diff --git a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml index 59b805ca47c5..ede086d55add 100644 --- a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml +++ b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/microchip,sama5d4-vdec.yaml# @@ -36,12 +35,12 @@ additionalProperties: false examples: - | - #include <dt-bindings/clock/at91.h> - #include <dt-bindings/interrupt-controller/irq.h> - - vdec0: vdec@300000 { - compatible = "microchip,sama5d4-vdec"; - reg = <0x00300000 0x100000>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; - }; + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + + vdec@300000 { + compatible = "microchip,sama5d4-vdec"; + reg = <0x00300000 0x100000>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + }; diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml index 4d5348d456a1..f43b91984f01 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml @@ -21,6 +21,7 @@ properties: enum: - fsl,imx8mn-isi - fsl,imx8mp-isi + - fsl,imx8ulp-isi - fsl,imx93-isi reg: @@ -75,6 +76,7 @@ allOf: contains: enum: - fsl,imx8mn-isi + - fsl,imx8ulp-isi - fsl,imx93-isi then: properties: diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml index 3d58f02b0c5d..19528262810a 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml# @@ -44,26 +43,26 @@ additionalProperties: false examples: - | - #include <dt-bindings/clock/imx8mq-clock.h> - #include <dt-bindings/power/imx8mq-power.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/power/imx8mq-power.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> - vpu_g1: video-codec@38300000 { - compatible = "nxp,imx8mq-vpu-g1"; - reg = <0x38300000 0x10000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>; - power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>; - }; + video-codec@38300000 { + compatible = "nxp,imx8mq-vpu-g1"; + reg = <0x38300000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>; + power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>; + }; - | - #include <dt-bindings/clock/imx8mq-clock.h> - #include <dt-bindings/power/imx8mq-power.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/power/imx8mq-power.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> - vpu_g2: video-codec@38300000 { - compatible = "nxp,imx8mq-vpu-g2"; - reg = <0x38310000 0x10000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>; - power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>; - }; + video-codec@38300000 { + compatible = "nxp,imx8mq-vpu-g2"; + reg = <0x38310000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>; + power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml index 9cc0a968a401..3469a43f00d4 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/qcom,msm8916-camss.yaml# diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml index 9410f13ca97c..da140c2e3d3f 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml @@ -45,6 +45,7 @@ properties: required: - compatible + deprecated: true additionalProperties: false video-encoder: @@ -57,13 +58,12 @@ properties: required: - compatible + deprecated: true additionalProperties: false required: - compatible - iommus - - video-decoder - - video-encoder unevaluatedProperties: false @@ -83,12 +83,4 @@ examples: power-domains = <&gcc VENUS_GDSC>; iommus = <&apps_iommu 5>; memory-region = <&venus_mem>; - - video-decoder { - compatible = "venus-decoder"; - }; - - video-encoder { - compatible = "venus-encoder"; - }; }; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml index 5cb0e337ea6e..644646de338a 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml# diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml index 5cec1d077cda..83c4a5d95f02 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml @@ -70,6 +70,7 @@ properties: required: - compatible + deprecated: true additionalProperties: false video-encoder: @@ -82,14 +83,13 @@ properties: required: - compatible + deprecated: true additionalProperties: false required: - compatible - power-domain-names - iommus - - video-decoder - - video-encoder unevaluatedProperties: false @@ -114,12 +114,4 @@ examples: "vcodec0_core", "vcodec0_bus"; iommus = <&apps_smmu 0x0c00 0x60>; memory-region = <&venus_mem>; - - video-decoder { - compatible = "venus-decoder"; - }; - - video-encoder { - compatible = "venus-encoder"; - }; }; diff --git a/Documentation/devicetree/bindings/media/qcom,sc7280-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc7280-camss.yaml new file mode 100644 index 000000000000..e11141b812a0 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sc7280-camss.yaml @@ -0,0 +1,425 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sc7280-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7280 CAMSS ISP + +maintainers: + - Azam Sadiq Pasha Kapatrala Syed <akapatra@quicinc.com> + - Hariram Purushothaman <hariramp@quicinc.com> + +description: + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms. + +properties: + compatible: + const: qcom,sc7280-camss + + reg: + maxItems: 15 + + reg-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid_lite0 + - const: csid_lite1 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: csiphy4 + - const: vfe0 + - const: vfe1 + - const: vfe2 + - const: vfe_lite0 + - const: vfe_lite1 + + clocks: + maxItems: 33 + + clock-names: + items: + - const: camnoc_axi + - const: cpas_ahb + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy2 + - const: csiphy2_timer + - const: csiphy3 + - const: csiphy3_timer + - const: csiphy4 + - const: csiphy4_timer + - const: gcc_camera_ahb + - const: gcc_cam_hf_axi + - const: icp_ahb + - const: vfe0 + - const: vfe0_axi + - const: vfe0_cphy_rx + - const: vfe0_csid + - const: vfe1 + - const: vfe1_axi + - const: vfe1_cphy_rx + - const: vfe1_csid + - const: vfe2 + - const: vfe2_axi + - const: vfe2_cphy_rx + - const: vfe2_csid + - const: vfe_lite0 + - const: vfe_lite0_cphy_rx + - const: vfe_lite0_csid + - const: vfe_lite1 + - const: vfe_lite1_cphy_rx + - const: vfe_lite1_csid + + interrupts: + maxItems: 15 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid_lite0 + - const: csid_lite1 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: csiphy4 + - const: vfe0 + - const: vfe1 + - const: vfe2 + - const: vfe_lite0 + - const: vfe_lite1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: ahb + - const: hf_0 + + iommus: + maxItems: 1 + + power-domains: + items: + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller. + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. + + power-domain-names: + items: + - const: ife0 + - const: ife1 + - const: ife2 + - const: top + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data on CSIPHY 0. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data on CSIPHY 1. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data on CSIPHY 2. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data on CSIPHY 3. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@4: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data on CSIPHY 4. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - interconnects + - interconnect-names + - iommus + - power-domains + - power-domain-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,camcc-sc7280.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/interconnect/qcom,sc7280.h> + #include <dt-bindings/interconnect/qcom,icc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + isp@acb3000 { + compatible = "qcom,sc7280-camss"; + + reg = <0x0 0x0acb3000 0x0 0x1000>, + <0x0 0x0acba000 0x0 0x1000>, + <0x0 0x0acc1000 0x0 0x1000>, + <0x0 0x0acc8000 0x0 0x1000>, + <0x0 0x0accf000 0x0 0x1000>, + <0x0 0x0ace0000 0x0 0x2000>, + <0x0 0x0ace2000 0x0 0x2000>, + <0x0 0x0ace4000 0x0 0x2000>, + <0x0 0x0ace6000 0x0 0x2000>, + <0x0 0x0ace8000 0x0 0x2000>, + <0x0 0x0acaf000 0x0 0x4000>, + <0x0 0x0acb6000 0x0 0x4000>, + <0x0 0x0acbd000 0x0 0x4000>, + <0x0 0x0acc4000 0x0 0x4000>, + <0x0 0x0accb000 0x0 0x4000>; + reg-names = "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&camcc CAM_CC_ICP_AHB_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_AXI_CLK>, + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_0_CSID_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_AXI_CLK>, + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_1_CSID_CLK>, + <&camcc CAM_CC_IFE_2_CLK>, + <&camcc CAM_CC_IFE_2_AXI_CLK>, + <&camcc CAM_CC_IFE_2_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_2_CSID_CLK>, + <&camcc CAM_CC_IFE_LITE_0_CLK>, + <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>, + <&camcc CAM_CC_IFE_LITE_1_CLK>, + <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "csiphy4", + "csiphy4_timer", + "gcc_camera_ahb", + "gcc_cam_hf_axi", + "icp_ahb", + "vfe0", + "vfe0_axi", + "vfe0_cphy_rx", + "vfe0_csid", + "vfe1", + "vfe1_axi", + "vfe1_cphy_rx", + "vfe1_csid", + "vfe2", + "vfe2_axi", + "vfe2_cphy_rx", + "vfe2_csid", + "vfe_lite0", + "vfe_lite0_cphy_rx", + "vfe_lite0_csid", + "vfe_lite1", + "vfe_lite1_cphy_rx", + "vfe_lite1_csid"; + + interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc2 SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ahb", + "hf_0"; + + iommus = <&apps_smmu 0x800 0x4e0>; + + power-domains = <&camcc CAM_CC_IFE_0_GDSC>, + <&camcc CAM_CC_IFE_1_GDSC>, + <&camcc CAM_CC_IFE_2_GDSC>, + <&camcc CAM_CC_TITAN_TOP_GDSC>; + power-domain-names = "ife0", + "ife1", + "ife2", + "top"; + + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml index 10c334e6b3dc..413c5b4ee650 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml @@ -68,6 +68,7 @@ properties: required: - compatible + deprecated: true additionalProperties: false video-encoder: @@ -80,14 +81,13 @@ properties: required: - compatible + deprecated: true additionalProperties: false required: - compatible - power-domain-names - iommus - - video-decoder - - video-encoder unevaluatedProperties: false @@ -125,14 +125,6 @@ examples: memory-region = <&video_mem>; - video-decoder { - compatible = "venus-decoder"; - }; - - video-encoder { - compatible = "venus-encoder"; - }; - video-firmware { iommus = <&apps_smmu 0x21a2 0x0>; }; diff --git a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml index c0bc31709873..9936f0132417 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml @@ -328,26 +328,26 @@ examples: vdda-phy-supply = <&vreg_l6d>; vdda-pll-supply = <&vreg_l4d>; - interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 762 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 764 IRQ_TYPE_EDGE_RISING>; interrupt-names = "csid1_lite", "vfe_lite1", diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml index 584106e275f6..68d8670557f5 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml# diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml index ec4380a0a03f..289494f561e5 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml# @@ -296,16 +295,16 @@ examples: "vfe_lite_cphy_rx", "vfe_lite_src"; - interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>; interrupt-names = "csid0", "csid1", diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml index 6228fd2b3246..c839cb1ebc09 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml @@ -70,6 +70,7 @@ properties: required: - compatible + deprecated: true additionalProperties: false video-core1: @@ -82,14 +83,13 @@ properties: required: - compatible + deprecated: true additionalProperties: false required: - compatible - power-domain-names - iommus - - video-core0 - - video-core1 unevaluatedProperties: false @@ -119,12 +119,4 @@ examples: iommus = <&apps_smmu 0x10a0 0x8>, <&apps_smmu 0x10b0 0x0>; memory-region = <&venus_mem>; - - video-core0 { - compatible = "venus-decoder"; - }; - - video-core1 { - compatible = "venus-encoder"; - }; }; diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml index fa5073c0fd1e..a372d991e652 100644 --- a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml# @@ -329,20 +328,20 @@ examples: vdda-phy-supply = <&vreg_l5a_0p88>; vdda-pll-supply = <&vreg_l9a_1p2>; - interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>; interrupt-names = "csiphy0", "csiphy1", "csiphy2", diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml index f66033ae8b59..da54493220c9 100644 --- a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml @@ -73,6 +73,7 @@ properties: required: - compatible + deprecated: true additionalProperties: false video-encoder: @@ -85,6 +86,7 @@ properties: required: - compatible + deprecated: true additionalProperties: false required: @@ -95,8 +97,6 @@ required: - iommus - resets - reset-names - - video-decoder - - video-encoder unevaluatedProperties: false @@ -132,12 +132,4 @@ examples: resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>, <&videocc VIDEO_CC_MVS0C_CLK_ARES>; reset-names = "bus", "core"; - - video-decoder { - compatible = "venus-decoder"; - }; - - video-encoder { - compatible = "venus-encoder"; - }; }; diff --git a/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml index 947ad699cc5e..d246f5d38427 100644 --- a/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml +++ b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/rockchip,rk3568-vepu.yaml# diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml index 719aeb2dc593..8c2501634080 100644 --- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml @@ -1,5 +1,4 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- $id: http://devicetree.org/schemas/media/rockchip-vpu.yaml# @@ -92,18 +91,18 @@ additionalProperties: false examples: - | - #include <dt-bindings/clock/rk3288-cru.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/power/rk3288-power.h> - - vpu: video-codec@ff9a0000 { - compatible = "rockchip,rk3288-vpu"; - reg = <0xff9a0000 0x800>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vepu", "vdpu"; - clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; - clock-names = "aclk", "hclk"; - power-domains = <&power RK3288_PD_VIDEO>; - iommus = <&vpu_mmu>; - }; + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3288-power.h> + + video-codec@ff9a0000 { + compatible = "rockchip,rk3288-vpu"; + reg = <0xff9a0000 0x800>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "hclk"; + power-domains = <&power RK3288_PD_VIDEO>; + iommus = <&vpu_mmu>; + }; diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml index 87731f3ce7bd..7b03a77adbce 100644 --- a/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml @@ -12,7 +12,9 @@ maintainers: properties: compatible: - const: st,stm32mp13-dcmipp + enum: + - st,stm32mp13-dcmipp + - st,stm32mp25-dcmipp reg: maxItems: 1 @@ -21,11 +23,24 @@ properties: maxItems: 1 clocks: - maxItems: 1 + items: + - description: bus clock + - description: csi clock + minItems: 1 + + clock-names: + items: + - const: kclk + - const: mclk + minItems: 1 resets: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + port: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false @@ -39,7 +54,7 @@ properties: properties: bus-type: - enum: [5, 6] + enum: [4, 5, 6] default: 5 bus-width: @@ -50,9 +65,6 @@ properties: hsync-active: true vsync-active: true - required: - - pclk-sample - required: - compatible - reg @@ -61,6 +73,35 @@ required: - resets - port +allOf: + - if: + properties: + compatible: + contains: + enum: + - st,stm32mp13-dcmipp + then: + properties: + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + port: + properties: + endpoint: + properties: + bus-type: + enum: [5, 6] + else: + properties: + clocks: + minItems: 2 + + clock-names: + minItems: 2 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/media/st,stm32mp25-csi.yaml b/Documentation/devicetree/bindings/media/st,stm32mp25-csi.yaml new file mode 100644 index 000000000000..33bedfe41924 --- /dev/null +++ b/Documentation/devicetree/bindings/media/st,stm32mp25-csi.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/st,stm32mp25-csi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 CSI controller + +description: + The STM32 CSI controller allows connecting a CSI based + camera to the DCMIPP camera pipeline. + +maintainers: + - Alain Volmat <alain.volmat@foss.st.com> + +properties: + compatible: + enum: + - st,stm32mp25-csi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: pclk + - const: txesc + - const: csi2phy + + resets: + maxItems: 1 + + vdd-supply: + description: Digital core power supply (0.91V) + + vdda18-supply: + description: System analog power supply (1.8V) + + access-controllers: + minItems: 1 + maxItems: 2 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + items: + - const: 1 + - const: 2 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port node + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/st,stm32mp25-rcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/media/video-interfaces.h> + #include <dt-bindings/reset/st,stm32mp25-rcc.h> + csi@48020000 { + compatible = "st,stm32mp25-csi"; + reg = <0x48020000 0x2000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc CSI_R>; + clocks = <&rcc CK_KER_CSI>, <&rcc CK_KER_CSITXESC>, <&rcc CK_KER_CSIPHY>; + clock-names = "pclk", "txesc", "csi2phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&imx335_ep>; + data-lanes = <1 2>; + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dcmipp_0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml index 26e3e7d7c67b..038e85b45bef 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.yaml +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml @@ -210,6 +210,27 @@ properties: lane-polarities property is omitted, the value must be interpreted as 0 (normal). This property is valid for serial busses only. + line-orders: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + enum: + - 0 # ABC + - 1 # ACB + - 2 # BAC + - 3 # BCA + - 4 # CAB + - 5 # CBA + description: + An array of line orders of the CSI-2 C-PHY data lanes. The order of the + lanes are the same as in data-lanes property. Valid values are 0-5 as + defined in the MIPI Discovery and Configuration (DisCo) Specification for + Imaging. The length of the array must be the same length as the + data-lanes property. If the line-orders property is omitted, the value + shall be interpreted as 0 (ABC). This property is valid for CSI-2 C-PHY + busses only. + strobe: $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 0, 1 ] diff --git a/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml index 0c511ab906bf..8b937f90a1fb 100644 --- a/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml @@ -52,10 +52,3 @@ examples: #qca,ddr-wb-channel-cells = <1>; }; - - interrupt-controller { - // ... - qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; - qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, - <&ddr_ctrl 0>, <&ddr_ctrl 1>; - }; diff --git a/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-gpbr.yaml b/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-gpbr.yaml new file mode 100644 index 000000000000..f805545aa62a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-gpbr.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,at91sam9260-gpbr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip AT91 General Purpose Backup Registers + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + +description: + The system controller embeds 256 bits of General Purpose Backup + registers organized as 8 32-bit registers. + +properties: + compatible: + oneOf: + - items: + - enum: + - atmel,at91sam9260-gpbr + - const: syscon + - items: + - enum: + - microchip,sam9x60-gpbr + - microchip,sam9x7-gpbr + - const: atmel,at91sam9260-gpbr + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@fffffd50 { + compatible = "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffd50 0x10>; + }; diff --git a/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-matrix.yaml b/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-matrix.yaml new file mode 100644 index 000000000000..447b3a3edbfc --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-matrix.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,at91sam9260-matrix.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip AT91 Bus Matrix + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + +description: + The Bus Matrix (MATRIX) implements a multi-layer AHB, based on the + AHB-Lite protocol, that enables parallel access paths between multiple + masters and slaves in a system, thus increasing the overall bandwidth. + +properties: + compatible: + oneOf: + - items: + - enum: + - atmel,at91sam9260-matrix + - atmel,at91sam9261-matrix + - atmel,at91sam9263-matrix + - atmel,at91sam9rl-matrix + - atmel,at91sam9g45-matrix + - atmel,at91sam9n12-matrix + - atmel,at91sam9x5-matrix + - atmel,sama5d3-matrix + - const: syscon + - items: + - enum: + - microchip,sam9x60-matrix + - microchip,sam9x7-matrix + - const: atmel,at91sam9x5-matrix + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@ffffec00 { + compatible = "atmel,sama5d3-matrix", "syscon"; + reg = <0xffffec00 0x200>; + }; diff --git a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt deleted file mode 100644 index 3c989d1760a2..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Device tree bindings for Atmel GPBR (General Purpose Backup Registers) - -The GPBR are a set of battery-backed registers. - -Required properties: -- compatible: Should be one of the following: - "atmel,at91sam9260-gpbr", "syscon" - "microchip,sam9x60-gpbr", "syscon" - "microchip,sam9x7-gpbr", "microchip,sam9x60-gpbr", "syscon" -- reg: contains offset/length value of the GPBR memory - region. - -Example: - -gpbr: gpbr@fffffd50 { - compatible = "atmel,at91sam9260-gpbr", "syscon"; - reg = <0xfffffd50 0x10>; -}; diff --git a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt deleted file mode 100644 index 6e5f83614e83..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Device tree bindings for Atmel Bus Matrix - -The Bus Matrix registers are used to configure Atmel SoCs internal bus -behavior (master/slave priorities, undefined burst length type, ...) - -Required properties: -- compatible: Should be one of the following - "atmel,at91sam9260-matrix", "syscon" - "atmel,at91sam9261-matrix", "syscon" - "atmel,at91sam9263-matrix", "syscon" - "atmel,at91sam9rl-matrix", "syscon" - "atmel,at91sam9g45-matrix", "syscon" - "atmel,at91sam9n12-matrix", "syscon" - "atmel,at91sam9x5-matrix", "syscon" - "atmel,sama5d3-matrix", "syscon" - "microchip,sam9x60-matrix", "syscon" - "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon" -- reg: Contains offset/length value of the Bus Matrix - memory region. - -Example: - -matrix: matrix@ffffec00 { - compatible = "atmel,sama5d3-matrix", "syscon"; - reg = <0xffffec00 0x200>; -}; diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index aac8819bd00b..50f457090066 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -108,9 +108,6 @@ properties: pwm: $ref: /schemas/pwm/google,cros-ec-pwm.yaml# - kbd-led-backlight: - $ref: /schemas/chrome/google,cros-kbd-led-backlight.yaml# - keyboard-controller: $ref: /schemas/input/google,cros-ec-keyb.yaml# diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml index 86451f151a6a..6a89b479d10f 100644 --- a/Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml @@ -36,6 +36,7 @@ properties: - enum: - mediatek,mt6323 - mediatek,mt6331 # "mediatek,mt6331" for PMIC MT6331 and MT6332. + - mediatek,mt6328 - mediatek,mt6358 - mediatek,mt6359 - mediatek,mt6397 @@ -88,6 +89,7 @@ properties: oneOf: - enum: - mediatek,mt6323-regulator + - mediatek,mt6328-regulator - mediatek,mt6358-regulator - mediatek,mt6359-regulator - mediatek,mt6397-regulator diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml index 79add913e35c..a503b67f2dbe 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml @@ -42,6 +42,7 @@ properties: - qcom,tcsr-apq8064 - qcom,tcsr-apq8084 - qcom,tcsr-ipq5332 + - qcom,tcsr-ipq5424 - qcom,tcsr-ipq6018 - qcom,tcsr-ipq8064 - qcom,tcsr-ipq8074 diff --git a/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml b/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml new file mode 100644 index 000000000000..877078ac172f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qnap,ts433-mcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QNAP NAS on-board Microcontroller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: + QNAP embeds a microcontroller on their NAS devices adding system feature + as PWM Fan control, additional LEDs, power button status and more. + +properties: + compatible: + enum: + - qnap,ts433-mcu + +patternProperties: + "^fan-[0-9]+$": + $ref: /schemas/hwmon/fan-common.yaml# + unevaluatedProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + uart { + mcu { + compatible = "qnap,ts433-mcu"; + + fan-0 { + #cooling-cells = <2>; + cooling-levels = <0 64 89 128 166 204 221 238>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml index bb81307dc11b..4fc78efaa550 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml @@ -50,15 +50,15 @@ properties: minimum: 0 maximum: 1 - rohm,charger-sense-resistor-ohms: - minimum: 10000000 - maximum: 50000000 + rohm,charger-sense-resistor-micro-ohms: + minimum: 10000 + maximum: 50000 description: | - BD71827 and BD71828 have SAR ADC for measuring charging currents. - External sense resistor (RSENSE in data sheet) should be used. If - something other but 30MOhm resistor is used the resistance value - should be given here in Ohms. - default: 30000000 + BD71815 has SAR ADC for measuring charging currents. External sense + resistor (RSENSE in data sheet) should be used. If something other + but a 30 mOhm resistor is used the resistance value should be given + here in micro Ohms. + default: 30000 regulators: $ref: /schemas/regulator/rohm,bd71815-regulator.yaml @@ -67,7 +67,7 @@ properties: gpio-reserved-ranges: description: | - Usage of BD71828 GPIO pins can be changed via OTP. This property can be + Usage of BD71815 GPIO pins can be changed via OTP. This property can be used to mark the pins which should not be configured for GPIO. Please see the ../gpio/gpio.txt for more information. @@ -113,7 +113,7 @@ examples: gpio-controller; #gpio-cells = <2>; - rohm,charger-sense-resistor-ohms = <10000000>; + rohm,charger-sense-resistor-micro-ohms = <10000>; regulators { buck1: buck1 { diff --git a/Documentation/devicetree/bindings/mfd/sprd,sc2731.yaml b/Documentation/devicetree/bindings/mfd/sprd,sc2731.yaml index 8beec7e8e4c6..b023e1ef8d3c 100644 --- a/Documentation/devicetree/bindings/mfd/sprd,sc2731.yaml +++ b/Documentation/devicetree/bindings/mfd/sprd,sc2731.yaml @@ -67,15 +67,7 @@ patternProperties: "^efuse@[0-9a-f]+$": type: object - additionalProperties: true - properties: - compatible: - enum: - - sprd,sc2720-efuse - - sprd,sc2721-efuse - - sprd,sc2723-efuse - - sprd,sc2730-efuse - - sprd,sc2731-efuse + $ref: /schemas/nvmem/sprd,sc2731-efuse.yaml# "^fuel-gauge@[0-9a-f]+$": type: object @@ -199,7 +191,7 @@ examples: }; }; - adc@480 { + pmic_adc: adc@480 { compatible = "sprd,sc2731-adc"; reg = <0x480>; interrupt-parent = <&sc2731_pmic>; diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index b414de4fa779..4d67ff26d445 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -27,7 +27,7 @@ select: compatible: contains: enum: - - al,alpine-sysfabric-servic + - al,alpine-sysfabric-service - allwinner,sun8i-a83t-system-controller - allwinner,sun8i-h3-system-controller - allwinner,sun8i-v3s-system-controller @@ -103,6 +103,7 @@ select: - rockchip,rk3288-qos - rockchip,rk3368-qos - rockchip,rk3399-qos + - rockchip,rk3562-qos - rockchip,rk3568-qos - rockchip,rk3576-qos - rockchip,rk3588-qos @@ -201,6 +202,7 @@ properties: - rockchip,rk3288-qos - rockchip,rk3368-qos - rockchip,rk3399-qos + - rockchip,rk3562-qos - rockchip,rk3568-qos - rockchip,rk3576-qos - rockchip,rk3588-qos @@ -213,6 +215,7 @@ properties: - ti,am625-dss-oldi-io-ctrl - ti,am62p-cpsw-mac-efuse - ti,am654-dss-oldi-io-ctrl + - ti,j784s4-acspcie-proxy-ctrl - ti,j784s4-pcie-ctrl - ti,keystone-pllctrl - const: syscon diff --git a/Documentation/devicetree/bindings/misc/lwn,bk4-spi.yaml b/Documentation/devicetree/bindings/misc/lwn,bk4-spi.yaml new file mode 100644 index 000000000000..73fbf672e22a --- /dev/null +++ b/Documentation/devicetree/bindings/misc/lwn,bk4-spi.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/lwn,bk4-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Liebherr's BK4 external SPI controller + +maintainers: + - Lukasz Majewski <lukma@denx.de> + +description: | + Liebherr's BK4 external SPI controller is a device which handles data + acquisition from compatible industrial peripherals. + The SPI is used for data and management purposes in both master and + slave modes. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: lwn,bk4-spi + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 30000000 + + fsl,spi-cs-sck-delay: true + + fsl,spi-sck-cs-delay: true + +required: + - compatible + - spi-max-frequency + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + spidev@0 { + compatible = "lwn,bk4-spi"; + reg = <0>; + spi-max-frequency = <30000000>; + fsl,spi-cs-sck-delay = <200>; + fsl,spi-sck-cs-delay = <400>; + }; + }; diff --git a/Documentation/devicetree/bindings/misc/lwn-bk4.txt b/Documentation/devicetree/bindings/misc/lwn-bk4.txt deleted file mode 100644 index d6a8c188c087..000000000000 --- a/Documentation/devicetree/bindings/misc/lwn-bk4.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Liebherr's BK4 controller external SPI - -A device which handles data acquisition from compatible industrial -peripherals. -The SPI is used for data and management purposes in both master and -slave modes. - -Required properties: - -- compatible : Should be "lwn,bk4" - -Required SPI properties: - -- reg : Should be address of the device chip select within - the controller. - -- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be - 30MHz at most for the Liebherr's BK4 external bus. - -Example: - -spidev0: spi@0 { - compatible = "lwn,bk4"; - spi-max-frequency = <30000000>; - reg = <0>; -}; diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt deleted file mode 100644 index 8765c605e6bc..000000000000 --- a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt +++ /dev/null @@ -1,54 +0,0 @@ -* Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller - -The highspeed MMC host controller on Amlogic SoCs provides an interface -for MMC, SD, SDIO and SDHC types of memory cards. - -Supported maximum speeds are the ones of the eMMC standard 4.41 as well -as the speed of SD standard 2.0. - -The hardware provides an internal "mux" which allows up to three slots -to be controlled. Only one slot can be accessed at a time. - -Required properties: - - compatible : must be one of - - "amlogic,meson8-sdio" - - "amlogic,meson8b-sdio" - along with the generic "amlogic,meson-mx-sdio" - - reg : mmc controller base registers - - interrupts : mmc controller interrupt - - #address-cells : must be 1 - - size-cells : must be 0 - - clocks : phandle to clock providers - - clock-names : must contain "core" and "clkin" - -Required child nodes: -A node for each slot provided by the MMC controller is required. -NOTE: due to a driver limitation currently only one slot (= child node) - is supported! - -Required properties on each child node (= slot): - - compatible : must be "mmc-slot" (see mmc.txt within this directory) - - reg : the slot (or "port") ID - -Optional properties on each child node (= slot): - - bus-width : must be 1 or 4 (8-bit bus is not supported) - - for cd and all other additional generic mmc parameters - please refer to mmc.txt within this directory - -Examples: - mmc@c1108c20 { - compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; - reg = <0xc1108c20 0x20>; - interrupts = <0 28 1>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; - clock-names = "core", "clkin"; - - slot@1 { - compatible = "mmc-slot"; - reg = <1>; - - bus-width = <4>; - }; - }; diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.yaml new file mode 100644 index 000000000000..022682a977c6 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/amlogic,meson-mx-sdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller + +description: | + The highspeed MMC host controller on Amlogic SoCs provides an interface + for MMC, SD, SDIO and SDHC types of memory cards. + + Supported maximum speeds are the ones of the eMMC standard 4.41 as well + as the speed of SD standard 2.0. + + The hardware provides an internal "mux" which allows up to three slots + to be controlled. Only one slot can be accessed at a time. + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + items: + - enum: + - amlogic,meson8-sdio + - amlogic,meson8b-sdio + - const: amlogic,meson-mx-sdio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: clkin + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "slot@[0-2]$": + $ref: mmc-slot.yaml# + description: + A node for each slot provided by the MMC controller + + properties: + reg: + enum: [0, 1, 2] + + bus-width: + enum: [1, 4] + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + mmc@c1108c20 { + compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; + reg = <0xc1108c20 0x20>; + interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>; + clocks = <&clk_core>, <&clk_in>; + clock-names = "core", "clkin"; + #address-cells = <1>; + #size-cells = <0>; + + slot@1 { + compatible = "mmc-slot"; + reg = <1>; + bus-width = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/atmel,sama5d2-sdhci.yaml b/Documentation/devicetree/bindings/mmc/atmel,sama5d2-sdhci.yaml index 8c8ade88e8fe..ba75623b7778 100644 --- a/Documentation/devicetree/bindings/mmc/atmel,sama5d2-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/atmel,sama5d2-sdhci.yaml @@ -22,6 +22,7 @@ properties: - items: - enum: - microchip,sam9x7-sdhci + - microchip,sama7d65-sdhci - microchip,sama7g5-sdhci - const: microchip,sam9x60-sdhci diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml index cfe6237716f4..3f48d8292d5b 100644 --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml @@ -38,15 +38,9 @@ properties: reg: minItems: 1 - maxItems: 2 - description: | - For "marvell,armada-3700-sdhci", two register areas. The first one - for Xenon IP register. The second one for the Armada 3700 SoC PHY PAD - Voltage Control register. Please follow the examples with compatible - "marvell,armada-3700-sdhci" in below. - Please also check property marvell,pad-type in below. - - For other compatible strings, one register area for Xenon IP. + items: + - description: Xenon IP registers + - description: Armada 3700 SoC PHY PAD Voltage Control register clocks: minItems: 1 @@ -61,6 +55,17 @@ properties: interrupts: maxItems: 1 + marvell,pad-type: + $ref: /schemas/types.yaml#/definitions/string + enum: + - sd + - fixed-1-8v + description: + Type of Armada 3700 SoC PHY PAD Voltage Controller register. If "sd" is + selected, SoC PHY PAD is set as 3.3V at the beginning and is switched to + 1.8V when later in higher speed mode. If "fixed-1-8v" is selected, SoC PHY + PAD is fixed 1.8V, such as for eMMC. + marvell,xenon-sdhc-id: $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 @@ -147,27 +152,18 @@ allOf: then: properties: reg: - items: - - description: Xenon IP registers - - description: Armada 3700 SoC PHY PAD Voltage Control register - - marvell,pad-type: - $ref: /schemas/types.yaml#/definitions/string - enum: - - sd - - fixed-1-8v - description: | - Type of Armada 3700 SoC PHY PAD Voltage Controller register. - If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning - and is switched to 1.8V when later in higher speed mode. - If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for - eMMC. - Please follow the examples with compatible - "marvell,armada-3700-sdhci" in below. + minItems: 2 required: - marvell,pad-type + else: + properties: + reg: + maxItems: 1 + + marvell,pad-type: false + - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml new file mode 100644 index 000000000000..9a7235439759 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml @@ -0,0 +1,357 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mmc-controller-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MMC Controller & Slots Common Properties + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +description: + These properties are common to multiple MMC host controllers and the + possible slots or ports for multi-slot controllers. + +properties: + "#address-cells": + const: 1 + description: + The cell is the SDIO function number if a function subnode is used. + + "#size-cells": + const: 0 + + # Card Detection. + # If none of these properties are supplied, the host native card + # detect will be used. Only one of them should be provided. + + broken-cd: + $ref: /schemas/types.yaml#/definitions/flag + description: + There is no card detection available; polling must be used. + + cd-gpios: + maxItems: 1 + description: + The card detection will be done using the GPIO provided. + + non-removable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Non-removable slot (like eMMC); assume always present. + + # *NOTE* on CD and WP polarity. To use common for all SD/MMC host + # controllers line polarity properties, we have to fix the meaning + # of the "normal" and "inverted" line levels. We choose to follow + # the SDHCI standard, which specifies both those lines as "active + # low." Therefore, using the "cd-inverted" property means, that the + # CD line is active high, i.e. it is high, when a card is + # inserted. Similar logic applies to the "wp-inverted" property. + # + # CD and WP lines can be implemented on the hardware in one of two + # ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or + # as dedicated pins. Polarity of dedicated pins can be specified, + # using *-inverted properties. GPIO polarity can also be specified + # using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the + # latter case. We choose to use the XOR logic for GPIO CD and WP + # lines. This means, the two properties are "superimposed," for + # example leaving the GPIO_ACTIVE_LOW flag clear and specifying the + # respective *-inverted property property results in a + # double-inversion and actually means the "normal" line polarity is + # in effect. + wp-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: + The Write Protect line polarity is inverted. + + cd-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: + The CD line polarity is inverted. + + # Other properties + + bus-width: + description: + Number of data lines. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4, 8] + default: 1 + + max-frequency: + description: | + Maximum operating frequency of the bus: + - for eMMC, the maximum supported frequency is 200MHz, + - for SD/SDIO cards the SDR104 mode has a max supported + frequency of 208MHz, + - some mmc host controllers do support a max frequency upto + 384MHz. + So, lets keep the maximum supported value here. + + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 400000 + maximum: 384000000 + + disable-wp: + $ref: /schemas/types.yaml#/definitions/flag + description: + When set, no physical write-protect line is present. This + property should only be specified when the controller has a + dedicated write-protect detection logic. If a GPIO is always used + for the write-protect detection logic, it is sufficient to not + specify the wp-gpios property in the absence of a write-protect + line. Not used in combination with eMMC or SDIO. + + wp-gpios: + maxItems: 1 + description: + GPIO to use for the write-protect detection. + + cd-debounce-delay-ms: + description: + Set delay time before detecting card after card insert + interrupt. + + no-1-8-v: + $ref: /schemas/types.yaml#/definitions/flag + description: + When specified, denotes that 1.8V card voltage is not supported + on this system, even if the controller claims it. + + cap-sd-highspeed: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD high-speed timing is supported. + + cap-mmc-highspeed: + $ref: /schemas/types.yaml#/definitions/flag + description: + MMC high-speed timing is supported. + + sd-uhs-sdr12: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR12 speed is supported. + + sd-uhs-sdr25: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR25 speed is supported. + + sd-uhs-sdr50: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR50 speed is supported. + + sd-uhs-sdr104: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR104 speed is supported. + + sd-uhs-ddr50: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS DDR50 speed is supported. + + cap-power-off-card: + $ref: /schemas/types.yaml#/definitions/flag + description: + Powering off the card is safe. + + cap-mmc-hw-reset: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC hardware reset is supported + + cap-sdio-irq: + $ref: /schemas/types.yaml#/definitions/flag + description: + enable SDIO IRQ signalling on this interface + + full-pwr-cycle: + $ref: /schemas/types.yaml#/definitions/flag + description: + Full power cycle of the card is supported. + + full-pwr-cycle-in-suspend: + $ref: /schemas/types.yaml#/definitions/flag + description: + Full power cycle of the card in suspend is supported. + + mmc-ddr-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (1.2V I/O) is supported. + + mmc-ddr-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (1.8V I/O) is supported. + + mmc-ddr-3_3v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (3.3V I/O) is supported. + + mmc-hs200-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS200 mode (1.2V I/O) is supported. + + mmc-hs200-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS200 mode (1.8V I/O) is supported. + + mmc-hs400-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 mode (1.2V I/O) is supported. + + mmc-hs400-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 mode (1.8V I/O) is supported. + + mmc-hs400-enhanced-strobe: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 enhanced strobe mode is supported + + no-mmc-hs400: + $ref: /schemas/types.yaml#/definitions/flag + description: + All eMMC HS400 modes are not supported. + + dsr: + description: + Value the card Driver Stage Register (DSR) should be programmed + with. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0xffff + + no-sdio: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send SDIO commands during + initialization. + + no-sd: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send SD commands during initialization. + + no-mmc: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send MMC commands during + initialization. + + fixed-emmc-driver-type: + description: + For non-removable eMMC, enforce this driver type. The value is + the driver type as specified in the eMMC specification (table + 206 in spec version 5.1) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 + + post-power-on-delay-ms: + description: + It was invented for MMC pwrseq-simple which could be referred to + mmc-pwrseq-simple.yaml. But now it\'s reused as a tunable delay + waiting for I/O signalling and card power supply to be stable, + regardless of whether pwrseq-simple is used. Default to 10ms if + no available. + default: 10 + + supports-cqe: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the corresponding + MMC host controller supports HW command queue feature. + + disable-cqe-dcmd: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the MMC + controller\'s command queue engine (CQE) does not support direct + commands (DCMDs). + + keep-power-in-suspend: + $ref: /schemas/types.yaml#/definitions/flag + description: + SDIO only. Preserves card power during a suspend/resume cycle. + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + SDIO only. Enables wake up of host system on SDIO IRQ assertion. + + vmmc-supply: + description: + Supply for the card power + + vqmmc-supply: + description: + Supply for the bus IO line power, such as a level shifter. + If the level shifter is controlled by a GPIO line, this shall + be modeled as a "regulator-fixed" with a GPIO line for + switching the level shifter on/off. + + mmc-pwrseq: + $ref: /schemas/types.yaml#/definitions/phandle + description: + System-on-Chip designs may specify a specific MMC power + sequence. To successfully detect an (e)MMC/SD/SDIO card, that + power sequence must be maintained while initializing the card. + +patternProperties: + "^.*@[0-9]+$": + type: object + description: | + On embedded systems the cards connected to a host may need + additional properties. These can be specified in subnodes to the + host controller node. The subnodes are identified by the + standard \'reg\' property. Which information exactly can be + specified depends on the bindings for the SDIO function driver + for the subnode, as specified by the compatible string. + + properties: + compatible: + description: + Name of SDIO function following generic names recommended + practice + + reg: + items: + - minimum: 0 + maximum: 7 + description: + Must contain the SDIO function number of the function this + subnode describes. A value of 0 denotes the memory SD + function, values from 1 to 7 denote the SDIO functions. + + required: + - reg + + "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$": + $ref: /schemas/types.yaml#/definitions/uint32-array + + minItems: 2 + maxItems: 2 + items: + minimum: 0 + maximum: 359 + description: + Set the clock (phase) delays which are to be configured in the + controller while switching to particular speed mode. These values + are in pair of degrees. + +dependencies: + cd-debounce-delay-ms: [ cd-gpios ] + fixed-emmc-driver-type: [ non-removable ] + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 58ae298cd2fc..9d7a1298c455 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -9,7 +9,7 @@ title: MMC Controller Common Properties maintainers: - Ulf Hansson <ulf.hansson@linaro.org> -description: | +description: These properties are common to multiple MMC host controllers. Any host that requires the respective functionality should implement them using these definitions. @@ -18,351 +18,13 @@ description: | (and the corresponding mmcblkN devices) by defining an alias in the /aliases device tree node. +$ref: mmc-controller-common.yaml# + properties: $nodename: pattern: "^mmc(@.*)?$" - "#address-cells": - const: 1 - description: | - The cell is the slot ID if a function subnode is used. - - "#size-cells": - const: 0 - - # Card Detection. - # If none of these properties are supplied, the host native card - # detect will be used. Only one of them should be provided. - - broken-cd: - $ref: /schemas/types.yaml#/definitions/flag - description: - There is no card detection available; polling must be used. - - cd-gpios: - maxItems: 1 - description: - The card detection will be done using the GPIO provided. - - non-removable: - $ref: /schemas/types.yaml#/definitions/flag - description: - Non-removable slot (like eMMC); assume always present. - - # *NOTE* on CD and WP polarity. To use common for all SD/MMC host - # controllers line polarity properties, we have to fix the meaning - # of the "normal" and "inverted" line levels. We choose to follow - # the SDHCI standard, which specifies both those lines as "active - # low." Therefore, using the "cd-inverted" property means, that the - # CD line is active high, i.e. it is high, when a card is - # inserted. Similar logic applies to the "wp-inverted" property. - # - # CD and WP lines can be implemented on the hardware in one of two - # ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or - # as dedicated pins. Polarity of dedicated pins can be specified, - # using *-inverted properties. GPIO polarity can also be specified - # using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the - # latter case. We choose to use the XOR logic for GPIO CD and WP - # lines. This means, the two properties are "superimposed," for - # example leaving the GPIO_ACTIVE_LOW flag clear and specifying the - # respective *-inverted property property results in a - # double-inversion and actually means the "normal" line polarity is - # in effect. - wp-inverted: - $ref: /schemas/types.yaml#/definitions/flag - description: - The Write Protect line polarity is inverted. - - cd-inverted: - $ref: /schemas/types.yaml#/definitions/flag - description: - The CD line polarity is inverted. - - # Other properties - - bus-width: - description: - Number of data lines. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 4, 8] - default: 1 - - max-frequency: - description: | - Maximum operating frequency of the bus: - - for eMMC, the maximum supported frequency is 200MHz, - - for SD/SDIO cards the SDR104 mode has a max supported - frequency of 208MHz, - - some mmc host controllers do support a max frequency upto - 384MHz. - So, lets keep the maximum supported value here. - - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 400000 - maximum: 384000000 - - disable-wp: - $ref: /schemas/types.yaml#/definitions/flag - description: - When set, no physical write-protect line is present. This - property should only be specified when the controller has a - dedicated write-protect detection logic. If a GPIO is always used - for the write-protect detection logic, it is sufficient to not - specify the wp-gpios property in the absence of a write-protect - line. Not used in combination with eMMC or SDIO. - - wp-gpios: - maxItems: 1 - description: - GPIO to use for the write-protect detection. - - cd-debounce-delay-ms: - description: - Set delay time before detecting card after card insert - interrupt. - - no-1-8-v: - $ref: /schemas/types.yaml#/definitions/flag - description: - When specified, denotes that 1.8V card voltage is not supported - on this system, even if the controller claims it. - - cap-sd-highspeed: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD high-speed timing is supported. - - cap-mmc-highspeed: - $ref: /schemas/types.yaml#/definitions/flag - description: - MMC high-speed timing is supported. - - sd-uhs-sdr12: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS SDR12 speed is supported. - - sd-uhs-sdr25: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS SDR25 speed is supported. - - sd-uhs-sdr50: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS SDR50 speed is supported. - - sd-uhs-sdr104: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS SDR104 speed is supported. - - sd-uhs-ddr50: - $ref: /schemas/types.yaml#/definitions/flag - description: - SD UHS DDR50 speed is supported. - - cap-power-off-card: - $ref: /schemas/types.yaml#/definitions/flag - description: - Powering off the card is safe. - - cap-mmc-hw-reset: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC hardware reset is supported - - cap-sdio-irq: - $ref: /schemas/types.yaml#/definitions/flag - description: - enable SDIO IRQ signalling on this interface - - full-pwr-cycle: - $ref: /schemas/types.yaml#/definitions/flag - description: - Full power cycle of the card is supported. - - full-pwr-cycle-in-suspend: - $ref: /schemas/types.yaml#/definitions/flag - description: - Full power cycle of the card in suspend is supported. - - mmc-ddr-1_2v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC high-speed DDR mode (1.2V I/O) is supported. - - mmc-ddr-1_8v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC high-speed DDR mode (1.8V I/O) is supported. - - mmc-ddr-3_3v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC high-speed DDR mode (3.3V I/O) is supported. - - mmc-hs200-1_2v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS200 mode (1.2V I/O) is supported. - - mmc-hs200-1_8v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS200 mode (1.8V I/O) is supported. - - mmc-hs400-1_2v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS400 mode (1.2V I/O) is supported. - - mmc-hs400-1_8v: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS400 mode (1.8V I/O) is supported. - - mmc-hs400-enhanced-strobe: - $ref: /schemas/types.yaml#/definitions/flag - description: - eMMC HS400 enhanced strobe mode is supported - - no-mmc-hs400: - $ref: /schemas/types.yaml#/definitions/flag - description: - All eMMC HS400 modes are not supported. - - dsr: - description: - Value the card Driver Stage Register (DSR) should be programmed - with. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 0xffff - - no-sdio: - $ref: /schemas/types.yaml#/definitions/flag - description: - Controller is limited to send SDIO commands during - initialization. - - no-sd: - $ref: /schemas/types.yaml#/definitions/flag - description: - Controller is limited to send SD commands during initialization. - - no-mmc: - $ref: /schemas/types.yaml#/definitions/flag - description: - Controller is limited to send MMC commands during - initialization. - - fixed-emmc-driver-type: - description: - For non-removable eMMC, enforce this driver type. The value is - the driver type as specified in the eMMC specification (table - 206 in spec version 5.1) - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 4 - - post-power-on-delay-ms: - description: - It was invented for MMC pwrseq-simple which could be referred to - mmc-pwrseq-simple.yaml. But now it\'s reused as a tunable delay - waiting for I/O signalling and card power supply to be stable, - regardless of whether pwrseq-simple is used. Default to 10ms if - no available. - default: 10 - - supports-cqe: - $ref: /schemas/types.yaml#/definitions/flag - description: - The presence of this property indicates that the corresponding - MMC host controller supports HW command queue feature. - - disable-cqe-dcmd: - $ref: /schemas/types.yaml#/definitions/flag - description: - The presence of this property indicates that the MMC - controller\'s command queue engine (CQE) does not support direct - commands (DCMDs). - - keep-power-in-suspend: - $ref: /schemas/types.yaml#/definitions/flag - description: - SDIO only. Preserves card power during a suspend/resume cycle. - - wakeup-source: - $ref: /schemas/types.yaml#/definitions/flag - description: - SDIO only. Enables wake up of host system on SDIO IRQ assertion. - - vmmc-supply: - description: - Supply for the card power - - vqmmc-supply: - description: - Supply for the bus IO line power, such as a level shifter. - If the level shifter is controlled by a GPIO line, this shall - be modeled as a "regulator-fixed" with a GPIO line for - switching the level shifter on/off. - - mmc-pwrseq: - $ref: /schemas/types.yaml#/definitions/phandle - description: - System-on-Chip designs may specify a specific MMC power - sequence. To successfully detect an (e)MMC/SD/SDIO card, that - power sequence must be maintained while initializing the card. - -patternProperties: - "^.*@[0-9]+$": - type: object - description: | - On embedded systems the cards connected to a host may need - additional properties. These can be specified in subnodes to the - host controller node. The subnodes are identified by the - standard \'reg\' property. Which information exactly can be - specified depends on the bindings for the SDIO function driver - for the subnode, as specified by the compatible string. - - properties: - compatible: - description: | - Name of SDIO function following generic names recommended - practice - - reg: - items: - - minimum: 0 - maximum: 7 - description: - Must contain the SDIO function number of the function this - subnode describes. A value of 0 denotes the memory SD - function, values from 1 to 7 denote the SDIO functions. - - required: - - reg - - "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$": - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - minimum: 0 - maximum: 359 - description: - Set the clock (phase) delays which are to be configured in the - controller while switching to particular speed mode. These values - are in pair of degrees. - -dependencies: - cd-debounce-delay-ms: [ cd-gpios ] - fixed-emmc-driver-type: [ non-removable ] - -additionalProperties: true +unevaluatedProperties: true examples: - | diff --git a/Documentation/devicetree/bindings/mmc/mmc-slot.yaml b/Documentation/devicetree/bindings/mmc/mmc-slot.yaml new file mode 100644 index 000000000000..1f0667828063 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-slot.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mmc-slot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MMC slot properties + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +description: + These properties defines slot properties for MMC controlers that + have multiple slots or ports provided by the same controller and + sharing the same resources. + +$ref: mmc-controller-common.yaml# + +properties: + $nodename: + pattern: "^slot(@.*)?$" + + compatible: + const: mmc-slot + + reg: + description: + the slot (or "port") ID + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mmc { + #address-cells = <1>; + #size-cells = <0>; + slot@0 { + compatible = "mmc-slot"; + reg = <0>; + bus-width = <4>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml index f86ebd81f5a5..0debccbd6519 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml @@ -235,11 +235,19 @@ allOf: properties: compatible: contains: - const: mediatek,mt8183-mmc + enum: + - mediatek,mt7986-mmc + - mediatek,mt7988-mmc + - mediatek,mt8183-mmc + - mediatek,mt8196-mmc then: properties: reg: minItems: 2 + else: + properties: + reg: + maxItems: 1 - if: properties: diff --git a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml index 5fe65795f796..ef2d1d7c92fc 100644 --- a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml @@ -29,6 +29,7 @@ properties: - samsung,exynos5433-dw-mshc-smu - samsung,exynos7885-dw-mshc-smu - samsung,exynos850-dw-mshc-smu + - samsung,exynos8895-dw-mshc-smu - const: samsung,exynos7-dw-mshc-smu reg: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index 8b393e26e025..eed9063e9bb3 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SDHCI controller (sdhci-msm) maintainers: - - Bhupesh Sharma <bhupesh.sharma@linaro.org> + - Bjorn Andersson <andersson@kernel.org> + - Konrad Dybcio <konradybcio@kernel.org> description: Secure Digital Host Controller Interface (SDHCI) present on diff --git a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt deleted file mode 100644 index d2eada5044b2..000000000000 --- a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Cadence NAND controller - -Required properties: - - compatible : "cdns,hp-nfc" - - reg : Contains two entries, each of which is a tuple consisting of a - physical address and length. The first entry is the address and - length of the controller register set. The second entry is the - address and length of the Slave DMA data port. - - reg-names: should contain "reg" and "sdma" - - #address-cells: should be 1. The cell encodes the chip select connection. - - #size-cells : should be 0. - - interrupts : The interrupt number. - - clocks: phandle of the controller core clock (nf_clk). - -Optional properties: - - dmas: shall reference DMA channel associated to the NAND controller - - cdns,board-delay-ps : Estimated Board delay. The value includes the total - round trip delay for the signals and is used for deciding on values - associated with data read capture. The example formula for SDR mode is - the following: - board delay = RE#PAD delay + PCB trace to device + PCB trace from device - + DQ PAD delay - -Child nodes represent the available NAND chips. - -Required properties of NAND chips: - - reg: shall contain the native Chip Select ids from 0 to max supported by - the cadence nand flash controller - -See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on -generic bindings. - -Example: - -nand_controller: nand-controller@60000000 { - compatible = "cdns,hp-nfc"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x60000000 0x10000>, <0x80000000 0x10000>; - reg-names = "reg", "sdma"; - clocks = <&nf_clk>; - cdns,board-delay-ps = <4830>; - interrupts = <2 0>; - nand@0 { - reg = <0>; - label = "nand-1"; - }; - nand@1 { - reg = <1>; - label = "nand-2"; - }; - -}; diff --git a/Documentation/devicetree/bindings/mtd/cdns,hp-nfc.yaml b/Documentation/devicetree/bindings/mtd/cdns,hp-nfc.yaml new file mode 100644 index 000000000000..0bed37a994c3 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/cdns,hp-nfc.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/cdns,hp-nfc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence NAND controller + +maintainers: + - Niravkumar L Rabara <niravkumar.l.rabara@intel.com> + +allOf: + - $ref: nand-controller.yaml + +properties: + compatible: + items: + - const: cdns,hp-nfc + + reg: + items: + - description: Controller register set + - description: Slave DMA data port register set + + reg-names: + items: + - const: reg + - const: sdma + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + dmas: + maxItems: 1 + + cdns,board-delay-ps: + description: | + Estimated Board delay. The value includes the total round trip + delay for the signals and is used for deciding on values associated + with data read capture. The example formula for SDR mode is the + following. + board delay = RE#PAD delay + PCB trace to device + PCB trace from device + + DQ PAD delay + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + nand-controller@10b80000 { + compatible = "cdns,hp-nfc"; + reg = <0x10b80000 0x10000>, + <0x10840000 0x10000>; + reg-names = "reg", "sdma"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&nf_clk>; + cdns,board-delay-ps = <4830>; + + nand@0 { + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/davinci-nand.txt b/Documentation/devicetree/bindings/mtd/davinci-nand.txt deleted file mode 100644 index eb8e2ff4dbd2..000000000000 --- a/Documentation/devicetree/bindings/mtd/davinci-nand.txt +++ /dev/null @@ -1,94 +0,0 @@ -Device tree bindings for Texas instruments Davinci/Keystone NAND controller - -This file provides information, what the device node for the davinci/keystone -NAND interface contains. - -Documentation: -Davinci DM646x - https://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf -Kestone - https://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf - -Required properties: - -- compatible: "ti,davinci-nand" - "ti,keystone-nand" - -- reg: Contains 2 offset/length values: - - offset and length for the access window. - - offset and length for accessing the AEMIF - control registers. - -- ti,davinci-chipselect: number of chipselect. Indicates on the - davinci_nand driver which chipselect is used - for accessing the nand. - Can be in the range [0-3]. - -Recommended properties : - -- ti,davinci-mask-ale: mask for ALE. Needed for executing address - phase. These offset will be added to the base - address for the chip select space the NAND Flash - device is connected to. - If not set equal to 0x08. - -- ti,davinci-mask-cle: mask for CLE. Needed for executing command - phase. These offset will be added to the base - address for the chip select space the NAND Flash - device is connected to. - If not set equal to 0x10. - -- ti,davinci-mask-chipsel: mask for chipselect address. Needed to mask - addresses for given chipselect. - -- nand-ecc-mode: operation mode of the NAND ecc mode. ECC mode - valid values for davinci driver: - - "none" - - "soft" - - "hw" - -- ti,davinci-ecc-bits: used ECC bits, currently supported 1 or 4. - -- nand-bus-width: buswidth 8 or 16. If not present 8. - -- nand-on-flash-bbt: use flash based bad block table support. OOB - identifier is saved in OOB area. If not present - false. - -Deprecated properties: - -- ti,davinci-ecc-mode: operation mode of the NAND ecc mode. ECC mode - valid values for davinci driver: - - "none" - - "soft" - - "hw" - -- ti,davinci-nand-buswidth: buswidth 8 or 16. If not present 8. - -- ti,davinci-nand-use-bbt: use flash based bad block table support. OOB - identifier is saved in OOB area. If not present - false. - -Nand device bindings may contain additional sub-nodes describing partitions of -the address space. See mtd.yaml for more detail. The NAND Flash timing -values must be programmed in the chip select’s node of AEMIF -memory-controller (see Documentation/devicetree/bindings/memory-controllers/ -davinci-aemif.txt). - -Example(da850 EVM ): - -nand_cs3@62000000 { - compatible = "ti,davinci-nand"; - reg = <0x62000000 0x807ff - 0x68000000 0x8000>; - ti,davinci-chipselect = <1>; - ti,davinci-mask-ale = <0>; - ti,davinci-mask-cle = <0>; - ti,davinci-mask-chipsel = <0>; - nand-ecc-mode = "hw"; - ti,davinci-ecc-bits = <4>; - nand-on-flash-bbt; - - partition@180000 { - label = "ubifs"; - reg = <0x180000 0x7e80000>; - }; -}; diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml index 6e3afb42926e..335f8204aa1e 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml @@ -96,6 +96,10 @@ properties: If "broken-flash-reset" is present then having this property does not make any difference. + vcc-supply: + description: + Supply for the SPI NOR power. + spi-cpol: true spi-cpha: true diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml index 0ff32bd00bf6..5c6b628c608d 100644 --- a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml +++ b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml @@ -16,8 +16,9 @@ description: | properties: compatible: - items: - - const: microchip,48l640 + enum: + - fujitsu,mb85rs128ty + - microchip,48l640 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mtd/nuvoton,ma35d1-nand.yaml b/Documentation/devicetree/bindings/mtd/nuvoton,ma35d1-nand.yaml new file mode 100644 index 000000000000..0b651450a8f1 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/nuvoton,ma35d1-nand.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/nuvoton,ma35d1-nand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton MA35D1 NAND Flash Interface (NFI) Controller + +maintainers: + - Hui-Ping Chen <hpchen0nvt@gmail.com> + +allOf: + - $ref: nand-controller.yaml# + +properties: + compatible: + enum: + - nuvoton,ma35d1-nand-controller + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +patternProperties: + "^nand@[a-f0-9]$": + type: object + $ref: raw-nand-chip.yaml + properties: + reg: + minimum: 0 + maximum: 1 + + nand-ecc-step-size: + enum: [512, 1024] + + nand-ecc-strength: + enum: [8, 12, 24] + + required: + - reg + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/nuvoton,ma35d1-clk.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + nand-controller@401A0000 { + compatible = "nuvoton,ma35d1-nand-controller"; + reg = <0x0 0x401A0000 0x0 0x1000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NAND_GATE>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + nand-on-flash-bbt; + nand-ecc-step-size = <512>; + nand-ecc-strength = <8>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot@0 { + label = "nand-uboot"; + read-only; + reg = <0x0 0x300000>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml index 058253d6d889..62086366837c 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml @@ -82,7 +82,7 @@ examples: uimage@100000 { reg = <0x0100000 0x200000>; - compress = "lzma"; + compression = "lzma"; }; }; diff --git a/Documentation/devicetree/bindings/mtd/ti,davinci-nand.yaml b/Documentation/devicetree/bindings/mtd/ti,davinci-nand.yaml new file mode 100644 index 000000000000..ed24b0ea86e5 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ti,davinci-nand.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/ti,davinci-nand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI DaVinci NAND controller + +maintainers: + - Marcus Folkesson <marcus.folkesson@gmail.com> + +allOf: + - $ref: nand-controller.yaml + +properties: + compatible: + enum: + - ti,davinci-nand + - ti,keystone-nand + + reg: + items: + - description: Access window. + - description: AEMIF control registers. + + partitions: + $ref: /schemas/mtd/partitions/partitions.yaml + + ti,davinci-chipselect: + description: + Number of chipselect. Indicate on the davinci_nand driver which + chipselect is used for accessing the nand. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + ti,davinci-mask-ale: + description: + Mask for ALE. Needed for executing address phase. These offset will be + added to the base address for the chip select space the NAND Flash + device is connected to. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x08 + + ti,davinci-mask-cle: + description: + Mask for CLE. Needed for executing command phase. These offset will be + added to the base address for the chip select space the NAND Flash device + is connected to. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x10 + + ti,davinci-mask-chipsel: + description: + Mask for chipselect address. Needed to mask addresses for given + chipselect. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + ti,davinci-ecc-bits: + description: Used ECC bits. + enum: [1, 4] + + ti,davinci-ecc-mode: + description: Operation mode of the NAND ECC mode. + $ref: /schemas/types.yaml#/definitions/string + enum: [none, soft, hw, on-die] + deprecated: true + + ti,davinci-nand-buswidth: + description: Bus width to the NAND chip. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8 + deprecated: true + + ti,davinci-nand-use-bbt: + type: boolean + description: + Use flash based bad block table support. OOB identifier is saved in OOB + area. + deprecated: true + +required: + - compatible + - reg + - ti,davinci-chipselect + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <1>; + + nand-controller@2000000,0 { + compatible = "ti,davinci-nand"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x02000000 0x02000000>, + <1 0x00000000 0x00008000>; + + ti,davinci-chipselect = <1>; + ti,davinci-mask-ale = <0>; + ti,davinci-mask-cle = <0>; + ti,davinci-mask-chipsel = <0>; + + ti,davinci-nand-buswidth = <16>; + ti,davinci-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + ti,davinci-nand-use-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot env"; + reg = <0 0x020000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index d1e2bca3c503..798a4c19f18c 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -166,11 +166,11 @@ unevaluatedProperties: false examples: - | ethmac: ethernet@c9410000 { - compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; - reg = <0xc9410000 0x10000>, <0xc8834540 0x8>; - interrupts = <8>; - interrupt-names = "macirq"; - clocks = <&clk_eth>, <&clk_fclk_div2>, <&clk_mpll2>, <&clk_fclk_div2>; - clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; - phy-mode = "rgmii"; + compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; + reg = <0xc9410000 0x10000>, <0xc8834540 0x8>; + interrupts = <8>; + interrupt-names = "macirq"; + clocks = <&clk_eth>, <&clk_fclk_div2>, <&clk_mpll2>, <&clk_fclk_div2>; + clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; + phy-mode = "rgmii"; }; diff --git a/Documentation/devicetree/bindings/net/asix,ax88178.yaml b/Documentation/devicetree/bindings/net/asix,ax88178.yaml index 768504ccbf74..03341b7438d5 100644 --- a/Documentation/devicetree/bindings/net/asix,ax88178.yaml +++ b/Documentation/devicetree/bindings/net/asix,ax88178.yaml @@ -63,8 +63,8 @@ examples: #size-cells = <0>; ethernet@1 { - compatible = "usbb95,772b"; - reg = <1>; + compatible = "usbb95,772b"; + reg = <1>; }; }; }; diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index 7bb68311c609..a72152f7e29b 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -101,7 +101,10 @@ properties: max-speed: true firmware-name: - description: specify the name of nvm firmware to load + minItems: 1 + items: + - description: specify the name of nvm firmware to load + - description: specify the name of rampatch firmware to load local-bd-address: true @@ -154,16 +157,11 @@ allOf: - qcom,wcn6750-bt then: required: - - enable-gpios - - swctrl-gpios - - vddio-supply - vddaon-supply - - vddbtcxmx-supply - vddrfacmn-supply - vddrfa0p8-supply - vddrfa1p7-supply - vddrfa1p2-supply - - vddasd-supply - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml index 7c90a4390531..0e3fb4e42e3f 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml @@ -85,16 +85,16 @@ examples: #size-cells = <1>; mdio0: mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xe14 0x8>; + compatible = "brcm,genet-mdio-v4"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe14 0x8>; - phy1: ethernet-phy@1 { + phy1: ethernet-phy@1 { max-speed = <1000>; reg = <1>; compatible = "ethernet-phy-ieee802.3-c22"; - }; + }; }; }; @@ -110,10 +110,10 @@ examples: interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>; mdio1: mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xe14 0x8>; + compatible = "brcm,genet-mdio-v4"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe14 0x8>; }; }; @@ -129,15 +129,15 @@ examples: interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>; mdio2: mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xe14 0x8>; + compatible = "brcm,genet-mdio-v4"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe14 0x8>; - phy0: ethernet-phy@0 { + phy0: ethernet-phy@0 { max-speed = <1000>; reg = <0>; compatible = "ethernet-phy-ieee802.3-c22"; - }; + }; }; }; diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml index af96b4fd89d5..3f27746d9a56 100644 --- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml +++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml @@ -38,43 +38,43 @@ unevaluatedProperties: false examples: - | - mdio_mux_iproc: mdio-mux@66020000 { + mdio-mux@66020000 { compatible = "brcm,mdio-mux-iproc"; reg = <0x66020000 0x250>; #address-cells = <1>; #size-cells = <0>; mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - pci_phy0: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - }; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + }; }; mdio@7 { - reg = <0x7>; - #address-cells = <1>; - #size-cells = <0>; - - pci_phy1: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - }; + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + + pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + }; }; mdio@10 { - reg = <0x10>; - #address-cells = <1>; - #size-cells = <0>; + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; - gphy0: eth-phy@10 { - reg = <0x10>; - }; + eth-phy@10 { + reg = <0x10>; + }; }; }; diff --git a/Documentation/devicetree/bindings/net/can/atmel,at91sam9263-can.yaml b/Documentation/devicetree/bindings/net/can/atmel,at91sam9263-can.yaml new file mode 100644 index 000000000000..c818c01a718b --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/atmel,at91sam9263-can.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/atmel,at91sam9263-can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip AT91 CAN Controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - atmel,at91sam9263-can + - atmel,at91sam9x5-can + - items: + - enum: + - microchip,sam9x60-can + - const: atmel,at91sam9x5-can + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: can_clk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/at91.h> + can@f000c000 { + compatible = "atmel,at91sam9263-can"; + reg = <0xf000c000 0x300>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; + clock-names = "can_clk"; + }; diff --git a/Documentation/devicetree/bindings/net/can/atmel-can.txt b/Documentation/devicetree/bindings/net/can/atmel-can.txt deleted file mode 100644 index 218a3b3eb27e..000000000000 --- a/Documentation/devicetree/bindings/net/can/atmel-can.txt +++ /dev/null @@ -1,15 +0,0 @@ -* AT91 CAN * - -Required properties: - - compatible: Should be "atmel,at91sam9263-can", "atmel,at91sam9x5-can" or - "microchip,sam9x60-can" - - reg: Should contain CAN controller registers location and length - - interrupts: Should contain IRQ line for the CAN controller - -Example: - - can0: can@f000c000 { - compatible = "atmel,at91sam9x5-can"; - reg = <0xf000c000 0x300>; - interrupts = <40 4 5> - }; diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml index 4d7d67ee175a..ff1b59a0294e 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml @@ -99,11 +99,11 @@ examples: #include <dt-bindings/reset/altr,rst-mgr.h> can@ffc00000 { - compatible = "bosch,d_can"; - reg = <0xffc00000 0x1000>; - interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; - clocks = <&can0_clk>; - resets = <&rst CAN0_RESET>; + compatible = "bosch,d_can"; + reg = <0xffc00000 0x1000>; + interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; + clocks = <&can0_clk>; + resets = <&rst CAN0_RESET>; }; - | can@0 { diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml index db446dde6842..e0ec53bc10c6 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml @@ -56,15 +56,15 @@ examples: #size-cells = <0>; can@1 { - compatible = "microchip,mcp2515"; - reg = <1>; - clocks = <&clk24m>; - interrupt-parent = <&gpio4>; - interrupts = <13 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <®5v0>; - xceiver-supply = <®5v0>; - gpio-controller; - #gpio-cells = <2>; + compatible = "microchip,mcp2515"; + reg = <1>; + clocks = <&clk24m>; + interrupt-parent = <&gpio4>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®5v0>; + xceiver-supply = <®5v0>; + gpio-controller; + #gpio-cells = <2>; }; }; diff --git a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml index 01e4d4a54df6..1219c5cb601f 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml @@ -15,7 +15,11 @@ allOf: properties: compatible: - const: microchip,mpfs-can + oneOf: + - items: + - const: microchip,pic64gx-can + - const: microchip,mpfs-can + - const: microchip,mpfs-can reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml index de1d4298893b..c7510b00954a 100644 --- a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml +++ b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml @@ -63,7 +63,7 @@ properties: maxItems: 1 st,gcan: - $ref: /schemas/types.yaml#/definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle to the gcan node which allows to access the 512-bytes SRAM memory shared by the two bxCAN cells (CAN1 primary and CAN2 diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt deleted file mode 100644 index 20c0572c9853..000000000000 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ /dev/null @@ -1,48 +0,0 @@ -Texas Instruments TCAN4x5x CAN Controller -================================================ - -This file provides device node information for the TCAN4x5x interface contains. - -Required properties: - - compatible: - "ti,tcan4552", "ti,tcan4x5x" - "ti,tcan4553", "ti,tcan4x5x" or - "ti,tcan4x5x" - - reg: 0 - - #address-cells: 1 - - #size-cells: 0 - - spi-max-frequency: Maximum frequency of the SPI bus the chip can - operate at should be less than or equal to 18 MHz. - - interrupt-parent: the phandle to the interrupt controller which provides - the interrupt. - - interrupts: interrupt specification for data-ready. - -See Documentation/devicetree/bindings/net/can/bosch,m_can.yaml for additional -required property details. - -Optional properties: - - reset-gpios: Hardwired output GPIO. If not defined then software - reset. - - device-state-gpios: Input GPIO that indicates if the device is in - a sleep state or if the device is active. Not - available with tcan4552/4553. - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not - available with tcan4552/4553. - - wakeup-source: Leave the chip running when suspended, and configure - the RX interrupt to wake up the device. - -Example: -tcan4x5x: tcan4x5x@0 { - compatible = "ti,tcan4x5x"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <10000000>; - bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>; - interrupt-parent = <&gpio1>; - interrupts = <14 IRQ_TYPE_LEVEL_LOW>; - device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; - wakeup-source; -}; diff --git a/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml b/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml new file mode 100644 index 000000000000..384e15da2713 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/ti,tcan4x5x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TCAN4x5x CAN Controller + +maintainers: + - Marc Kleine-Budde <mkl@pengutronix.de> + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,tcan4552 + - ti,tcan4553 + - const: ti,tcan4x5x + - const: ti,tcan4x5x + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: The GPIO parent interrupt. + + clocks: + maxItems: 1 + + clock-names: + items: + - const: cclk + + reset-gpios: + description: Hardwired output GPIO. If not defined then software reset. + maxItems: 1 + + device-state-gpios: + description: + Input GPIO that indicates if the device is in a sleep state or if the + device is active. Not available with tcan4552/4553. + maxItems: 1 + + device-wake-gpios: + description: + Wake up GPIO to wake up the TCAN device. + Not available with tcan4552/4553. + maxItems: 1 + + bosch,mram-cfg: + description: | + Message RAM configuration data. + Multiple M_CAN instances can share the same Message RAM + and each element(e.g Rx FIFO or Tx Buffer and etc) number + in Message RAM is also configurable, so this property is + telling driver how the shared or private Message RAM are + used by this M_CAN controller. + + The format should be as follows: + <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems> + The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to + 0x0 if you're using a private Message RAM. The remain cells + are used to specify how many elements are used for each FIFO/Buffer. + + M_CAN includes the following elements according to user manual: + 11-bit Filter 0-128 elements / 0-128 words + 29-bit Filter 0-64 elements / 0-128 words + Rx FIFO 0 0-64 elements / 0-1152 words + Rx FIFO 1 0-64 elements / 0-1152 words + Rx Buffers 0-64 elements / 0-1152 words + Tx Event FIFO 0-32 elements / 0-64 words + Tx Buffers 0-32 elements / 0-576 words + + Please refer to 2.4.1 Message RAM Configuration in Bosch + M_CAN user manual for details. + $ref: /schemas/types.yaml#/definitions/int32-array + items: + - description: The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to 0x0 if + you're using a private Message RAM. + default: 0 + - description: 11-bit Filter 0-128 elements / 0-128 words + minimum: 0 + maximum: 128 + - description: 29-bit Filter 0-64 elements / 0-128 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 0 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 1 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx Buffers 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Tx Event FIFO 0-32 elements / 0-64 words + minimum: 0 + maximum: 32 + - description: Tx Buffers 0-32 elements / 0-576 words + minimum: 0 + maximum: 32 + minItems: 1 + + spi-max-frequency: + description: + Must be half or less of "clocks" frequency. + maximum: 18000000 + + ti,nwkrq-voltage-vio: + type: boolean + description: + nWKRQ Pin GPO buffer voltage configuration. + Set nWKRQ to use VIO voltage rail. + When not set nWKRQ will use internal voltage rail. + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable CAN remote wakeup. + +allOf: + - $ref: can-controller.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + enum: + - ti,tcan4552 + - ti,tcan4553 + then: + properties: + device-state-gpios: false + device-wake-gpios: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - bosch,mram-cfg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + can@0 { + compatible = "ti,tcan4x5x"; + reg = <0>; + clocks = <&can0_osc>; + clock-names = "cclk"; + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins>; + spi-max-frequency = <10000000>; + bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + ti,nwkrq-voltage-vio; + wakeup-source; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + can@0 { + compatible = "ti,tcan4552", "ti,tcan4x5x"; + reg = <0>; + clocks = <&can0_osc>; + clock-names = "cclk"; + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins>; + spi-max-frequency = <10000000>; + bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml index dedfad526666..a73fc5036905 100644 --- a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml +++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml @@ -129,6 +129,24 @@ properties: minimum: 0 maximum: 383 + rx-internal-delay-ps: + description: + RGMII Receive Clock Delay defined in pico seconds, used to select + the DLL phase shift between 1000 ps (45 degree shift at 1Gbps) and + 3300 ps (147 degree shift at 1Gbps). A value of 0 ps will disable + any delay. The Default is no delay. + enum: [0, 1000, 1700, 2000, 2500, 3000, 3300] + default: 0 + + tx-internal-delay-ps: + description: + RGMII Transmit Clock Delay defined in pico seconds, used to select + the DLL phase shift between 1000 ps (45 degree shift at 1Gbps) and + 3300 ps (147 degree shift at 1Gbps). A value of 0 ps will disable + any delay. The Default is no delay. + enum: [0, 1000, 1700, 2000, 2500, 3000, 3300] + default: 0 + required: - reg - phys diff --git a/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml b/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml new file mode 100644 index 000000000000..2b8b74c5feec --- /dev/null +++ b/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2021-2024 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nxp,s32-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP S32G2xx/S32G3xx/S32R45 GMAC ethernet controller + +maintainers: + - Jan Petrous (OSS) <jan.petrous@oss.nxp.com> + +description: + This device is a Synopsys DWC IP, integrated on NXP S32G/R SoCs. + The SoC series S32G2xx and S32G3xx feature one DWMAC instance, + the SoC S32R45 has two instances. The devices can use RGMII/RMII/MII + interface over Pinctrl device or the output can be routed + to the embedded SerDes for SGMII connectivity. + +properties: + compatible: + oneOf: + - const: nxp,s32g2-dwmac + - items: + - enum: + - nxp,s32g3-dwmac + - nxp,s32r45-dwmac + - const: nxp,s32g2-dwmac + + reg: + items: + - description: Main GMAC registers + - description: GMAC PHY mode control register + + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + + clocks: + items: + - description: Main GMAC clock + - description: Transmit clock + - description: Receive clock + - description: PTP reference clock + + clock-names: + items: + - const: stmmaceth + - const: tx + - const: rx + - const: ptp_ref + +required: + - clocks + - clock-names + +allOf: + - $ref: snps,dwmac.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + + ethernet@4033c000 { + compatible = "nxp,s32g2-dwmac"; + reg = <0x0 0x4033c000 0x0 0x2000>, /* gmac IP */ + <0x0 0x4007c004 0x0 0x4>; /* GMAC_0_CTRL_STS */ + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + clocks = <&clks 24>, <&clks 17>, <&clks 16>, <&clks 15>; + clock-names = "stmmaceth", "tx", "rx", "ptp_ref"; + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <5>; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <5>; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml index a12cda8aa764..cd09560e0aea 100644 --- a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml +++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml @@ -81,7 +81,7 @@ properties: List of phandles, each pointing to the power supply for the corresponding pairset named in 'pairset-names'. This property aligns with IEEE 802.3-2022, Section 33.2.3 and 145.2.4. - PSE Pinout Alternatives (as per IEEE 802.3-2022 Table 145\u20133) + PSE Pinout Alternatives (as per IEEE 802.3-2022 Table 145-3) |-----------|---------------|---------------|---------------|---------------| | Conductor | Alternative A | Alternative A | Alternative B | Alternative B | | | (MDI-X) | (MDI) | (X) | (S) | diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml index 0bcd593a7bd0..e7ee0d9efed8 100644 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Ethernet ETHQOS device maintainers: - - Bhupesh Sharma <bhupesh.sharma@linaro.org> + - Bjorn Andersson <andersson@kernel.org> + - Konrad Dybcio <konradybcio@kernel.org> description: dwmmac based Qualcomm ethernet devices which support Gigabit @@ -21,12 +22,12 @@ properties: oneOf: - items: - enum: - - qcom,qcs8300-ethqos - - const: qcom,sa8775p-ethqos + - qcom,qcs615-ethqos + - const: qcom,qcs404-ethqos - items: - enum: - - qcom,qcs615-ethqos - - const: qcom,sm8150-ethqos + - qcom,qcs8300-ethqos + - const: qcom,sa8775p-ethqos - enum: - qcom,qcs404-ethqos - qcom,sa8775p-ethqos diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 53cae71d9957..1a46d80a66e8 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -239,7 +239,7 @@ examples: qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/sc7180-trogdor/modem/modem.mdt"; + firmware-name = "qcom/sc7180-trogdor/modem/modem.mbn"; iommus = <&apps_smmu 0x440 0x0>, <&apps_smmu 0x442 0x0>; diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index eb1f3ae41ab9..91e75eb3f329 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -67,6 +67,7 @@ properties: - ingenic,x2000-mac - loongson,ls2k-dwmac - loongson,ls7a-dwmac + - nxp,s32g2-dwmac - qcom,qcs404-ethqos - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index bf23838fe6e8..85cea9966a27 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -154,56 +154,56 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/stm32mp1-clks.h> //Example 1 - ethernet0: ethernet@5800a000 { - compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; - reg = <0x5800a000 0x2000>; - reg-names = "stmmaceth"; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - clock-names = "stmmaceth", - "mac-clk-tx", - "mac-clk-rx", - "ethstp", - "eth-ck"; - clocks = <&rcc ETHMAC>, - <&rcc ETHTX>, - <&rcc ETHRX>, - <&rcc ETHSTP>, - <&rcc ETHCK_K>; - st,syscon = <&syscfg 0x4>; - snps,pbl = <2>; - snps,axi-config = <&stmmac_axi_config_0>; - snps,tso; - phy-mode = "rgmii"; - }; + ethernet0: ethernet@5800a000 { + compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "eth-ck"; + clocks = <&rcc ETHMAC>, + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHSTP>, + <&rcc ETHCK_K>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_0>; + snps,tso; + phy-mode = "rgmii"; + }; - | //Example 2 (MCU example) - ethernet1: ethernet@40028000 { - compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; - reg = <0x40028000 0x8000>; - reg-names = "stmmaceth"; - interrupts = <0 61 0>, <0 62 0>; - interrupt-names = "macirq", "eth_wake_irq"; - clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; - clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; - st,syscon = <&syscfg 0x4>; - snps,pbl = <8>; - snps,mixed-burst; - phy-mode = "mii"; - }; + ethernet1: ethernet@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <0 61 0>, <0 62 0>; + interrupt-names = "macirq", "eth_wake_irq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + snps,mixed-burst; + phy-mode = "mii"; + }; - | //Example 3 - ethernet2: ethernet@40027000 { - compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; - reg = <0x40028000 0x8000>; - reg-names = "stmmaceth"; - interrupts = <61>; - interrupt-names = "macirq"; - clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; - clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>; - st,syscon = <&syscfg 0x4>; - snps,pbl = <8>; - phy-mode = "mii"; - }; + ethernet2: ethernet@40027000 { + compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + phy-mode = "mii"; + }; diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index 53604fab0b73..08119b6880ee 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -72,9 +72,9 @@ unevaluatedProperties: false examples: - | davinci_mdio: mdio@4a101000 { - compatible = "ti,davinci_mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x4a101000 0x1000>; - bus_freq = <1000000>; + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4a101000 0x1000>; + bus_freq = <1000000>; }; diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml index 784866ea392b..50c24248df26 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83822.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml @@ -96,6 +96,32 @@ properties: - master - slave + ti,gpio2-clk-out: + description: | + DP83822 PHY only. + The GPIO2 pin on the DP83822 can be configured as clock output. When + omitted, the PHY's default will be left as is. + + - 'mac-if': In MII mode the clock frequency is 25-MHz, in RMII Mode the + clock frequency is 50-MHz and in RGMII Mode the clock frequency is + 25-MHz. + - 'xi': XI clock(pass-through clock from XI pin). + - 'int-ref': Internal reference clock 25-MHz. + - 'rmii-master-mode-ref': RMII master mode reference clock 50-MHz. RMII + master mode reference clock is identical to MAC IF clock in RMII master + mode. + - 'free-running': Free running clock 125-MHz. + - 'recovered': Recovered clock is a 125-MHz recovered clock from a + connected link partner. + $ref: /schemas/types.yaml#/definitions/string + enum: + - mac-if + - xi + - int-ref + - rmii-master-mode-ref + - free-running + - recovered + required: - reg @@ -110,6 +136,7 @@ examples: reg = <0>; rx-internal-delay-ps = <1>; tx-internal-delay-ps = <1>; + ti,gpio2-clk-out = "xi"; }; }; diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 02b6d32003cc..b11894fbaec4 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -302,16 +302,16 @@ examples: ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; }; }; - }; - cpts@3d000 { - compatible = "ti,am65-cpts"; - reg = <0x0 0x3d000 0x0 0x400>; - clocks = <&k3_clks 18 2>; - clock-names = "cpts"; - interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cpts"; - ti,cpts-ext-ts-inputs = <4>; - ti,cpts-periodic-outputs = <2>; + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x0 0x3d000 0x0 0x400>; + clocks = <&k3_clks 18 2>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; }; }; diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml index 3888692275ad..3572749147fb 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml @@ -131,23 +131,23 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> cpts@310d0000 { - compatible = "ti,am65-cpts"; - reg = <0x310d0000 0x400>; - reg-names = "cpts"; - clocks = <&main_cpts_mux>; - clock-names = "cpts"; - interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cpts"; - ti,cpts-periodic-outputs = <6>; - ti,cpts-ext-ts-inputs = <8>; - - main_cpts_mux: refclk-mux { - #clock-cells = <0>; - clocks = <&k3_clks 118 5>, <&k3_clks 118 11>, - <&k3_clks 157 91>, <&k3_clks 157 77>, - <&k3_clks 157 102>, <&k3_clks 157 80>, - <&k3_clks 120 3>, <&k3_clks 121 3>; - assigned-clocks = <&main_cpts_mux>; - assigned-clock-parents = <&k3_clks 118 11>; - }; + compatible = "ti,am65-cpts"; + reg = <0x310d0000 0x400>; + reg-names = "cpts"; + clocks = <&main_cpts_mux>; + clock-names = "cpts"; + interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-periodic-outputs = <6>; + ti,cpts-ext-ts-inputs = <8>; + + main_cpts_mux: refclk-mux { + #clock-cells = <0>; + clocks = <&k3_clks 118 5>, <&k3_clks 118 11>, + <&k3_clks 157 91>, <&k3_clks 157 77>, + <&k3_clks 157 102>, <&k3_clks 157 80>, + <&k3_clks 120 3>, <&k3_clks 121 3>; + assigned-clocks = <&main_cpts_mux>; + assigned-clock-parents = <&k3_clks 118 11>; + }; }; diff --git a/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml b/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml index 1715b22e0dcf..930b700b73d0 100644 --- a/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml +++ b/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml @@ -79,15 +79,14 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> mmc { - #address-cells = <1>; - #size-cells = <0>; - - wifi@1 { - compatible = "marvell,sd8897"; - reg = <1>; - interrupt-parent = <&pio>; - interrupts = <38 IRQ_TYPE_LEVEL_LOW>; - marvell,wakeup-pin = <3>; + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "marvell,sd8897"; + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = <3>; }; }; - diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml new file mode 100644 index 000000000000..cbfb559f6b69 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml @@ -0,0 +1,204 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ath12k-wsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath12k wireless devices (PCIe) with WSI interface + +maintainers: + - Jeff Johnson <jjohnson@kernel.org> + - Kalle Valo <kvalo@kernel.org> + +description: | + Qualcomm Technologies IEEE 802.11be PCIe devices with WSI interface. + + The ath12k devices (QCN9274) feature WSI support. WSI stands for + WLAN Serial Interface. It is used for the exchange of specific + control information across radios based on the doorbell mechanism. + This WSI connection is essential to exchange control information + among these devices. + + The WSI interface includes TX and RX ports, which are used to connect + multiple WSI-supported devices together, forming a WSI group. + + Diagram to represent one WSI connection (one WSI group) among + three devices. + + +-------+ +-------+ +-------+ + | pcie1 | | pcie2 | | pcie3 | + | | | | | | + +----->| wsi |------->| wsi |------->| wsi |-----+ + | | grp 0 | | grp 0 | | grp 0 | | + | +-------+ +-------+ +-------+ | + +------------------------------------------------------+ + + Diagram to represent two WSI connections (two separate WSI groups) + among four devices. + + +-------+ +-------+ +-------+ +-------+ + | pcie0 | | pcie1 | | pcie2 | | pcie3 | + | | | | | | | | + +-->| wsi |--->| wsi |--+ +-->| wsi |--->| wsi |--+ + | | grp 0 | | grp 0 | | | | grp 1 | | grp 1 | | + | +-------+ +-------+ | | +-------+ +-------+ | + +---------------------------+ +---------------------------+ + +properties: + compatible: + enum: + - pci17cb,1109 # QCN9274 + + reg: + maxItems: 1 + + qcom,ath12k-calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: + String to uniquely identify variant of the calibration data for designs + with colliding bus and device ids + + qcom,wsi-controller: + $ref: /schemas/types.yaml#/definitions/flag + description: + The WSI controller device in the WSI group aids (is capable) to + synchronize the Timing Synchronization Function (TSF) clock across + all devices in the WSI group. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + This is the TX port of WSI interface. It is attached to the RX + port of the next device in the WSI connection. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + This is the RX port of WSI interface. It is attached to the TX + port of the previous device in the WSI connection. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pcie { + #address-cells = <3>; + #size-cells = <2>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@0 { + compatible = "pci17cb,1109"; + reg = <0x0 0x0 0x0 0x0 0x0>; + + qcom,ath12k-calibration-variant = "RDP433_1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + wifi1_wsi_tx: endpoint { + remote-endpoint = <&wifi2_wsi_rx>; + }; + }; + + port@1 { + reg = <1>; + + wifi1_wsi_rx: endpoint { + remote-endpoint = <&wifi3_wsi_tx>; + }; + }; + }; + }; + }; + + pcie@1 { + device_type = "pci"; + reg = <0x0 0x0 0x1 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@0 { + compatible = "pci17cb,1109"; + reg = <0x0 0x0 0x0 0x0 0x0>; + + qcom,ath12k-calibration-variant = "RDP433_2"; + qcom,wsi-controller; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + wifi2_wsi_tx: endpoint { + remote-endpoint = <&wifi3_wsi_rx>; + }; + }; + + port@1 { + reg = <1>; + + wifi2_wsi_rx: endpoint { + remote-endpoint = <&wifi1_wsi_tx>; + }; + }; + }; + }; + }; + + pcie@2 { + device_type = "pci"; + reg = <0x0 0x0 0x2 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@0 { + compatible = "pci17cb,1109"; + reg = <0x0 0x0 0x0 0x0 0x0>; + + qcom,ath12k-calibration-variant = "RDP433_3"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + wifi3_wsi_tx: endpoint { + remote-endpoint = <&wifi1_wsi_rx>; + }; + }; + + port@1 { + reg = <1>; + + wifi3_wsi_rx: endpoint { + remote-endpoint = <&wifi2_wsi_tx>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index 80845c722ae4..d37f544ab8aa 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -20,18 +20,22 @@ properties: - qcom,apq8064-qfprom - qcom,apq8084-qfprom - qcom,ipq5332-qfprom + - qcom,ipq5424-qfprom - qcom,ipq6018-qfprom - qcom,ipq8064-qfprom - qcom,ipq8074-qfprom - qcom,ipq9574-qfprom - qcom,msm8226-qfprom - qcom,msm8916-qfprom + - qcom,msm8917-qfprom - qcom,msm8974-qfprom - qcom,msm8976-qfprom - qcom,msm8996-qfprom - qcom,msm8998-qfprom - qcom,qcm2290-qfprom - qcom,qcs404-qfprom + - qcom,qcs615-qfprom + - qcom,qcs8300-qfprom - qcom,sc7180-qfprom - qcom,sc7280-qfprom - qcom,sc8280xp-qfprom diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml index 1ec0d09bcafa..85f9f5de3906 100644 --- a/Documentation/devicetree/bindings/nvmem/rmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml @@ -16,6 +16,7 @@ properties: compatible: items: - enum: + - mobileye,eyeq5-bootloader-config - raspberrypi,bootloader-config - raspberrypi,bootloader-public-key - const: nvmem-rmem diff --git a/Documentation/devicetree/bindings/nvmem/sprd,sc2731-efuse.yaml b/Documentation/devicetree/bindings/nvmem/sprd,sc2731-efuse.yaml index dc25fe3d1841..8672bde24a9b 100644 --- a/Documentation/devicetree/bindings/nvmem/sprd,sc2731-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/sprd,sc2731-efuse.yaml @@ -36,33 +36,4 @@ allOf: - $ref: nvmem-deprecated-cells.yaml# unevaluatedProperties: false - -examples: - - | - pmic { - #address-cells = <1>; - #size-cells = <0>; - - efuse@380 { - compatible = "sprd,sc2731-efuse"; - reg = <0x380>; - hwlocks = <&hwlock 12>; - #address-cells = <1>; - #size-cells = <1>; - - /* Data cells */ - fgu_calib: calib@6 { - reg = <0x6 0x2>; - bits = <0 9>; - }; - - adc_big_scale: calib@24 { - reg = <0x24 0x2>; - }; - - adc_small_scale: calib@26 { - reg = <0x26 0x2>; - }; - }; - }; ... diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml index ec5e424bb3c8..75ab552f6ecd 100644 --- a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml +++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml @@ -22,6 +22,7 @@ allOf: properties: compatible: enum: + - allwinner,sun50i-a100-operating-points - allwinner,sun50i-h6-operating-points - allwinner,sun50i-h616-operating-points diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml index a8b34f58f8f4..cddbe21f99f2 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml @@ -17,11 +17,11 @@ description: properties: clocks: minItems: 3 - maxItems: 4 + maxItems: 5 clock-names: minItems: 3 - maxItems: 4 + maxItems: 5 num-lanes: const: 1 diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml index 84ca12e8b25b..0b3526de1d62 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml @@ -22,6 +22,7 @@ properties: - fsl,imx8mm-pcie-ep - fsl,imx8mq-pcie-ep - fsl,imx8mp-pcie-ep + - fsl,imx8q-pcie-ep - fsl,imx95-pcie-ep clocks: @@ -78,6 +79,20 @@ allOf: properties: compatible: enum: + - fsl,imx8q-pcie-ep + then: + properties: + reg: + maxItems: 2 + reg-names: + items: + - const: dbi + - const: addr_space + + - if: + properties: + compatible: + enum: - fsl,imx95-pcie-ep then: properties: @@ -103,13 +118,21 @@ allOf: properties: clocks: minItems: 4 + maxItems: 4 clock-names: items: - const: pcie - const: pcie_bus - const: pcie_phy - const: pcie_aux - else: + + - if: + properties: + compatible: + enum: + - fsl,imx8mm-pcie-ep + - fsl,imx8mp-pcie-ep + then: properties: clocks: maxItems: 3 @@ -119,6 +142,20 @@ allOf: - const: pcie_bus - const: pcie_aux + - if: + properties: + compatible: + enum: + - fsl,imxq-pcie-ep + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: dbi + - const: mstr + - const: slv unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml index 1e05c560d797..4c76cd3f98a9 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml @@ -40,10 +40,11 @@ properties: - description: PCIe PHY clock. - description: Additional required clock entry for imx6sx-pcie, imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep. + - description: PCIe reference clock. clock-names: minItems: 3 - maxItems: 4 + maxItems: 5 interrupts: items: @@ -127,7 +128,7 @@ allOf: then: properties: clocks: - minItems: 4 + maxItems: 4 clock-names: items: - const: pcie @@ -140,11 +141,10 @@ allOf: compatible: enum: - fsl,imx8mq-pcie - - fsl,imx95-pcie then: properties: clocks: - minItems: 4 + maxItems: 4 clock-names: items: - const: pcie @@ -200,6 +200,23 @@ allOf: - const: mstr - const: slv + - if: + properties: + compatible: + enum: + - fsl,imx95-pcie + then: + properties: + clocks: + maxItems: 5 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_aux + - const: ref + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt deleted file mode 100644 index b40fb5d15d3d..000000000000 --- a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt +++ /dev/null @@ -1,52 +0,0 @@ -NXP Layerscape PCIe Gen4 controller - -This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all -the common properties defined in mobiveil-pcie.txt. - -Required properties: -- compatible: should contain the platform identifier such as: - "fsl,lx2160a-pcie" -- reg: base addresses and lengths of the PCIe controller register blocks. - "csr_axi_slave": Bridge config registers - "config_axi_slave": PCIe controller registers -- interrupts: A list of interrupt outputs of the controller. Must contain an - entry for each entry in the interrupt-names property. -- interrupt-names: It could include the following entries: - "intr": The interrupt that is asserted for controller interrupts - "aer": Asserted for aer interrupt when chip support the aer interrupt with - none MSI/MSI-X/INTx mode,but there is interrupt line for aer. - "pme": Asserted for pme interrupt when chip support the pme interrupt with - none MSI/MSI-X/INTx mode,but there is interrupt line for pme. -- dma-coherent: Indicates that the hardware IP block can ensure the coherency - of the data transferred from/to the IP block. This can avoid the software - cache flush/invalid actions, and improve the performance significantly. -- msi-parent : See the generic MSI binding described in - Documentation/devicetree/bindings/interrupt-controller/msi.txt. - -Example: - - pcie@3400000 { - compatible = "fsl,lx2160a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x80 0x00000000 0x0 0x00001000>; /* configuration space */ - reg-names = "csr_axi_slave", "config_axi_slave"; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ - interrupt-names = "aer", "pme", "intr"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - apio-wins = <8>; - ppio-wins = <8>; - dma-coherent; - bus-range = <0x0 0xff>; - msi-parent = <&its>; - ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/pci/mbvl,gpex40-pcie.yaml b/Documentation/devicetree/bindings/pci/mbvl,gpex40-pcie.yaml new file mode 100644 index 000000000000..d286b77921e0 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mbvl,gpex40-pcie.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mbvl,gpex40-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mobiveil AXI PCIe Host Bridge + +maintainers: + - Frank Li <Frank Li@nxp.com> + +description: + Mobiveil's GPEX 4.0 is a PCIe Gen4 host bridge IP. This configurable IP + has up to 8 outbound and inbound windows for address translation. + + NXP Layerscape PCIe Gen4 controller (Deprecated) base on Mobiveil's GPEX 4.0. + +properties: + compatible: + enum: + - fsl,lx2160a-pcie + - mbvl,gpex40-pcie + + reg: + items: + - description: PCIe controller registers + - description: Bridge config registers + - description: GPIO registers to control slot power + - description: MSI registers + minItems: 2 + + reg-names: + items: + - const: csr_axi_slave + - const: config_axi_slave + - const: gpio_slave + - const: apb_csr + minItems: 2 + + apio-wins: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + number of requested APIO outbound windows + 1. Config window + 2. Memory window + default: 2 + maximum: 256 + + ppio-wins: + $ref: /schemas/types.yaml#/definitions/uint32 + description: number of requested PPIO inbound windows + default: 1 + maximum: 256 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + interrupts: + minItems: 1 + maxItems: 3 + + interrupt-names: + minItems: 1 + maxItems: 3 + + dma-coherent: true + + msi-parent: true + +required: + - compatible + - reg + - reg-names + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + - if: + properties: + compatible: + enum: + - fsl,lx2160a-pcie + then: + properties: + reg: + maxItems: 2 + + reg-names: + maxItems: 2 + + interrupts: + minItems: 3 + + interrupt-names: + items: + - const: aer + - const: pme + - const: intr + else: + properties: + dma-coherent: false + msi-parent: false + interrupts: + maxItems: 1 + interrupt-names: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pcie@b0000000 { + compatible = "mbvl,gpex40-pcie"; + reg = <0xb0000000 0x00010000>, + <0xa0000000 0x00001000>, + <0xff000000 0x00200000>, + <0xb0010000 0x00001000>; + reg-names = "csr_axi_slave", + "config_axi_slave", + "gpio_slave", + "apb_csr"; + ranges = <0x83000000 0 0x00000000 0xa8000000 0 0x8000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + apio-wins = <2>; + ppio-wins = <1>; + bus-range = <0x00 0xff>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 0 &pci_express 0>, + <0 0 0 1 &pci_express 1>, + <0 0 0 2 &pci_express 2>, + <0 0 0 3 &pci_express 3>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + pcie@3400000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x80 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + apio-wins = <8>; + ppio-wins = <8>; + dma-coherent; + bus-range = <0x00 0xff>; + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml index 2e1547569702..103574d18dbc 100644 --- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml @@ -50,6 +50,8 @@ properties: items: pattern: '^fic[0-3]$' + dma-coherent: true + ranges: minItems: 1 maxItems: 3 diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt deleted file mode 100644 index 64156993e052..000000000000 --- a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt +++ /dev/null @@ -1,72 +0,0 @@ -* Mobiveil AXI PCIe Root Port Bridge DT description - -Mobiveil's GPEX 4.0 is a PCIe Gen4 root port bridge IP. This configurable IP -has up to 8 outbound and inbound windows for the address translation. - -Required properties: -- #address-cells: Address representation for root ports, set to <3> -- #size-cells: Size representation for root ports, set to <2> -- #interrupt-cells: specifies the number of cells needed to encode an - interrupt source. The value must be 1. -- compatible: Should contain "mbvl,gpex40-pcie" -- reg: Should contain PCIe registers location and length - Mandatory: - "config_axi_slave": PCIe controller registers - "csr_axi_slave" : Bridge config registers - Optional: - "gpio_slave" : GPIO registers to control slot power - "apb_csr" : MSI registers - -- device_type: must be "pci" -- apio-wins : number of requested apio outbound windows - default 2 outbound windows are configured - - 1. Config window - 2. Memory window -- ppio-wins : number of requested ppio inbound windows - default 1 inbound memory window is configured. -- bus-range: PCI bus numbers covered -- interrupt-controller: identifies the node as an interrupt controller -- #interrupt-cells: specifies the number of cells needed to encode an - interrupt source. The value must be 1. -- interrupts: The interrupt line of the PCIe controller - last cell of this field is set to 4 to - denote it as IRQ_TYPE_LEVEL_HIGH type interrupt. -- interrupt-map-mask, - interrupt-map: standard PCI properties to define the mapping of the - PCI interface to interrupt numbers. -- ranges: ranges for the PCI memory regions (I/O space region is not - supported by hardware) - Please refer to the standard PCI bus binding document for a more - detailed explanation - - -Example: -++++++++ - pcie0: pcie@a0000000 { - #address-cells = <3>; - #size-cells = <2>; - compatible = "mbvl,gpex40-pcie"; - reg = <0xa0000000 0x00001000>, - <0xb0000000 0x00010000>, - <0xff000000 0x00200000>, - <0xb0010000 0x00001000>; - reg-names = "config_axi_slave", - "csr_axi_slave", - "gpio_slave", - "apb_csr"; - device_type = "pci"; - apio-wins = <2>; - ppio-wins = <1>; - bus-range = <0x00000000 0x000000ff>; - interrupt-controller; - interrupt-parent = <&gic>; - #interrupt-cells = <1>; - interrupts = < 0 89 4 >; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 0 &pci_express 0>, - <0 0 0 1 &pci_express 1>, - <0 0 0 2 &pci_express 2>, - <0 0 0 3 &pci_express 3>; - ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>; - - }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml index 2b5498a35dcc..dbce671ba011 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml @@ -57,9 +57,10 @@ properties: interrupts: minItems: 8 - maxItems: 8 + maxItems: 9 interrupt-names: + minItems: 8 items: - const: msi0 - const: msi1 @@ -69,6 +70,7 @@ properties: - const: msi5 - const: msi6 - const: msi7 + - const: global resets: minItems: 1 @@ -139,9 +141,10 @@ examples: <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + "msi4", "msi5", "msi6", "msi7", "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml index bd87f6b49d68..7235d6554cfb 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -32,6 +32,10 @@ properties: - qcom,pcie-sdm845 - qcom,pcie-sdx55 - items: + - enum: + - qcom,pcie-ipq5424 + - const: qcom,pcie-ipq9574 + - items: - const: qcom,pcie-msm8998 - const: qcom,pcie-msm8996 diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml index 989fb0fa2577..b63a759ec2d7 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml @@ -17,6 +17,7 @@ properties: enum: - xlnx,versal-cpm-host-1.00 - xlnx,versal-cpm5-host + - xlnx,versal-cpm5-host1 reg: items: diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml index 6d6d211883ae..daee0c0fc915 100644 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml @@ -113,11 +113,8 @@ allOf: maxItems: 1 - if: - properties: - compatible: - contains: - enum: - - fsl,imx95-usb-phy + required: + - orientation-switch then: $ref: /schemas/usb/usb-switch.yaml# diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml index d3cd7997879f..1b3de6678c08 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml @@ -13,6 +13,7 @@ properties: compatible: enum: - rockchip,rk3568-naneng-combphy + - rockchip,rk3576-naneng-combphy - rockchip,rk3588-naneng-combphy reg: diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml index 58ce2d91d28c..f60804687412 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml @@ -15,12 +15,21 @@ description: properties: compatible: - enum: - - qcom,ipq6018-qmp-pcie-phy - - qcom,ipq8074-qmp-gen3-pcie-phy - - qcom,ipq8074-qmp-pcie-phy - - qcom,ipq9574-qmp-gen3x1-pcie-phy - - qcom,ipq9574-qmp-gen3x2-pcie-phy + oneOf: + - enum: + - qcom,ipq6018-qmp-pcie-phy + - qcom,ipq8074-qmp-gen3-pcie-phy + - qcom,ipq8074-qmp-pcie-phy + - qcom,ipq9574-qmp-gen3x1-pcie-phy + - qcom,ipq9574-qmp-gen3x2-pcie-phy + - items: + - enum: + - qcom,ipq5424-qmp-gen3x1-pcie-phy + - const: qcom,ipq9574-qmp-gen3x1-pcie-phy + - items: + - enum: + - qcom,ipq5424-qmp-gen3x2-pcie-phy + - const: qcom,ipq9574-qmp-gen3x2-pcie-phy reg: items: diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 4aed4b5d65ec..39851ba9de43 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -18,6 +18,7 @@ properties: oneOf: - items: - enum: + - qcom,ipq5424-qusb2-phy - qcom,ipq6018-qusb2-phy - qcom,ipq8074-qusb2-phy - qcom,ipq9574-qusb2-phy diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml index 13fdf5f1beba..89391649e0b5 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml @@ -16,8 +16,10 @@ description: properties: compatible: enum: + - qcom,qcs615-qmp-gen3x1-pcie-phy - qcom,sa8775p-qmp-gen4x2-pcie-phy - qcom,sa8775p-qmp-gen4x4-pcie-phy + - qcom,sar2130p-qmp-gen3x2-pcie-phy - qcom,sc8180x-qmp-pcie-phy - qcom,sc8280xp-qmp-gen3x1-pcie-phy - qcom,sc8280xp-qmp-gen3x2-pcie-phy @@ -32,6 +34,7 @@ properties: - qcom,sm8250-qmp-gen3x2-pcie-phy - qcom,sm8250-qmp-modem-pcie-phy - qcom,sm8350-qmp-gen3x1-pcie-phy + - qcom,sm8350-qmp-gen3x2-pcie-phy - qcom,sm8450-qmp-gen3x1-pcie-phy - qcom,sm8450-qmp-gen4x2-pcie-phy - qcom,sm8550-qmp-gen3x2-pcie-phy @@ -139,6 +142,7 @@ allOf: compatible: contains: enum: + - qcom,sar2130p-qmp-gen3x2-pcie-phy - qcom,sc8180x-qmp-pcie-phy - qcom,sdm845-qhp-pcie-phy - qcom,sdm845-qmp-pcie-phy @@ -149,6 +153,7 @@ allOf: - qcom,sm8250-qmp-gen3x2-pcie-phy - qcom,sm8250-qmp-modem-pcie-phy - qcom,sm8350-qmp-gen3x1-pcie-phy + - qcom,sm8350-qmp-gen3x2-pcie-phy - qcom,sm8450-qmp-gen3x1-pcie-phy - qcom,sm8450-qmp-gen3x2-pcie-phy - qcom,sm8550-qmp-gen3x2-pcie-phy @@ -167,6 +172,7 @@ allOf: compatible: contains: enum: + - qcom,qcs615-qmp-gen3x1-pcie-phy - qcom,sc8280xp-qmp-gen3x1-pcie-phy - qcom,sc8280xp-qmp-gen3x2-pcie-phy - qcom,sc8280xp-qmp-gen3x4-pcie-phy diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml index baf5134ea3d8..a1b55168e050 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml @@ -16,6 +16,7 @@ description: properties: compatible: enum: + - qcom,ipq5424-qmp-usb3-phy - qcom,ipq6018-qmp-usb3-phy - qcom,ipq8074-qmp-usb3-phy - qcom,ipq9574-qmp-usb3-phy @@ -89,6 +90,7 @@ allOf: compatible: contains: enum: + - qcom,ipq5424-qmp-usb3-phy - qcom,ipq6018-qmp-usb3-phy - qcom,ipq8074-qmp-usb3-phy - qcom,ipq9574-qmp-usb3-phy diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml index 2d0d7e9e6431..358a6736a951 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml @@ -16,6 +16,7 @@ description: properties: compatible: enum: + - qcom,sar2130p-qmp-usb3-dp-phy - qcom,sc7180-qmp-usb3-dp-phy - qcom,sc7280-qmp-usb3-dp-phy - qcom,sc8180x-qmp-usb3-dp-phy @@ -127,6 +128,7 @@ allOf: properties: compatible: enum: + - qcom,sar2130p-qmp-usb3-dp-phy - qcom,sc8280xp-qmp-usb43dp-phy - qcom,sm6350-qmp-usb3-dp-phy - qcom,sm8550-qmp-usb3-dp-phy diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index 450240570314..990b78765427 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -44,6 +44,7 @@ properties: - allwinner,sun8i-r40-pinctrl - allwinner,sun8i-v3-pinctrl - allwinner,sun8i-v3s-pinctrl + - allwinner,sun8i-v853-pinctrl - allwinner,sun9i-a80-pinctrl - allwinner,sun9i-a80-r-pinctrl - allwinner,sun20i-d1-pinctrl @@ -183,6 +184,18 @@ allOf: properties: compatible: enum: + - allwinner,sun8i-v853-pinctrl + + then: + properties: + interrupts: + minItems: 8 + maxItems: 8 + + - if: + properties: + compatible: + enum: - allwinner,sun20i-d1-pinctrl then: diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml index 1bb386b42039..a7ede29c1444 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml @@ -145,40 +145,40 @@ additionalProperties: examples: - | - #include <dt-bindings/clock/at91.h> - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/pinctrl/at91.h> - - pinctrl@fffff400 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; - ranges = <0xfffff400 0xfffff400 0x600>; - - atmel,mux-mask = < - /* A B */ - 0xffffffff 0xffc00c3b /* pioA */ - 0xffffffff 0x7fff3ccf /* pioB */ - 0xffffffff 0x007fffff /* pioC */ - >; - - dbgu { - pinctrl_dbgu: dbgu-0 { - atmel,pins = - <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP - AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; - }; - }; - - pioA: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; - }; - }; + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/pinctrl/at91.h> + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; + ranges = <0xfffff400 0xfffff400 0x600>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc00c3b /* pioA */ + 0xffffffff 0x7fff3ccf /* pioB */ + 0xffffffff 0x007fffff /* pioC */ + >; + + dbgu { + dbgu-0 { + atmel,pins = + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml new file mode 100644 index 000000000000..26dfe7e7735a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml @@ -0,0 +1,575 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7988-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7988 Pin Controller + +maintainers: + - Sean Wang <sean.wang@kernel.org> + +description: + The MediaTek's MT7988 Pin controller is used to control SoC pins. + +properties: + compatible: + enum: + - mediatek,mt7988-pinctrl + + reg: + minItems: 7 + maxItems: 7 + + reg-names: + items: + - const: gpio + - const: iocfg_tr + - const: iocfg_br + - const: iocfg_rb + - const: iocfg_lb + - const: iocfg_tl + - const: eint + + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + minItems: 1 + maxItems: 5 + description: + GPIO valid number range. + + interrupt-controller: true + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - reg-names + - gpio-controller + - "#gpio-cells" + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + properties: + mux: + type: object + additionalProperties: false + $ref: /schemas/pinctrl/pinmux-node.yaml + description: | + pinmux configuration nodes. + + The following table shows the effective values of "group", "function" + properties and chip pinout pins + + groups function pins (in pin#) + --------------------------------------------------------------------- + "tops_jtag0_0" "jtag" 0, 1, 2, 3, 4 + "wo0_jtag" "jtag" 50, 51, 52, 53, 54 + "wo1_jtag" "jtag" 50, 51, 52, 53, 54 + "wo2_jtag" "jtag" 50, 51, 52, 53, 54 + "jtag" "jtag" 58, 59, 60, 61, 62 + "tops_jtag0_1" "jtag" 58, 59, 60, 61, 62 + "int_usxgmii" "int_usxgmii" 2, 3 + "pwm0" "pwm" 57 + "pwm1" "pwm" 21 + "pwm2" "pwm" 80 + "pwm2_0" "pwm" 58 + "pwm3" "pwm" 81 + "pwm3_0" "pwm" 59 + "pwm4" "pwm" 82 + "pwm4_0" "pwm" 60 + "pwm5" "pwm" 83 + "pwm5_0" "pwm" 61 + "pwm6" "pwm" 69 + "pwm6_0" "pwm" 62 + "pwm7" "pwm" 70 + "pwm7_0" "pwm" 4 + "dfd" "dfd" 0, 1, 2, 3, 4 + "xfi_phy0_i2c0" "i2c" 0, 1 + "xfi_phy1_i2c0" "i2c" 0, 1 + "xfi_phy_pll_i2c0" "i2c" 3, 4 + "xfi_phy_pll_i2c1" "i2c" 3, 4 + "i2c0_0" "i2c" 5, 6 + "i2c1_sfp" "i2c" 5, 6 + "xfi_pextp_phy0_i2c" "i2c" 5, 6 + "xfi_pextp_phy1_i2c" "i2c" 5, 6 + "i2c0_1" "i2c" 15, 16 + "u30_phy_i2c0" "i2c" 15, 16 + "u32_phy_i2c0" "i2c" 15, 16 + "xfi_phy0_i2c1" "i2c" 15, 16 + "xfi_phy1_i2c1" "i2c" 15, 16 + "xfi_phy_pll_i2c2" "i2c" 15, 16 + "i2c1_0" "i2c" 17, 18 + "u30_phy_i2c1" "i2c" 17, 18 + "u32_phy_i2c1" "i2c" 17, 18 + "xfi_phy_pll_i2c3" "i2c" 17, 18 + "sgmii0_i2c" "i2c" 17, 18 + "sgmii1_i2c" "i2c" 17, 18 + "i2c1_2" "i2c" 69, 70 + "i2c2_0" "i2c" 69, 70 + "i2c2_1" "i2c" 71, 72 + "mdc_mdio0" "eth" 5, 6 + "2p5g_ext_mdio" "eth" 28, 29 + "gbe_ext_mdio" "eth" 30, 31 + "mdc_mdio1" "eth" 69, 70 + "pcie_wake_n0_0" "pcie" 7 + "pcie_clk_req_n0_0" "pcie" 8 + "pcie_wake_n3_0" "pcie" 9 + "pcie_clk_req_n3" "pcie" 10 + "pcie_clk_req_n0_1" "pcie" 10 + "pcie_p0_phy_i2c" "pcie" 7, 8 + "pcie_p1_phy_i2c" "pcie" 7, 8 + "pcie_p3_phy_i2c" "pcie" 9, 10 + "pcie_p2_phy_i2c" "pcie" 7, 8 + "ckm_phy_i2c" "pcie" 9, 10 + "pcie_wake_n0_1" "pcie" 13 + "pcie_wake_n3_1" "pcie" 14 + "pcie_2l_0_pereset" "pcie" 19 + "pcie_1l_1_pereset" "pcie" 20 + "pcie_clk_req_n2_1" "pcie" 63 + "pcie_2l_1_pereset" "pcie" 73 + "pcie_1l_0_pereset" "pcie" 74 + "pcie_wake_n1_0" "pcie" 75 + "pcie_clk_req_n1" "pcie" 76 + "pcie_wake_n2_0" "pcie" 77 + "pcie_clk_req_n2_0" "pcie" 78 + "pcie_wake_n2_1" "pcie" 79 + "pmic" "pmic" 11 + "watchdog" "watchdog" 12 + "spi0_wp_hold" "spi" 22, 23 + "spi0" "spi" 24, 25, 26, 27 + "spi1" "spi" 28, 29, 30, 31 + "spi2" "spi" 32, 33, 34, 35 + "spi2_wp_hold" "spi" 36, 37 + "snfi" "flash" 22, 23, 24, 25, 26, 27 + "emmc_45" "flash" 21, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37 + "sdcard" "flash" 32, 33, 34, 35, 36, 37 + "emmc_51" "flash" 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49 + "uart2" "uart" 0, 1, 2, 3 + "tops_uart0_0" "uart" 22, 23 + "uart2_0" "uart" 28, 29, 30, 31 + "uart1_0" "uart" 32, 33, 34, 35 + "uart2_1" "uart" 32, 33, 34, 35 + "net_wo0_uart_txd_0" "uart" 28 + "net_wo1_uart_txd_0" "uart" 29 + "net_wo2_uart_txd_0" "uart" 30 + "tops_uart1_0" "uart" 28, 29 + "tops_uart0_1" "uart" 30, 31 + "tops_uart1_1" "uart" 36, 37 + "uart0" "uart" 55, 56 + "tops_uart0_2" "uart" 55, 56 + "uart2_2" "uart" 50, 51, 52, 53 + "uart1_1" "uart" 58, 59, 60, 61 + "uart2_3" "uart" 58, 59, 60, 61 + "uart1_2" "uart" 80, 81, 82, 83 + "uart1_2_lite" "uart" 80, 81 + "tops_uart1_2" "uart" 80, 81 + "net_wo0_uart_txd_1" "uart" 80 + "net_wo1_uart_txd_1" "uart" 81 + "net_wo2_uart_txd_1" "uart" 82 + "udi" "udi" 32, 33, 34, 35, 36 + "i2s" "audio" 50, 51, 52, 53, 54 + "pcm" "audio" 50, 51, 52, 53 + "gbe0_led1" "led" 58 + "gbe1_led1" "led" 59 + "gbe2_led1" "led" 60 + "gbe3_led1" "led" 61 + "2p5gbe_led1" "led" 62 + "gbe0_led0" "led" 64 + "gbe1_led0" "led" 65 + "gbe2_led0" "led" 66 + "gbe3_led0" "led" 67 + "2p5gbe_led0" "led" 68 + "drv_vbus_p1" "usb" 63 + "drv_vbus" "usb" 79 + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [audio, dfd, eth, flash, i2c, int_usxgmii, jtag, led, pcie, pmic, pwm, spi, + uart, udi, usb, watchdog] + groups: + description: + An array of strings. Each string contains the name of a group. + + required: + - function + - groups + + allOf: + - if: + properties: + function: + const: audio + then: + properties: + groups: + enum: [i2s, pcm] + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag, tops_jtag0_0, tops_jtag0_1, wo0_jtag, wo1_jtag, wo2_jtag] + - if: + properties: + function: + const: int_usxgmii + then: + properties: + groups: + const: int_usxgmii + - if: + properties: + function: + const: dfd + then: + properties: + groups: + const: dfd + - if: + properties: + function: + const: flash + then: + properties: + groups: + enum: [emmc_45, emmc_51, sdcard, snfi] + - if: + properties: + function: + const: eth + then: + properties: + groups: + enum: [2p5g_ext_mdio, gbe_ext_mdio, mdc_mdio0, mdc_mdio1] + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [xfi_phy0_i2c0, xfi_phy1_i2c0, xfi_phy_pll_i2c0, + xfi_phy_pll_i2c1, i2c0_0, i2c1_sfp, xfi_pextp_phy0_i2c, + xfi_pextp_phy1_i2c, i2c0_1, u30_phy_i2c0, u32_phy_i2c0, + xfi_phy0_i2c1, xfi_phy1_i2c1, xfi_phy_pll_i2c2, i2c1_0, + u30_phy_i2c1, u32_phy_i2c1, xfi_phy_pll_i2c3, sgmii0_i2c, + sgmii1_i2c, i2c1_2, i2c2_0, i2c2_1] + - if: + properties: + function: + const: led + then: + properties: + groups: + enum: [2p5gbe_led0, 2p5gbe_led1, gbe0_led0, gbe0_led1, gbe1_led0, gbe1_led1, + gbe2_led0, gbe2_led1, gbe3_led0, gbe3_led1, wf5g_led0, wf5g_led1] + - if: + properties: + function: + const: pcie + then: + properties: + groups: + items: + enum: [pcie_wake_n0_0, pcie_clk_req_n0_0, pcie_wake_n3_0, + pcie_clk_req_n3, pcie_p0_phy_i2c, pcie_p1_phy_i2c, + pcie_p3_phy_i2c, pcie_p2_phy_i2c, ckm_phy_i2c, + pcie_wake_n0_1, pcie_wake_n3_1, pcie_2l_0_pereset, + pcie_1l_1_pereset, pcie_clk_req_n2_1, pcie_2l_1_pereset, + pcie_1l_0_pereset, pcie_wake_n1_0, pcie_clk_req_n1, + pcie_wake_n2_0, pcie_clk_req_n2_0, pcie_wake_n2_1, + pcie_clk_req_n0_1] + maxItems: 3 + - if: + properties: + function: + const: pmic + then: + properties: + groups: + const: pmic + - if: + properties: + function: + const: pwm + then: + properties: + groups: + items: + enum: [pwm0, pwm1, pwm2, pwm2_0, pwm3, pwm3_0, pwm4, pwm4_0, pwm5, pwm5_0, + pwm6, pwm6_0, pwm7, pwm7_0] + maxItems: 2 + - if: + properties: + function: + const: spi + then: + properties: + groups: + items: + enum: [spi0, spi0_wp_hold, spi1, spi2, spi2_wp_hold] + maxItems: 2 + - if: + properties: + function: + const: uart + then: + properties: + groups: + items: + enum: [net_wo0_uart_txd_0, net_wo0_uart_txd_1, net_wo1_uart_txd_0, + net_wo1_uart_txd_1, net_wo2_uart_txd_0, net_wo2_uart_txd_1, + tops_uart0_0, tops_uart0_1, tops_uart0_2, tops_uart1_0, + tops_uart1_1, tops_uart1_2, uart0, uart1_0, uart1_1, uart1_2, + uart1_2_lite, uart2, uart2_0, uart2_1, uart2_3] + maxItems: 2 + - if: + properties: + function: + const: watchdog + then: + properties: + groups: + const: watchdog + - if: + properties: + function: + const: udi + then: + properties: + groups: + const: udi + - if: + properties: + function: + const: usb + then: + properties: + groups: + items: + enum: [drv_vbus, drv_vbus_p1] + maxItems: 1 + + patternProperties: + '^conf(-[-a-z]*)?$': + type: object + additionalProperties: false + description: + pinconf configuration nodes. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + An array of strings. Each string contains the name of a pin. + items: + enum: [UART2_RXD, UART2_TXD, UART2_CTS, UART2_RTS, GPIO_A, SMI_0_MDC, + SMI_0_MDIO, PCIE30_2L_0_WAKE_N, PCIE30_2L_0_CLKREQ_N, + PCIE30_1L_1_WAKE_N, PCIE30_1L_1_CLKREQ_N, GPIO_P, WATCHDOG, + GPIO_RESET, GPIO_WPS, PMIC_I2C_SCL, PMIC_I2C_SDA, I2C_1_SCL, + I2C_1_SDA, PCIE30_2L_0_PRESET_N, PCIE30_1L_1_PRESET_N, PWMD1, + SPI0_WP, SPI0_HOLD, SPI0_CSB, SPI0_MISO, SPI0_MOSI, SPI0_CLK, + SPI1_CSB, SPI1_MISO, SPI1_MOSI, SPI1_CLK, SPI2_CLK, SPI2_MOSI, + SPI2_MISO, SPI2_CSB, SPI2_HOLD, SPI2_WP, EMMC_RSTB, EMMC_DSL, + EMMC_CK, EMMC_CMD, EMMC_DATA_7, EMMC_DATA_6, EMMC_DATA_5, + EMMC_DATA_4, EMMC_DATA_3, EMMC_DATA_2, EMMC_DATA_1, + EMMC_DATA_0, PCM_FS_I2S_LRCK, PCM_CLK_I2S_BCLK, + PCM_DRX_I2S_DIN, PCM_DTX_I2S_DOUT, PCM_MCK_I2S_MCLK, + UART0_RXD, UART0_TXD, PWMD0, JTAG_JTDI, JTAG_JTDO, JTAG_JTMS, + JTAG_JTCLK, JTAG_JTRST_N, USB_DRV_VBUS_P1, LED_A, LED_B, LED_C, + LED_D, LED_E, GPIO_B, GPIO_C, I2C_2_SCL, I2C_2_SDA, + PCIE30_2L_1_PRESET_N, PCIE30_1L_0_PRESET_N, + PCIE30_2L_1_WAKE_N, PCIE30_2L_1_CLKREQ_N, + PCIE30_1L_0_WAKE_N, PCIE30_1L_0_CLKREQ_N, USB_DRV_VBUS_P0, + UART1_RXD, UART1_TXD, UART1_CTS, UART1_RTS] + maxItems: 84 + + bias-disable: true + + bias-pull-up: + oneOf: + - type: boolean + description: normal pull up. + - enum: [100, 101, 102, 103] + description: + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. + + bias-pull-down: + oneOf: + - type: boolean + description: normal pull down. + - enum: [100, 101, 102, 103] + description: + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. + + input-enable: true + + input-disable: true + + output-enable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + mediatek,pull-up-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull up settings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull down settings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + required: + - pins + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt65xx.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pio: pinctrl@1001f000 { + compatible = "mediatek,mt7988-pinctrl"; + reg = <0 0x1001f000 0 0x1000>, + <0 0x11c10000 0 0x1000>, + <0 0x11d00000 0 0x1000>, + <0 0x11d20000 0 0x1000>, + <0 0x11e00000 0 0x1000>, + <0 0x11f00000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "gpio", "iocfg_tr", + "iocfg_br", "iocfg_rb", + "iocfg_lb", "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 84>; + interrupt-controller; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + + i2c0_pins: i2c0-g0-pins { + mux { + function = "i2c"; + groups = "i2c0_1"; + }; + }; + + mdio0_pins: mdio0-pins { + mux { + function = "eth"; + groups = "mdc_mdio0"; + }; + + conf { + pins = "SMI_0_MDC", "SMI_0_MDIO"; + drive-strength = <8>; + }; + }; + + mmc0_pins_emmc_51: mmc0-emmc-51-pins { + mux { + function = "flash"; + groups = "emmc_51"; + }; + }; + + mmc0_pins_sdcard: mmc0-sdcard-pins { + mux { + function = "flash"; + groups = "sdcard"; + }; + }; + + pcie0_pins: pcie0-pins { + mux { + function = "pcie"; + groups = "pcie_2l_0_pereset", "pcie_clk_req_n0_0", + "pcie_wake_n0_0"; + }; + }; + + pcie1_pins: pcie1-pins { + mux { + function = "pcie"; + groups = "pcie_2l_1_pereset", "pcie_clk_req_n1", + "pcie_wake_n1_0"; + }; + }; + + pcie2_pins: pcie2-pins { + mux { + function = "pcie"; + groups = "pcie_1l_0_pereset", "pcie_clk_req_n2_0", + "pcie_wake_n2_0"; + }; + }; + + pcie3_pins: pcie3-pins { + mux { + function = "pcie"; + groups = "pcie_1l_1_pereset", "pcie_clk_req_n3", + "pcie_wake_n3_0"; + }; + }; + + uart0_pins: uart0-pins { + mux { + function = "uart"; + groups = "uart0"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml index 5e64a232fc7a..df284d3645c1 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml @@ -79,8 +79,8 @@ $defs: qdss_cti_trig_out_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_tracectl_a, qdss_tracedata_a, qspi_clk, qspi_cs, qspi_data, resout, rx0, rx1, rx2, sdc_clk, sdc_cmd, - sdc_data, spi0, spi1, spi10, spi11, tsens_max, uart0, uart1, - wci_txd, wci_rxd, wsi_clk, wsi_data ] + sdc_data, spi0_cs, spi0_clk, spi0_miso, spi0_mosi, spi1, spi10, + spi11, tsens_max, uart0, uart1, wci_txd, wci_rxd, wsi_clk, wsi_data ] required: - pins diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8917-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8917-pinctrl.yaml new file mode 100644 index 000000000000..16d0c010e581 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8917-pinctrl.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8917-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8917 TLMM pin controller + +maintainers: + - Barnabas Czeman <barnabas.czeman@mainlining.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8917 SoC. + +properties: + compatible: + const: qcom,msm8917-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 66 + + gpio-line-names: + maxItems: 134 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8917-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8917-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8917-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-3])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, + qdsd_data1, qdsd_data2, qdsd_data3 ] + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ accel_int, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, + atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, atest_combodac_to_gpio_native, + atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native, + atest_tsens, atest_wlan0, atest_wlan1, audio_ref, + audio_reset, bimc_dte0, bimc_dte1, blsp6_spi, blsp8_spi, + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, + blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_spi1, blsp_spi2, + blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, + blsp_spi8, blsp_uart1, blsp_uart2, blsp_uart3, blsp_uart4, + blsp_uart5, blsp_uart6, blsp_uart7, blsp_uart8, cam0_ldo, + cam1_rst, cam1_standby, cam2_rst, cam2_standby, cam_mclk, + cci_async, cci_i2c, cci_timer0, cci_timer1, cdc_pdm0, + codec_int1, codec_int2, codec_mad, coex_uart, cri_trng, + cri_trng0, cri_trng1, dbg_out, dmic0_clk, dmic0_data, + ebi_cdc, ebi_ch0, ext_lpass, forced_usb, fp_gpio, fp_int, + gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, + gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gpio, + gsm0_tx, key_focus, key_snapshot, key_volp, ldo_en, + ldo_update, lpass_slimbus, lpass_slimbus0, lpass_slimbus1, + m_voc, mag_int, mdp_vsync, mipi_dsi0, modem_tsync, nav_pps, + nav_pps_in_a, nav_pps_in_b, nav_tsync, nfc_pwr, ov_ldo, + pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, pri_mi2s_mclk_a, + pri_mi2s_mclk_b, pri_mi2s_ws, prng_rosc, + pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, sd_write, sdcard_det, + sec_mi2s, sec_mi2s_mclk_a, sec_mi2s_mclk_b, sensor_rst, + smb_int, ssbi_wtr1, ts_resout, ts_sample, uim1_clk, + uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, uim_batt, us_emitter, us_euro, + wcss_bt, wcss_fm, wcss_wlan, wcss_wlan0, wcss_wlan1, + wcss_wlan2, webcam_rst, webcam_standby, wsa_io, wsa_irq ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8917-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 134>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml index fc6c65fea73b..90bd49d87d2e 100644 --- a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml @@ -159,30 +159,30 @@ additionalProperties: false examples: - | - pinctrl@4e000 { - compatible = "realtek,rtd1315e-pinctrl"; - reg = <0x4e000 0x130>; - - emmc-hs200-pins { - pins = "emmc_clk", - "emmc_cmd", - "emmc_data_0", - "emmc_data_1", - "emmc_data_2", - "emmc_data_3", - "emmc_data_4", - "emmc_data_5", - "emmc_data_6", - "emmc_data_7"; - function = "emmc"; - realtek,drive-strength-p = <0x2>; - realtek,drive-strength-n = <0x2>; - }; - - i2c-0-pins { - pins = "gpio_12", - "gpio_13"; - function = "i2c0"; - drive-strength = <4>; - }; - }; + pinctrl@4e000 { + compatible = "realtek,rtd1315e-pinctrl"; + reg = <0x4e000 0x130>; + + emmc-hs200-pins { + pins = "emmc_clk", + "emmc_cmd", + "emmc_data_0", + "emmc_data_1", + "emmc_data_2", + "emmc_data_3", + "emmc_data_4", + "emmc_data_5", + "emmc_data_6", + "emmc_data_7"; + function = "emmc"; + realtek,drive-strength-p = <0x2>; + realtek,drive-strength-n = <0x2>; + }; + + i2c-0-pins { + pins = "gpio_12", + "gpio_13"; + function = "i2c0"; + drive-strength = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml index f07361d60acd..b6211c8544ca 100644 --- a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml @@ -158,30 +158,30 @@ additionalProperties: false examples: - | - pinctrl@4e000 { - compatible = "realtek,rtd1319d-pinctrl"; - reg = <0x4e000 0x130>; - - emmc-hs200-pins { - pins = "emmc_clk", - "emmc_cmd", - "emmc_data_0", - "emmc_data_1", - "emmc_data_2", - "emmc_data_3", - "emmc_data_4", - "emmc_data_5", - "emmc_data_6", - "emmc_data_7"; - function = "emmc"; - realtek,drive-strength-p = <0x2>; - realtek,drive-strength-n = <0x2>; - }; - - i2c-0-pins { - pins = "gpio_12", - "gpio_13"; - function = "i2c0"; - drive-strength = <4>; - }; - }; + pinctrl@4e000 { + compatible = "realtek,rtd1319d-pinctrl"; + reg = <0x4e000 0x130>; + + emmc-hs200-pins { + pins = "emmc_clk", + "emmc_cmd", + "emmc_data_0", + "emmc_data_1", + "emmc_data_2", + "emmc_data_3", + "emmc_data_4", + "emmc_data_5", + "emmc_data_6", + "emmc_data_7"; + function = "emmc"; + realtek,drive-strength-p = <0x2>; + realtek,drive-strength-n = <0x2>; + }; + + i2c-0-pins { + pins = "gpio_12", + "gpio_13"; + function = "i2c0"; + drive-strength = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml index 671e4ec84624..e88bc649cc73 100644 --- a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml @@ -157,30 +157,30 @@ additionalProperties: false examples: - | - pinctrl@4e000 { - compatible = "realtek,rtd1619b-pinctrl"; - reg = <0x4e000 0x130>; - - emmc-hs200-pins { - pins = "emmc_clk", - "emmc_cmd", - "emmc_data_0", - "emmc_data_1", - "emmc_data_2", - "emmc_data_3", - "emmc_data_4", - "emmc_data_5", - "emmc_data_6", - "emmc_data_7"; - function = "emmc"; - realtek,drive-strength-p = <0x2>; - realtek,drive-strength-n = <0x2>; - }; - - i2c-0-pins { - pins = "gpio_12", - "gpio_13"; - function = "i2c0"; - drive-strength = <4>; - }; - }; + pinctrl@4e000 { + compatible = "realtek,rtd1619b-pinctrl"; + reg = <0x4e000 0x130>; + + emmc-hs200-pins { + pins = "emmc_clk", + "emmc_cmd", + "emmc_data_0", + "emmc_data_1", + "emmc_data_2", + "emmc_data_3", + "emmc_data_4", + "emmc_data_5", + "emmc_data_6", + "emmc_data_7"; + function = "emmc"; + realtek,drive-strength-p = <0x2>; + realtek,drive-strength-n = <0x2>; + }; + + i2c-0-pins { + pins = "gpio_12", + "gpio_13"; + function = "i2c0"; + drive-strength = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index a1805b6e3f63..768bb3c2b456 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -26,6 +26,7 @@ properties: - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} - renesas,r9a08g045-pinctrl # RZ/G3S + - renesas,r9a09g047-pinctrl # RZ/G3E - renesas,r9a09g057-pinctrl # RZ/V2H(P) - items: @@ -125,7 +126,7 @@ additionalProperties: drive-push-pull: true renesas,output-impedance: description: - Output impedance for pins on the RZ/V2H(P) SoC. The value provided by this + Output impedance for pins on the RZ/{G3E,V2H(P)} SoC. The value provided by this property corresponds to register bit values that can be set in the PFC_IOLH_mn register, which adjusts the drive strength value and is pin-dependent. $ref: /schemas/types.yaml#/definitions/uint32 @@ -142,7 +143,9 @@ allOf: properties: compatible: contains: - const: renesas,r9a09g057-pinctrl + enum: + - renesas,r9a09g047-pinctrl + - renesas,r9a09g057-pinctrl then: properties: resets: diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml index 6a23d845f1f2..80a2b1934849 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -44,6 +44,7 @@ properties: - rockchip,rk3328-pinctrl - rockchip,rk3368-pinctrl - rockchip,rk3399-pinctrl + - rockchip,rk3562-pinctrl - rockchip,rk3568-pinctrl - rockchip,rk3576-pinctrl - rockchip,rk3588-pinctrl diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml index de6c10ba36c4..70548cb37ada 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,pinctrl-zynq.yaml @@ -180,38 +180,31 @@ additionalProperties: false examples: - | #include <dt-bindings/pinctrl/pinctrl-zynq.h> - pinctrl0: pinctrl@700 { - compatible = "xlnx,pinctrl-zynq"; - reg = <0x700 0x200>; - syscon = <&slcr>; - - pinctrl_uart1_default: uart1-default { - mux { - groups = "uart1_10_grp"; - function = "uart1"; - }; - - conf { - groups = "uart1_10_grp"; - slew-rate = <0>; - power-source = <IO_STANDARD_LVCMOS18>; - }; - - conf-rx { - pins = "MIO49"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO48"; - bias-disable; - }; - }; + pinctrl@700 { + compatible = "xlnx,pinctrl-zynq"; + reg = <0x700 0x200>; + syscon = <&slcr>; + + uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; }; - - uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_default>; - }; - -... diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.yaml b/Documentation/devicetree/bindings/power/domain-idle-state.yaml index ec1f6f669e50..4dd4f59bbbec 100644 --- a/Documentation/devicetree/bindings/power/domain-idle-state.yaml +++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml @@ -54,6 +54,11 @@ patternProperties: (i.e. idle states node with entry-method property is set to "psci") must specify this property. + idle-state-name: + $ref: /schemas/types.yaml#/definitions/string + description: + A string used as a descriptive name for the idle state. + required: - compatible - entry-latency-us diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml index 6d37c06b2f65..591a080ca3ff 100644 --- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml @@ -55,6 +55,10 @@ patternProperties: patternProperties: "^power-domain@[0-9a-f]+$": $ref: "#/$defs/power-domain-node" + patternProperties: + "^power-domain@[0-9a-f]+$": + $ref: "#/$defs/power-domain-node" + unevaluatedProperties: false unevaluatedProperties: false unevaluatedProperties: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/power/raspberrypi,bcm2835-power.yaml b/Documentation/devicetree/bindings/power/raspberrypi,bcm2835-power.yaml new file mode 100644 index 000000000000..57579f70264c --- /dev/null +++ b/Documentation/devicetree/bindings/power/raspberrypi,bcm2835-power.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/raspberrypi,bcm2835-power.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 power domain + +maintainers: + - Alexander Aring <alex.aring@gmail.com> + - Florian Fainelli <florian.fainelli@broadcom.com> + +description: + The Raspberry Pi power domain manages power for various subsystems + in the Raspberry Pi BCM2835 SoC. + +properties: + compatible: + enum: + - raspberrypi,bcm2835-power + + firmware: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference to the RPi firmware device node + + "#power-domain-cells": + const: 1 + +required: + - compatible + - firmware + - "#power-domain-cells" + +unevaluatedProperties: false + +examples: + - | + power-controller { + compatible = "raspberrypi,bcm2835-power"; + firmware = <&firmware>; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml index 8c58e12cdb60..0735ceb7c103 100644 --- a/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml +++ b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml @@ -22,6 +22,9 @@ properties: - enum: - atmel,sama5d2-shdwc - microchip,sam9x60-shdwc + - items: + - const: microchip,sam9x7-shdwc + - const: microchip,sam9x60-shdwc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml index 131b7e57d22f..07adf88997b4 100644 --- a/Documentation/devicetree/bindings/power/supply/bq24190.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml @@ -21,6 +21,7 @@ properties: - ti,bq24192i - ti,bq24196 - ti,bq24296 + - ti,bq24297 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml index 89f8e2bcb2d7..25826bfc289c 100644 --- a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml @@ -58,6 +58,10 @@ properties: charge-current-limit-gpios property. Bit 1 second to last GPIO and so on. + charge-current-limit-default-microamp: + description: Default charge current limit. Must be listed in + charge-current-limit-mapping. + required: - compatible @@ -72,6 +76,7 @@ anyOf: dependencies: charge-current-limit-gpios: [ charge-current-limit-mapping ] charge-current-limit-mapping: [ charge-current-limit-gpios ] + charge-current-limit-default-microamp: [charge-current-limit-mapping] additionalProperties: false @@ -91,4 +96,5 @@ examples: charge-current-limit-mapping = <2500000 0x00>, // 2.5 A => both GPIOs low <700000 0x01>, // 700 mA => GPIO A.12 high <0 0x02>; // 0 mA => GPIO A.11 high + charge-current-limit-default-microamp = <700000>; }; diff --git a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml index 29d536541152..06595a953659 100644 --- a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml +++ b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml @@ -17,12 +17,18 @@ description: | panels, etc., and a rechargeable Lithium-Ion/Polymer battery. Specifications about the charger can be found at: + https://www.analog.com/en/products/ltc4162-l.html + https://www.analog.com/en/products/ltc4162-f.html https://www.analog.com/en/products/ltc4162-s.html + https://www.analog.com/en/products/ltc4015.html properties: compatible: enum: + - lltc,ltc4015 + - lltc,ltc4162-f - lltc,ltc4162-l + - lltc,ltc4162-s reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml index 085e2504d0dc..14242de7fc08 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml @@ -19,6 +19,7 @@ properties: - maxim,max17047 - maxim,max17050 - maxim,max17055 + - maxim,max77705-battery - maxim,max77849-battery reg: diff --git a/Documentation/devicetree/bindings/power/supply/st,stc3117.yaml b/Documentation/devicetree/bindings/power/supply/st,stc3117.yaml new file mode 100644 index 000000000000..e486131a27a9 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/st,stc3117.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/st,stc3117.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STC3117 Fuel Gauge Unit Power Supply + +maintainers: + - Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io> + - Bhavin Sharma <bhavin.sharma@siliconsignals.io> + +description: | + The STC3117 includes the STMicroelectronics OptimGauge algorithm. + It provides accurate battery state-of-charge (SOC) monitoring, tracks + battery parameter changes with operation conditions, temperature, + and aging, and allows the application to get a battery state-of-health + (SOH) indication. + + An alarm output signals low SOC or low voltage conditions and also + indicates fault conditions like a missing or swapped battery. + + Datasheet is available at + https://www.st.com/resource/en/datasheet/stc3117.pdf + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - st,stc3117 + + reg: + maxItems: 1 + + monitored-battery: + description: | + The fuel gauge uses the following battery properties: + - charge-full-design-microamp-hours + - voltage-min-design-microvolt + - voltage-max-design-microvolt + + shunt-resistor-micro-ohms: + description: Current sense resistor + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - monitored-battery + - shunt-resistor-micro-ohms + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + battery@70 { + compatible = "st,stc3117"; + reg = <0x70>; + interrupt-parent = <&gpio0>; + interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + monitored-battery = <&bat>; + shunt-resistor-micro-ohms = <10000>; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml b/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml index aa35209f74cf..45e112d0efb4 100644 --- a/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml +++ b/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml @@ -41,8 +41,8 @@ unevaluatedProperties: false examples: - | pwm@44b00000 { - compatible = "adi,axi-pwmgen-2.00.a"; - reg = <0x44b00000 0x1000>; - clocks = <&spi_clk>; - #pwm-cells = <3>; + compatible = "adi,axi-pwmgen-2.00.a"; + reg = <0x44b00000 0x1000>; + clocks = <&spi_clk>; + #pwm-cells = <3>; }; diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml index 119de3d7f9dd..44548a9da158 100644 --- a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml @@ -35,8 +35,8 @@ additionalProperties: false examples: - | pwm: pwm@f0408000 { - compatible = "brcm,bcm7038-pwm"; - reg = <0xf0408000 0x28>; - #pwm-cells = <2>; - clocks = <&upg_fixed>; + compatible = "brcm,bcm7038-pwm"; + reg = <0xf0408000 0x28>; + #pwm-cells = <2>; + clocks = <&upg_fixed>; }; diff --git a/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml index e86c8053b366..fd785da5d3d7 100644 --- a/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml @@ -43,9 +43,9 @@ examples: #include <dt-bindings/clock/bcm281xx.h> pwm@3e01a000 { - compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; - reg = <0x3e01a000 0xcc>; - clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>; - #pwm-cells = <3>; + compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; + reg = <0x3e01a000 0xcc>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>; + #pwm-cells = <3>; }; ... diff --git a/Documentation/devicetree/bindings/pwm/marvell,berlin-pwm.yaml b/Documentation/devicetree/bindings/pwm/marvell,berlin-pwm.yaml new file mode 100644 index 000000000000..091fec03df13 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/marvell,berlin-pwm.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/marvell,berlin-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Berlin PWM controller + +maintainers: + - Jisheng Zhang <jszhang@kernel.org> + - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + +properties: + compatible: + const: marvell,berlin-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 3 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +allOf: + - $ref: pwm.yaml# + +unevaluatedProperties: false + +examples: + - | + pwm@f7f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf7f20000 0x40>; + clocks = <&chip_clk 12>; + #pwm-cells = <3>; + }; + diff --git a/Documentation/devicetree/bindings/pwm/pwm-berlin.txt b/Documentation/devicetree/bindings/pwm/pwm-berlin.txt deleted file mode 100644 index f01e993a498a..000000000000 --- a/Documentation/devicetree/bindings/pwm/pwm-berlin.txt +++ /dev/null @@ -1,17 +0,0 @@ -Berlin PWM controller - -Required properties: -- compatible: should be "marvell,berlin-pwm" -- reg: physical base address and length of the controller's registers -- clocks: phandle to the input clock -- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of - the cells format. - -Example: - -pwm: pwm@f7f20000 { - compatible = "marvell,berlin-pwm"; - reg = <0xf7f20000 0x40>; - clocks = <&chip_clk CLKID_CFG>; - #pwm-cells = <3>; -} diff --git a/Documentation/devicetree/bindings/pwm/pwm-sprd.txt b/Documentation/devicetree/bindings/pwm/pwm-sprd.txt deleted file mode 100644 index 87b206fd0618..000000000000 --- a/Documentation/devicetree/bindings/pwm/pwm-sprd.txt +++ /dev/null @@ -1,40 +0,0 @@ -Spreadtrum PWM controller - -Spreadtrum SoCs PWM controller provides 4 PWM channels. - -Required properties: -- compatible : Should be "sprd,ums512-pwm". -- reg: Physical base address and length of the controller's registers. -- clocks: The phandle and specifier referencing the controller's clocks. -- clock-names: Should contain following entries: - "pwmn": used to derive the functional clock for PWM channel n (n range: 0 ~ 3). - "enablen": for PWM channel n enable clock (n range: 0 ~ 3). -- #pwm-cells: Should be 2. See pwm.yaml in this directory for a description of - the cells format. - -Optional properties: -- assigned-clocks: Reference to the PWM clock entries. -- assigned-clock-parents: The phandle of the parent clock of PWM clock. - -Example: - pwms: pwm@32260000 { - compatible = "sprd,ums512-pwm"; - reg = <0 0x32260000 0 0x10000>; - clock-names = "pwm0", "enable0", - "pwm1", "enable1", - "pwm2", "enable2", - "pwm3", "enable3"; - clocks = <&aon_clk CLK_PWM0>, <&aonapb_gate CLK_PWM0_EB>, - <&aon_clk CLK_PWM1>, <&aonapb_gate CLK_PWM1_EB>, - <&aon_clk CLK_PWM2>, <&aonapb_gate CLK_PWM2_EB>, - <&aon_clk CLK_PWM3>, <&aonapb_gate CLK_PWM3_EB>; - assigned-clocks = <&aon_clk CLK_PWM0>, - <&aon_clk CLK_PWM1>, - <&aon_clk CLK_PWM2>, - <&aon_clk CLK_PWM3>; - assigned-clock-parents = <&ext_26m>, - <&ext_26m>, - <&ext_26m>, - <&ext_26m>; - #pwm-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/pwm/sprd,ums512-pwm.yaml b/Documentation/devicetree/bindings/pwm/sprd,ums512-pwm.yaml new file mode 100644 index 000000000000..c806b6768087 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/sprd,ums512-pwm.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/sprd,ums512-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum/Unisoc UMS512 PWM Controller + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang@linux.alibaba.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + const: sprd,ums512-pwm + + reg: + maxItems: 1 + + clocks: + maxItems: 8 + + clock-names: + items: + - const: pwm0 + - const: enable0 + - const: pwm1 + - const: enable1 + - const: pwm2 + - const: enable2 + - const: pwm3 + - const: enable3 + + '#pwm-cells': + const: 2 + +required: + - compatible + - reg + - clocks + - clock-names + +allOf: + - $ref: pwm.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/sprd,ums512-clk.h> + + pwm@32260000 { + compatible = "sprd,ums512-pwm"; + reg = <0x32260000 0x10000>; + clocks = <&aon_clk CLK_PWM0>, <&aonapb_gate CLK_PWM0_EB>, + <&aon_clk CLK_PWM1>, <&aonapb_gate CLK_PWM1_EB>, + <&aon_clk CLK_PWM2>, <&aonapb_gate CLK_PWM2_EB>, + <&aon_clk CLK_PWM3>, <&aonapb_gate CLK_PWM3_EB>; + clock-names = "pwm0", "enable0", + "pwm1", "enable1", + "pwm2", "enable2", + "pwm3", "enable3"; + #pwm-cells = <2>; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml index cd4aa27218a1..fa6743bb269d 100644 --- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml @@ -35,10 +35,6 @@ properties: $ref: regulator.yaml# unevaluatedProperties: false - properties: - regulator-compatible: - pattern: "^vbuck[1-4]$" - additionalProperties: false required: @@ -56,7 +52,6 @@ examples: regulators { vbuck1 { - regulator-compatible = "vbuck1"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; @@ -64,7 +59,6 @@ examples: }; vbuck3 { - regulator-compatible = "vbuck3"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml index f8057bba747a..68709a7dc43f 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -29,6 +29,7 @@ properties: - nxp,pca9450b - nxp,pca9450c - nxp,pca9451a + - nxp,pca9452 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml b/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml index ca401a209cca..47c425c9fff1 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml @@ -18,6 +18,7 @@ properties: compatible: enum: - qcom,qca6390-pmu + - qcom,wcn6750-pmu - qcom,wcn6855-pmu - qcom,wcn7850-pmu @@ -27,6 +28,9 @@ properties: vddaon-supply: description: VDD_AON supply regulator handle + vddasd-supply: + description: VDD_ASD supply regulator handle + vdddig-supply: description: VDD_DIG supply regulator handle @@ -42,6 +46,9 @@ properties: vddio1p2-supply: description: VDD_IO_1P2 supply regulator handle + vddrfa0p8-supply: + description: VDD_RFA_0P8 supply regulator handle + vddrfa0p95-supply: description: VDD_RFA_0P95 supply regulator handle @@ -51,12 +58,18 @@ properties: vddrfa1p3-supply: description: VDD_RFA_1P3 supply regulator handle + vddrfa1p7-supply: + description: VDD_RFA_1P7 supply regulator handle + vddrfa1p8-supply: description: VDD_RFA_1P8 supply regulator handle vddrfa1p9-supply: description: VDD_RFA_1P9 supply regulator handle + vddrfa2p2-supply: + description: VDD_RFA_2P2 supply regulator handle + vddpcie1p3-supply: description: VDD_PCIE_1P3 supply regulator handle @@ -123,6 +136,20 @@ allOf: properties: compatible: contains: + const: qcom,wcn6750-pmu + then: + required: + - vddaon-supply + - vddasd-supply + - vddpmu-supply + - vddrfa0p8-supply + - vddrfa1p2-supply + - vddrfa1p7-supply + - vddrfa2p2-supply + - if: + properties: + compatible: + contains: const: qcom,wcn6855-pmu then: required: diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index 1ef380d1515e..77573bcb6b79 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -34,6 +34,9 @@ properties: regulator-input-current-limit-microamp: description: maximum input current regulator allows + regulator-power-budget-milliwatt: + description: power budget of the regulator + regulator-always-on: description: boolean, regulator should never be disabled type: boolean diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml index 7fe401a06805..a66007951d58 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml @@ -15,12 +15,25 @@ description: properties: compatible: - enum: - - qcom,sa8775p-adsp-pas - - qcom,sa8775p-cdsp0-pas - - qcom,sa8775p-cdsp1-pas - - qcom,sa8775p-gpdsp0-pas - - qcom,sa8775p-gpdsp1-pas + oneOf: + - items: + - enum: + - qcom,qcs8300-adsp-pas + - const: qcom,sa8775p-adsp-pas + - items: + - enum: + - qcom,qcs8300-cdsp-pas + - const: qcom,sa8775p-cdsp0-pas + - items: + - enum: + - qcom,qcs8300-gpdsp-pas + - const: qcom,sa8775p-gpdsp0-pas + - enum: + - qcom,sa8775p-adsp-pas + - qcom,sa8775p-cdsp0-pas + - qcom,sa8775p-cdsp1-pas + - qcom,sa8775p-gpdsp0-pas + - qcom,sa8775p-gpdsp1-pas reg: maxItems: 1 @@ -63,8 +76,9 @@ allOf: - if: properties: compatible: - enum: - - qcom,sa8775p-adsp-pas + contains: + enum: + - qcom,sa8775p-adsp-pas then: properties: power-domains: @@ -79,9 +93,10 @@ allOf: - if: properties: compatible: - enum: - - qcom,sa8775p-cdsp0-pas - - qcom,sa8775p-cdsp1-pas + contains: + enum: + - qcom,sa8775p-cdsp0-pas + - qcom,sa8775p-cdsp1-pas then: properties: power-domains: @@ -98,9 +113,10 @@ allOf: - if: properties: compatible: - enum: - - qcom,sa8775p-gpdsp0-pas - - qcom,sa8775p-gpdsp1-pas + contains: + enum: + - qcom,sa8775p-gpdsp0-pas + - qcom,sa8775p-gpdsp1-pas then: properties: power-domains: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml index 758adb06c8dd..059cb87b4d6c 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SM6115 Peripheral Authentication Service maintainers: - - Bhupesh Sharma <bhupesh.sharma@linaro.org> + - Bjorn Andersson <andersson@kernel.org> + - Konrad Dybcio <konradybcio@kernel.org> description: Qualcomm SM6115 SoC Peripheral Authentication Service loads and boots diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt index 01db34375192..384035e8e60b 100644 --- a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt +++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt @@ -3,4 +3,4 @@ STMicroelectronics STM32 Peripheral Reset Controller The RCC IP is both a reset and a clock controller. -Please see Documentation/devicetree/bindings/clock/st,stm32-rcc.txt +Please see Documentation/devicetree/bindings/clock/st,stm32-rcc.yaml diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 8edc8261241a..acb5b9ba6f04 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -46,6 +46,7 @@ properties: - sifive,u7 - sifive,u74 - sifive,u74-mc + - spacemit,x60 - thead,c906 - thead,c908 - thead,c910 diff --git a/Documentation/devicetree/bindings/riscv/spacemit.yaml b/Documentation/devicetree/bindings/riscv/spacemit.yaml new file mode 100644 index 000000000000..52e55077af1a --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/spacemit.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/riscv/spacemit.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SpacemiT SoC-based boards + +maintainers: + - Yangyu Chen <cyy@cyyself.name> + - Yixun Lan <dlan@gentoo.org> + +description: + SpacemiT SoC-based boards + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - bananapi,bpi-f3 + - const: spacemit,k1 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index 692aa05500fd..0bde2379e864 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -111,7 +111,9 @@ properties: - mediatek,mt7623-btif - const: mediatek,mtk-btif - items: - - const: mrvl,mmp-uart + - enum: + - mrvl,mmp-uart + - spacemit,k1-uart - const: intel,xscale-uart - items: - enum: diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml index 88871480018e..ab39b95dae40 100644 --- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml +++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml @@ -23,6 +23,8 @@ properties: maxItems: 1 interrupts: + description: + When missing, device driver uses polling instead. maxItems: 1 clocks: @@ -76,7 +78,6 @@ properties: required: - compatible - reg - - interrupts allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index 51d9fb0f4763..8e82999e6acb 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -83,6 +83,11 @@ properties: - const: renesas,scif-r9a09g057 # RZ/V2H(P) + - items: + - enum: + - renesas,scif-r9a09g047 # RZ/G3E + - const: renesas,scif-r9a09g057 # RZ/V2H fallback + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/soc/altera/altr,sys-mgr.yaml b/Documentation/devicetree/bindings/soc/altera/altr,sys-mgr.yaml new file mode 100644 index 000000000000..d56ff4c05ae5 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/altera/altr,sys-mgr.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/altera/altr,sys-mgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera SOCFPGA System Manager + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +properties: + compatible: + oneOf: + - description: Cyclone5/Arria5/Arria10 + const: altr,sys-mgr + - description: Stratix10 SoC + items: + - const: altr,sys-mgr-s10 + - const: altr,sys-mgr + + reg: + maxItems: 1 + + cpu1-start-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU1 start address in hex + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: altr,sys-mgr-s10 + then: + properties: + cpu1-start-addr: false + +additionalProperties: false + +examples: + - | + sysmgr@ffd08000 { + compatible = "altr,sys-mgr"; + reg = <0xffd08000 0x1000>; + cpu1-start-addr = <0xffd080c4>; + }; diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml index c6bce40946d4..3dc66f1de023 100644 --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml @@ -13,6 +13,7 @@ properties: compatible: items: - enum: + - amlogic,meson-hhi-sysctrl - amlogic,meson-gx-hhi-sysctrl - amlogic,meson-gx-ao-sysctrl - amlogic,meson-axg-hhi-sysctrl @@ -40,6 +41,19 @@ allOf: properties: compatible: enum: + - amlogic,meson-hhi-sysctrl + then: + properties: + clock-controller: + $ref: /schemas/clock/amlogic,meson8-clkc.yaml# + + pinctrl: false + phy: false + + - if: + properties: + compatible: + enum: - amlogic,meson-gx-hhi-sysctrl - amlogic,meson-axg-hhi-sysctrl then: diff --git a/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt b/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt deleted file mode 100644 index 30942cf7992b..000000000000 --- a/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt +++ /dev/null @@ -1,47 +0,0 @@ -Raspberry Pi power domain driver - -Required properties: - -- compatible: Should be "raspberrypi,bcm2835-power". -- firmware: Reference to the RPi firmware device node. -- #power-domain-cells: Should be <1>, we providing multiple power domains. - -The valid defines for power domain are: - - RPI_POWER_DOMAIN_I2C0 - RPI_POWER_DOMAIN_I2C1 - RPI_POWER_DOMAIN_I2C2 - RPI_POWER_DOMAIN_VIDEO_SCALER - RPI_POWER_DOMAIN_VPU1 - RPI_POWER_DOMAIN_HDMI - RPI_POWER_DOMAIN_USB - RPI_POWER_DOMAIN_VEC - RPI_POWER_DOMAIN_JPEG - RPI_POWER_DOMAIN_H264 - RPI_POWER_DOMAIN_V3D - RPI_POWER_DOMAIN_ISP - RPI_POWER_DOMAIN_UNICAM0 - RPI_POWER_DOMAIN_UNICAM1 - RPI_POWER_DOMAIN_CCP2RX - RPI_POWER_DOMAIN_CSI2 - RPI_POWER_DOMAIN_CPI - RPI_POWER_DOMAIN_DSI0 - RPI_POWER_DOMAIN_DSI1 - RPI_POWER_DOMAIN_TRANSPOSER - RPI_POWER_DOMAIN_CCP2TX - RPI_POWER_DOMAIN_CDP - RPI_POWER_DOMAIN_ARM - -Example: - -power: power { - compatible = "raspberrypi,bcm2835-power"; - firmware = <&firmware>; - #power-domain-cells = <1>; -}; - -Example for using power domain: - -&usb { - power-domains = <&power RPI_POWER_DOMAIN_USB>; -}; diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml index 17016184143f..e459fec02ba8 100644 --- a/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml @@ -35,6 +35,7 @@ properties: fsl,liodn: $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 description: See pamu.txt. Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN (FLIODN) @@ -69,6 +70,7 @@ patternProperties: type: object properties: fsl,liodn: + $ref: /schemas/types.yaml#/definitions/uint32-array description: See pamu.txt, PAMU property used for static LIODN assignment fsl,iommu-parent: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index e63f800c6caa..41fbbe059d80 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -25,6 +25,7 @@ properties: compatible: items: - enum: + - qcom,qcs615-aoss-qmp - qcom,qcs8300-aoss-qmp - qcom,qdu1000-aoss-qmp - qcom,sa8255p-aoss-qmp diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml index b7acb65bdecd..225c0f07ae94 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -360,19 +360,21 @@ properties: - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000) - const: renesas,r8a779g0 - - description: R-Car V4H (R8A779G2) - items: - - enum: - - renesas,white-hawk-single # White Hawk Single board (RTP8A779G2ASKB0F10SA001) - - const: renesas,r8a779g2 - - const: renesas,r8a779g0 - - items: - enum: - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000) - const: renesas,white-hawk-cpu - const: renesas,r8a779g0 + - description: R-Car V4H (R8A779G[23]) + items: + - enum: + - renesas,white-hawk-single # White Hawk Single board (RTP8A779G[23]ASKB0F10SA001) + - enum: + - renesas,r8a779g2 # ES2.x + - renesas,r8a779g3 # ES3.x + - const: renesas,r8a779g0 + - description: R-Car V4M (R8A779H0) items: - enum: @@ -525,6 +527,23 @@ properties: - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0 - const: renesas,r9a09g011 + - description: RZ/G3E (R9A09G047) + items: + - enum: + - renesas,smarc2-evk # RZ SMARC Carrier-II EVK + - enum: + - renesas,rzg3e-smarcm # RZ/G3E SMARC Module (SoM) + - enum: + - renesas,r9a09g047e27 # Dual Cortex-A55 + Cortex-M33 (15mm BGA) + - renesas,r9a09g047e28 # Dual Cortex-A55 + Cortex-M33 (21mm BGA) + - renesas,r9a09g047e37 # Dual Cortex-A55 + Cortex-M33 + Ethos-U55 (15mm BGA) + - renesas,r9a09g047e38 # Dual Cortex-A55 + Cortex-M33 + Ethos-U55 (21mm BGA) + - renesas,r9a09g047e47 # Quad Cortex-A55 + Cortex-M33 (15mm BGA) + - renesas,r9a09g047e48 # Quad Cortex-A55 + Cortex-M33 (21mm BGA) + - renesas,r9a09g047e57 # Quad Cortex-A55 + Cortex-M33 + Ethos-U55 (15mm BGA) + - renesas,r9a09g047e58 # Quad Cortex-A55 + Cortex-M33 + Ethos-U55 (21mm BGA) + - const: renesas,r9a09g047 + - description: RZ/V2H(P) (R9A09G057) items: - enum: diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index 7eca9e1ad6a3..61f38b68a4a3 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -23,6 +23,7 @@ properties: - rockchip,rk3576-bigcore-grf - rockchip,rk3576-cci-grf - rockchip,rk3576-gpu-grf + - rockchip,rk3576-hdptxphy-grf - rockchip,rk3576-litcore-grf - rockchip,rk3576-npu-grf - rockchip,rk3576-php-grf diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml index 6cdfe7e059a3..8e6d051d8c97 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml @@ -55,6 +55,7 @@ properties: - samsung,exynos7885-pmu - samsung,exynos8895-pmu - samsung,exynos9810-pmu + - samsung,exynos990-pmu - samsung,exynosautov9-pmu - samsung,exynosautov920-pmu - tesla,fsd-pmu diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml index f80fcbc3128b..5b046932fbc3 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -64,6 +64,7 @@ properties: samsung,mode: $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] description: Selects USI function (which serial protocol to use). Refer to <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values. diff --git a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml index 3ca220582897..a75aef240629 100644 --- a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml @@ -21,6 +21,10 @@ properties: - samsung,exynos3-sysreg - samsung,exynos4-sysreg - samsung,exynos5-sysreg + - samsung,exynos8895-fsys0-sysreg + - samsung,exynos8895-fsys1-sysreg + - samsung,exynos8895-peric0-sysreg + - samsung,exynos8895-peric1-sysreg - samsung,exynosautov920-peric0-sysreg - samsung,exynosautov920-peric1-sysreg - tesla,fsd-cam-sysreg @@ -79,6 +83,10 @@ allOf: - samsung,exynos850-cmgp-sysreg - samsung,exynos850-peri-sysreg - samsung,exynos850-sysreg + - samsung,exynos8895-fsys0-sysreg + - samsung,exynos8895-fsys1-sysreg + - samsung,exynos8895-peric0-sysreg + - samsung,exynos8895-peric1-sysreg then: required: - clocks diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml index 3cb1471cc6b6..927b3200e29e 100644 --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -92,6 +92,16 @@ properties: description: | This property is as per sci-pm-domain.txt. + clocks: + items: + - description: ICSSG_CORE Clock + - description: ICSSG_IEP Clock + - description: ICSSG_RGMII_MHZ_250 Clock + - description: ICSSG_RGMII_MHZ_50 Clock + - description: ICSSG_RGMII_MHZ_5 Clock + - description: ICSSG_UART Clock + - description: ICSSG_ICLK Clock + patternProperties: memories@[a-f0-9]+$: diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt deleted file mode 100644 index 2417b13ba468..000000000000 --- a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt +++ /dev/null @@ -1,26 +0,0 @@ -LogicoreIP designed compatible with Xilinx ZYNQ family. -------------------------------------------------------- - -General concept ---------------- - -LogicoreIP design to provide the isolation between processing system -and programmable logic. Also provides the list of register set to configure -the frequency. - -Required properties: -- compatible: shall be one of: - "xlnx,vcu" - "xlnx,vcu-logicoreip-1.0" -- reg : The base offset and size of the VCU_PL_SLCR register space. -- clocks: phandle for aclk and pll_ref clocksource -- clock-names: The identification string, "aclk", is always required for - the axi clock. "pll_ref" is required for pll. -Example: - - xlnx_vcu: vcu@a0040000 { - compatible = "xlnx,vcu-logicoreip-1.0"; - reg = <0x0 0xa0040000 0x0 0x1000>; - clocks = <&si570_1>, <&clkc 71>; - clock-names = "pll_ref", "aclk"; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml index f3f32540779c..f1beae84cad1 100644 --- a/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml +++ b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml @@ -36,12 +36,14 @@ unevaluatedProperties: false examples: - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@34 { - compatible = "adi,ssm2518"; - reg = <0x34>; - gpios = <&gpio 5 0>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@34 { + compatible = "adi,ssm2518"; + reg = <0x34>; + gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml index ebc9097f936a..ccae64ce3071 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -23,6 +23,7 @@ properties: - allwinner,sun8i-h3-codec - allwinner,sun8i-v3s-codec - allwinner,sun50i-h616-codec + - allwinner,suniv-f1c100s-codec reg: maxItems: 1 @@ -77,6 +78,7 @@ properties: - MIC1 - MIC2 - MIC3 + - MIC # Microphone Biases from the SoC - HBIAS @@ -87,6 +89,8 @@ properties: - Headset Mic - Line In - Line Out + - Right FM In + - Left FM In - Mic - Speaker @@ -270,6 +274,33 @@ allOf: - const: rx - const: tx + - if: + properties: + compatible: + enum: + - allwinner,suniv-f1c100s-codec + + then: + properties: + allwinner,audio-routing: + items: + enum: + - HP + - HPCOM + - LINEIN + - LINEOUT + - MIC + - HBIAS + - MBIAS + - Headphone + - Headset Mic + - Line In + - Line Out + - Right FM In + - Left FM In + - Mic + - Speaker + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml index 3b0b743e49c4..6676406bf2de 100644 --- a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml +++ b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml @@ -18,6 +18,7 @@ properties: compatible: enum: - awinic,aw88081 + - awinic,aw88083 - awinic,aw88261 - awinic,aw88395 - awinic,aw88399 @@ -58,6 +59,7 @@ allOf: contains: enum: - awinic,aw88081 + - awinic,aw88083 - awinic,aw88261 then: properties: diff --git a/Documentation/devicetree/bindings/sound/everest,es71x4.yaml b/Documentation/devicetree/bindings/sound/everest,es71x4.yaml index fd1b32812228..efe9f3fd3778 100644 --- a/Documentation/devicetree/bindings/sound/everest,es71x4.yaml +++ b/Documentation/devicetree/bindings/sound/everest,es71x4.yaml @@ -53,10 +53,10 @@ unevaluatedProperties: false examples: - | - codec { - compatible = "everest,es7134"; - #sound-dai-cells = <0>; - VDD-supply = <&vdd_supply>; - }; + codec { + compatible = "everest,es7134"; + #sound-dai-cells = <0>; + VDD-supply = <&vdd_supply>; + }; ... diff --git a/Documentation/devicetree/bindings/sound/everest,es7241.yaml b/Documentation/devicetree/bindings/sound/everest,es7241.yaml index f179af758730..e5cfb40f1ef2 100644 --- a/Documentation/devicetree/bindings/sound/everest,es7241.yaml +++ b/Documentation/devicetree/bindings/sound/everest,es7241.yaml @@ -54,14 +54,15 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - codec { - compatible = "everest,es7241"; - #sound-dai-cells = <0>; - reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - VDDP-supply = <&vddp_supply>; - VDDA-supply = <&vdda_supply>; - VDDD-supply = <&vddd_supply>; - }; + #include <dt-bindings/gpio/gpio.h> + + codec { + compatible = "everest,es7241"; + #sound-dai-cells = <0>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + VDDP-supply = <&vddp_supply>; + VDDA-supply = <&vdda_supply>; + VDDD-supply = <&vddd_supply>; + }; ... diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml index 0782f3f9947f..c454110f4281 100644 --- a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml @@ -87,20 +87,20 @@ examples: #include <dt-bindings/clock/imx8mn-clock.h> easrc: easrc@300c0000 { - compatible = "fsl,imx8mn-easrc"; - reg = <0x300c0000 0x10000>; - interrupts = <0x0 122 0x4>; - clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; - clock-names = "mem"; - dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, - <&sdma2 18 23 0> , <&sdma2 19 23 0>, - <&sdma2 20 23 0> , <&sdma2 21 23 0>, - <&sdma2 22 23 0> , <&sdma2 23 23 0>; - dma-names = "ctx0_rx", "ctx0_tx", - "ctx1_rx", "ctx1_tx", - "ctx2_rx", "ctx2_tx", - "ctx3_rx", "ctx3_tx"; - firmware-name = "imx/easrc/easrc-imx8mn.bin"; - fsl,asrc-rate = <8000>; - fsl,asrc-format = <2>; + compatible = "fsl,imx8mn-easrc"; + reg = <0x300c0000 0x10000>; + interrupts = <0x0 122 0x4>; + clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; + clock-names = "mem"; + dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, + <&sdma2 18 23 0> , <&sdma2 19 23 0>, + <&sdma2 20 23 0> , <&sdma2 21 23 0>, + <&sdma2 22 23 0> , <&sdma2 23 23 0>; + dma-names = "ctx0_rx", "ctx0_tx", + "ctx1_rx", "ctx1_tx", + "ctx2_rx", "ctx2_tx", + "ctx3_rx", "ctx3_tx"; + firmware-name = "imx/easrc/easrc-imx8mn.bin"; + fsl,asrc-rate = <8000>; + fsl,asrc-format = <2>; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml index c1e9803fc113..c47b7a097490 100644 --- a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml @@ -25,6 +25,7 @@ properties: - fsl,imx8mm-micfil - fsl,imx8mp-micfil - fsl,imx93-micfil + - fsl,imx943-micfil reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.yaml b/Documentation/devicetree/bindings/sound/fsl,mqs.yaml index 030ccc173130..8c22e8348b14 100644 --- a/Documentation/devicetree/bindings/sound/fsl,mqs.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,mqs.yaml @@ -23,6 +23,8 @@ properties: - fsl,imx8qm-mqs - fsl,imx8qxp-mqs - fsl,imx93-mqs + - fsl,imx943-aonmix-mqs + - fsl,imx943-wakeupmix-mqs - fsl,imx95-aonmix-mqs - fsl,imx95-netcmix-mqs diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml index 5e2801014221..f68d0e0ecfe5 100644 --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml @@ -140,21 +140,21 @@ examples: #include <dt-bindings/reset/imx8mp-reset.h> xcvr: xcvr@30cc0000 { - compatible = "fsl,imx8mp-xcvr"; - reg = <0x30cc0000 0x800>, - <0x30cc0800 0x400>, - <0x30cc0c00 0x080>, - <0x30cc0e00 0x080>; - reg-names = "ram", "regs", "rxfifo", "txfifo"; - interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_IPG>, - <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_PHY>, - <&audiomix_clk IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>, - <&audiomix_clk IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>; - clock-names = "ipg", "phy", "spba", "pll_ipg"; - dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>; - dma-names = "rx", "tx"; - resets = <&audiomix_reset 0>; + compatible = "fsl,imx8mp-xcvr"; + reg = <0x30cc0000 0x800>, + <0x30cc0800 0x400>, + <0x30cc0c00 0x080>, + <0x30cc0e00 0x080>; + reg-names = "ram", "regs", "rxfifo", "txfifo"; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_IPG>, + <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_PHY>, + <&audiomix_clk IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>, + <&audiomix_clk IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>; + clock-names = "ipg", "phy", "spba", "pll_ipg"; + dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>; + dma-names = "rx", "tx"; + resets = <&audiomix_reset 0>; }; diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml index 76b6f2cf25df..dca617860938 100644 --- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml @@ -72,19 +72,19 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/interrupt-controller/irq.h> - #define KEEM_BAY_PSS_AUX_I2S3 - #define KEEM_BAY_PSS_I2S3 - i2s3: i2s@20140000 { - compatible = "intel,keembay-i2s"; - #sound-dai-cells = <0>; - reg = <0x20140000 0x200>, /* I2S registers */ - <0x202a00a4 0x4>; /* I2S gen configuration */ - reg-names = "i2s-regs", "i2s_gen_cfg"; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "osc", "apb_clk"; - clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>; - dmas = <&axi_dma0 29>, <&axi_dma0 33>; - dma-names = "tx", "rx"; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #define KEEM_BAY_PSS_AUX_I2S3 + #define KEEM_BAY_PSS_I2S3 + i2s@20140000 { + compatible = "intel,keembay-i2s"; + #sound-dai-cells = <0>; + reg = <0x20140000 0x200>, /* I2S registers */ + <0x202a00a4 0x4>; /* I2S gen configuration */ + reg-names = "i2s-regs", "i2s_gen_cfg"; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "osc", "apb_clk"; + clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>; + dmas = <&axi_dma0 29>, <&axi_dma0 33>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml index ba482747f0e6..362e729b51b4 100644 --- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml @@ -14,11 +14,15 @@ allOf: properties: compatible: - enum: - - mediatek,mt8188-es8326 - - mediatek,mt8188-mt6359-evb - - mediatek,mt8188-nau8825 - - mediatek,mt8188-rt5682s + oneOf: + - enum: + - mediatek,mt8188-es8326 + - mediatek,mt8188-mt6359-evb + - mediatek,mt8188-nau8825 + - mediatek,mt8188-rt5682s + - items: + - const: mediatek,mt8390-mt6359-evk + - const: mediatek,mt8188-mt6359-evb audio-routing: description: @@ -56,6 +60,8 @@ patternProperties: - ETDM2_OUT_BE - ETDM3_OUT_BE - PCM1_BE + - DL_SRC_BE + - UL_SRC_BE codec: description: Holds subnode which indicates codec dai. diff --git a/Documentation/devicetree/bindings/sound/neofidelity,ntp8918.yaml b/Documentation/devicetree/bindings/sound/neofidelity,ntp8918.yaml index 952768b35902..6946177e391a 100644 --- a/Documentation/devicetree/bindings/sound/neofidelity,ntp8918.yaml +++ b/Documentation/devicetree/bindings/sound/neofidelity,ntp8918.yaml @@ -55,16 +55,18 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - i2c { - #address-cells = <1>; - #size-cells = <0>; - audio-codec@2a { - compatible = "neofidelity,ntp8918"; - #sound-dai-cells = <0>; - reg = <0x2a>; - clocks = <&clkc 150>, <&clkc 151>, <&clkc 152>; - clock-names = "wck", "scl", "bck"; - reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@2a { + compatible = "neofidelity,ntp8918"; + #sound-dai-cells = <0>; + reg = <0x2a>; + clocks = <&clkc 150>, <&clkc 151>, <&clkc 152>; + clock-names = "wck", "scl", "bck"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; }; - }; diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml index 13f09f1bc800..0a698798c22b 100644 --- a/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml +++ b/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml @@ -51,7 +51,7 @@ properties: description: Power supply for AVDD, providing 1.8V. cpvdd-supply: - description: Power supply for CPVDD, providing 3.5V. + description: Power supply for CPVDD, providing 1.8V. hp-detect-gpios: description: diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5682.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5682.yaml new file mode 100644 index 000000000000..39333ea05646 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/realtek,rt5682.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt5682.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek rt5682 and rt5682i codecs + +maintainers: + - Bard Liao <bardliao@realtek.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - realtek,rt5682 + - realtek,rt5682i + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + maxItems: 1 + description: The CODEC's interrupt output. + + realtek,dmic1-data-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # dmic1 data is not used + - 1 # using GPIO2 pin as dmic1 data pin + - 2 # using GPIO5 pin as dmic1 data pin + description: + Specify which GPIO pin be used as DMIC1 data pin. + + realtek,dmic1-clk-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # using GPIO1 pin as dmic1 clock pin + - 1 # using GPIO3 pin as dmic1 clock pin + description: + Specify which GPIO pin be used as DMIC1 clk pin. + + realtek,jd-src: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # No JD is used + - 1 # using JD1 as JD source + description: + Specify which JD source be used. + + realtek,ldo1-en-gpios: + description: + The GPIO that controls the CODEC's LDO1_EN pin. + + realtek,btndet-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The debounce delay for push button. + The delay time is realtek,btndet-delay value multiple of 8.192 ms. + If absent, the default is 16. + + realtek,dmic-clk-rate-hz: + description: + Set the clock rate (hz) for the requirement of the particular DMIC. + + realtek,dmic-delay-ms: + description: + Set the delay time (ms) for the requirement of the particular DMIC. + + realtek,dmic-clk-driving-high: + type: boolean + description: + Set the high driving of the DMIC clock out. + + clocks: + items: + - description: phandle and clock specifier for codec MCLK. + + clock-names: + items: + - const: mclk + + "#clock-cells": + const: 1 + + clock-output-names: + minItems: 2 + maxItems: 2 + description: Name given for DAI word clock and bit clock outputs. + + "#sound-dai-cells": + const: 1 + + AVDD-supply: + description: Regulator supplying analog power through the AVDD pin. + + MICVDD-supply: + description: Regulator supplying power for the microphone bias through + the MICVDD pin. + + VBAT-supply: + description: Regulator supplying battery power through the VBAT pin. + + DBVDD-supply: + description: Regulator supplying I/O power through the DBVDD pin. + + LDO1-IN-supply: + description: Regulator supplying power to the digital core and charge + pump through the LDO1_IN pin. + +required: + - compatible + - reg + - AVDD-supply + - VBAT-supply + - MICVDD-supply + - DBVDD-supply + - LDO1-IN-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "realtek,rt5682"; + reg = <0x1a>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + realtek,ldo1-en-gpios = + <&gpio 2 GPIO_ACTIVE_HIGH>; + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; + + #clock-cells = <1>; + clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk"; + + clocks = <&osc>; + clock-names = "mclk"; + + AVDD-supply = <&avdd_reg>; + VBAT-supply = <&vbat_reg>; + MICVDD-supply = <&micvdd_reg>; + DBVDD-supply = <&dbvdd_reg>; + LDO1-IN-supply = <&ldo1_in_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index 6d0d1514cd42..e8a2acb92646 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -112,12 +112,6 @@ properties: description: List of necessary clock names. # details are defined below - post-init-providers: - description: At least if rsnd is using DPCM connection on Audio-Graph-Card2, - fw_devlink might doesn't have enough information to break the cycle. rsnd - driver will not be probed in such case. Same problem might occur with - Multi-CPU/Codec or Codec2Codec. - # ports is below port: $ref: audio-graph-port.yaml#/definitions/port-base diff --git a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml index f4610eaed1e1..e4cdbf2202b9 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml @@ -19,6 +19,7 @@ properties: - renesas,r9a07g043-ssi # RZ/G2UL and RZ/Five - renesas,r9a07g044-ssi # RZ/G2{L,LC} - renesas,r9a07g054-ssi # RZ/V2L + - renesas,r9a08g045-ssi # RZ/G3S - const: renesas,rz-ssi reg: @@ -57,24 +58,6 @@ properties: dmas: minItems: 1 maxItems: 2 - description: - The first cell represents a phandle to dmac. - The second cell specifies the encoded MID/RID values of the SSI port - connected to the DMA client and the slave channel configuration - parameters. - bits[0:9] - Specifies MID/RID value of a SSI channel as below - MID/RID value of SSI rx0 = 0x256 - MID/RID value of SSI tx0 = 0x255 - MID/RID value of SSI rx1 = 0x25a - MID/RID value of SSI tx1 = 0x259 - MID/RID value of SSI rt2 = 0x25f - MID/RID value of SSI rx3 = 0x262 - MID/RID value of SSI tx3 = 0x261 - bit[10] - HIEN = 1, Detects a request in response to the rising edge - of the signal - bit[11] - LVL = 0, Detects based on the edge - bits[12:14] - AM = 2, Bus cycle mode - bit[15] - TM = 0, Single transfer mode dma-names: oneOf: diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt deleted file mode 100644 index 5e1d08de18a5..000000000000 --- a/Documentation/devicetree/bindings/sound/rt5682.txt +++ /dev/null @@ -1,98 +0,0 @@ -RT5682 audio CODEC - -This device supports I2C only. - -Required properties: - -- compatible : "realtek,rt5682" or "realtek,rt5682i" - -- reg : The I2C address of the device. - -- AVDD-supply: phandle to the regulator supplying analog power through the - AVDD pin - -- MICVDD-supply: phandle to the regulator supplying power for the microphone - bias through the MICVDD pin. Either MICVDD or VBAT should be present. - -- VBAT-supply: phandle to the regulator supplying battery power through the - VBAT pin. Either MICVDD or VBAT should be present. - -- DBVDD-supply: phandle to the regulator supplying I/O power through the DBVDD - pin. - -- LDO1-IN-supply: phandle to the regulator supplying power to the digital core - and charge pump through the LDO1_IN pin. - -Optional properties: - -- interrupts : The CODEC's interrupt output. - -- realtek,dmic1-data-pin - 0: dmic1 is not used - 1: using GPIO2 pin as dmic1 data pin - 2: using GPIO5 pin as dmic1 data pin - -- realtek,dmic1-clk-pin - 0: using GPIO1 pin as dmic1 clock pin - 1: using GPIO3 pin as dmic1 clock pin - -- realtek,jd-src - 0: No JD is used - 1: using JD1 as JD source - -- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. - -- realtek,btndet-delay - The debounce delay for push button. - The delay time is realtek,btndet-delay value multiple of 8.192 ms. - If absent, the default is 16. - -- #clock-cells : Should be set to '<1>', wclk and bclk sources provided. -- clock-output-names : Name given for DAI clocks output. - -- clocks : phandle and clock specifier for codec MCLK. -- clock-names : Clock name string for 'clocks' attribute, should be "mclk". - -- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of - the particular DMIC. - -- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of - the particular DMIC. - -- realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out. - -- #sound-dai-cells: Should be set to '<1>'. - -Pins on the device (for linking into audio routes) for RT5682: - - * DMIC L1 - * DMIC R1 - * IN1P - * HPOL - * HPOR - -Example: - -rt5682 { - compatible = "realtek,rt5682i"; - reg = <0x1a>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>; - realtek,ldo1-en-gpios = - <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; - realtek,dmic1-data-pin = <1>; - realtek,dmic1-clk-pin = <1>; - realtek,jd-src = <1>; - realtek,btndet-delay = <16>; - - #clock-cells = <1>; - clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk"; - - clocks = <&osc>; - clock-names = "mclk"; - - AVDD-supply = <&avdd_reg>; - MICVDD-supply = <&micvdd_reg>; - DBVDD-supply = <&dbvdd_reg>; - LDO1-IN-supply = <&ldo1_in_reg>; -}; diff --git a/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml b/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml index dd5b08e3d7a1..d89b4255b51c 100644 --- a/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml +++ b/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml @@ -159,19 +159,21 @@ additionalProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - i2c { - /* example for two devices with interrupt support */ - #address-cells = <1>; - #size-cells = <0>; - pcm6240: audio-codec@48 { - compatible = "ti,pcm6240"; - reg = <0x48>, /* primary-device */ - <0x4b>; /* secondary-device */ - #sound-dai-cells = <0>; - reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - interrupt-parent = <&gpio1>; - interrupts = <15>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + /* example for two devices with interrupt support */ + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@48 { + compatible = "ti,pcm6240"; + reg = <0x48>, /* primary-device */ + <0x4b>; /* secondary-device */ + #sound-dai-cells = <0>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio1>; + interrupts = <15>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/sound/ti,tas2562.yaml b/Documentation/devicetree/bindings/sound/ti,tas2562.yaml index 8bc3b0c7531e..3763ca16b91f 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2562.yaml @@ -65,17 +65,19 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec: codec@4c { - compatible = "ti,tas2562"; - reg = <0x4c>; - #sound-dai-cells = <0>; - interrupt-parent = <&gpio1>; - interrupts = <14>; - shutdown-gpios = <&gpio1 15 0>; - ti,imon-slot-no = <0>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@4c { + compatible = "ti,tas2562"; + reg = <0x4c>; + #sound-dai-cells = <0>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + shutdown-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + ti,imon-slot-no = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/ti,tas2770.yaml b/Documentation/devicetree/bindings/sound/ti,tas2770.yaml index 362c2e6154f0..5e7aea43aced 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2770.yaml @@ -69,19 +69,21 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec: codec@41 { - compatible = "ti,tas2770"; - reg = <0x41>; - #sound-dai-cells = <0>; - interrupt-parent = <&gpio1>; - interrupts = <14>; - reset-gpio = <&gpio1 15 0>; - shutdown-gpios = <&gpio1 14 0>; - ti,imon-slot-no = <0>; - ti,vmon-slot-no = <2>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@41 { + compatible = "ti,tas2770"; + reg = <0x41>; + #sound-dai-cells = <0>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + reset-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml index 976238689249..5ea1cdc593b5 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -101,22 +101,24 @@ additionalProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - i2c { - /* example with quad tas2781s, such as tablet or pad device */ - #address-cells = <1>; - #size-cells = <0>; - quad_tas2781: tas2781@38 { - compatible = "ti,tas2781"; - reg = <0x38>, /* Audio slot 0 */ - <0x3a>, /* Audio slot 1 */ - <0x39>, /* Audio slot 2 */ - <0x3b>; /* Audio slot 3 */ - - #sound-dai-cells = <0>; - reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - interrupt-parent = <&gpio1>; - interrupts = <15>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + /* example with quad tas2781s, such as tablet or pad device */ + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@38 { + compatible = "ti,tas2781"; + reg = <0x38>, /* Audio slot 0 */ + <0x3a>, /* Audio slot 1 */ + <0x39>, /* Audio slot 2 */ + <0x3b>; /* Audio slot 3 */ + + #sound-dai-cells = <0>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio1>; + interrupts = <15>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml b/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml index 530bc3937847..5447482179c1 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml @@ -62,21 +62,23 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec: codec@38 { - compatible = "ti,tas2764"; - reg = <0x38>; - #sound-dai-cells = <0>; - interrupt-parent = <&gpio1>; - interrupts = <14>; - reset-gpios = <&gpio1 15 0>; - shutdown-gpios = <&gpio1 15 0>; - ti,imon-slot-no = <0>; - ti,vmon-slot-no = <2>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@38 { + compatible = "ti,tas2764"; + reg = <0x38>; + #sound-dai-cells = <0>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml b/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml index 2f917238db95..74f7d02b424b 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml @@ -112,22 +112,24 @@ unevaluatedProperties: false examples: - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@2a { - compatible = "ti,tas5717"; - reg = <0x2a>; - #sound-dai-cells = <0>; - reset-gpios = <&gpio1 15 0>; - pdn-gpios = <&gpio1 15 0>; - AVDD-supply = <&avdd_supply>; - DVDD-supply = <&dvdd_supply>; - HPVDD-supply = <&hpvdd_supply>; - PVDD_AB-supply = <&pvdd_ab_supply>; - PVDD_CD-supply = <&pvdd_cd_supply>; - }; - }; + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@2a { + compatible = "ti,tas5717"; + reg = <0x2a>; + #sound-dai-cells = <0>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + pdn-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + AVDD-supply = <&avdd_supply>; + DVDD-supply = <&dvdd_supply>; + HPVDD-supply = <&hpvdd_supply>; + PVDD_AB-supply = <&pvdd_ab_supply>; + PVDD_CD-supply = <&pvdd_cd_supply>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml index d48ecd6cd5ad..b6bc71d19286 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml @@ -68,6 +68,7 @@ properties: - items: - enum: - amd,pensando-elba-qspi + - amd,versal2-ospi - intel,lgm-qspi - intel,socfpga-qspi - mobileye,eyeq5-ospi diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 093150c0cb87..82d051f7bd6e 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -69,6 +69,11 @@ properties: Should be generally avoided and be replaced by spi-cs-high + ACTIVE_HIGH. + The simplest way to obtain an active-high CS signal is to configure the + controller's cs-gpio property with the ACTIVE_HIGH flag and set the + peripheral's spi-cs-high property. See example below for a better + understanding. + fifo-depth: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -189,3 +194,23 @@ examples: stacked-memories = /bits/ 64 <0x10000000 0x10000000>; }; }; + + - | + #include <dt-bindings/gpio/gpio.h> + + spi@20204000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204000 0x1000>; + interrupts = <2 22>; + clocks = <&clk_spi>; + cs-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + + display@0 { + compatible = "lg,lg4573"; + spi-max-frequency = <1000000>; + reg = <0>; + spi-cs-high; + }; + }; diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml index d9322704f358..a7236f7db4ec 100644 --- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml @@ -47,7 +47,9 @@ properties: - const: allwinner,sun8i-v3s-system-control - const: allwinner,sun8i-h3-system-control - items: - - const: allwinner,sun50i-h6-system-control + - enum: + - allwinner,sun50i-a100-system-control + - allwinner,sun50i-h6-system-control - const: allwinner,sun50i-a64-system-control reg: diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml index 9b06bcd01957..2711f90d9664 100644 --- a/Documentation/devicetree/bindings/sram/qcom,imem.yaml +++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml @@ -20,6 +20,7 @@ properties: - qcom,apq8064-imem - qcom,msm8226-imem - qcom,msm8974-imem + - qcom,msm8976-imem - qcom,qcs404-imem - qcom,qcs8300-imem - qcom,qdu1000-imem diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index ed5de0f92a9e..b9829bb22cc0 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -80,6 +80,7 @@ properties: - description: v2 of TSENS with combined interrupt items: - enum: + - qcom,ipq6018-tsens - qcom,ipq9574-tsens - const: qcom,ipq8074-tsens diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml index e2607377cbae..9898dc7ea97b 100644 --- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml +++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml @@ -21,6 +21,7 @@ properties: - items: - enum: - fsl,imx25-gpt + - fsl,imx35-gpt - fsl,imx50-gpt - fsl,imx51-gpt - fsl,imx53-gpt @@ -31,6 +32,7 @@ properties: - enum: - fsl,imx6sl-gpt - fsl,imx6sx-gpt + - fsl,imx7d-gpt - fsl,imx8mp-gpt - fsl,imxrt1050-gpt - fsl,imxrt1170-gpt @@ -38,7 +40,6 @@ properties: - items: - enum: - fsl,imx6ul-gpt - - fsl,imx7d-gpt - const: fsl,imx6sx-gpt reg: diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml index b42d43d2de48..76d83aea4e2b 100644 --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -31,6 +31,7 @@ properties: - enum: - canaan,k210-clint # Canaan Kendryte K210 - sifive,fu540-c000-clint # SiFive FU540 + - spacemit,k1-clint # SpacemiT K1 - starfive,jh7100-clint # StarFive JH7100 - starfive,jh7110-clint # StarFive JH7110 - starfive,jh8100-clint # StarFive JH8100 diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 88abb5c174f3..fadbd3c041c8 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -55,8 +55,6 @@ properties: - atmel,atsha204a # BPA-RS600: Power Supply - blutek,bpa-rs600 - # Bosch Sensortec pressure, temperature, humididty and VOC sensor - - bosch,bme680 # CM32181: Ambient Light Sensor - capella,cm32181 # CM3232: Ambient Light Sensor @@ -147,8 +145,12 @@ properties: - injoinic,ip5207 # Injoinic IP5209 2.4A Power Bank IC with I2C - injoinic,ip5209 + # Injoinic IP5306 2.1A Power Bank IC with I2C option + - injoinic,ip5306 # Inspur Power System power supply unit version 1 - inspur,ipsps1 + # Intel common redudant power supply crps185 + - intel,crps185 # Intersil ISL29028 Ambient Light and Proximity Sensor - isil,isl29028 # Intersil ISL29030 Ambient Light and Proximity Sensor diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml index cde334e3206b..a03fff5df5ef 100644 --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml @@ -26,6 +26,7 @@ properties: - qcom,msm8994-ufshc - qcom,msm8996-ufshc - qcom,msm8998-ufshc + - qcom,qcs615-ufshc - qcom,qcs8300-ufshc - qcom,sa8775p-ufshc - qcom,sc7180-ufshc @@ -243,6 +244,7 @@ allOf: compatible: contains: enum: + - qcom,qcs615-ufshc - qcom,sm6115-ufshc - qcom,sm6125-ufshc then: diff --git a/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml b/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml index f04f9f61fa9f..1949a15e73d2 100644 --- a/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml @@ -50,12 +50,12 @@ examples: #include <dt-bindings/power/r8a779f0-sysc.h> ufs: ufs@e686000 { - compatible = "renesas,r8a779f0-ufs"; - reg = <0xe6860000 0x100>; - interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>; - clock-names = "fck", "ref_clk"; - freq-table-hz = <200000000 200000000>, <38400000 38400000>; - power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; - resets = <&cpg 1514>; + compatible = "renesas,r8a779f0-ufs"; + reg = <0xe6860000 0x100>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>; + clock-names = "fck", "ref_clk"; + freq-table-hz = <200000000 200000000>, <38400000 38400000>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 1514>; }; diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml index 720879820f66..b4e744ebffd1 100644 --- a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml @@ -112,19 +112,19 @@ examples: #include <dt-bindings/clock/exynos7-clk.h> ufs: ufs@15570000 { - compatible = "samsung,exynos7-ufs"; - reg = <0x15570000 0x100>, - <0x15570100 0x100>, - <0x15571000 0x200>, - <0x15572000 0x300>; - reg-names = "hci", "vs_hci", "unipro", "ufsp"; - interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock_fsys1 ACLK_UFS20_LINK>, - <&clock_fsys1 SCLK_UFSUNIPRO20_USER>; - clock-names = "core_clk", "sclk_unipro_main"; - pinctrl-names = "default"; - pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; - phys = <&ufs_phy>; - phy-names = "ufs-phy"; + compatible = "samsung,exynos7-ufs"; + reg = <0x15570000 0x100>, + <0x15570100 0x100>, + <0x15571000 0x200>, + <0x15572000 0x300>; + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_fsys1 ACLK_UFS20_LINK>, + <&clock_fsys1 SCLK_UFSUNIPRO20_USER>; + clock-names = "core_clk", "sclk_unipro_main"; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; + phys = <&ufs_phy>; + phy-names = "ufs-phy"; }; ... diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml index a86bcd95100e..7f22f9c031b2 100644 --- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -113,27 +113,27 @@ examples: - | #include <dt-bindings/clock/aspeed-clock.h> vhub: usb-vhub@1e6a0000 { - compatible = "aspeed,ast2500-usb-vhub"; - reg = <0x1e6a0000 0x300>; - interrupts = <5>; - clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; - aspeed,vhub-downstream-ports = <5>; - aspeed,vhub-generic-endpoints = <15>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2ad_default>; - - vhub-vendor-id = <0x1d6b>; - vhub-product-id = <0x0107>; - vhub-device-revision = <0x0100>; - vhub-strings { - #address-cells = <1>; - #size-cells = <0>; - - string@409 { - reg = <0x409>; - manufacturer = "ASPEED"; - product = "USB Virtual Hub"; - serial-number = "0000"; - }; + compatible = "aspeed,ast2500-usb-vhub"; + reg = <0x1e6a0000 0x300>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + + vhub-vendor-id = <0x1d6b>; + vhub-product-id = <0x0107>; + vhub-device-revision = <0x0100>; + vhub-strings { + #address-cells = <1>; + #size-cells = <0>; + + string@409 { + reg = <0x409>; + manufacturer = "ASPEED"; + product = "USB Virtual Hub"; + serial-number = "0000"; }; + }; }; diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.yaml b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml index 9e561fee98f1..f9375c69e86b 100644 --- a/Documentation/devicetree/bindings/usb/brcm,bdc.yaml +++ b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml @@ -41,10 +41,10 @@ additionalProperties: false examples: - | - usb@f0b02000 { - compatible = "brcm,bdc-udc-v2"; - reg = <0xf0b02000 0xfc4>; - interrupts = <0x0 0x60 0x0>; - phys = <&usbphy_0 0x0>; - clocks = <&sw_usbd>; - }; + usb@f0b02000 { + compatible = "brcm,bdc-udc-v2"; + reg = <0xf0b02000 0xfc4>; + interrupts = <0x0 0x60 0x0>; + phys = <&usbphy_0 0x0>; + clocks = <&sw_usbd>; + }; diff --git a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml index e44e88d993d0..1033b7a4b8f9 100644 --- a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml +++ b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml @@ -56,21 +56,21 @@ examples: /* 2.0 hub on port 1 */ hub_2_0: hub@1 { - compatible = "usb4b4,6504"; - reg = <1>; - peer-hub = <&hub_3_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - vdd-supply = <®_1v2_usb>; - vdd2-supply = <®_3v3_usb>; + compatible = "usb4b4,6504"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_1v2_usb>; + vdd2-supply = <®_3v3_usb>; }; /* 3.0 hub on port 2 */ hub_3_0: hub@2 { - compatible = "usb4b4,6506"; - reg = <2>; - peer-hub = <&hub_2_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - vdd-supply = <®_1v2_usb>; - vdd2-supply = <®_3v3_usb>; + compatible = "usb4b4,6506"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_1v2_usb>; + vdd2-supply = <®_3v3_usb>; }; }; diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index a5f2e3442a0e..e83d30a91b88 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -192,7 +192,7 @@ unevaluatedProperties: false examples: - | - usb@101c0000 { + usb@101c0000 { compatible = "rockchip,rk3066-usb", "snps,dwc2"; reg = <0x10180000 0x40000>; interrupts = <18>; @@ -200,6 +200,6 @@ examples: clock-names = "otg"; phys = <&usbphy>; phy-names = "usb2-phy"; - }; + }; ... diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml index 8b25b9a01ced..e3a7df91f7f1 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml @@ -87,21 +87,21 @@ examples: #size-cells = <0>; typec-mux@42 { - compatible = "fcs,fsa4480"; - reg = <0x42>; + compatible = "fcs,fsa4480"; + reg = <0x42>; - interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; - vcc-supply = <&vreg_bob>; + vcc-supply = <&vreg_bob>; - mode-switch; - orientation-switch; + mode-switch; + orientation-switch; - port { - fsa4480_ept: endpoint { - remote-endpoint = <&typec_controller>; + port { + fsa4480_ept: endpoint { + remote-endpoint = <&typec_controller>; + }; }; - }; }; }; ... diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml index 8a5f837eff94..e588514fab2d 100644 --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml @@ -20,6 +20,7 @@ properties: items: - enum: - nxp,cbdtu02043 + - onnn,fsusb42 - onnn,fsusb43l10x - pericom,pi3usb102 - ti,tmuxhs4212 diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml index d3511f48cd55..1a75544a8c31 100644 --- a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml @@ -58,20 +58,20 @@ examples: #define KEEM_BAY_A53_AUX_USB_SUSPEND usb { - compatible = "intel,keembay-dwc3"; - clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>, - <&scmi_clk KEEM_BAY_A53_AUX_USB_REF>, - <&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>, - <&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>; - clock-names = "async_master", "ref", "alt_ref", "suspend"; - ranges; - #address-cells = <1>; - #size-cells = <1>; - - usb@34000000 { - compatible = "snps,dwc3"; - reg = <0x34000000 0x10000>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "peripheral"; - }; + compatible = "intel,keembay-dwc3"; + clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_REF>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>; + clock-names = "async_master", "ref", "alt_ref", "suspend"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + usb@34000000 { + compatible = "snps,dwc3"; + reg = <0x34000000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "peripheral"; + }; }; diff --git a/Documentation/devicetree/bindings/usb/ite,it5205.yaml b/Documentation/devicetree/bindings/usb/ite,it5205.yaml index 36ec4251b5f2..889710733de5 100644 --- a/Documentation/devicetree/bindings/usb/ite,it5205.yaml +++ b/Documentation/devicetree/bindings/usb/ite,it5205.yaml @@ -54,19 +54,19 @@ examples: #size-cells = <0>; typec-mux@48 { - compatible = "ite,it5205"; - reg = <0x48>; + compatible = "ite,it5205"; + reg = <0x48>; - mode-switch; - orientation-switch; + mode-switch; + orientation-switch; - vcc-supply = <&mt6359_vibr_ldo_reg>; + vcc-supply = <&mt6359_vibr_ldo_reg>; - port { - it5205_usbss_sbu: endpoint { - remote-endpoint = <&typec_controller>; + port { + it5205_usbss_sbu: endpoint { + remote-endpoint = <&typec_controller>; + }; }; - }; }; }; ... diff --git a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml index 20b62228371b..3de4dc40b791 100644 --- a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml +++ b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml @@ -13,8 +13,12 @@ description: Maxim TCPCI Type-C PD controller properties: compatible: - enum: - - maxim,max33359 + oneOf: + - enum: + - maxim,max33359 + - items: + - const: maxim,max77759-tcpci + - const: maxim,max33359 reg: maxItems: 1 @@ -70,6 +74,7 @@ examples: PDO_FIXED_DUAL_ROLE) PDO_FIXED(9000, 2000, 0)>; sink-bc12-completion-time-ms = <500>; + pd-revision = /bits/ 8 <0x03 0x01 0x01 0x08>; }; }; }; diff --git a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml index 8e0f4ecc010d..6edb1fc5044e 100644 --- a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml +++ b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml @@ -50,18 +50,18 @@ additionalProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/irq.h> - spi { - #address-cells = <1>; - #size-cells = <0>; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; - udc@0 { - compatible = "maxim,max3420-udc"; - reg = <0>; - interrupt-parent = <&gpio>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "udc", "vbus"; - spi-max-frequency = <12500000>; - }; - }; + udc@0 { + compatible = "maxim,max3420-udc"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "udc", "vbus"; + spi-max-frequency = <12500000>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml index 90296613b3a5..c0e313c70bba 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml @@ -189,7 +189,7 @@ examples: #size-cells = <0>; ethernet@1 { - compatible = "usb955,9ff"; - reg = <1>; + compatible = "usb955,9ff"; + reg = <1>; }; }; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 935e204b607b..a2b3cf625e5b 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -16,6 +16,7 @@ properties: - qcom,ipq4019-dwc3 - qcom,ipq5018-dwc3 - qcom,ipq5332-dwc3 + - qcom,ipq5424-dwc3 - qcom,ipq6018-dwc3 - qcom,ipq8064-dwc3 - qcom,ipq8074-dwc3 @@ -26,6 +27,7 @@ properties: - qcom,msm8998-dwc3 - qcom,qcm2290-dwc3 - qcom,qcs404-dwc3 + - qcom,qcs615-dwc3 - qcom,qcs8300-dwc3 - qcom,qdu1000-dwc3 - qcom,sa8775p-dwc3 @@ -341,6 +343,7 @@ allOf: contains: enum: - qcom,qcm2290-dwc3 + - qcom,qcs615-dwc3 - qcom,sar2130p-dwc3 - qcom,sc8180x-dwc3 - qcom,sc8180x-dwc3-mp @@ -453,8 +456,10 @@ allOf: then: properties: interrupts: + minItems: 3 maxItems: 4 interrupt-names: + minItems: 3 items: - const: pwr_event - const: dp_hs_phy_irq @@ -469,6 +474,7 @@ allOf: - qcom,ipq4019-dwc3 - qcom,ipq8064-dwc3 - qcom,msm8994-dwc3 + - qcom,qcs615-dwc3 - qcom,qcs8300-dwc3 - qcom,qdu1000-dwc3 - qcom,sa8775p-dwc3 diff --git a/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml b/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml index ff625600d9af..b87e139c29e5 100644 --- a/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml @@ -104,26 +104,26 @@ examples: #size-cells = <1>; usb3host: usb@85060000 { - compatible = "renesas,r9a09g011-xhci", - "renesas,rzv2m-xhci"; - reg = <0x85060000 0x2000>; - interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>, - <&cpg CPG_MOD R9A09G011_USB_PCLK>; - clock-names = "axi", "reg"; - power-domains = <&cpg>; - resets = <&cpg R9A09G011_USB_ARESETN_H>; + compatible = "renesas,r9a09g011-xhci", + "renesas,rzv2m-xhci"; + reg = <0x85060000 0x2000>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + power-domains = <&cpg>; + resets = <&cpg R9A09G011_USB_ARESETN_H>; }; usb3peri: usb3peri@85070000 { - compatible = "renesas,r9a09g011-usb3-peri", - "renesas,rzv2m-usb3-peri"; - reg = <0x85070000 0x400>; - interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, - <&cpg CPG_MOD R9A09G011_USB_PCLK>; - clock-names = "axi", "reg"; - power-domains = <&cpg>; - resets = <&cpg R9A09G011_USB_ARESETN_P>; + compatible = "renesas,r9a09g011-usb3-peri", + "renesas,rzv2m-usb3-peri"; + reg = <0x85070000 0x400>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + power-domains = <&cpg>; + resets = <&cpg R9A09G011_USB_ARESETN_P>; }; }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml index b2b811a0ade8..4e56e4ffeaf2 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml @@ -132,19 +132,19 @@ examples: usb-role-switch; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - usb3_hs_ep: endpoint { - remote-endpoint = <&hs_ep>; - }; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; }; - port@1 { - reg = <1>; - usb3_role_switch: endpoint { - remote-endpoint = <&hd3ss3220_out_ep>; - }; + }; + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index b23ef29bf794..980f325341d4 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -26,6 +26,7 @@ properties: - renesas,usbhs-r9a07g043 # RZ/G2UL and RZ/Five - renesas,usbhs-r9a07g044 # RZ/G2{L,LC} - renesas,usbhs-r9a07g054 # RZ/V2L + - renesas,usbhs-r9a08g045 # RZ/G3S - const: renesas,rzg2l-usbhs - items: @@ -130,6 +131,7 @@ allOf: - renesas,usbhs-r9a07g043 - renesas,usbhs-r9a07g044 - renesas,usbhs-r9a07g054 + - renesas,usbhs-r9a08g045 then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml new file mode 100644 index 000000000000..c956053fd036 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml @@ -0,0 +1,415 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/snps,dwc3-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare USB3 Controller common properties + +maintainers: + - Felipe Balbi <balbi@kernel.org> + +description: + Defines the properties of the DWC3 core as being embedded in either an + vendor-specific implementation or as a standalone component. + +allOf: + - $ref: usb-drd.yaml# + - if: + properties: + dr_mode: + const: peripheral + + required: + - dr_mode + then: + $ref: usb.yaml# + else: + $ref: usb-xhci.yaml# + +properties: + extcon: + maxItems: 1 + deprecated: true + + usb-phy: + minItems: 1 + items: + - description: USB2/HS PHY + - description: USB3/SS PHY + + phys: + minItems: 1 + maxItems: 19 + + phy-names: + minItems: 1 + maxItems: 19 + oneOf: + - items: + enum: [ usb2-phy, usb3-phy ] + - items: + pattern: "^usb(2-([0-9]|1[0-4])|3-[0-3])$" + + snps,usb2-lpm-disable: + description: Indicate if we don't want to enable USB2 HW LPM for host + mode. + type: boolean + + snps,usb3_lpm_capable: + description: Determines if platform is USB3 LPM capable + type: boolean + + snps,usb2-gadget-lpm-disable: + description: Indicate if we don't want to enable USB2 HW LPM for gadget + mode. + type: boolean + + snps,dis-start-transfer-quirk: + description: + When set, disable isoc START TRANSFER command failure SW work-around + for DWC_usb31 version 1.70a-ea06 and prior. + type: boolean + + snps,disable_scramble_quirk: + description: + True when SW should disable data scrambling. Only really useful for FPGA + builds. + type: boolean + + snps,has-lpm-erratum: + description: True when DWC3 was configured with LPM Erratum enabled + type: boolean + + snps,lpm-nyet-threshold: + description: LPM NYET threshold + $ref: /schemas/types.yaml#/definitions/uint8 + + snps,u2exit_lfps_quirk: + description: Set if we want to enable u2exit lfps quirk + type: boolean + + snps,u2ss_inp3_quirk: + description: Set if we enable P3 OK for U2/SS Inactive quirk + type: boolean + + snps,req_p1p2p3_quirk: + description: + When set, the core will always request for P1/P2/P3 transition sequence. + type: boolean + + snps,del_p1p2p3_quirk: + description: + When set core will delay P1/P2/P3 until a certain amount of 8B10B errors + occur. + type: boolean + + snps,del_phy_power_chg_quirk: + description: When set core will delay PHY power change from P0 to P1/P2/P3. + type: boolean + + snps,lfps_filter_quirk: + description: When set core will filter LFPS reception. + type: boolean + + snps,rx_detect_poll_quirk: + description: + when set core will disable a 400us delay to start Polling LFPS after + RX.Detect. + type: boolean + + snps,tx_de_emphasis_quirk: + description: When set core will set Tx de-emphasis value + type: boolean + + snps,tx_de_emphasis: + description: + The value driven to the PHY is controlled by the LTSSM during USB3 + Compliance mode. + $ref: /schemas/types.yaml#/definitions/uint8 + enum: + - 0 # -6dB de-emphasis + - 1 # -3.5dB de-emphasis + - 2 # No de-emphasis + + snps,dis_u3_susphy_quirk: + description: When set core will disable USB3 suspend phy + type: boolean + + snps,dis_u2_susphy_quirk: + description: When set core will disable USB2 suspend phy + type: boolean + + snps,dis_enblslpm_quirk: + description: + When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal + to the PHY. + type: boolean + + snps,dis-u1-entry-quirk: + description: Set if link entering into U1 needs to be disabled + type: boolean + + snps,dis-u2-entry-quirk: + description: Set if link entering into U2 needs to be disabled + type: boolean + + snps,dis_rxdet_inp3_quirk: + description: + When set core will disable receiver detection in PHY P3 power state. + type: boolean + + snps,dis-u2-freeclk-exists-quirk: + description: + When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2 + PHY doesn't provide a free-running PHY clock. + type: boolean + + snps,dis-del-phy-power-chg-quirk: + description: + When set core will change PHY power from P0 to P1/P2/P3 without delay. + type: boolean + + snps,dis-tx-ipgap-linecheck-quirk: + description: When set, disable u2mac linestate check during HS transmit + type: boolean + + snps,parkmode-disable-ss-quirk: + description: + When set, all SuperSpeed bus instances in park mode are disabled. + type: boolean + + snps,parkmode-disable-hs-quirk: + description: + When set, all HighSpeed bus instances in park mode are disabled. + type: boolean + + snps,dis_metastability_quirk: + description: + When set, disable metastability workaround. CAUTION! Use only if you are + absolutely sure of it. + type: boolean + + snps,dis-split-quirk: + description: + When set, change the way URBs are handled by the driver. Needed to + avoid -EPROTO errors with usbhid on some devices (Hikey 970). + type: boolean + + snps,gfladj-refclk-lpm-sel-quirk: + description: + When set, run the SOF/ITP counter based on ref_clk. + type: boolean + + snps,resume-hs-terminations: + description: + Fix the issue of HS terminations CRC error on resume by enabling this + quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end + of resume. This option is to support certain legacy ULPI PHYs. + type: boolean + + snps,ulpi-ext-vbus-drv: + description: + Some ULPI USB PHY does not support internal VBUS supply, and driving + the CPEN pin, requires the configuration of the ulpi DRVVBUSEXTERNAL + bit. When set, the xhci host will configure the USB2 PHY drives VBUS + with an external supply. + type: boolean + + snps,is-utmi-l1-suspend: + description: + True when DWC3 asserts output signal utmi_l1_suspend_n, false when + asserts utmi_sleep_n. + type: boolean + + snps,hird-threshold: + description: HIRD threshold + $ref: /schemas/types.yaml#/definitions/uint8 + + snps,hsphy_interface: + description: + High-Speed PHY interface selection between UTMI+ and ULPI when the + DWC_USB3_HSPHY_INTERFACE has value 3. + $ref: /schemas/types.yaml#/definitions/string + enum: [utmi, ulpi] + + snps,quirk-frame-length-adjustment: + description: + Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame + length adjustment when the fladj_30mhz_sdbnd signal is invalid or + incorrect. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x3f + + snps,ref-clock-period-ns: + description: + Value for REFCLKPER field of GUCTL register for reference clock period in + nanoseconds, when the hardware set default does not match the actual + clock. + + This binding is deprecated. Instead, provide an appropriate reference clock. + minimum: 8 + maximum: 62 + deprecated: true + + snps,rx-thr-num-pkt: + description: + USB RX packet threshold count. In host mode, this field specifies + the space that must be available in the RX FIFO before the core can + start the corresponding USB RX transaction (burst). + In device mode, this field specifies the space that must be + available in the RX FIFO before the core can send ERDY for a + flow-controlled endpoint. It is only used for SuperSpeed. + The valid values for this field are from 1 to 15. (DWC3 SuperSpeed + USB 3.0 Controller Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + + snps,rx-max-burst: + description: + Max USB RX burst size. In host mode, this field specifies the + Maximum Bulk IN burst the DWC_usb3 core can perform. When the system + bus is slower than the USB, RX FIFO can overrun during a long burst. + You can program a smaller value to this field to limit the RX burst + size that the core can perform. It only applies to SS Bulk, + Isochronous, and Interrupt IN endpoints in the host mode. + In device mode, this field specifies the NUMP value that is sent in + ERDY for an OUT endpoint. + The valid values for this field are from 1 to 16. (DWC3 SuperSpeed + USB 3.0 Controller Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-thr-num-pkt: + description: + USB TX packet threshold count. This field specifies the number of + packets that must be in the TXFIFO before the core can start + transmission for the corresponding USB transaction (burst). + This count is valid in both host and device modes. It is only used + for SuperSpeed operation. + Valid values are from 1 to 15. (DWC3 SuperSpeed USB 3.0 Controller + Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + + snps,tx-max-burst: + description: + Max USB TX burst size. When the system bus is slower than the USB, + TX FIFO can underrun during a long burst. Program a smaller value + to this field to limit the TX burst size that the core can execute. + In Host mode, it only applies to SS Bulk, Isochronous, and Interrupt + OUT endpoints. This value is not used in device mode. + Valid values are from 1 to 16. (DWC3 SuperSpeed USB 3.0 Controller + Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,rx-thr-num-pkt-prd: + description: + Periodic ESS RX packet threshold count (host mode only). Set this and + snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.4) to enable periodic ESS RX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,rx-max-burst-prd: + description: + Max periodic ESS RX burst size (host mode only). Set this and + snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.4) to enable periodic ESS RX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-thr-num-pkt-prd: + description: + Periodic ESS TX packet threshold count (host mode only). Set this and + snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.3) to enable periodic ESS TX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-max-burst-prd: + description: + Max periodic ESS TX burst size (host mode only). Set this and + snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.3) to enable periodic ESS TX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + tx-fifo-resize: + description: Determines if the TX fifos can be dynamically resized depending + on the number of IN endpoints used and if bursting is supported. This + may help improve bandwidth on platforms with higher system latencies, as + increased fifo space allows for the controller to prefetch data into its + internal memory. + type: boolean + + tx-fifo-max-num: + description: Specifies the max number of packets the txfifo resizing logic + can account for when higher endpoint bursting is used. (bMaxBurst > 6) The + higher the number, the more fifo space the txfifo resizing logic will + allocate for that endpoint. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 3 + + snps,incr-burst-type-adjustment: + description: + Value for INCR burst type of GSBUSCFG0 register, undefined length INCR + burst type enable and INCRx type. A single value means INCRX burst mode + enabled. If more than one value specified, undefined length INCR burst + type will be enabled with burst lengths utilized up to the maximum + of the values passed in this property. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + enum: [1, 4, 8, 16, 32, 64, 128, 256] + + num-hc-interrupters: + maximum: 8 + default: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + This port is used with the 'usb-role-switch' property to connect the + dwc3 to type C connector. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Those ports should be used with any connector to the data bus of this + controller using the OF graph bindings specified if the "usb-role-switch" + property is used. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: High Speed (HS) data bus. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) data bus. + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable USB remote wakeup. + +required: + - compatible + - reg + +additionalProperties: true +... + diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 1cd0ca90127d..4380bb6fa2f0 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -15,18 +15,7 @@ description: compatible string. allOf: - - $ref: usb-drd.yaml# - - if: - properties: - dr_mode: - const: peripheral - - required: - - dr_mode - then: - $ref: usb.yaml# - else: - $ref: usb-xhci.yaml# + - $ref: snps,dwc3-common.yaml# properties: compatible: @@ -70,32 +59,9 @@ properties: dma-coherent: true - extcon: - maxItems: 1 - deprecated: true - iommus: maxItems: 1 - usb-phy: - minItems: 1 - items: - - description: USB2/HS PHY - - description: USB3/SS PHY - - phys: - minItems: 1 - maxItems: 19 - - phy-names: - minItems: 1 - maxItems: 19 - oneOf: - - items: - enum: [ usb2-phy, usb3-phy ] - - items: - pattern: "^usb(2-([0-9]|1[0-4])|3-[0-3])$" - power-domains: description: The DWC3 has 2 power-domains. The power management unit (PMU) and @@ -109,361 +75,6 @@ properties: resets: minItems: 1 - snps,usb2-lpm-disable: - description: Indicate if we don't want to enable USB2 HW LPM for host - mode. - type: boolean - - snps,usb3_lpm_capable: - description: Determines if platform is USB3 LPM capable - type: boolean - - snps,usb2-gadget-lpm-disable: - description: Indicate if we don't want to enable USB2 HW LPM for gadget - mode. - type: boolean - - snps,dis-start-transfer-quirk: - description: - When set, disable isoc START TRANSFER command failure SW work-around - for DWC_usb31 version 1.70a-ea06 and prior. - type: boolean - - snps,disable_scramble_quirk: - description: - True when SW should disable data scrambling. Only really useful for FPGA - builds. - type: boolean - - snps,has-lpm-erratum: - description: True when DWC3 was configured with LPM Erratum enabled - type: boolean - - snps,lpm-nyet-threshold: - description: LPM NYET threshold - $ref: /schemas/types.yaml#/definitions/uint8 - - snps,u2exit_lfps_quirk: - description: Set if we want to enable u2exit lfps quirk - type: boolean - - snps,u2ss_inp3_quirk: - description: Set if we enable P3 OK for U2/SS Inactive quirk - type: boolean - - snps,req_p1p2p3_quirk: - description: - When set, the core will always request for P1/P2/P3 transition sequence. - type: boolean - - snps,del_p1p2p3_quirk: - description: - When set core will delay P1/P2/P3 until a certain amount of 8B10B errors - occur. - type: boolean - - snps,del_phy_power_chg_quirk: - description: When set core will delay PHY power change from P0 to P1/P2/P3. - type: boolean - - snps,lfps_filter_quirk: - description: When set core will filter LFPS reception. - type: boolean - - snps,rx_detect_poll_quirk: - description: - when set core will disable a 400us delay to start Polling LFPS after - RX.Detect. - type: boolean - - snps,tx_de_emphasis_quirk: - description: When set core will set Tx de-emphasis value - type: boolean - - snps,tx_de_emphasis: - description: - The value driven to the PHY is controlled by the LTSSM during USB3 - Compliance mode. - $ref: /schemas/types.yaml#/definitions/uint8 - enum: - - 0 # -6dB de-emphasis - - 1 # -3.5dB de-emphasis - - 2 # No de-emphasis - - snps,dis_u3_susphy_quirk: - description: When set core will disable USB3 suspend phy - type: boolean - - snps,dis_u2_susphy_quirk: - description: When set core will disable USB2 suspend phy - type: boolean - - snps,dis_enblslpm_quirk: - description: - When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal - to the PHY. - type: boolean - - snps,dis-u1-entry-quirk: - description: Set if link entering into U1 needs to be disabled - type: boolean - - snps,dis-u2-entry-quirk: - description: Set if link entering into U2 needs to be disabled - type: boolean - - snps,dis_rxdet_inp3_quirk: - description: - When set core will disable receiver detection in PHY P3 power state. - type: boolean - - snps,dis-u2-freeclk-exists-quirk: - description: - When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2 - PHY doesn't provide a free-running PHY clock. - type: boolean - - snps,dis-del-phy-power-chg-quirk: - description: - When set core will change PHY power from P0 to P1/P2/P3 without delay. - type: boolean - - snps,dis-tx-ipgap-linecheck-quirk: - description: When set, disable u2mac linestate check during HS transmit - type: boolean - - snps,parkmode-disable-ss-quirk: - description: - When set, all SuperSpeed bus instances in park mode are disabled. - type: boolean - - snps,parkmode-disable-hs-quirk: - description: - When set, all HighSpeed bus instances in park mode are disabled. - type: boolean - - snps,dis_metastability_quirk: - description: - When set, disable metastability workaround. CAUTION! Use only if you are - absolutely sure of it. - type: boolean - - snps,dis-split-quirk: - description: - When set, change the way URBs are handled by the driver. Needed to - avoid -EPROTO errors with usbhid on some devices (Hikey 970). - type: boolean - - snps,gfladj-refclk-lpm-sel-quirk: - description: - When set, run the SOF/ITP counter based on ref_clk. - type: boolean - - snps,resume-hs-terminations: - description: - Fix the issue of HS terminations CRC error on resume by enabling this - quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end - of resume. This option is to support certain legacy ULPI PHYs. - type: boolean - - snps,ulpi-ext-vbus-drv: - description: - Some ULPI USB PHY does not support internal VBUS supply, and driving - the CPEN pin, requires the configuration of the ulpi DRVVBUSEXTERNAL - bit. When set, the xhci host will configure the USB2 PHY drives VBUS - with an external supply. - type: boolean - - snps,is-utmi-l1-suspend: - description: - True when DWC3 asserts output signal utmi_l1_suspend_n, false when - asserts utmi_sleep_n. - type: boolean - - snps,hird-threshold: - description: HIRD threshold - $ref: /schemas/types.yaml#/definitions/uint8 - - snps,hsphy_interface: - description: - High-Speed PHY interface selection between UTMI+ and ULPI when the - DWC_USB3_HSPHY_INTERFACE has value 3. - $ref: /schemas/types.yaml#/definitions/string - enum: [utmi, ulpi] - - snps,quirk-frame-length-adjustment: - description: - Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame - length adjustment when the fladj_30mhz_sdbnd signal is invalid or - incorrect. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 0x3f - - snps,ref-clock-period-ns: - description: - Value for REFCLKPER field of GUCTL register for reference clock period in - nanoseconds, when the hardware set default does not match the actual - clock. - - This binding is deprecated. Instead, provide an appropriate reference clock. - minimum: 8 - maximum: 62 - deprecated: true - - snps,rx-thr-num-pkt: - description: - USB RX packet threshold count. In host mode, this field specifies - the space that must be available in the RX FIFO before the core can - start the corresponding USB RX transaction (burst). - In device mode, this field specifies the space that must be - available in the RX FIFO before the core can send ERDY for a - flow-controlled endpoint. It is only used for SuperSpeed. - The valid values for this field are from 1 to 15. (DWC3 SuperSpeed - USB 3.0 Controller Databook) - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 15 - - snps,rx-max-burst: - description: - Max USB RX burst size. In host mode, this field specifies the - Maximum Bulk IN burst the DWC_usb3 core can perform. When the system - bus is slower than the USB, RX FIFO can overrun during a long burst. - You can program a smaller value to this field to limit the RX burst - size that the core can perform. It only applies to SS Bulk, - Isochronous, and Interrupt IN endpoints in the host mode. - In device mode, this field specifies the NUMP value that is sent in - ERDY for an OUT endpoint. - The valid values for this field are from 1 to 16. (DWC3 SuperSpeed - USB 3.0 Controller Databook) - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,tx-thr-num-pkt: - description: - USB TX packet threshold count. This field specifies the number of - packets that must be in the TXFIFO before the core can start - transmission for the corresponding USB transaction (burst). - This count is valid in both host and device modes. It is only used - for SuperSpeed operation. - Valid values are from 1 to 15. (DWC3 SuperSpeed USB 3.0 Controller - Databook) - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 15 - - snps,tx-max-burst: - description: - Max USB TX burst size. When the system bus is slower than the USB, - TX FIFO can underrun during a long burst. Program a smaller value - to this field to limit the TX burst size that the core can execute. - In Host mode, it only applies to SS Bulk, Isochronous, and Interrupt - OUT endpoints. This value is not used in device mode. - Valid values are from 1 to 16. (DWC3 SuperSpeed USB 3.0 Controller - Databook) - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,rx-thr-num-pkt-prd: - description: - Periodic ESS RX packet threshold count (host mode only). Set this and - snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.4) to enable periodic ESS RX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,rx-max-burst-prd: - description: - Max periodic ESS RX burst size (host mode only). Set this and - snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.4) to enable periodic ESS RX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,tx-thr-num-pkt-prd: - description: - Periodic ESS TX packet threshold count (host mode only). Set this and - snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.3) to enable periodic ESS TX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,tx-max-burst-prd: - description: - Max periodic ESS TX burst size (host mode only). Set this and - snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.3) to enable periodic ESS TX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - tx-fifo-resize: - description: Determines if the TX fifos can be dynamically resized depending - on the number of IN endpoints used and if bursting is supported. This - may help improve bandwidth on platforms with higher system latencies, as - increased fifo space allows for the controller to prefetch data into its - internal memory. - type: boolean - - tx-fifo-max-num: - description: Specifies the max number of packets the txfifo resizing logic - can account for when higher endpoint bursting is used. (bMaxBurst > 6) The - higher the number, the more fifo space the txfifo resizing logic will - allocate for that endpoint. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 3 - - snps,incr-burst-type-adjustment: - description: - Value for INCR burst type of GSBUSCFG0 register, undefined length INCR - burst type enable and INCRx type. A single value means INCRX burst mode - enabled. If more than one value specified, undefined length INCR burst - type will be enabled with burst lengths utilized up to the maximum - of the values passed in this property. - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 1 - maxItems: 8 - uniqueItems: true - items: - enum: [1, 4, 8, 16, 32, 64, 128, 256] - - num-hc-interrupters: - maximum: 8 - default: 1 - - port: - $ref: /schemas/graph.yaml#/properties/port - description: - This port is used with the 'usb-role-switch' property to connect the - dwc3 to type C connector. - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: - Those ports should be used with any connector to the data bus of this - controller using the OF graph bindings specified if the "usb-role-switch" - property is used. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: High Speed (HS) data bus. - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: Super Speed (SS) data bus. - - wakeup-source: - $ref: /schemas/types.yaml#/definitions/flag - description: - Enable USB remote wakeup. - unevaluatedProperties: false required: diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml index 54c6586cb56d..bec1c8047bc0 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -56,26 +56,26 @@ examples: #size-cells = <0>; hd3ss3220@47 { - compatible = "ti,hd3ss3220"; - reg = <0x47>; - interrupt-parent = <&gpio6>; - interrupts = <3>; + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <3>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - hd3ss3220_in_ep: endpoint { - remote-endpoint = <&ss_ep>; - }; - }; - port@1 { - reg = <1>; - hd3ss3220_out_ep: endpoint { - remote-endpoint = <&usb3_role_switch>; - }; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; }; + port@1 { + reg = <1>; + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml b/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml index ddda734f36fb..c4a91b3d6612 100644 --- a/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml @@ -48,8 +48,8 @@ examples: device_type = "pci"; usb@0 { - compatible = "pci104c,8241"; - reg = <0x0 0x0 0x0 0x0 0x0>; - ti,pwron-active-high; + compatible = "pci104c,8241"; + reg = <0x0 0x0 0x0 0x0 0x0>; + ti,pwron-active-high; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml index 8ef117793e11..61217da8b2f3 100644 --- a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml +++ b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml @@ -51,19 +51,19 @@ examples: /* 2.0 hub on port 1 */ hub_2_0: hub@1 { - compatible = "usb451,8027"; - reg = <1>; - peer-hub = <&hub_3_0>; - reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; - vdd-supply = <&usb_hub_fixed_3v3>; + compatible = "usb451,8027"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; }; /* 3.0 hub on port 2 */ hub_3_0: hub@2 { - compatible = "usb451,8025"; - reg = <2>; - peer-hub = <&hub_2_0>; - reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; - vdd-supply = <&usb_hub_fixed_3v3>; + compatible = "usb451,8025"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml index c2e29bd61e11..bce730a5e237 100644 --- a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml @@ -51,17 +51,17 @@ examples: /* 2.0 hub on port 1 */ hub_2_0: hub@1 { - compatible = "usb451,8142"; - reg = <1>; - peer-hub = <&hub_3_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; /* 3.0 hub on port 2 */ hub_3_0: hub@2 { - compatible = "usb451,8140"; - reg = <2>; - peer-hub = <&hub_2_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index da01616802c7..5079ca6ce1d1 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -218,6 +218,8 @@ patternProperties: description: Shenzhen BigTree Tech Co., LTD "^bitmain,.*": description: Bitmain Technologies + "^blaize,.*": + description: Blaize, Inc. "^blutek,.*": description: BluTek Power "^boe,.*": @@ -575,6 +577,8 @@ patternProperties: description: Gemtek Technology Co., Ltd. "^genesys,.*": description: Genesys Logic, Inc. + "^genexis,.*": + description: Genexis BV/AB "^geniatech,.*": description: Geniatech, Inc. "^giantec,.*": @@ -1204,6 +1208,8 @@ patternProperties: description: PulsedLight, Inc "^purism,.*": description: Purism, SPC + "^puya,.*": + description: Puya Semiconductor (Shanghai) Co., Ltd. "^qca,.*": description: Qualcomm Atheros, Inc. "^qcom,.*": @@ -1336,6 +1342,8 @@ patternProperties: description: Siemens AG "^sifive,.*": description: SiFive, Inc. + "^siflower,.*": + description: Shanghai Siflower Communication Co. "^sigma,.*": description: Sigma Designs, Inc. "^sii,.*": @@ -1524,6 +1532,8 @@ patternProperties: description: Topeet "^topic,.*": description: Topic Embedded Systems + "^topland,.*": + description: Topland Electronics (H.K) Co., Ltd. "^toppoly,.*": description: TPO (deprecated, use tpo) deprecated: true diff --git a/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml index 422becc6e1fa..fe6b3f9a3f8b 100644 --- a/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml +++ b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml @@ -25,6 +25,8 @@ properties: reg: maxItems: 1 + vcc-supply: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/watchdog/airoha,en7581-wdt.yaml b/Documentation/devicetree/bindings/watchdog/airoha,en7581-wdt.yaml new file mode 100644 index 000000000000..6bbab3cb28e5 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/airoha,en7581-wdt.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/airoha,en7581-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Airoha EN7581 Watchdog Timer + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + const: airoha,en7581-wdt + + reg: + maxItems: 1 + + clocks: + description: BUS clock (timer ticks at half the BUS clock) + maxItems: 1 + + clock-names: + const: bus + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/en7523-clk.h> + + watchdog@1fbf0100 { + compatible = "airoha,en7581-wdt"; + reg = <0x1fbf0100 0x3c>; + + clocks = <&scuclk EN7523_CLK_BUS>; + clock-names = "bus"; + }; diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml index 36b836d0620c..0da953cb7127 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml @@ -48,6 +48,8 @@ properties: clocks: maxItems: 1 + big-endian: true + fsl,ext-reset-output: $ref: /schemas/types.yaml#/definitions/flag description: | @@ -93,6 +95,18 @@ allOf: properties: fsl,suspend-in-wait: false + - if: + not: + properties: + compatible: + contains: + enum: + - fsl,ls1012a-wdt + - fsl,ls1043a-wdt + then: + properties: + big-endian: false + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml index 932393f8c649..49e2b807db0b 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -20,12 +20,15 @@ properties: - qcom,kpss-wdt-ipq4019 - qcom,apss-wdt-ipq5018 - qcom,apss-wdt-ipq5332 + - qcom,apss-wdt-ipq5424 - qcom,apss-wdt-ipq9574 - qcom,apss-wdt-msm8226 - qcom,apss-wdt-msm8974 - qcom,apss-wdt-msm8994 - qcom,apss-wdt-qcm2290 - qcom,apss-wdt-qcs404 + - qcom,apss-wdt-qcs615 + - qcom,apss-wdt-qcs8300 - qcom,apss-wdt-sa8255p - qcom,apss-wdt-sa8775p - qcom,apss-wdt-sc7180 diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml index 77a5ddd0426e..d175ae968336 100644 --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml @@ -26,6 +26,7 @@ properties: - samsung,exynos7-wdt # for Exynos7 - samsung,exynos850-wdt # for Exynos850 - samsung,exynosautov9-wdt # for Exynosautov9 + - samsung,exynosautov920-wdt # for Exynosautov920 - items: - enum: - tesla,fsd-wdt @@ -77,6 +78,7 @@ allOf: - samsung,exynos7-wdt - samsung,exynos850-wdt - samsung,exynosautov9-wdt + - samsung,exynosautov920-wdt then: required: - samsung,syscon-phandle @@ -88,6 +90,7 @@ allOf: - google,gs101-wdt - samsung,exynos850-wdt - samsung,exynosautov9-wdt + - samsung,exynosautov920-wdt then: properties: clocks: diff --git a/Documentation/devicetree/of_unittest.rst b/Documentation/devicetree/of_unittest.rst index 8864b52d1195..a6c05962add3 100644 --- a/Documentation/devicetree/of_unittest.rst +++ b/Documentation/devicetree/of_unittest.rst @@ -50,15 +50,13 @@ from 'scripts/dtc/of_unittest_expect --help'. The Device Tree Source file (drivers/of/unittest-data/testcases.dts) contains the test data required for executing the unit tests automated in -drivers/of/unittest.c. Currently, following Device Tree Source Include files -(.dtsi) are included in testcases.dts:: +drivers/of/unittest.c. See the content of the folder:: - drivers/of/unittest-data/tests-interrupts.dtsi - drivers/of/unittest-data/tests-platform.dtsi - drivers/of/unittest-data/tests-phandle.dtsi - drivers/of/unittest-data/tests-match.dtsi + drivers/of/unittest-data/tests-*.dtsi -When the kernel is build with OF_SELFTEST enabled, then the following make +for the Device Tree Source Include files (.dtsi) included in testcases.dts. + +When the kernel is build with CONFIG_OF_UNITTEST enabled, then the following make rule:: $(obj)/%.dtb: $(src)/%.dts FORCE |