diff options
Diffstat (limited to 'Documentation/devicetree')
19 files changed, 163 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index d6b794cef0b8..91e6e5c478d0 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -199,6 +199,7 @@ nodes to be present and contain the properties described below. "qcom,kpss-acc-v1" "qcom,kpss-acc-v2" "rockchip,rk3066-smp" + "ste,dbx500-smp" - cpu-release-addr Usage: required for systems that have an "enable-method" diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index 42941fdefb11..67da20539540 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -9,4 +9,6 @@ using one of the following compatible strings: allwinner,sun6i-a31 allwinner,sun7i-a20 allwinner,sun8i-a23 + allwinner,sun8i-a33 + allwinner,sun8i-h3 allwinner,sun9i-a80 diff --git a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt index d3058768b23d..c53e0b08032f 100644 --- a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt +++ b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt @@ -35,7 +35,7 @@ Example: device_type = "dma"; reg = <0x0 0x1f270000 0x0 0x10000>, <0x0 0x1f200000 0x0 0x10000>, - <0x0 0x1b008000 0x0 0x2000>, + <0x0 0x1b000000 0x0 0x400000>, <0x0 0x1054a000 0x0 0x100>; interrupts = <0x0 0x82 0x4>, <0x0 0xb8 0x4>, diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt index e75f0e549fff..971c3eedb1c7 100644 --- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt @@ -65,8 +65,10 @@ Optional properties: - edid: verbatim EDID data block describing attached display. - ddc: phandle describing the i2c bus handling the display data channel -- port: A port node with endpoint definitions as defined in +- port@[0-1]: Port nodes with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + Port 0 is the input port connected to the IPU display interface, + port 1 is the output port connected to a panel. example: @@ -75,9 +77,29 @@ display@di0 { edid = [edid-data]; interface-pix-fmt = "rgb24"; - port { + port@0 { + reg = <0>; + display_in: endpoint { remote-endpoint = <&ipu_di0_disp0>; }; }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +panel { + ... + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; }; diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt index c03eec116872..3443e0f838df 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt +++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt @@ -35,3 +35,6 @@ the PCIe specification. NOTE: this only applies to the SMMU itself, not masters connected upstream of the SMMU. + +- hisilicon,broken-prefetch-cmd + : Avoid sending CMD_PREFETCH_* commands to the SMMU. diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 938f8e1ba205..0db60470ebb6 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -8,6 +8,7 @@ of the EMIF IP and memory parts attached to it. Required properties: - compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev> is the IP revision of the specific EMIF instance. + For am437x should be ti,emif-am4372. - phy-type : <u32> indicating the DDR phy type. Following are the allowed values diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 5d0376b8f202..211e7785f4d2 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -17,7 +17,6 @@ Required properties: "fsl,imx6sx-usdhc" Optional properties: -- fsl,cd-controller : Indicate to use controller internal card detection - fsl,wp-controller : Indicate to use controller internal write protection - fsl,delay-line : Specify the number of delay cells for override mode. This is used to set the clock delay for DLL(Delay Line) on override mode @@ -35,7 +34,6 @@ esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; - fsl,cd-controller; fsl,wp-controller; }; diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 305e3df3d9b1..9cf9446eaf2e 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -82,6 +82,9 @@ Optional properties: - id: If there are multiple instance of the same type, in order to differentiate between each instance "id" can be used (e.g., multi-lane PCIe PHY). If "id" is not provided, it is set to default value of '1'. + - syscon-pllreset: Handle to system control region that contains the + CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0 + register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy. This is usually a subnode of ocp2scp to which it is connected. @@ -100,3 +103,16 @@ usb3phy@4a084400 { "sysclk", "refclk"; }; + +sata_phy: phy@4A096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin1>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; + syscon-pllreset = <&scm_conf 0x3fc>; + #phy-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/sound/cs4349.txt b/Documentation/devicetree/bindings/sound/cs4349.txt new file mode 100644 index 000000000000..54c117b59dba --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs4349.txt @@ -0,0 +1,19 @@ +CS4349 audio CODEC + +Required properties: + + - compatible : "cirrus,cs4349" + + - reg : the I2C address of the device for I2C + +Optional properties: + + - reset-gpios : a GPIO spec for the reset pin. + +Example: + +codec: cs4349@48 { + compatible = "cirrus,cs4349"; + reg = <0x48>; + reset-gpios = <&gpio 54 0>; +}; diff --git a/Documentation/devicetree/bindings/sound/ics43432.txt b/Documentation/devicetree/bindings/sound/ics43432.txt new file mode 100644 index 000000000000..b02e3a6c0fef --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ics43432.txt @@ -0,0 +1,17 @@ +Invensense ICS-43432 MEMS microphone with I2S output. + +There are no software configuration options for this device, indeed, the only +host connection is the I2S interface. Apart from requirements on clock +frequency (460 kHz to 3.379 MHz according to the data sheet) there must be +64 clock cycles in each stereo output frame; 24 of the 32 available bits +contain audio data. A hardware pin determines if the device outputs data +on the left or right channel of the I2S frame. + +Required properties: + - compatible : Must be "invensense,ics43432" + +Example: + + ics43432: ics43432 { + compatible = "invensense,ics43432"; + }; diff --git a/Documentation/devicetree/bindings/sound/max98357a.txt b/Documentation/devicetree/bindings/sound/max98357a.txt index a7a149a236e5..28645a2ff885 100644 --- a/Documentation/devicetree/bindings/sound/max98357a.txt +++ b/Documentation/devicetree/bindings/sound/max98357a.txt @@ -4,7 +4,11 @@ This node models the Maxim MAX98357A DAC. Required properties: - compatible : "maxim,max98357a" -- sdmode-gpios : GPIO specifier for the GPIO -> DAC SDMODE pin + +Optional properties: +- sdmode-gpios : GPIO specifier for the chip's SD_MODE pin. + If this option is not specified then driver does not manage + the pin state (e.g. chip is always on). Example: diff --git a/Documentation/devicetree/bindings/sound/mt8173-max98090.txt b/Documentation/devicetree/bindings/sound/mt8173-max98090.txt index 829bd26d17f8..519e97c8f1b8 100644 --- a/Documentation/devicetree/bindings/sound/mt8173-max98090.txt +++ b/Documentation/devicetree/bindings/sound/mt8173-max98090.txt @@ -3,11 +3,13 @@ MT8173 with MAX98090 CODEC Required properties: - compatible : "mediatek,mt8173-max98090" - mediatek,audio-codec: the phandle of the MAX98090 audio codec +- mediatek,platform: the phandle of MT8173 ASoC platform Example: sound { compatible = "mediatek,mt8173-max98090"; mediatek,audio-codec = <&max98090>; + mediatek,platform = <&afe>; }; diff --git a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt index 61e98c976bd4..f205ce9e31dd 100644 --- a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt +++ b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt @@ -3,11 +3,13 @@ MT8173 with RT5650 RT5676 CODECS Required properties: - compatible : "mediatek,mt8173-rt5650-rt5676" - mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs +- mediatek,platform: the phandle of MT8173 ASoC platform Example: sound { compatible = "mediatek,mt8173-rt5650-rt5676"; mediatek,audio-codec = <&rt5650 &rt5676>; + mediatek,platform = <&afe>; }; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index b6b3a786855f..1173395b5e5c 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -18,6 +18,12 @@ Required properties: - rcar_sound,src : Should contain SRC feature. The number of SRC subnode should be same as HW. see below for detail. +- rcar_sound,ctu : Should contain CTU feature. + The number of CTU subnode should be same as HW. + see below for detail. +- rcar_sound,mix : Should contain MIX feature. + The number of MIX subnode should be same as HW. + see below for detail. - rcar_sound,dvc : Should contain DVC feature. The number of DVC subnode should be same as HW. see below for detail. @@ -90,6 +96,22 @@ rcar_sound: sound@ec500000 { }; }; + rcar_sound,mix { + mix0: mix@0 { }; + mix1: mix@1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu@0 { }; + ctu01: ctu@1 { }; + ctu02: ctu@2 { }; + ctu03: ctu@3 { }; + ctu10: ctu@4 { }; + ctu11: ctu@5 { }; + ctu12: ctu@6 { }; + ctu13: ctu@7 { }; + }; + rcar_sound,src { src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt index c64155027288..962748a8d919 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt @@ -6,6 +6,7 @@ Required properties: - compatible : "renesas,rsrc-card,<board>" Examples with soctypes are: + - "renesas,rsrc-card" - "renesas,rsrc-card,lager" - "renesas,rsrc-card,koelsch" Optional properties: @@ -29,6 +30,12 @@ Optional subnode properties: - frame-inversion : bool property. Add this if the dai-link uses frame clock inversion. - convert-rate : platform specified sampling rate convert +- audio-prefix : see audio-routing +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources. + use audio-prefix if some components is using same sink/sources naming. + it can be used if compatible was "renesas,rsrc-card"; Required CPU/CODEC subnodes properties: diff --git a/Documentation/devicetree/bindings/sound/rockchip-max98090.txt b/Documentation/devicetree/bindings/sound/rockchip-max98090.txt new file mode 100644 index 000000000000..a805aa99ad75 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip-max98090.txt @@ -0,0 +1,19 @@ +ROCKCHIP with MAX98090 CODEC + +Required properties: +- compatible: "rockchip,rockchip-audio-max98090" +- rockchip,model: The user-visible name of this sound complex +- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's + connected to the CODEC +- rockchip,audio-codec: The phandle of the MAX98090 audio codec +- rockchip,headset-codec: The phandle of Ext chip for jack detection + +Example: + +sound { + compatible = "rockchip,rockchip-audio-max98090"; + rockchip,model = "ROCKCHIP-I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&max98090>; + rockchip,headset-codec = <&headsetcodec>; +}; diff --git a/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt b/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt new file mode 100644 index 000000000000..411a62b3ff41 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt @@ -0,0 +1,17 @@ +ROCKCHIP with RT5645/RT5650 CODECS + +Required properties: +- compatible: "rockchip,rockchip-audio-rt5645" +- rockchip,model: The user-visible name of this sound complex +- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's + connected to the CODEC +- rockchip,audio-codec: The phandle of the RT5645/RT5650 audio codec + +Example: + +sound { + compatible = "rockchip,rockchip-audio-rt5645"; + rockchip,model = "ROCKCHIP-I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&rt5645>; +}; diff --git a/Documentation/devicetree/bindings/spi/spi-ath79.txt b/Documentation/devicetree/bindings/spi/spi-ath79.txt index f1ad9c367532..9c696fa66f81 100644 --- a/Documentation/devicetree/bindings/spi/spi-ath79.txt +++ b/Documentation/devicetree/bindings/spi/spi-ath79.txt @@ -3,7 +3,7 @@ Binding for Qualcomm Atheros AR7xxx/AR9xxx SPI controller Required properties: - compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback. - reg: Base address and size of the controllers memory area -- clocks: phandle to the AHB clock. +- clocks: phandle of the AHB clock. - clock-names: has to be "ahb". - #address-cells: <1>, as required by generic SPI binding. - #size-cells: <0>, also as required by generic SPI binding. @@ -12,9 +12,9 @@ Child nodes as per the generic SPI binding. Example: - spi@1F000000 { + spi@1f000000 { compatible = "qca,ar9132-spi", "qca,ar7100-spi"; - reg = <0x1F000000 0x10>; + reg = <0x1f000000 0x10>; clocks = <&pll 2>; clock-names = "ahb"; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index d444757c4d9e..66a33ae5f5bc 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -110,6 +110,7 @@ ingenic Ingenic Semiconductor innolux Innolux Corporation intel Intel Corporation intercontrol Inter Control Group +invensense InvenSense Inc. isee ISEE 2007 S.L. isil Intersil karo Ka-Ro electronics GmbH @@ -150,6 +151,7 @@ nvidia NVIDIA nxp NXP Semiconductors onnn ON Semiconductor Corp. opencores OpenCores.org +option Option NV ortustech Ortus Technology Co., Ltd. ovti OmniVision Technologies panasonic Panasonic Corporation |