summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/display/msm/gpu.txt38
-rw-r--r--Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt27
-rw-r--r--Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt7
-rw-r--r--Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt7
-rw-r--r--Documentation/devicetree/bindings/display/panel/panel.txt4
-rw-r--r--Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt7
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt3
-rw-r--r--Documentation/devicetree/bindings/net/mediatek-net.txt2
-rw-r--r--Documentation/devicetree/bindings/net/phy.txt5
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt3
10 files changed, 74 insertions, 29 deletions
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
index 67d0a58dbb77..43fac0fe09bb 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -1,23 +1,19 @@
Qualcomm adreno/snapdragon GPU
Required properties:
-- compatible: "qcom,adreno-3xx"
+- compatible: "qcom,adreno-XYZ.W", "qcom,adreno"
+ for example: "qcom,adreno-306.0", "qcom,adreno"
+ Note that you need to list the less specific "qcom,adreno" (since this
+ is what the device is matched on), in addition to the more specific
+ with the chip-id.
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt signal from the gpu.
- clocks: device clocks
See ../clocks/clock-bindings.txt for details.
- clock-names: the following clocks are required:
- * "core_clk"
- * "iface_clk"
- * "mem_iface_clk"
-- qcom,chipid: gpu chip-id. Note this may become optional for future
- devices if we can reliably read the chipid from hw
-- qcom,gpu-pwrlevels: list of operating points
- - compatible: "qcom,gpu-pwrlevels"
- - for each qcom,gpu-pwrlevel:
- - qcom,gpu-freq: requested gpu clock speed
- - NOTE: downstream android driver defines additional parameters to
- configure memory bandwidth scaling per OPP.
+ * "core"
+ * "iface"
+ * "mem_iface"
Example:
@@ -25,28 +21,18 @@ Example:
...
gpu: qcom,kgsl-3d0@4300000 {
- compatible = "qcom,adreno-3xx";
+ compatible = "qcom,adreno-320.2", "qcom,adreno";
reg = <0x04300000 0x20000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <GIC_SPI 80 0>;
interrupt-names = "kgsl_3d0_irq";
clock-names =
- "core_clk",
- "iface_clk",
- "mem_iface_clk";
+ "core",
+ "iface",
+ "mem_iface";
clocks =
<&mmcc GFX3D_CLK>,
<&mmcc GFX3D_AHB_CLK>,
<&mmcc MMSS_IMEM_AHB_CLK>;
- qcom,chipid = <0x03020100>;
- qcom,gpu-pwrlevels {
- compatible = "qcom,gpu-pwrlevels";
- qcom,gpu-pwrlevel@0 {
- qcom,gpu-freq = <450000000>;
- };
- qcom,gpu-pwrlevel@1 {
- qcom,gpu-freq = <27000000>;
- };
- };
};
};
diff --git a/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
new file mode 100644
index 000000000000..eed48c3d4875
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
@@ -0,0 +1,27 @@
+Multi-Inno MI0283QT display panel
+
+Required properties:
+- compatible: "multi-inno,mi0283qt".
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- dc-gpios: D/C pin. The presence/absence of this GPIO determines
+ the panel interface mode (IM[3:0] pins):
+ - present: IM=x110 4-wire 8-bit data serial interface
+ - absent: IM=x101 3-wire 9-bit data serial interface
+- reset-gpios: Reset pin
+- power-supply: A regulator node for the supply voltage.
+- backlight: phandle of the backlight device attached to the panel
+- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+ mi0283qt@0{
+ compatible = "multi-inno,mi0283qt";
+ reg = <0>;
+ spi-max-frequency = <32000000>;
+ rotation = <90>;
+ dc-gpios = <&gpio 25 0>;
+ backlight = <&backlight>;
+ };
diff --git a/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt b/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt
new file mode 100644
index 000000000000..b258d6a91ec6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt
@@ -0,0 +1,7 @@
+BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,nv101wxmn51"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt b/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt
new file mode 100644
index 000000000000..c6d06b5eab51
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt
@@ -0,0 +1,7 @@
+Netron-DY E231732 7.0" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "netron-dy,e231732"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/panel.txt b/Documentation/devicetree/bindings/display/panel/panel.txt
new file mode 100644
index 000000000000..e2e6867852b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel.txt
@@ -0,0 +1,4 @@
+Common display properties
+-------------------------
+
+- rotation: Display rotation in degrees counter clockwise (0,90,180,270)
diff --git a/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt b/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt
new file mode 100644
index 000000000000..eb9501a82e25
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt
@@ -0,0 +1,7 @@
+Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "tianma,tm070jdhg30"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
index 0dcb7c7d3e40..944657684d73 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
@@ -15,6 +15,9 @@ Properties:
Second cell specifies the irq distribution mode to cores
0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
+ The second cell in interrupts property is deprecated and may be ignored by
+ the kernel.
+
intc accessed via the special ARC AUX register interface, hence "reg" property
is not specified.
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index c010fafc66a8..c7194e87d5f4 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -7,7 +7,7 @@ have dual GMAC each represented by a child node..
* Ethernet controller node
Required properties:
-- compatible: Should be "mediatek,mt7623-eth"
+- compatible: Should be "mediatek,mt2701-eth"
- reg: Address and length of the register set for the device
- interrupts: Should contain the three frame engines interrupts in numeric
order. These are fe_int0, fe_int1 and fe_int2.
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index ff1bc4b1bb3b..fb5056b22685 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -19,8 +19,9 @@ Optional Properties:
specifications. If neither of these are specified, the default is to
assume clause 22.
- If the phy's identifier is known then the list may contain an entry
- of the form: "ethernet-phy-idAAAA.BBBB" where
+ If the PHY reports an incorrect ID (or none at all) then the
+ "compatible" list may contain an entry with the correct PHY ID in the
+ form: "ethernet-phy-idAAAA.BBBB" where
AAAA - The value of the 16 bit Phy Identifier 1 register as
4 hex digits. This is the chip vendor OUI bits 3:18
BBBB - The value of the 16 bit Phy Identifier 2 register as
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 16d3b5e7f5d1..f98498df2365 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -187,6 +187,7 @@ mpl MPL AG
mqmaker mqmaker Inc.
msi Micro-Star International Co. Ltd.
mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
+multi-inno Multi-Inno Technology Co.,Ltd
mundoreader Mundo Reader S.L.
murata Murata Manufacturing Co., Ltd.
mxicy Macronix International Co., Ltd.
@@ -196,6 +197,7 @@ nec NEC LCD Technologies, Ltd.
neonode Neonode Inc.
netgear NETGEAR
netlogic Broadcom Corporation (formerly NetLogic Microsystems)
+netron-dy Netron DY
netxeon Shenzhen Netxeon Technology CO., LTD
nexbox Nexbox
newhaven Newhaven Display International
@@ -296,6 +298,7 @@ technologic Technologic Systems
terasic Terasic Inc.
thine THine Electronics, Inc.
ti Texas Instruments
+tianma Tianma Micro-electronics Co., Ltd.
tlm Trusted Logic Mobility
topeet Topeet
toradex Toradex AG