diff options
Diffstat (limited to 'Documentation/devicetree')
226 files changed, 5340 insertions, 1173 deletions
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index ffd526363fda..cc5a21b47e26 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -198,6 +198,7 @@ properties: - qcom,kryo660 - qcom,kryo685 - qcom,kryo780 + - qcom,oryon - qcom,scorpion enable-method: diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 32b195852a75..228dcc5c7d6f 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -967,6 +967,7 @@ properties: - menlo,mx8menlo # Verdin iMX8M Mini Module on i.MX8MM Menlo board - toradex,verdin-imx8mm-nonwifi-dahlia # Verdin iMX8M Mini Module on Dahlia - toradex,verdin-imx8mm-nonwifi-dev # Verdin iMX8M Mini Module on Verdin Development Board + - toradex,verdin-imx8mm-nonwifi-mallow # Verdin iMX8M Mini Module on Mallow - toradex,verdin-imx8mm-nonwifi-yavia # Verdin iMX8M Mini Module on Yavia - const: toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Module without Wi-Fi / BT - const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module @@ -977,6 +978,7 @@ properties: - enum: - toradex,verdin-imx8mm-wifi-dahlia # Verdin iMX8M Mini Wi-Fi / BT Module on Dahlia - toradex,verdin-imx8mm-wifi-dev # Verdin iMX8M Mini Wi-Fi / BT M. on Verdin Development B. + - toradex,verdin-imx8mm-wifi-mallow # Verdin iMX8M Mini Wi-Fi / BT Module on Mallow - toradex,verdin-imx8mm-wifi-yavia # Verdin iMX8M Mini Wi-Fi / BT Module on Yavia - const: toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Module - const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module @@ -1022,7 +1024,10 @@ properties: - description: Variscite VAR-SOM-MX8MN based boards items: - - const: variscite,var-som-mx8mn-symphony + - enum: + - dimonoff,gateway-evk # i.MX8MN Dimonoff Gateway EVK Board + - rve,rve-gateway # i.MX8MN RVE Gateway Board + - variscite,var-som-mx8mn-symphony - const: variscite,var-som-mx8mn - const: fsl,imx8mn @@ -1048,6 +1053,9 @@ properties: - gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board + - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel + - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel + - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules - toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Modules without Wi-Fi / BT - toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Modules @@ -1100,6 +1108,7 @@ properties: - enum: - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia - toradex,verdin-imx8mp-nonwifi-dev # Verdin iMX8M Plus Module on Verdin Development Board + - toradex,verdin-imx8mp-nonwifi-mallow # Verdin iMX8M Plus Module on Mallow - toradex,verdin-imx8mp-nonwifi-yavia # Verdin iMX8M Plus Module on Yavia - const: toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Module without Wi-Fi / BT - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module @@ -1110,6 +1119,7 @@ properties: - enum: - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia - toradex,verdin-imx8mp-wifi-dev # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B. + - toradex,verdin-imx8mp-wifi-mallow # Verdin iMX8M Plus Wi-Fi / BT Module on Mallow - toradex,verdin-imx8mp-wifi-yavia # Verdin iMX8M Plus Wi-Fi / BT Module on Yavia - const: toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Module - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module @@ -1476,6 +1486,16 @@ properties: - const: solidrun,lx2162a-som - const: fsl,lx2160a + - description: + TQ-Systems TQMLX2160A is a series of socketable SOM featuring + LX2160A system-on-chip variants. MBLX2160A mainboard can be used a + starterkit. + items: + - enum: + - tq,lx2160a-tqmlx2160a-mblx2160a + - const: tq,lx2160a-tqmlx2160a + - const: fsl,lx2160a + - description: S32G2 based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/google.yaml b/Documentation/devicetree/bindings/arm/google.yaml new file mode 100644 index 000000000000..e20b5c9b16bc --- /dev/null +++ b/Documentation/devicetree/bindings/arm/google.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/google.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google Tensor platforms + +maintainers: + - Peter Griffin <peter.griffin@linaro.org> + +description: | + ARM platforms using SoCs designed by Google branded "Tensor" used in Pixel + devices. + + Currently upstream this is devices using "gs101" SoC which is found in Pixel + 6, Pixel 6 Pro and Pixel 6a. + + Google have a few different names for the SoC: + - Marketing name ("Tensor") + - Codename ("Whitechapel") + - SoC ID ("gs101") + - Die ID ("S5P9845") + + Likewise there are a couple of names for the actual device + - Marketing name ("Pixel 6") + - Codename ("Oriole") + + Devicetrees should use the lowercased SoC ID and lowercased board codename, + e.g. gs101 and gs101-oriole. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Google Pixel 6 / Oriole + items: + - enum: + - google,gs101-oriole + - const: google,gs101 + + # Bootloader requires empty ect node to be present + ect: + type: object + additionalProperties: false + +required: + - ect + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml index 5a53d433b6f0..7a221e1c09df 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml @@ -82,6 +82,23 @@ properties: ranges: true +patternProperties: + '^clock@': + type: object + additionalProperties: false + + properties: + compatible: + enum: + - hisilicon,hi3620-clock + - hisilicon,hi3620-mmc-clock + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml index 52d78521e412..16d2e132d3d1 100644 --- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml +++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml @@ -60,4 +60,26 @@ properties: - const: marvell,armada-ap807-quad - const: marvell,armada-ap807 + - description: + Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus + Armada CN9130 COM Express CPU module + items: + - const: marvell,cn9130-ac5x-carrier + - const: marvell,rd-ac5x-carrier + - const: marvell,cn9130-cpu-module + - const: marvell,cn9130 + - const: marvell,armada-ap807-quad + - const: marvell,armada-ap807 + + - description: + Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus + Armada CN9131 COM Express CPU module + items: + - const: marvell,cn9131-ac5x-carrier + - const: marvell,rd-ac5x-carrier + - const: marvell,cn9131-cpu-module + - const: marvell,cn9131 + - const: marvell,armada-ap807-quad + - const: marvell,armada-ap807 + additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index a5999b3afc35..6f2f64ae76fc 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -176,6 +176,10 @@ properties: - const: mediatek,mt8186 - items: - enum: + - mediatek,mt8188-evb + - const: mediatek,mt8188 + - items: + - enum: - mediatek,mt8192-evb - const: mediatek,mt8192 - items: @@ -235,6 +239,13 @@ properties: items: - const: google,kappa - const: mediatek,mt8183 + - description: Google Katsu (ASUS Chromebook Detachable CZ1) + items: + - enum: + - google,katsu-sku32 + - google,katsu-sku38 + - const: google,katsu + - const: mediatek,mt8183 - description: Google Kodama (Lenovo 10e Chromebook Tablet) items: - enum: @@ -244,6 +255,20 @@ properties: - google,kodama-sku32 - const: google,kodama - const: mediatek,mt8183 + - description: Google Makomo (Lenovo 100e Chromebook 2nd Gen MTK 2) + items: + - enum: + - google,makomo-sku0 + - google,makomo-sku1 + - const: google,makomo + - const: mediatek,mt8183 + - description: Google Pico (Acer Chromebook Spin 311) + items: + - enum: + - google,pico-sku1 + - google,pico-sku2 + - const: google,pico + - const: mediatek,mt8183 - description: Google Willow (Acer Chromebook 311 C722/C722T) items: - enum: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt deleted file mode 100644 index 699776be1dd3..000000000000 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt +++ /dev/null @@ -1,39 +0,0 @@ -MediaTek AUDSYS controller -============================ - -The MediaTek AUDSYS controller provides various clocks to the system. - -Required Properties: - -- compatible: Should be one of: - - "mediatek,mt2701-audsys", "syscon" - - "mediatek,mt6765-audsys", "syscon" - - "mediatek,mt6779-audio", "syscon" - - "mediatek,mt7622-audsys", "syscon" - - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon" - - "mediatek,mt8167-audiosys", "syscon" - - "mediatek,mt8183-audiosys", "syscon" - - "mediatek,mt8192-audsys", "syscon" - - "mediatek,mt8516-audsys", "syscon" -- #clock-cells: Must be 1 - -The AUDSYS controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Required sub-nodes: -------- -For common binding part and usage, refer to -../sonud/mt2701-afe-pcm.txt. - -Example: - - audsys: clock-controller@11220000 { - compatible = "mediatek,mt7622-audsys", "syscon"; - reg = <0 0x11220000 0 0x2000>; - #clock-cells = <1>; - - afe: audio-controller { - ... - }; - }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml new file mode 100644 index 000000000000..45d4a6620041 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/mediatek/mediatek,audsys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek AUDSYS controller + +maintainers: + - Eugen Hristev <eugen.hristev@collabora.com> + +description: + The MediaTek AUDSYS controller provides various clocks to the system. + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-audsys + - mediatek,mt6765-audsys + - mediatek,mt6779-audsys + - mediatek,mt7622-audsys + - mediatek,mt8167-audsys + - mediatek,mt8173-audsys + - mediatek,mt8183-audsys + - mediatek,mt8186-audsys + - mediatek,mt8192-audsys + - mediatek,mt8516-audsys + - const: syscon + - items: + # Special case for mt7623 for backward compatibility + - const: mediatek,mt7623-audsys + - const: mediatek,mt2701-audsys + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + audio-controller: + $ref: /schemas/sound/mediatek,mt2701-audio.yaml# + type: object + +required: + - compatible + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt2701-power.h> + #include <dt-bindings/clock/mt2701-clk.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + audsys: clock-controller@11220000 { + compatible = "mediatek,mt7622-audsys", "syscon"; + reg = <0 0x11220000 0 0x2000>; + #clock-cells = <1>; + + afe: audio-controller { + compatible = "mediatek,mt2701-audio"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "afe", "asys"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_48K_TIMING>, + <&topckgen CLK_TOP_AUD_44K_TIMING>, + <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, + <&topckgen CLK_TOP_AUD_I2S1_MCLK>, + <&topckgen CLK_TOP_AUD_I2S2_MCLK>, + <&topckgen CLK_TOP_AUD_I2S3_MCLK>, + <&topckgen CLK_TOP_AUD_I2S4_MCLK>, + <&audsys CLK_AUD_I2SO1>, + <&audsys CLK_AUD_I2SO2>, + <&audsys CLK_AUD_I2SO3>, + <&audsys CLK_AUD_I2SO4>, + <&audsys CLK_AUD_I2SIN1>, + <&audsys CLK_AUD_I2SIN2>, + <&audsys CLK_AUD_I2SIN3>, + <&audsys CLK_AUD_I2SIN4>, + <&audsys CLK_AUD_ASRCO1>, + <&audsys CLK_AUD_ASRCO2>, + <&audsys CLK_AUD_ASRCO3>, + <&audsys CLK_AUD_ASRCO4>, + <&audsys CLK_AUD_AFE>, + <&audsys CLK_AUD_AFE_CONN>, + <&audsys CLK_AUD_A1SYS>, + <&audsys CLK_AUD_A2SYS>, + <&audsys CLK_AUD_AFE_MRGIF>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_a1sys_hp", + "top_audio_a2sys_hp", + "i2s0_src_sel", + "i2s1_src_sel", + "i2s2_src_sel", + "i2s3_src_sel", + "i2s0_src_div", + "i2s1_src_div", + "i2s2_src_div", + "i2s3_src_div", + "i2s0_mclk_en", + "i2s1_mclk_en", + "i2s2_mclk_en", + "i2s3_mclk_en", + "i2so0_hop_ck", + "i2so1_hop_ck", + "i2so2_hop_ck", + "i2so3_hop_ck", + "i2si0_hop_ck", + "i2si1_hop_ck", + "i2si2_hop_ck", + "i2si3_hop_ck", + "asrc0_out_ck", + "asrc1_out_ck", + "asrc2_out_ck", + "asrc3_out_ck", + "audio_afe_pd", + "audio_afe_conn_pd", + "audio_a1sys_pd", + "audio_a2sys_pd", + "audio_mrgif_pd"; + + assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_MUX1_DIV>, + <&topckgen CLK_TOP_AUD_MUX2_DIV>; + assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>, + <&topckgen CLK_TOP_AUD2PLL_90M>; + assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml index 536f5a5ebd24..b3c6888c1457 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml @@ -32,6 +32,9 @@ properties: - mediatek,mt8183-mmsys - mediatek,mt8186-mmsys - mediatek,mt8188-vdosys0 + - mediatek,mt8188-vdosys1 + - mediatek,mt8188-vppsys0 + - mediatek,mt8188-vppsys1 - mediatek,mt8192-mmsys - mediatek,mt8195-vdosys1 - mediatek,mt8195-vppsys0 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml index 26158d0d72f3..33c94c491828 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml @@ -28,6 +28,7 @@ properties: - mediatek,mt8173-pericfg - mediatek,mt8183-pericfg - mediatek,mt8186-pericfg + - mediatek,mt8188-pericfg - mediatek,mt8195-pericfg - mediatek,mt8516-pericfg - const: syscon diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml index 97621c92a1ab..d0751a572af3 100644 --- a/Documentation/devicetree/bindings/arm/qcom-soc.yaml +++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml @@ -23,7 +23,7 @@ description: | select: properties: compatible: - pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" required: - compatible @@ -31,17 +31,17 @@ properties: compatible: oneOf: # Preferred naming style for compatibles of SoC components: - - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+(pro)?-.*$" + - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+(pro)?-.*$" - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$" # Legacy namings - variations of existing patterns/compatibles are OK, # but do not add completely new entries to these: - - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" + - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" + - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" + - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" + - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" + - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" - enum: - qcom,dsi-ctrl-6g-qcm2290 - qcom,gpucc-sdm630 diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 7f80f48a0954..1a5fb889a444 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -87,29 +87,18 @@ description: | sm8350 sm8450 sm8550 + sm8650 + x1e80100 The 'board' element must be one of the following strings: adp - ap-al02-c2 - ap-al02-c6 - ap-al02-c7 - ap-al02-c8 - ap-al02-c9 - ap-mi01.2 - ap-mi01.3 - ap-mi01.6 - ap-mi01.9 cdp - cp01-c1 dragonboard - hk01 - hk10-c1 - hk10-c2 idp liquid - rdp432-c2 mtp + qcp qrd rb2 ride @@ -138,7 +127,7 @@ description: | There are many devices in the list below that run the standard ChromeOS bootloader setup and use the open source depthcharge bootloader to boot the OS. These devices do not use the scheme described above. For details, see: - https://docs.kernel.org/arm/google/chromebook-boot-flow.html + https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html properties: $nodename: @@ -186,11 +175,24 @@ properties: - items: - enum: + - microsoft,dempsey + - microsoft,makepeace + - microsoft,moneypenny - samsung,s3ve3g - const: qcom,msm8226 - items: - enum: + - htc,memul + - microsoft,superman-lte + - microsoft,tesla + - motorola,peregrine + - const: qcom,msm8926 + - const: qcom,msm8226 + + - items: + - enum: + - huawei,kiwi - longcheer,l9100 - samsung,a7 - sony,kanuti-tulip @@ -397,6 +399,8 @@ properties: - items: - enum: - fairphone,fp5 + - qcom,qcm6490-idp + - qcom,qcs6490-rb3gen2 - const: qcom,qcm6490 - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform @@ -1009,6 +1013,7 @@ properties: - sony,pdx203-generic - sony,pdx206-generic - xiaomi,elish + - xiaomi,pipa - const: qcom,sm8250 - items: @@ -1034,6 +1039,18 @@ properties: - qcom,sm8550-qrd - const: qcom,sm8550 + - items: + - enum: + - qcom,sm8650-mtp + - qcom,sm8650-qrd + - const: qcom,sm8650 + + - items: + - enum: + - qcom,x1e80100-crd + - qcom,x1e80100-qcp + - const: qcom,x1e80100 + # Board compatibles go above qcom,msm-id: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 5f7c6c4aad8f..5cf5cbef2cf5 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -30,9 +30,11 @@ properties: - const: amarula,vyasa-rk3288 - const: rockchip,rk3288 - - description: Anbernic RG351M + - description: Anbernic RK3326 Handheld Gaming Console items: - - const: anbernic,rg351m + - enum: + - anbernic,rg351m + - anbernic,rg351v - const: rockchip,rk3326 - description: Anbernic RG353P @@ -95,22 +97,30 @@ properties: - const: chipspark,rayeager-px2 - const: rockchip,rk3066a + - description: Cool Pi Compute Module 5(CM5) EVB + items: + - enum: + - coolpi,pi-cm5-evb + - const: coolpi,pi-cm5 + - const: rockchip,rk3588 + + - description: Cool Pi 4 Model B + items: + - const: coolpi,pi-4b + - const: rockchip,rk3588s + - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards items: - const: edgeble,neural-compute-module-2-io # Edgeble Neural Compute Module 2 IO Board - const: edgeble,neural-compute-module-2 # Edgeble Neural Compute Module 2 SoM - const: rockchip,rv1126 - - description: Edgeble Neural Compute Module 6(Neu6) Model A SoM based boards - items: - - const: edgeble,neural-compute-module-6a-io # Edgeble Neural Compute Module 6A IO Board - - const: edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM - - const: rockchip,rk3588 - - - description: Edgeble Neural Compute Module 6(Neu6) Model B SoM based boards + - description: Edgeble Neural Compute Module 6(Neu6) SoM based boards items: - - const: edgeble,neural-compute-module-6b-io # Edgeble Neural Compute Module 6B IO Board - - const: edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM + - const: edgeble,neural-compute-module-6a-io # Edgeble NCM6A-IO Board + - enum: + - edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM + - edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM - const: rockchip,rk3588 - description: Elgin RV1108 R1 @@ -237,6 +247,11 @@ properties: - const: geekbuying,geekbox - const: rockchip,rk3368 + - description: Geniatech XPI-3128 + items: + - const: geniatech,xpi-3128 + - const: rockchip,rk3128 + - description: Google Bob (Asus Chromebook Flip C101PA) items: - const: google,bob-rev13 @@ -674,9 +689,12 @@ properties: - const: pine64,soquartz - const: rockchip,rk3566 - - description: Powkiddy RGB30 + - description: Powkiddy RK3566 Handheld Gaming Console items: - - const: powkiddy,rgb30 + - enum: + - powkiddy,rgb30 + - powkiddy,rk2023 + - powkiddy,x55 - const: rockchip,rk3566 - description: Radxa Compute Module 3(CM3) @@ -875,6 +893,11 @@ properties: - const: tsd,rk3399-puma-haikou - const: rockchip,rk3399 + - description: Theobroma Systems RK3588-SBC Jaguar + items: + - const: tsd,rk3588-jaguar + - const: rockchip,rk3588 + - description: Tronsmart Orion R68 Meta items: - const: tronsmart,orion-r68-meta @@ -922,6 +945,13 @@ properties: - const: rockchip,rk3568-bpi-r2pro - const: rockchip,rk3568 + - description: Sonoff iHost Smart Home Hub + items: + - const: itead,sonoff-ihost + - enum: + - rockchip,rv1126 + - rockchip,rv1109 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index e3ffd8159ab6..01dcbd8aa703 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -230,6 +230,12 @@ properties: - samsung,exynosautov9-sadk # Samsung Exynos Auto v9 SADK - const: samsung,exynosautov9 + - description: Exynos Auto v920 based boards + items: + - enum: + - samsung,exynosautov920-sadk # Samsung Exynos Auto v920 SADK + - const: samsung,exynosautov920 + required: - compatible diff --git a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml index eaa67b8e0d6c..40fc3c8b9dce 100644 --- a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml +++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml @@ -35,6 +35,11 @@ properties: - sprd,ums512-1h10 - const: sprd,ums512 + - items: + - enum: + - sprd,ums9620-2h10 + - const: sprd,ums9620 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index df087c81c69e..bc2f43330ae4 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -82,29 +82,19 @@ properties: - shiratech,stm32mp157a-iot-box # IoT Box - shiratech,stm32mp157a-stinger96 # Stinger96 - st,stm32mp157c-ed1 + - st,stm32mp157c-ed1-scmi - st,stm32mp157a-dk1 + - st,stm32mp157a-dk1-scmi - st,stm32mp157c-dk2 + - st,stm32mp157c-dk2-scmi - const: st,stm32mp157 - items: - - const: st,stm32mp157a-dk1-scmi - - const: st,stm32mp157a-dk1 - - const: st,stm32mp157 - - items: - - const: st,stm32mp157c-dk2-scmi - - const: st,stm32mp157c-dk2 - - const: st,stm32mp157 - - items: - - const: st,stm32mp157c-ed1-scmi - - const: st,stm32mp157c-ed1 - - const: st,stm32mp157 - - items: - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 - items: - const: st,stm32mp157c-ev1-scmi - - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 11c5ce941dd7..a9d8e85565b8 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -868,6 +868,11 @@ properties: - const: topwise,a721 - const: allwinner,sun4i-a10 + - description: Transpeed 8K618-T + items: + - const: transpeed,8k618-t + - const: allwinner,sun50i-h618 + - description: Utoo P66 items: - const: utoo,p66 @@ -1013,6 +1018,11 @@ properties: - const: xunlong,orangepi-zero2 - const: allwinner,sun50i-h616 + - description: Xunlong OrangePi Zero 2W + items: + - const: xunlong,orangepi-zero2w + - const: allwinner,sun50i-h618 + - description: Xunlong OrangePi Zero 3 items: - const: xunlong,orangepi-zero3 diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 03d2a0d79fb0..c6506bccfe88 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -50,6 +50,7 @@ properties: - enum: - toradex,verdin-am62-nonwifi-dahlia # Verdin AM62 Module on Dahlia - toradex,verdin-am62-nonwifi-dev # Verdin AM62 Module on Verdin Development Board + - toradex,verdin-am62-nonwifi-mallow # Verdin AM62 Module on Mallow - toradex,verdin-am62-nonwifi-yavia # Verdin AM62 Module on Yavia - const: toradex,verdin-am62-nonwifi # Verdin AM62 Module without Wi-Fi / BT - const: toradex,verdin-am62 # Verdin AM62 Module @@ -60,6 +61,7 @@ properties: - enum: - toradex,verdin-am62-wifi-dahlia # Verdin AM62 Wi-Fi / BT Module on Dahlia - toradex,verdin-am62-wifi-dev # Verdin AM62 Wi-Fi / BT M. on Verdin Development B. + - toradex,verdin-am62-wifi-mallow # Verdin AM62 Wi-Fi / BT Module on Mallow - toradex,verdin-am62-wifi-yavia # Verdin AM62 Wi-Fi / BT Module on Yavia - const: toradex,verdin-am62-wifi # Verdin AM62 Wi-Fi / BT Module - const: toradex,verdin-am62 # Verdin AM62 Module diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml index b18fc046390a..93e04a109a12 100644 --- a/Documentation/devicetree/bindings/arm/ti/omap.yaml +++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml @@ -134,6 +134,8 @@ properties: - amazon,omap4-kc1 # Amazon Kindle Fire (first generation) - motorola,droid4 # Motorola Droid 4 XT894 - motorola,droid-bionic # Motorola Droid Bionic XT875 + - motorola,xyboard-mz609 + - motorola,xyboard-mz617 - ti,omap4-panda - ti,omap4-sdp - const: ti,omap4430 diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml index 580f9a97ddf7..b9a9f2cf32a1 100644 --- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml @@ -33,6 +33,8 @@ properties: - qcom,sm8350-llcc - qcom,sm8450-llcc - qcom,sm8550-llcc + - qcom,sm8650-llcc + - qcom,x1e80100-llcc reg: minItems: 2 @@ -104,6 +106,7 @@ allOf: - qcom,qdu1000-llcc - qcom,sc8180x-llcc - qcom,sc8280xp-llcc + - qcom,x1e80100-llcc then: properties: reg: diff --git a/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml b/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml index 8a6a78e1a7ab..7e8cebe21584 100644 --- a/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml +++ b/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml @@ -38,7 +38,9 @@ properties: - sifive,fu740-c000-ccache - const: cache - items: - - const: starfive,jh7110-ccache + - enum: + - starfive,jh7100-ccache + - starfive,jh7110-ccache - const: sifive,ccache0 - const: cache - items: @@ -88,6 +90,7 @@ allOf: contains: enum: - sifive,fu740-c000-ccache + - starfive,jh7100-ccache - starfive,jh7110-ccache - microchip,mpfs-ccache @@ -111,6 +114,7 @@ allOf: contains: enum: - sifive,fu740-c000-ccache + - starfive,jh7100-ccache - starfive,jh7110-ccache then: diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml new file mode 100644 index 000000000000..3eebc03a309b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/google,gs101-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google GS101 SoC clock controller + +maintainers: + - Peter Griffin <peter.griffin@linaro.org> + +description: | + Google GS101 clock controller is comprised of several CMU units, generating + clocks for different domains. Those CMU units are modeled as separate device + tree nodes, and might depend on each other. The root clock in that clock tree + is OSCCLK (24.576 MHz). That external clock must be defined as a fixed-rate + clock in dts. + + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and + dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All clocks available for usage + in clock consumer nodes are defined as preprocessor macros in + 'dt-bindings/clock/gs101.h' header. + +properties: + compatible: + enum: + - google,gs101-cmu-top + - google,gs101-cmu-apm + - google,gs101-cmu-misc + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - google,gs101-cmu-top + - google,gs101-cmu-apm + then: + properties: + clocks: + items: + - description: External reference clock (24.576 MHz) + + clock-names: + items: + - const: oscclk + + - if: + properties: + compatible: + contains: + const: google,gs101-cmu-misc + + then: + properties: + clocks: + items: + - description: Misc bus clock (from CMU_TOP) + - description: Misc sss clock (from CMU_TOP) + + clock-names: + items: + - const: dout_cmu_misc_bus + - const: dout_cmu_misc_sss + +additionalProperties: false + +examples: + # Clock controller node for CMU_TOP + - | + #include <dt-bindings/clock/google,gs101.h> + + cmu_top: clock-controller@1e080000 { + compatible = "google,gs101-cmu-top"; + reg = <0x1e080000 0x8000>; + #clock-cells = <1>; + clocks = <&ext_24_5m>; + clock-names = "oscclk"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/hi3620-clock.txt b/Documentation/devicetree/bindings/clock/hi3620-clock.txt deleted file mode 100644 index dad6269f52c5..000000000000 --- a/Documentation/devicetree/bindings/clock/hi3620-clock.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Hisilicon Hi3620 Clock Controller - -The Hi3620 clock controller generates and supplies clock to various -controllers within the Hi3620 SoC. - -Required Properties: - -- compatible: should be one of the following. - - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC. - - "hisilicon,hi3620-mmc-clock" - controller specific for Hi3620 mmc. - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes use this identifier -to specify the clock which they consume. - -All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>. diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml index d7214d97b2ba..860570320545 100644 --- a/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml +++ b/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml @@ -43,8 +43,6 @@ properties: - mediatek,mt8188-vdecsys - mediatek,mt8188-vdecsys-soc - mediatek,mt8188-vencsys - - mediatek,mt8188-vppsys0 - - mediatek,mt8188-vppsys1 - mediatek,mt8188-wpesys - mediatek,mt8188-wpesys-vpp0 diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml index 52e7831a8d6d..2d44ddc45aab 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml @@ -27,11 +27,15 @@ properties: items: - description: board XO clock - description: sleep clock + - description: Gen3 QMP PCIe PHY PIPE clock + - description: Gen2 QMP PCIe PHY PIPE clock clock-names: items: - const: xo - const: sleep_clk + - const: pcie0_pipe + - const: pcie1_pipe required: - compatible diff --git a/Documentation/devicetree/bindings/crypto/inside-secure,safexcel.yaml b/Documentation/devicetree/bindings/crypto/inside-secure,safexcel.yaml new file mode 100644 index 000000000000..ef07258d16c1 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/inside-secure,safexcel.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Inside Secure SafeXcel cryptographic engine + +maintainers: + - Antoine Tenart <atenart@kernel.org> + +properties: + compatible: + oneOf: + - const: inside-secure,safexcel-eip197b + - const: inside-secure,safexcel-eip197d + - const: inside-secure,safexcel-eip97ies + - const: inside-secure,safexcel-eip197 + description: Equivalent of inside-secure,safexcel-eip197b + deprecated: true + - const: inside-secure,safexcel-eip97 + description: Equivalent of inside-secure,safexcel-eip97ies + deprecated: true + + reg: + maxItems: 1 + + interrupts: + maxItems: 6 + + interrupt-names: + items: + - const: ring0 + - const: ring1 + - const: ring2 + - const: ring3 + - const: eip + - const: mem + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: reg + +required: + - reg + - interrupts + - interrupt-names + +allOf: + - if: + properties: + clocks: + minItems: 2 + then: + properties: + clock-names: + minItems: 2 + required: + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + crypto@800000 { + compatible = "inside-secure,safexcel-eip197b"; + reg = <0x800000 0x200000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ring0", "ring1", "ring2", "ring3", "eip", "mem"; + clocks = <&cpm_syscon0 1 26>; + clock-names = "core"; + }; diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt deleted file mode 100644 index 3bbf144c9988..000000000000 --- a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt +++ /dev/null @@ -1,40 +0,0 @@ -Inside Secure SafeXcel cryptographic engine - -Required properties: -- compatible: Should be "inside-secure,safexcel-eip197b", - "inside-secure,safexcel-eip197d" or - "inside-secure,safexcel-eip97ies". -- reg: Base physical address of the engine and length of memory mapped region. -- interrupts: Interrupt numbers for the rings and engine. -- interrupt-names: Should be "ring0", "ring1", "ring2", "ring3", "eip", "mem". - -Optional properties: -- clocks: Reference to the crypto engine clocks, the second clock is - needed for the Armada 7K/8K SoCs. -- clock-names: mandatory if there is a second clock, in this case the - name must be "core" for the first clock and "reg" for - the second one. - -Backward compatibility: -Two compatibles are kept for backward compatibility, but shouldn't be used for -new submissions: -- "inside-secure,safexcel-eip197" is equivalent to - "inside-secure,safexcel-eip197b". -- "inside-secure,safexcel-eip97" is equivalent to - "inside-secure,safexcel-eip97ies". - -Example: - - crypto: crypto@800000 { - compatible = "inside-secure,safexcel-eip197b"; - reg = <0x800000 0x200000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", - "eip"; - clocks = <&cpm_syscon0 1 26>; - }; diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml index ca4f7d1cefaa..09e43157cc71 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -16,6 +16,7 @@ properties: - qcom,sa8775p-inline-crypto-engine - qcom,sm8450-inline-crypto-engine - qcom,sm8550-inline-crypto-engine + - qcom,sm8650-inline-crypto-engine - const: qcom,inline-crypto-engine reg: diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml index 13070db0f70c..89c88004b41b 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml @@ -21,6 +21,7 @@ properties: - qcom,sc7280-trng - qcom,sm8450-trng - qcom,sm8550-trng + - qcom,sm8650-trng - const: qcom,trng reg: diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml index 8e665d910e6e..a48bd381063a 100644 --- a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml @@ -44,10 +44,12 @@ properties: - items: - enum: + - qcom,sc7280-qce - qcom,sm8250-qce - qcom,sm8350-qce - qcom,sm8450-qce - qcom,sm8550-qce + - qcom,sm8650-qce - const: qcom,sm8150-qce - const: qcom,qce @@ -96,6 +98,7 @@ allOf: - qcom,crypto-v5.4 - qcom,ipq6018-qce - qcom,ipq8074-qce + - qcom,ipq9574-qce - qcom,msm8996-qce - qcom,sdm845-qce then: @@ -129,6 +132,17 @@ allOf: - clocks - clock-names + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8150-qce + then: + properties: + clocks: false + clock-names: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml index 987aa83c2649..df20a3c9c744 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml @@ -9,6 +9,9 @@ title: Analog Devices ADV7533/35 HDMI Encoders maintainers: - Laurent Pinchart <laurent.pinchart@ideasonboard.com> +allOf: + - $ref: /schemas/sound/dai-common.yaml# + description: | The ADV7533 and ADV7535 are HDMI audio and video transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space @@ -89,6 +92,9 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 1, 2, 3, 4 ] + "#sound-dai-cells": + const: 0 + ports: description: The ADV7533/35 has two video ports and one audio port. diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml index f201ae4af4fb..2cef25215798 100644 --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml @@ -55,6 +55,27 @@ properties: - port@0 - port@1 + vcchdmipll-supply: + description: A 1.8V supply that powers the HDMI PLL. + + vcchdmitx-supply: + description: A 1.8V supply that powers the HDMI TX part. + + vcclvdspll-supply: + description: A 1.8V supply that powers the LVDS PLL. + + vcclvdstx-supply: + description: A 1.8V supply that powers the LVDS TX part. + + vccmipirx-supply: + description: A 1.8V supply that powers the MIPI RX part. + + vccsysclk-supply: + description: A 1.8V supply that powers the SYSCLK. + + vdd-supply: + description: A 1.8V supply that powers the digital part. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml index fc11ab5fc465..1c2be8d6f633 100644 --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml @@ -51,7 +51,10 @@ properties: minItems: 1 interrupts: - maxItems: 1 + items: + - description: LCDIF DMA interrupt + - description: LCDIF Error interrupt + minItems: 1 power-domains: maxItems: 1 @@ -131,6 +134,21 @@ allOf: then: required: - power-domains + - if: + properties: + compatible: + contains: + enum: + - fsl,imx23-lcdif + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + else: + properties: + interrupts: + maxItems: 1 examples: - | diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml index 7fd42c8fdc32..b4c28e96dd55 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml @@ -24,6 +24,7 @@ properties: - enum: - mediatek,mt8173-disp-aal - mediatek,mt8183-disp-aal + - mediatek,mt8195-mdp3-aal - items: - enum: - mediatek,mt2712-disp-aal diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml index f21e44092043..b886ca0d89ea 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt2701-disp-color - mediatek,mt8167-disp-color - mediatek,mt8173-disp-color + - mediatek,mt8195-mdp3-color - items: - enum: - mediatek,mt7623-disp-color diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml index 537e5304b730..8611319bed2e 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml @@ -10,7 +10,6 @@ maintainers: - Chun-Kuang Hu <chunkuang.hu@kernel.org> - Philipp Zabel <p.zabel@pengutronix.de> - Jitao Shi <jitao.shi@mediatek.com> - - Xinlei Lee <xinlei.lee@mediatek.com> description: | The MediaTek DSI function block is a sink of the display subsystem and can @@ -35,6 +34,10 @@ properties: - enum: - mediatek,mt6795-dsi - const: mediatek,mt8173-dsi + - items: + - enum: + - mediatek,mt8195-dsi + - const: mediatek,mt8183-dsi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml index 801fa66ae615..677882348ede 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml @@ -23,7 +23,11 @@ description: properties: compatible: - const: mediatek,mt8195-disp-ethdr + oneOf: + - const: mediatek,mt8195-disp-ethdr + - items: + - const: mediatek,mt8188-disp-ethdr + - const: mediatek,mt8195-disp-ethdr reg: maxItems: 7 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml deleted file mode 100644 index dd12e2ff685c..000000000000 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml +++ /dev/null @@ -1,88 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: MediaTek MDP RDMA - -maintainers: - - Chun-Kuang Hu <chunkuang.hu@kernel.org> - - Philipp Zabel <p.zabel@pengutronix.de> - -description: - The MediaTek MDP RDMA stands for Read Direct Memory Access. - It provides real time data to the back-end panel driver, such as DSI, - DPI and DP_INTF. - It contains one line buffer to store the sufficient pixel data. - RDMA device node must be siblings to the central MMSYS_CONFIG node. - For a description of the MMSYS_CONFIG binding, see - Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details. - -properties: - compatible: - const: mediatek,mt8195-vdo1-rdma - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - clocks: - items: - - description: RDMA Clock - - iommus: - maxItems: 1 - - mediatek,gce-client-reg: - description: - The register of display function block to be set by gce. There are 4 arguments, - such as gce node, subsys id, offset and register size. The subsys id that is - mapping to the register of display function blocks is defined in the gce header - include/dt-bindings/gce/<chip>-gce.h of each chips. - $ref: /schemas/types.yaml#/definitions/phandle-array - items: - items: - - description: phandle of GCE - - description: GCE subsys id - - description: register offset - - description: register size - maxItems: 1 - -required: - - compatible - - reg - - power-domains - - clocks - - iommus - - mediatek,gce-client-reg - -additionalProperties: false - -examples: - - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/mt8195-clk.h> - #include <dt-bindings/power/mt8195-power.h> - #include <dt-bindings/gce/mt8195-gce.h> - #include <dt-bindings/memory/mt8195-memory-port.h> - - soc { - #address-cells = <2>; - #size-cells = <2>; - - rdma@1c104000 { - compatible = "mediatek,mt8195-vdo1-rdma"; - reg = <0 0x1c104000 0 0x1000>; - interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>; - power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; - iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>; - mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>; - }; - }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml index eead5cb8636e..dae839279950 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml @@ -24,9 +24,13 @@ properties: - enum: - mediatek,mt8173-disp-merge - mediatek,mt8195-disp-merge + - mediatek,mt8195-mdp3-merge - items: - const: mediatek,mt6795-disp-merge - const: mediatek,mt8173-disp-merge + - items: + - const: mediatek,mt8188-disp-merge + - const: mediatek,mt8195-disp-merge reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml index 3e1069b00b56..c471a181d125 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt8173-disp-ovl - mediatek,mt8183-disp-ovl - mediatek,mt8192-disp-ovl + - mediatek,mt8195-mdp3-ovl - items: - enum: - mediatek,mt7623-disp-ovl diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml new file mode 100644 index 000000000000..be07bbdc54e3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Display Padding + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: + Padding provides ability to add pixels to width and height of a layer with + specified colors. Due to hardware design, Mixer in VDOSYS1 requires + width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled, + we need Padding to deal with odd width. + Please notice that even if the Padding is in bypass mode, settings in + register must be cleared to 0, or undefined behaviors could happen. + +properties: + compatible: + enum: + - mediatek,mt8188-disp-padding + - mediatek,mt8195-mdp3-padding + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Padding's clocks + + mediatek,gce-client-reg: + description: + GCE (Global Command Engine) is a multi-core micro processor that helps + its clients to execute commands without interrupting CPU. This property + describes GCE client's information that is composed by 4 fields. + 1. Phandle of the GCE (there may be several GCE processors) + 2. Sub-system ID defined in the dt-binding like a user ID + (Please refer to include/dt-bindings/gce/<chip>-gce.h) + 3. Offset from base address of the subsys you are at + 4. Size of the register the client needs + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: Phandle of the GCE + - description: Subsys ID defined in the dt-binding + - description: Offset from base address of the subsys + - description: Size of register + maxItems: 1 + +required: + - compatible + - reg + - power-domains + - clocks + - mediatek,gce-client-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mediatek,mt8188-clk.h> + #include <dt-bindings/power/mediatek,mt8188-power.h> + #include <dt-bindings/gce/mt8195-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + padding0: padding@1c11d000 { + compatible = "mediatek,mt8188-disp-padding"; + reg = <0 0x1c11d000 0 0x1000>; + clocks = <&vdosys1 CLK_VDO1_PADDING0>; + power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml index a8a5c9608598..e4affc854f3d 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml @@ -23,6 +23,7 @@ properties: oneOf: - enum: - mediatek,mt8173-disp-split + - mediatek,mt8195-mdp3-split - items: - const: mediatek,mt6795-disp-split - const: mediatek,mt8173-disp-split @@ -38,6 +39,21 @@ properties: the power controller specified by phandle. See Documentation/devicetree/bindings/power/power-domain.yaml for details. + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + clocks: items: - description: SPLIT Clock @@ -48,6 +64,17 @@ required: - power-domains - clocks +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8195-mdp3-split + + then: + required: + - mediatek,gce-client-reg + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index dbe398f84ffb..ae53cbfb2193 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -26,8 +26,10 @@ properties: - qcom,sc8280xp-edp - qcom,sdm845-dp - qcom,sm8350-dp + - qcom,sm8650-dp - items: - enum: + - qcom,sm8150-dp - qcom,sm8250-dp - qcom,sm8450-dp - qcom,sm8550-dp diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index c6dbab65d5f7..4219936eda5a 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -25,6 +25,7 @@ properties: - qcom,sc7180-dsi-ctrl - qcom,sc7280-dsi-ctrl - qcom,sdm660-dsi-ctrl + - qcom,sdm670-dsi-ctrl - qcom,sdm845-dsi-ctrl - qcom,sm6115-dsi-ctrl - qcom,sm6125-dsi-ctrl @@ -35,6 +36,7 @@ properties: - qcom,sm8350-dsi-ctrl - qcom,sm8450-dsi-ctrl - qcom,sm8550-dsi-ctrl + - qcom,sm8650-dsi-ctrl - const: qcom,mdss-dsi-ctrl - enum: - qcom,dsi-ctrl-6g-qcm2290 @@ -333,6 +335,7 @@ allOf: - qcom,sm8350-dsi-ctrl - qcom,sm8450-dsi-ctrl - qcom,sm8550-dsi-ctrl + - qcom,sm8650-dsi-ctrl then: properties: clocks: diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml index dd6619555a12..7e764eac3ef3 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml @@ -22,6 +22,7 @@ properties: - qcom,sm8350-dsi-phy-5nm - qcom,sm8450-dsi-phy-5nm - qcom,sm8550-dsi-phy-4nm + - qcom,sm8650-dsi-phy-4nm reg: items: diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml index f69196e4cc76..c6305a6e0334 100644 --- a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml @@ -61,17 +61,27 @@ properties: ranges: true + # This is not a perfect description, but it's impossible to discern and match + # the entries like we do with interconnect-names interconnects: minItems: 1 items: - description: Interconnect path from mdp0 (or a single mdp) port to the data bus - description: Interconnect path from mdp1 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - minItems: 1 - items: - - const: mdp0-mem - - const: mdp1-mem + oneOf: + - minItems: 1 + items: + - const: mdp0-mem + - const: cpu-cfg + + - minItems: 2 + items: + - const: mdp0-mem + - const: mdp1-mem + - const: cpu-cfg resets: items: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml index 5ad155612b6c..f0cdb5422688 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml @@ -36,10 +36,14 @@ properties: maxItems: 2 interconnects: - maxItems: 1 + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - maxItems: 1 + items: + - const: mdp0-mem + - const: cpu-cfg patternProperties: "^display-controller@[0-9a-f]+$": @@ -56,7 +60,9 @@ patternProperties: properties: compatible: - const: qcom,dsi-ctrl-6g-qcm2290 + items: + - const: qcom,qcm2290-dsi-ctrl + - const: qcom,mdss-dsi-ctrl "^phy@[0-9a-f]+$": type: object @@ -96,8 +102,10 @@ examples: interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; + interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>, + <&bimc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; iommus = <&apps_smmu 0x420 0x2>, <&apps_smmu 0x421 0x0>; @@ -136,7 +144,8 @@ examples: }; dsi@5e94000 { - compatible = "qcom,dsi-ctrl-6g-qcm2290"; + compatible = "qcom,qcm2290-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0x05e94000 0x400>; reg-names = "dsi_ctrl"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml index 3432a2407caa..7a0555b15ddf 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml @@ -36,10 +36,14 @@ properties: maxItems: 1 interconnects: - maxItems: 1 + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - maxItems: 1 + items: + - const: mdp0-mem + - const: cpu-cfg patternProperties: "^display-controller@[0-9a-f]+$": @@ -106,8 +110,10 @@ examples: interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; iommus = <&apps_smmu 0x800 0x2>; ranges; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml index bbb727831fca..2947f27e0585 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml @@ -36,10 +36,14 @@ properties: maxItems: 1 interconnects: - maxItems: 1 + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - maxItems: 1 + items: + - const: mdp0-mem + - const: cpu-cfg patternProperties: "^display-controller@[0-9a-f]+$": @@ -118,8 +122,10 @@ examples: interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &cnoc2 SLAVE_DISPLAY_CFG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; iommus = <&apps_smmu 0x900 0x402>; ranges; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml new file mode 100644 index 000000000000..7dc269322b8e --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml @@ -0,0 +1,292 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sdm670-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM670 Display MDSS + +maintainers: + - Richard Acayan <mailingradian@gmail.com> + +description: + SDM670 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sdm670-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: core + + iommus: + maxItems: 2 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sdm670-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sdm670-dp + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,sdm670-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,dsi-phy-10nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,sdm670-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sdm670-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sdm670-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM670_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM670_CX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM670_CX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96a00 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml index b917064bdf33..dc11fd421a27 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml @@ -13,7 +13,9 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - const: qcom,sdm845-dpu + enum: + - qcom,sdm670-dpu + - qcom,sdm845-dpu reg: items: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml index dde5c2acead5..309de1953c88 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml @@ -29,6 +29,16 @@ properties: iommus: maxItems: 2 + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + patternProperties: "^display-controller@[0-9a-f]+$": type: object diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml index 671c2c2aa896..3deb9dc81c9c 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml @@ -35,10 +35,14 @@ properties: maxItems: 1 interconnects: - maxItems: 2 + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - maxItems: 2 + items: + - const: mdp0-mem + - const: cpu-cfg patternProperties: "^display-controller@[0-9a-f]+$": diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml index e1dcb453762e..c9ba1fae8042 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml @@ -35,10 +35,14 @@ properties: maxItems: 1 interconnects: - maxItems: 2 + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - maxItems: 2 + items: + - const: mdp0-mem + - const: cpu-cfg patternProperties: "^display-controller@[0-9a-f]+$": diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml index b15c3950f09d..8e8a288d318c 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml @@ -35,10 +35,14 @@ properties: maxItems: 1 interconnects: - maxItems: 2 + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - maxItems: 2 + items: + - const: mdp0-mem + - const: cpu-cfg patternProperties: "^display-controller@[0-9a-f]+$": diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml index a2a8be7f64a9..c0d6a4fdff97 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml @@ -69,7 +69,7 @@ patternProperties: properties: compatible: - const: qcom,dsi-phy-7nm + const: qcom,dsi-phy-7nm-8150 unevaluatedProperties: false @@ -247,7 +247,7 @@ examples: }; dsi0_phy: phy@ae94400 { - compatible = "qcom,dsi-phy-7nm"; + compatible = "qcom,dsi-phy-7nm-8150"; reg = <0x0ae94400 0x200>, <0x0ae94600 0x280>, <0x0ae94900 0x260>; @@ -318,7 +318,7 @@ examples: }; dsi1_phy: phy@ae96400 { - compatible = "qcom,dsi-phy-7nm"; + compatible = "qcom,dsi-phy-7nm-8150"; reg = <0x0ae96400 0x200>, <0x0ae96600 0x280>, <0x0ae96900 0x260>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml index 994975909fea..51368cda7b2f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml @@ -52,6 +52,16 @@ patternProperties: compatible: const: qcom,sm8250-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sm8250-dp + - const: qcom,sm8350-dp + "^dsi@[0-9a-f]+$": type: object additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml index 001b26e65301..747a2e9665f4 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml @@ -30,10 +30,10 @@ properties: maxItems: 1 interconnects: - maxItems: 2 + maxItems: 3 interconnect-names: - maxItems: 2 + maxItems: 3 patternProperties: "^display-controller@[0-9a-f]+$": @@ -91,9 +91,12 @@ examples: reg = <0x0ae00000 0x1000>; reg-names = "mdss"; - interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>, - <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>; - interconnect-names = "mdp0-mem", "mdp1-mem"; + interconnects = <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>, + <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml new file mode 100644 index 000000000000..a01d15a03317 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8650 Display DPU + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8650-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi + - description: Display MDSS ahb + - description: Display lut + - description: Display core + - description: Display vsync + + clock-names: + items: + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm8650-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_axi_clk>, + <&dispcc_ahb_clk>, + <&dispcc_mdp_lut_clk>, + <&dispcc_mdp_clk>, + <&dispcc_vsync_clk>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml new file mode 100644 index 000000000000..bd11119dc93d --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml @@ -0,0 +1,328 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8650 Display MDSS + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: + SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm8650-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8650-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8650-dp + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm8650-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8650-dsi-phy-4nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8650-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + resets = <&dispcc_core_bcr>; + + power-domains = <&dispcc_gdsc>; + + clocks = <&gcc_ahb_clk>, + <&gcc_axi_clk>, + <&dispcc_mdp_clk>; + clock-names = "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8650-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_axi_clk>, + <&dispcc_ahb_clk>, + <&dispcc_mdp_lut_clk>, + <&dispcc_mdp_clk>, + <&dispcc_mdp_vsync_clk>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_mdp_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispc_byte_clk>, + <&dispcc_intf_clk>, + <&dispcc_pclk>, + <&dispcc_esc_clk>, + <&dispcc_ahb_clk>, + <&gcc_bus_clk>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc_byte_clk>, + <&dispcc_pclk>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0x0ae95000 0x200>, + <0x0ae95200 0x280>, + <0x0ae95500 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc_iface_clk>, + <&rpmhcc_ref_clk>; + clock-names = "iface", "ref"; + }; + + dsi@ae96000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispc_byte_clk>, + <&dispcc_intf_clk>, + <&dispcc_pclk>, + <&dispcc_esc_clk>, + <&dispcc_ahb_clk>, + <&gcc_bus_clk>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc_byte_clk>, + <&dispcc_pclk>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0x0ae97000 0x200>, + <0x0ae97200 0x280>, + <0x0ae97500 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc_iface_clk>, + <&rpmhcc_ref_clk>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml new file mode 100644 index 000000000000..d13c4bd26de4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/fascontek,fs035vg158.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fascontek FS035VG158 3.5" (640x480 pixels) 24-bit IPS LCD panel + +maintainers: + - John Watts <contact@jookia.org> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: fascontek,fs035vg158 + + spi-3wire: true + +required: + - compatible + - reg + - port + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "fascontek,fs035vg158"; + reg = <0>; + + spi-3wire; + spi-max-frequency = <3125000>; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml index ffb35288ffbb..916bb7f94206 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml @@ -23,6 +23,7 @@ properties: items: - enum: - hannstar,hsd060bhw4 + - powkiddy,x55-panel - const: himax,hx8394 reg: true @@ -31,6 +32,8 @@ properties: backlight: true + rotation: true + port: true vcc-supply: diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml new file mode 100644 index 000000000000..f4f91f93f490 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9805.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9805 based MIPI-DSI panels + +maintainers: + - Michael Trimarchi <michael@amarulasolutions.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - giantplus,gpm1790a0 + - tianma,tm041xdhg01 + - const: ilitek,ili9805 + + avdd-supply: true + dvdd-supply: true + reg: true + +required: + - compatible + - avdd-supply + - dvdd-supply + - reg + - reset-gpios + - port + - backlight + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "giantplus,gpm1790a0", "ilitek,ili9805"; + reg = <0>; + avdd-supply = <&avdd_display>; + dvdd-supply = <&dvdd_display>; + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index e7ab6224b52e..b1e624be3e33 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -16,6 +16,7 @@ properties: compatible: items: - enum: + - ampire,am8001280g - bananapi,lhr050h41 - feixin,k101-im2byl02 - tdo,tl050hdv35 diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml index ebdca5f5a001..7a55961e1a3d 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml @@ -18,16 +18,12 @@ properties: compatible: const: leadtek,ltk035c5444t - backlight: true - port: true - power-supply: true - reg: true - reset-gpios: true - spi-3wire: true required: - compatible + - reg + - port - power-supply - reset-gpios diff --git a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml index cce775a87f87..7a634fbc465e 100644 --- a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml +++ b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml @@ -21,7 +21,7 @@ properties: - enum: - anbernic,rg351v-panel - anbernic,rg353p-panel - - anbernic,rg353v-panel + - powkiddy,rk2023-panel - const: newvision,nv3051d reg: true diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index 73674baea75d..f9160d7bac3c 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -42,6 +42,8 @@ properties: - lg,acx467akm-7 # LG Corporation 7" WXGA TFT LCD panel - lg,ld070wx3-sl01 + # LG Corporation 5" HD TFT LCD panel + - lg,lh500wx1-sd03 # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel - osddisplays,osd101t2587-53ts # Panasonic 10" WUXGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml index a5a596ff8e75..716ece5f3978 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml @@ -33,6 +33,8 @@ properties: # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel - auo,g133han01 + # AU Optronics Corporation 15.6" FHD (1920x1080) TFT LCD panel + - auo,g156han04 # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel - auo,g185han01 # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 3ec9ee95045f..634a10c6f2dd 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -73,6 +73,8 @@ properties: - auo,t215hvn01 # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel - avic,tm070ddh03 + # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel + - boe,bp101wx1-100 # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel - boe,ev121wxm-n10-1850 # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel @@ -144,6 +146,8 @@ properties: - edt,etmv570g2dhu # E Ink VB3300-KCA - eink,vb3300-kca + # Evervision Electronics Co. Ltd. VGG644804 5.7" VGA TFT LCD Panel + - evervision,vgg644804 # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel - evervision,vgg804821 # Foxlink Group 5" WVGA TFT LCD panel @@ -208,8 +212,6 @@ properties: - lemaker,bl035-rgb-002 # LG 7" (800x480 pixels) TFT LCD panel - lg,lb070wv8 - # LG Corporation 5" HD TFT LCD panel - - lg,lh500wx1-sd03 # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel - lg,lp079qx1-sp0v # LG 9.7" (2048x1536 pixels) TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml index 4dc0cd4a6a77..b348f5bf0a98 100644 --- a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml @@ -27,6 +27,7 @@ properties: compatible: items: - enum: + - anbernic,rg-arc-panel - densitron,dmt028vghmcmi-1a - elida,kd50t048a - techstar,ts8550b diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml index b60b90472d42..2531726af306 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml @@ -8,8 +8,8 @@ title: Rockchip SoC display controller (VOP2) description: VOP2 (Video Output Processor v2) is the display controller for the Rockchip - series of SoCs which transfers the image data from a video memory - buffer to an external LCD interface. + series of SoCs which transfers the image data from a video memory buffer to + an external LCD interface. maintainers: - Sandy Huang <hjc@rock-chips.com> @@ -20,6 +20,7 @@ properties: enum: - rockchip,rk3566-vop - rockchip,rk3568-vop + - rockchip,rk3588-vop reg: items: @@ -27,8 +28,8 @@ properties: Must contain one entry corresponding to the base address and length of the register space. - description: - Can optionally contain a second entry corresponding to - the CRTC gamma LUT address. + Can optionally contain a second entry corresponding to the CRTC gamma + LUT address. reg-names: items: @@ -41,45 +42,63 @@ properties: The VOP interrupt is shared by several interrupt sources, such as frame start (VSYNC), line flag and other status interrupts. + # See compatible-specific constraints below. clocks: + minItems: 5 items: - - description: Clock for ddr buffer transfer. - - description: Clock for the ahb bus to R/W the phy regs. + - description: Clock for ddr buffer transfer via axi. + - description: Clock for the ahb bus to R/W the regs. - description: Pixel clock for video port 0. - description: Pixel clock for video port 1. - description: Pixel clock for video port 2. + - description: Pixel clock for video port 3. + - description: Peripheral(vop grf/dsi) clock. clock-names: + minItems: 5 items: - const: aclk - const: hclk - const: dclk_vp0 - const: dclk_vp1 - const: dclk_vp2 + - const: dclk_vp3 + - const: pclk_vop rockchip,grf: $ref: /schemas/types.yaml#/definitions/phandle description: - Phandle to GRF regs used for misc control + Phandle to GRF regs used for control the polarity of dclk/hsync/vsync of DPI, + also used for query vop memory bisr enable status, etc. + + rockchip,vo1-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to VO GRF regs used for control the polarity of dclk/hsync/vsync of hdmi + on rk3588. + + rockchip,vop-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to VOP GRF regs used for control data path between vopr and hdmi/edp. + + rockchip,pmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to PMU GRF used for query vop memory bisr status on rk3588. ports: $ref: /schemas/graph.yaml#/properties/ports - properties: - port@0: + patternProperties: + "^port@[0-3]$": $ref: /schemas/graph.yaml#/properties/port - description: - Output endpoint of VP0 + description: Output endpoint of VP0/1/2/3. - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: - Output endpoint of VP1 + required: + - port@0 - port@2: - $ref: /schemas/graph.yaml#/properties/port - description: - Output endpoint of VP2 + unevaluatedProperties: false iommus: maxItems: 1 @@ -96,6 +115,49 @@ required: - clock-names - ports +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3588-vop + then: + properties: + clocks: + minItems: 7 + clock-names: + minItems: 7 + + ports: + required: + - port@0 + - port@1 + - port@2 + - port@3 + + required: + - rockchip,grf + - rockchip,vo1-grf + - rockchip,vop-grf + - rockchip,pmu + + else: + properties: + rockchip,vo1-grf: false + rockchip,vop-grf: false + rockchip,pmu: false + + clocks: + maxItems: 5 + clock-names: + maxItems: 5 + + ports: + required: + - port@0 + - port@1 + - port@2 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index ae09cd3cbce1..b6767ef0d24d 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -23,6 +23,7 @@ properties: compatible: enum: - ti,am625-dss + - ti,am62a7,dss - ti,am65x-dss reg: @@ -87,6 +88,7 @@ properties: For AM65x DSS, the OLDI output port node from video port 1. For AM625 DSS, the internal DPI output port node from video port 1. + For AM62A7 DSS, the port is tied off inside the SoC. port@1: $ref: /schemas/graph.yaml#/properties/port @@ -108,6 +110,18 @@ properties: Input memory (from main memory to dispc) bandwidth limit in bytes per second +allOf: + - if: + properties: + compatible: + contains: + const: ti,am62a7-dss + then: + properties: + ports: + properties: + port@0: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index 0613a37a851a..47d3d2d52acd 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -63,7 +63,9 @@ properties: - qcom,scm-sm8350 - qcom,scm-sm8450 - qcom,scm-sm8550 + - qcom,scm-sm8650 - qcom,scm-qcs404 + - qcom,scm-x1e80100 - const: qcom,scm clocks: @@ -178,21 +180,6 @@ allOf: minItems: 3 maxItems: 3 - # Interconnects - - if: - not: - properties: - compatible: - contains: - enum: - - qcom,scm-qdu1000 - - qcom,scm-sc8280xp - - qcom,scm-sm8450 - - qcom,scm-sm8550 - then: - properties: - interconnects: false - # Interrupts - if: not: @@ -202,6 +189,7 @@ allOf: enum: - qcom,scm-sm8450 - qcom,scm-sm8550 + - qcom,scm-sm8650 then: properties: interrupts: false diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml index 4a896ff7edc5..a1e71c974e79 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml @@ -72,7 +72,7 @@ required: - reg - gpio-controller - "#gpio-cells" - - "brcm,gpio-bank-widths" + - brcm,gpio-bank-widths additionalProperties: false diff --git a/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml new file mode 100644 index 000000000000..9e32e54aeb24 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/nuvoton,sgpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton SGPIO controller + +maintainers: + - Jim LIU <JJLIU0@nuvoton.com> + +description: | + This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC and detailed + information is in the NPCM7XX/8XX SERIAL I/O EXPANSION INTERFACE section. + Nuvoton NPCM7xx SGPIO module is combines a serial to parallel IC (HC595) + and a parallel to serial IC (HC165). + Clock is a division of the APB3 clock. + This interface has 4 pins (D_out , D_in, S_CLK, LDSH). + NPCM7xx/NPCM8xx have two sgpio modules. Each module can support up + to 64 output pins, and up to 64 input pins, the pin is only for GPI or GPO. + GPIO pins can be programmed to support the following options + - Support interrupt option for each input port and various interrupt + sensitivity options (level-high, level-low, edge-high, edge-low) + - ngpios is number of nuvoton,input-ngpios GPIO lines and nuvoton,output-ngpios GPIO lines. + nuvoton,input-ngpios GPIO lines is only for GPI. + nuvoton,output-ngpios GPIO lines is only for GPO. + +properties: + compatible: + enum: + - nuvoton,npcm750-sgpio + - nuvoton,npcm845-sgpio + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + nuvoton,input-ngpios: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The numbers of GPIO's exposed. GPIO lines are only for GPI. + minimum: 0 + maximum: 64 + + nuvoton,output-ngpios: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The numbers of GPIO's exposed. GPIO lines are only for GPO. + minimum: 0 + maximum: 64 + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - interrupts + - nuvoton,input-ngpios + - nuvoton,output-ngpios + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + gpio8: gpio@101000 { + compatible = "nuvoton,npcm750-sgpio"; + reg = <0x101000 0x200>; + clocks = <&clk NPCM7XX_CLK_APB3>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + nuvoton,input-ngpios = <64>; + nuvoton,output-ngpios = <64>; + }; diff --git a/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml new file mode 100644 index 000000000000..dd768db37a98 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/realtek,rtd-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC GPIO controller + +maintainers: + - Tzuyi Chang <tychang@realtek.com> + +description: + The GPIO controller is designed for the Realtek DHC (Digital Home Center) + RTD series SoC family, which are high-definition media processor SoCs. + +properties: + compatible: + enum: + - realtek,rtd1295-misc-gpio + - realtek,rtd1295-iso-gpio + - realtek,rtd1315e-iso-gpio + - realtek,rtd1319-iso-gpio + - realtek,rtd1319d-iso-gpio + - realtek,rtd1395-iso-gpio + - realtek,rtd1619-iso-gpio + - realtek,rtd1619b-iso-gpio + + reg: + items: + - description: GPIO controller registers + - description: GPIO interrupt registers + + interrupts: + items: + - description: Interrupt number of the assert GPIO interrupt, which is + triggered when there is a rising edge. + - description: Interrupt number of the deassert GPIO interrupt, which is + triggered when there is a falling edge. + + gpio-ranges: true + + gpio-controller: true + + "#gpio-cells": + const: 2 + +required: + - compatible + - reg + - interrupts + - gpio-ranges + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + gpio@100 { + compatible = "realtek,rtd1319d-iso-gpio"; + reg = <0x100 0x100>, + <0x0 0xb0>; + interrupt-parent = <&iso_irq_mux>; + interrupts = <19>, <20>; + gpio-ranges = <&pinctrl 0 0 82>; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml index affd823c881d..d76987ce8e50 100644 --- a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml +++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml @@ -41,6 +41,13 @@ properties: "#interrupt-cells": const: 2 +patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + + required: + - gpio-hog + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml index eefe7b345286..ab2afc0e4153 100644 --- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml @@ -65,6 +65,8 @@ patternProperties: minItems: 1 maxItems: 32 + gpio-ranges: true + ngpios: default: 32 minimum: 1 diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml index 56143f1fe84a..b1fd632718d4 100644 --- a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml +++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml @@ -23,6 +23,8 @@ properties: "#gpio-cells": const: 2 + label: true + required: - compatible - gpio-controller @@ -37,6 +39,7 @@ examples: compatible = "xlnx,zynqmp-gpio-modepin"; gpio-controller; #gpio-cells = <2>; + label = "modepin"; }; }; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index ca02baba5526..0801da33a385 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -42,6 +42,11 @@ properties: - const: arm,mali-t760 - items: - enum: + - samsung,exynos7-mali + - const: samsung,exynos5433-mali + - const: arm,mali-t760 + - items: + - enum: - rockchip,rk3399-mali - const: arm,mali-t860 diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml index 0fae1ef013be..abd4aa335fbc 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml @@ -29,6 +29,7 @@ properties: - allwinner,sun50i-a64-mali - rockchip,rk3036-mali - rockchip,rk3066-mali + - rockchip,rk3128-mali - rockchip,rk3188-mali - rockchip,rk3228-mali - samsung,exynos4210-mali diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml index dae55b8a267b..dc078ceeca9a 100644 --- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml +++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml @@ -17,6 +17,7 @@ properties: compatible: enum: - brcm,2711-v3d + - brcm,2712-v3d - brcm,7268-v3d - brcm,7278-v3d diff --git a/Documentation/devicetree/bindings/gpu/img,powervr.yaml b/Documentation/devicetree/bindings/gpu/img,powervr.yaml new file mode 100644 index 000000000000..a13298f1a182 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/img,powervr.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 Imagination Technologies Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/img,powervr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Imagination Technologies PowerVR and IMG GPU + +maintainers: + - Frank Binns <frank.binns@imgtec.com> + +properties: + compatible: + items: + - enum: + - ti,am62-gpu + - const: img,img-axe # IMG AXE GPU model/revision is fully discoverable + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + items: + - const: core + - const: mem + - const: sys + minItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: ti,am62-gpu + then: + properties: + clocks: + maxItems: 1 + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + gpu@fd00000 { + compatible = "ti,am62-gpu", "img,img-axe"; + reg = <0x0fd00000 0x20000>; + clocks = <&k3_clks 187 0>; + clock-names = "core"; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>; + }; diff --git a/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml index 95cbdcb56efe..780ccb5ee9b4 100644 --- a/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml +++ b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml @@ -11,9 +11,21 @@ maintainers: properties: compatible: - enum: - - samsung,exynos4210-chipid - - samsung,exynos850-chipid + oneOf: + - enum: + - samsung,exynos4210-chipid + - samsung,exynos850-chipid + - items: + - enum: + - samsung,exynos5433-chipid + - samsung,exynos7-chipid + - const: samsung,exynos4210-chipid + - items: + - enum: + - samsung,exynos7885-chipid + - samsung,exynosautov9-chipid + - samsung,exynosautov920-chipid + - const: samsung,exynos850-chipid reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt deleted file mode 100644 index f4cfa350f6a1..000000000000 --- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt +++ /dev/null @@ -1,41 +0,0 @@ -Bindings for fan connected to GPIO lines - -Required properties: -- compatible : "gpio-fan" - -Optional properties: -- gpios: Specifies the pins that map to bits in the control value, - ordered MSB-->LSB. -- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the - control value that should be set to achieve them. This array - must have the RPM values in ascending order. -- alarm-gpios: This pin going active indicates something is wrong with - the fan, and a udev event will be fired. -- #cooling-cells: If used as a cooling device, must be <2> - Also see: - Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml - min and max states are derived from the speed-map of the fan. - -Note: At least one the "gpios" or "alarm-gpios" properties must be set. - -Examples: - - gpio_fan { - compatible = "gpio-fan"; - gpios = <&gpio1 14 1 - &gpio1 13 1>; - gpio-fan,speed-map = <0 0 - 3000 1 - 6000 2>; - alarm-gpios = <&gpio1 15 1>; - }; - gpio_fan_cool: gpio_fan { - compatible = "gpio-fan"; - gpios = <&gpio2 14 1 - &gpio2 13 1>; - gpio-fan,speed-map = <0 0>, - <3000 1>, - <6000 2>; - alarm-gpios = <&gpio2 15 1>; - #cooling-cells = <2>; /* min followed by max */ - }; diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml b/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml new file mode 100644 index 000000000000..7f30cfc87350 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/gpio-fan.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fan connected to GPIO lines + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + compatible: + const: gpio-fan + + gpios: + description: | + Specifies the pins that map to bits in the control value, + ordered MSB-->LSB. + minItems: 1 + maxItems: 7 + + alarm-gpios: + maxItems: 1 + + gpio-fan,speed-map: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 2 + maxItems: 127 + items: + items: + - description: fan speed in RPMs + - description: control value + description: | + A mapping of possible fan RPM speeds and the + control value that should be set to achieve them. This array + must have the RPM values in ascending order. + + '#cooling-cells': + const: 2 + +required: + - compatible + - gpios + - gpio-fan,speed-map + +additionalProperties: false + +examples: + - | + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio2 14 1 + &gpio2 13 1>; + gpio-fan,speed-map = < 0 0>, + <3000 1>, + <6000 2>; + alarm-gpios = <&gpio2 15 1>; + #cooling-cells = <2>; /* min followed by max */ + }; diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml index e5b24782f448..be5c7d4579bb 100644 --- a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml +++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml @@ -19,7 +19,7 @@ properties: io-channels: minItems: 1 - maxItems: 8 # Should be enough + maxItems: 51 # Should be enough description: > List of phandles to ADC channels to read the monitoring values diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml new file mode 100644 index 000000000000..98ca163d3486 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/lltc,ltc4286.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LTC4286 power monitors + +maintainers: + - Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> + +properties: + compatible: + enum: + - lltc,ltc4286 + - lltc,ltc4287 + + reg: + maxItems: 1 + + adi,vrange-low-enable: + description: + This property is a bool parameter to represent the + voltage range is 25.6 volts or 102.4 volts for this chip. + The default is 102.4 volts. + type: boolean + + shunt-resistor-micro-ohms: + description: + Resistor value micro-ohms. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@40 { + compatible = "lltc,ltc4286"; + reg = <0x40>; + adi,vrange-low-enable; + shunt-resistor-micro-ohms = <300>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml index 0b69897f0c63..ed269e428a3d 100644 --- a/Documentation/devicetree/bindings/hwmon/lm75.yaml +++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml @@ -14,6 +14,7 @@ properties: compatible: enum: - adi,adt75 + - ams,as6200 - atmel,at30ts74 - dallas,ds1775 - dallas,ds75 @@ -48,10 +49,28 @@ properties: vs-supply: description: phandle to the regulator that provides the +VS supply + interrupts: + maxItems: 1 + required: - compatible - reg +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - ams,as6200 + - ti,tmp100 + - ti,tmp101 + - ti,tmp112 + then: + properties: + interrupts: false + additionalProperties: false examples: @@ -66,3 +85,17 @@ examples: vs-supply = <&vs>; }; }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@48 { + compatible = "ams,as6200"; + reg = <0x48>; + vs-supply = <&vs>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_EDGE_BOTH>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml index 3e52a0db6c41..df9c57bca2a8 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml @@ -25,7 +25,16 @@ properties: - samsung,exynos5250-hsi2c # Exynos5250 and Exynos5420 - samsung,exynos5260-hsi2c # Exynos5260 - samsung,exynos7-hsi2c # Exynos7 - - samsung,exynosautov9-hsi2c # ExynosAutoV9 and Exynos850 + - samsung,exynosautov9-hsi2c + - items: + - enum: + - samsung,exynos5433-hsi2c + - tesla,fsd-hsi2c + - const: samsung,exynos7-hsi2c + - items: + - enum: + - samsung,exynos850-hsi2c + - const: samsung,exynosautov9-hsi2c - const: samsung,exynos5-hsi2c # Exynos5250 and Exynos5420 deprecated: true diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml index b204e35e4f8d..1303502cf265 100644 --- a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml @@ -11,14 +11,20 @@ maintainers: properties: compatible: - enum: - - samsung,s3c2410-i2c - - samsung,s3c2440-i2c - # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs: - - samsung,s3c2440-hdmiphy-i2c - # For s3c2440-like I2C used as a host to SATA PHY controller on an - # internal bus: - - samsung,exynos5-sata-phy-i2c + oneOf: + - enum: + - samsung,s3c2410-i2c + - samsung,s3c2440-i2c + # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs: + - samsung,s3c2440-hdmiphy-i2c + # For s3c2440-like I2C used as a host to SATA PHY controller on an + # internal bus: + - samsung,exynos5-sata-phy-i2c + - items: + - enum: + - samsung,exynos7885-i2c + - samsung,exynos850-i2c + - const: samsung,s3c2440-i2c '#address-cells': const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml index 582d0a03b814..4e40f6bed5db 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -11,18 +11,23 @@ maintainers: properties: compatible: - enum: - - samsung,exynos-adc-v1 # Exynos5250 - - samsung,exynos-adc-v2 - - samsung,exynos3250-adc - - samsung,exynos4212-adc # Exynos4212 and Exynos4412 - - samsung,exynos7-adc - - samsung,s3c2410-adc - - samsung,s3c2416-adc - - samsung,s3c2440-adc - - samsung,s3c2443-adc - - samsung,s3c6410-adc - - samsung,s5pv210-adc + oneOf: + - enum: + - samsung,exynos-adc-v1 # Exynos5250 + - samsung,exynos-adc-v2 + - samsung,exynos3250-adc + - samsung,exynos4212-adc # Exynos4212 and Exynos4412 + - samsung,exynos7-adc + - samsung,s3c2410-adc + - samsung,s3c2416-adc + - samsung,s3c2440-adc + - samsung,s3c2443-adc + - samsung,s3c6410-adc + - samsung,s5pv210-adc + - items: + - enum: + - samsung,exynos5433-adc + - const: samsung,exynos7-adc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm6115.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm6115.yaml new file mode 100644 index 000000000000..14b1a0b08e73 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm6115.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sm6115.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6115 Network-On-Chip interconnect + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: + The Qualcomm SM6115 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. + +properties: + compatible: + enum: + - qcom,sm6115-bimc + - qcom,sm6115-cnoc + - qcom,sm6115-snoc + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + +# Child node's properties +patternProperties: + '^interconnect-[a-z0-9]+$': + type: object + description: + The interconnect providers do not have a separate QoS register space, + but share parent's space. + + $ref: qcom,rpm-common.yaml# + + properties: + compatible: + enum: + - qcom,sm6115-clk-virt + - qcom,sm6115-mmrt-virt + - qcom,sm6115-mmnrt-virt + + required: + - compatible + + unevaluatedProperties: false + +required: + - compatible + - reg + +allOf: + - $ref: qcom,rpm-common.yaml# + - if: + properties: + compatible: + const: qcom,sm6115-cnoc + + then: + properties: + clocks: + items: + - description: USB-NoC AXI clock + + clock-names: + items: + - const: usb_axi + + - if: + properties: + compatible: + const: qcom,sm6115-snoc + + then: + properties: + clocks: + items: + - description: CPU-NoC AXI clock. + - description: UFS-NoC AXI clock. + - description: USB-NoC AXI clock. + - description: IPA clock. + + clock-names: + items: + - const: cpu_axi + - const: ufs_axi + - const: usb_axi + - const: ipa + + - if: + properties: + compatible: + enum: + - qcom,sm6115-bimc + - qcom,sm6115-clk-virt + - qcom,sm6115-mmrt-virt + - qcom,sm6115-mmnrt-virt + + then: + properties: + clocks: false + clock-names: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm6115.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + + snoc: interconnect@1880000 { + compatible = "qcom,sm6115-snoc"; + reg = <0x01880000 0x60200>; + clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&rpmcc RPM_SMD_IPA_CLK>; + clock-names = "cpu_axi", + "ufs_axi", + "usb_axi", + "ipa"; + #interconnect-cells = <1>; + + qup_virt: interconnect-clk { + compatible = "qcom,sm6115-clk-virt"; + #interconnect-cells = <1>; + }; + + mmnrt_virt: interconnect-mmnrt { + compatible = "qcom,sm6115-mmnrt-virt"; + #interconnect-cells = <1>; + }; + + mmrt_virt: interconnect-mmrt { + compatible = "qcom,sm6115-mmrt-virt"; + #interconnect-cells = <1>; + }; + }; + + cnoc: interconnect@1900000 { + compatible = "qcom,sm6115-cnoc"; + reg = <0x01900000 0x8200>; + #interconnect-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml new file mode 100644 index 000000000000..f9322de7cd61 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sm8650-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on SM8650 + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + + See also:: include/dt-bindings/interconnect/qcom,sm8650-rpmh.h + +properties: + compatible: + enum: + - qcom,sm8650-aggre1-noc + - qcom,sm8650-aggre2-noc + - qcom,sm8650-clk-virt + - qcom,sm8650-cnoc-main + - qcom,sm8650-config-noc + - qcom,sm8650-gem-noc + - qcom,sm8650-lpass-ag-noc + - qcom,sm8650-lpass-lpiaon-noc + - qcom,sm8650-lpass-lpicx-noc + - qcom,sm8650-mc-virt + - qcom,sm8650-mmss-noc + - qcom,sm8650-nsp-noc + - qcom,sm8650-pcie-anoc + - qcom,sm8650-system-noc + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + +required: + - compatible + +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8650-clk-virt + - qcom,sm8650-mc-virt + then: + properties: + reg: false + else: + required: + - reg + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8650-pcie-anoc + then: + properties: + clocks: + items: + - description: aggre-NOC PCIe AXI clock + - description: cfg-NOC PCIe a-NOC AHB clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8650-aggre1-noc + then: + properties: + clocks: + items: + - description: aggre UFS PHY AXI clock + - description: aggre USB3 PRIM AXI clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8650-aggre2-noc + then: + properties: + clocks: + items: + - description: RPMH CC IPA clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8650-aggre1-noc + - qcom,sm8650-aggre2-noc + - qcom,sm8650-pcie-anoc + then: + required: + - clocks + else: + properties: + clocks: false + +unevaluatedProperties: false + +examples: + - | + clk_virt: interconnect-0 { + compatible = "qcom,sm8650-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8650-aggre1-noc"; + reg = <0x016e0000 0x14400>; + #interconnect-cells = <2>; + clocks = <&gcc_phy_axi_clk>, <&gcc_prim_axi_clk>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml new file mode 100644 index 000000000000..08b0210e0e59 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,x1e80100-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on X1E80100 + +maintainers: + - Rajendra Nayak <quic_rjendra@quicinc.com> + - Abel Vesa <abel.vesa@linaro.org> + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + + See also:: include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h + +properties: + compatible: + enum: + - qcom,x1e80100-aggre1-noc + - qcom,x1e80100-aggre2-noc + - qcom,x1e80100-clk-virt + - qcom,x1e80100-cnoc-cfg + - qcom,x1e80100-cnoc-main + - qcom,x1e80100-gem-noc + - qcom,x1e80100-lpass-ag-noc + - qcom,x1e80100-lpass-lpiaon-noc + - qcom,x1e80100-lpass-lpicx-noc + - qcom,x1e80100-mc-virt + - qcom,x1e80100-mmss-noc + - qcom,x1e80100-nsp-noc + - qcom,x1e80100-pcie-center-anoc + - qcom,x1e80100-pcie-north-anoc + - qcom,x1e80100-pcie-south-anoc + - qcom,x1e80100-system-noc + - qcom,x1e80100-usb-center-anoc + - qcom,x1e80100-usb-north-anoc + - qcom,x1e80100-usb-south-anoc + + reg: + maxItems: 1 + +required: + - compatible + +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,x1e80100-clk-virt + - qcom,x1e80100-mc-virt + then: + properties: + reg: false + else: + required: + - reg + +unevaluatedProperties: false + +examples: + - | + clk_virt: interconnect-0 { + compatible = "qcom,x1e80100-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,x1e80100-aggre1-noc"; + reg = <0x016e0000 0x14400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml index 509d20c091af..ebb40c48950a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml @@ -29,6 +29,12 @@ properties: maxItems: 1 description: Specifies the base address and size of vMPM registers in RPM MSG RAM. + deprecated: true + + qcom,rpm-msg-ram: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the APSS MPM slice of the RPM Message RAM interrupts: maxItems: 1 @@ -62,35 +68,51 @@ properties: - description: MPM pin number - description: GIC SPI number for the MPM pin + '#power-domain-cells': + const: 0 + required: - compatible - - reg - interrupts - mboxes - interrupt-controller - '#interrupt-cells' - qcom,mpm-pin-count - qcom,mpm-pin-map + - qcom,rpm-msg-ram additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - mpm: interrupt-controller@45f01b8 { - compatible = "qcom,mpm"; - interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - reg = <0x45f01b8 0x1000>; - mboxes = <&apcs_glb 1>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&intc>; - qcom,mpm-pin-count = <96>; - qcom,mpm-pin-map = <2 275>, - <5 296>, - <12 422>, - <24 79>, - <86 183>, - <90 260>, - <91 260>; + + remoteproc-rpm { + compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc"; + + glink-edge { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + }; + + mpm: interrupt-controller { + compatible = "qcom,mpm"; + qcom,rpm-msg-ram = <&apss_mpm>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 1>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + qcom,mpm-pin-count = <96>; + qcom,mpm-pin-map = <2 275>, + <5 296>, + <12 422>, + <24 79>, + <86 183>, + <91 260>; + #power-domain-cells = <0>; + }; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml index 2ef3081eaaf3..d3b5aec0a3f7 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml @@ -26,6 +26,7 @@ properties: - renesas,r9a07g043u-irqc # RZ/G2UL - renesas,r9a07g044-irqc # RZ/G2{L,LC} - renesas,r9a07g054-irqc # RZ/V2L + - renesas,r9a08g045-irqc # RZ/G3S - const: renesas,rzg2l-irqc '#interrupt-cells': @@ -167,7 +168,9 @@ allOf: properties: compatible: contains: - const: renesas,r9a07g043u-irqc + enum: + - renesas,r9a07g043u-irqc + - renesas,r9a08g045-irqc then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index 0c07e8dda445..709b2211276b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -66,6 +66,7 @@ properties: - enum: - allwinner,sun20i-d1-plic - sophgo,cv1800b-plic + - sophgo,cv1812h-plic - sophgo,sg2042-plic - thead,th1520-plic - const: thead,c900-plic diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml new file mode 100644 index 000000000000..03f31b009085 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-fg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 Film Grain + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + Film Grain (FG) is a Media Data Path 3 (MDP3) component used to add + the film grain according to the AOMedia Video 1 (AV1) standard. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-fg + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14002000 { + compatible = "mediatek,mt8195-mdp3-fg"; + reg = <0x14002000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_FG>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml new file mode 100644 index 000000000000..d4609bba6578 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-hdr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 HDR + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + A Media Data Path 3 (MDP3) component used to perform conversion from + High Dynamic Range (HDR) to Standard Dynamic Range (SDR). + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-hdr + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14004000 { + compatible = "mediatek,mt8195-mdp3-hdr"; + reg = <0x14004000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_HDR>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml index 7032c7e15039..59db8306485b 100644 --- a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml @@ -20,8 +20,14 @@ description: | properties: compatible: - items: - - const: mediatek,mt8183-mdp3-rdma + oneOf: + - enum: + - mediatek,mt8183-mdp3-rdma + - mediatek,mt8195-mdp3-rdma + - mediatek,mt8195-vdo1-rdma + - items: + - const: mediatek,mt8188-vdo1-rdma + - const: mediatek,mt8195-vdo1-rdma reg: maxItems: 1 @@ -45,6 +51,14 @@ properties: include/dt-bindings/gce/<chip>-gce.h of each chips. $ref: /schemas/types.yaml#/definitions/uint32-array + mediatek,scp: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the System Control Processor (SCP) used for initializing + and stopping the MDP3, for sending frame data locations to the MDP3's + VPU and to install Inter-Processor Interrupt handlers to control + processing states. + power-domains: maxItems: 1 @@ -52,6 +66,7 @@ properties: items: - description: RDMA clock - description: RSZ clock + minItems: 1 iommus: maxItems: 1 @@ -60,16 +75,72 @@ properties: items: - description: used for 1st data pipe from RDMA - description: used for 2nd data pipe from RDMA + - description: used for 3rd data pipe from RDMA + - description: used for 4th data pipe from RDMA + - description: used for the data pipe from SPLIT + minItems: 1 + + interrupts: + maxItems: 1 + + '#dma-cells': + const: 1 required: - compatible - reg - mediatek,gce-client-reg - - mediatek,gce-events - power-domains - clocks - iommus - - mboxes + - '#dma-cells' + +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8183-mdp3-rdma + + then: + properties: + clocks: + minItems: 2 + + mboxes: + minItems: 2 + + required: + - mboxes + - mediatek,gce-events + + - if: + properties: + compatible: + contains: + const: mediatek,mt8195-mdp3-rdma + + then: + properties: + clocks: + maxItems: 1 + + mboxes: + minItems: 5 + + required: + - mediatek,gce-events + + - if: + properties: + compatible: + contains: + const: mediatek,mt8195-vdo1-rdma + + then: + properties: + clocks: + maxItems: 1 additionalProperties: false @@ -80,16 +151,17 @@ examples: #include <dt-bindings/power/mt8183-power.h> #include <dt-bindings/memory/mt8183-larb-port.h> - mdp3_rdma0: mdp3-rdma0@14001000 { - compatible = "mediatek,mt8183-mdp3-rdma"; - reg = <0x14001000 0x1000>; - mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>; - mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>, - <CMDQ_EVENT_MDP_RDMA0_EOF>; - power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; - clocks = <&mmsys CLK_MM_MDP_RDMA0>, - <&mmsys CLK_MM_MDP_RSZ1>; - iommus = <&iommu>; - mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>, - <&gce 21 CMDQ_THR_PRIO_LOWEST>; + dma-controller@14001000 { + compatible = "mediatek,mt8183-mdp3-rdma"; + reg = <0x14001000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>, + <CMDQ_EVENT_MDP_RDMA0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MDP_RSZ1>; + iommus = <&iommu>; + mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>, + <&gce 21 CMDQ_THR_PRIO_LOWEST>; + #dma-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml index 78f9de6192ef..f5676bec4326 100644 --- a/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml @@ -15,9 +15,13 @@ description: | properties: compatible: - items: + oneOf: - enum: - mediatek,mt8183-mdp3-rsz + - items: + - enum: + - mediatek,mt8195-mdp3-rsz + - const: mediatek,mt8183-mdp3-rsz reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml new file mode 100644 index 000000000000..d815bea29154 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-stitch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 STITCH + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + One of Media Data Path 3 (MDP3) components used to combine multiple video frame + with overlapping fields of view to produce a segmented panorame. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-stitch + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14003000 { + compatible = "mediatek,mt8195-mdp3-stitch"; + reg = <0x14003000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_STITCH>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml new file mode 100644 index 000000000000..14ea556d4f82 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-tcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 Tone Curve Conversion + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +description: + Tone Curve Conversion (TCC) is one of Media Profile Path 3 (MDP3) components. + It is used to handle the tone mapping of various gamma curves in order to + achieve HDR10 effects. This helps adapt the content to the color and + brightness range that standard display devices typically support. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-tcc + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@1400b000 { + compatible = "mediatek,mt8195-mdp3-tcc"; + reg = <0x1400b000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_TCC>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml new file mode 100644 index 000000000000..8ab7f2d8e148 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-tdshp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 Two-Dimensional Sharpness + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + Two-Dimensional Sharpness (TDSHP) is a Media Profile Path 3 (MDP3) component + used to perform image edge sharpening and enhance vividness and contrast. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-tdshp + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14007000 { + compatible = "mediatek,mt8195-mdp3-tdshp"; + reg = <0x14007000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml index 0baa77198fa2..53a679338402 100644 --- a/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml @@ -15,9 +15,13 @@ description: | properties: compatible: - items: + oneOf: - enum: - mediatek,mt8183-mdp3-wrot + - items: + - enum: + - mediatek,mt8195-mdp3-wrot + - const: mediatek,mt8183-mdp3-wrot reg: maxItems: 1 @@ -50,6 +54,9 @@ properties: iommus: maxItems: 1 + '#dma-cells': + const: 1 + required: - compatible - reg @@ -58,6 +65,7 @@ required: - power-domains - clocks - iommus + - '#dma-cells' additionalProperties: false @@ -68,13 +76,14 @@ examples: #include <dt-bindings/power/mt8183-power.h> #include <dt-bindings/memory/mt8183-larb-port.h> - mdp3_wrot0: mdp3-wrot0@14005000 { - compatible = "mediatek,mt8183-mdp3-wrot"; - reg = <0x14005000 0x1000>; - mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; - mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>, - <CMDQ_EVENT_MDP_WROT0_EOF>; - power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; - clocks = <&mmsys CLK_MM_MDP_WROT0>; - iommus = <&iommu>; + dma-controller@14005000 { + compatible = "mediatek,mt8183-mdp3-wrot"; + reg = <0x14005000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>, + <CMDQ_EVENT_MDP_WROT0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + iommus = <&iommu>; + #dma-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml index b97b06848729..f154103f32cc 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml @@ -85,7 +85,7 @@ examples: }; i2s@11440000 { - compatible = "samsung,exynos7-i2s"; + compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; dmas = <&adma 0>, <&adma 2>; dma-names = "tx", "rx"; diff --git a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml index 6ee78a38bd74..5fe65795f796 100644 --- a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml @@ -14,15 +14,22 @@ maintainers: properties: compatible: - enum: - - samsung,exynos4210-dw-mshc - - samsung,exynos4412-dw-mshc - - samsung,exynos5250-dw-mshc - - samsung,exynos5420-dw-mshc - - samsung,exynos5420-dw-mshc-smu - - samsung,exynos7-dw-mshc - - samsung,exynos7-dw-mshc-smu - - axis,artpec8-dw-mshc + oneOf: + - enum: + - axis,artpec8-dw-mshc + - samsung,exynos4210-dw-mshc + - samsung,exynos4412-dw-mshc + - samsung,exynos5250-dw-mshc + - samsung,exynos5420-dw-mshc + - samsung,exynos5420-dw-mshc-smu + - samsung,exynos7-dw-mshc + - samsung,exynos7-dw-mshc-smu + - items: + - enum: + - samsung,exynos5433-dw-mshc-smu + - samsung,exynos7885-dw-mshc-smu + - samsung,exynos850-dw-mshc-smu + - const: samsung,exynos7-dw-mshc-smu reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml b/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml index 3c56efe48efd..327fa872c001 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: U-Boot bootloader partition description: | - U-Boot is a bootlodaer commonly used in embedded devices. It's almost always + U-Boot is a bootloader commonly used in embedded devices. It's almost always located on some kind of flash device. Device configuration is stored as a set of environment variables that are diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index 6107189d276a..2abd036578d1 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -46,4 +46,10 @@ $defs: $ref: dsa-port.yaml# unevaluatedProperties: false +oneOf: + - required: + - ports + - required: + - ethernet-ports + ... diff --git a/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml new file mode 100644 index 000000000000..4f1adf00431a --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6060.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MV88E6060 DSA switch + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: + The Marvell MV88E6060 switch has been produced and sold by Marvell + since at least 2008. The switch has one pin ADDR4 that controls the + MDIO address of the switch to be 0x10 or 0x00, and on the MDIO bus + connected to the switch, the PHYs inside the switch appear as + independent devices on address 0x00-0x04 or 0x10-0x14, so in difference + from many other DSA switches this switch does not have an internal + MDIO bus for the PHY devices. + +properties: + compatible: + const: marvell,mv88e6060 + description: + The MV88E6060 is the oldest Marvell DSA switch product, and + as such a bit limited in features compared to later hardware. + + reg: + maxItems: 1 + + reset-gpios: + description: + GPIO to be used to reset the whole device + maxItems: 1 + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@16 { + compatible = "marvell,mv88e6060"; + reg = <16>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan1"; + }; + ethernet-port@1 { + reg = <1>; + label = "lan2"; + }; + ethernet-port@2 { + reg = <2>; + label = "lan3"; + }; + ethernet-port@3 { + reg = <3>; + label = "lan4"; + }; + ethernet-port@5 { + reg = <5>; + phy-mode = "rev-mii"; + ethernet = <ðc>; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml new file mode 100644 index 000000000000..19f15bdd1c97 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml @@ -0,0 +1,337 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MV88E6xxx DSA switch family + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: + The Marvell MV88E6xxx switch series has been produced and sold + by Marvell since at least 2008. The switch has a few compatibles which + just indicate the base address of the switch, then operating systems + can investigate switch ID registers to find out which actual version + of the switch it is dealing with. + +properties: + compatible: + oneOf: + - enum: + - marvell,mv88e6085 + - marvell,mv88e6190 + - marvell,mv88e6250 + description: | + marvell,mv88e6085: This switch uses base address 0x10. + This switch and its siblings will be autodetected from + ID registers found in the switch, so only "marvell,mv88e6085" should be + specified. This includes the following list of MV88Exxxx switches: + 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, 6171, 6172, 6175, 6176, + 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 + marvell,mv88e6190: This switch uses base address 0x00. + This switch and its siblings will be autodetected from + ID registers found in the switch, so only "marvell,mv88e6190" should be + specified. This includes the following list of MV88Exxxx switches: + 6190, 6190X, 6191, 6290, 6361, 6390, 6390X + marvell,mv88e6250: This switch uses base address 0x08 or 0x18. + This switch and its siblings will be autodetected from + ID registers found in the switch, so only "marvell,mv88e6250" should be + specified. This includes the following list of MV88Exxxx switches: + 6220, 6250 + - items: + - const: marvell,turris-mox-mv88e6085 + - const: marvell,mv88e6085 + - items: + - const: marvell,turris-mox-mv88e6190 + - const: marvell,mv88e6190 + + reg: + maxItems: 1 + + eeprom-length: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Set to the length of an EEPROM connected to the switch. Must be + set if the switch can not detect the presence and/or size of a connected + EEPROM, otherwise optional. + + reset-gpios: + description: + GPIO to be used to reset the whole device + maxItems: 1 + + interrupts: + description: The switch provides an external interrupt line, but it is + not always used by target systems. + maxItems: 1 + + interrupt-controller: + description: The switch has an internal interrupt controller used by + the different sub-blocks. + + '#interrupt-cells': + description: The internal interrupt controller only supports triggering + on active high level interrupts so the second cell must alway be set to + IRQ_TYPE_LEVEL_HIGH. + const: 2 + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + description: Marvell MV88E6xxx switches have an varying combination of + internal and external MDIO buses, in some cases a combined bus that + can be used both internally and externally. This node is for the + primary bus, used internally and sometimes also externally. + + mdio-external: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + description: Marvell MV88E6xxx switches that have a separate external + MDIO bus use this port to access external components on the MDIO bus. + + properties: + compatible: + const: marvell,mv88e6xxx-mdio-external + + required: + - compatible + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + sw_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + sw_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + sw_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan4"; + phy-handle = <&sw_phy0>; + phy-mode = "internal"; + }; + + ethernet-port@1 { + reg = <1>; + label = "lan3"; + phy-handle = <&sw_phy1>; + phy-mode = "internal"; + }; + + ethernet-port@2 { + reg = <2>; + label = "lan2"; + phy-handle = <&sw_phy2>; + phy-mode = "internal"; + }; + + ethernet-port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&sw_phy3>; + phy-mode = "internal"; + }; + + ethernet-port@5 { + reg = <5>; + ethernet = <&fec>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@0 { + compatible = "marvell,mv88e6190"; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&switch_interrupt_pins>; + pinctrl-names = "default"; + reg = <0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + switch0phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + switch0phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + switch0phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + switch0phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + switch0phy6: ethernet-phy@6 { + reg = <0x6>; + }; + + switch0phy7: ethernet-phy@7 { + reg = <0x7>; + }; + + switch0phy8: ethernet-phy@8 { + reg = <0x8>; + }; + }; + + mdio-external { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@b { + reg = <0xb>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + phy2: ethernet-phy@c { + reg = <0xc>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + ethernet = <ð0>; + phy-mode = "rgmii"; + reg = <0>; + + fixed-link { + full-duplex; + pause; + speed = <1000>; + }; + }; + + ethernet-port@1 { + label = "lan1"; + phy-handle = <&switch0phy1>; + reg = <1>; + }; + + ethernet-port@2 { + label = "lan2"; + phy-handle = <&switch0phy2>; + reg = <2>; + }; + + ethernet-port@3 { + label = "lan3"; + phy-handle = <&switch0phy3>; + reg = <3>; + }; + + ethernet-port@4 { + label = "lan4"; + phy-handle = <&switch0phy4>; + reg = <4>; + }; + + ethernet-port@5 { + label = "lan5"; + phy-handle = <&switch0phy5>; + reg = <5>; + }; + + ethernet-port@6 { + label = "lan6"; + phy-handle = <&switch0phy6>; + reg = <6>; + }; + + ethernet-port@7 { + label = "lan7"; + phy-handle = <&switch0phy7>; + reg = <7>; + }; + + ethernet-port@8 { + label = "lan8"; + phy-handle = <&switch0phy8>; + reg = <8>; + }; + + ethernet-port@9 { + /* 88X3310P external phy */ + label = "lan9"; + phy-handle = <&phy1>; + phy-mode = "xaui"; + reg = <9>; + }; + + ethernet-port@a { + /* 88X3310P external phy */ + label = "lan10"; + phy-handle = <&phy2>; + phy-mode = "xaui"; + reg = <0xa>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt deleted file mode 100644 index 6ec0c181b6db..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ /dev/null @@ -1,109 +0,0 @@ -Marvell DSA Switch Device Tree Bindings ---------------------------------------- - -WARNING: This binding is currently unstable. Do not program it into a -FLASH never to be changed again. Once this binding is stable, this -warning will be removed. - -If you need a stable binding, use the old dsa.txt binding. - -Marvell Switches are MDIO devices. The following properties should be -placed as a child node of an mdio device. - -The properties described here are those specific to Marvell devices. -Additional required and optional properties can be found in dsa.txt. - -The compatibility string is used only to find an identification register, -which is at a different MDIO base address in different switch families. -- "marvell,mv88e6085" : Switch has base address 0x10. Use with models: - 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, - 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, - 6341, 6350, 6351, 6352 -- "marvell,mv88e6190" : Switch has base address 0x00. Use with models: - 6190, 6190X, 6191, 6290, 6361, 6390, 6390X -- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: - 6220, 6250 - -Required properties: -- compatible : Should be one of "marvell,mv88e6085", - "marvell,mv88e6190" or "marvell,mv88e6250" as - indicated above -- reg : Address on the MII bus for the switch. - -Optional properties: - -- reset-gpios : Should be a gpio specifier for a reset line -- interrupts : Interrupt from the switch -- interrupt-controller : Indicates the switch is itself an interrupt - controller. This is used for the PHY interrupts. -#interrupt-cells = <2> : Controller uses two cells, number and flag -- eeprom-length : Set to the length of an EEPROM connected to the - switch. Must be set if the switch can not detect - the presence and/or size of a connected EEPROM, - otherwise optional. -- mdio : Container of PHY and devices on the switches MDIO - bus. -- mdio? : Container of PHYs and devices on the external MDIO - bus. The node must contains a compatible string of - "marvell,mv88e6xxx-mdio-external" - -Example: - - mdio { - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - switch0: switch@0 { - compatible = "marvell,mv88e6085"; - reg = <0>; - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - switch0: switch@0 { - compatible = "marvell,mv88e6190"; - reg = <0>; - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - mdio1 { - compatible = "marvell,mv88e6xxx-mdio-external"; - #address-cells = <1>; - #size-cells = <0>; - switch1phy9: switch1phy0@9 { - reg = <9>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index b3029c64d0d5..c963dc09e8e1 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -11,7 +11,6 @@ maintainers: - Woojung Huh <Woojung.Huh@microchip.com> allOf: - - $ref: dsa.yaml#/$defs/ethernet-ports - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: @@ -78,6 +77,39 @@ required: - compatible - reg +if: + not: + properties: + compatible: + enum: + - microchip,ksz8863 + - microchip,ksz8873 +then: + $ref: dsa.yaml#/$defs/ethernet-ports +else: + patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-2]$": + $ref: dsa-port.yaml# + unevaluatedProperties: false + properties: + microchip,rmii-clk-internal: + $ref: /schemas/types.yaml#/definitions/flag + description: + When ksz88x3 is acting as clock provier (via REFCLKO) it + can select between internal and external RMII reference + clock. Internal reference clock means that the clock for + the RMII of ksz88x3 is provided by the ksz88x3 internally + and the REFCLKI pin is unconnected. For the external + reference clock, the clock needs to be fed back to ksz88x3 + via REFCLKI. + If microchip,rmii-clk-internal is set, ksz88x3 will provide + rmii reference clock internally, otherwise reference clock + should be provided externally. + dependencies: + microchip,rmii-clk-internal: [ethernet] + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 9f6a5ccbcefe..d14d123ad7a0 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -275,12 +275,12 @@ allOf: properties: rx-internal-delay-ps: description: - RGMII Receive Clock Delay defined in pico seconds.This is used for + RGMII Receive Clock Delay defined in pico seconds. This is used for controllers that have configurable RX internal delays. If this property is present then the MAC applies the RX delay. tx-internal-delay-ps: description: - RGMII Transmit Clock Delay defined in pico seconds.This is used for + RGMII Transmit Clock Delay defined in pico seconds. This is used for controllers that have configurable TX internal delays. If this property is present then the MAC applies the TX delay. diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml index 72ac67ca3415..b3b7e1a1b127 100644 --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml @@ -20,9 +20,26 @@ description: select: false -properties: - $nodename: - pattern: "^(ethernet-)?switch(@.*)?$" +allOf: + # This condition is here to satisfy the case where certain device + # nodes have to preserve non-standard names because of + # backward-compatibility with boot loaders inspecting certain + # node names. + - if: + properties: + compatible: + contains: + enum: + - marvell,turris-mox-mv88e6085 + - marvell,turris-mox-mv88e6190 + then: + properties: + $nodename: + pattern: "switch[0-3]@[0-3]+$" + else: + properties: + $nodename: + pattern: "^(ethernet-)?switch(@.*)?$" patternProperties: "^(ethernet-)?ports$": diff --git a/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml b/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml new file mode 100644 index 000000000000..7da8370e2468 --- /dev/null +++ b/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml @@ -0,0 +1,213 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/lantiq,pef2256.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq PEF2256 + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: + The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and + line interface component designed to fulfill all required interfacing between + an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus. + +properties: + compatible: + items: + - const: lantiq,pef2256 + + reg: + maxItems: 1 + + clocks: + items: + - description: Master Clock + - description: System Clock Receive + - description: System Clock Transmit + + clock-names: + items: + - const: mclk + - const: sclkr + - const: sclkx + + interrupts: + maxItems: 1 + + reset-gpios: + description: + GPIO used to reset the device. + maxItems: 1 + + pinctrl: + $ref: /schemas/pinctrl/pinctrl.yaml# + additionalProperties: false + + patternProperties: + '-pins$': + type: object + $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + pins: + enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ] + + function: + enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS, + SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT, + GPI, GPOH, GPOL ] + + required: + - pins + - function + + lantiq,data-rate-bps: + enum: [2048000, 4096000, 8192000, 16384000] + default: 2048000 + description: + Data rate (bit per seconds) on the system highway. + + lantiq,clock-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Data is sent on falling edge of the clock (and received on the rising + edge). If 'clock-falling-edge' is not present, data is sent on the + rising edge (and received on the falling edge). + + lantiq,channel-phase: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 0 + description: | + The pef2256 delivers a full frame (32 8-bit time-slots in E1 and 24 8-bit + time-slots 8 8-bit signaling in E1/J1) every 125us. This lead to a data + rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000 + bit/s, the data (all 32 8-bit) present in the frame are interleave with + unused time-slots. The lantiq,channel-phase property allows to set the + correct alignment of the interleave mechanism. + For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and + lantiq,channel-phase = 2, the interleave schema with unused time-slots + (nu) and used time-slots (XX) for TSi is + nu nu XX nu nu nu XX nu nu nu XX nu + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the + interleave schema is + nu XX nu nu nu XX nu nu nu XX nu nu + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and + lantiq,channel-phase = 1, the interleave schema is + nu XX nu XX nu XX + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + +patternProperties: + '^codec(-([0-9]|[1-2][0-9]|3[0-1]))?$': + type: object + $ref: /schemas/sound/dai-common.yaml + unevaluatedProperties: false + description: + Codec provided by the pef2256. This codec allows to use some of the PCM + system highway time-slots as audio channels to transport audio data over + the E1/T1/J1 lines. + The time-slots used by the codec must be set and so, the properties + 'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and + 'dai-tdm-slot-rx-mask' must be present in the sound card node for + sub-nodes that involve the codec. The codec uses 8-bit time-slots. + 'dai-tdm-tdm-slot-with' must be set to 8. + The tx and rx masks define the pef2256 time-slots assigned to the codec. + + properties: + compatible: + const: lantiq,pef2256-codec + + '#sound-dai-cells': + const: 0 + + required: + - compatible + - '#sound-dai-cells' + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + pef2256: framer@2000000 { + compatible = "lantiq,pef2256"; + reg = <0x2000000 0x100>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&intc>; + clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>; + clock-names = "mclk", "sclkr", "sclkx"; + reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + lantiq,data-rate-bps = <4096000>; + + pinctrl { + pef2256_rpa_sypr: rpa-pins { + pins = "RPA"; + function = "SYPR"; + }; + pef2256_xpa_sypx: xpa-pins { + pins = "XPA"; + function = "SYPX"; + }; + }; + + pef2256_codec0: codec-0 { + compatible = "lantiq,pef2256-codec"; + #sound-dai-cells = <0>; + sound-name-prefix = "PEF2256_0"; + }; + + pef2256_codec1: codec-1 { + compatible = "lantiq,pef2256-codec"; + #sound-dai-cells = <0>; + sound-name-prefix = "PEF2256_1"; + }; + }; + + sound { + compatible = "simple-audio-card"; + #address-cells = <1>; + #size-cells = <0>; + simple-audio-card,dai-link@0 { /* CPU DAI1 - pef2256 codec 1 */ + reg = <0>; + cpu { + sound-dai = <&cpu_dai1>; + }; + codec { + sound-dai = <&pef2256_codec0>; + dai-tdm-slot-num = <4>; + dai-tdm-slot-width = <8>; + /* TS 1, 2, 3, 4 */ + dai-tdm-slot-tx-mask = <0 1 1 1 1>; + dai-tdm-slot-rx-mask = <0 1 1 1 1>; + }; + }; + simple-audio-card,dai-link@1 { /* CPU DAI2 - pef2256 codec 2 */ + reg = <1>; + cpu { + sound-dai = <&cpu_dai2>; + }; + codec { + sound-dai = <&pef2256_codec1>; + dai-tdm-slot-num = <4>; + dai-tdm-slot-width = <8>; + /* TS 5, 6, 7, 8 */ + dai-tdm-slot-tx-mask = <0 0 0 0 0 1 1 1 1>; + dai-tdm-slot-rx-mask = <0 0 0 0 0 1 1 1 1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/marvell,aquantia.yaml b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml new file mode 100644 index 000000000000..9854fab4c4db --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,aquantia.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Aquantia Ethernet PHY + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +description: | + Marvell Aquantia Ethernet PHY require a firmware to be loaded to actually + work. + + This can be done and is implemented by OEM in 3 different way: + - Attached SPI flash directly to the PHY with the firmware. The PHY + will self load the firmware in the presence of this configuration. + - Read from a dedicated partition on system NAND declared in an + NVMEM cell, and loaded to the PHY using its mailbox interface. + - Manually provided firmware loaded from a file in the filesystem. + +allOf: + - $ref: ethernet-phy.yaml# + +select: + properties: + compatible: + contains: + enum: + - ethernet-phy-id03a1.b445 + - ethernet-phy-id03a1.b460 + - ethernet-phy-id03a1.b4a2 + - ethernet-phy-id03a1.b4d0 + - ethernet-phy-id03a1.b4e0 + - ethernet-phy-id03a1.b5c2 + - ethernet-phy-id03a1.b4b0 + - ethernet-phy-id03a1.b662 + - ethernet-phy-id03a1.b712 + - ethernet-phy-id31c3.1c12 + required: + - compatible + +properties: + reg: + maxItems: 1 + + firmware-name: + description: specify the name of PHY firmware to load + + nvmem-cells: + description: phandle to the firmware nvmem cell + maxItems: 1 + + nvmem-cell-names: + const: firmware + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-id31c3.1c12", + "ethernet-phy-ieee802.3-c45"; + + reg = <0>; + firmware-name = "AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x8_ID44776_VER1630.cld"; + }; + + ethernet-phy@1 { + compatible = "ethernet-phy-id31c3.1c12", + "ethernet-phy-ieee802.3-c45"; + + reg = <1>; + nvmem-cells = <&aqr_fw>; + nvmem-cell-names = "firmware"; + }; + }; + + flash { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* ... */ + + partition@650000 { + compatible = "nvmem-cells"; + label = "0:ethphyfw"; + reg = <0x650000 0x80000>; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + aqr_fw: aqr_fw@0 { + reg = <0x0 0x5f42a>; + }; + }; + + /* ... */ + + }; + }; diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml index 3a3325168048..ab838c1ffeed 100644 --- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml +++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml @@ -50,11 +50,14 @@ examples: #address-cells = <1>; #size-cells = <0>; - switch@0 { + ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0x0>; - ports { + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + /* Port definitions */ }; diff --git a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml index e35da8b01dc2..73429855d584 100644 --- a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml +++ b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml @@ -39,28 +39,6 @@ required: allOf: - $ref: mdio.yaml# - - if: - required: - - interrupts - - then: - properties: - reg: - items: - - items: - - $ref: /schemas/types.yaml#/definitions/cell - - const: 0x84 - - else: - properties: - reg: - items: - - items: - - $ref: /schemas/types.yaml#/definitions/cell - - enum: - - 0x4 - - 0x10 - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 2d5e4ffb2f9e..c30218684cfe 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -43,15 +43,21 @@ description: properties: compatible: - enum: - - qcom,msm8998-ipa - - qcom,sc7180-ipa - - qcom,sc7280-ipa - - qcom,sdm845-ipa - - qcom,sdx55-ipa - - qcom,sdx65-ipa - - qcom,sm6350-ipa - - qcom,sm8350-ipa + oneOf: + - enum: + - qcom,msm8998-ipa + - qcom,sc7180-ipa + - qcom,sc7280-ipa + - qcom,sdm845-ipa + - qcom,sdx55-ipa + - qcom,sdx65-ipa + - qcom,sm6350-ipa + - qcom,sm8350-ipa + - qcom,sm8550-ipa + - items: + - enum: + - qcom,sm8650-ipa + - const: qcom,sm8550-ipa reg: items: diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index 5d074f27d462..890f7858d0dc 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -55,9 +55,10 @@ properties: - items: - enum: - - renesas,r9a07g043-gbeth # RZ/G2UL + - renesas,r9a07g043-gbeth # RZ/G2UL and RZ/Five - renesas,r9a07g044-gbeth # RZ/G2{L,LC} - renesas,r9a07g054-gbeth # RZ/V2L + - renesas,r9a08g045-gbeth # RZ/G3S - const: renesas,rzg2l-gbeth # RZ/{G2L,G2UL,V2L} family reg: true diff --git a/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml b/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml new file mode 100644 index 000000000000..475aff7714d6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/renesas,ethertsn.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Ethernet TSN End-station + +maintainers: + - Niklas Söderlund <niklas.soderlund@ragnatech.se> + +description: + The RTSN device provides Ethernet network using a 10 Mbps, 100 Mbps, or 1 + Gbps full-duplex link via MII/GMII/RMII/RGMII. Depending on the connected PHY. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r8a779g0-ethertsn # R-Car V4H + - const: renesas,rcar-gen4-ethertsn + + reg: + items: + - description: TSN End Station target + - description: generalized Precision Time Protocol target + + reg-names: + items: + - const: tsnes + - const: gptp + + interrupts: + items: + - description: TX data interrupt + - description: RX data interrupt + + interrupt-names: + items: + - const: tx + - const: rx + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + phy-mode: + contains: + enum: + - mii + - rgmii + + phy-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Specifies a reference to a node representing a PHY device. + + rx-internal-delay-ps: + enum: [0, 1800] + + tx-internal-delay-ps: + enum: [0, 2000] + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + $ref: ethernet-phy.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - power-domains + - resets + - phy-mode + - phy-handle + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779g0-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a779g0-sysc.h> + #include <dt-bindings/gpio/gpio.h> + + tsn0: ethernet@e6460000 { + compatible = "renesas,r8a779g0-ethertsn", "renesas,rcar-gen4-ethertsn"; + reg = <0xe6460000 0x7000>, + <0xe6449000 0x500>; + reg-names = "tsnes", "gptp"; + interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + clocks = <&cpg CPG_MOD 2723>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 2723>; + + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + phy-handle = <&phy3>; + + #address-cells = <1>; + #size-cells = <0>; + + phy3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml index 1d33d80af11c..bbe89ea9590c 100644 --- a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml @@ -122,6 +122,20 @@ properties: and "phy-handle" should point to an external PHY if exists. maxItems: 1 + dmas: + minItems: 2 + maxItems: 32 + description: TX and RX DMA channel phandle + + dma-names: + items: + pattern: "^[tr]x_chan([0-9]|1[0-5])$" + description: + Should be "tx_chan0", "tx_chan1" ... "tx_chan15" for DMA Tx channel + Should be "rx_chan0", "rx_chan1" ... "rx_chan15" for DMA Rx channel + minItems: 2 + maxItems: 32 + required: - compatible - interrupts @@ -143,6 +157,8 @@ examples: clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; phy-mode = "mii"; reg = <0x40c00000 0x40000>,<0x50c00000 0x40000>; + dmas = <&xilinx_dma 0>, <&xilinx_dma 1>; + dma-names = "tx_chan0", "rx_chan0"; xlnx,rxcsum = <0x2>; xlnx,rxmem = <0x800>; xlnx,txcsum = <0x2>; diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml index f43186f98607..d9287be89877 100644 --- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml @@ -15,9 +15,11 @@ allOf: properties: compatible: - enum: - - fsl,imx23-ocotp - - fsl,imx28-ocotp + items: + - enum: + - fsl,imx23-ocotp + - fsl,imx28-ocotp + - const: fsl,ocotp reg: maxItems: 1 @@ -35,7 +37,7 @@ unevaluatedProperties: false examples: - | ocotp: efuse@8002c000 { - compatible = "fsl,imx28-ocotp"; + compatible = "fsl,imx28-ocotp", "fsl,ocotp"; #address-cells = <1>; #size-cells = <1>; reg = <0x8002c000 0x2000>; diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml index e9fad4b3de68..6c96a4204e5d 100644 --- a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml +++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml @@ -27,6 +27,9 @@ properties: - fsl,imx8mq-ddr-pmu - fsl,imx8mp-ddr-pmu - const: fsl,imx8m-ddr-pmu + - items: + - const: fsl,imx8dxl-ddr-pmu + - const: fsl,imx8-ddr-pmu reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/perf/riscv,pmu.yaml b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml index c8448de2f2a0..d01c677ad3c7 100644 --- a/Documentation/devicetree/bindings/perf/riscv,pmu.yaml +++ b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml @@ -90,7 +90,7 @@ properties: bitmap of all MHPMCOUNTERx that can monitor the range of events dependencies: - "riscv,event-to-mhpmevent": [ "riscv,event-to-mhpmcounters" ] + riscv,event-to-mhpmevent: [ "riscv,event-to-mhpmcounters" ] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml index d49aafd8c5f4..a24286e4def6 100644 --- a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml @@ -9,7 +9,7 @@ title: NXP S32G2 pin controller maintainers: - Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com> - - Chester Lin <clin@suse.com> + - Chester Lin <chester62515@gmail.com> description: | S32G2 pinmux is implemented in SIUL2 (System Integration Unit Lite2), diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml index c01dff3b7f84..a84a240a61dc 100644 --- a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml @@ -14,12 +14,10 @@ allOf: properties: "#pwm-cells": - description: | - Should be 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.yaml - in this directory for a description of the cells format. - enum: - - 2 - - 3 + description: + The only third cell flag supported by this binding is + PWM_POLARITY_INVERTED. fsl,imx1-pwm does not support this flags. + const: 3 compatible: oneOf: diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml index 2162f661ed5a..17a2b927af33 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml @@ -29,7 +29,11 @@ properties: - samsung,exynos4210-pwm # 32-bit, Exynos - items: - enum: + - samsung,exynos5433-pwm + - samsung,exynos7-pwm - samsung,exynosautov9-pwm + - samsung,exynosautov920-pwm + - tesla,fsd-pwm - const: samsung,exynos4210-pwm reg: diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml index ce7751b9129c..9ff9abf2691a 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -105,6 +105,8 @@ properties: description: Interrupt signaling a critical under-voltage event. + system-critical-regulator: true + required: - compatible - regulator-name diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index acd37f28ef53..27c6d5152413 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -42,6 +42,7 @@ description: | For PM7325, smps1 - smps8, ldo1 - ldo19 For PM8005, smps1 - smps4 For PM8009, smps1 - smps2, ldo1 - ldo7 + For PM8010, ldo1 - ldo7 For PM8150, smps1 - smps10, ldo1 - ldo18 For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb For PM8350, smps1 - smps12, ldo1 - ldo10 @@ -68,6 +69,7 @@ properties: - qcom,pm8005-rpmh-regulators - qcom,pm8009-rpmh-regulators - qcom,pm8009-1-rpmh-regulators + - qcom,pm8010-rpmh-regulators - qcom,pm8150-rpmh-regulators - qcom,pm8150l-rpmh-regulators - qcom,pm8350-rpmh-regulators @@ -242,6 +244,18 @@ allOf: properties: compatible: enum: + - qcom,pm8010-rpmh-regulators + then: + properties: + vdd-l1-l2-supply: true + vdd-l3-l4-supply: true + patternProperties: + "^vdd-l[5-7]-supply$": true + + - if: + properties: + compatible: + enum: - qcom,pm8150-rpmh-regulators - qcom,pmc8180-rpmh-regulators - qcom,pmm8155au-rpmh-regulators diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index 9ea8ac0786ac..f2fd2df68a9e 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -47,6 +47,9 @@ description: For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18 + For pm8937, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, + l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23 + For pm8941, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3, 5vs1, 5vs2 @@ -92,6 +95,7 @@ properties: - qcom,rpm-pm8841-regulators - qcom,rpm-pm8909-regulators - qcom,rpm-pm8916-regulators + - qcom,rpm-pm8937-regulators - qcom,rpm-pm8941-regulators - qcom,rpm-pm8950-regulators - qcom,rpm-pm8953-regulators diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml index 7a1b7d2abbd4..aea849e8eadf 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml @@ -22,6 +22,7 @@ properties: - qcom,pm8841-regulators - qcom,pm8909-regulators - qcom,pm8916-regulators + - qcom,pm8937-regulators - qcom,pm8941-regulators - qcom,pm8950-regulators - qcom,pm8994-regulators @@ -296,6 +297,24 @@ allOf: compatible: contains: enum: + - qcom,pm8937-regulators + then: + properties: + vdd_l1_l19-supply: true + vdd_l20_l21-supply: true + vdd_l2_l23-supply: true + vdd_l3-supply: true + vdd_l4_l5_l6_l7_l16-supply: true + vdd_l8_l11_l12_l17_l22-supply: true + vdd_l9_l10_l13_l14_l15_l18-supply: true + patternProperties: + "^vdd_s[1-6]-supply$": true + + - if: + properties: + compatible: + contains: + enum: - qcom,pm8950-regulators then: properties: diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml index 89c564dfa5db..534f87e98716 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -36,10 +36,11 @@ unevaluatedProperties: false examples: - | - pm8150b { + pmic { #address-cells = <1>; #size-cells = <0>; - pm8150b_vbus: usb-vbus-regulator@1100 { + + usb-vbus-regulator@1100 { compatible = "qcom,pm8150b-vbus-reg"; reg = <0x1100>; regulator-min-microamp = <500000>; diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index 9daf0fc2465f..1ef380d1515e 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -114,6 +114,11 @@ properties: description: Enable pull down resistor when the regulator is disabled. type: boolean + system-critical-regulator: + description: Set if the regulator is critical to system stability or + functionality. + type: boolean + regulator-over-current-protection: description: Enable over current protection. type: boolean @@ -181,6 +186,14 @@ properties: be enabled but limit setting can be omitted. Limit is given as microvolt offset from voltage set to regulator. + regulator-uv-less-critical-window-ms: + description: Specifies the time window (in milliseconds) following a + critical under-voltage event during which the system can continue to + operate safely while performing less critical operations. This property + provides a defined duration before a more severe reaction to the + under-voltage event is needed, allowing for certain non-urgent actions to + be carried out in preparation for potential power loss. + regulator-temp-protection-kelvin: description: Set over temperature protection limit. This is a limit where hardware performs emergency shutdown. Zero can be passed to disable diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml index d3fdee89d4f8..f0c6c0df0ce3 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml @@ -18,6 +18,7 @@ properties: - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs + - amlogic,c3-reset # Reset Controller on C3 and compatible SoCs reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml index b11ac533f914..f5ec1d54aa51 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml +++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml @@ -28,28 +28,17 @@ description: | properties: compatible: oneOf: - - const: "fsl,imx51-src" + - const: fsl,imx51-src - items: - - const: "fsl,imx50-src" - - const: "fsl,imx51-src" - - items: - - const: "fsl,imx53-src" - - const: "fsl,imx51-src" - - items: - - const: "fsl,imx6q-src" - - const: "fsl,imx51-src" - - items: - - const: "fsl,imx6sx-src" - - const: "fsl,imx51-src" - - items: - - const: "fsl,imx6sl-src" - - const: "fsl,imx51-src" - - items: - - const: "fsl,imx6ul-src" - - const: "fsl,imx51-src" - - items: - - const: "fsl,imx6sll-src" - - const: "fsl,imx51-src" + - enum: + - fsl,imx50-src + - fsl,imx53-src + - fsl,imx6q-src + - fsl,imx6sx-src + - fsl,imx6sl-src + - fsl,imx6ul-src + - fsl,imx6sll-src + - const: fsl,imx51-src reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml index cdfcf32c53fa..e4de002d6903 100644 --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml @@ -50,32 +50,9 @@ additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/hi3660-clock.h> - - iomcu: iomcu@ffd7e000 { - compatible = "hisilicon,hi3660-iomcu", "syscon"; - reg = <0xffd7e000 0x1000>; - }; - - iomcu_rst: iomcu_rst_controller { + iomcu_rst_controller { compatible = "hisilicon,hi3660-reset"; hisilicon,rst-syscon = <&iomcu>; #reset-cells = <2>; }; - - /* Specifying reset lines connected to IP modules */ - i2c@ffd71000 { - compatible = "snps,designware-i2c"; - reg = <0xffd71000 0x1000>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <400000>; - clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>; - resets = <&iomcu_rst 0x20 3>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; - }; ... diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml index d92e2b3cc83f..24beb712b56d 100644 --- a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml +++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml @@ -18,17 +18,17 @@ properties: oneOf: - description: on SC7180 SoCs the following compatibles must be specified items: - - const: "qcom,sc7180-aoss-cc" - - const: "qcom,sdm845-aoss-cc" + - const: qcom,sc7180-aoss-cc + - const: qcom,sdm845-aoss-cc - description: on SC7280 SoCs the following compatibles must be specified items: - - const: "qcom,sc7280-aoss-cc" - - const: "qcom,sdm845-aoss-cc" + - const: qcom,sc7280-aoss-cc + - const: qcom,sdm845-aoss-cc - description: on SDM845 SoCs the following compatibles must be specified items: - - const: "qcom,sdm845-aoss-cc" + - const: qcom,sdm845-aoss-cc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml index ca5d79332189..f514363aa474 100644 --- a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml +++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml @@ -18,16 +18,16 @@ properties: oneOf: - description: on SC7180 SoCs the following compatibles must be specified items: - - const: "qcom,sc7180-pdc-global" - - const: "qcom,sdm845-pdc-global" + - const: qcom,sc7180-pdc-global + - const: qcom,sdm845-pdc-global - description: on SC7280 SoCs the following compatibles must be specified items: - - const: "qcom,sc7280-pdc-global" + - const: qcom,sc7280-pdc-global - description: on SDM845 SoCs the following compatibles must be specified items: - - const: "qcom,sdm845-pdc-global" + - const: qcom,sdm845-pdc-global reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml index 731b8ce01525..03c18611e42d 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml +++ b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml @@ -17,7 +17,7 @@ properties: compatible: items: - enum: - - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL + - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL and RZ/Five - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC} - renesas,r9a07g054-usbphy-ctrl # RZ/V2L - const: renesas,rzg2l-usbphy-ctrl diff --git a/Documentation/devicetree/bindings/riscv/sophgo.yaml b/Documentation/devicetree/bindings/riscv/sophgo.yaml index 86748c5390be..9bc813dad098 100644 --- a/Documentation/devicetree/bindings/riscv/sophgo.yaml +++ b/Documentation/devicetree/bindings/riscv/sophgo.yaml @@ -24,6 +24,10 @@ properties: - const: sophgo,cv1800b - items: - enum: + - sophgo,huashan-pi + - const: sophgo,cv1812h + - items: + - enum: - milkv,pioneer - const: sophgo,sg2042 diff --git a/Documentation/devicetree/bindings/rng/starfive,jh7110-trng.yaml b/Documentation/devicetree/bindings/rng/starfive,jh7110-trng.yaml index 2b76ce25acc4..4639247e9e51 100644 --- a/Documentation/devicetree/bindings/rng/starfive,jh7110-trng.yaml +++ b/Documentation/devicetree/bindings/rng/starfive,jh7110-trng.yaml @@ -11,7 +11,11 @@ maintainers: properties: compatible: - const: starfive,jh7110-trng + oneOf: + - items: + - const: starfive,jh8100-trng + - const: starfive,jh7110-trng + - const: starfive,jh7110-trng reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml index d51b236939bf..bf4e11d6dffb 100644 --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml @@ -17,6 +17,11 @@ properties: - samsung,s3c2416-rtc - samsung,s3c2443-rtc - samsung,s3c6410-rtc + - items: + - enum: + - samsung,exynos7-rtc + - samsung,exynos850-rtc + - const: samsung,s3c6410-rtc - const: samsung,exynos3250-rtc deprecated: true diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index ac60ab1e35e3..133259ed3a34 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -18,17 +18,29 @@ description: |+ properties: compatible: oneOf: - - items: - - const: samsung,exynosautov9-uart - - const: samsung,exynos850-uart - enum: - apple,s5l-uart - axis,artpec8-uart + - google,gs101-uart - samsung,s3c6400-uart - samsung,s5pv210-uart - samsung,exynos4210-uart - samsung,exynos5433-uart - samsung,exynos850-uart + - items: + - enum: + - samsung,exynos7-uart + - tesla,fsd-uart + - const: samsung,exynos4210-uart + - items: + - enum: + - samsung,exynos7885-uart + - const: samsung,exynos5433-uart + - items: + - enum: + - samsung,exynosautov9-uart + - samsung,exynosautov920-uart + - const: samsung,exynos850-uart reg: maxItems: 1 @@ -122,6 +134,16 @@ allOf: - const: uart - const: clk_uart_baud0 + - if: + properties: + compatible: + contains: + enum: + - google,gs101-uart + then: + required: + - samsung,uart-fifosize + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml index 16977e4e4357..c6bce40946d4 100644 --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml @@ -158,3 +158,36 @@ examples: }; }; }; + + - | + system-controller@ff63c000 { + compatible = "amlogic,meson-axg-hhi-sysctrl", "simple-mfd", "syscon"; + reg = <0xff63c000 0x400>; + + clock-controller { + compatible = "amlogic,axg-clkc"; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; + }; + + power-controller { + compatible = "amlogic,meson-axg-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&sysctrl_AO>; + + resets = <&reset_viu>, + <&reset_venc>, + <&reset_vcbus>, + <&reset_vencl>, + <&reset_vid_lock>; + reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock"; + clocks = <&clk_vpu>, <&clk_vapb>; + clock-names = "vpu", "vapb"; + }; + + phy { + compatible = "amlogic,axg-mipi-pcie-analog-phy"; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml index a06ac2177444..4737e5f45d54 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml @@ -41,7 +41,6 @@ properties: - mediatek,mt8173-pwrap - mediatek,mt8183-pwrap - mediatek,mt8186-pwrap - - mediatek,mt8188-pwrap - mediatek,mt8195-pwrap - mediatek,mt8365-pwrap - mediatek,mt8516-pwrap @@ -50,6 +49,11 @@ properties: - mediatek,mt8186-pwrap - mediatek,mt8195-pwrap - const: syscon + - items: + - enum: + - mediatek,mt8188-pwrap + - const: mediatek,mt8195-pwrap + - const: syscon reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml index 7eda63d5682f..742b91d1d28e 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml @@ -22,8 +22,10 @@ properties: compatible: enum: - mediatek,mt8183-svs + - mediatek,mt8186-svs - mediatek,mt8188-svs - mediatek,mt8192-svs + - mediatek,mt8195-svs reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml index 365a9fed5914..a3fa04f3a1bd 100644 --- a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml +++ b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml @@ -26,6 +26,16 @@ properties: compatible: const: microchip,mpfs-sys-controller + microchip,bitstream-flash: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The SPI flash connected to the system controller's QSPI controller. + The system controller may retrieve FPGA bitstreams from this flash to + perform In-Application Programming (IAP) or during device initialisation + for Auto Update. The MSS and system controller have separate QSPI + controllers and this flash is connected to both. Software running in the + MSS can write bitstreams to the flash. + required: - compatible - mboxes diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index d1c7c2be865f..b4478f417edc 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -38,6 +38,8 @@ properties: - qcom,sm8350-aoss-qmp - qcom,sm8450-aoss-qmp - qcom,sm8550-aoss-qmp + - qcom,sm8650-aoss-qmp + - qcom,x1e80100-aoss-qmp - const: qcom,aoss-qmp reg: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index 422921cf1f82..61df97ffe1e4 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -20,14 +20,20 @@ description: properties: compatible: - items: - - enum: - - qcom,sc8180x-pmic-glink - - qcom,sc8280xp-pmic-glink - - qcom,sm8350-pmic-glink - - qcom,sm8450-pmic-glink - - qcom,sm8550-pmic-glink - - const: qcom,pmic-glink + oneOf: + - items: + - enum: + - qcom,sc8180x-pmic-glink + - qcom,sc8280xp-pmic-glink + - qcom,sm8350-pmic-glink + - qcom,sm8450-pmic-glink + - qcom,sm8550-pmic-glink + - const: qcom,pmic-glink + - items: + - enum: + - qcom,sm8650-pmic-glink + - const: qcom,sm8550-pmic-glink + - const: qcom,pmic-glink '#address-cells': const: 1 diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml index 96a7f1822022..686a7ef2f48a 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml @@ -31,10 +31,24 @@ properties: reg: maxItems: 1 + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference to the AOSS side-channel message RAM + required: - compatible - reg +allOf: + - if: + not: + properties: + compatible: + const: qcom,rpmh-stats + then: + properties: + qcom,qmp: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index e4fa6a07b4fa..9793ea6f0fe6 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -28,6 +28,8 @@ properties: - rockchip,rk3588-sys-grf - rockchip,rk3588-pcie3-phy-grf - rockchip,rk3588-pcie3-pipe-grf + - rockchip,rk3588-vo-grf + - rockchip,rk3588-vop-grf - rockchip,rv1108-usbgrf - const: syscon - items: @@ -233,6 +235,7 @@ allOf: - rockchip,rk3399-grf - rockchip,rk3399-pmugrf - rockchip,rk3568-pmugrf + - rockchip,rk3588-pmugrf - rockchip,rv1108-grf - rockchip,rv1108-pmugrf diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml index e1d716df5dfa..15fcd8f1d8bc 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml @@ -15,6 +15,7 @@ select: compatible: contains: enum: + - google,gs101-pmu - samsung,exynos3250-pmu - samsung,exynos4210-pmu - samsung,exynos4212-pmu @@ -35,6 +36,7 @@ properties: oneOf: - items: - enum: + - google,gs101-pmu - samsung,exynos3250-pmu - samsung,exynos4210-pmu - samsung,exynos4212-pmu @@ -50,6 +52,14 @@ properties: - const: syscon - items: - enum: + - samsung,exynos7885-pmu + - samsung,exynosautov9-pmu + - samsung,exynosautov920-pmu + - tesla,fsd-pmu + - const: samsung,exynos7-pmu + - const: syscon + - items: + - enum: - samsung,exynos3250-pmu - samsung,exynos4210-pmu - samsung,exynos4212-pmu diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml index a6836904a4f8..8b478d6cdc30 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -24,7 +24,10 @@ properties: compatible: oneOf: - items: - - const: samsung,exynosautov9-usi + - enum: + - google,gs101-usi + - samsung,exynosautov9-usi + - samsung,exynosautov920-usi - const: samsung,exynos850-usi - enum: - samsung,exynos850-usi @@ -155,7 +158,7 @@ examples: }; hsi2c_0: i2c@13820000 { - compatible = "samsung,exynosautov9-hsi2c"; + compatible = "samsung,exynos850-hsi2c", "samsung,exynosautov9-hsi2c"; reg = <0x13820000 0xc0>; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml index 163e912e9cad..1794e3799f21 100644 --- a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml @@ -14,9 +14,14 @@ properties: oneOf: - items: - enum: + - google,gs101-apm-sysreg + - google,gs101-peric0-sysreg + - google,gs101-peric1-sysreg - samsung,exynos3-sysreg - samsung,exynos4-sysreg - samsung,exynos5-sysreg + - samsung,exynosautov920-peric0-sysreg + - samsung,exynosautov920-peric1-sysreg - tesla,fsd-cam-sysreg - tesla,fsd-fsys0-sysreg - tesla,fsd-fsys1-sysreg diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml index f57ed0347894..d4c0fe1fe435 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.yaml +++ b/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/xilinx.yaml# +$id: http://devicetree.org/schemas/soc/xilinx/xilinx.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq Platforms @@ -132,6 +132,11 @@ properties: - const: xlnx,zynqmp-smk-k26 - const: xlnx,zynqmp + - description: AMD MicroBlaze V (QEMU) + items: + - const: qemu,mbv + - const: amd,mbv + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/sound/adi,max98363.yaml b/Documentation/devicetree/bindings/sound/adi,max98363.yaml index a844b63f3930..c388cda56011 100644 --- a/Documentation/devicetree/bindings/sound/adi,max98363.yaml +++ b/Documentation/devicetree/bindings/sound/adi,max98363.yaml @@ -39,7 +39,7 @@ unevaluatedProperties: false examples: - | - soundwire-controller@3250000 { + soundwire@3250000 { #address-cells = <2>; #size-cells = <0>; reg = <0x3250000 0x2000>; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml index 60b5e3fd1115..b13c08de505e 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml @@ -19,6 +19,12 @@ definitions: properties: mclk-fs: $ref: simple-card.yaml#/definitions/mclk-fs + playback-only: + description: port connection used only for playback + $ref: /schemas/types.yaml#/definitions/flag + capture-only: + description: port connection used only for capture + $ref: /schemas/types.yaml#/definitions/flag endpoint-base: allOf: diff --git a/Documentation/devicetree/bindings/sound/es8328.txt b/Documentation/devicetree/bindings/sound/es8328.txt deleted file mode 100644 index 33fbf058c997..000000000000 --- a/Documentation/devicetree/bindings/sound/es8328.txt +++ /dev/null @@ -1,38 +0,0 @@ -Everest ES8328 audio CODEC - -This device supports both I2C and SPI. - -Required properties: - - - compatible : Should be "everest,es8328" or "everest,es8388" - - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V - - AVDD-supply : Regulator providing analog supply voltage 3.3V - - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V - - IPVDD-supply : Regulator providing analog output voltage 3.3V - - clocks : A 22.5792 or 11.2896 MHz clock - - reg : the I2C address of the device for I2C, the chip select number for SPI - -Pins on the device (for linking into audio routes): - - * LOUT1 - * LOUT2 - * ROUT1 - * ROUT2 - * LINPUT1 - * RINPUT1 - * LINPUT2 - * RINPUT2 - * Mic Bias - - -Example: - -codec: es8328@11 { - compatible = "everest,es8328"; - DVDD-supply = <®_3p3v>; - AVDD-supply = <®_3p3v>; - PVDD-supply = <®_3p3v>; - HPVDD-supply = <®_3p3v>; - clocks = <&clks 169>; - reg = <0x11>; -}; diff --git a/Documentation/devicetree/bindings/sound/everest,es8328.yaml b/Documentation/devicetree/bindings/sound/everest,es8328.yaml new file mode 100644 index 000000000000..a0f4670fa38c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/everest,es8328.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/everest,es8328.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Everest ES8328 audio CODEC + +description: + Everest Audio Codec, which can be connected via I2C or SPI. + Pins on the device (for linking into audio routes) are + * LOUT1 + * LOUT2 + * ROUT1 + * ROUT2 + * LINPUT1 + * RINPUT1 + * LINPUT2 + * RINPUT2 + * Mic Bias + +maintainers: + - David Yang <yangxiaohua@everest-semi.com> + +properties: + compatible: + enum: + - everest,es8328 + - everest,es8388 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + items: + - description: A 22.5792 or 11.2896 MHz clock + + DVDD-supply: + description: Regulator providing digital core supply voltage 1.8 - 3.6V + + AVDD-supply: + description: Regulator providing analog supply voltage 3.3V + + PVDD-supply: + description: Regulator providing digital IO supply voltage 1.8 - 3.6V + + HPVDD-supply: + description: Regulator providing analog output voltage 3.3V + +required: + - compatible + - clocks + - DVDD-supply + - AVDD-supply + - PVDD-supply + - HPVDD-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + es8328: codec@11 { + compatible = "everest,es8328"; + reg = <0x11>; + AVDD-supply = <®_3p3v>; + DVDD-supply = <®_3p3v>; + HPVDD-supply = <®_3p3v>; + PVDD-supply = <®_3p3v>; + clocks = <&clks 169>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.txt b/Documentation/devicetree/bindings/sound/fsl,mqs.txt deleted file mode 100644 index d66284b8bef2..000000000000 --- a/Documentation/devicetree/bindings/sound/fsl,mqs.txt +++ /dev/null @@ -1,36 +0,0 @@ -fsl,mqs audio CODEC - -Required properties: - - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs" - "fsl,imx8qm-mqs", "fsl,imx8qxp-mqs", "fsl,imx93-mqs". - - clocks : A list of phandles + clock-specifiers, one for each entry in - clock-names - - clock-names : "mclk" - must required. - "core" - required if compatible is "fsl,imx8qm-mqs", it - is for register access. - - gpr : A phandle of General Purpose Registers in IOMUX Controller. - Required if compatible is "fsl,imx6sx-mqs". - -Required if compatible is "fsl,imx8qm-mqs": - - power-domains: A phandle of PM domain provider node. - - reg: Offset and length of the register set for the device. - -Example: - -mqs: mqs { - compatible = "fsl,imx6sx-mqs"; - gpr = <&gpr>; - clocks = <&clks IMX6SX_CLK_SAI1>; - clock-names = "mclk"; - status = "disabled"; -}; - -mqs: mqs@59850000 { - compatible = "fsl,imx8qm-mqs"; - reg = <0x59850000 0x10000>; - clocks = <&clk IMX8QM_AUD_MQS_IPG>, - <&clk IMX8QM_AUD_MQS_HMCLK>; - clock-names = "core", "mclk"; - power-domains = <&pd_mqs0>; - status = "disabled"; -}; diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.yaml b/Documentation/devicetree/bindings/sound/fsl,mqs.yaml new file mode 100644 index 000000000000..8b33353a80ca --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,mqs.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,mqs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Medium Quality Sound (MQS) + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + - Chancel Liu <chancel.liu@nxp.com> + +description: | + Medium quality sound (MQS) is used to generate medium quality audio + via a standard GPIO in the pinmux, allowing the user to connect + stereo speakers or headphones to a power amplifier without an + additional DAC chip. + +properties: + compatible: + enum: + - fsl,imx6sx-mqs + - fsl,imx8qm-mqs + - fsl,imx8qxp-mqs + - fsl,imx93-mqs + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + + gpr: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle to the General Purpose Register (GPR) node + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qm-mqs + - fsl,imx8qxp-mqs + then: + properties: + clocks: + items: + - description: Master clock + - description: Clock for register access + clock-names: + items: + - const: mclk + - const: core + required: + - reg + - power-domains + else: + properties: + clocks: + items: + - description: Master clock + clock-names: + items: + - const: mclk + required: + - gpr + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6sx-clock.h> + mqs0: mqs { + compatible = "fsl,imx6sx-mqs"; + gpr = <&gpr>; + clocks = <&clks IMX6SX_CLK_SAI1>; + clock-names = "mclk"; + }; + + - | + #include <dt-bindings/firmware/imx/rsrc.h> + mqs1: mqs@59850000 { + compatible = "fsl,imx8qm-mqs"; + reg = <0x59850000 0x10000>; + clocks = <&mqs0_lpcg 0>, <&mqs0_lpcg 1>; + clock-names = "mclk", "core"; + power-domains = <&pd IMX_SC_R_MQS_0>; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml index 799b362ba498..0eb0c1ba8710 100644 --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml @@ -38,7 +38,10 @@ properties: - const: txfifo interrupts: - maxItems: 1 + items: + - description: WAKEUPMIX Audio XCVR Interrupt 1 + - description: WAKEUPMIX Audio XCVR Interrupt 2 + minItems: 1 clocks: items: @@ -78,6 +81,23 @@ required: - dma-names - resets +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx93-xcvr + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + else: + properties: + interrupts: + maxItems: 1 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt2701-audio.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt2701-audio.yaml new file mode 100644 index 000000000000..45382c4d86aa --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt2701-audio.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt2701-audio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Audio Front End (AFE) PCM controller for mt2701 + +description: + The AFE PCM node must be a subnode of the MediaTek audsys device tree node. + +maintainers: + - Eugen Hristev <eugen.hristev@collabora.com> + +properties: + compatible: + enum: + - mediatek,mt2701-audio + - mediatek,mt7622-audio + + interrupts: + items: + - description: AFE interrupt + - description: ASYS interrupt + + interrupt-names: + items: + - const: afe + - const: asys + + power-domains: + maxItems: 1 + + clocks: + items: + - description: audio infra sys clock + - description: top audio mux 1 + - description: top audio mux 2 + - description: top audio sys a1 clock + - description: top audio sys a2 clock + - description: i2s0 source selection + - description: i2s1 source selection + - description: i2s2 source selection + - description: i2s3 source selection + - description: i2s0 source divider + - description: i2s1 source divider + - description: i2s2 source divider + - description: i2s3 source divider + - description: i2s0 master clock + - description: i2s1 master clock + - description: i2s2 master clock + - description: i2s3 master clock + - description: i2so0 hopping clock + - description: i2so1 hopping clock + - description: i2so2 hopping clock + - description: i2so3 hopping clock + - description: i2si0 hopping clock + - description: i2si1 hopping clock + - description: i2si2 hopping clock + - description: i2si3 hopping clock + - description: asrc0 output clock + - description: asrc1 output clock + - description: asrc2 output clock + - description: asrc3 output clock + - description: audio front end pd clock + - description: audio front end conn pd clock + - description: top audio a1 sys pd + - description: top audio a2 sys pd + - description: audio merge interface pd + + clock-names: + items: + - const: infra_sys_audio_clk + - const: top_audio_mux1_sel + - const: top_audio_mux2_sel + - const: top_audio_a1sys_hp + - const: top_audio_a2sys_hp + - const: i2s0_src_sel + - const: i2s1_src_sel + - const: i2s2_src_sel + - const: i2s3_src_sel + - const: i2s0_src_div + - const: i2s1_src_div + - const: i2s2_src_div + - const: i2s3_src_div + - const: i2s0_mclk_en + - const: i2s1_mclk_en + - const: i2s2_mclk_en + - const: i2s3_mclk_en + - const: i2so0_hop_ck + - const: i2so1_hop_ck + - const: i2so2_hop_ck + - const: i2so3_hop_ck + - const: i2si0_hop_ck + - const: i2si1_hop_ck + - const: i2si2_hop_ck + - const: i2si3_hop_ck + - const: asrc0_out_ck + - const: asrc1_out_ck + - const: asrc2_out_ck + - const: asrc3_out_ck + - const: audio_afe_pd + - const: audio_afe_conn_pd + - const: audio_a1sys_pd + - const: audio_a2sys_pd + - const: audio_mrgif_pd + +required: + - compatible + - interrupts + - interrupt-names + - power-domains + - clocks + - clock-names + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml index 4c8c95057ef7..f94ad0715e32 100644 --- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml @@ -15,6 +15,7 @@ allOf: properties: compatible: enum: + - mediatek,mt8188-es8326 - mediatek,mt8188-mt6359-evb - mediatek,mt8188-nau8825 - mediatek,mt8188-rt5682s diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt deleted file mode 100644 index f548e6a58240..000000000000 --- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt +++ /dev/null @@ -1,146 +0,0 @@ -Mediatek AFE PCM controller for mt2701 - -Required properties: -- compatible: should be one of the following. - - "mediatek,mt2701-audio" - - "mediatek,mt7622-audio" -- interrupts: should contain AFE and ASYS interrupts -- interrupt-names: should be "afe" and "asys" -- power-domains: should define the power domain -- clocks: Must contain an entry for each entry in clock-names - See ../clocks/clock-bindings.txt for details -- clock-names: should have these clock names: - "infra_sys_audio_clk", - "top_audio_mux1_sel", - "top_audio_mux2_sel", - "top_audio_a1sys_hp", - "top_audio_a2sys_hp", - "i2s0_src_sel", - "i2s1_src_sel", - "i2s2_src_sel", - "i2s3_src_sel", - "i2s0_src_div", - "i2s1_src_div", - "i2s2_src_div", - "i2s3_src_div", - "i2s0_mclk_en", - "i2s1_mclk_en", - "i2s2_mclk_en", - "i2s3_mclk_en", - "i2so0_hop_ck", - "i2so1_hop_ck", - "i2so2_hop_ck", - "i2so3_hop_ck", - "i2si0_hop_ck", - "i2si1_hop_ck", - "i2si2_hop_ck", - "i2si3_hop_ck", - "asrc0_out_ck", - "asrc1_out_ck", - "asrc2_out_ck", - "asrc3_out_ck", - "audio_afe_pd", - "audio_afe_conn_pd", - "audio_a1sys_pd", - "audio_a2sys_pd", - "audio_mrgif_pd"; -- assigned-clocks: list of input clocks and dividers for the audio system. - See ../clocks/clock-bindings.txt for details. -- assigned-clocks-parents: parent of input clocks of assigned clocks. -- assigned-clock-rates: list of clock frequencies of assigned clocks. - -Must be a subnode of MediaTek audsys device tree node. -See ../arm/mediatek/mediatek,audsys.txt for details about the parent node. - -Example: - - audsys: audio-subsystem@11220000 { - compatible = "mediatek,mt2701-audsys", "syscon"; - ... - - afe: audio-controller { - compatible = "mediatek,mt2701-audio"; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "afe", "asys"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; - - clocks = <&infracfg CLK_INFRA_AUDIO>, - <&topckgen CLK_TOP_AUD_MUX1_SEL>, - <&topckgen CLK_TOP_AUD_MUX2_SEL>, - <&topckgen CLK_TOP_AUD_48K_TIMING>, - <&topckgen CLK_TOP_AUD_44K_TIMING>, - <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, - <&topckgen CLK_TOP_AUD_I2S1_MCLK>, - <&topckgen CLK_TOP_AUD_I2S2_MCLK>, - <&topckgen CLK_TOP_AUD_I2S3_MCLK>, - <&topckgen CLK_TOP_AUD_I2S4_MCLK>, - <&audsys CLK_AUD_I2SO1>, - <&audsys CLK_AUD_I2SO2>, - <&audsys CLK_AUD_I2SO3>, - <&audsys CLK_AUD_I2SO4>, - <&audsys CLK_AUD_I2SIN1>, - <&audsys CLK_AUD_I2SIN2>, - <&audsys CLK_AUD_I2SIN3>, - <&audsys CLK_AUD_I2SIN4>, - <&audsys CLK_AUD_ASRCO1>, - <&audsys CLK_AUD_ASRCO2>, - <&audsys CLK_AUD_ASRCO3>, - <&audsys CLK_AUD_ASRCO4>, - <&audsys CLK_AUD_AFE>, - <&audsys CLK_AUD_AFE_CONN>, - <&audsys CLK_AUD_A1SYS>, - <&audsys CLK_AUD_A2SYS>, - <&audsys CLK_AUD_AFE_MRGIF>; - - clock-names = "infra_sys_audio_clk", - "top_audio_mux1_sel", - "top_audio_mux2_sel", - "top_audio_a1sys_hp", - "top_audio_a2sys_hp", - "i2s0_src_sel", - "i2s1_src_sel", - "i2s2_src_sel", - "i2s3_src_sel", - "i2s0_src_div", - "i2s1_src_div", - "i2s2_src_div", - "i2s3_src_div", - "i2s0_mclk_en", - "i2s1_mclk_en", - "i2s2_mclk_en", - "i2s3_mclk_en", - "i2so0_hop_ck", - "i2so1_hop_ck", - "i2so2_hop_ck", - "i2so3_hop_ck", - "i2si0_hop_ck", - "i2si1_hop_ck", - "i2si2_hop_ck", - "i2si3_hop_ck", - "asrc0_out_ck", - "asrc1_out_ck", - "asrc2_out_ck", - "asrc3_out_ck", - "audio_afe_pd", - "audio_afe_conn_pd", - "audio_a1sys_pd", - "audio_a2sys_pd", - "audio_mrgif_pd"; - - assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>, - <&topckgen CLK_TOP_AUD_MUX2_SEL>, - <&topckgen CLK_TOP_AUD_MUX1_DIV>, - <&topckgen CLK_TOP_AUD_MUX2_DIV>; - assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>, - <&topckgen CLK_TOP_AUD2PLL_90M>; - assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml index 3e54abd4ca74..054b53954ac3 100644 --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml @@ -89,6 +89,14 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 default: 3072000 + nuvoton,dmic-slew-rate: + description: The range 0 to 7 represents the speed of DMIC slew rate. + The lowest value 0 means the slowest rate and the highest value + 7 means the fastest rate. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 0 + nuvoton,left-input-single-end: description: Enable left input with single-ended settings if set. For the headset mic application, the single-ended control is @@ -127,6 +135,7 @@ examples: nuvoton,jack-insert-debounce = <7>; nuvoton,jack-eject-debounce = <0>; nuvoton,dmic-clk-threshold = <3072000>; + nuvoton,dmic-slew-rate = <0>; #sound-dai-cells = <0>; }; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml index ec4b0ac8ad68..b8540b30741e 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml @@ -11,12 +11,18 @@ maintainers: properties: compatible: - enum: - - qcom,sc7280-lpass-rx-macro - - qcom,sm8250-lpass-rx-macro - - qcom,sm8450-lpass-rx-macro - - qcom,sm8550-lpass-rx-macro - - qcom,sc8280xp-lpass-rx-macro + oneOf: + - enum: + - qcom,sc7280-lpass-rx-macro + - qcom,sm8250-lpass-rx-macro + - qcom,sm8450-lpass-rx-macro + - qcom,sm8550-lpass-rx-macro + - qcom,sc8280xp-lpass-rx-macro + - items: + - enum: + - qcom,sm8650-lpass-rx-macro + - qcom,x1e80100-lpass-rx-macro + - const: qcom,sm8550-lpass-rx-macro reg: maxItems: 1 @@ -96,8 +102,9 @@ allOf: - if: properties: compatible: - enum: - - qcom,sm8550-lpass-rx-macro + contains: + enum: + - qcom,sm8550-lpass-rx-macro then: properties: clocks: diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml index 962701e9eb42..3e2ae16c6aba 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml @@ -11,13 +11,19 @@ maintainers: properties: compatible: - enum: - - qcom,sc7280-lpass-tx-macro - - qcom,sm6115-lpass-tx-macro - - qcom,sm8250-lpass-tx-macro - - qcom,sm8450-lpass-tx-macro - - qcom,sm8550-lpass-tx-macro - - qcom,sc8280xp-lpass-tx-macro + oneOf: + - enum: + - qcom,sc7280-lpass-tx-macro + - qcom,sm6115-lpass-tx-macro + - qcom,sm8250-lpass-tx-macro + - qcom,sm8450-lpass-tx-macro + - qcom,sm8550-lpass-tx-macro + - qcom,sc8280xp-lpass-tx-macro + - items: + - enum: + - qcom,sm8650-lpass-tx-macro + - qcom,x1e80100-lpass-tx-macro + - const: qcom,sm8550-lpass-tx-macro reg: maxItems: 1 @@ -118,8 +124,9 @@ allOf: - if: properties: compatible: - enum: - - qcom,sm8550-lpass-tx-macro + contains: + enum: + - qcom,sm8550-lpass-tx-macro then: properties: clocks: diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml index 4a56108c444b..6b483fa3c428 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml @@ -11,12 +11,18 @@ maintainers: properties: compatible: - enum: - - qcom,sc7280-lpass-va-macro - - qcom,sm8250-lpass-va-macro - - qcom,sm8450-lpass-va-macro - - qcom,sm8550-lpass-va-macro - - qcom,sc8280xp-lpass-va-macro + oneOf: + - enum: + - qcom,sc7280-lpass-va-macro + - qcom,sm8250-lpass-va-macro + - qcom,sm8450-lpass-va-macro + - qcom,sm8550-lpass-va-macro + - qcom,sc8280xp-lpass-va-macro + - items: + - enum: + - qcom,sm8650-lpass-va-macro + - qcom,x1e80100-lpass-va-macro + - const: qcom,sm8550-lpass-va-macro reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml index eea7609d1b33..06b5f7be3608 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml @@ -11,12 +11,18 @@ maintainers: properties: compatible: - enum: - - qcom,sc7280-lpass-wsa-macro - - qcom,sm8250-lpass-wsa-macro - - qcom,sm8450-lpass-wsa-macro - - qcom,sm8550-lpass-wsa-macro - - qcom,sc8280xp-lpass-wsa-macro + oneOf: + - enum: + - qcom,sc7280-lpass-wsa-macro + - qcom,sm8250-lpass-wsa-macro + - qcom,sm8450-lpass-wsa-macro + - qcom,sm8550-lpass-wsa-macro + - qcom,sc8280xp-lpass-wsa-macro + - items: + - enum: + - qcom,sm8650-lpass-wsa-macro + - qcom,x1e80100-lpass-wsa-macro + - const: qcom,sm8550-lpass-wsa-macro reg: maxItems: 1 @@ -94,8 +100,9 @@ allOf: - if: properties: compatible: - enum: - - qcom,sm8550-lpass-wsa-macro + contains: + enum: + - qcom,sm8550-lpass-wsa-macro then: properties: clocks: diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index e082a4fe095d..6f419747273e 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -21,6 +21,11 @@ properties: - lenovo,yoga-c630-sndcard - qcom,db845c-sndcard - const: qcom,sdm845-sndcard + - items: + - enum: + - qcom,sm8550-sndcard + - qcom,sm8650-sndcard + - const: qcom,sm8450-sndcard - enum: - qcom,apq8016-sbc-sndcard - qcom,msm8916-qdsp6-sndcard @@ -30,6 +35,7 @@ properties: - qcom,sdm845-sndcard - qcom,sm8250-sndcard - qcom,sm8450-sndcard + - qcom,x1e80100-sndcard audio-routing: $ref: /schemas/types.yaml#/definitions/non-unique-string-array diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index 4df59f3b7b01..beb0ff0245b0 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -201,9 +201,9 @@ examples: - | codec@1,0{ compatible = "slim217,250"; - reg = <1 0>; + reg = <1 0>; reset-gpios = <&tlmm 64 0>; - slim-ifc-dev = <&wcd9340_ifd>; + slim-ifc-dev = <&wcd9340_ifd>; #sound-dai-cells = <1>; interrupt-parent = <&tlmm>; interrupts = <54 4>; diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml index b430dd3e1841..7b31bf93f1a1 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml @@ -51,7 +51,7 @@ examples: reg = <0x03210000 0x2000>; wcd938x_rx: codec@0,4 { compatible = "sdw20217010d00"; - reg = <0 4>; + reg = <0 4>; qcom,rx-port-mapping = <1 2 3 4 5>; }; }; @@ -62,7 +62,7 @@ examples: reg = <0x03230000 0x2000>; wcd938x_tx: codec@0,3 { compatible = "sdw20217010d00"; - reg = <0 3>; + reg = <0 3>; qcom,tx-port-mapping = <2 3 4 5>; }; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml index 018565793a3e..adbfa67f88ed 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml @@ -137,7 +137,7 @@ examples: reg = <0x03210000 0x2000>; wcd938x_rx: codec@0,4 { compatible = "sdw20217010d00"; - reg = <0 4>; + reg = <0 4>; qcom,rx-port-mapping = <1 2 3 4 5>; }; }; @@ -148,7 +148,7 @@ examples: reg = <0x03230000 0x2000>; wcd938x_tx: codec@0,3 { compatible = "sdw20217010d00"; - reg = <0 3>; + reg = <0 3>; qcom,tx-port-mapping = <2 3 4 5>; }; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml index ba572a7f4f3c..8e462cdf0018 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml @@ -52,7 +52,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - soundwire-controller@3250000 { + soundwire@3250000 { #address-cells = <2>; #size-cells = <0>; reg = <0x3250000 0x2000>; diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml index e6723c9e312a..d717017b0fdb 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml @@ -48,7 +48,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - soundwire-controller { + soundwire { #address-cells = <2>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index 13a5a0a10fe6..0d7a6b576d88 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -9,20 +9,6 @@ title: Renesas R-Car Sound Driver maintainers: - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> -definitions: - port-def: - $ref: audio-graph-port.yaml#/definitions/port-base - unevaluatedProperties: false - patternProperties: - "^endpoint(@[0-9a-f]+)?": - $ref: audio-graph-port.yaml#/definitions/endpoint-base - properties: - playback: - $ref: /schemas/types.yaml#/definitions/phandle-array - capture: - $ref: /schemas/types.yaml#/definitions/phandle-array - unevaluatedProperties: false - properties: compatible: @@ -125,7 +111,17 @@ properties: # ports is below port: - $ref: "#/definitions/port-def" + $ref: audio-graph-port.yaml#/definitions/port-base + unevaluatedProperties: false + patternProperties: + "^endpoint(@[0-9a-f]+)?": + $ref: audio-graph-port.yaml#/definitions/endpoint-base + properties: + playback: + $ref: /schemas/types.yaml#/definitions/phandle-array + capture: + $ref: /schemas/types.yaml#/definitions/phandle-array + unevaluatedProperties: false rcar_sound,dvc: description: DVC subnode. @@ -269,7 +265,7 @@ patternProperties: unevaluatedProperties: false patternProperties: '^port(@[0-9a-f]+)?$': - $ref: "#/definitions/port-def" + $ref: "#/properties/port" required: - compatible @@ -501,19 +497,19 @@ examples: rcar_sound,dai { dai0 { playback = <&ssi5>, <&src5>; - capture = <&ssi6>; + capture = <&ssi6>; }; dai1 { playback = <&ssi3>; }; dai2 { - capture = <&ssi4>; + capture = <&ssi4>; }; dai3 { playback = <&ssi7>; }; dai4 { - capture = <&ssi8>; + capture = <&ssi8>; }; }; @@ -527,7 +523,7 @@ examples: frame-master = <&rsnd_endpoint0>; playback = <&ssi0>, <&src0>, <&dvc0>; - capture = <&ssi1>, <&src1>, <&dvc1>; + capture = <&ssi1>, <&src1>, <&dvc1>; }; }; }; diff --git a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml index 3b5ae45eee4a..8b9695f5decc 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml @@ -16,7 +16,7 @@ properties: compatible: items: - enum: - - renesas,r9a07g043-ssi # RZ/G2UL + - renesas,r9a07g043-ssi # RZ/G2UL and RZ/Five - renesas,r9a07g044-ssi # RZ/G2{L,LC} - renesas,r9a07g054-ssi # RZ/V2L - const: renesas,rz-ssi diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml index 30b3b6e9824b..f45f73b5056d 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml @@ -44,13 +44,18 @@ properties: frequencies supported by Exynos7 I2S and 7.1 channel TDM support for playback and capture TDM (Time division multiplexing) to allow transfer of multiple channel audio data on single data line. - enum: - - samsung,s3c6410-i2s - - samsung,s5pv210-i2s - - samsung,exynos5420-i2s - - samsung,exynos7-i2s - - samsung,exynos7-i2s1 - - tesla,fsd-i2s + oneOf: + - enum: + - samsung,s3c6410-i2s + - samsung,s5pv210-i2s + - samsung,exynos5420-i2s + - samsung,exynos7-i2s + - samsung,exynos7-i2s1 + - tesla,fsd-i2s + - items: + - enum: + - samsung,exynos5433-i2s + - const: samsung,exynos7-i2s '#address-cells': const: 1 diff --git a/Documentation/devicetree/bindings/sound/sound-card-common.yaml b/Documentation/devicetree/bindings/sound/sound-card-common.yaml index 3a941177f684..721950f65748 100644 --- a/Documentation/devicetree/bindings/sound/sound-card-common.yaml +++ b/Documentation/devicetree/bindings/sound/sound-card-common.yaml @@ -17,6 +17,13 @@ properties: pair of strings, the first being the connection's sink, the second being the connection's source. + ignore-suspend-widgets: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: | + A list of audio sound widgets which are marked ignoring system suspend. + Paths between these endpoints are still active over suspend of the main + application processor that the current operating system is running. + model: $ref: /schemas/types.yaml#/definitions/string description: User specified audio sound card name diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml index a7cc9aa34468..4783e6dbb5c4 100644 --- a/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml @@ -90,7 +90,7 @@ examples: ldoin-supply = <®_3v3>; clocks = <&clks 201>; clock-names = "mclk"; - aic32x4-gpio-func= < + aic32x4-gpio-func = < 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ 0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */ diff --git a/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.txt b/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.txt deleted file mode 100644 index 8a18d71e6879..000000000000 --- a/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.txt +++ /dev/null @@ -1,31 +0,0 @@ -Analog Devices AXI SPI Engine controller Device Tree Bindings - -Required properties: -- compatible : Must be "adi,axi-spi-engine-1.00.a"" -- reg : Physical base address and size of the register map. -- interrupts : Property with a value describing the interrupt - number. -- clock-names : List of input clock names - "s_axi_aclk", "spi_clk" -- clocks : Clock phandles and specifiers (See clock bindings for - details on clock-names and clocks). -- #address-cells : Must be <1> -- #size-cells : Must be <0> - -Optional subnodes: - Subnodes are use to represent the SPI slave devices connected to the SPI - master. They follow the generic SPI bindings as outlined in spi-bus.txt. - -Example: - - spi@@44a00000 { - compatible = "adi,axi-spi-engine-1.00.a"; - reg = <0x44a00000 0x1000>; - interrupts = <0 56 4>; - clocks = <&clkc 15 &clkc 15>; - clock-names = "s_axi_aclk", "spi_clk"; - - #address-cells = <1>; - #size-cells = <0>; - - /* SPI devices */ - }; diff --git a/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.yaml b/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.yaml new file mode 100644 index 000000000000..d48faa42d025 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/adi,axi-spi-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AXI SPI Engine Controller + +description: | + The AXI SPI Engine controller is part of the SPI Engine framework[1] and + allows memory mapped access to the SPI Engine control bus. This allows it + to be used as a general purpose software driven SPI controller as well as + some optional advanced acceleration and offloading capabilities. + + [1] https://wiki.analog.com/resources/fpga/peripherals/spi_engine + +maintainers: + - Michael Hennerich <Michael.Hennerich@analog.com> + - Nuno Sá <nuno.sa@analog.com> + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + const: adi,axi-spi-engine-1.00.a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The AXI interconnect clock. + - description: The SPI controller clock. + + clock-names: + items: + - const: s_axi_aclk + - const: spi_clk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + spi@44a00000 { + compatible = "adi,axi-spi-engine-1.00.a"; + reg = <0x44a00000 0x1000>; + interrupts = <0 56 4>; + clocks = <&clkc 15>, <&clkc 15>; + clock-names = "s_axi_aclk", "spi_clk"; + + #address-cells = <1>; + #size-cells = <0>; + + /* SPI devices */ + }; diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml index 4d8ec69214c9..0ef3f8421986 100644 --- a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml @@ -21,7 +21,7 @@ properties: - enum: - renesas,rspi-r7s72100 # RZ/A1H - renesas,rspi-r7s9210 # RZ/A2 - - renesas,r9a07g043-rspi # RZ/G2UL + - renesas,r9a07g043-rspi # RZ/G2UL and RZ/Five - renesas,r9a07g044-rspi # RZ/G2{L,LC} - renesas,r9a07g054-rspi # RZ/V2L - const: renesas,rspi-rz diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index 6348a387a21c..fde3776a558b 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -72,8 +72,6 @@ properties: - const: snps,dw-apb-ssi - description: Intel Keem Bay SPI Controller const: intel,keembay-ssi - - description: Intel Thunder Bay SPI Controller - const: intel,thunderbay-ssi - description: Intel Mount Evans Integrated Management Complex SPI Controller const: intel,mountevans-imc-ssi - description: AMD Pensando Elba SoC SPI Controller diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index ae0f082bd377..4bd9aeb81208 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -23,7 +23,9 @@ properties: compatible: enum: - st,stm32f4-spi + - st,stm32f7-spi - st,stm32h7-spi + - st,stm32mp25-spi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml index fbd4212285e2..9b2272a9ec15 100644 --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -16,6 +16,7 @@ properties: - allwinner,sun8i-a83t-ths - allwinner,sun8i-h3-ths - allwinner,sun8i-r40-ths + - allwinner,sun20i-d1-ths - allwinner,sun50i-a64-ths - allwinner,sun50i-a100-ths - allwinner,sun50i-h5-ths @@ -61,6 +62,7 @@ allOf: compatible: contains: enum: + - allwinner,sun20i-d1-ths - allwinner,sun50i-a100-ths - allwinner,sun50i-h6-ths @@ -84,7 +86,9 @@ allOf: properties: compatible: contains: - const: allwinner,sun8i-h3-ths + enum: + - allwinner,sun8i-h3-ths + - allwinner,sun20i-d1-ths then: properties: @@ -103,6 +107,7 @@ allOf: enum: - allwinner,sun8i-h3-ths - allwinner,sun8i-r40-ths + - allwinner,sun20i-d1-ths - allwinner,sun50i-a64-ths - allwinner,sun50i-a100-ths - allwinner,sun50i-h5-ths diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml index 7538469997f9..b634f57cd011 100644 --- a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml @@ -10,6 +10,9 @@ maintainers: - zhanghongchen <zhanghongchen@loongson.cn> - Yinbo Zhu <zhuyinbo@loongson.cn> +allOf: + - $ref: /schemas/thermal/thermal-sensor.yaml# + properties: compatible: oneOf: @@ -26,12 +29,16 @@ properties: interrupts: maxItems: 1 + '#thermal-sensor-cells': + const: 1 + required: - compatible - reg - interrupts + - '#thermal-sensor-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -41,4 +48,5 @@ examples: reg = <0x1fe01500 0x30>; interrupt-parent = <&liointc0>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml new file mode 100644 index 000000000000..d96a2e32bd8f --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek thermal controller for on-SoC temperatures + +maintainers: + - Sascha Hauer <s.hauer@pengutronix.de> + +description: + This device does not have its own ADC, instead it directly controls the AUXADC + via AHB bus accesses. For this reason it needs phandles to the AUXADC. Also it + controls a mux in the apmixedsys register space via AHB bus accesses, so a + phandle to the APMIXEDSYS is also needed. + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + enum: + - mediatek,mt2701-thermal + - mediatek,mt2712-thermal + - mediatek,mt7622-thermal + - mediatek,mt7981-thermal + - mediatek,mt7986-thermal + - mediatek,mt8173-thermal + - mediatek,mt8183-thermal + - mediatek,mt8365-thermal + - mediatek,mt8516-thermal + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Main clock needed for register access + - description: The AUXADC clock + + clock-names: + items: + - const: therm + - const: auxadc + + mediatek,auxadc: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the AUXADC which the thermal controller uses + + mediatek,apmixedsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the APMIXEDSYS controller + + resets: + description: Reset controller controlling the thermal controller + + nvmem-cells: + items: + - description: + NVMEM cell with EEPROMA phandle to the calibration data provided by an + NVMEM device. If unspecified default values shall be used. + + nvmem-cell-names: + items: + - const: calibration-data + +required: + - reg + - interrupts + - clocks + - clock-names + - mediatek,auxadc + - mediatek,apmixedsys + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/reset/mt8173-resets.h> + + thermal@1100b000 { + compatible = "mediatek,mt8173-thermal"; + reg = <0x1100b000 0x1000>; + interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&pericfg MT8173_PERI_THERM_SW_RST>; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + nvmem-cells = <&thermal_calibration_data>; + nvmem-cell-names = "calibration-data"; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt deleted file mode 100644 index ac39c7156fde..000000000000 --- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Mediatek Thermal - -This describes the device tree binding for the Mediatek thermal controller -which measures the on-SoC temperatures. This device does not have its own ADC, -instead it directly controls the AUXADC via AHB bus accesses. For this reason -this device needs phandles to the AUXADC. Also it controls a mux in the -apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS -is also needed. - -Required properties: -- compatible: - - "mediatek,mt8173-thermal" : For MT8173 family of SoCs - - "mediatek,mt2701-thermal" : For MT2701 family of SoCs - - "mediatek,mt2712-thermal" : For MT2712 family of SoCs - - "mediatek,mt7622-thermal" : For MT7622 SoC - - "mediatek,mt7981-thermal", "mediatek,mt7986-thermal" : For MT7981 SoC - - "mediatek,mt7986-thermal" : For MT7986 SoC - - "mediatek,mt8183-thermal" : For MT8183 family of SoCs - - "mediatek,mt8365-thermal" : For MT8365 family of SoCs - - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs -- reg: Address range of the thermal controller -- interrupts: IRQ for the thermal controller -- clocks, clock-names: Clocks needed for the thermal controller. required - clocks are: - "therm": Main clock needed for register access - "auxadc": The AUXADC clock -- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses -- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller. -- #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. - -Optional properties: -- resets: Reference to the reset controller controlling the thermal controller. -- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If - unspecified default values shall be used. -- nvmem-cell-names: Should be "calibration-data" - -Example: - - thermal: thermal@1100b000 { - #thermal-sensor-cells = <1>; - compatible = "mediatek,mt8173-thermal"; - reg = <0 0x1100b000 0 0x1000>; - interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; - clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; - clock-names = "therm", "auxadc"; - resets = <&pericfg MT8173_PERI_THERM_SW_RST>; - reset-names = "therm"; - mediatek,auxadc = <&auxadc>; - mediatek,apmixedsys = <&apmixedsys>; - nvmem-cells = <&thermal_calibration_data>; - nvmem-cell-names = "calibration-data"; - }; diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml index 01253d58bf9f..7541e27704ca 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml @@ -114,12 +114,14 @@ examples: - | #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> - spmi_bus { + + pmic { #address-cells = <1>; #size-cells = <0>; + pm8998_adc: adc@3100 { - reg = <0x3100>; compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; @@ -130,7 +132,7 @@ examples: }; }; - pm8998_adc_tm: adc-tm@3400 { + adc-tm@3400 { compatible = "qcom,spmi-adc-tm-hc"; reg = <0x3400>; interrupts = <0x2 0x34 0x0 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml index 3c81def03c84..d9d2657287cb 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml @@ -167,12 +167,14 @@ examples: - | #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> - spmi_bus { + + pmic { #address-cells = <1>; #size-cells = <0>; + pm8150b_adc: adc@3100 { - reg = <0x3100>; compatible = "qcom,spmi-adc5"; + reg = <0x3100>; #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; @@ -186,7 +188,7 @@ examples: }; }; - pm8150b_adc_tm: adc-tm@3500 { + adc-tm@3500 { compatible = "qcom,spmi-adc-tm5"; reg = <0x3500>; interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; @@ -207,12 +209,14 @@ examples: #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> #include <dt-bindings/interrupt-controller/irq.h> - spmi_bus { + + pmic { #address-cells = <1>; #size-cells = <0>; + pmk8350_vadc: adc@3100 { - reg = <0x3100>; compatible = "qcom,spmi-adc7"; + reg = <0x3100>; #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; @@ -233,7 +237,7 @@ examples: }; }; - pmk8350_adc_tm: adc-tm@3400 { + adc-tm@3400 { compatible = "qcom,spmi-adc-tm5-gen2"; reg = <0x3400>; interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 437b74732886..99d9c526c0b6 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -66,6 +66,7 @@ properties: - qcom,sm8350-tsens - qcom,sm8450-tsens - qcom,sm8550-tsens + - qcom,sm8650-tsens - const: qcom,tsens-v2 - description: v2 of TSENS with combined interrupt diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 4a8dabc48170..dbd52620d293 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -75,6 +75,22 @@ patternProperties: framework and assumes that the thermal sensors in this zone support interrupts. + critical-action: + $ref: /schemas/types.yaml#/definitions/string + description: | + The action the OS should perform after the critical temperature is reached. + By default the system will shutdown as a safe action to prevent damage + to the hardware, if the property is not set. + The shutdown action should be always the default and preferred one. + Choose 'reboot' with care, as the hardware may be in thermal stress, + thus leading to infinite reboots that may cause damage to the hardware. + Make sure the firmware/bootloader will act as the last resort and take + over the thermal control. + + enum: + - shutdown + - reboot + thermal-sensors: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml index e8be6c470364..4b6c20fc8194 100644 --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -38,6 +38,7 @@ properties: - enum: - allwinner,sun20i-d1-clint - sophgo,cv1800b-clint + - sophgo,cv1812h-clint - thead,th1520-clint - const: thead,c900-clint - items: diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index c3190f2a168a..a5fb2fa22026 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -117,6 +117,10 @@ properties: - fsl,mpl3115 # MPR121: Proximity Capacitive Touch Sensor Controller - fsl,mpr121 + # Monolithic Power Systems Inc. multi-phase controller mp2856 + - mps,mp2856 + # Monolithic Power Systems Inc. multi-phase controller mp2857 + - mps,mp2857 # Monolithic Power Systems Inc. multi-phase controller mp2888 - mps,mp2888 # Monolithic Power Systems Inc. multi-phase controller mp2971 @@ -125,6 +129,8 @@ properties: - mps,mp2973 # Monolithic Power Systems Inc. multi-phase controller mp2975 - mps,mp2975 + # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990 + - mps,mp5990 # Honeywell Humidicon HIH-6130 humidity/temperature sensor - honeywell,hi6130 # IBM Common Form Factor Power Supply Versions (all versions) diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml index 462ead5a1cec..10c146424baa 100644 --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml @@ -27,6 +27,7 @@ properties: - qcom,msm8996-ufshc - qcom,msm8998-ufshc - qcom,sa8775p-ufshc + - qcom,sc7280-ufshc - qcom,sc8280xp-ufshc - qcom,sdm845-ufshc - qcom,sm6115-ufshc @@ -36,6 +37,7 @@ properties: - qcom,sm8350-ufshc - qcom,sm8450-ufshc - qcom,sm8550-ufshc + - qcom,sm8650-ufshc - const: qcom,ufshc - const: jedec,ufs-2.0 @@ -117,11 +119,13 @@ allOf: enum: - qcom,msm8998-ufshc - qcom,sa8775p-ufshc + - qcom,sc7280-ufshc - qcom,sc8280xp-ufshc - qcom,sm8250-ufshc - qcom,sm8350-ufshc - qcom,sm8450-ufshc - qcom,sm8550-ufshc + - qcom,sm8650-ufshc then: properties: clocks: diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml index 985ea8f64de8..31fe7f30ff5b 100644 --- a/Documentation/devicetree/bindings/ufs/ufs-common.yaml +++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml @@ -87,6 +87,8 @@ properties: description: Specifies max. load that can be drawn from VCCQ2 supply. + msi-parent: true + dependencies: freq-table-hz: [ clocks ] operating-points-v2: [ clocks, clock-names ] diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml index ff3a1707ef57..6d4cfd943f58 100644 --- a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml +++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml @@ -36,7 +36,11 @@ properties: vdd-supply: description: - VDD power supply to the hub + 3V3 power supply to the hub + + vdd2-supply: + description: + 1V2 power supply to the hub peer-hub: $ref: /schemas/types.yaml#/definitions/phandle @@ -62,6 +66,7 @@ allOf: properties: reset-gpios: false vdd-supply: false + vdd2-supply: false peer-hub: false i2c-bus: false else: diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index e889158ca205..915c8205623b 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -521,8 +521,8 @@ examples: interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index 692dd60e3f73..45a19d4928af 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -41,7 +41,7 @@ examples: - | usb { phys = <&usb2_phy1>, <&usb3_phy1>; - phy-names = "usb"; + phy-names = "usb2", "usb3"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 309b94c328c8..100fbf9826dc 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -294,6 +294,8 @@ patternProperties: description: CompuLab Ltd. "^congatec,.*": description: congatec GmbH + "^coolpi,.*": + description: cool-pi.com "^coreriver,.*": description: CORERIVER Semiconductor Co.,Ltd. "^corpro,.*": @@ -352,6 +354,8 @@ patternProperties: description: Digi International Inc. "^digilent,.*": description: Diglent, Inc. + "^dimonoff,.*": + description: Dimonoff inc. "^diodes,.*": description: Diodes, Inc. "^dioo,.*": @@ -474,6 +478,8 @@ patternProperties: description: Fairphone B.V. "^faraday,.*": description: Faraday Technology Corporation + "^fascontek,.*": + description: Fascontek "^fastrax,.*": description: Fastrax Oy "^fcs,.*": @@ -597,6 +603,8 @@ patternProperties: description: Hewlett Packard Enterprise "^hsg,.*": description: HannStar Display Co. + "^htc,.*": + description: HTC Corporation "^huawei,.*": description: Huawei Technologies Co., Ltd. "^hugsun,.*": @@ -1179,6 +1187,8 @@ patternProperties: description: Shenzhen Roofull Technology Co, Ltd "^roseapplepi,.*": description: RoseapplePi.org + "^rve,.*": + description: Recharge Véhicule Électrique (RVE) inc. "^saef,.*": description: Saef Technology Limited "^samsung,.*": @@ -1434,6 +1444,8 @@ patternProperties: description: TPO "^tq,.*": description: TQ-Systems GmbH + "^transpeed,.*": + description: Transpeed "^traverse,.*": description: Traverse Technologies Australia Pty Ltd "^tronfy,.*": diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml index 274519fc24fd..64c8f7393809 100644 --- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml @@ -6,13 +6,13 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Allwinner A10 Watchdog -allOf: - - $ref: watchdog.yaml# - maintainers: - Chen-Yu Tsai <wens@csie.org> - Maxime Ripard <mripard@kernel.org> +allOf: + - $ref: watchdog.yaml# + properties: compatible: oneOf: diff --git a/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml b/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml index fea84f5b7e6d..6425fe51d20c 100644 --- a/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml @@ -6,12 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Alphascale asm9260 Watchdog timer -allOf: - - $ref: watchdog.yaml# - maintainers: - Oleksij Rempel <linux@rempel-privat.de> +allOf: + - $ref: watchdog.yaml# + properties: compatible: const: alphascale,asm9260-wdt diff --git a/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml b/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml index 929681127df0..21872e15916c 100644 --- a/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml @@ -6,12 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Apple SoC Watchdog -allOf: - - $ref: watchdog.yaml# - maintainers: - Sven Peter <sven@svenpeter.dev> +allOf: + - $ref: watchdog.yaml# + properties: compatible: items: diff --git a/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml b/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml index b5573852ef5a..8e9d0b7e8244 100644 --- a/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml @@ -6,12 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Secure Monitor Call based watchdog -allOf: - - $ref: watchdog.yaml# - maintainers: - Julius Werner <jwerner@chromium.org> +allOf: + - $ref: watchdog.yaml# + properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml index 526ff908d134..e898167ef628 100644 --- a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml @@ -6,14 +6,14 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: BCM63xx and BCM7038 watchdog timer -allOf: - - $ref: watchdog.yaml# - maintainers: - Florian Fainelli <f.fainelli@gmail.com> - Justin Chen <justinpopo6@gmail.com> - Rafał Miłecki <rafal@milecki.pl> +allOf: + - $ref: watchdog.yaml# + properties: compatible: enum: @@ -29,11 +29,11 @@ properties: The clock running the watchdog. If no clock is found the driver will default to 27000000 Hz. -unevaluatedProperties: false - required: - reg +unevaluatedProperties: false + examples: - | watchdog@f040a7e8 { diff --git a/Documentation/devicetree/bindings/watchdog/cnxt,cx92755-wdt.yaml b/Documentation/devicetree/bindings/watchdog/cnxt,cx92755-wdt.yaml index 1844d7e026fe..13236ee61f6f 100644 --- a/Documentation/devicetree/bindings/watchdog/cnxt,cx92755-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/cnxt,cx92755-wdt.yaml @@ -12,12 +12,12 @@ description: | timer counters. The first timer (called "Timer A") is the only one that can be used as watchdog. -allOf: - - $ref: watchdog.yaml# - maintainers: - Baruch Siach <baruch@tkos.co.il> +allOf: + - $ref: watchdog.yaml# + properties: compatible: const: cnxt,cx92755-wdt diff --git a/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml b/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml index f058628bb632..c8f698120597 100644 --- a/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml +++ b/Documentation/devicetree/bindings/watchdog/dlg,da9062-watchdog.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/watchdog/dlg,da9062-watchdog.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Dialog Semiconductor DA9062/61 Watchdog Timer +title: Dialog Semiconductor DA906{1,2,3} Watchdog Timer maintainers: - Steve Twiss <stwiss.opensource@diasemi.com> @@ -14,9 +14,13 @@ allOf: properties: compatible: - enum: - - dlg,da9061-watchdog - - dlg,da9062-watchdog + oneOf: + - enum: + - dlg,da9062-watchdog + - dlg,da9063-watchdog + - items: + - const: dlg,da9061-watchdog + - const: dlg,da9062-watchdog dlg,use-sw-pm: type: boolean diff --git a/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml b/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml index 1437ff8a122f..8231dde2bfa6 100644 --- a/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml @@ -9,6 +9,9 @@ title: Intel Keem Bay SoC non-secure Watchdog Timer maintainers: - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> +allOf: + - $ref: watchdog.yaml# + properties: compatible: enum: @@ -37,7 +40,7 @@ required: - interrupt-names - clocks -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml index 1a6490c43d89..442c21f12a3b 100644 --- a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml +++ b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml @@ -6,14 +6,14 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim 63xx Watchdog Timers -allOf: - - $ref: watchdog.yaml# - - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# - maintainers: - Marc Zyngier <maz@kernel.org> - Linus Walleij <linus.walleij@linaro.org> +allOf: + - $ref: watchdog.yaml# + - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# + properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml index cc502838bc39..8d2520241e37 100644 --- a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml @@ -25,6 +25,7 @@ properties: - mediatek,mt6735-wdt - mediatek,mt6795-wdt - mediatek,mt7986-wdt + - mediatek,mt7988-wdt - mediatek,mt8183-wdt - mediatek,mt8186-wdt - mediatek,mt8188-wdt diff --git a/Documentation/devicetree/bindings/watchdog/nxp,pnx4008-wdt.yaml b/Documentation/devicetree/bindings/watchdog/nxp,pnx4008-wdt.yaml new file mode 100644 index 000000000000..35ef940cbabe --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/nxp,pnx4008-wdt.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/nxp,pnx4008-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PNX watchdog timer + +maintainers: + - Roland Stigge <stigge@antcom.de> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + const: nxp,pnx4008-wdt + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + watchdog@4003c000 { + compatible = "nxp,pnx4008-wdt"; + reg = <0x4003c000 0x1000>; + timeout-sec = <10>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt deleted file mode 100644 index 4b76bec62af9..000000000000 --- a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt +++ /dev/null @@ -1,17 +0,0 @@ -* NXP PNX watchdog timer - -Required properties: -- compatible: must be "nxp,pnx4008-wdt" -- reg: physical base address of the controller and length of memory mapped - region. - -Optional properties: -- timeout-sec: contains the watchdog timeout in seconds. - -Example: - - watchdog@4003c000 { - compatible = "nxp,pnx4008-wdt"; - reg = <0x4003C000 0x1000>; - timeout-sec = <10>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/qca,ar7130-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qca,ar7130-wdt.yaml new file mode 100644 index 000000000000..82040ca10eda --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/qca,ar7130-wdt.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/qca,ar7130-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros AR7130 Watchdog Timer (WDT) Controller + +maintainers: + - Gabor Juhos <juhosg@openwrt.org> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + const: qca,ar7130-wdt + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + watchdog@18060008 { + compatible = "qca,ar7130-wdt"; + reg = <0x18060008 0x8>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/qca-ar7130-wdt.txt b/Documentation/devicetree/bindings/watchdog/qca-ar7130-wdt.txt deleted file mode 100644 index 7a89e5f85415..000000000000 --- a/Documentation/devicetree/bindings/watchdog/qca-ar7130-wdt.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Qualcomm Atheros AR7130 Watchdog Timer (WDT) Controller - -Required properties: -- compatible: must be "qca,ar7130-wdt" -- reg: physical base address of the controller and length of memory mapped - region. - -Example: - -wdt@18060008 { - compatible = "qca,ar9330-wdt", "qca,ar7130-wdt"; - reg = <0x18060008 0x8>; -}; diff --git a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml index 568eb8480fc3..dc6af204e8af 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml @@ -30,22 +30,27 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> - pmic@0 { - compatible = "qcom,pm8916", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - #address-cells = <1>; + spmi { + #address-cells = <2>; #size-cells = <0>; - pon@800 { - compatible = "qcom,pm8916-pon"; - reg = <0x800>; - mode-bootloader = <0x2>; - mode-recovery = <0x1>; - - watchdog { - compatible = "qcom,pm8916-wdt"; - interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>; - timeout-sec = <60>; + pmic@0 { + compatible = "qcom,pm8916", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + watchdog { + compatible = "qcom,pm8916-wdt"; + interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>; + timeout-sec = <60>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml index c12bc852aedc..a4f35c598cdb 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -123,7 +123,7 @@ examples: compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt"; reg = <0x17c10000 0x1000>; clocks = <&sleep_clk>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; timeout-sec = <10>; }; diff --git a/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt b/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt deleted file mode 100644 index 05653054bd5b..000000000000 --- a/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt +++ /dev/null @@ -1,17 +0,0 @@ -Realtek RTD1295 Watchdog -======================== - -Required properties: - -- compatible : Should be "realtek,rtd1295-watchdog" -- reg : Specifies the physical base address and size of registers -- clocks : Specifies one clock input - - -Example: - - watchdog@98007680 { - compatible = "realtek,rtd1295-watchdog"; - reg = <0x98007680 0x100>; - clocks = <&osc27M>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/realtek,rtd1295-watchdog.yaml b/Documentation/devicetree/bindings/watchdog/realtek,rtd1295-watchdog.yaml new file mode 100644 index 000000000000..2a0ea1696317 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/realtek,rtd1295-watchdog.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/realtek,rtd1295-watchdog.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek RTD1295 Watchdog + +maintainers: + - Andreas Färber <afaerber@suse.de> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + const: realtek,rtd1295-watchdog + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + watchdog@98007680 { + compatible = "realtek,rtd1295-watchdog"; + reg = <0x98007680 0x100>; + clocks = <&osc27M>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml index 8fb6656ba0c2..77a5ddd0426e 100644 --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml @@ -16,14 +16,20 @@ description: |+ properties: compatible: - enum: - - samsung,s3c2410-wdt # for S3C2410 - - samsung,s3c6410-wdt # for S3C6410, S5PV210 and Exynos4 - - samsung,exynos5250-wdt # for Exynos5250 - - samsung,exynos5420-wdt # for Exynos5420 - - samsung,exynos7-wdt # for Exynos7 - - samsung,exynos850-wdt # for Exynos850 - - samsung,exynosautov9-wdt # for Exynosautov9 + oneOf: + - enum: + - google,gs101-wdt # for Google gs101 + - samsung,s3c2410-wdt # for S3C2410 + - samsung,s3c6410-wdt # for S3C6410, S5PV210 and Exynos4 + - samsung,exynos5250-wdt # for Exynos5250 + - samsung,exynos5420-wdt # for Exynos5420 + - samsung,exynos7-wdt # for Exynos7 + - samsung,exynos850-wdt # for Exynos850 + - samsung,exynosautov9-wdt # for Exynosautov9 + - items: + - enum: + - tesla,fsd-wdt + - const: samsung,exynos7-wdt reg: maxItems: 1 @@ -42,13 +48,14 @@ properties: samsung,cluster-index: $ref: /schemas/types.yaml#/definitions/uint32 description: - Index of CPU cluster on which watchdog is running (in case of Exynos850) + Index of CPU cluster on which watchdog is running (in case of Exynos850 + or Google gs101). samsung,syscon-phandle: $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the PMU system controller node (in case of Exynos5250, - Exynos5420, Exynos7 and Exynos850). + Exynos5420, Exynos7, Exynos850 and gs101). required: - compatible @@ -64,6 +71,7 @@ allOf: compatible: contains: enum: + - google,gs101-wdt - samsung,exynos5250-wdt - samsung,exynos5420-wdt - samsung,exynos7-wdt @@ -77,6 +85,7 @@ allOf: compatible: contains: enum: + - google,gs101-wdt - samsung,exynos850-wdt - samsung,exynosautov9-wdt then: diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml index 76eceeddd150..c7aab0418a32 100644 --- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml @@ -6,12 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Synopsys Designware Watchdog Timer -allOf: - - $ref: watchdog.yaml# - maintainers: - Jamie Iles <jamie@jamieiles.com> +allOf: + - $ref: watchdog.yaml# + properties: compatible: oneOf: @@ -73,13 +73,13 @@ properties: minItems: 16 maxItems: 16 -unevaluatedProperties: false - required: - compatible - reg - clocks +unevaluatedProperties: false + examples: - | watchdog@ffd02000 { diff --git a/Documentation/devicetree/bindings/watchdog/technologic,ts7200-wdt.yaml b/Documentation/devicetree/bindings/watchdog/technologic,ts7200-wdt.yaml new file mode 100644 index 000000000000..7e4bfef152f8 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/technologic,ts7200-wdt.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/technologic,ts7200-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Technologic Systems TS-72xx based SBCs watchdog + +maintainers: + - Nikita Shubin <nikita.shubin@maquefel.me> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + oneOf: + - const: technologic,ts7200-wdt + - items: + - enum: + - technologic,ts7300-wdt + - technologic,ts7260-wdt + - technologic,ts7250-wdt + - const: technologic,ts7200-wdt + + reg: + items: + - description: control register + - description: feed register + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + watchdog@23800000 { + compatible = "technologic,ts7200-wdt"; + reg = <0x23800000 0x01>, <0x23c00000 0x01>; + timeout-sec = <30>; + }; + +... |