diff options
Diffstat (limited to 'Documentation/devicetree')
17 files changed, 50 insertions, 52 deletions
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 6e5cef0ed6fb..50daa0b3b032 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -17,7 +17,11 @@ extra-y += $(DT_TMP_SCHEMA) quiet_cmd_mk_schema = SCHEMA $@ cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(filter-out FORCE, $^) -DT_DOCS = $(shell cd $(srctree)/$(src) && find * -name '*.yaml') +DT_DOCS = $(shell \ + cd $(srctree)/$(src) && \ + find * \( -name '*.yaml' ! -name $(DT_TMP_SCHEMA) \) \ + ) + DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS)) extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt b/Documentation/devicetree/bindings/arm/cpu-capacity.txt index 84262cdb8d29..96fa46cb133c 100644 --- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt +++ b/Documentation/devicetree/bindings/arm/cpu-capacity.txt @@ -235,4 +235,4 @@ cpus { =========================================== [1] ARM Linux Kernel documentation - CPUs bindings - Documentation/devicetree/bindings/arm/cpus.txt + Documentation/devicetree/bindings/arm/cpus.yaml diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index 8f0937db55c5..45730ba60af5 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -684,7 +684,7 @@ cpus { =========================================== [1] ARM Linux Kernel documentation - CPUs bindings - Documentation/devicetree/bindings/arm/cpus.txt + Documentation/devicetree/bindings/arm/cpus.yaml [2] ARM Linux Kernel documentation - PSCI bindings Documentation/devicetree/bindings/arm/psci.txt diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt index 1b2ab1ff5587..46652bf65147 100644 --- a/Documentation/devicetree/bindings/arm/sp810.txt +++ b/Documentation/devicetree/bindings/arm/sp810.txt @@ -4,7 +4,7 @@ SP810 System Controller Required properties: - compatible: standard compatible string for a Primecell peripheral, - see Documentation/devicetree/bindings/arm/primecell.txt + see Documentation/devicetree/bindings/arm/primecell.yaml for more details should be: "arm,sp810", "arm,primecell" diff --git a/Documentation/devicetree/bindings/arm/topology.txt b/Documentation/devicetree/bindings/arm/topology.txt index de9eb0486630..b0d80c0fb265 100644 --- a/Documentation/devicetree/bindings/arm/topology.txt +++ b/Documentation/devicetree/bindings/arm/topology.txt @@ -472,4 +472,4 @@ cpus { =============================================================================== [1] ARM Linux kernel documentation - Documentation/devicetree/bindings/arm/cpus.txt + Documentation/devicetree/bindings/arm/cpus.yaml diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt index af376a01f2b7..23b52dc02266 100644 --- a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt +++ b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt @@ -18,4 +18,4 @@ Required Properties: Each clock is assigned an identifier and client nodes use this identifier to specify the clock which they consume. -All these identifier could be found in <dt-bindings/clock/marvell-mmp2.h>. +All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>. diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt index ef89ab46b2c9..572fa2773ec4 100644 --- a/Documentation/devicetree/bindings/display/arm,pl11x.txt +++ b/Documentation/devicetree/bindings/display/arm,pl11x.txt @@ -1,6 +1,6 @@ * ARM PrimeCell Color LCD Controller PL110/PL111 -See also Documentation/devicetree/bindings/arm/primecell.txt +See also Documentation/devicetree/bindings/arm/primecell.yaml Required properties: diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt index ac8df3b871f9..f8759145ce1a 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -27,7 +27,6 @@ Example: reg = <0x04300000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = <GIC_SPI 80 0>; - interrupt-names = "kgsl_3d0_irq"; clock-names = "core", "iface", diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt index 38ca2201e8ae..2e097b57f170 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt @@ -14,8 +14,6 @@ Required properties: "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K SoCs (either from AP or CP), see - Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt - and Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt for specific details about the offset property. diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt index b83bb8249074..a3be5298a5eb 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt @@ -78,7 +78,7 @@ Sub-nodes: PPI affinity can be expressed as a single "ppi-partitions" node, containing a set of sub-nodes, each with the following property: - affinity: Should be a list of phandles to CPU nodes (as described in -Documentation/devicetree/bindings/arm/cpus.txt). + Documentation/devicetree/bindings/arm/cpus.yaml). GICv3 has one or more Interrupt Translation Services (ITS) that are used to route Message Signalled Interrupts (MSI) to the CPUs. diff --git a/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt b/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt deleted file mode 100644 index 099d9362ebc1..000000000000 --- a/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt +++ /dev/null @@ -1,14 +0,0 @@ -NVIDIA Tegra 20 GART - -Required properties: -- compatible: "nvidia,tegra20-gart" -- reg: Two pairs of cells specifying the physical address and size of - the memory controller registers and the GART aperture respectively. - -Example: - - gart { - compatible = "nvidia,tegra20-gart"; - reg = <0x7000f024 0x00000018 /* controller registers */ - 0x58000000 0x02000000>; /* GART aperture */ - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt index 7d60a50a4fa1..e55328237df4 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt @@ -1,26 +1,37 @@ NVIDIA Tegra20 MC(Memory Controller) Required properties: -- compatible : "nvidia,tegra20-mc" -- reg : Should contain 2 register ranges(address and length); see the - example below. Note that the MC registers are interleaved with the - GART registers, and hence must be represented as multiple ranges. +- compatible : "nvidia,tegra20-mc-gart" +- reg : Should contain 2 register ranges: physical base address and length of + the controller's registers and the GART aperture respectively. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - mc: the module's clock input - interrupts : Should contain MC General interrupt. - #reset-cells : Should be 1. This cell represents memory client module ID. The assignments may be found in header file <dt-bindings/memory/tegra20-mc.h> or in the TRM documentation. +- #iommu-cells: Should be 0. This cell represents the number of cells in an + IOMMU specifier needed to encode an address. GART supports only a single + address space that is shared by all devices, therefore no additional + information needed for the address encoding. Example: mc: memory-controller@7000f000 { - compatible = "nvidia,tegra20-mc"; - reg = <0x7000f000 0x024 - 0x7000f03c 0x3c4>; - interrupts = <0 77 0x04>; + compatible = "nvidia,tegra20-mc-gart"; + reg = <0x7000f000 0x400 /* controller registers */ + 0x58000000 0x02000000>; /* GART aperture */ + clocks = <&tegra_car TEGRA20_CLK_MC>; + clock-names = "mc"; + interrupts = <GIC_SPI 77 0x04>; #reset-cells = <1>; + #iommu-cells = <0>; }; video-codec@6001a000 { compatible = "nvidia,tegra20-vde"; ... resets = <&mc TEGRA20_MC_RESET_VDE>; + iommus = <&mc>; }; diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt index 98c9f560e5c5..38fe34fd8b8a 100644 --- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt +++ b/Documentation/devicetree/bindings/reset/socfpga-reset.txt @@ -1,7 +1,8 @@ Altera SOCFPGA Reset Manager Required properties: -- compatible : "altr,rst-mgr" +- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10) + "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC - reg : Should contain 1 register ranges(address and length) - altr,modrst-offset : Should contain the offset of the first modrst register. - #reset-cells: 1 diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index 101743dda223..ea005177d20a 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -120,27 +120,30 @@ Example: }; -USB3 core reset ---------------- +Peripheral core reset in glue layer +----------------------------------- -USB3 core reset belongs to USB3 glue layer. Before using the core reset, -it is necessary to control the clocks and resets to enable this layer. -These clocks and resets should be described in each property. +Some peripheral core reset belongs to its own glue layer. Before using +this core reset, it is necessary to control the clocks and resets to enable +this layer. These clocks and resets should be described in each property. Required properties: - compatible: Should be - "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC - "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC + "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3 + "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3 + "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3 + "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3 + "socionext,uniphier-pro4-ahci-reset" - for Pro4 SoC AHCI + "socionext,uniphier-pxs2-ahci-reset" - for PXs2 SoC AHCI + "socionext,uniphier-pxs3-ahci-reset" - for PXs3 SoC AHCI - #reset-cells: Should be 1. - reg: Specifies offset and length of the register set for the device. -- clocks: A list of phandles to the clock gate for USB3 glue layer. +- clocks: A list of phandles to the clock gate for the glue layer. According to the clock-names, appropriate clocks are required. - clock-names: Should contain "gio", "link" - for Pro4 SoC "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. +- resets: A list of phandles to the reset control for the glue layer. According to the reset-names, appropriate resets are required. - reset-names: Should contain "gio", "link" - for Pro4 SoC diff --git a/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt b/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt index 36603419d6f8..0e72183f52bc 100644 --- a/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt +++ b/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt @@ -4,14 +4,10 @@ Required properties: - compatible : "olpc,ap-sp" - reg : base address and length of SoC's WTM registers - interrupts : SP-AP interrupt -- clocks : phandle + clock-specifier for the clock that drives the WTM -- clock-names: should be "sp" Example: ap-sp@d4290000 { compatible = "olpc,ap-sp"; reg = <0xd4290000 0x1000>; interrupts = <40>; - clocks = <&soc_clocks MMP2_CLK_SP>; - clock-names = "sp"; } diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt index 0b8cc533ca83..cf759e5f9b10 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt @@ -55,7 +55,7 @@ of these nodes are defined by the individual bindings for the specific function = EXAMPLE The following example represents the GLINK RPM node on a MSM8996 device, with the function for the "rpm_request" channel defined, which is used for -regualtors and root clocks. +regulators and root clocks. apcs_glb: mailbox@9820000 { compatible = "qcom,msm8996-apcs-hmss-global"; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt index a35af2dafdad..49e1d72d3648 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt @@ -41,12 +41,12 @@ processor ID) and a string identifier. - qcom,local-pid: Usage: required Value type: <u32> - Definition: specifies the identfier of the local endpoint of this edge + Definition: specifies the identifier of the local endpoint of this edge - qcom,remote-pid: Usage: required Value type: <u32> - Definition: specifies the identfier of the remote endpoint of this edge + Definition: specifies the identifier of the remote endpoint of this edge = SUBNODES Each SMP2P pair contain a set of inbound and outbound entries, these are |