diff options
Diffstat (limited to 'Documentation/devicetree')
36 files changed, 657 insertions, 35 deletions
diff --git a/Documentation/devicetree/bindings/arm/actions.txt b/Documentation/devicetree/bindings/arm/actions.txt index 3bc7ea575564..ced764a8549e 100644 --- a/Documentation/devicetree/bindings/arm/actions.txt +++ b/Documentation/devicetree/bindings/arm/actions.txt @@ -21,6 +21,7 @@ Boards: Root node property compatible must contain, depending on board: + - Cubietech CubieBoard6: "cubietech,cubieboard6" - LeMaker Guitar Base Board rev. B: "lemaker,guitar-bb-rev-b", "lemaker,guitar" diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 4e4bc0bae597..f747f47922c5 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -41,6 +41,10 @@ Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: Required root node property: compatible: "amlogic,s912", "amlogic,meson-gxm"; +Boards with the Amlogic Meson AXG A113D SoC shall have the following properties: + Required root node property: + compatible: "amlogic,a113d", "amlogic,meson-axg"; + Board compatible values (alphabetically, grouped by SoC): - "geniatech,atv1200" (Meson6) @@ -71,8 +75,12 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,q200" (Meson gxm s912) - "amlogic,q201" (Meson gxm s912) + - "khadas,vim2" (Meson gxm s912) - "kingnovel,r-box-pro" (Meson gxm S912) - "nexbox,a1" (Meson gxm s912) + - "tronsmart,vega-s96" (Meson gxm s912) + + - "amlogic,s400" (Meson axg a113d) Amlogic Meson Firmware registers Interface ------------------------------------------ diff --git a/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt new file mode 100644 index 000000000000..101dc21014ec --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt @@ -0,0 +1,20 @@ +Amlogic Meson8 and Meson8b "analog top" registers: +-------------------------------------------------- + +The analog top registers contain information about the so-called +"metal revision" (which encodes the "minor version") of the SoC. + +Required properties: +- reg: the register range of the analog top registers +- compatible: depending on the SoC this should be one of: + - "amlogic,meson8-analog-top" + - "amlogic,meson8b-analog-top" + along with "syscon" + + +Example: + + analog_top: analog-top@81a8 { + compatible = "amlogic,meson8-analog-top", "syscon"; + reg = <0x81a8 0x14>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/assist.txt b/Documentation/devicetree/bindings/arm/amlogic/assist.txt new file mode 100644 index 000000000000..7656812b67b9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/assist.txt @@ -0,0 +1,17 @@ +Amlogic Meson6/Meson8/Meson8b assist registers: +----------------------------------------------- + +The assist registers contain basic information about the SoC, +for example the encoded SoC part number. + +Required properties: +- reg: the register range of the assist registers +- compatible: should be "amlogic,meson-mx-assist" along with "syscon" + + +Example: + + assist: assist@7c00 { + compatible = "amlogic,meson-mx-assist", "syscon"; + reg = <0x7c00 0x200>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt new file mode 100644 index 000000000000..407e27f230ab --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt @@ -0,0 +1,17 @@ +Amlogic Meson6/Meson8/Meson8b bootrom: +-------------------------------------- + +The bootrom register area can be used to access SoC specific +information, such as the "misc version". + +Required properties: +- reg: the register range of the bootrom registers +- compatible: should be "amlogic,meson-mx-bootrom" along with "syscon" + + +Example: + + bootrom: bootrom@d9040000 { + compatible = "amlogic,meson-mx-bootrom", "syscon"; + reg = <0xd9040000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt new file mode 100644 index 000000000000..a124c7fc4dcd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt @@ -0,0 +1,14 @@ +Broadcom Hurricane 2 device tree bindings +--------------------------------------- + +Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs +are based on Broadcom's iProc SoC architecture and feature a single core Cortex +A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND +flash and a PCIe attached integrated switching engine. + +Boards with Hurricane SoCs shall have the following properties: + +Required root node property: + +BCM53342 +compatible = "brcm,bcm53342", "brcm,hr2"; diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt index 3a4e5901ce31..ce8dabf8c0f9 100644 --- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt +++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt @@ -21,6 +21,8 @@ Required properties: "ti,omap3-scm" "ti,omap4-scm-core" "ti,omap4-scm-padconf-core" + "ti,omap4-scm-wkup" + "ti,omap4-scm-padconf-wkup" "ti,omap5-scm-core" "ti,omap5-scm-padconf-core" "ti,dra7-scm-core" diff --git a/Documentation/devicetree/bindings/arm/realtek.txt b/Documentation/devicetree/bindings/arm/realtek.txt index 13d755787b4f..95839e19ae92 100644 --- a/Documentation/devicetree/bindings/arm/realtek.txt +++ b/Documentation/devicetree/bindings/arm/realtek.txt @@ -12,6 +12,8 @@ Required root node properties: Root node property compatible must contain, depending on board: + - MeLE V9: "mele,v9" + - ProBox2 AVA: "probox2,ava" - Zidoo X9S: "zidoo,x9s" diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index b003148e2945..326d24bca1a9 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -1,5 +1,9 @@ Rockchip platforms device tree bindings --------------------------------------- +- Amarula Vyasa RK3288 board + Required root node properties: + - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; + - Asus Tinker board Required root node properties: - compatible = "asus,rk3288-tinker", "rockchip,rk3288"; diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index 3c551894f621..5e95e3e81140 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -57,6 +57,7 @@ Required root node properties: - "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel Odroid XU3 Lite board. - "hardkernel,odroid-xu4" - for Exynos5422-based Hardkernel Odroid XU4. + - "hardkernel,odroid-hc1" - for Exynos5422-based Hardkernel Odroid HC1. * Insignal - "insignal,arndale" - for Exynos5250-based Insignal Arndale board. diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index ae75cb3b1331..020d758fc0c5 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -39,6 +39,8 @@ SoCs: compatible = "renesas,r8a7795" - R-Car M3-W (R8A77960) compatible = "renesas,r8a7796" + - R-Car V3M (R8A77970) + compatible = "renesas,r8a77970" - R-Car D3 (R8A77995) compatible = "renesas,r8a77995" @@ -57,6 +59,8 @@ Boards: compatible = "renesas,bockw", "renesas,r8a7778" - Draak (RTP0RC77995SEB0010S) compatible = "renesas,draak", "renesas,r8a77995" + - Eagle (RTP0RC77970SEB0010S) + compatible = "renesas,eagle", "renesas,r8a77970" - Genmai (RTK772100BC00000BR) compatible = "renesas,genmai", "renesas,r7s72100" - GR-Peach (X28A-M01-E/F) @@ -65,7 +69,7 @@ Boards: compatible = "renesas,gose", "renesas,r8a7793" - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1)) H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0)) - compatible = "renesas,h3ulcb", "renesas,r8a7795"; + compatible = "renesas,h3ulcb", "renesas,r8a7795" - Henninger compatible = "renesas,henninger", "renesas,r8a7791" - iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D) @@ -76,6 +80,8 @@ Boards: compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743" - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) compatible = "iwave,g20m", "renesas,r8a7743" + - Kingfisher (SBEV-RCAR-KF-M03) + compatible = "shimafuji,kingfisher" - Koelsch (RTP0RC7791SEB00010S) compatible = "renesas,koelsch", "renesas,r8a7791" - Kyoto Microcomputer Co. KZM-A9-Dual @@ -85,7 +91,7 @@ Boards: - Lager (RTP0RC7790SEB00010S) compatible = "renesas,lager", "renesas,r8a7790" - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) - compatible = "renesas,m3ulcb", "renesas,r8a7796"; + compatible = "renesas,m3ulcb", "renesas,r8a7796" - Marzen (R0P7779A00010S) compatible = "renesas,marzen", "renesas,r8a7779" - Porter (M2-LCDP) @@ -93,11 +99,11 @@ Boards: - RSKRZA1 (YR0K77210C000BE) compatible = "renesas,rskrza1", "renesas,r7s72100" - Salvator-X (RTP0RC7795SIPB0010S) - compatible = "renesas,salvator-x", "renesas,r8a7795"; + compatible = "renesas,salvator-x", "renesas,r8a7795" - Salvator-X (RTP0RC7796SIPB0011S) - compatible = "renesas,salvator-x", "renesas,r8a7796"; + compatible = "renesas,salvator-x", "renesas,r8a7796" - Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S) - compatible = "renesas,salvator-xs", "renesas,r8a7795"; + compatible = "renesas,salvator-xs", "renesas,r8a7795" - SILK (RTP0RC7794LCB00011S) compatible = "renesas,silk", "renesas,r8a7794" - SK-RZG1E (YR8A77450S000BE) diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt new file mode 100644 index 000000000000..fb1790e39398 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt @@ -0,0 +1,93 @@ +Texas Instruments sysc interconnect target module wrapper binding + +Texas Instruments SoCs can have a generic interconnect target module +hardware for devices connected to various interconnects such as L3 +interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc +is mostly used for interaction between module and PRCM. It participates +in the OCP Disconnect Protocol but other than that is mostly independent +of the interconnect. + +Each interconnect target module can have one or more devices connected to +it. There is a set of control registers for managing interconnect target +module clocks, idle modes and interconnect level resets for the module. + +These control registers are sprinkled into the unused register address +space of the first child device IP block managed by the interconnect +target module and typically are named REVISION, SYSCONFIG and SYSSTATUS. + +Required standard properties: + +- compatible shall be one of the following generic types: + + "ti,sysc-omap2" + "ti,sysc-omap4" + "ti,sysc-omap4-simple" + + or one of the following derivative types for hardware + needing special workarounds: + + "ti,sysc-omap3430-sr" + "ti,sysc-omap3630-sr" + "ti,sysc-omap4-sr" + "ti,sysc-omap3-sham" + "ti,sysc-omap-aes" + "ti,sysc-mcasp" + "ti,sysc-usb-host-fs" + +- reg shall have register areas implemented for the interconnect + target module in question such as revision, sysc and syss + +- reg-names shall contain the register names implemented for the + interconnect target module in question such as + "rev, "sysc", and "syss" + +- ranges shall contain the interconnect target module IO range + available for one or more child device IP blocks managed + by the interconnect target module, the ranges may include + multiple ranges such as device L4 range for control and + parent L3 range for DMA access + +Optional properties: + +- clocks clock specifier for each name in the clock-names as + specified in the binding documentation for ti-clkctrl, + typically available for all interconnect targets on TI SoCs + based on omap4 except if it's read-only register in hwauto + mode as for example omap4 L4_CFG_CLKCTRL + +- clock-names should contain at least "fck", and optionally also "ick" + depending on the SoC and the interconnect target module + +- ti,hwmods optional TI interconnect module name to use legacy + hwmod platform data + + +Example: Single instance of MUSB controller on omap4 using interconnect ranges +using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000): + + target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ + compatible = "ti,sysc-omap2"; + ti,hwmods = "usb_otg_hs"; + reg = <0x2b400 0x4>, + <0x2b404 0x4>, + <0x2b408 0x4>; + reg-names = "rev", "sysc", "syss"; + clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2b000 0x1000>; + + usb_otg_hs: otg@0 { + compatible = "ti,omap4-musb"; + reg = <0x0 0x7ff>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + usb-phy = <&usb2_phy>; + ... + }; + }; + +Note that other SoCs, such as am335x can have multipe child devices. On am335x +there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA +instance as children of a single interconnet target module. diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt index f2c5f0e4a363..f8e4a93466cb 100644 --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt @@ -137,6 +137,20 @@ These clock IDs are defined in: ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1 ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2 +Hurricane 2 +------ +PLL and leaf clock compatible strings for Hurricane 2 are: + "brcm,hr2-armpll" + +The following table defines the set of PLL/clock for Hurricane 2: + + Clock Source Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + Northstar and Northstar Plus ------ PLL and leaf clock compatible strings for Northstar and Northstar Plus are: diff --git a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt index a135504c7d57..cac24ee10b72 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt +++ b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt @@ -32,7 +32,7 @@ Example: compatible = "st,stm32h743-rcc", "st,stm32-rcc"; reg = <0x58024400 0x400>; #reset-cells = <1>; - #clock-cells = <2>; + #clock-cells = <1>; clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>; st,syscfg = <&pwrcfg>; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index b1a8929c2536..3a72a103a18a 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -37,7 +37,7 @@ Optional properties: Example: - hdmi0: hdmi0@fead0000 { + hdmi0: hdmi@fead0000 { compatible = "renesas,r8a7795-dw-hdmi"; reg = <0 0xfead0000 0 0x10000>; interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index b4ebd56d03f3..c6814d7cc2b2 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -13,6 +13,10 @@ Required properties: + allwinner,sun50i-h5-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + + rockchip,rk3036-mali + + rockchip,rk3066-mali + + rockchip,rk3188-mali + + rockchip,rk3228-mali + stericsson,db8500-mali - reg: Physical base address and length of the GPU registers @@ -40,10 +44,18 @@ Optional properties: Memory region to allocate from, as defined in Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt + - mali-supply: + Phandle to regulator for the Mali device, as defined in + Documentation/devicetree/bindings/regulator/regulator.txt for details. + - operating-points-v2: Operating Points for the GPU, as defined in Documentation/devicetree/bindings/opp/opp.txt + - power-domains: + A power domain consumer specifier as defined in + Documentation/devicetree/bindings/power/power_domain.txt + Vendor-specific bindings ------------------------ @@ -63,6 +75,10 @@ to specify one more vendor-specific compatible, among: Required properties: * resets: phandle to the reset line for the GPU + - Rockchip variants: + Required properties: + * resets: phandle to the reset line for the GPU + - stericsson,db8500-mali Required properties: * interrupt-names and interrupts: diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt index b8eca3c7810d..955e335e7e56 100644 --- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt +++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt @@ -1,10 +1,12 @@ OMAP SSI controller bindings -OMAP Synchronous Serial Interface (SSI) controller implements a legacy -variant of MIPI's High Speed Synchronous Serial Interface (HSI). +OMAP3's Synchronous Serial Interface (SSI) controller implements a +legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI), +while the controller found inside OMAP4 is supposed to be fully compliant +with the HSI standard. Required properties: -- compatible: Should include "ti,omap3-ssi". +- compatible: Should include "ti,omap3-ssi" or "ti,omap4-hsi" - reg-names: Contains the values "sys" and "gdd" (in this order). - reg: Contains a matching register specifier for each entry in reg-names. @@ -27,6 +29,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device. Required Port sub-node properties: - compatible: Should be set to the following value ti,omap3-ssi-port (applicable to OMAP34xx devices) + ti,omap4-hsi-port (applicable to OMAP44xx devices) - reg-names: Contains the values "tx" and "rx" (in this order). - reg: Contains a matching register specifier for each entry in reg-names. @@ -38,6 +41,10 @@ Required Port sub-node properties: property. If it's missing the port will not be enabled. +Optional properties: +- ti,hwmods: Shall contain TI interconnect module name if needed + by the SoC + Example for Nokia N900: ssi-controller@48058000 { diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt index 12c5ef26ec73..fdc40e354a64 100644 --- a/Documentation/devicetree/bindings/leds/ams,as3645a.txt +++ b/Documentation/devicetree/bindings/leds/ams,as3645a.txt @@ -15,11 +15,14 @@ Required properties compatible : Must be "ams,as3645a". reg : The I2C address of the device. Typically 0x30. +#address-cells : 1 +#size-cells : 0 -Required properties of the "flash" child node -============================================= +Required properties of the flash child node (0) +=============================================== +reg: 0 flash-timeout-us: Flash timeout in microseconds. The value must be in the range [100000, 850000] and divisible by 50000. flash-max-microamp: Maximum flash current in microamperes. Has to be @@ -33,20 +36,21 @@ ams,input-max-microamp: Maximum flash controller input current. The and divisible by 50000. -Optional properties of the "flash" child node -============================================= +Optional properties of the flash child node +=========================================== label : The label of the flash LED. -Required properties of the "indicator" child node -================================================= +Required properties of the indicator child node (1) +=================================================== +reg: 1 led-max-microamp: Maximum indicator current. The allowed values are 2500, 5000, 7500 and 10000. -Optional properties of the "indicator" child node -================================================= +Optional properties of the indicator child node +=============================================== label : The label of the indicator LED. @@ -55,16 +59,20 @@ Example ======= as3645a@30 { + #address-cells: 1 + #size-cells: 0 reg = <0x30>; compatible = "ams,as3645a"; - flash { + flash@0 { + reg = <0x0>; flash-timeout-us = <150000>; flash-max-microamp = <320000>; led-max-microamp = <60000>; ams,input-max-microamp = <1750000>; label = "as3645a:flash"; }; - indicator { + indicator@1 { + reg = <0x1>; led-max-microamp = <10000>; label = "as3645a:indicator"; }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 0db60470ebb6..fd823d6091b2 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -7,8 +7,10 @@ of the EMIF IP and memory parts attached to it. Required properties: - compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev> - is the IP revision of the specific EMIF instance. - For am437x should be ti,emif-am4372. + is the IP revision of the specific EMIF instance. For newer controllers, + compatible should be one of the following: + "ti,emif-am3352" + "ti,emif-am4372" - phy-type : <u32> indicating the DDR phy type. Following are the allowed values diff --git a/Documentation/devicetree/bindings/misc/ge-achc.txt b/Documentation/devicetree/bindings/misc/ge-achc.txt new file mode 100644 index 000000000000..77df94d7a32f --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ge-achc.txt @@ -0,0 +1,26 @@ +* GE Healthcare USB Management Controller + +A device which handles data aquisition from compatible USB based peripherals. +SPI is used for device management. + +Note: This device does not expose the peripherals as USB devices. + +Required properties: + +- compatible : Should be "ge,achc" + +Required SPI properties: + +- reg : Should be address of the device chip select within + the controller. + +- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be + 1MHz for the GE ACHC. + +Example: + +spidev0: spi@0 { + compatible = "ge,achc"; + reg = <0>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt index b878a1e305af..ed1456f5c94d 100644 --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt @@ -16,11 +16,13 @@ Required Properties: - clocks: Array of clocks required for SDHC. - Require at least input clock for Xenon IP core. + Require at least input clock for Xenon IP core. For Armada AP806 and + CP110, the AXI clock is also mandatory. - clock-names: Array of names corresponding to clocks property. The input clock for Xenon IP core should be named as "core". + The input clock for the AXI bus must be named as "axi". - reg: * For "marvell,armada-3700-sdhci", two register areas. @@ -106,8 +108,8 @@ Example: compatible = "marvell,armada-ap806-sdhci"; reg = <0xaa0000 0x1000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH> - clocks = <&emmc_clk>; - clock-names = "core"; + clocks = <&emmc_clk>,<&axi_clk>; + clock-names = "core", "axi"; bus-width = <4>; marvell,xenon-phy-slow-mode; marvell,xenon-tun-count = <11>; @@ -126,8 +128,8 @@ Example: interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH> vqmmc-supply = <&sd_vqmmc_regulator>; vmmc-supply = <&sd_vmmc_regulator>; - clocks = <&sdclk>; - clock-names = "core"; + clocks = <&sdclk>, <&axi_clk>; + clock-names = "core", "axi"; bus-width = <4>; marvell,xenon-tun-count = <9>; }; diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt index 9ce35af8507c..4cab5d85cf6f 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt @@ -13,6 +13,7 @@ Required properties: at25df321a at25df641 at26df081a + en25s64 mr25h256 mr25h10 mr25h40 @@ -31,6 +32,7 @@ Required properties: s25fl008k s25fl064k sst25vf040b + sst25wf040b m25p40 m25p80 m25p16 diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt new file mode 100644 index 000000000000..3d6d5fa0c4d5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt @@ -0,0 +1,207 @@ +* Allwinner sun8i GMAC ethernet controller + +This device is a platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +Required properties: +- compatible: must be one of the following string: + "allwinner,sun8i-a83t-emac" + "allwinner,sun8i-h3-emac" + "allwinner,sun8i-v3s-emac" + "allwinner,sun50i-a64-emac" +- reg: address and length of the register for the device. +- interrupts: interrupt for the device +- interrupt-names: must be "macirq" +- clocks: A phandle to the reference clock for this device +- clock-names: must be "stmmaceth" +- resets: A phandle to the reset control for this device +- reset-names: must be "stmmaceth" +- phy-mode: See ethernet.txt +- phy-handle: See ethernet.txt +- #address-cells: shall be 1 +- #size-cells: shall be 0 +- syscon: A phandle to the syscon of the SoC with one of the following + compatible string: + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller + - allwinner,sun8i-a83t-system-controller + +Optional properties: +- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0) +- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0) +Both delay properties need to be a multiple of 100. They control the delay for +external PHY. + +Optional properties for the following compatibles: + - "allwinner,sun8i-h3-emac", + - "allwinner,sun8i-v3s-emac": +- allwinner,leds-active-low: EPHY LEDs are active low + +Required child node of emac: +- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio" + +Required properties of the mdio node: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + +The device node referenced by "phy" or "phy-handle" must be a child node +of the mdio node. See phy.txt for the generic PHY bindings. + +The following compatibles require that the emac node have a mdio-mux child +node called "mdio-mux": + - "allwinner,sun8i-h3-emac" + - "allwinner,sun8i-v3s-emac": +Required properties for the mdio-mux node: + - compatible = "allwinner,sun8i-h3-mdio-mux" + - mdio-parent-bus: a phandle to EMAC mdio + - one child mdio for the integrated mdio with the compatible + "allwinner,sun8i-h3-mdio-internal" + - one child mdio for the external mdio if present (V3s have none) +Required properties for the mdio-mux children node: + - reg: 1 for internal MDIO bus, 2 for external MDIO bus + +The following compatibles require a PHY node representing the integrated +PHY, under the integrated MDIO bus node if an mdio-mux node is used: + - "allwinner,sun8i-h3-emac", + - "allwinner,sun8i-v3s-emac": + +Additional information regarding generic multiplexer properties can be found +at Documentation/devicetree/bindings/net/mdio-mux.txt + +Required properties of the integrated phy node: +- clocks: a phandle to the reference clock for the EPHY +- resets: a phandle to the reset control for the EPHY +- Must be a child of the integrated mdio + +Example with integrated PHY: +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + + int_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + phy-is-integrated; + }; + }; + ext_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +Example with external PHY: +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + allwinner,leds-active-low; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + + int_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + ext_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }: + }; +}; + +Example with SoC without integrated PHY + +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-a83t-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index 7e2dad08a12e..1814fa13f6ab 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -21,8 +21,9 @@ Required properties: - main controller clock (for both armada-375-pp2 and armada-7k-pp2) - GOP clock (for both armada-375-pp2 and armada-7k-pp2) - MG clock (only for armada-7k-pp2) -- clock-names: names of used clocks, must be "pp_clk", "gop_clk" and - "mg_clk" (the latter only for armada-7k-pp2). + - AXI clock (only for armada-7k-pp2) +- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk" + and "axi_clk" (the 2 latter only for armada-7k-pp2). The ethernet ports are represented by subnodes. At least one port is required. @@ -78,8 +79,9 @@ Example for marvell,armada-7k-pp2: cpm_ethernet: ethernet@0 { compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>; - clock-names = "pp_clk", "gop_clk", "gp_clk"; + clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, + <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>; + clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk"; eth0: eth0 { interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt index 6af8eed1adeb..9c16ee2965a2 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt @@ -4,6 +4,7 @@ The device node has following properties. Required properties: - compatible: should be "rockchip,<name>-gamc" + "rockchip,rk3128-gmac": found on RK312x SoCs "rockchip,rk3228-gmac": found on RK322x SoCs "rockchip,rk3288-gmac": found on RK3288 SoCs "rockchip,rk3328-gmac": found on RK3328 SoCs diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index 33e3d3c47552..58c2a4c229db 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -143,6 +143,24 @@ Required properties: * 16 : Alternate Function 15 * 17 : Analog + To simplify the usage, macro is available to generate "pinmux" field. + This macro is available here: + - include/dt-bindings/pinctrl/stm32-pinfunc.h + + Some examples of using macro: + /* GPIO A9 set as alernate function 2 */ + ... { + pinmux = <STM32_PINMUX('A', 9, AF2)>; + }; + /* GPIO A9 set as GPIO */ + ... { + pinmux = <STM32_PINMUX('A', 9, GPIO)>; + }; + /* GPIO A9 set as analog */ + ... { + pinmux = <STM32_PINMUX('A', 9, ANALOG)>; + }; + Optional properties: - GENERIC_PINCONFIG: is the generic pinconfig options to use. Available options are: @@ -165,13 +183,13 @@ pin-controller { ... usart1_pins_a: usart1@0 { pins1 { - pinmux = <STM32F429_PA9_FUNC_USART1_TX>; + pinmux = <STM32_PINMUX('A', 9, AF7)>; bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = <STM32F429_PA10_FUNC_USART1_RX>; + pinmux = <STM32_PINMUX('A', 10, AF7)>; bias-disable; }; }; diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt b/Documentation/devicetree/bindings/power/renesas,apmu.txt index af21502e939c..f747f95eee58 100644 --- a/Documentation/devicetree/bindings/power/renesas,apmu.txt +++ b/Documentation/devicetree/bindings/power/renesas,apmu.txt @@ -8,6 +8,7 @@ Required properties: - compatible: Should be "renesas,<soctype>-apmu", "renesas,apmu" as fallback. Examples with soctypes are: - "renesas,r8a7743-apmu" (RZ/G1M) + - "renesas,r8a7745-apmu" (RZ/G1E) - "renesas,r8a7790-apmu" (R-Car H2) - "renesas,r8a7791-apmu" (R-Car M2-W) - "renesas,r8a7792-apmu" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/power/ti-smartreflex.txt b/Documentation/devicetree/bindings/power/ti-smartreflex.txt new file mode 100644 index 000000000000..9780957c9115 --- /dev/null +++ b/Documentation/devicetree/bindings/power/ti-smartreflex.txt @@ -0,0 +1,47 @@ +Texas Instruments SmartReflex binding + +SmartReflex is used to set and adjust the SoC operating points. + + +Required properties: + +compatible: Shall be one of the following: + "ti,omap3-smartreflex-core" + "ti,omap3-smartreflex-iva" + "ti,omap4-smartreflex-core" + "ti,omap4-smartreflex-mpu" + "ti,omap4-smartreflex-iva" + +reg: Shall contain the device instance IO range + +interrupts: Shall contain the device instance interrupt + + +Optional properties: + +ti,hwmods: Shall contain the TI interconnect module name if needed + by the SoC + + +Example: + + smartreflex_iva: smartreflex@4a0db000 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0x4a0db000 0x80>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_iva"; + }; + + smartreflex_core: smartreflex@4a0dd000 { + compatible = "ti,omap4-smartreflex-core"; + reg = <0x4a0dd000 0x80>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_core"; + }; + + smartreflex_mpu: smartreflex@4a0d9000 { + compatible = "ti,omap4-smartreflex-mpu"; + reg = <0x4a0d9000 0x80>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_mpu"; + }; diff --git a/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt new file mode 100644 index 000000000000..830069b1c37c --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt @@ -0,0 +1,28 @@ +Binding for the Synopsys HSDK reset controller + +This binding uses the common reset binding[1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + +Required properties: +- compatible: should be "snps,hsdk-reset". +- reg: should always contain 2 pairs address - length: first for reset + configuration register and second for corresponding SW reset and status bits + register. +- #reset-cells: from common reset binding; Should always be set to 1. + +Example: + reset: reset@880 { + compatible = "snps,hsdk-reset"; + #reset-cells = <1>; + reg = <0x8A0 0x4>, <0xFF0 0x4>; + }; + +Specifying reset lines connected to IP modules: + ethernet@.... { + .... + resets = <&reset HSDK_V1_ETH_RESET>; + .... + }; + +The index could be found in <dt-bindings/reset/snps,hsdk-reset.h> diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt index 3eca6de6369d..a65d7b71e81a 100644 --- a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt +++ b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt @@ -8,6 +8,12 @@ Required properties: the firmware event log - linux,sml-size : size of the memory allocated for the firmware event log +Optional properties: + +- powered-while-suspended: present when the TPM is left powered on between + suspend and resume (makes the suspend/resume + callbacks do nothing). + Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C) ---------------------------------------------------------- diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt index 6087defd9f93..d37fabe17bd1 100644 --- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt +++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt @@ -8,6 +8,6 @@ Required properties: Example: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x400>; + reg = <0x12000 0x200>; interrupts = <43>; }; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 4fc96946f81d..cf504d0380ae 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -41,6 +41,8 @@ Required properties: - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART. - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART. + - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART. + - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART. - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART. - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART. - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index 13b1fcc8469e..dcc7eaada511 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -5,6 +5,7 @@ Required properties: "fsl,ls2085a-dspi" or "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi" + "fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi" - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt index d48fc5280d5a..cef716a236f1 100644 --- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt @@ -13,6 +13,7 @@ Example : +for Hi6220: tsensor: tsensor@0,f7030700 { compatible = "hisilicon,tsensor"; reg = <0x0 0xf7030700 0x0 0x1000>; @@ -21,3 +22,11 @@ Example : clock-names = "thermal_clk"; #thermal-sensor-cells = <1>; } + +for Hi3660: + tsensor: tsensor@fff30000 { + compatible = "hisilicon,hi3660-tsensor"; + reg = <0x0 0xfff30000 0x0 0x1000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt new file mode 100644 index 000000000000..276387dd6815 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt @@ -0,0 +1,32 @@ +NVIDIA Tegra186 BPMP thermal sensor + +In Tegra186, the BPMP (Boot and Power Management Processor) implements an +interface that is used to read system temperatures, including CPU cluster +and GPU temperatures. This binding describes the thermal sensor that is +exposed by BPMP. + +The BPMP thermal node must be located directly inside the main BPMP node. See +../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding. + +This node represents a thermal sensor. See thermal.txt for details of the +core thermal binding. + +Required properties: +- compatible: + Array of strings. + One of: + - "nvidia,tegra186-bpmp-thermal". +- #thermal-sensor-cells: Cell for sensor index. + Single-cell integer. + Must be <1>. + +Example: + +bpmp { + ... + + bpmp_thermal: thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 1ea1fd4232ab..3d674d4ac46e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -3,8 +3,8 @@ Device tree binding vendor prefix registry. Keep list in alphabetical order. This isn't an exhaustive list, but you should add new prefixes to it before using them to avoid name-space collisions. -abcn Abracon Corporation abilis Abilis Systems +abracon Abracon Corporation actions Actions Semiconductor Co., Ltd. active-semi Active-Semi International Inc ad Avionic Design GmbH @@ -18,6 +18,7 @@ al Annapurna Labs allwinner Allwinner Technology Co., Ltd. alphascale AlphaScale Integrated Circuits Systems, Inc. altr Altera Corp. +amarula Amarula Solutions amazon Amazon.com, Inc. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amd Advanced Micro Devices (AMD), Inc. @@ -113,6 +114,7 @@ everspin Everspin Technologies, Inc. exar Exar Corporation excito Excito ezchip EZchip Semiconductor +fairphone Fairphone B.V. faraday Faraday Technology Corporation fcs Fairchild Semiconductor firefly Firefly @@ -197,6 +199,7 @@ mcube mCube meas Measurement Specialties mediatek MediaTek Inc. megachips MegaChips +mele Shenzhen MeLE Digital Technology Ltd. melexis Melexis N.V. melfas MELFAS Inc. mellanox Mellanox Technologies @@ -263,6 +266,7 @@ plathome Plat'Home Co., Ltd. plda PLDA poslab Poslab Technology Co., Ltd. powervr PowerVR (deprecated, use img) +probox2 PROBOX2 (by W2COMP Co., Ltd.) pulsedlight PulsedLight, Inc qca Qualcomm Atheros, Inc. qcom Qualcomm Technologies, Inc @@ -329,6 +333,7 @@ swir Sierra Wireless syna Synaptics Inc. synology Synology, Inc. tbs TBS Technologies +tbs-biometrics Touchless Biometric Systems AG tcg Trusted Computing Group tcl Toby Churchill Ltd. technexion TechNexion @@ -351,6 +356,7 @@ truly Truly Semiconductors Limited tsd Theobroma Systems Design und Consulting GmbH tyan Tyan Computer Corporation ucrobotics uCRobotics +ubnt Ubiquiti Networks udoo Udoo uniwest United Western Technologies Corp (UniWest) upisemi uPI Semiconductor Corp. |