diff options
Diffstat (limited to 'Documentation/devicetree')
43 files changed, 740 insertions, 174 deletions
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml index 903b31129f01..99e159bc5fb1 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml @@ -54,6 +54,17 @@ properties: - const: xo - const: alternate + interrupts: + minItems: 1 + maxItems: 3 + + interrupt-names: + minItems: 1 + items: + - const: dcvsh-irq-0 + - const: dcvsh-irq-1 + - const: dcvsh-irq-2 + '#freq-domain-cells': const: 1 diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml index 0ccaab16dc61..0b7383b3106b 100644 --- a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Advanced Encryption Standard (AES) HW cryptographic accelerator maintainers: - - Tudor Ambarus <tudor.ambarus@microchip.com> + - Tudor Ambarus <tudor.ambarus@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml index 5163c51b4547..ee2ffb034325 100644 --- a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Secure Hash Algorithm (SHA) HW cryptographic accelerator maintainers: - - Tudor Ambarus <tudor.ambarus@microchip.com> + - Tudor Ambarus <tudor.ambarus@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml index fcc5adf03cad..3d6ed24b1b00 100644 --- a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Triple Data Encryption Standard (TDES) HW cryptographic accelerator maintainers: - - Tudor Ambarus <tudor.ambarus@microchip.com> + - Tudor Ambarus <tudor.ambarus@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt deleted file mode 100644 index 525a4bfd8634..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt +++ /dev/null @@ -1,112 +0,0 @@ -Cadence DSI bridge -================== - -The Cadence DSI bridge is a DPI to DSI bridge supporting up to 4 DSI lanes. - -Required properties: -- compatible: should be set to "cdns,dsi". -- reg: physical base address and length of the controller's registers. -- interrupts: interrupt line connected to the DSI bridge. -- clocks: DSI bridge clocks. -- clock-names: must contain "dsi_p_clk" and "dsi_sys_clk". -- phys: phandle link to the MIPI D-PHY controller. -- phy-names: must contain "dphy". -- #address-cells: must be set to 1. -- #size-cells: must be set to 0. - -Optional properties: -- resets: DSI reset lines. -- reset-names: can contain "dsi_p_rst". - -Required subnodes: -- ports: Ports as described in Documentation/devicetree/bindings/graph.txt. - 2 ports are available: - * port 0: this port is only needed if some of your DSI devices are - controlled through an external bus like I2C or SPI. Can have at - most 4 endpoints. The endpoint number is directly encoding the - DSI virtual channel used by this device. - * port 1: represents the DPI input. - Other ports will be added later to support the new kind of inputs. - -- one subnode per DSI device connected on the DSI bus. Each DSI device should - contain a reg property encoding its virtual channel. - -Example: - dsi0: dsi@fd0c0000 { - compatible = "cdns,dsi"; - reg = <0x0 0xfd0c0000 0x0 0x1000>; - clocks = <&pclk>, <&sysclk>; - clock-names = "dsi_p_clk", "dsi_sys_clk"; - interrupts = <1>; - phys = <&dphy0>; - phy-names = "dphy"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - dsi0_dpi_input: endpoint { - remote-endpoint = <&xxx_dpi_output>; - }; - }; - }; - - panel: dsi-dev@0 { - compatible = "<vendor,panel>"; - reg = <0>; - }; - }; - -or - - dsi0: dsi@fd0c0000 { - compatible = "cdns,dsi"; - reg = <0x0 0xfd0c0000 0x0 0x1000>; - clocks = <&pclk>, <&sysclk>; - clock-names = "dsi_p_clk", "dsi_sys_clk"; - interrupts = <1>; - phys = <&dphy1>; - phy-names = "dphy"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - dsi0_output: endpoint@0 { - reg = <0>; - remote-endpoint = <&dsi_panel_input>; - }; - }; - - port@1 { - reg = <1>; - dsi0_dpi_input: endpoint { - remote-endpoint = <&xxx_dpi_output>; - }; - }; - }; - }; - - i2c@xxx { - panel: panel@59 { - compatible = "<vendor,panel>"; - reg = <0x59>; - - port { - dsi_panel_input: endpoint { - remote-endpoint = <&dsi0_output>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml new file mode 100644 index 000000000000..23060324d16e --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/cdns,dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence DSI bridge + +maintainers: + - Boris Brezillon <boris.brezillon@bootlin.com> + +description: | + CDNS DSI is a bridge device which converts DPI to DSI + +properties: + compatible: + enum: + - cdns,dsi + - ti,j721e-dsi + + reg: + minItems: 1 + items: + - description: + Register block for controller's registers. + - description: + Register block for wrapper settings registers in case of TI J7 SoCs. + + clocks: + items: + - description: PSM clock, used by the IP + - description: sys clock, used by the IP + + clock-names: + items: + - const: dsi_p_clk + - const: dsi_sys_clk + + phys: + maxItems: 1 + + phy-names: + const: dphy + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: dsi_p_rst + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port representing the DSI output. It can have + at most 4 endpoints. The endpoint number is directly encoding + the DSI virtual channel used by this device. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port representing the DPI input. + + required: + - port@1 + +allOf: + - $ref: ../dsi-controller.yaml# + + - if: + properties: + compatible: + contains: + const: ti,j721e-dsi + then: + properties: + reg: + minItems: 2 + maxItems: 2 + power-domains: + maxItems: 1 + else: + properties: + reg: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - ports + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy0>; + phy-names = "dphy"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + + panel@0 { + compatible = "panasonic,vvx10f034n00"; + reg = <0>; + power-supply = <&vcc_lcd_reg>; + }; + }; + }; + + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy1>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_panel_input>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml index b19be0804abe..6e0e3ba9b49e 100644 --- a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml +++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml @@ -16,7 +16,9 @@ description: | properties: compatible: - const: fsl,imx8mp-ldb + enum: + - fsl,imx8mp-ldb + - fsl,imx93-ldb clocks: maxItems: 1 @@ -57,6 +59,18 @@ required: - clocks - ports +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx93-ldb + then: + properties: + ports: + properties: + port@2: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml index b697c42399ea..c9a882ee6d98 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -52,9 +52,49 @@ properties: maxItems: 1 description: extcon specifier for the Power Delivery - port: - $ref: /schemas/graph.yaml#/properties/port - description: A port node pointing to DPI host port node + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: A port node pointing to DPI host port node + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + link-frequencies: + minItems: 1 + maxItems: 1 + description: Allowed max link frequencies in Hz + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for DP output + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + uniqueItems: true + items: + - enum: [ 0, 1 ] + - const: 1 + - const: 2 + - const: 3 + + required: + - port@0 + - port@1 required: - compatible @@ -63,6 +103,7 @@ required: - interrupts - reset-gpios - extcon + - ports additionalProperties: false @@ -85,9 +126,24 @@ examples: reset-gpios = <&pio 179 1>; extcon = <&usbc_extcon>; - port { - it6505_in: endpoint { - remote-endpoint = <&dpi_out>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + it6505_in: endpoint { + remote-endpoint = <&dpi_out>; + link-frequencies = /bits/ 64 <150000000>; + }; + }; + + port@1 { + reg = <1>; + it6505_out: endpoint { + remote-endpoint = <&dp_in>; + data-lanes = <0 1>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml index d3454da1247a..a7eb2603691f 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml @@ -17,7 +17,9 @@ description: | properties: compatible: - const: ite,it66121 + enum: + - ite,it66121 + - ite,it6610 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml index afeeb967393d..d33026f85e19 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml @@ -11,13 +11,14 @@ maintainers: description: | This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas - R-Car V3U SoC. The encoder can operate in either DSI or CSI-2 mode, with up + R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up to four data lanes. properties: compatible: enum: - renesas,r8a779a0-dsi-csi2-tx # for V3U + - renesas,r8a779g0-dsi-csi2-tx # for V4H reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml index 131d5b63ec4f..e08c24633926 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml @@ -22,6 +22,7 @@ properties: items: - enum: - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC} + - renesas,r9a07g054-mipi-dsi # RZ/V2L - const: renesas,rzg2l-mipi-dsi reg: diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index f2c143730a55..6e2fd6e9fa7f 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -32,7 +32,7 @@ properties: - description: Display byte clock - description: Display byte interface clock - description: Display pixel clock - - description: Display escape clock + - description: Display core clock - description: Display AHB clock - description: Display AXI clock @@ -137,8 +137,6 @@ required: - phys - assigned-clocks - assigned-clock-parents - - power-domains - - operating-points-v2 - ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml index d9ad8b659f58..3ec466c3ab38 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml @@ -69,7 +69,6 @@ required: - compatible - reg - reg-names - - vdds-supply unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index 819de5ce0bc9..a43e11d3b00d 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -39,7 +39,6 @@ required: - compatible - reg - reg-names - - vcca-supply unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index 3d8540a06fe2..2f1fd140c87d 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -34,6 +34,10 @@ properties: vddio-supply: description: Phandle to vdd-io regulator device node. + qcom,dsi-phy-regulator-ldo-mode: + type: boolean + description: Indicates if the LDO mode PHY regulator is wanted. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml index d6f043a4b08d..4795e13c7b59 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml @@ -72,7 +72,7 @@ examples: #include <dt-bindings/interconnect/qcom,qcm2290.h> #include <dt-bindings/power/qcom-rpmpd.h> - mdss@5e00000 { + display-subsystem@5e00000 { #address-cells = <1>; #size-cells = <1>; compatible = "qcom,qcm2290-mdss"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml index a86d7f53fa84..886858ef6700 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml @@ -62,7 +62,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> - mdss@5e00000 { + display-subsystem@5e00000 { #address-cells = <1>; #size-cells = <1>; compatible = "qcom,sm6115-mdss"; diff --git a/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml new file mode 100644 index 000000000000..86c834eb4d98 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD panel + +description: | + Delta RGB 8-bit panel found in some Retrogame handhelds + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + - Christophe Branchereau <cbranchereau@gmail.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: auo,a030jtn01 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "auo,a030jtn01"; + reg = <0>; + + spi-max-frequency = <10000000>; + + reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>; + power-supply = <&lcd_power>; + + backlight = <&backlight>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml new file mode 100644 index 000000000000..d54e96b2a9e1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/focaltech,gpt3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Focaltech GPT3 3.0" (640x480 pixels) IPS LCD panel + +maintainers: + - Christophe Branchereau <cbranchereau@gmail.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: focaltech,gpt3 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "focaltech,gpt3"; + reg = <0>; + + spi-max-frequency = <3125000>; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml new file mode 100644 index 000000000000..1b2a1baa26f9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/himax,hx8394.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Himax HX8394 MIPI-DSI LCD panel controller + +maintainers: + - Ondrej Jirman <megi@xff.cz> + - Javier Martinez Canillas <javierm@redhat.com> + +description: + Device tree bindings for panels based on the Himax HX8394 controller, + such as the HannStar HSD060BHW4 720x1440 TFT LCD panel connected with + a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - hannstar,hsd060bhw4 + - const: himax,hx8394 + + reg: true + + reset-gpios: true + + backlight: true + + port: true + + vcc-supply: + description: Panel power supply + + iovcc-supply: + description: I/O voltage supply + +required: + - compatible + - reg + - reset-gpios + - backlight + - port + - vcc-supply + - iovcc-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "hannstar,hsd060bhw4", "himax,hx8394"; + reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml index c2df8d28aaf5..9b701df5e9d2 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -22,8 +22,9 @@ description: | The standard defines the following interface signals for type C: - Power: - Vdd: Power supply for display module + Called power-supply in this binding. - Vddi: Logic level supply for interface signals - Combined into one in this binding called: power-supply + Called io-supply in this binding. - Interface: - CSx: Chip select - SCL: Serial clock @@ -80,6 +81,11 @@ properties: Controller data/command selection (D/CX) in 4-line SPI mode. If not set, the controller is in 3-line SPI mode. + io-supply: + description: | + Logic level supply for interface signals (Vddi). + No need to set if this is the same as power-supply. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml new file mode 100644 index 000000000000..49e2fd4b4e99 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/visionox,vtdr6130.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Visionox VTDR6130 AMOLED DSI Panel + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: visionox,vtdr6130 + + vddio-supply: true + vci-supply: true + vdd-supply: true + port: true + reset-gpios: true + +additionalProperties: false + +required: + - compatible + - vddio-supply + - vci-supply + - vdd-supply + - reset-gpios + - port + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + panel { + compatible = "visionox,vtdr6130"; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml index b3e588022082..d4830f52c512 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml @@ -40,6 +40,7 @@ properties: - renesas,du-r8a77990 # for R-Car E3 compatible DU - renesas,du-r8a77995 # for R-Car D3 compatible DU - renesas,du-r8a779a0 # for R-Car V3U compatible DU + - renesas,du-r8a779g0 # for R-Car V4H compatible DU reg: maxItems: 1 @@ -762,6 +763,7 @@ allOf: contains: enum: - renesas,du-r8a779a0 + - renesas,du-r8a779g0 then: properties: clocks: diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml index dd64f70b5014..3c9f29e428a4 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml @@ -63,6 +63,11 @@ properties: reg: description: Location and size of the framebuffer memory + memory-region: + maxItems: 1 + description: Phandle to a node describing the memory to be used for the + framebuffer. If present, overrides the "reg" property (if one exists). + clocks: description: List of clocks used by the framebuffer. @@ -94,6 +99,7 @@ properties: * `x1r5g5b5` - 16-bit pixels, d[14:10]=r, d[9:5]=g, d[4:0]=b * `x2r10g10b10` - 32-bit pixels, d[29:20]=r, d[19:10]=g, d[9:0]=b * `x8r8g8b8` - 32-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b + * `x8b8g8r8` - 32-bit pixels, d[23:16]=b, d[15:8]=g, d[7:0]=r enum: - a1r5g5b5 - a2r10g10b10 @@ -105,6 +111,7 @@ properties: - x1r5g5b5 - x2r10g10b10 - x8r8g8b8 + - x8b8g8r8 display: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml index c46378efc123..92e899905ef8 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml @@ -16,7 +16,7 @@ properties: compatible: items: - enum: - - renesas,i2c-r9a09g011 # RZ/V2M + - renesas,r9a09g011-i2c # RZ/V2M - const: renesas,rzv2m-i2c reg: @@ -66,7 +66,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> i2c0: i2c@a4030000 { - compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c"; + compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c"; reg = <0xa4030000 0x80>; interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml index 4b37aa88a375..5e6be4e79201 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml @@ -84,7 +84,6 @@ allOf: - qcom,msm8939-pcnoc - qcom,msm8939-snoc - qcom,msm8996-a1noc - - qcom,msm8996-a2noc - qcom,msm8996-bimc - qcom,msm8996-cnoc - qcom,msm8996-pnoc @@ -191,6 +190,29 @@ allOf: compatible: contains: enum: + - qcom,msm8996-a2noc + + then: + properties: + clock-names: + items: + - const: bus + - const: bus_a + - const: aggre2_ufs_axi + - const: ufs_axi + + clocks: + items: + - description: Bus Clock + - description: Bus A Clock + - description: Aggregate2 NoC UFS AXI Clock + - description: UFS AXI Clock + + - if: + properties: + compatible: + contains: + enum: - qcom,sdm660-a2noc then: diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 1432fda3b603..47bc2057e629 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -40,6 +40,9 @@ properties: clock-names: const: stmmaceth + phy-supply: + description: PHY regulator + syscon: $ref: /schemas/types.yaml#/definitions/phandle description: diff --git a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml index d2906b4a0f59..e35da8b01dc2 100644 --- a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml +++ b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml @@ -16,9 +16,6 @@ description: | 8k has a second unit which provides an interface with the xMDIO bus. This driver handles these interfaces. -allOf: - - $ref: "mdio.yaml#" - properties: compatible: enum: @@ -39,13 +36,38 @@ required: - compatible - reg +allOf: + - $ref: mdio.yaml# + + - if: + required: + - interrupts + + then: + properties: + reg: + items: + - items: + - $ref: /schemas/types.yaml#/definitions/cell + - const: 0x84 + + else: + properties: + reg: + items: + - items: + - $ref: /schemas/types.yaml#/definitions/cell + - enum: + - 0x4 + - 0x10 + unevaluatedProperties: false examples: - | mdio@d0072004 { compatible = "marvell,orion-mdio"; - reg = <0xd0072004 0x4>; + reg = <0xd0072004 0x84>; #address-cells = <1>; #size-cells = <0>; interrupts = <30>; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml index f3a5fbabbbb5..bb01c6b34dab 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml @@ -2,7 +2,7 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb2-phy.yaml#" +$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb2-phy.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic G12A USB2 PHY @@ -13,8 +13,8 @@ maintainers: properties: compatible: enum: - - amlogic,meson-g12a-usb2-phy - - amlogic,meson-a1-usb2-phy + - amlogic,g12a-usb2-phy + - amlogic,a1-usb2-phy reg: maxItems: 1 @@ -68,7 +68,7 @@ additionalProperties: false examples: - | phy@36000 { - compatible = "amlogic,meson-g12a-usb2-phy"; + compatible = "amlogic,g12a-usb2-phy"; reg = <0x36000 0x2000>; clocks = <&xtal>; clock-names = "xtal"; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml index 868b4e6fde71..129d26e99776 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml @@ -2,7 +2,7 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml#" +$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb3-pcie-phy.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic G12A USB3 + PCIE Combo PHY @@ -13,7 +13,7 @@ maintainers: properties: compatible: enum: - - amlogic,meson-g12a-usb3-pcie-phy + - amlogic,g12a-usb3-pcie-phy reg: maxItems: 1 @@ -49,7 +49,7 @@ additionalProperties: false examples: - | phy@46000 { - compatible = "amlogic,meson-g12a-usb3-pcie-phy"; + compatible = "amlogic,g12a-usb3-pcie-phy"; reg = <0x46000 0x2000>; clocks = <&ref_clk>; clock-names = "ref_clk"; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml index abcc4373f39e..ca6a0836b53c 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml @@ -16,7 +16,6 @@ properties: compatible: enum: - qcom,usb-hs-28nm-femtophy - - qcom,usb-hs-28nm-mdm9607 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml index 01f9d4e236e9..a7feb497eb89 100644 --- a/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml @@ -19,8 +19,8 @@ description: | additional information and example. patternProperties: - # 25 LDOs - "^LDO([1-9]|[1][0-9]|2[0-5])$": + # 25 LDOs, without LDO10-12 + "^LDO([1-9]|1[3-9]|2[0-5])$": type: object $ref: regulator.yaml# unevaluatedProperties: false @@ -30,6 +30,23 @@ patternProperties: required: - regulator-name + "^LDO(1[0-2])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + properties: + samsung,ext-control-gpios: + maxItems: 1 + description: + LDO10, LDO11 and LDO12 can be configured to external control over + GPIO. + + required: + - regulator-name + # 5 bucks "^BUCK[1-5]$": type: object diff --git a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml new file mode 100644 index 000000000000..05b6648b3458 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reserved-memory/framebuffer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: /reserved-memory framebuffer node bindings + +maintainers: + - devicetree-spec@vger.kernel.org + +allOf: + - $ref: reserved-memory.yaml + +properties: + compatible: + const: framebuffer + description: > + This indicates a region of memory meant to be used as a framebuffer for + a set of display devices. It can be used by an operating system to keep + the framebuffer from being overwritten and use it as the backing memory + for a display device (such as simple-framebuffer). + +unevaluatedProperties: false + +examples: + - | + / { + compatible = "foo"; + model = "foo"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + framebuffer { + compatible = "simple-framebuffer"; + memory-region = <&fb>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + fb: framebuffer@80000000 { + compatible = "framebuffer"; + reg = <0x80000000 0x007e9000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index c6720764e765..a2884e3113da 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -83,7 +83,7 @@ properties: insensitive, letters in the riscv,isa string must be all lowercase to simplify parsing. $ref: "/schemas/types.yaml#/definitions/string" - pattern: ^rv(?:64|32)imaf?d?q?c?b?v?k?h?(?:_[hsxz](?:[a-z])+)*$ + pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$ # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: false diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml index 290555426c39..bdf482db32aa 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml @@ -39,8 +39,8 @@ properties: qcom,protection-domain: $ref: /schemas/types.yaml#/definitions/string-array description: | - Protection domain service name and path for APR service - possible values are:: + Protection domain service name and path for APR service (if supported). + Possible values are:: "avs/audio", "msm/adsp/audio_pd". "kernel/elf_loader", "msm/modem/wlan_pd". "tms/servreg", "msm/adsp/audio_pd". @@ -49,6 +49,5 @@ properties: required: - reg - - qcom,protection-domain additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/everest,es8326.yaml b/Documentation/devicetree/bindings/sound/everest,es8326.yaml index 07781408e788..07781408e788 100755..100644 --- a/Documentation/devicetree/bindings/sound/everest,es8326.yaml +++ b/Documentation/devicetree/bindings/sound/everest,es8326.yaml diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml index 9d3139990237..aa23b0024c46 100644 --- a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml +++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - mediatek,mt8186-mt6366-rt1019-rt5682s-sound + - mediatek,mt8186-mt6366-rt5682s-max98360-sound mediatek,platform: $ref: "/schemas/types.yaml#/definitions/phandle" diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml index 66431aade3b7..da5f70910da5 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml @@ -30,7 +30,9 @@ properties: const: 0 clocks: - maxItems: 5 + oneOf: + - maxItems: 3 + - maxItems: 5 clock-names: oneOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml index 2bf8d082f8f1..66cbb1f5e31a 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml @@ -9,9 +9,6 @@ title: LPASS(Low Power Audio Subsystem) VA Macro audio codec maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> -allOf: - - $ref: dai-common.yaml# - properties: compatible: enum: @@ -30,15 +27,12 @@ properties: const: 0 clocks: - maxItems: 5 + minItems: 5 + maxItems: 6 clock-names: - items: - - const: mclk - - const: npl - - const: macro - - const: dcodec - - const: fsgen + minItems: 5 + maxItems: 6 clock-output-names: maxItems: 1 @@ -55,10 +49,51 @@ required: - reg - "#sound-dai-cells" +allOf: + - $ref: dai-common.yaml# + + - if: + properties: + compatible: + enum: + - qcom,sc7280-lpass-wsa-macro + - qcom,sm8450-lpass-wsa-macro + - qcom,sc8280xp-lpass-wsa-macro + then: + properties: + clocks: + maxItems: 5 + clock-names: + items: + - const: mclk + - const: npl + - const: macro + - const: dcodec + - const: fsgen + + - if: + properties: + compatible: + enum: + - qcom,sm8250-lpass-wsa-macro + then: + properties: + clocks: + minItems: 6 + clock-names: + items: + - const: mclk + - const: npl + - const: macro + - const: dcodec + - const: va + - const: fsgen + unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h> #include <dt-bindings/sound/qcom,q6afe.h> codec@3240000 { compatible = "qcom,sm8250-lpass-wsa-macro"; @@ -69,7 +104,8 @@ examples: <&audiocc 0>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&aoncc LPASS_CDC_VA_MCLK>, <&vamacro>; - clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; clock-output-names = "mclk"; }; diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml index bcbfa71536cd..3efdc192ab01 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -80,7 +80,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 5 + maxItems: 8 qcom,ports-sinterval-low: $ref: /schemas/types.yaml#/definitions/uint8-array @@ -124,7 +124,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 5 + maxItems: 8 qcom,ports-block-pack-mode: $ref: /schemas/types.yaml#/definitions/uint8-array @@ -154,7 +154,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 5 + maxItems: 8 items: oneOf: - minimum: 0 @@ -171,7 +171,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 5 + maxItems: 8 items: oneOf: - minimum: 0 @@ -187,7 +187,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 5 + maxItems: 8 items: oneOf: - minimum: 0 diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml index 4dd973e341e6..6c57dd6c3a36 100644 --- a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml +++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel SPI device maintainers: - - Tudor Ambarus <tudor.ambarus@microchip.com> + - Tudor Ambarus <tudor.ambarus@linaro.org> allOf: - $ref: spi-controller.yaml# diff --git a/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml b/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml index 1d493add4053..b0d99bc10535 100644 --- a/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml +++ b/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Quad Serial Peripheral Interface (QSPI) maintainers: - - Tudor Ambarus <tudor.ambarus@microchip.com> + - Tudor Ambarus <tudor.ambarus@linaro.org> allOf: - $ref: spi-controller.yaml# diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index ead2cccf658f..9a60c0664bbe 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -44,9 +44,9 @@ properties: description: Maximum SPI clocking speed of the device in Hz. - spi-cs-setup-ns: + spi-cs-setup-delay-ns: description: - Delay in nanosecods to be introduced by the controller after CS is + Delay in nanoseconds to be introduced by the controller after CS is asserted. spi-rx-bus-width: |