diff options
Diffstat (limited to 'Documentation/devicetree')
8 files changed, 288 insertions, 20 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml index 986df1a6ff0a..034b69614416 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml @@ -4,19 +4,21 @@ $id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM/Kionix KX022A Accelerometer +title: ROHM/Kionix KX022A and KX132-1211 Accelerometers maintainers: - Matti Vaittinen <mazziesaccount@gmail.com> description: | - KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges, - output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering. - KX022A can be accessed either via I2C or SPI. + KX022A and KX132-1211 are 3-axis accelerometers supporting +/- 2G, 4G, 8G and + 16G ranges, variable output data-rates and a hardware-fifo buffering. + KX022A and KX132-1211 can be accessed either via I2C or SPI. properties: compatible: - const: kionix,kx022a + enum: + - kionix,kx022a + - kionix,kx132-1211 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml index 875f394576c2..5cc6a9684077 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml @@ -4,21 +4,31 @@ $id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Linear Technology / Analog Devices LTC2497 ADC +title: Linear Technology / Analog Devices LTC2497 and LTC2309 ADC maintainers: - Michael Hennerich <michael.hennerich@analog.com> + - Liam Beguin <liambeguin@gmail.com> description: | - 16bit ADC supporting up to 16 single ended or 8 differential inputs. - I2C interface. + LTC2309: + low noise, low power, 8-channel, 12-bit successive approximation ADC with an + I2C compatible serial interface. - https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf - https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2309fd.pdf + + LTC2497: + LTC2499: + 16bit ADC supporting up to 16 single ended or 8 differential inputs. + I2C interface. + + https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf properties: compatible: enum: + - lltc,ltc2309 - lltc,ltc2497 - lltc,ltc2499 diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml new file mode 100644 index 000000000000..675319276197 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3564.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP346X and MCP356X ADC Family + +maintainers: + - Marius Cristea <marius.cristea@microchip.com> + +description: | + Bindings for the Microchip family of 153.6 ksps, Low-Noise 16/24-Bit + Delta-Sigma ADCs with an SPI interface. Datasheet can be found here: + Datasheet for MCP3561, MCP3562, MCP3564 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP3561-2-4-Family-Data-Sheet-DS20006181C.pdf + Datasheet for MCP3561R, MCP3562R, MCP3564R can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf + Datasheet for MCP3461, MCP3462, MCP3464 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf + Datasheet for MCP3461R, MCP3462R, MCP3464R can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4R-Family-Data-Sheet-DS20006404C.pdf + +properties: + compatible: + enum: + - microchip,mcp3461 + - microchip,mcp3462 + - microchip,mcp3464 + - microchip,mcp3461r + - microchip,mcp3462r + - microchip,mcp3464r + - microchip,mcp3561 + - microchip,mcp3562 + - microchip,mcp3564 + - microchip,mcp3561r + - microchip,mcp3562r + - microchip,mcp3564r + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 20000000 + + spi-cpha: true + + spi-cpol: true + + vdd-supply: true + + avdd-supply: true + + clocks: + description: + Phandle and clock identifier for external sampling clock. + If not specified, the internal crystal oscillator will be used. + maxItems: 1 + + interrupts: + description: IRQ line of the ADC + maxItems: 1 + + drive-open-drain: + description: + Whether to drive the IRQ signal as push-pull (default) or open-drain. Note + that the device requires this pin to become "high", otherwise it will stop + converting. + type: boolean + + vref-supply: + description: + Some devices have a specific reference voltage supplied on a different + pin to the other supplies. Needed to be able to establish channel scaling + unless there is also an internal reference available (e.g. mcp3564r). In + case of "r" devices (e. g. mcp3564r), if it does not exists the internal + reference will be used. + + microchip,hw-device-address: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + description: + The address is set on a per-device basis by fuses in the factory, + configured on request. If not requested, the fuses are set for 0x1. + The device address is part of the device markings to avoid + potential confusion. This address is coded on two bits, so four possible + addresses are available when multiple devices are present on the same + SPI bus with only one Chip Select line for all devices. + Each device communication starts by a CS falling edge, followed by the + clocking of the device address (BITS[7:6] - top two bits of COMMAND BYTE + which is first one on the wire). + + "#io-channel-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@([0-9]|([1-7][0-9]))$": + $ref: adc.yaml + type: object + unevaluatedProperties: false + description: Represents the external channels which are connected to the ADC. + + properties: + reg: + description: The channel number in single-ended and differential mode. + minimum: 0 + maximum: 79 + + required: + - reg + +dependencies: + spi-cpol: [ spi-cpha ] + spi-cpha: [ spi-cpol ] + +required: + - compatible + - reg + - microchip,hw-device-address + - spi-max-frequency + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - # External vref, no internal reference + if: + properties: + compatible: + contains: + enum: + - microchip,mcp3461 + - microchip,mcp3462 + - microchip,mcp3464 + - microchip,mcp3561 + - microchip,mcp3562 + - microchip,mcp3564 + then: + required: + - vref-supply + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "microchip,mcp3564r"; + reg = <0>; + vref-supply = <&vref_reg>; + spi-cpha; + spi-cpol; + spi-max-frequency = <10000000>; + microchip,hw-device-address = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + /* CH0 to AGND */ + reg = <0>; + label = "CH0"; + }; + + channel@1 { + /* CH1 to AGND */ + reg = <1>; + label = "CH1"; + }; + + /* diff-channels */ + channel@11 { + reg = <11>; + + /* CN0, CN1 */ + diff-channels = <0 1>; + label = "CH0_CH1"; + }; + + channel@22 { + reg = <0x22>; + + /* CN1, CN2 */ + diff-channels = <1 2>; + label = "CH1_CH3"; + }; + + channel@23 { + reg = <0x23>; + + /* CN1, CN3 */ + diff-channels = <1 3>; + label = "CH1_CH3"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index f7b3fde4115a..06951ec5f5da 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -18,7 +18,13 @@ description: | properties: compatible: enum: + - microchip,mcp3910 - microchip,mcp3911 + - microchip,mcp3912 + - microchip,mcp3913 + - microchip,mcp3914 + - microchip,mcp3918 + - microchip,mcp3919 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml index e004659099c1..d605999ffe28 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml @@ -23,6 +23,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml new file mode 100644 index 000000000000..e779a8986e0b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,twl6030-gpadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPADC subsystem in the TWL6030 power module + +maintainers: + - Andreas Kemnade <andreas@kemnade.info> + +description: + The GPADC subsystem in the TWL603X consists of a 10-bit ADC + combined with a 15-input analog multiplexer in the TWL6030 resp. a + 19-input analog muliplexer in the TWL6032. + +properties: + compatible: + enum: + - ti,twl6030-gpadc + - ti,twl6032-gpadc + + interrupts: + maxItems: 1 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - interrupts + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + gpadc { + compatible = "ti,twl6030-gpadc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 9fda56fa49c3..2ee6080deac7 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -4,20 +4,26 @@ $id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: HMC425A 6-bit Digital Step Attenuator +title: Analog Devices HMC425A and similar Digital Step Attenuators maintainers: - Michael Hennerich <michael.hennerich@analog.com> description: | - Digital Step Attenuator IIO device with gpio interface. + Digital Step Attenuator IIO devices with gpio interface. + Offer various frequency and attenuation ranges. HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz - https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + + HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf + properties: compatible: enum: - adi,hmc425a + - adi,hmc540s vcc-supply: true diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml index 9790f75fc669..ee77558e9800 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml @@ -18,13 +18,6 @@ properties: - asahi-kasei,ak09911 - asahi-kasei,ak09912 - asahi-kasei,ak09916 - - enum: - - ak8975 - - ak8963 - - ak09911 - - ak09912 - - ak09916 - deprecated: true reg: maxItems: 1 |