diff options
Diffstat (limited to 'Documentation/devicetree')
4 files changed, 9 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt index 2210f4359c45..8347b1e7c080 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -18,8 +18,10 @@ Optional properties: - dma-names: should contain "tx" and "rx". - atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO capable I2C controllers. -- i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c" - and "atmel,sama5d2-i2c". +- i2c-sda-hold-time-ns: TWD hold time, only available for: + "atmel,sama5d4-i2c", + "atmel,sama5d2-i2c", + "microchip,sam9x60-i2c". - Child nodes conforming to i2c bus binding Examples : diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 27e1b4cebfbd..6bdcc3f84bd3 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -10,7 +10,6 @@ Required properties: - #size-cells: 0 - spi-max-frequency: Maximum frequency of the SPI bus the chip can operate at should be less than or equal to 18 MHz. - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. - interrupt-parent: the phandle to the interrupt controller which provides the interrupt. - interrupts: interrupt specification for data-ready. @@ -23,6 +22,7 @@ Optional properties: reset. - device-state-gpios: Input GPIO that indicates if the device is in a sleep state or if the device is active. + - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Example: tcan4x5x: tcan4x5x@0 { @@ -36,5 +36,5 @@ tcan4x5x: tcan4x5x@0 { interrupts = <14 GPIO_ACTIVE_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 4845e29411e4..e08cd4c4d568 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -347,6 +347,7 @@ allOf: - st,spear600-gmac then: + properties: snps,tso: $ref: /schemas/types.yaml#definitions/flag description: diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 732339275848..1e0ca6ccf64b 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -111,7 +111,7 @@ patternProperties: spi-rx-bus-width: allOf: - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4 ] + - enum: [ 1, 2, 4, 8 ] - default: 1 description: Bus width to the SPI bus used for MISO. @@ -123,7 +123,7 @@ patternProperties: spi-tx-bus-width: allOf: - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4 ] + - enum: [ 1, 2, 4, 8 ] - default: 1 description: Bus width to the SPI bus used for MOSI. |