diff options
Diffstat (limited to 'Documentation/devicetree')
16 files changed, 216 insertions, 13 deletions
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt new file mode 100644 index 000000000000..02b226532ebd --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,komeda.txt @@ -0,0 +1,73 @@ +Device Tree bindings for Arm Komeda display driver + +Required properties: +- compatible: Should be "arm,mali-d71" +- reg: Physical base address and length of the registers in the system +- interrupts: the interrupt line number of the device in the system +- clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' +- clock-names: A list of clock names. It should contain: + - "mclk": for the main processor clock + - "pclk": for the APB interface clock +- #address-cells: Must be 1 +- #size-cells: Must be 0 + +Required properties for sub-node: pipeline@nq +Each device contains one or two pipeline sub-nodes (at least one), each +pipeline node should provide properties: +- reg: Zero-indexed identifier for the pipeline +- clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' +- clock-names: should contain: + - "pxclk": pixel clock + - "aclk": AXI interface clock + +- port: each pipeline connect to an encoder input port. The connection is + modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt + +Optional properties: + - memory-region: phandle to a node describing memory (see + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) + to be used for the framebuffer; if not present, the framebuffer may + be located anywhere in memory. + +Example: +/ { + ... + + dp0: display@c00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,mali-d71"; + reg = <0xc00000 0x20000>; + interrupts = <0 168 4>; + clocks = <&dpu_mclk>, <&dpu_aclk>; + clock-names = "mclk", "pclk"; + + dp0_pipe0: pipeline@0 { + clocks = <&fpgaosc2>, <&dpu_aclk>; + clock-names = "pxclk", "aclk"; + reg = <0>; + + port { + dp0_pipe0_out: endpoint { + remote-endpoint = <&db_dvi0_in>; + }; + }; + }; + + dp0_pipe1: pipeline@1 { + clocks = <&fpgaosc2>, <&dpu_aclk>; + clock-names = "pxclk", "aclk"; + reg = <1>; + + port { + dp0_pipe1_out: endpoint { + remote-endpoint = <&db_dvi1_in>; + }; + }; + }; + }; + ... +}; diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt index 50220190c203..60091db5dfa5 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt +++ b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt @@ -22,13 +22,11 @@ among others. Required properties: -- compatible: Must be one or more of the following - - "ti,ds90c185" for the TI DS90C185 FPD-Link Serializer - - "lvds-encoder" for a generic LVDS encoder device +- compatible: Must be "lvds-encoder" - When compatible with the generic version, nodes must list the - device-specific version corresponding to the device first - followed by the generic version. + Any encoder compatible with this generic binding, but with additional + properties not listed here, must list a device specific compatible first + followed by this generic compatible. Required nodes: @@ -44,8 +42,6 @@ Example lvds-encoder { compatible = "lvds-encoder"; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt index ba5469dd09f3..900a884ad9f5 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt @@ -8,6 +8,8 @@ Required properties: - compatible : Shall contain one of - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders + - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders + - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders @@ -25,7 +27,7 @@ Required properties: - clock-names: Name of the clocks. This property is model-dependent. - The functional clock, which mandatory for all models, shall be listed first, and shall be named "fck". - - On R8A77990 and R8A77995, the LVDS encoder can use the EXTAL or + - On R8A77990, R8A77995 and R8A774C0, the LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN numerical index. diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt index 527e236e9a2a..fee3c88e1a17 100644 --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt @@ -10,7 +10,7 @@ Required properties: Optional properties: -- pwdn-gpios: Power down control GPIO +- powerdown-gpios: Power down control GPIO (the /PWDN pin, active low). Required nodes: diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt new file mode 100644 index 000000000000..e575f996959a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt @@ -0,0 +1,55 @@ +Texas Instruments FPD-Link (LVDS) Serializer +-------------------------------------------- + +The DS90C185 and DS90C187 are low-power serializers for portable +battery-powered applications that reduces the size of the RGB +interface between the host GPU and the display. + +Required properties: + +- compatible: Should be + "ti,ds90c185", "lvds-encoder" for the TI DS90C185 FPD-Link Serializer + "ti,ds90c187", "lvds-encoder" for the TI DS90C187 FPD-Link Serializer + +Optional properties: + +- powerdown-gpios: Power down control GPIO (the PDB pin, active-low) + +Required nodes: + +The devices have two video ports. Their connections are modeled using the OF +graph bindings specified in Documentation/devicetree/bindings/graph.txt. + +- Video port 0 for parallel input +- Video port 1 for LVDS output + + +Example +------- + +lvds-encoder { + compatible = "ti,ds90c185", "lvds-encoder"; + + powerdown-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_enc_in: endpoint { + remote-endpoint = <&lcdc_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + + lvds_enc_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010 b/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt index bc6a0c858e23..bc6a0c858e23 100644 --- a/Documentation/devicetree/bindings/display/panel/auo,g101evn010 +++ b/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.txt b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.txt new file mode 100644 index 000000000000..e5ca4ccd55ed --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.txt @@ -0,0 +1,7 @@ +Innolux Corporation 10.1" EE101IA-01D WXGA (1280x800) LVDS panel + +Required properties: +- compatible: should be "innolux,ee101ia-01d" + +This binding is compatible with the lvds-panel binding, which is specified +in panel-lvds.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt b/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt new file mode 100644 index 000000000000..74ee7ea6b493 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt @@ -0,0 +1,12 @@ +LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel + +Required properties: +- compatible: should be "lemaker,bl035-rgb-002" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.txt b/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.txt new file mode 100644 index 000000000000..1639fb17a9f0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.txt @@ -0,0 +1,14 @@ +PDA 91-00156-A0 5.0" WVGA TFT LCD panel + +Required properties: +- compatible: should be "pda,91-00156-a0" +- power-supply: this panel requires a single power supply. A phandle to a +regulator needs to be specified here. Compatible with panel-common binding which +is specified in the panel-common.txt in this directory. +- backlight: this panel's backlight is controlled by an external backlight +controller. A phandle to this controller needs to be specified here. +Compatible with panel-common binding which is specified in the panel-common.txt +in this directory. + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt new file mode 100644 index 000000000000..ccd17597f1f6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt @@ -0,0 +1,30 @@ +Sitronix ST7701 based LCD panels + +ST7701 designed for small and medium sizes of TFT LCD display, is +capable of supporting up to 480RGBX864 in resolution. It provides +several system interfaces like MIPI/RGB/SPI. + +Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has +inbuilt ST7701 chip. + +Required properties: +- compatible: must be "sitronix,st7701" and one of + * "techstar,ts8550b" +- reset-gpios: a GPIO phandle for the reset pin + +Required properties for techstar,ts8550b: +- reg: DSI virtual channel used by that screen +- VCC-supply: analog regulator for MIPI circuit +- IOVCC-supply: I/O system regulator + +Optional properties: +- backlight: phandle for the backlight control. + +panel@0 { + compatible = "techstar,ts8550b", "sitronix,st7701"; + reg = <0>; + VCC-supply = <®_dldo2>; + IOVCC-supply = <®_dldo2>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; +}; diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt index 3c855d9f2719..aedb22b4d161 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -7,6 +7,7 @@ Required Properties: - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU + - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU @@ -57,6 +58,7 @@ corresponding to each DU output. R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 - + R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt index b79e5769f0ae..4f58c5a2d195 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt @@ -10,6 +10,7 @@ Required properties: "rockchip,rk3126-vop"; "rockchip,px30-vop-lit"; "rockchip,px30-vop-big"; + "rockchip,rk3066-vop"; "rockchip,rk3188-vop"; "rockchip,rk3288-vop"; "rockchip,rk3368-vop"; diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index f426bdb42f18..31ab72cba3d4 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -156,6 +156,7 @@ Required properties: * allwinner,sun6i-a31-tcon * allwinner,sun6i-a31s-tcon * allwinner,sun7i-a20-tcon + * allwinner,sun8i-a23-tcon * allwinner,sun8i-a33-tcon * allwinner,sun8i-a83t-tcon-lcd * allwinner,sun8i-a83t-tcon-tv @@ -276,6 +277,7 @@ Required properties: - compatible: value must be one of: * allwinner,sun6i-a31-drc * allwinner,sun6i-a31s-drc + * allwinner,sun8i-a23-drc * allwinner,sun8i-a33-drc * allwinner,sun9i-a80-drc - reg: base address and size of the memory-mapped region. @@ -303,6 +305,7 @@ Required properties: * allwinner,sun5i-a13-display-backend * allwinner,sun6i-a31-display-backend * allwinner,sun7i-a20-display-backend + * allwinner,sun8i-a23-display-backend * allwinner,sun8i-a33-display-backend * allwinner,sun9i-a80-display-backend - reg: base address and size of the memory-mapped region. @@ -360,6 +363,7 @@ Required properties: * allwinner,sun5i-a13-display-frontend * allwinner,sun6i-a31-display-frontend * allwinner,sun7i-a20-display-frontend + * allwinner,sun8i-a23-display-frontend * allwinner,sun8i-a33-display-frontend * allwinner,sun9i-a80-display-frontend - reg: base address and size of the memory-mapped region. @@ -419,6 +423,7 @@ Required properties: * allwinner,sun6i-a31-display-engine * allwinner,sun6i-a31s-display-engine * allwinner,sun7i-a20-display-engine + * allwinner,sun8i-a23-display-engine * allwinner,sun8i-a33-display-engine * allwinner,sun8i-a83t-display-engine * allwinner,sun8i-h3-display-engine diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 593be44a53c9..9999255ac5b6 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -238,6 +238,9 @@ of the following host1x client modules: - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection - nvidia,edid: supplies a binary EDID blob - nvidia,panel: phandle of a display panel + - nvidia,xbar-cfg: 5 cells containing the crossbar configuration. Each lane + of the SOR, identified by the cell's index, is mapped via the crossbar to + the pad specified by the cell's value. Optional properties when driving an eDP output: - nvidia,dpaux: phandle to a DispayPort AUX interface diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.txt b/Documentation/devicetree/bindings/gpu/samsung-rotator.txt index 82cd1ed0be93..3aca2578da0b 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-rotator.txt +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.txt @@ -2,9 +2,10 @@ Required properties: - compatible : value should be one of the following: - (a) "samsung,exynos4210-rotator" for Rotator IP in Exynos4210 - (b) "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412 - (c) "samsung,exynos5250-rotator" for Rotator IP in Exynos5250 + * "samsung,s5pv210-rotator" for Rotator IP in S5PV210 + * "samsung,exynos4210-rotator" for Rotator IP in Exynos4210 + * "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412 + * "samsung,exynos5250-rotator" for Rotator IP in Exynos5250 - reg : Physical base address of the IP registers and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 389508584f48..4f225ce815d8 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -211,6 +211,7 @@ laird Laird PLC lantiq Lantiq Semiconductor lattice Lattice Semiconductor lego LEGO Systems A/S +lemaker Shenzhen LeMaker Technology Co., Ltd. lenovo Lenovo Group Ltd. lg LG Corporation libretech Shenzhen Libre Technology Co., Ltd @@ -297,6 +298,7 @@ ovti OmniVision Technologies oxsemi Oxford Semiconductor, Ltd. panasonic Panasonic Corporation parade Parade Technologies Inc. +pda Precision Design Associates, Inc. pericom Pericom Technology Inc. pervasive Pervasive Displays, Inc. phicomm PHICOMM Co., Ltd. |