1 files changed, 0 insertions, 108 deletions
diff --git a/Documentation/driver-api/pti_intel_mid.rst b/Documentation/driver-api/pti_intel_mid.rst
deleted file mode 100644
index bacc2a4ee89f..000000000000
--- a/Documentation/driver-api/pti_intel_mid.rst
+++ /dev/null
@@ -1,108 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=============
-Intel MID PTI
-=============
-
-The Intel MID PTI project is HW implemented in Intel Atom
-system-on-a-chip designs based on the Parallel Trace
-Interface for MIPI P1149.7 cJTAG standard.  The kernel solution
-for this platform involves the following files::
-
-	./include/linux/pti.h
-	./drivers/.../n_tracesink.h
-	./drivers/.../n_tracerouter.c
-	./drivers/.../n_tracesink.c
-	./drivers/.../pti.c
-
-pti.c is the driver that enables various debugging features
-popular on platforms from certain mobile manufacturers.
-n_tracerouter.c and n_tracesink.c allow extra system information to
-be collected and routed to the pti driver, such as trace
-debugging data from a modem.  Although n_tracerouter
-and n_tracesink are a part of the complete PTI solution,
-these two line disciplines can work separately from
-pti.c and route any data stream from one /dev/tty node
-to another /dev/tty node via kernel-space.  This provides
-a stable, reliable connection that will not break unless
-the user-space application shuts down (plus avoids
-kernel->user->kernel context switch overheads of routing
-data).
-
-An example debugging usage for this driver system:
-
-  * Hook /dev/ttyPTI0 to syslogd.  Opening this port will also start
-    a console device to further capture debugging messages to PTI.
-  * Hook /dev/ttyPTI1 to modem debugging data to write to PTI HW.
-    This is where n_tracerouter and n_tracesink are used.
-  * Hook /dev/pti to a user-level debugging application for writing
-    to PTI HW.
-  * `Use mipi_` Kernel Driver API in other device drivers for
-    debugging to PTI by first requesting a PTI write address via
-    mipi_request_masterchannel(1).
-
-Below is example pseudo-code on how a 'privileged' application
-can hook up n_tracerouter and n_tracesink to any tty on
-a system.  'Privileged' means the application has enough
-privileges to successfully manipulate the ldisc drivers
-but is not just blindly executing as 'root'. Keep in mind
-the use of ioctl(,TIOCSETD,) is not specific to the n_tracerouter
-and n_tracesink line discpline drivers but is a generic
-operation for a program to use a line discpline driver
-on a tty port other than the default n_tty:
-
-.. code-block:: c
-
-  /////////// To hook up n_tracerouter and n_tracesink /////////
-
-  // Note that n_tracerouter depends on n_tracesink.
-  #include <errno.h>
-  #define ONE_TTY "/dev/ttyOne"
-  #define TWO_TTY "/dev/ttyTwo"
-
-  // needed global to hand onto ldisc connection
-  static int g_fd_source = -1;
-  static int g_fd_sink  = -1;
-
-  // these two vars used to grab LDISC values from loaded ldisc drivers
-  // in OS.  Look at /proc/tty/ldiscs to get the right numbers from
-  // the ldiscs loaded in the system.
-  int source_ldisc_num, sink_ldisc_num = -1;
-  int retval;
-
-  g_fd_source = open(ONE_TTY, O_RDWR); // must be R/W
-  g_fd_sink   = open(TWO_TTY, O_RDWR); // must be R/W
-
-  if (g_fd_source <= 0) || (g_fd_sink <= 0) {
-     // doubt you'll want to use these exact error lines of code
-     printf("Error on open(). errno: %d\n",errno);
-     return errno;
-  }
-
-  retval = ioctl(g_fd_sink, TIOCSETD, &sink_ldisc_num);
-  if (retval < 0) {
-     printf("Error on ioctl().  errno: %d\n", errno);
-     return errno;
-  }
-
-  retval = ioctl(g_fd_source, TIOCSETD, &source_ldisc_num);
-  if (retval < 0) {
-     printf("Error on ioctl().  errno: %d\n", errno);
-     return errno;
-  }
-
-  /////////// To disconnect n_tracerouter and n_tracesink ////////
-
-  // First make sure data through the ldiscs has stopped.
-
-  // Second, disconnect ldiscs.  This provides a
-  // little cleaner shutdown on tty stack.
-  sink_ldisc_num = 0;
-  source_ldisc_num = 0;
-  ioctl(g_fd_uart, TIOCSETD, &sink_ldisc_num);
-  ioctl(g_fd_gadget, TIOCSETD, &source_ldisc_num);
-
-  // Three, program closes connection, and cleanup:
-  close(g_fd_uart);
-  close(g_fd_gadget);
-  g_fd_uart = g_fd_gadget = NULL;