diff options
Diffstat (limited to 'Documentation/filesystems')
-rw-r--r-- | Documentation/filesystems/cifs/index.rst | 10 | ||||
-rw-r--r-- | Documentation/filesystems/cifs/ksmbd.rst | 165 | ||||
-rw-r--r-- | Documentation/filesystems/index.rst | 2 | ||||
-rw-r--r-- | Documentation/filesystems/locking.rst | 79 | ||||
-rw-r--r-- | Documentation/filesystems/mandatory-locking.rst | 188 |
5 files changed, 229 insertions, 215 deletions
diff --git a/Documentation/filesystems/cifs/index.rst b/Documentation/filesystems/cifs/index.rst new file mode 100644 index 000000000000..1c8597a679ab --- /dev/null +++ b/Documentation/filesystems/cifs/index.rst @@ -0,0 +1,10 @@ +=============================== +CIFS +=============================== + + +.. toctree:: + :maxdepth: 1 + + ksmbd + cifsroot diff --git a/Documentation/filesystems/cifs/ksmbd.rst b/Documentation/filesystems/cifs/ksmbd.rst new file mode 100644 index 000000000000..a1326157d53f --- /dev/null +++ b/Documentation/filesystems/cifs/ksmbd.rst @@ -0,0 +1,165 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================== +KSMBD - SMB3 Kernel Server +========================== + +KSMBD is a linux kernel server which implements SMB3 protocol in kernel space +for sharing files over network. + +KSMBD architecture +================== + +The subset of performance related operations belong in kernelspace and +the other subset which belong to operations which are not really related with +performance in userspace. So, DCE/RPC management that has historically resulted +into number of buffer overflow issues and dangerous security bugs and user +account management are implemented in user space as ksmbd.mountd. +File operations that are related with performance (open/read/write/close etc.) +in kernel space (ksmbd). This also allows for easier integration with VFS +interface for all file operations. + +ksmbd (kernel daemon) +--------------------- + +When the server daemon is started, It starts up a forker thread +(ksmbd/interface name) at initialization time and open a dedicated port 445 +for listening to SMB requests. Whenever new clients make request, Forker +thread will accept the client connection and fork a new thread for dedicated +communication channel between the client and the server. It allows for parallel +processing of SMB requests(commands) from clients as well as allowing for new +clients to make new connections. Each instance is named ksmbd/1~n(port number) +to indicate connected clients. Depending on the SMB request types, each new +thread can decide to pass through the commands to the user space (ksmbd.mountd), +currently DCE/RPC commands are identified to be handled through the user space. +To further utilize the linux kernel, it has been chosen to process the commands +as workitems and to be executed in the handlers of the ksmbd-io kworker threads. +It allows for multiplexing of the handlers as the kernel take care of initiating +extra worker threads if the load is increased and vice versa, if the load is +decreased it destroys the extra worker threads. So, after connection is +established with client. Dedicated ksmbd/1..n(port number) takes complete +ownership of receiving/parsing of SMB commands. Each received command is worked +in parallel i.e., There can be multiple clients commands which are worked in +parallel. After receiving each command a separated kernel workitem is prepared +for each command which is further queued to be handled by ksmbd-io kworkers. +So, each SMB workitem is queued to the kworkers. This allows the benefit of load +sharing to be managed optimally by the default kernel and optimizing client +performance by handling client commands in parallel. + +ksmbd.mountd (user space daemon) +-------------------------------- + +ksmbd.mountd is userspace process to, transfer user account and password that +are registered using ksmbd.adduser(part of utils for user space). Further it +allows sharing information parameters that parsed from smb.conf to ksmbd in +kernel. For the execution part it has a daemon which is continuously running +and connected to the kernel interface using netlink socket, it waits for the +requests(dcerpc and share/user info). It handles RPC calls (at a minimum few +dozen) that are most important for file server from NetShareEnum and +NetServerGetInfo. Complete DCE/RPC response is prepared from the user space +and passed over to the associated kernel thread for the client. + + +KSMBD Feature Status +==================== + +============================== ================================================= +Feature name Status +============================== ================================================= +Dialects Supported. SMB2.1 SMB3.0, SMB3.1.1 dialects + (intentionally excludes security vulnerable SMB1 + dialect). +Auto Negotiation Supported. +Compound Request Supported. +Oplock Cache Mechanism Supported. +SMB2 leases(v1 lease) Supported. +Directory leases(v2 lease) Planned for future. +Multi-credits Supported. +NTLM/NTLMv2 Supported. +HMAC-SHA256 Signing Supported. +Secure negotiate Supported. +Signing Update Supported. +Pre-authentication integrity Supported. +SMB3 encryption(CCM, GCM) Supported. (CCM and GCM128 supported, GCM256 in + progress) +SMB direct(RDMA) Partially Supported. SMB3 Multi-channel is + required to connect to Windows client. +SMB3 Multi-channel Partially Supported. Planned to implement + replay/retry mechanisms for future. +SMB3.1.1 POSIX extension Supported. +ACLs Partially Supported. only DACLs available, SACLs + (auditing) is planned for the future. For + ownership (SIDs) ksmbd generates random subauth + values(then store it to disk) and use uid/gid + get from inode as RID for local domain SID. + The current acl implementation is limited to + standalone server, not a domain member. + Integration with Samba tools is being worked on + to allow future support for running as a domain + member. +Kerberos Supported. +Durable handle v1,v2 Planned for future. +Persistent handle Planned for future. +SMB2 notify Planned for future. +Sparse file support Supported. +DCE/RPC support Partially Supported. a few calls(NetShareEnumAll, + NetServerGetInfo, SAMR, LSARPC) that are needed + for file server handled via netlink interface + from ksmbd.mountd. Additional integration with + Samba tools and libraries via upcall is being + investigated to allow support for additional + DCE/RPC management calls (and future support + for Witness protocol e.g.) +ksmbd/nfsd interoperability Planned for future. The features that ksmbd + support are Leases, Notify, ACLs and Share modes. +============================== ================================================= + + +How to run +========== + +1. Download ksmbd-tools and compile them. + - https://github.com/cifsd-team/ksmbd-tools + +2. Create user/password for SMB share. + + # mkdir /etc/ksmbd/ + # ksmbd.adduser -a <Enter USERNAME for SMB share access> + +3. Create /etc/ksmbd/smb.conf file, add SMB share in smb.conf file + - Refer smb.conf.example and + https://github.com/cifsd-team/ksmbd-tools/blob/master/Documentation/configuration.txt + +4. Insert ksmbd.ko module + + # insmod ksmbd.ko + +5. Start ksmbd user space daemon + # ksmbd.mountd + +6. Access share from Windows or Linux using CIFS + +Shutdown KSMBD +============== + +1. kill user and kernel space daemon + # sudo ksmbd.control -s + +How to turn debug print on +========================== + +Each layer +/sys/class/ksmbd-control/debug + +1. Enable all component prints + # sudo ksmbd.control -d "all" + +2. Enable one of components(smb, auth, vfs, oplock, ipc, conn, rdma) + # sudo ksmbd.control -d "smb" + +3. Show what prints are enable. + # cat/sys/class/ksmbd-control/debug + [smb] auth vfs oplock ipc conn [rdma] + +4. Disable prints: + If you try the selected component once more, It is disabled without brackets. diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst index 246af51b277a..7e1f44c14e6f 100644 --- a/Documentation/filesystems/index.rst +++ b/Documentation/filesystems/index.rst @@ -72,7 +72,7 @@ Documentation for filesystem implementations. befs bfs btrfs - cifs/cifsroot + cifs/index ceph coda configfs diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst index 2183fd8cc350..2a75dd5da7b5 100644 --- a/Documentation/filesystems/locking.rst +++ b/Documentation/filesystems/locking.rst @@ -271,19 +271,19 @@ prototypes:: locking rules: All except set_page_dirty and freepage may block -====================== ======================== ========= -ops PageLocked(page) i_rwsem -====================== ======================== ========= +====================== ======================== ========= =============== +ops PageLocked(page) i_rwsem invalidate_lock +====================== ======================== ========= =============== writepage: yes, unlocks (see below) -readpage: yes, unlocks +readpage: yes, unlocks shared writepages: set_page_dirty no -readahead: yes, unlocks -readpages: no +readahead: yes, unlocks shared +readpages: no shared write_begin: locks the page exclusive write_end: yes, unlocks exclusive bmap: -invalidatepage: yes +invalidatepage: yes exclusive releasepage: yes freepage: yes direct_IO: @@ -295,7 +295,7 @@ is_partially_uptodate: yes error_remove_page: yes swap_activate: no swap_deactivate: no -====================== ======================== ========= +====================== ======================== ========= =============== ->write_begin(), ->write_end() and ->readpage() may be called from the request handler (/dev/loop). @@ -378,7 +378,10 @@ keep it that way and don't breed new callers. ->invalidatepage() is called when the filesystem must attempt to drop some or all of the buffers from the page when it is being truncated. It returns zero on success. If ->invalidatepage is zero, the kernel uses -block_invalidatepage() instead. +block_invalidatepage() instead. The filesystem must exclusively acquire +invalidate_lock before invalidating page cache in truncate / hole punch path +(and thus calling into ->invalidatepage) to block races between page cache +invalidation and page cache filling functions (fault, read, ...). ->releasepage() is called when the kernel is about to try to drop the buffers from the page in preparation for freeing it. It returns zero to @@ -506,6 +509,7 @@ prototypes:: ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); ssize_t (*read_iter) (struct kiocb *, struct iov_iter *); ssize_t (*write_iter) (struct kiocb *, struct iov_iter *); + int (*iopoll) (struct kiocb *kiocb, bool spin); int (*iterate) (struct file *, struct dir_context *); int (*iterate_shared) (struct file *, struct dir_context *); __poll_t (*poll) (struct file *, struct poll_table_struct *); @@ -518,12 +522,6 @@ prototypes:: int (*fsync) (struct file *, loff_t start, loff_t end, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); - ssize_t (*readv) (struct file *, const struct iovec *, unsigned long, - loff_t *); - ssize_t (*writev) (struct file *, const struct iovec *, unsigned long, - loff_t *); - ssize_t (*sendfile) (struct file *, loff_t *, size_t, read_actor_t, - void __user *); ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); unsigned long (*get_unmapped_area)(struct file *, unsigned long, @@ -536,6 +534,14 @@ prototypes:: size_t, unsigned int); int (*setlease)(struct file *, long, struct file_lock **, void **); long (*fallocate)(struct file *, int, loff_t, loff_t); + void (*show_fdinfo)(struct seq_file *m, struct file *f); + unsigned (*mmap_capabilities)(struct file *); + ssize_t (*copy_file_range)(struct file *, loff_t, struct file *, + loff_t, size_t, unsigned int); + loff_t (*remap_file_range)(struct file *file_in, loff_t pos_in, + struct file *file_out, loff_t pos_out, + loff_t len, unsigned int remap_flags); + int (*fadvise)(struct file *, loff_t, loff_t, int); locking rules: All may block. @@ -570,6 +576,25 @@ in sys_read() and friends. the lease within the individual filesystem to record the result of the operation +->fallocate implementation must be really careful to maintain page cache +consistency when punching holes or performing other operations that invalidate +page cache contents. Usually the filesystem needs to call +truncate_inode_pages_range() to invalidate relevant range of the page cache. +However the filesystem usually also needs to update its internal (and on disk) +view of file offset -> disk block mapping. Until this update is finished, the +filesystem needs to block page faults and reads from reloading now-stale page +cache contents from the disk. Since VFS acquires mapping->invalidate_lock in +shared mode when loading pages from disk (filemap_fault(), filemap_read(), +readahead paths), the fallocate implementation must take the invalidate_lock to +prevent reloading. + +->copy_file_range and ->remap_file_range implementations need to serialize +against modifications of file data while the operation is running. For +blocking changes through write(2) and similar operations inode->i_rwsem can be +used. To block changes to file contents via a memory mapping during the +operation, the filesystem must take mapping->invalidate_lock to coordinate +with ->page_mkwrite. + dquot_operations ================ @@ -627,11 +652,11 @@ pfn_mkwrite: yes access: yes ============= ========= =========================== -->fault() is called when a previously not present pte is about -to be faulted in. The filesystem must find and return the page associated -with the passed in "pgoff" in the vm_fault structure. If it is possible that -the page may be truncated and/or invalidated, then the filesystem must lock -the page, then ensure it is not already truncated (the page lock will block +->fault() is called when a previously not present pte is about to be faulted +in. The filesystem must find and return the page associated with the passed in +"pgoff" in the vm_fault structure. If it is possible that the page may be +truncated and/or invalidated, then the filesystem must lock invalidate_lock, +then ensure the page is not already truncated (invalidate_lock will block subsequent truncate), and then return with VM_FAULT_LOCKED, and the page locked. The VM will unlock the page. @@ -644,12 +669,14 @@ page table entry. Pointer to entry associated with the page is passed in "pte" field in vm_fault structure. Pointers to entries for other offsets should be calculated relative to "pte". -->page_mkwrite() is called when a previously read-only pte is -about to become writeable. The filesystem again must ensure that there are -no truncate/invalidate races, and then return with the page locked. If -the page has been truncated, the filesystem should not look up a new page -like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which -will cause the VM to retry the fault. +->page_mkwrite() is called when a previously read-only pte is about to become +writeable. The filesystem again must ensure that there are no +truncate/invalidate races or races with operations such as ->remap_file_range +or ->copy_file_range, and then return with the page locked. Usually +mapping->invalidate_lock is suitable for proper serialization. If the page has +been truncated, the filesystem should not look up a new page like the ->fault() +handler, but simply return with VM_FAULT_NOPAGE, which will cause the VM to +retry the fault. ->pfn_mkwrite() is the same as page_mkwrite but when the pte is VM_PFNMAP or VM_MIXEDMAP with a page-less entry. Expected return is diff --git a/Documentation/filesystems/mandatory-locking.rst b/Documentation/filesystems/mandatory-locking.rst deleted file mode 100644 index 9ce73544a8f0..000000000000 --- a/Documentation/filesystems/mandatory-locking.rst +++ /dev/null @@ -1,188 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -===================================================== -Mandatory File Locking For The Linux Operating System -===================================================== - - Andy Walker <andy@lysaker.kvaerner.no> - - 15 April 1996 - - (Updated September 2007) - -0. Why you should avoid mandatory locking ------------------------------------------ - -The Linux implementation is prey to a number of difficult-to-fix race -conditions which in practice make it not dependable: - - - The write system call checks for a mandatory lock only once - at its start. It is therefore possible for a lock request to - be granted after this check but before the data is modified. - A process may then see file data change even while a mandatory - lock was held. - - Similarly, an exclusive lock may be granted on a file after - the kernel has decided to proceed with a read, but before the - read has actually completed, and the reading process may see - the file data in a state which should not have been visible - to it. - - Similar races make the claimed mutual exclusion between lock - and mmap similarly unreliable. - -1. What is mandatory locking? ------------------------------- - -Mandatory locking is kernel enforced file locking, as opposed to the more usual -cooperative file locking used to guarantee sequential access to files among -processes. File locks are applied using the flock() and fcntl() system calls -(and the lockf() library routine which is a wrapper around fcntl().) It is -normally a process' responsibility to check for locks on a file it wishes to -update, before applying its own lock, updating the file and unlocking it again. -The most commonly used example of this (and in the case of sendmail, the most -troublesome) is access to a user's mailbox. The mail user agent and the mail -transfer agent must guard against updating the mailbox at the same time, and -prevent reading the mailbox while it is being updated. - -In a perfect world all processes would use and honour a cooperative, or -"advisory" locking scheme. However, the world isn't perfect, and there's -a lot of poorly written code out there. - -In trying to address this problem, the designers of System V UNIX came up -with a "mandatory" locking scheme, whereby the operating system kernel would -block attempts by a process to write to a file that another process holds a -"read" -or- "shared" lock on, and block attempts to both read and write to a -file that a process holds a "write " -or- "exclusive" lock on. - -The System V mandatory locking scheme was intended to have as little impact as -possible on existing user code. The scheme is based on marking individual files -as candidates for mandatory locking, and using the existing fcntl()/lockf() -interface for applying locks just as if they were normal, advisory locks. - -.. Note:: - - 1. In saying "file" in the paragraphs above I am actually not telling - the whole truth. System V locking is based on fcntl(). The granularity of - fcntl() is such that it allows the locking of byte ranges in files, in - addition to entire files, so the mandatory locking rules also have byte - level granularity. - - 2. POSIX.1 does not specify any scheme for mandatory locking, despite - borrowing the fcntl() locking scheme from System V. The mandatory locking - scheme is defined by the System V Interface Definition (SVID) Version 3. - -2. Marking a file for mandatory locking ---------------------------------------- - -A file is marked as a candidate for mandatory locking by setting the group-id -bit in its file mode but removing the group-execute bit. This is an otherwise -meaningless combination, and was chosen by the System V implementors so as not -to break existing user programs. - -Note that the group-id bit is usually automatically cleared by the kernel when -a setgid file is written to. This is a security measure. The kernel has been -modified to recognize the special case of a mandatory lock candidate and to -refrain from clearing this bit. Similarly the kernel has been modified not -to run mandatory lock candidates with setgid privileges. - -3. Available implementations ----------------------------- - -I have considered the implementations of mandatory locking available with -SunOS 4.1.x, Solaris 2.x and HP-UX 9.x. - -Generally I have tried to make the most sense out of the behaviour exhibited -by these three reference systems. There are many anomalies. - -All the reference systems reject all calls to open() for a file on which -another process has outstanding mandatory locks. This is in direct -contravention of SVID 3, which states that only calls to open() with the -O_TRUNC flag set should be rejected. The Linux implementation follows the SVID -definition, which is the "Right Thing", since only calls with O_TRUNC can -modify the contents of the file. - -HP-UX even disallows open() with O_TRUNC for a file with advisory locks, not -just mandatory locks. That would appear to contravene POSIX.1. - -mmap() is another interesting case. All the operating systems mentioned -prevent mandatory locks from being applied to an mmap()'ed file, but HP-UX -also disallows advisory locks for such a file. SVID actually specifies the -paranoid HP-UX behaviour. - -In my opinion only MAP_SHARED mappings should be immune from locking, and then -only from mandatory locks - that is what is currently implemented. - -SunOS is so hopeless that it doesn't even honour the O_NONBLOCK flag for -mandatory locks, so reads and writes to locked files always block when they -should return EAGAIN. - -I'm afraid that this is such an esoteric area that the semantics described -below are just as valid as any others, so long as the main points seem to -agree. - -4. Semantics ------------- - -1. Mandatory locks can only be applied via the fcntl()/lockf() locking - interface - in other words the System V/POSIX interface. BSD style - locks using flock() never result in a mandatory lock. - -2. If a process has locked a region of a file with a mandatory read lock, then - other processes are permitted to read from that region. If any of these - processes attempts to write to the region it will block until the lock is - released, unless the process has opened the file with the O_NONBLOCK - flag in which case the system call will return immediately with the error - status EAGAIN. - -3. If a process has locked a region of a file with a mandatory write lock, all - attempts to read or write to that region block until the lock is released, - unless a process has opened the file with the O_NONBLOCK flag in which case - the system call will return immediately with the error status EAGAIN. - -4. Calls to open() with O_TRUNC, or to creat(), on a existing file that has - any mandatory locks owned by other processes will be rejected with the - error status EAGAIN. - -5. Attempts to apply a mandatory lock to a file that is memory mapped and - shared (via mmap() with MAP_SHARED) will be rejected with the error status - EAGAIN. - -6. Attempts to create a shared memory map of a file (via mmap() with MAP_SHARED) - that has any mandatory locks in effect will be rejected with the error status - EAGAIN. - -5. Which system calls are affected? ------------------------------------ - -Those which modify a file's contents, not just the inode. That gives read(), -write(), readv(), writev(), open(), creat(), mmap(), truncate() and -ftruncate(). truncate() and ftruncate() are considered to be "write" actions -for the purposes of mandatory locking. - -The affected region is usually defined as stretching from the current position -for the total number of bytes read or written. For the truncate calls it is -defined as the bytes of a file removed or added (we must also consider bytes -added, as a lock can specify just "the whole file", rather than a specific -range of bytes.) - -Note 3: I may have overlooked some system calls that need mandatory lock -checking in my eagerness to get this code out the door. Please let me know, or -better still fix the system calls yourself and submit a patch to me or Linus. - -6. Warning! ------------ - -Not even root can override a mandatory lock, so runaway processes can wreak -havoc if they lock crucial files. The way around it is to change the file -permissions (remove the setgid bit) before trying to read or write to it. -Of course, that might be a bit tricky if the system is hung :-( - -7. The "mand" mount option --------------------------- -Mandatory locking is disabled on all filesystems by default, and must be -administratively enabled by mounting with "-o mand". That mount option -is only allowed if the mounting task has the CAP_SYS_ADMIN capability. - -Since kernel v4.5, it is possible to disable mandatory locking -altogether by setting CONFIG_MANDATORY_FILE_LOCKING to "n". A kernel -with this disabled will reject attempts to mount filesystems with the -"mand" mount option with the error status EPERM. |