diff options
Diffstat (limited to 'Documentation/hwmon')
| -rw-r--r-- | Documentation/hwmon/aquacomputer_d5next.rst | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst index 14b37851af0c..94dc2d93d180 100644 --- a/Documentation/hwmon/aquacomputer_d5next.rst +++ b/Documentation/hwmon/aquacomputer_d5next.rst @@ -12,6 +12,7 @@ Supported devices: * Aquacomputer Octo fan controller * Aquacomputer Quadro fan controller * Aquacomputer High Flow Next sensor +* Aquacomputer Leakshield leak prevention system * Aquacomputer Aquastream XT watercooling pump * Aquacomputer Aquastream Ultimate watercooling pump * Aquacomputer Poweradjust 3 fan controller @@ -57,6 +58,11 @@ The High Flow Next exposes +5V voltages, water quality, conductivity and flow re A temperature sensor can be connected to it, in which case it provides its reading and an estimation of the dissipated/absorbed power in the liquid cooling loop. +The Leakshield exposes two temperature sensors and coolant pressure (current, min, max and +target readings). It also exposes the estimated reservoir volume and how much of it is +filled with coolant. Pump RPM and flow can be set to enhance on-device calculations, +but this is not yet implemented here. + The Aquastream XT pump exposes temperature readings for the coolant, external sensor and fan IC. It also exposes pump and fan speeds (in RPM), voltages, as well as pump current. @@ -83,6 +89,9 @@ Sysfs entries temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius) temp[1-8]_offset Temperature sensor correction offset (in millidegrees Celsius) fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h) +fan1_min Minimal fan speed (in RPM) +fan1_max Maximal fan speed (in RPM) +fan1_target Target fan speed (in RPM) fan5_pulses Quadro flow sensor pulses power[1-8]_input Pump/fan power (in micro Watts) in[0-7]_input Pump/fan voltage (in milli Volts) |