summaryrefslogtreecommitdiff
path: root/Documentation/locking/hwspinlock.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/locking/hwspinlock.rst')
-rw-r--r--Documentation/locking/hwspinlock.rst485
1 files changed, 485 insertions, 0 deletions
diff --git a/Documentation/locking/hwspinlock.rst b/Documentation/locking/hwspinlock.rst
new file mode 100644
index 000000000000..6f03713b7003
--- /dev/null
+++ b/Documentation/locking/hwspinlock.rst
@@ -0,0 +1,485 @@
+===========================
+Hardware Spinlock Framework
+===========================
+
+Introduction
+============
+
+Hardware spinlock modules provide hardware assistance for synchronization
+and mutual exclusion between heterogeneous processors and those not operating
+under a single, shared operating system.
+
+For example, OMAP4 has dual Cortex-A9, dual Cortex-M3 and a C64x+ DSP,
+each of which is running a different Operating System (the master, A9,
+is usually running Linux and the slave processors, the M3 and the DSP,
+are running some flavor of RTOS).
+
+A generic hwspinlock framework allows platform-independent drivers to use
+the hwspinlock device in order to access data structures that are shared
+between remote processors, that otherwise have no alternative mechanism
+to accomplish synchronization and mutual exclusion operations.
+
+This is necessary, for example, for Inter-processor communications:
+on OMAP4, cpu-intensive multimedia tasks are offloaded by the host to the
+remote M3 and/or C64x+ slave processors (by an IPC subsystem called Syslink).
+
+To achieve fast message-based communications, a minimal kernel support
+is needed to deliver messages arriving from a remote processor to the
+appropriate user process.
+
+This communication is based on simple data structures that is shared between
+the remote processors, and access to it is synchronized using the hwspinlock
+module (remote processor directly places new messages in this shared data
+structure).
+
+A common hwspinlock interface makes it possible to have generic, platform-
+independent, drivers.
+
+User API
+========
+
+::
+
+ struct hwspinlock *hwspin_lock_request(void);
+
+Dynamically assign an hwspinlock and return its address, or NULL
+in case an unused hwspinlock isn't available. Users of this
+API will usually want to communicate the lock's id to the remote core
+before it can be used to achieve synchronization.
+
+Should be called from a process context (might sleep).
+
+::
+
+ struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
+
+Assign a specific hwspinlock id and return its address, or NULL
+if that hwspinlock is already in use. Usually board code will
+be calling this function in order to reserve specific hwspinlock
+ids for predefined purposes.
+
+Should be called from a process context (might sleep).
+
+::
+
+ int of_hwspin_lock_get_id(struct device_node *np, int index);
+
+Retrieve the global lock id for an OF phandle-based specific lock.
+This function provides a means for DT users of a hwspinlock module
+to get the global lock id of a specific hwspinlock, so that it can
+be requested using the normal hwspin_lock_request_specific() API.
+
+The function returns a lock id number on success, -EPROBE_DEFER if
+the hwspinlock device is not yet registered with the core, or other
+error values.
+
+Should be called from a process context (might sleep).
+
+::
+
+ int hwspin_lock_free(struct hwspinlock *hwlock);
+
+Free a previously-assigned hwspinlock; returns 0 on success, or an
+appropriate error code on failure (e.g. -EINVAL if the hwspinlock
+is already free).
+
+Should be called from a process context (might sleep).
+
+::
+
+ int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout);
+
+Lock a previously-assigned hwspinlock with a timeout limit (specified in
+msecs). If the hwspinlock is already taken, the function will busy loop
+waiting for it to be released, but give up when the timeout elapses.
+Upon a successful return from this function, preemption is disabled so
+the caller must not sleep, and is advised to release the hwspinlock as
+soon as possible, in order to minimize remote cores polling on the
+hardware interconnect.
+
+Returns 0 when successful and an appropriate error code otherwise (most
+notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs).
+The function will never sleep.
+
+::
+
+ int hwspin_lock_timeout_irq(struct hwspinlock *hwlock, unsigned int timeout);
+
+Lock a previously-assigned hwspinlock with a timeout limit (specified in
+msecs). If the hwspinlock is already taken, the function will busy loop
+waiting for it to be released, but give up when the timeout elapses.
+Upon a successful return from this function, preemption and the local
+interrupts are disabled, so the caller must not sleep, and is advised to
+release the hwspinlock as soon as possible.
+
+Returns 0 when successful and an appropriate error code otherwise (most
+notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs).
+The function will never sleep.
+
+::
+
+ int hwspin_lock_timeout_irqsave(struct hwspinlock *hwlock, unsigned int to,
+ unsigned long *flags);
+
+Lock a previously-assigned hwspinlock with a timeout limit (specified in
+msecs). If the hwspinlock is already taken, the function will busy loop
+waiting for it to be released, but give up when the timeout elapses.
+Upon a successful return from this function, preemption is disabled,
+local interrupts are disabled and their previous state is saved at the
+given flags placeholder. The caller must not sleep, and is advised to
+release the hwspinlock as soon as possible.
+
+Returns 0 when successful and an appropriate error code otherwise (most
+notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs).
+
+The function will never sleep.
+
+::
+
+ int hwspin_lock_timeout_raw(struct hwspinlock *hwlock, unsigned int timeout);
+
+Lock a previously-assigned hwspinlock with a timeout limit (specified in
+msecs). If the hwspinlock is already taken, the function will busy loop
+waiting for it to be released, but give up when the timeout elapses.
+
+Caution: User must protect the routine of getting hardware lock with mutex
+or spinlock to avoid dead-lock, that will let user can do some time-consuming
+or sleepable operations under the hardware lock.
+
+Returns 0 when successful and an appropriate error code otherwise (most
+notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs).
+
+The function will never sleep.
+
+::
+
+ int hwspin_lock_timeout_in_atomic(struct hwspinlock *hwlock, unsigned int to);
+
+Lock a previously-assigned hwspinlock with a timeout limit (specified in
+msecs). If the hwspinlock is already taken, the function will busy loop
+waiting for it to be released, but give up when the timeout elapses.
+
+This function shall be called only from an atomic context and the timeout
+value shall not exceed a few msecs.
+
+Returns 0 when successful and an appropriate error code otherwise (most
+notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs).
+
+The function will never sleep.
+
+::
+
+ int hwspin_trylock(struct hwspinlock *hwlock);
+
+
+Attempt to lock a previously-assigned hwspinlock, but immediately fail if
+it is already taken.
+
+Upon a successful return from this function, preemption is disabled so
+caller must not sleep, and is advised to release the hwspinlock as soon as
+possible, in order to minimize remote cores polling on the hardware
+interconnect.
+
+Returns 0 on success and an appropriate error code otherwise (most
+notably -EBUSY if the hwspinlock was already taken).
+The function will never sleep.
+
+::
+
+ int hwspin_trylock_irq(struct hwspinlock *hwlock);
+
+
+Attempt to lock a previously-assigned hwspinlock, but immediately fail if
+it is already taken.
+
+Upon a successful return from this function, preemption and the local
+interrupts are disabled so caller must not sleep, and is advised to
+release the hwspinlock as soon as possible.
+
+Returns 0 on success and an appropriate error code otherwise (most
+notably -EBUSY if the hwspinlock was already taken).
+
+The function will never sleep.
+
+::
+
+ int hwspin_trylock_irqsave(struct hwspinlock *hwlock, unsigned long *flags);
+
+Attempt to lock a previously-assigned hwspinlock, but immediately fail if
+it is already taken.
+
+Upon a successful return from this function, preemption is disabled,
+the local interrupts are disabled and their previous state is saved
+at the given flags placeholder. The caller must not sleep, and is advised
+to release the hwspinlock as soon as possible.
+
+Returns 0 on success and an appropriate error code otherwise (most
+notably -EBUSY if the hwspinlock was already taken).
+The function will never sleep.
+
+::
+
+ int hwspin_trylock_raw(struct hwspinlock *hwlock);
+
+Attempt to lock a previously-assigned hwspinlock, but immediately fail if
+it is already taken.
+
+Caution: User must protect the routine of getting hardware lock with mutex
+or spinlock to avoid dead-lock, that will let user can do some time-consuming
+or sleepable operations under the hardware lock.
+
+Returns 0 on success and an appropriate error code otherwise (most
+notably -EBUSY if the hwspinlock was already taken).
+The function will never sleep.
+
+::
+
+ int hwspin_trylock_in_atomic(struct hwspinlock *hwlock);
+
+Attempt to lock a previously-assigned hwspinlock, but immediately fail if
+it is already taken.
+
+This function shall be called only from an atomic context.
+
+Returns 0 on success and an appropriate error code otherwise (most
+notably -EBUSY if the hwspinlock was already taken).
+The function will never sleep.
+
+::
+
+ void hwspin_unlock(struct hwspinlock *hwlock);
+
+Unlock a previously-locked hwspinlock. Always succeed, and can be called
+from any context (the function never sleeps).
+
+.. note::
+
+ code should **never** unlock an hwspinlock which is already unlocked
+ (there is no protection against this).
+
+::
+
+ void hwspin_unlock_irq(struct hwspinlock *hwlock);
+
+Unlock a previously-locked hwspinlock and enable local interrupts.
+The caller should **never** unlock an hwspinlock which is already unlocked.
+
+Doing so is considered a bug (there is no protection against this).
+Upon a successful return from this function, preemption and local
+interrupts are enabled. This function will never sleep.
+
+::
+
+ void
+ hwspin_unlock_irqrestore(struct hwspinlock *hwlock, unsigned long *flags);
+
+Unlock a previously-locked hwspinlock.
+
+The caller should **never** unlock an hwspinlock which is already unlocked.
+Doing so is considered a bug (there is no protection against this).
+Upon a successful return from this function, preemption is reenabled,
+and the state of the local interrupts is restored to the state saved at
+the given flags. This function will never sleep.
+
+::
+
+ void hwspin_unlock_raw(struct hwspinlock *hwlock);
+
+Unlock a previously-locked hwspinlock.
+
+The caller should **never** unlock an hwspinlock which is already unlocked.
+Doing so is considered a bug (there is no protection against this).
+This function will never sleep.
+
+::
+
+ void hwspin_unlock_in_atomic(struct hwspinlock *hwlock);
+
+Unlock a previously-locked hwspinlock.
+
+The caller should **never** unlock an hwspinlock which is already unlocked.
+Doing so is considered a bug (there is no protection against this).
+This function will never sleep.
+
+::
+
+ int hwspin_lock_get_id(struct hwspinlock *hwlock);
+
+Retrieve id number of a given hwspinlock. This is needed when an
+hwspinlock is dynamically assigned: before it can be used to achieve
+mutual exclusion with a remote cpu, the id number should be communicated
+to the remote task with which we want to synchronize.
+
+Returns the hwspinlock id number, or -EINVAL if hwlock is null.
+
+Typical usage
+=============
+
+::
+
+ #include <linux/hwspinlock.h>
+ #include <linux/err.h>
+
+ int hwspinlock_example1(void)
+ {
+ struct hwspinlock *hwlock;
+ int ret;
+
+ /* dynamically assign a hwspinlock */
+ hwlock = hwspin_lock_request();
+ if (!hwlock)
+ ...
+
+ id = hwspin_lock_get_id(hwlock);
+ /* probably need to communicate id to a remote processor now */
+
+ /* take the lock, spin for 1 sec if it's already taken */
+ ret = hwspin_lock_timeout(hwlock, 1000);
+ if (ret)
+ ...
+
+ /*
+ * we took the lock, do our thing now, but do NOT sleep
+ */
+
+ /* release the lock */
+ hwspin_unlock(hwlock);
+
+ /* free the lock */
+ ret = hwspin_lock_free(hwlock);
+ if (ret)
+ ...
+
+ return ret;
+ }
+
+ int hwspinlock_example2(void)
+ {
+ struct hwspinlock *hwlock;
+ int ret;
+
+ /*
+ * assign a specific hwspinlock id - this should be called early
+ * by board init code.
+ */
+ hwlock = hwspin_lock_request_specific(PREDEFINED_LOCK_ID);
+ if (!hwlock)
+ ...
+
+ /* try to take it, but don't spin on it */
+ ret = hwspin_trylock(hwlock);
+ if (!ret) {
+ pr_info("lock is already taken\n");
+ return -EBUSY;
+ }
+
+ /*
+ * we took the lock, do our thing now, but do NOT sleep
+ */
+
+ /* release the lock */
+ hwspin_unlock(hwlock);
+
+ /* free the lock */
+ ret = hwspin_lock_free(hwlock);
+ if (ret)
+ ...
+
+ return ret;
+ }
+
+
+API for implementors
+====================
+
+::
+
+ int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
+ const struct hwspinlock_ops *ops, int base_id, int num_locks);
+
+To be called from the underlying platform-specific implementation, in
+order to register a new hwspinlock device (which is usually a bank of
+numerous locks). Should be called from a process context (this function
+might sleep).
+
+Returns 0 on success, or appropriate error code on failure.
+
+::
+
+ int hwspin_lock_unregister(struct hwspinlock_device *bank);
+
+To be called from the underlying vendor-specific implementation, in order
+to unregister an hwspinlock device (which is usually a bank of numerous
+locks).
+
+Should be called from a process context (this function might sleep).
+
+Returns the address of hwspinlock on success, or NULL on error (e.g.
+if the hwspinlock is still in use).
+
+Important structs
+=================
+
+struct hwspinlock_device is a device which usually contains a bank
+of hardware locks. It is registered by the underlying hwspinlock
+implementation using the hwspin_lock_register() API.
+
+::
+
+ /**
+ * struct hwspinlock_device - a device which usually spans numerous hwspinlocks
+ * @dev: underlying device, will be used to invoke runtime PM api
+ * @ops: platform-specific hwspinlock handlers
+ * @base_id: id index of the first lock in this device
+ * @num_locks: number of locks in this device
+ * @lock: dynamically allocated array of 'struct hwspinlock'
+ */
+ struct hwspinlock_device {
+ struct device *dev;
+ const struct hwspinlock_ops *ops;
+ int base_id;
+ int num_locks;
+ struct hwspinlock lock[0];
+ };
+
+struct hwspinlock_device contains an array of hwspinlock structs, each
+of which represents a single hardware lock::
+
+ /**
+ * struct hwspinlock - this struct represents a single hwspinlock instance
+ * @bank: the hwspinlock_device structure which owns this lock
+ * @lock: initialized and used by hwspinlock core
+ * @priv: private data, owned by the underlying platform-specific hwspinlock drv
+ */
+ struct hwspinlock {
+ struct hwspinlock_device *bank;
+ spinlock_t lock;
+ void *priv;
+ };
+
+When registering a bank of locks, the hwspinlock driver only needs to
+set the priv members of the locks. The rest of the members are set and
+initialized by the hwspinlock core itself.
+
+Implementation callbacks
+========================
+
+There are three possible callbacks defined in 'struct hwspinlock_ops'::
+
+ struct hwspinlock_ops {
+ int (*trylock)(struct hwspinlock *lock);
+ void (*unlock)(struct hwspinlock *lock);
+ void (*relax)(struct hwspinlock *lock);
+ };
+
+The first two callbacks are mandatory:
+
+The ->trylock() callback should make a single attempt to take the lock, and
+return 0 on failure and 1 on success. This callback may **not** sleep.
+
+The ->unlock() callback releases the lock. It always succeed, and it, too,
+may **not** sleep.
+
+The ->relax() callback is optional. It is called by hwspinlock core while
+spinning on a lock, and can be used by the underlying implementation to force
+a delay between two successive invocations of ->trylock(). It may **not** sleep.