summaryrefslogtreecommitdiff
path: root/Documentation/mtd/intel-spi.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/mtd/intel-spi.txt')
-rw-r--r--Documentation/mtd/intel-spi.txt88
1 files changed, 88 insertions, 0 deletions
diff --git a/Documentation/mtd/intel-spi.txt b/Documentation/mtd/intel-spi.txt
new file mode 100644
index 000000000000..bc357729c2cb
--- /dev/null
+++ b/Documentation/mtd/intel-spi.txt
@@ -0,0 +1,88 @@
+Upgrading BIOS using intel-spi
+------------------------------
+
+Many Intel CPUs like Baytrail and Braswell include SPI serial flash host
+controller which is used to hold BIOS and other platform specific data.
+Since contents of the SPI serial flash is crucial for machine to function,
+it is typically protected by different hardware protection mechanisms to
+avoid accidental (or on purpose) overwrite of the content.
+
+Not all manufacturers protect the SPI serial flash, mainly because it
+allows upgrading the BIOS image directly from an OS.
+
+The intel-spi driver makes it possible to read and write the SPI serial
+flash, if certain protection bits are not set and locked. If it finds
+any of them set, the whole MTD device is made read-only to prevent
+partial overwrites. By default the driver exposes SPI serial flash
+contents as read-only but it can be changed from kernel command line,
+passing "intel-spi.writeable=1".
+
+Please keep in mind that overwriting the BIOS image on SPI serial flash
+might render the machine unbootable and requires special equipment like
+Dediprog to revive. You have been warned!
+
+Below are the steps how to upgrade MinnowBoard MAX BIOS directly from
+Linux.
+
+ 1) Download and extract the latest Minnowboard MAX BIOS SPI image
+ [1]. At the time writing this the latest image is v92.
+
+ 2) Install mtd-utils package [2]. We need this in order to erase the SPI
+ serial flash. Distros like Debian and Fedora have this prepackaged with
+ name "mtd-utils".
+
+ 3) Add "intel-spi.writeable=1" to the kernel command line and reboot
+ the board (you can also reload the driver passing "writeable=1" as
+ module parameter to modprobe).
+
+ 4) Once the board is up and running again, find the right MTD partition
+ (it is named as "BIOS"):
+
+ # cat /proc/mtd
+ dev: size erasesize name
+ mtd0: 00800000 00001000 "BIOS"
+
+ So here it will be /dev/mtd0 but it may vary.
+
+ 5) Make backup of the existing image first:
+
+ # dd if=/dev/mtd0ro of=bios.bak
+ 16384+0 records in
+ 16384+0 records out
+ 8388608 bytes (8.4 MB) copied, 10.0269 s, 837 kB/s
+
+ 6) Verify the backup
+
+ # sha1sum /dev/mtd0ro bios.bak
+ fdbb011920572ca6c991377c4b418a0502668b73 /dev/mtd0ro
+ fdbb011920572ca6c991377c4b418a0502668b73 bios.bak
+
+ The SHA1 sums must match. Otherwise do not continue any further!
+
+ 7) Erase the SPI serial flash. After this step, do not reboot the
+ board! Otherwise it will not start anymore.
+
+ # flash_erase /dev/mtd0 0 0
+ Erasing 4 Kibyte @ 7ff000 -- 100 % complete
+
+ 8) Once completed without errors you can write the new BIOS image:
+
+ # dd if=MNW2MAX1.X64.0092.R01.1605221712.bin of=/dev/mtd0
+
+ 9) Verify that the new content of the SPI serial flash matches the new
+ BIOS image:
+
+ # sha1sum /dev/mtd0ro MNW2MAX1.X64.0092.R01.1605221712.bin
+ 9b4df9e4be2057fceec3a5529ec3d950836c87a2 /dev/mtd0ro
+ 9b4df9e4be2057fceec3a5529ec3d950836c87a2 MNW2MAX1.X64.0092.R01.1605221712.bin
+
+ The SHA1 sums should match.
+
+ 10) Now you can reboot your board and observe the new BIOS starting up
+ properly.
+
+References
+----------
+
+[1] https://firmware.intel.com/sites/default/files/MinnowBoard.MAX_.X64.92.R01.zip
+[2] http://www.linux-mtd.infradead.org/