diff options
Diffstat (limited to 'Documentation/netlink/specs/netdev.yaml')
| -rw-r--r-- | Documentation/netlink/specs/netdev.yaml | 354 |
1 files changed, 354 insertions, 0 deletions
diff --git a/Documentation/netlink/specs/netdev.yaml b/Documentation/netlink/specs/netdev.yaml index 3addac970680..c0ef6d0d7786 100644 --- a/Documentation/netlink/specs/netdev.yaml +++ b/Documentation/netlink/specs/netdev.yaml @@ -70,10 +70,18 @@ definitions: name: tx-checksum doc: L3 checksum HW offload is supported by the driver. + - + name: tx-launch-time-fifo + doc: + Launch time HW offload is supported by the driver. - name: queue-type type: enum entries: [ rx, tx ] + - + name: qstats-scope + type: flags + entries: [ queue ] attribute-sets: - @@ -111,6 +119,9 @@ attribute-sets: type: u64 enum: xsk-flags - + name: io-uring-provider-info + attributes: [] + - name: page-pool attributes: - @@ -163,6 +174,15 @@ attribute-sets: "re-attached", they are just waiting to disappear. Attribute is absent if Page Pool has not been detached, and can still be used to allocate new memory. + - + name: dmabuf + doc: ID of the dmabuf this page-pool is attached to. + type: u32 + - + name: io-uring + doc: io-uring memory provider information. + type: nest + nested-attributes: io-uring-provider-info - name: page-pool-info subset-of: page-pool @@ -240,6 +260,29 @@ attribute-sets: threaded mode. If NAPI is not in threaded mode (i.e. uses normal softirq context), the attribute will be absent. type: u32 + - + name: defer-hard-irqs + doc: The number of consecutive empty polls before IRQ deferral ends + and hardware IRQs are re-enabled. + type: u32 + checks: + max: s32-max + - + name: gro-flush-timeout + doc: The timeout, in nanoseconds, of when to trigger the NAPI watchdog + timer which schedules NAPI processing. Additionally, a non-zero + value will also prevent GRO from flushing recent super-frames at + the end of a NAPI cycle. This may add receive latency in exchange + for reducing the number of frames processed by the network stack. + type: uint + - + name: irq-suspend-timeout + doc: The timeout, in nanoseconds, of how long to suspend irq + processing, if event polling finds events + type: uint + - + name: xsk-info + attributes: [] - name: queue attributes: @@ -258,12 +301,252 @@ attribute-sets: - name: type doc: Queue type as rx, tx. Each queue type defines a separate ID space. + XDP TX queues allocated in the kernel are not linked to NAPIs and + thus not listed. AF_XDP queues will have more information set in + the xsk attribute. type: u32 enum: queue-type - name: napi-id doc: ID of the NAPI instance which services this queue. type: u32 + - + name: dmabuf + doc: ID of the dmabuf attached to this queue, if any. + type: u32 + - + name: io-uring + doc: io_uring memory provider information. + type: nest + nested-attributes: io-uring-provider-info + - + name: xsk + doc: XSK information for this queue, if any. + type: nest + nested-attributes: xsk-info + - + name: qstats + doc: | + Get device statistics, scoped to a device or a queue. + These statistics extend (and partially duplicate) statistics available + in struct rtnl_link_stats64. + Value of the `scope` attribute determines how statistics are + aggregated. When aggregated for the entire device the statistics + represent the total number of events since last explicit reset of + the device (i.e. not a reconfiguration like changing queue count). + When reported per-queue, however, the statistics may not add + up to the total number of events, will only be reported for currently + active objects, and will likely report the number of events since last + reconfiguration. + attributes: + - + name: ifindex + doc: ifindex of the netdevice to which stats belong. + type: u32 + checks: + min: 1 + - + name: queue-type + doc: Queue type as rx, tx, for queue-id. + type: u32 + enum: queue-type + - + name: queue-id + doc: Queue ID, if stats are scoped to a single queue instance. + type: u32 + - + name: scope + doc: | + What object type should be used to iterate over the stats. + type: uint + enum: qstats-scope + - + name: rx-packets + doc: | + Number of wire packets successfully received and passed to the stack. + For drivers supporting XDP, XDP is considered the first layer + of the stack, so packets consumed by XDP are still counted here. + type: uint + value: 8 # reserve some attr ids in case we need more metadata later + - + name: rx-bytes + doc: Successfully received bytes, see `rx-packets`. + type: uint + - + name: tx-packets + doc: | + Number of wire packets successfully sent. Packet is considered to be + successfully sent once it is in device memory (usually this means + the device has issued a DMA completion for the packet). + type: uint + - + name: tx-bytes + doc: Successfully sent bytes, see `tx-packets`. + type: uint + - + name: rx-alloc-fail + doc: | + Number of times skb or buffer allocation failed on the Rx datapath. + Allocation failure may, or may not result in a packet drop, depending + on driver implementation and whether system recovers quickly. + type: uint + - + name: rx-hw-drops + doc: | + Number of all packets which entered the device, but never left it, + including but not limited to: packets dropped due to lack of buffer + space, processing errors, explicit or implicit policies and packet + filters. + type: uint + - + name: rx-hw-drop-overruns + doc: | + Number of packets dropped due to transient lack of resources, such as + buffer space, host descriptors etc. + type: uint + - + name: rx-csum-complete + doc: Number of packets that were marked as CHECKSUM_COMPLETE. + type: uint + - + name: rx-csum-unnecessary + doc: Number of packets that were marked as CHECKSUM_UNNECESSARY. + type: uint + - + name: rx-csum-none + doc: Number of packets that were not checksummed by device. + type: uint + - + name: rx-csum-bad + doc: | + Number of packets with bad checksum. The packets are not discarded, + but still delivered to the stack. + type: uint + - + name: rx-hw-gro-packets + doc: | + Number of packets that were coalesced from smaller packets by the device. + Counts only packets coalesced with the HW-GRO netdevice feature, + LRO-coalesced packets are not counted. + type: uint + - + name: rx-hw-gro-bytes + doc: See `rx-hw-gro-packets`. + type: uint + - + name: rx-hw-gro-wire-packets + doc: | + Number of packets that were coalesced to bigger packetss with the HW-GRO + netdevice feature. LRO-coalesced packets are not counted. + type: uint + - + name: rx-hw-gro-wire-bytes + doc: See `rx-hw-gro-wire-packets`. + type: uint + - + name: rx-hw-drop-ratelimits + doc: | + Number of the packets dropped by the device due to the received + packets bitrate exceeding the device rate limit. + type: uint + - + name: tx-hw-drops + doc: | + Number of packets that arrived at the device but never left it, + encompassing packets dropped for reasons such as processing errors, as + well as those affected by explicitly defined policies and packet + filtering criteria. + type: uint + - + name: tx-hw-drop-errors + doc: Number of packets dropped because they were invalid or malformed. + type: uint + - + name: tx-csum-none + doc: | + Number of packets that did not require the device to calculate the + checksum. + type: uint + - + name: tx-needs-csum + doc: | + Number of packets that required the device to calculate the checksum. + This counter includes the number of GSO wire packets for which device + calculated the L4 checksum. + type: uint + - + name: tx-hw-gso-packets + doc: | + Number of packets that necessitated segmentation into smaller packets + by the device. + type: uint + - + name: tx-hw-gso-bytes + doc: See `tx-hw-gso-packets`. + type: uint + - + name: tx-hw-gso-wire-packets + doc: | + Number of wire-sized packets generated by processing + `tx-hw-gso-packets` + type: uint + - + name: tx-hw-gso-wire-bytes + doc: See `tx-hw-gso-wire-packets`. + type: uint + - + name: tx-hw-drop-ratelimits + doc: | + Number of the packets dropped by the device due to the transmit + packets bitrate exceeding the device rate limit. + type: uint + - + name: tx-stop + doc: | + Number of times driver paused accepting new tx packets + from the stack to this queue, because the queue was full. + Note that if BQL is supported and enabled on the device + the networking stack will avoid queuing a lot of data at once. + type: uint + - + name: tx-wake + doc: | + Number of times driver re-started accepting send + requests to this queue from the stack. + type: uint + - + name: queue-id + subset-of: queue + attributes: + - + name: id + - + name: type + - + name: dmabuf + attributes: + - + name: ifindex + doc: netdev ifindex to bind the dmabuf to. + type: u32 + checks: + min: 1 + - + name: queues + doc: receive queues to bind the dmabuf to. + type: nest + nested-attributes: queue-id + multi-attr: true + - + name: fd + doc: dmabuf file descriptor to bind. + type: u32 + - + name: id + doc: id of the dmabuf binding + type: u32 + checks: + min: 1 operations: list: @@ -317,6 +600,8 @@ operations: - inflight - inflight-mem - detach-time + - dmabuf + - io-uring dump: reply: *pp-reply config-cond: page-pool @@ -381,6 +666,9 @@ operations: - type - napi-id - ifindex + - dmabuf + - io-uring + - xsk dump: request: attributes: @@ -400,11 +688,77 @@ operations: - ifindex - irq - pid + - defer-hard-irqs + - gro-flush-timeout + - irq-suspend-timeout dump: request: attributes: - ifindex reply: *napi-get-op + - + name: qstats-get + doc: | + Get / dump fine grained statistics. Which statistics are reported + depends on the device and the driver, and whether the driver stores + software counters per-queue. + attribute-set: qstats + dump: + request: + attributes: + - ifindex + - scope + reply: + attributes: + - ifindex + - queue-type + - queue-id + - rx-packets + - rx-bytes + - tx-packets + - tx-bytes + - + name: bind-rx + doc: Bind dmabuf to netdev + attribute-set: dmabuf + flags: [ admin-perm ] + do: + request: + attributes: + - ifindex + - fd + - queues + reply: + attributes: + - id + - + name: napi-set + doc: Set configurable NAPI instance settings. + attribute-set: napi + flags: [ admin-perm ] + do: + request: + attributes: + - id + - defer-hard-irqs + - gro-flush-timeout + - irq-suspend-timeout + - + name: bind-tx + doc: Bind dmabuf to netdev for TX + attribute-set: dmabuf + do: + request: + attributes: + - ifindex + - fd + reply: + attributes: + - id + +kernel-family: + headers: [ "net/netdev_netlink.h"] + sock-priv: struct netdev_nl_sock mcast-groups: list: |