summaryrefslogtreecommitdiff
path: root/Documentation/networking/phy.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/phy.rst')
-rw-r--r--Documentation/networking/phy.rst18
1 files changed, 18 insertions, 0 deletions
diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
index e0a7c7af6525..1e4735cc0553 100644
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -267,6 +267,24 @@ Some of the interface modes are described below:
duplex, pause or other settings. This is dependent on the MAC and/or
PHY behaviour.
+``PHY_INTERFACE_MODE_10GBASER``
+ This is the IEEE 802.3 Clause 49 defined 10GBASE-R protocol used with
+ various different mediums. Please refer to the IEEE standard for a
+ definition of this.
+
+ Note: 10GBASE-R is just one protocol that can be used with XFI and SFI.
+ XFI and SFI permit multiple protocols over a single SERDES lane, and
+ also defines the electrical characteristics of the signals with a host
+ compliance board plugged into the host XFP/SFP connector. Therefore,
+ XFI and SFI are not PHY interface types in their own right.
+
+``PHY_INTERFACE_MODE_10GKR``
+ This is the IEEE 802.3 Clause 49 defined 10GBASE-R with Clause 73
+ autonegotiation. Please refer to the IEEE standard for further
+ information.
+
+ Note: due to legacy usage, some 10GBASE-R usage incorrectly makes
+ use of this definition.
Pause frames / flow control
===========================