summaryrefslogtreecommitdiff
path: root/Documentation/networking/strparser.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/strparser.txt')
-rw-r--r--Documentation/networking/strparser.txt209
1 files changed, 140 insertions, 69 deletions
diff --git a/Documentation/networking/strparser.txt b/Documentation/networking/strparser.txt
index a0bf573dfa61..13081b3decef 100644
--- a/Documentation/networking/strparser.txt
+++ b/Documentation/networking/strparser.txt
@@ -1,45 +1,107 @@
-Stream Parser
--------------
+Stream Parser (strparser)
+
+Introduction
+============
The stream parser (strparser) is a utility that parses messages of an
-application layer protocol running over a TCP connection. The stream
+application layer protocol running over a data stream. The stream
parser works in conjunction with an upper layer in the kernel to provide
kernel support for application layer messages. For instance, Kernel
Connection Multiplexor (KCM) uses the Stream Parser to parse messages
using a BPF program.
+The strparser works in one of two modes: receive callback or general
+mode.
+
+In receive callback mode, the strparser is called from the data_ready
+callback of a TCP socket. Messages are parsed and delivered as they are
+received on the socket.
+
+In general mode, a sequence of skbs are fed to strparser from an
+outside source. Message are parsed and delivered as the sequence is
+processed. This modes allows strparser to be applied to arbitrary
+streams of data.
+
Interface
----------
+=========
The API includes a context structure, a set of callbacks, utility
-functions, and a data_ready function. The callbacks include
-a parse_msg function that is called to perform parsing (e.g.
-BPF parsing in case of KCM), and a rcv_msg function that is called
-when a full message has been completed.
+functions, and a data_ready function for receive callback mode. The
+callbacks include a parse_msg function that is called to perform
+parsing (e.g. BPF parsing in case of KCM), and a rcv_msg function
+that is called when a full message has been completed.
+
+Functions
+=========
+
+strp_init(struct strparser *strp, struct sock *sk,
+ const struct strp_callbacks *cb)
+
+ Called to initialize a stream parser. strp is a struct of type
+ strparser that is allocated by the upper layer. sk is the TCP
+ socket associated with the stream parser for use with receive
+ callback mode; in general mode this is set to NULL. Callbacks
+ are called by the stream parser (the callbacks are listed below).
+
+void strp_pause(struct strparser *strp)
+
+ Temporarily pause a stream parser. Message parsing is suspended
+ and no new messages are delivered to the upper layer.
+
+void strp_pause(struct strparser *strp)
+
+ Unpause a paused stream parser.
+
+void strp_stop(struct strparser *strp);
+
+ strp_stop is called to completely stop stream parser operations.
+ This is called internally when the stream parser encounters an
+ error, and it is called from the upper layer to stop parsing
+ operations.
+
+void strp_done(struct strparser *strp);
+
+ strp_done is called to release any resources held by the stream
+ parser instance. This must be called after the stream processor
+ has been stopped.
-A stream parser can be instantiated for a TCP connection. This is done
-by:
+int strp_process(struct strparser *strp, struct sk_buff *orig_skb,
+ unsigned int orig_offset, size_t orig_len,
+ size_t max_msg_size, long timeo)
-strp_init(struct strparser *strp, struct sock *csk,
- struct strp_callbacks *cb)
+ strp_process is called in general mode for a stream parser to
+ parse an sk_buff. The number of bytes processed or a negative
+ error number is returned. Note that strp_process does not
+ consume the sk_buff. max_msg_size is maximum size the stream
+ parser will parse. timeo is timeout for completing a message.
-strp is a struct of type strparser that is allocated by the upper layer.
-csk is the TCP socket associated with the stream parser. Callbacks are
-called by the stream parser.
+void strp_data_ready(struct strparser *strp);
+
+ The upper layer calls strp_tcp_data_ready when data is ready on
+ the lower socket for strparser to process. This should be called
+ from a data_ready callback that is set on the socket. Note that
+ maximum messages size is the limit of the receive socket
+ buffer and message timeout is the receive timeout for the socket.
+
+void strp_check_rcv(struct strparser *strp);
+
+ strp_check_rcv is called to check for new messages on the socket.
+ This is normally called at initialization of a stream parser
+ instance or after strp_unpause.
Callbacks
----------
+=========
-There are four callbacks:
+There are six callbacks:
int (*parse_msg)(struct strparser *strp, struct sk_buff *skb);
parse_msg is called to determine the length of the next message
in the stream. The upper layer must implement this function. It
should parse the sk_buff as containing the headers for the
- next application layer messages in the stream.
+ next application layer message in the stream.
- The skb->cb in the input skb is a struct strp_rx_msg. Only
+ The skb->cb in the input skb is a struct strp_msg. Only
the offset field is relevant in parse_msg and gives the offset
where the message starts in the skb.
@@ -50,26 +112,41 @@ int (*parse_msg)(struct strparser *strp, struct sk_buff *skb);
-ESTRPIPE : current message should not be processed by the
kernel, return control of the socket to userspace which
can proceed to read the messages itself
- other < 0 : Error is parsing, give control back to userspace
+ other < 0 : Error in parsing, give control back to userspace
assuming that synchronization is lost and the stream
is unrecoverable (application expected to close TCP socket)
In the case that an error is returned (return value is less than
- zero) the stream parser will set the error on TCP socket and wake
- it up. If parse_msg returned -ESTRPIPE and the stream parser had
- previously read some bytes for the current message, then the error
- set on the attached socket is ENODATA since the stream is
- unrecoverable in that case.
+ zero) and the parser is in receive callback mode, then it will set
+ the error on TCP socket and wake it up. If parse_msg returned
+ -ESTRPIPE and the stream parser had previously read some bytes for
+ the current message, then the error set on the attached socket is
+ ENODATA since the stream is unrecoverable in that case.
+
+void (*lock)(struct strparser *strp)
+
+ The lock callback is called to lock the strp structure when
+ the strparser is performing an asynchronous operation (such as
+ processing a timeout). In receive callback mode the default
+ function is to lock_sock for the associated socket. In general
+ mode the callback must be set appropriately.
+
+void (*unlock)(struct strparser *strp)
+
+ The unlock callback is called to release the lock obtained
+ by the lock callback. In receive callback mode the default
+ function is release_sock for the associated socket. In general
+ mode the callback must be set appropriately.
void (*rcv_msg)(struct strparser *strp, struct sk_buff *skb);
rcv_msg is called when a full message has been received and
is queued. The callee must consume the sk_buff; it can
call strp_pause to prevent any further messages from being
- received in rcv_msg (see strp_pause below). This callback
+ received in rcv_msg (see strp_pause above). This callback
must be set.
- The skb->cb in the input skb is a struct strp_rx_msg. This
+ The skb->cb in the input skb is a struct strp_msg. This
struct contains two fields: offset and full_len. Offset is
where the message starts in the skb, and full_len is the
the length of the message. skb->len - offset may be greater
@@ -78,59 +155,53 @@ void (*rcv_msg)(struct strparser *strp, struct sk_buff *skb);
int (*read_sock_done)(struct strparser *strp, int err);
read_sock_done is called when the stream parser is done reading
- the TCP socket. The stream parser may read multiple messages
- in a loop and this function allows cleanup to occur when existing
- the loop. If the callback is not set (NULL in strp_init) a
- default function is used.
+ the TCP socket in receive callback mode. The stream parser may
+ read multiple messages in a loop and this function allows cleanup
+ to occur when exiting the loop. If the callback is not set (NULL
+ in strp_init) a default function is used.
void (*abort_parser)(struct strparser *strp, int err);
This function is called when stream parser encounters an error
- in parsing. The default function stops the stream parser for the
- TCP socket and sets the error in the socket. The default function
- can be changed by setting the callback to non-NULL in strp_init.
+ in parsing. The default function stops the stream parser and
+ sets the error in the socket if the parser is in receive callback
+ mode. The default function can be changed by setting the callback
+ to non-NULL in strp_init.
-Functions
----------
+Statistics
+==========
-The upper layer calls strp_tcp_data_ready when data is ready on the lower
-socket for strparser to process. This should be called from a data_ready
-callback that is set on the socket.
+Various counters are kept for each stream parser instance. These are in
+the strp_stats structure. strp_aggr_stats is a convenience structure for
+accumulating statistics for multiple stream parser instances.
+save_strp_stats and aggregate_strp_stats are helper functions to save
+and aggregate statistics.
-strp_stop is called to completely stop stream parser operations. This
-is called internally when the stream parser encounters an error, and
-it is called from the upper layer when unattaching a TCP socket.
+Message assembly limits
+=======================
-strp_done is called to unattach the stream parser from the TCP socket.
-This must be called after the stream processor has be stopped.
+The stream parser provide mechanisms to limit the resources consumed by
+message assembly.
-strp_check_rcv is called to check for new messages on the socket. This
-is normally called at initialization of the a stream parser instance
-of after strp_unpause.
+A timer is set when assembly starts for a new message. In receive
+callback mode the message timeout is taken from rcvtime for the
+associated TCP socket. In general mode, the timeout is passed as an
+argument in strp_process. If the timer fires before assembly completes
+the stream parser is aborted and the ETIMEDOUT error is set on the TCP
+socket if in receive callback mode.
-Statistics
-----------
+In receive callback mode, message length is limited to the receive
+buffer size of the associated TCP socket. If the length returned by
+parse_msg is greater than the socket buffer size then the stream parser
+is aborted with EMSGSIZE error set on the TCP socket. Note that this
+makes the maximum size of receive skbuffs for a socket with a stream
+parser to be 2*sk_rcvbuf of the TCP socket.
-Various counters are kept for each stream parser for a TCP socket.
-These are in the strp_stats structure. strp_aggr_stats is a convenience
-structure for accumulating statistics for multiple stream parser
-instances. save_strp_stats and aggregate_strp_stats are helper functions
-to save and aggregate statistics.
+In general mode the message length limit is passed in as an argument
+to strp_process.
-Message assembly limits
------------------------
+Author
+======
-The stream parser provide mechanisms to limit the resources consumed by
-message assembly.
+Tom Herbert (tom@quantonium.net)
-A timer is set when assembly starts for a new message. The message
-timeout is taken from rcvtime for the associated TCP socket. If the
-timer fires before assembly completes the stream parser is aborted
-and the ETIMEDOUT error is set on the TCP socket.
-
-Message length is limited to the receive buffer size of the associated
-TCP socket. If the length returned by parse_msg is greater than
-the socket buffer size then the stream parser is aborted with
-EMSGSIZE error set on the TCP socket. Note that this makes the
-maximum size of receive skbuffs for a socket with a stream parser
-to be 2*sk_rcvbuf of the TCP socket.