summaryrefslogtreecommitdiff
path: root/Documentation/networking/timestamping.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/timestamping.rst')
-rw-r--r--Documentation/networking/timestamping.rst6
1 files changed, 3 insertions, 3 deletions
diff --git a/Documentation/networking/timestamping.rst b/Documentation/networking/timestamping.rst
index 7db3985359bc..a722eb30e014 100644
--- a/Documentation/networking/timestamping.rst
+++ b/Documentation/networking/timestamping.rst
@@ -625,7 +625,7 @@ interfaces of a DSA switch to share the same PHC.
By design, PTP timestamping with a DSA switch does not need any special
handling in the driver for the host port it is attached to. However, when the
host port also supports PTP timestamping, DSA will take care of intercepting
-the ``.ndo_do_ioctl`` calls towards the host port, and block attempts to enable
+the ``.ndo_eth_ioctl`` calls towards the host port, and block attempts to enable
hardware timestamping on it. This is because the SO_TIMESTAMPING API does not
allow the delivery of multiple hardware timestamps for the same packet, so
anybody else except for the DSA switch port must be prevented from doing so.
@@ -688,7 +688,7 @@ ethtool ioctl operations for them need to be mediated by their respective MAC
driver. Therefore, as opposed to DSA switches, modifications need to be done
to each individual MAC driver for PHY timestamping support. This entails:
-- Checking, in ``.ndo_do_ioctl``, whether ``phy_has_hwtstamp(netdev->phydev)``
+- Checking, in ``.ndo_eth_ioctl``, whether ``phy_has_hwtstamp(netdev->phydev)``
is true or not. If it is, then the MAC driver should not process this request
but instead pass it on to the PHY using ``phy_mii_ioctl()``.
@@ -747,7 +747,7 @@ For example, a typical driver design for TX timestamping might be to split the
transmission part into 2 portions:
1. "TX": checks whether PTP timestamping has been previously enabled through
- the ``.ndo_do_ioctl`` ("``priv->hwtstamp_tx_enabled == true``") and the
+ the ``.ndo_eth_ioctl`` ("``priv->hwtstamp_tx_enabled == true``") and the
current skb requires a TX timestamp ("``skb_shinfo(skb)->tx_flags &
SKBTX_HW_TSTAMP``"). If this is true, it sets the
"``skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS``" flag. Note: as