summaryrefslogtreecommitdiff
path: root/Documentation/networking
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking')
-rw-r--r--Documentation/networking/igb.txt48
1 files changed, 0 insertions, 48 deletions
diff --git a/Documentation/networking/igb.txt b/Documentation/networking/igb.txt
index 4ebbd659256f..43d3549366a0 100644
--- a/Documentation/networking/igb.txt
+++ b/Documentation/networking/igb.txt
@@ -36,54 +36,6 @@ Default Value: 0
This parameter adds support for SR-IOV. It causes the driver to spawn up to
max_vfs worth of virtual function.
-QueuePairs
-----------
-Valid Range: 0-1
-Default Value: 1 (TX and RX will be paired onto one interrupt vector)
-
-If set to 0, when MSI-X is enabled, the TX and RX will attempt to occupy
-separate vectors.
-
-This option can be overridden to 1 if there are not sufficient interrupts
-available. This can occur if any combination of RSS, VMDQ, and max_vfs
-results in more than 4 queues being used.
-
-Node
-----
-Valid Range: 0-n
-Default Value: -1 (off)
-
- 0 - n: where n is the number of the NUMA node that should be used to
- allocate memory for this adapter port.
- -1: uses the driver default of allocating memory on whichever processor is
- running insmod/modprobe.
-
- The Node parameter will allow you to pick which NUMA node you want to have
- the adapter allocate memory from. All driver structures, in-memory queues,
- and receive buffers will be allocated on the node specified. This parameter
- is only useful when interrupt affinity is specified, otherwise some portion
- of the time the interrupt could run on a different core than the memory is
- allocated on, causing slower memory access and impacting throughput, CPU, or
- both.
-
-EEE
----
-Valid Range: 0-1
-Default Value: 1 (enabled)
-
- A link between two EEE-compliant devices will result in periodic bursts of
- data followed by long periods where in the link is in an idle state. This Low
- Power Idle (LPI) state is supported in both 1Gbps and 100Mbps link speeds.
- NOTE: EEE support requires autonegotiation.
-
-DMAC
-----
-Valid Range: 0-1
-Default Value: 1 (enabled)
- Enables or disables DMA Coalescing feature.
-
-
-
Additional Configurations
=========================