summaryrefslogtreecommitdiff
path: root/Documentation/scsi/aic7xxx.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/scsi/aic7xxx.txt')
-rw-r--r--Documentation/scsi/aic7xxx.txt394
1 files changed, 0 insertions, 394 deletions
diff --git a/Documentation/scsi/aic7xxx.txt b/Documentation/scsi/aic7xxx.txt
deleted file mode 100644
index 7c5d0223d444..000000000000
--- a/Documentation/scsi/aic7xxx.txt
+++ /dev/null
@@ -1,394 +0,0 @@
-====================================================================
-= Adaptec Aic7xxx Fast -> Ultra160 Family Manager Set v7.0 =
-= README for =
-= The Linux Operating System =
-====================================================================
-
-The following information is available in this file:
-
- 1. Supported Hardware
- 2. Version History
- 3. Command Line Options
- 4. Contacting Adaptec
-
-1. Supported Hardware
-
- The following Adaptec SCSI Chips and Host Adapters are supported by
- the aic7xxx driver.
-
- Chip MIPS Host Bus MaxSync MaxWidth SCBs Notes
- ---------------------------------------------------------------
- aic7770 10 EISA/VL 10MHz 16Bit 4 1
- aic7850 10 PCI/32 10MHz 8Bit 3
- aic7855 10 PCI/32 10MHz 8Bit 3
- aic7856 10 PCI/32 10MHz 8Bit 3
- aic7859 10 PCI/32 20MHz 8Bit 3
- aic7860 10 PCI/32 20MHz 8Bit 3
- aic7870 10 PCI/32 10MHz 16Bit 16
- aic7880 10 PCI/32 20MHz 16Bit 16
- aic7890 20 PCI/32 40MHz 16Bit 16 3 4 5 6 7 8
- aic7891 20 PCI/64 40MHz 16Bit 16 3 4 5 6 7 8
- aic7892 20 PCI/64-66 80MHz 16Bit 16 3 4 5 6 7 8
- aic7895 15 PCI/32 20MHz 16Bit 16 2 3 4 5
- aic7895C 15 PCI/32 20MHz 16Bit 16 2 3 4 5 8
- aic7896 20 PCI/32 40MHz 16Bit 16 2 3 4 5 6 7 8
- aic7897 20 PCI/64 40MHz 16Bit 16 2 3 4 5 6 7 8
- aic7899 20 PCI/64-66 80MHz 16Bit 16 2 3 4 5 6 7 8
-
- 1. Multiplexed Twin Channel Device - One controller servicing two
- busses.
- 2. Multi-function Twin Channel Device - Two controllers on one chip.
- 3. Command Channel Secondary DMA Engine - Allows scatter gather list
- and SCB prefetch.
- 4. 64 Byte SCB Support - Allows disconnected, untagged request table
- for all possible target/lun combinations.
- 5. Block Move Instruction Support - Doubles the speed of certain
- sequencer operations.
- 6. `Bayonet' style Scatter Gather Engine - Improves S/G prefetch
- performance.
- 7. Queuing Registers - Allows queuing of new transactions without
- pausing the sequencer.
- 8. Multiple Target IDs - Allows the controller to respond to selection
- as a target on multiple SCSI IDs.
-
- Controller Chip Host-Bus Int-Connectors Ext-Connectors Notes
- --------------------------------------------------------------------------
- AHA-274X[A] aic7770 EISA SE-50M SE-HD50F
- AHA-274X[A]W aic7770 EISA SE-HD68F SE-HD68F
- SE-50M
- AHA-274X[A]T aic7770 EISA 2 X SE-50M SE-HD50F
- AHA-2842 aic7770 VL SE-50M SE-HD50F
- AHA-2940AU aic7860 PCI/32 SE-50M SE-HD50F
- AVA-2902I aic7860 PCI/32 SE-50M
- AVA-2902E aic7860 PCI/32 SE-50M
- AVA-2906 aic7856 PCI/32 SE-50M SE-DB25F
- APC-7850 aic7850 PCI/32 SE-50M 1
- AVA-2940 aic7860 PCI/32 SE-50M
- AHA-2920B aic7860 PCI/32 SE-50M
- AHA-2930B aic7860 PCI/32 SE-50M
- AHA-2920C aic7856 PCI/32 SE-50M SE-HD50F
- AHA-2930C aic7860 PCI/32 SE-50M
- AHA-2930C aic7860 PCI/32 SE-50M
- AHA-2910C aic7860 PCI/32 SE-50M
- AHA-2915C aic7860 PCI/32 SE-50M
- AHA-2940AU/CN aic7860 PCI/32 SE-50M SE-HD50F
- AHA-2944W aic7870 PCI/32 HVD-HD68F HVD-HD68F
- HVD-50M
- AHA-3940W aic7870 PCI/32 2 X SE-HD68F SE-HD68F 2
- AHA-2940UW aic7880 PCI/32 SE-HD68F
- SE-50M SE-HD68F
- AHA-2940U aic7880 PCI/32 SE-50M SE-HD50F
- AHA-2940D aic7880 PCI/32
- aHA-2940 A/T aic7880 PCI/32
- AHA-2940D A/T aic7880 PCI/32
- AHA-3940UW aic7880 PCI/32 2 X SE-HD68F SE-HD68F 3
- AHA-3940UWD aic7880 PCI/32 2 X SE-HD68F 2 X SE-VHD68F 3
- AHA-3940U aic7880 PCI/32 2 X SE-50M SE-HD50F 3
- AHA-2944UW aic7880 PCI/32 HVD-HD68F HVD-HD68F
- HVD-50M
- AHA-3944UWD aic7880 PCI/32 2 X HVD-HD68F 2 X HVD-VHD68F 3
- AHA-4944UW aic7880 PCI/32
- AHA-2930UW aic7880 PCI/32
- AHA-2940UW Pro aic7880 PCI/32 SE-HD68F SE-HD68F 4
- SE-50M
- AHA-2940UW/CN aic7880 PCI/32
- AHA-2940UDual aic7895 PCI/32
- AHA-2940UWDual aic7895 PCI/32
- AHA-3940UWD aic7895 PCI/32
- AHA-3940AUW aic7895 PCI/32
- AHA-3940AUWD aic7895 PCI/32
- AHA-3940AU aic7895 PCI/32
- AHA-3944AUWD aic7895 PCI/32 2 X HVD-HD68F 2 X HVD-VHD68F
- AHA-2940U2B aic7890 PCI/32 LVD-HD68F LVD-HD68F
- AHA-2940U2 OEM aic7891 PCI/64
- AHA-2940U2W aic7890 PCI/32 LVD-HD68F LVD-HD68F
- SE-HD68F
- SE-50M
- AHA-2950U2B aic7891 PCI/64 LVD-HD68F LVD-HD68F
- AHA-2930U2 aic7890 PCI/32 LVD-HD68F SE-HD50F
- SE-50M
- AHA-3950U2B aic7897 PCI/64
- AHA-3950U2D aic7897 PCI/64
- AHA-29160 aic7892 PCI/64-66
- AHA-29160 CPQ aic7892 PCI/64-66
- AHA-29160N aic7892 PCI/32 LVD-HD68F SE-HD50F
- SE-50M
- AHA-29160LP aic7892 PCI/64-66
- AHA-19160 aic7892 PCI/64-66
- AHA-29150LP aic7892 PCI/64-66
- AHA-29130LP aic7892 PCI/64-66
- AHA-3960D aic7899 PCI/64-66 2 X LVD-HD68F 2 X LVD-VHD68F
- LVD-50M
- AHA-3960D CPQ aic7899 PCI/64-66 2 X LVD-HD68F 2 X LVD-VHD68F
- LVD-50M
- AHA-39160 aic7899 PCI/64-66 2 X LVD-HD68F 2 X LVD-VHD68F
- LVD-50M
-
- 1. No BIOS support
- 2. DEC21050 PCI-PCI bridge with multiple controller chips on secondary bus
- 3. DEC2115X PCI-PCI bridge with multiple controller chips on secondary bus
- 4. All three SCSI connectors may be used simultaneously without
- SCSI "stub" effects.
-
-2. Version History
- 7.0 (4th August, 2005)
- - Updated driver to use SCSI transport class infrastructure
- - Upported sequencer and core fixes from last adaptec released
- version of the driver.
- 6.2.36 (June 3rd, 2003)
- - Correct code that disables PCI parity error checking.
- - Correct and simplify handling of the ignore wide residue
- message. The previous code would fail to report a residual
- if the transaction data length was even and we received
- an IWR message.
- - Add support for the 2.5.X EISA framework.
- - Update for change in 2.5.X SCSI proc FS interface.
- - Correct Domain Validation command-line option parsing.
- - When negotiation async via an 8bit WDTR message, send
- an SDTR with an offset of 0 to be sure the target
- knows we are async. This works around a firmware defect
- in the Quantum Atlas 10K.
- - Clear PCI error state during driver attach so that we
- don't disable memory mapped I/O due to a stray write
- by some other driver probe that occurred before we
- claimed the controller.
-
- 6.2.35 (May 14th, 2003)
- - Fix a few GCC 3.3 compiler warnings.
- - Correct operation on EISA Twin Channel controller.
- - Add support for 2.5.X's scsi_report_device_reset().
-
- 6.2.34 (May 5th, 2003)
- - Fix locking regression introduced in 6.2.29 that
- could cause a lock order reversal between the io_request_lock
- and our per-softc lock. This was only possible on RH9,
- SuSE, and kernel.org 2.4.X kernels.
-
- 6.2.33 (April 30th, 2003)
- - Dynamically disable PCI parity error reporting after
- 10 errors are reported to the user. These errors are
- the result of some other device issuing PCI transactions
- with bad parity. Once the user has been informed of the
- problem, continuing to report the errors just degrades
- our performance.
-
- 6.2.32 (March 28th, 2003)
- - Dynamically sized S/G lists to avoid SCSI malloc
- pool fragmentation and SCSI mid-layer deadlock.
-
- 6.2.28 (January 20th, 2003)
- - Domain Validation Fixes
- - Add ability to disable PCI parity error checking.
- - Enhanced Memory Mapped I/O probe
-
- 6.2.20 (November 7th, 2002)
- - Added Domain Validation.
-
-3. Command Line Options
-
- WARNING: ALTERING OR ADDING THESE DRIVER PARAMETERS
- INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE.
- USE THEM WITH CAUTION.
-
- Put a .conf file in the /etc/modprobe.d directory and add/edit a
- line containing 'options aic7xxx aic7xxx=[command[,command...]]' where
- 'command' is one or more of the following:
- -----------------------------------------------------------------
- Option: verbose
- Definition: enable additional informative messages during
- driver operation.
- Possible Values: This option is a flag
- Default Value: disabled
- -----------------------------------------------------------------
- Option: debug:[value]
- Definition: Enables various levels of debugging information
- Possible Values: 0x0000 = no debugging, 0xffff = full debugging
- Default Value: 0x0000
- -----------------------------------------------------------------
- Option: no_probe
- Option: probe_eisa_vl
- Definition: Do not probe for EISA/VLB controllers.
- This is a toggle. If the driver is compiled
- to not probe EISA/VLB controllers by default,
- specifying "no_probe" will enable this probing.
- If the driver is compiled to probe EISA/VLB
- controllers by default, specifying "no_probe"
- will disable this probing.
- Possible Values: This option is a toggle
- Default Value: EISA/VLB probing is disabled by default.
- -----------------------------------------------------------------
- Option: pci_parity
- Definition: Toggles the detection of PCI parity errors.
- On many motherboards with VIA chipsets,
- PCI parity is not generated correctly on the
- PCI bus. It is impossible for the hardware to
- differentiate between these "spurious" parity
- errors and real parity errors. The symptom of
- this problem is a stream of the message:
- "scsi0: Data Parity Error Detected during address or write data phase"
- output by the driver.
- Possible Values: This option is a toggle
- Default Value: PCI Parity Error reporting is disabled
- -----------------------------------------------------------------
- Option: no_reset
- Definition: Do not reset the bus during the initial probe
- phase
- Possible Values: This option is a flag
- Default Value: disabled
- -----------------------------------------------------------------
- Option: extended
- Definition: Force extended translation on the controller
- Possible Values: This option is a flag
- Default Value: disabled
- -----------------------------------------------------------------
- Option: periodic_otag
- Definition: Send an ordered tag periodically to prevent
- tag starvation. Needed for some older devices
- Possible Values: This option is a flag
- Default Value: disabled
- -----------------------------------------------------------------
- Option: reverse_scan
- Definition: Probe the scsi bus in reverse order, starting
- with target 15
- Possible Values: This option is a flag
- Default Value: disabled
- -----------------------------------------------------------------
- Option: global_tag_depth:[value]
- Definition: Global tag depth for all targets on all busses.
- This option sets the default tag depth which
- may be selectively overridden vi the tag_info
- option.
- Possible Values: 1 - 253
- Default Value: 32
- -----------------------------------------------------------------
- Option: tag_info:{{value[,value...]}[,{value[,value...]}...]}
- Definition: Set the per-target tagged queue depth on a
- per controller basis. Both controllers and targets
- may be omitted indicating that they should retain
- the default tag depth.
- Examples: tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32}
- On Controller 0
- specifies a tag depth of 16 for target 0
- specifies a tag depth of 64 for target 3
- specifies a tag depth of 8 for targets 4 and 5
- leaves target 6 at the default
- specifies a tag depth of 32 for targets 1,2,7-15
- All other targets retain the default depth.
-
- tag_info:{{},{32,,32}}
- On Controller 1
- specifies a tag depth of 32 for targets 0 and 2
- All other targets retain the default depth.
-
- Possible Values: 1 - 253
- Default Value: 32
- -----------------------------------------------------------------
- Option: seltime:[value]
- Definition: Specifies the selection timeout value
- Possible Values: 0 = 256ms, 1 = 128ms, 2 = 64ms, 3 = 32ms
- Default Value: 0
- -----------------------------------------------------------------
- Option: dv: {value[,value...]}
- Definition: Set Domain Validation Policy on a per-controller basis.
- Controllers may be omitted indicating that
- they should retain the default read streaming setting.
- Example: dv:{-1,0,,1,1,0}
- On Controller 0 leave DV at its default setting.
- On Controller 1 disable DV.
- Skip configuration on Controller 2.
- On Controllers 3 and 4 enable DV.
- On Controller 5 disable DV.
-
- Possible Values: < 0 Use setting from serial EEPROM.
- 0 Disable DV
- > 0 Enable DV
-
- Default Value: SCSI-Select setting on controllers with a SCSI Select
- option for DV. Otherwise, on for controllers supporting
- U160 speeds and off for all other controller types.
- -----------------------------------------------------------------
-
- Example:
- 'options aic7xxx aic7xxx=verbose,no_probe,tag_info:{{},{,,10}},seltime:1'
- enables verbose logging, Disable EISA/VLB probing,
- and set tag depth on Controller 1/Target 2 to 10 tags.
-
-4. Adaptec Customer Support
-
- A Technical Support Identification (TSID) Number is required for
- Adaptec technical support.
- - The 12-digit TSID can be found on the white barcode-type label
- included inside the box with your product. The TSID helps us
- provide more efficient service by accurately identifying your
- product and support status.
-
- Support Options
- - Search the Adaptec Support Knowledgebase (ASK) at
- http://ask.adaptec.com for articles, troubleshooting tips, and
- frequently asked questions about your product.
- - For support via Email, submit your question to Adaptec's
- Technical Support Specialists at http://ask.adaptec.com/.
-
- North America
- - Visit our Web site at http://www.adaptec.com/.
- - For information about Adaptec's support options, call
- 408-957-2550, 24 hours a day, 7 days a week.
- - To speak with a Technical Support Specialist,
- * For hardware products, call 408-934-7274,
- Monday to Friday, 3:00 am to 5:00 pm, PDT.
- * For RAID and Fibre Channel products, call 321-207-2000,
- Monday to Friday, 3:00 am to 5:00 pm, PDT.
- To expedite your service, have your computer with you.
- - To order Adaptec products, including accessories and cables,
- call 408-957-7274. To order cables online go to
- http://www.adaptec.com/buy-cables/.
-
- Europe
- - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
- - To speak with a Technical Support Specialist, call, or email,
- * German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
- http://ask-de.adaptec.com/.
- * French: +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
- http://ask-fr.adaptec.com/.
- * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
- http://ask.adaptec.com/.
- - You can order Adaptec cables online at
- http://www.adaptec.com/buy-cables/.
-
- Japan
- - Visit our web site at http://www.adaptec.co.jp/.
- - To speak with a Technical Support Specialist, call
- +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
- 1:00 p.m. to 6:00 p.m.
-
--------------------------------------------------------------------
-/*
- * Copyright (c) 2003 Adaptec Inc. 691 S. Milpitas Blvd., Milpitas CA 95035 USA.
- * All rights reserved.
- *
- * You are permitted to redistribute, use and modify this README file in whole
- * or in part in conjunction with redistribution of software governed by the
- * General Public License, provided that the following conditions are met:
- * 1. Redistributions of README file must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- * 3. Modifications or new contributions must be attributed in a copyright
- * notice identifying the author ("Contributor") and added below the
- * original copyright notice. The copyright notice is for purposes of
- * identifying contributors and should not be deemed as permission to alter
- * the permissions given by Adaptec.
- *
- * THIS README FILE IS PROVIDED BY ADAPTEC AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY
- * WARRANTIES OF NON-INFRINGEMENT OR THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
- * ADAPTEC OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS README
- * FILE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */