summaryrefslogtreecommitdiff
path: root/Documentation/scsi/arcmsr_spec.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/scsi/arcmsr_spec.txt')
-rw-r--r--Documentation/scsi/arcmsr_spec.txt574
1 files changed, 0 insertions, 574 deletions
diff --git a/Documentation/scsi/arcmsr_spec.txt b/Documentation/scsi/arcmsr_spec.txt
deleted file mode 100644
index 45d9482c1517..000000000000
--- a/Documentation/scsi/arcmsr_spec.txt
+++ /dev/null
@@ -1,574 +0,0 @@
-*******************************************************************************
-** ARECA FIRMWARE SPEC
-*******************************************************************************
-** Usage of IOP331 adapter
-** (All In/Out is in IOP331's view)
-** 1. Message 0 --> InitThread message and return code
-** 2. Doorbell is used for RS-232 emulation
-** inDoorBell : bit0 -- data in ready
-** (DRIVER DATA WRITE OK)
-** bit1 -- data out has been read
-** (DRIVER DATA READ OK)
-** outDooeBell: bit0 -- data out ready
-** (IOP331 DATA WRITE OK)
-** bit1 -- data in has been read
-** (IOP331 DATA READ OK)
-** 3. Index Memory Usage
-** offset 0xf00 : for RS232 out (request buffer)
-** offset 0xe00 : for RS232 in (scratch buffer)
-** offset 0xa00 : for inbound message code message_rwbuffer
-** (driver send to IOP331)
-** offset 0xa00 : for outbound message code message_rwbuffer
-** (IOP331 send to driver)
-** 4. RS-232 emulation
-** Currently 128 byte buffer is used
-** 1st uint32_t : Data length (1--124)
-** Byte 4--127 : Max 124 bytes of data
-** 5. PostQ
-** All SCSI Command must be sent through postQ:
-** (inbound queue port) Request frame must be 32 bytes aligned
-** #bit27--bit31 => flag for post ccb
-** #bit0--bit26 => real address (bit27--bit31) of post arcmsr_cdb
-** bit31 :
-** 0 : 256 bytes frame
-** 1 : 512 bytes frame
-** bit30 :
-** 0 : normal request
-** 1 : BIOS request
-** bit29 : reserved
-** bit28 : reserved
-** bit27 : reserved
-** ---------------------------------------------------------------------------
-** (outbount queue port) Request reply
-** #bit27--bit31
-** => flag for reply
-** #bit0--bit26
-** => real address (bit27--bit31) of reply arcmsr_cdb
-** bit31 : must be 0 (for this type of reply)
-** bit30 : reserved for BIOS handshake
-** bit29 : reserved
-** bit28 :
-** 0 : no error, ignore AdapStatus/DevStatus/SenseData
-** 1 : Error, error code in AdapStatus/DevStatus/SenseData
-** bit27 : reserved
-** 6. BIOS request
-** All BIOS request is the same with request from PostQ
-** Except :
-** Request frame is sent from configuration space
-** offset: 0x78 : Request Frame (bit30 == 1)
-** offset: 0x18 : writeonly to generate
-** IRQ to IOP331
-** Completion of request:
-** (bit30 == 0, bit28==err flag)
-** 7. Definition of SGL entry (structure)
-** 8. Message1 Out - Diag Status Code (????)
-** 9. Message0 message code :
-** 0x00 : NOP
-** 0x01 : Get Config
-** ->offset 0xa00 :for outbound message code message_rwbuffer
-** (IOP331 send to driver)
-** Signature 0x87974060(4)
-** Request len 0x00000200(4)
-** numbers of queue 0x00000100(4)
-** SDRAM Size 0x00000100(4)-->256 MB
-** IDE Channels 0x00000008(4)
-** vendor 40 bytes char
-** model 8 bytes char
-** FirmVer 16 bytes char
-** Device Map 16 bytes char
-** FirmwareVersion DWORD <== Added for checking of
-** new firmware capability
-** 0x02 : Set Config
-** ->offset 0xa00 :for inbound message code message_rwbuffer
-** (driver send to IOP331)
-** Signature 0x87974063(4)
-** UPPER32 of Request Frame (4)-->Driver Only
-** 0x03 : Reset (Abort all queued Command)
-** 0x04 : Stop Background Activity
-** 0x05 : Flush Cache
-** 0x06 : Start Background Activity
-** (re-start if background is halted)
-** 0x07 : Check If Host Command Pending
-** (Novell May Need This Function)
-** 0x08 : Set controller time
-** ->offset 0xa00 : for inbound message code message_rwbuffer
-** (driver to IOP331)
-** byte 0 : 0xaa <-- signature
-** byte 1 : 0x55 <-- signature
-** byte 2 : year (04)
-** byte 3 : month (1..12)
-** byte 4 : date (1..31)
-** byte 5 : hour (0..23)
-** byte 6 : minute (0..59)
-** byte 7 : second (0..59)
-*******************************************************************************
-*******************************************************************************
-** RS-232 Interface for Areca Raid Controller
-** The low level command interface is exclusive with VT100 terminal
-** --------------------------------------------------------------------
-** 1. Sequence of command execution
-** --------------------------------------------------------------------
-** (A) Header : 3 bytes sequence (0x5E, 0x01, 0x61)
-** (B) Command block : variable length of data including length,
-** command code, data and checksum byte
-** (C) Return data : variable length of data
-** --------------------------------------------------------------------
-** 2. Command block
-** --------------------------------------------------------------------
-** (A) 1st byte : command block length (low byte)
-** (B) 2nd byte : command block length (high byte)
-** note ..command block length shouldn't > 2040 bytes,
-** length excludes these two bytes
-** (C) 3rd byte : command code
-** (D) 4th and following bytes : variable length data bytes
-** depends on command code
-** (E) last byte : checksum byte (sum of 1st byte until last data byte)
-** --------------------------------------------------------------------
-** 3. Command code and associated data
-** --------------------------------------------------------------------
-** The following are command code defined in raid controller Command
-** code 0x10--0x1? are used for system level management,
-** no password checking is needed and should be implemented in separate
-** well controlled utility and not for end user access.
-** Command code 0x20--0x?? always check the password,
-** password must be entered to enable these command.
-** enum
-** {
-** GUI_SET_SERIAL=0x10,
-** GUI_SET_VENDOR,
-** GUI_SET_MODEL,
-** GUI_IDENTIFY,
-** GUI_CHECK_PASSWORD,
-** GUI_LOGOUT,
-** GUI_HTTP,
-** GUI_SET_ETHERNET_ADDR,
-** GUI_SET_LOGO,
-** GUI_POLL_EVENT,
-** GUI_GET_EVENT,
-** GUI_GET_HW_MONITOR,
-** // GUI_QUICK_CREATE=0x20, (function removed)
-** GUI_GET_INFO_R=0x20,
-** GUI_GET_INFO_V,
-** GUI_GET_INFO_P,
-** GUI_GET_INFO_S,
-** GUI_CLEAR_EVENT,
-** GUI_MUTE_BEEPER=0x30,
-** GUI_BEEPER_SETTING,
-** GUI_SET_PASSWORD,
-** GUI_HOST_INTERFACE_MODE,
-** GUI_REBUILD_PRIORITY,
-** GUI_MAX_ATA_MODE,
-** GUI_RESET_CONTROLLER,
-** GUI_COM_PORT_SETTING,
-** GUI_NO_OPERATION,
-** GUI_DHCP_IP,
-** GUI_CREATE_PASS_THROUGH=0x40,
-** GUI_MODIFY_PASS_THROUGH,
-** GUI_DELETE_PASS_THROUGH,
-** GUI_IDENTIFY_DEVICE,
-** GUI_CREATE_RAIDSET=0x50,
-** GUI_DELETE_RAIDSET,
-** GUI_EXPAND_RAIDSET,
-** GUI_ACTIVATE_RAIDSET,
-** GUI_CREATE_HOT_SPARE,
-** GUI_DELETE_HOT_SPARE,
-** GUI_CREATE_VOLUME=0x60,
-** GUI_MODIFY_VOLUME,
-** GUI_DELETE_VOLUME,
-** GUI_START_CHECK_VOLUME,
-** GUI_STOP_CHECK_VOLUME
-** };
-** Command description :
-** GUI_SET_SERIAL : Set the controller serial#
-** byte 0,1 : length
-** byte 2 : command code 0x10
-** byte 3 : password length (should be 0x0f)
-** byte 4-0x13 : should be "ArEcATecHnoLogY"
-** byte 0x14--0x23 : Serial number string (must be 16 bytes)
-** GUI_SET_VENDOR : Set vendor string for the controller
-** byte 0,1 : length
-** byte 2 : command code 0x11
-** byte 3 : password length (should be 0x08)
-** byte 4-0x13 : should be "ArEcAvAr"
-** byte 0x14--0x3B : vendor string (must be 40 bytes)
-** GUI_SET_MODEL : Set the model name of the controller
-** byte 0,1 : length
-** byte 2 : command code 0x12
-** byte 3 : password length (should be 0x08)
-** byte 4-0x13 : should be "ArEcAvAr"
-** byte 0x14--0x1B : model string (must be 8 bytes)
-** GUI_IDENTIFY : Identify device
-** byte 0,1 : length
-** byte 2 : command code 0x13
-** return "Areca RAID Subsystem "
-** GUI_CHECK_PASSWORD : Verify password
-** byte 0,1 : length
-** byte 2 : command code 0x14
-** byte 3 : password length
-** byte 4-0x?? : user password to be checked
-** GUI_LOGOUT : Logout GUI (force password checking on next command)
-** byte 0,1 : length
-** byte 2 : command code 0x15
-** GUI_HTTP : HTTP interface (reserved for Http proxy service)(0x16)
-**
-** GUI_SET_ETHERNET_ADDR : Set the ethernet MAC address
-** byte 0,1 : length
-** byte 2 : command code 0x17
-** byte 3 : password length (should be 0x08)
-** byte 4-0x13 : should be "ArEcAvAr"
-** byte 0x14--0x19 : Ethernet MAC address (must be 6 bytes)
-** GUI_SET_LOGO : Set logo in HTTP
-** byte 0,1 : length
-** byte 2 : command code 0x18
-** byte 3 : Page# (0/1/2/3) (0xff --> clear OEM logo)
-** byte 4/5/6/7 : 0x55/0xaa/0xa5/0x5a
-** byte 8 : TITLE.JPG data (each page must be 2000 bytes)
-** note page0 1st 2 byte must be
-** actual length of the JPG file
-** GUI_POLL_EVENT : Poll If Event Log Changed
-** byte 0,1 : length
-** byte 2 : command code 0x19
-** GUI_GET_EVENT : Read Event
-** byte 0,1 : length
-** byte 2 : command code 0x1a
-** byte 3 : Event Page (0:1st page/1/2/3:last page)
-** GUI_GET_HW_MONITOR : Get HW monitor data
-** byte 0,1 : length
-** byte 2 : command code 0x1b
-** byte 3 : # of FANs(example 2)
-** byte 4 : # of Voltage sensor(example 3)
-** byte 5 : # of temperature sensor(example 2)
-** byte 6 : # of power
-** byte 7/8 : Fan#0 (RPM)
-** byte 9/10 : Fan#1
-** byte 11/12 : Voltage#0 original value in *1000
-** byte 13/14 : Voltage#0 value
-** byte 15/16 : Voltage#1 org
-** byte 17/18 : Voltage#1
-** byte 19/20 : Voltage#2 org
-** byte 21/22 : Voltage#2
-** byte 23 : Temp#0
-** byte 24 : Temp#1
-** byte 25 : Power indicator (bit0 : power#0,
-** bit1 : power#1)
-** byte 26 : UPS indicator
-** GUI_QUICK_CREATE : Quick create raid/volume set
-** byte 0,1 : length
-** byte 2 : command code 0x20
-** byte 3/4/5/6 : raw capacity
-** byte 7 : raid level
-** byte 8 : stripe size
-** byte 9 : spare
-** byte 10/11/12/13: device mask (the devices to create raid/volume)
-** This function is removed, application like
-** to implement quick create function
-** need to use GUI_CREATE_RAIDSET and GUI_CREATE_VOLUMESET function.
-** GUI_GET_INFO_R : Get Raid Set Information
-** byte 0,1 : length
-** byte 2 : command code 0x20
-** byte 3 : raidset#
-** typedef struct sGUI_RAIDSET
-** {
-** BYTE grsRaidSetName[16];
-** DWORD grsCapacity;
-** DWORD grsCapacityX;
-** DWORD grsFailMask;
-** BYTE grsDevArray[32];
-** BYTE grsMemberDevices;
-** BYTE grsNewMemberDevices;
-** BYTE grsRaidState;
-** BYTE grsVolumes;
-** BYTE grsVolumeList[16];
-** BYTE grsRes1;
-** BYTE grsRes2;
-** BYTE grsRes3;
-** BYTE grsFreeSegments;
-** DWORD grsRawStripes[8];
-** DWORD grsRes4;
-** DWORD grsRes5; // Total to 128 bytes
-** DWORD grsRes6; // Total to 128 bytes
-** } sGUI_RAIDSET, *pGUI_RAIDSET;
-** GUI_GET_INFO_V : Get Volume Set Information
-** byte 0,1 : length
-** byte 2 : command code 0x21
-** byte 3 : volumeset#
-** typedef struct sGUI_VOLUMESET
-** {
-** BYTE gvsVolumeName[16]; // 16
-** DWORD gvsCapacity;
-** DWORD gvsCapacityX;
-** DWORD gvsFailMask;
-** DWORD gvsStripeSize;
-** DWORD gvsNewFailMask;
-** DWORD gvsNewStripeSize;
-** DWORD gvsVolumeStatus;
-** DWORD gvsProgress; // 32
-** sSCSI_ATTR gvsScsi;
-** BYTE gvsMemberDisks;
-** BYTE gvsRaidLevel; // 8
-** BYTE gvsNewMemberDisks;
-** BYTE gvsNewRaidLevel;
-** BYTE gvsRaidSetNumber;
-** BYTE gvsRes0; // 4
-** BYTE gvsRes1[4]; // 64 bytes
-** } sGUI_VOLUMESET, *pGUI_VOLUMESET;
-** GUI_GET_INFO_P : Get Physical Drive Information
-** byte 0,1 : length
-** byte 2 : command code 0x22
-** byte 3 : drive # (from 0 to max-channels - 1)
-** typedef struct sGUI_PHY_DRV
-** {
-** BYTE gpdModelName[40];
-** BYTE gpdSerialNumber[20];
-** BYTE gpdFirmRev[8];
-** DWORD gpdCapacity;
-** DWORD gpdCapacityX; // Reserved for expansion
-** BYTE gpdDeviceState;
-** BYTE gpdPioMode;
-** BYTE gpdCurrentUdmaMode;
-** BYTE gpdUdmaMode;
-** BYTE gpdDriveSelect;
-** BYTE gpdRaidNumber; // 0xff if not belongs to a raid set
-** sSCSI_ATTR gpdScsi;
-** BYTE gpdReserved[40]; // Total to 128 bytes
-** } sGUI_PHY_DRV, *pGUI_PHY_DRV;
-** GUI_GET_INFO_S : Get System Information
-** byte 0,1 : length
-** byte 2 : command code 0x23
-** typedef struct sCOM_ATTR
-** {
-** BYTE comBaudRate;
-** BYTE comDataBits;
-** BYTE comStopBits;
-** BYTE comParity;
-** BYTE comFlowControl;
-** } sCOM_ATTR, *pCOM_ATTR;
-** typedef struct sSYSTEM_INFO
-** {
-** BYTE gsiVendorName[40];
-** BYTE gsiSerialNumber[16];
-** BYTE gsiFirmVersion[16];
-** BYTE gsiBootVersion[16];
-** BYTE gsiMbVersion[16];
-** BYTE gsiModelName[8];
-** BYTE gsiLocalIp[4];
-** BYTE gsiCurrentIp[4];
-** DWORD gsiTimeTick;
-** DWORD gsiCpuSpeed;
-** DWORD gsiICache;
-** DWORD gsiDCache;
-** DWORD gsiScache;
-** DWORD gsiMemorySize;
-** DWORD gsiMemorySpeed;
-** DWORD gsiEvents;
-** BYTE gsiMacAddress[6];
-** BYTE gsiDhcp;
-** BYTE gsiBeeper;
-** BYTE gsiChannelUsage;
-** BYTE gsiMaxAtaMode;
-** BYTE gsiSdramEcc; // 1:if ECC enabled
-** BYTE gsiRebuildPriority;
-** sCOM_ATTR gsiComA; // 5 bytes
-** sCOM_ATTR gsiComB; // 5 bytes
-** BYTE gsiIdeChannels;
-** BYTE gsiScsiHostChannels;
-** BYTE gsiIdeHostChannels;
-** BYTE gsiMaxVolumeSet;
-** BYTE gsiMaxRaidSet;
-** BYTE gsiEtherPort; // 1:if ether net port supported
-** BYTE gsiRaid6Engine; // 1:Raid6 engine supported
-** BYTE gsiRes[75];
-** } sSYSTEM_INFO, *pSYSTEM_INFO;
-** GUI_CLEAR_EVENT : Clear System Event
-** byte 0,1 : length
-** byte 2 : command code 0x24
-** GUI_MUTE_BEEPER : Mute current beeper
-** byte 0,1 : length
-** byte 2 : command code 0x30
-** GUI_BEEPER_SETTING : Disable beeper
-** byte 0,1 : length
-** byte 2 : command code 0x31
-** byte 3 : 0->disable, 1->enable
-** GUI_SET_PASSWORD : Change password
-** byte 0,1 : length
-** byte 2 : command code 0x32
-** byte 3 : pass word length ( must <= 15 )
-** byte 4 : password (must be alpha-numerical)
-** GUI_HOST_INTERFACE_MODE : Set host interface mode
-** byte 0,1 : length
-** byte 2 : command code 0x33
-** byte 3 : 0->Independent, 1->cluster
-** GUI_REBUILD_PRIORITY : Set rebuild priority
-** byte 0,1 : length
-** byte 2 : command code 0x34
-** byte 3 : 0/1/2/3 (low->high)
-** GUI_MAX_ATA_MODE : Set maximum ATA mode to be used
-** byte 0,1 : length
-** byte 2 : command code 0x35
-** byte 3 : 0/1/2/3 (133/100/66/33)
-** GUI_RESET_CONTROLLER : Reset Controller
-** byte 0,1 : length
-** byte 2 : command code 0x36
-** *Response with VT100 screen (discard it)
-** GUI_COM_PORT_SETTING : COM port setting
-** byte 0,1 : length
-** byte 2 : command code 0x37
-** byte 3 : 0->COMA (term port),
-** 1->COMB (debug port)
-** byte 4 : 0/1/2/3/4/5/6/7
-** (1200/2400/4800/9600/19200/38400/57600/115200)
-** byte 5 : data bit
-** (0:7 bit, 1:8 bit : must be 8 bit)
-** byte 6 : stop bit (0:1, 1:2 stop bits)
-** byte 7 : parity (0:none, 1:off, 2:even)
-** byte 8 : flow control
-** (0:none, 1:xon/xoff, 2:hardware => must use none)
-** GUI_NO_OPERATION : No operation
-** byte 0,1 : length
-** byte 2 : command code 0x38
-** GUI_DHCP_IP : Set DHCP option and local IP address
-** byte 0,1 : length
-** byte 2 : command code 0x39
-** byte 3 : 0:dhcp disabled, 1:dhcp enabled
-** byte 4/5/6/7 : IP address
-** GUI_CREATE_PASS_THROUGH : Create pass through disk
-** byte 0,1 : length
-** byte 2 : command code 0x40
-** byte 3 : device #
-** byte 4 : scsi channel (0/1)
-** byte 5 : scsi id (0-->15)
-** byte 6 : scsi lun (0-->7)
-** byte 7 : tagged queue (1 : enabled)
-** byte 8 : cache mode (1 : enabled)
-** byte 9 : max speed (0/1/2/3/4,
-** async/20/40/80/160 for scsi)
-** (0/1/2/3/4, 33/66/100/133/150 for ide )
-** GUI_MODIFY_PASS_THROUGH : Modify pass through disk
-** byte 0,1 : length
-** byte 2 : command code 0x41
-** byte 3 : device #
-** byte 4 : scsi channel (0/1)
-** byte 5 : scsi id (0-->15)
-** byte 6 : scsi lun (0-->7)
-** byte 7 : tagged queue (1 : enabled)
-** byte 8 : cache mode (1 : enabled)
-** byte 9 : max speed (0/1/2/3/4,
-** async/20/40/80/160 for scsi)
-** (0/1/2/3/4, 33/66/100/133/150 for ide )
-** GUI_DELETE_PASS_THROUGH : Delete pass through disk
-** byte 0,1 : length
-** byte 2 : command code 0x42
-** byte 3 : device# to be deleted
-** GUI_IDENTIFY_DEVICE : Identify Device
-** byte 0,1 : length
-** byte 2 : command code 0x43
-** byte 3 : Flash Method
-** (0:flash selected, 1:flash not selected)
-** byte 4/5/6/7 : IDE device mask to be flashed
-** note .... no response data available
-** GUI_CREATE_RAIDSET : Create Raid Set
-** byte 0,1 : length
-** byte 2 : command code 0x50
-** byte 3/4/5/6 : device mask
-** byte 7-22 : raidset name (if byte 7 == 0:use default)
-** GUI_DELETE_RAIDSET : Delete Raid Set
-** byte 0,1 : length
-** byte 2 : command code 0x51
-** byte 3 : raidset#
-** GUI_EXPAND_RAIDSET : Expand Raid Set
-** byte 0,1 : length
-** byte 2 : command code 0x52
-** byte 3 : raidset#
-** byte 4/5/6/7 : device mask for expansion
-** byte 8/9/10 : (8:0 no change, 1 change, 0xff:terminate,
-** 9:new raid level,
-** 10:new stripe size
-** 0/1/2/3/4/5->4/8/16/32/64/128K )
-** byte 11/12/13 : repeat for each volume in the raidset
-** GUI_ACTIVATE_RAIDSET : Activate incomplete raid set
-** byte 0,1 : length
-** byte 2 : command code 0x53
-** byte 3 : raidset#
-** GUI_CREATE_HOT_SPARE : Create hot spare disk
-** byte 0,1 : length
-** byte 2 : command code 0x54
-** byte 3/4/5/6 : device mask for hot spare creation
-** GUI_DELETE_HOT_SPARE : Delete hot spare disk
-** byte 0,1 : length
-** byte 2 : command code 0x55
-** byte 3/4/5/6 : device mask for hot spare deletion
-** GUI_CREATE_VOLUME : Create volume set
-** byte 0,1 : length
-** byte 2 : command code 0x60
-** byte 3 : raidset#
-** byte 4-19 : volume set name
-** (if byte4 == 0, use default)
-** byte 20-27 : volume capacity (blocks)
-** byte 28 : raid level
-** byte 29 : stripe size
-** (0/1/2/3/4/5->4/8/16/32/64/128K)
-** byte 30 : channel
-** byte 31 : ID
-** byte 32 : LUN
-** byte 33 : 1 enable tag
-** byte 34 : 1 enable cache
-** byte 35 : speed
-** (0/1/2/3/4->async/20/40/80/160 for scsi)
-** (0/1/2/3/4->33/66/100/133/150 for IDE )
-** byte 36 : 1 to select quick init
-**
-** GUI_MODIFY_VOLUME : Modify volume Set
-** byte 0,1 : length
-** byte 2 : command code 0x61
-** byte 3 : volumeset#
-** byte 4-19 : new volume set name
-** (if byte4 == 0, not change)
-** byte 20-27 : new volume capacity (reserved)
-** byte 28 : new raid level
-** byte 29 : new stripe size
-** (0/1/2/3/4/5->4/8/16/32/64/128K)
-** byte 30 : new channel
-** byte 31 : new ID
-** byte 32 : new LUN
-** byte 33 : 1 enable tag
-** byte 34 : 1 enable cache
-** byte 35 : speed
-** (0/1/2/3/4->async/20/40/80/160 for scsi)
-** (0/1/2/3/4->33/66/100/133/150 for IDE )
-** GUI_DELETE_VOLUME : Delete volume set
-** byte 0,1 : length
-** byte 2 : command code 0x62
-** byte 3 : volumeset#
-** GUI_START_CHECK_VOLUME : Start volume consistency check
-** byte 0,1 : length
-** byte 2 : command code 0x63
-** byte 3 : volumeset#
-** GUI_STOP_CHECK_VOLUME : Stop volume consistency check
-** byte 0,1 : length
-** byte 2 : command code 0x64
-** ---------------------------------------------------------------------
-** 4. Returned data
-** ---------------------------------------------------------------------
-** (A) Header : 3 bytes sequence (0x5E, 0x01, 0x61)
-** (B) Length : 2 bytes
-** (low byte 1st, excludes length and checksum byte)
-** (C) status or data :
-** <1> If length == 1 ==> 1 byte status code
-** #define GUI_OK 0x41
-** #define GUI_RAIDSET_NOT_NORMAL 0x42
-** #define GUI_VOLUMESET_NOT_NORMAL 0x43
-** #define GUI_NO_RAIDSET 0x44
-** #define GUI_NO_VOLUMESET 0x45
-** #define GUI_NO_PHYSICAL_DRIVE 0x46
-** #define GUI_PARAMETER_ERROR 0x47
-** #define GUI_UNSUPPORTED_COMMAND 0x48
-** #define GUI_DISK_CONFIG_CHANGED 0x49
-** #define GUI_INVALID_PASSWORD 0x4a
-** #define GUI_NO_DISK_SPACE 0x4b
-** #define GUI_CHECKSUM_ERROR 0x4c
-** #define GUI_PASSWORD_REQUIRED 0x4d
-** <2> If length > 1 ==>
-** data block returned from controller
-** and the contents depends on the command code
-** (E) Checksum : checksum of length and status or data byte
-**************************************************************************