summaryrefslogtreecommitdiff
path: root/Documentation/scsi/libsas.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/scsi/libsas.rst')
-rw-r--r--Documentation/scsi/libsas.rst465
1 files changed, 465 insertions, 0 deletions
diff --git a/Documentation/scsi/libsas.rst b/Documentation/scsi/libsas.rst
new file mode 100644
index 000000000000..7216b5d25800
--- /dev/null
+++ b/Documentation/scsi/libsas.rst
@@ -0,0 +1,465 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========
+SAS Layer
+=========
+
+The SAS Layer is a management infrastructure which manages
+SAS LLDDs. It sits between SCSI Core and SAS LLDDs. The
+layout is as follows: while SCSI Core is concerned with
+SAM/SPC issues, and a SAS LLDD+sequencer is concerned with
+phy/OOB/link management, the SAS layer is concerned with:
+
+ * SAS Phy/Port/HA event management (LLDD generates,
+ SAS Layer processes),
+ * SAS Port management (creation/destruction),
+ * SAS Domain discovery and revalidation,
+ * SAS Domain device management,
+ * SCSI Host registration/unregistration,
+ * Device registration with SCSI Core (SAS) or libata
+ (SATA), and
+ * Expander management and exporting expander control
+ to user space.
+
+A SAS LLDD is a PCI device driver. It is concerned with
+phy/OOB management, and vendor specific tasks and generates
+events to the SAS layer.
+
+The SAS Layer does most SAS tasks as outlined in the SAS 1.1
+spec.
+
+The sas_ha_struct describes the SAS LLDD to the SAS layer.
+Most of it is used by the SAS Layer but a few fields need to
+be initialized by the LLDDs.
+
+After initializing your hardware, from the probe() function
+you call sas_register_ha(). It will register your LLDD with
+the SCSI subsystem, creating a SCSI host and it will
+register your SAS driver with the sysfs SAS tree it creates.
+It will then return. Then you enable your phys to actually
+start OOB (at which point your driver will start calling the
+notify_* event callbacks).
+
+Structure descriptions
+======================
+
+``struct sas_phy``
+------------------
+
+Normally this is statically embedded to your driver's
+phy structure::
+
+ struct my_phy {
+ blah;
+ struct sas_phy sas_phy;
+ bleh;
+ };
+
+And then all the phys are an array of my_phy in your HA
+struct (shown below).
+
+Then as you go along and initialize your phys you also
+initialize the sas_phy struct, along with your own
+phy structure.
+
+In general, the phys are managed by the LLDD and the ports
+are managed by the SAS layer. So the phys are initialized
+and updated by the LLDD and the ports are initialized and
+updated by the SAS layer.
+
+There is a scheme where the LLDD can RW certain fields,
+and the SAS layer can only read such ones, and vice versa.
+The idea is to avoid unnecessary locking.
+
+enabled
+ - must be set (0/1)
+
+id
+ - must be set [0,MAX_PHYS)]
+
+class, proto, type, role, oob_mode, linkrate
+ - must be set
+
+oob_mode
+ - you set this when OOB has finished and then notify
+ the SAS Layer.
+
+sas_addr
+ - this normally points to an array holding the sas
+ address of the phy, possibly somewhere in your my_phy
+ struct.
+
+attached_sas_addr
+ - set this when you (LLDD) receive an
+ IDENTIFY frame or a FIS frame, _before_ notifying the SAS
+ layer. The idea is that sometimes the LLDD may want to fake
+ or provide a different SAS address on that phy/port and this
+ allows it to do this. At best you should copy the sas
+ address from the IDENTIFY frame or maybe generate a SAS
+ address for SATA directly attached devices. The Discover
+ process may later change this.
+
+frame_rcvd
+ - this is where you copy the IDENTIFY/FIS frame
+ when you get it; you lock, copy, set frame_rcvd_size and
+ unlock the lock, and then call the event. It is a pointer
+ since there's no way to know your hw frame size _exactly_,
+ so you define the actual array in your phy struct and let
+ this pointer point to it. You copy the frame from your
+ DMAable memory to that area holding the lock.
+
+sas_prim
+ - this is where primitives go when they're
+ received. See sas.h. Grab the lock, set the primitive,
+ release the lock, notify.
+
+port
+ - this points to the sas_port if the phy belongs
+ to a port -- the LLDD only reads this. It points to the
+ sas_port this phy is part of. Set by the SAS Layer.
+
+ha
+ - may be set; the SAS layer sets it anyway.
+
+lldd_phy
+ - you should set this to point to your phy so you
+ can find your way around faster when the SAS layer calls one
+ of your callbacks and passes you a phy. If the sas_phy is
+ embedded you can also use container_of -- whatever you
+ prefer.
+
+
+``struct sas_port``
+-------------------
+
+The LLDD doesn't set any fields of this struct -- it only
+reads them. They should be self explanatory.
+
+phy_mask is 32 bit, this should be enough for now, as I
+haven't heard of a HA having more than 8 phys.
+
+lldd_port
+ - I haven't found use for that -- maybe other
+ LLDD who wish to have internal port representation can make
+ use of this.
+
+``struct sas_ha_struct``
+------------------------
+
+It normally is statically declared in your own LLDD
+structure describing your adapter::
+
+ struct my_sas_ha {
+ blah;
+ struct sas_ha_struct sas_ha;
+ struct my_phy phys[MAX_PHYS];
+ struct sas_port sas_ports[MAX_PHYS]; /* (1) */
+ bleh;
+ };
+
+ (1) If your LLDD doesn't have its own port representation.
+
+What needs to be initialized (sample function given below).
+
+pcidev
+^^^^^^
+
+sas_addr
+ - since the SAS layer doesn't want to mess with
+ memory allocation, etc, this points to statically
+ allocated array somewhere (say in your host adapter
+ structure) and holds the SAS address of the host
+ adapter as given by you or the manufacturer, etc.
+
+sas_port
+^^^^^^^^
+
+sas_phy
+ - an array of pointers to structures. (see
+ note above on sas_addr).
+ These must be set. See more notes below.
+
+num_phys
+ - the number of phys present in the sas_phy array,
+ and the number of ports present in the sas_port
+ array. There can be a maximum num_phys ports (one per
+ port) so we drop the num_ports, and only use
+ num_phys.
+
+The event interface::
+
+ /* LLDD calls these to notify the class of an event. */
+ void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
+ void (*notify_port_event)(struct sas_phy *, enum port_event);
+ void (*notify_phy_event)(struct sas_phy *, enum phy_event);
+
+When sas_register_ha() returns, those are set and can be
+called by the LLDD to notify the SAS layer of such events
+the SAS layer.
+
+The port notification::
+
+ /* The class calls these to notify the LLDD of an event. */
+ void (*lldd_port_formed)(struct sas_phy *);
+ void (*lldd_port_deformed)(struct sas_phy *);
+
+If the LLDD wants notification when a port has been formed
+or deformed it sets those to a function satisfying the type.
+
+A SAS LLDD should also implement at least one of the Task
+Management Functions (TMFs) described in SAM::
+
+ /* Task Management Functions. Must be called from process context. */
+ int (*lldd_abort_task)(struct sas_task *);
+ int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_I_T_nexus_reset)(struct domain_device *);
+ int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
+ int (*lldd_query_task)(struct sas_task *);
+
+For more information please read SAM from T10.org.
+
+Port and Adapter management::
+
+ /* Port and Adapter management */
+ int (*lldd_clear_nexus_port)(struct sas_port *);
+ int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
+
+A SAS LLDD should implement at least one of those.
+
+Phy management::
+
+ /* Phy management */
+ int (*lldd_control_phy)(struct sas_phy *, enum phy_func);
+
+lldd_ha
+ - set this to point to your HA struct. You can also
+ use container_of if you embedded it as shown above.
+
+A sample initialization and registration function
+can look like this (called last thing from probe())
+*but* before you enable the phys to do OOB::
+
+ static int register_sas_ha(struct my_sas_ha *my_ha)
+ {
+ int i;
+ static struct sas_phy *sas_phys[MAX_PHYS];
+ static struct sas_port *sas_ports[MAX_PHYS];
+
+ my_ha->sas_ha.sas_addr = &my_ha->sas_addr[0];
+
+ for (i = 0; i < MAX_PHYS; i++) {
+ sas_phys[i] = &my_ha->phys[i].sas_phy;
+ sas_ports[i] = &my_ha->sas_ports[i];
+ }
+
+ my_ha->sas_ha.sas_phy = sas_phys;
+ my_ha->sas_ha.sas_port = sas_ports;
+ my_ha->sas_ha.num_phys = MAX_PHYS;
+
+ my_ha->sas_ha.lldd_port_formed = my_port_formed;
+
+ my_ha->sas_ha.lldd_dev_found = my_dev_found;
+ my_ha->sas_ha.lldd_dev_gone = my_dev_gone;
+
+ my_ha->sas_ha.lldd_execute_task = my_execute_task;
+
+ my_ha->sas_ha.lldd_abort_task = my_abort_task;
+ my_ha->sas_ha.lldd_abort_task_set = my_abort_task_set;
+ my_ha->sas_ha.lldd_clear_aca = my_clear_aca;
+ my_ha->sas_ha.lldd_clear_task_set = my_clear_task_set;
+ my_ha->sas_ha.lldd_I_T_nexus_reset= NULL; (2)
+ my_ha->sas_ha.lldd_lu_reset = my_lu_reset;
+ my_ha->sas_ha.lldd_query_task = my_query_task;
+
+ my_ha->sas_ha.lldd_clear_nexus_port = my_clear_nexus_port;
+ my_ha->sas_ha.lldd_clear_nexus_ha = my_clear_nexus_ha;
+
+ my_ha->sas_ha.lldd_control_phy = my_control_phy;
+
+ return sas_register_ha(&my_ha->sas_ha);
+ }
+
+(2) SAS 1.1 does not define I_T Nexus Reset TMF.
+
+Events
+======
+
+Events are **the only way** a SAS LLDD notifies the SAS layer
+of anything. There is no other method or way a LLDD to tell
+the SAS layer of anything happening internally or in the SAS
+domain.
+
+Phy events::
+
+ PHYE_LOSS_OF_SIGNAL, (C)
+ PHYE_OOB_DONE,
+ PHYE_OOB_ERROR, (C)
+ PHYE_SPINUP_HOLD.
+
+Port events, passed on a _phy_::
+
+ PORTE_BYTES_DMAED, (M)
+ PORTE_BROADCAST_RCVD, (E)
+ PORTE_LINK_RESET_ERR, (C)
+ PORTE_TIMER_EVENT, (C)
+ PORTE_HARD_RESET.
+
+Host Adapter event:
+ HAE_RESET
+
+A SAS LLDD should be able to generate
+
+ - at least one event from group C (choice),
+ - events marked M (mandatory) are mandatory (only one),
+ - events marked E (expander) if it wants the SAS layer
+ to handle domain revalidation (only one such).
+ - Unmarked events are optional.
+
+Meaning:
+
+HAE_RESET
+ - when your HA got internal error and was reset.
+
+PORTE_BYTES_DMAED
+ - on receiving an IDENTIFY/FIS frame
+
+PORTE_BROADCAST_RCVD
+ - on receiving a primitive
+
+PORTE_LINK_RESET_ERR
+ - timer expired, loss of signal, loss of DWS, etc. [1]_
+
+PORTE_TIMER_EVENT
+ - DWS reset timeout timer expired [1]_
+
+PORTE_HARD_RESET
+ - Hard Reset primitive received.
+
+PHYE_LOSS_OF_SIGNAL
+ - the device is gone [1]_
+
+PHYE_OOB_DONE
+ - OOB went fine and oob_mode is valid
+
+PHYE_OOB_ERROR
+ - Error while doing OOB, the device probably
+ got disconnected. [1]_
+
+PHYE_SPINUP_HOLD
+ - SATA is present, COMWAKE not sent.
+
+.. [1] should set/clear the appropriate fields in the phy,
+ or alternatively call the inlined sas_phy_disconnected()
+ which is just a helper, from their tasklet.
+
+The Execute Command SCSI RPC::
+
+ int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags);
+
+Used to queue a task to the SAS LLDD. @task is the task to be executed.
+@gfp_mask is the gfp_mask defining the context of the caller.
+
+This function should implement the Execute Command SCSI RPC,
+
+That is, when lldd_execute_task() is called, the command
+go out on the transport *immediately*. There is *no*
+queuing of any sort and at any level in a SAS LLDD.
+
+Returns:
+
+ * -SAS_QUEUE_FULL, -ENOMEM, nothing was queued;
+ * 0, the task(s) were queued.
+
+::
+
+ struct sas_task {
+ dev -- the device this task is destined to
+ task_proto -- _one_ of enum sas_proto
+ scatter -- pointer to scatter gather list array
+ num_scatter -- number of elements in scatter
+ total_xfer_len -- total number of bytes expected to be transferred
+ data_dir -- PCI_DMA_...
+ task_done -- callback when the task has finished execution
+ };
+
+Discovery
+=========
+
+The sysfs tree has the following purposes:
+
+ a) It shows you the physical layout of the SAS domain at
+ the current time, i.e. how the domain looks in the
+ physical world right now.
+ b) Shows some device parameters _at_discovery_time_.
+
+This is a link to the tree(1) program, very useful in
+viewing the SAS domain:
+ftp://mama.indstate.edu/linux/tree/
+
+I expect user space applications to actually create a
+graphical interface of this.
+
+That is, the sysfs domain tree doesn't show or keep state if
+you e.g., change the meaning of the READY LED MEANING
+setting, but it does show you the current connection status
+of the domain device.
+
+Keeping internal device state changes is responsibility of
+upper layers (Command set drivers) and user space.
+
+When a device or devices are unplugged from the domain, this
+is reflected in the sysfs tree immediately, and the device(s)
+removed from the system.
+
+The structure domain_device describes any device in the SAS
+domain. It is completely managed by the SAS layer. A task
+points to a domain device, this is how the SAS LLDD knows
+where to send the task(s) to. A SAS LLDD only reads the
+contents of the domain_device structure, but it never creates
+or destroys one.
+
+Expander management from User Space
+===================================
+
+In each expander directory in sysfs, there is a file called
+"smp_portal". It is a binary sysfs attribute file, which
+implements an SMP portal (Note: this is *NOT* an SMP port),
+to which user space applications can send SMP requests and
+receive SMP responses.
+
+Functionality is deceptively simple:
+
+1. Build the SMP frame you want to send. The format and layout
+ is described in the SAS spec. Leave the CRC field equal 0.
+
+open(2)
+
+2. Open the expander's SMP portal sysfs file in RW mode.
+
+write(2)
+
+3. Write the frame you built in 1.
+
+read(2)
+
+4. Read the amount of data you expect to receive for the frame you built.
+ If you receive different amount of data you expected to receive,
+ then there was some kind of error.
+
+close(2)
+
+All this process is shown in detail in the function do_smp_func()
+and its callers, in the file "expander_conf.c".
+
+The kernel functionality is implemented in the file
+"sas_expander.c".
+
+The program "expander_conf.c" implements this. It takes one
+argument, the sysfs file name of the SMP portal to the
+expander, and gives expander information, including routing
+tables.
+
+The SMP portal gives you complete control of the expander,
+so please be careful.