diff options
Diffstat (limited to 'Documentation/sound/oss/ESS1868')
| -rw-r--r-- | Documentation/sound/oss/ESS1868 | 55 |
1 files changed, 0 insertions, 55 deletions
diff --git a/Documentation/sound/oss/ESS1868 b/Documentation/sound/oss/ESS1868 deleted file mode 100644 index 55e922f21bc0..000000000000 --- a/Documentation/sound/oss/ESS1868 +++ /dev/null @@ -1,55 +0,0 @@ -Documentation for the ESS1868F AudioDrive PnP sound card - -The ESS1868 sound card is a PnP ESS1688-compatible 16-bit sound card. - -It should be automatically detected by the Linux Kernel isapnp support when you -load the sb.o module. Otherwise you should take care of: - - * The ESS1868 does not allow use of a 16-bit DMA, thus DMA 0, 1, 2, and 3 - may only be used. - - * isapnptools version 1.14 does work with ESS1868. Earlier versions might - not. - - * Sound support MUST be compiled as MODULES, not statically linked - into the kernel. - - -NOTE: this is only needed when not using the kernel isapnp support! - -For configuring the sound card's I/O addresses, IRQ and DMA, here is a -sample copy of the isapnp.conf directives regarding the ESS1868: - -(CONFIGURE ESS1868/-1 (LD 1 -(IO 0 (BASE 0x0220)) -(IO 1 (BASE 0x0388)) -(IO 2 (BASE 0x0330)) -(DMA 0 (CHANNEL 1)) -(INT 0 (IRQ 5 (MODE +E))) -(ACT Y) -)) - -(for a full working isapnp.conf file, remember the -(ISOLATE) -(IDENTIFY *) -at the beginning and the -(WAITFORKEY) -at the end.) - -In this setup, the main card I/O is 0x0220, FM synthesizer is 0x0388, and -the MPU-401 MIDI port is located at 0x0330. IRQ is IRQ 5, DMA is channel 1. - -After configuring the sound card via isapnp, to use the card you must load -the sound modules with the proper I/O information. Here is my setup: - -# ESS1868F AudioDrive initialization - -/sbin/modprobe sound -/sbin/insmod uart401 -/sbin/insmod sb io=0x220 irq=5 dma=1 dma16=-1 -/sbin/insmod mpu401 io=0x330 -/sbin/insmod opl3 io=0x388 -/sbin/insmod v_midi - -opl3 is the FM synthesizer -/sbin/insmod opl3 io=0x388 |