summaryrefslogtreecommitdiff
path: root/Documentation/usb/iuu_phoenix.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/usb/iuu_phoenix.txt')
-rw-r--r--Documentation/usb/iuu_phoenix.txt34
1 files changed, 22 insertions, 12 deletions
diff --git a/Documentation/usb/iuu_phoenix.txt b/Documentation/usb/iuu_phoenix.txt
index e5f048067da4..b76268728450 100644
--- a/Documentation/usb/iuu_phoenix.txt
+++ b/Documentation/usb/iuu_phoenix.txt
@@ -1,5 +1,6 @@
+=============================
Infinity Usb Unlimited Readme
------------------------------
+=============================
Hi all,
@@ -19,7 +20,8 @@ have his own device file(/dev/ttyUSB0,/dev/ttyUSB1,...)
-How to tune the reader speed ?
+How to tune the reader speed?
+=============================
A few parameters can be used at load time
To use parameters, just unload the module if it is
@@ -27,26 +29,33 @@ How to tune the reader speed ?
In case of prebuilt module, use the command
insmod iuu_phoenix param=value.
- Example:
+ Example::
- modprobe iuu_phoenix clockmode=3
+ modprobe iuu_phoenix clockmode=3
The parameters are:
- parm: clockmode:1=3Mhz579,2=3Mhz680,3=6Mhz (int)
- parm: boost:overclock boost percent 100 to 500 (int)
- parm: cdmode:Card detect mode 0=none, 1=CD, 2=!CD, 3=DSR, 4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING (int)
- parm: xmas:xmas color enabled or not (bool)
- parm: debug:Debug enabled or not (bool)
+clockmode:
+ 1=3Mhz579,2=3Mhz680,3=6Mhz (int)
+boost:
+ overclock boost percent 100 to 500 (int)
+cdmode:
+ Card detect mode
+ 0=none, 1=CD, 2=!CD, 3=DSR, 4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING (int)
+xmas:
+ xmas color enabled or not (bool)
+debug:
+ Debug enabled or not (bool)
- clockmode will provide 3 different base settings commonly adopted by
different software:
- 1. 3Mhz579
+
+ 1. 3Mhz579
2. 3Mhz680
3. 6Mhz
- boost provide a way to overclock the reader ( my favorite :-) )
- For example to have best performance than a simple clockmode=3, try this:
+ For example to have best performance than a simple clockmode=3, try this::
modprobe boost=195
@@ -66,7 +75,8 @@ How to tune the reader speed ?
- debug will produce a lot of debugging messages...
- Last notes:
+Last notes
+==========
Don't worry about the serial settings, the serial emulation
is an abstraction, so use any speed or parity setting will