diff options
Diffstat (limited to 'Documentation/userspace-api')
16 files changed, 337 insertions, 106 deletions
diff --git a/Documentation/userspace-api/futex2.rst b/Documentation/userspace-api/futex2.rst new file mode 100644 index 000000000000..9693f47a7e62 --- /dev/null +++ b/Documentation/userspace-api/futex2.rst @@ -0,0 +1,86 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====== +futex2 +====== + +:Author: André Almeida <andrealmeid@collabora.com> + +futex, or fast user mutex, is a set of syscalls to allow userspace to create +performant synchronization mechanisms, such as mutexes, semaphores and +conditional variables in userspace. C standard libraries, like glibc, uses it +as a means to implement more high level interfaces like pthreads. + +futex2 is a followup version of the initial futex syscall, designed to overcome +limitations of the original interface. + +User API +======== + +``futex_waitv()`` +----------------- + +Wait on an array of futexes, wake on any:: + + futex_waitv(struct futex_waitv *waiters, unsigned int nr_futexes, + unsigned int flags, struct timespec *timeout, clockid_t clockid) + + struct futex_waitv { + __u64 val; + __u64 uaddr; + __u32 flags; + __u32 __reserved; + }; + +Userspace sets an array of struct futex_waitv (up to a max of 128 entries), +using ``uaddr`` for the address to wait for, ``val`` for the expected value +and ``flags`` to specify the type (e.g. private) and size of futex. +``__reserved`` needs to be 0, but it can be used for future extension. The +pointer for the first item of the array is passed as ``waiters``. An invalid +address for ``waiters`` or for any ``uaddr`` returns ``-EFAULT``. + +If userspace has 32-bit pointers, it should do a explicit cast to make sure +the upper bits are zeroed. ``uintptr_t`` does the tricky and it works for +both 32/64-bit pointers. + +``nr_futexes`` specifies the size of the array. Numbers out of [1, 128] +interval will make the syscall return ``-EINVAL``. + +The ``flags`` argument of the syscall needs to be 0, but it can be used for +future extension. + +For each entry in ``waiters`` array, the current value at ``uaddr`` is compared +to ``val``. If it's different, the syscall undo all the work done so far and +return ``-EAGAIN``. If all tests and verifications succeeds, syscall waits until +one of the following happens: + +- The timeout expires, returning ``-ETIMEOUT``. +- A signal was sent to the sleeping task, returning ``-ERESTARTSYS``. +- Some futex at the list was woken, returning the index of some waked futex. + +An example of how to use the interface can be found at ``tools/testing/selftests/futex/functional/futex_waitv.c``. + +Timeout +------- + +``struct timespec *timeout`` argument is an optional argument that points to an +absolute timeout. You need to specify the type of clock being used at +``clockid`` argument. ``CLOCK_MONOTONIC`` and ``CLOCK_REALTIME`` are supported. +This syscall accepts only 64bit timespec structs. + +Types of futex +-------------- + +A futex can be either private or shared. Private is used for processes that +shares the same memory space and the virtual address of the futex will be the +same for all processes. This allows for optimizations in the kernel. To use +private futexes, it's necessary to specify ``FUTEX_PRIVATE_FLAG`` in the futex +flag. For processes that doesn't share the same memory space and therefore can +have different virtual addresses for the same futex (using, for instance, a +file-backed shared memory) requires different internal mechanisms to be get +properly enqueued. This is the default behavior, and it works with both private +and shared futexes. + +Futexes can be of different sizes: 8, 16, 32 or 64 bits. Currently, the only +supported one is 32 bit sized futex, and it need to be specified using +``FUTEX_32`` flag. diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst index c432be070f67..a61eac0c73f8 100644 --- a/Documentation/userspace-api/index.rst +++ b/Documentation/userspace-api/index.rst @@ -28,6 +28,7 @@ place where this information is gathered. media/index sysfs-platform_profile vduse + futex2 .. only:: subproject and html diff --git a/Documentation/userspace-api/ioctl/cdrom.rst b/Documentation/userspace-api/ioctl/cdrom.rst index 3b4c0506de46..682948fc88a3 100644 --- a/Documentation/userspace-api/ioctl/cdrom.rst +++ b/Documentation/userspace-api/ioctl/cdrom.rst @@ -13,61 +13,64 @@ in drivers/cdrom/cdrom.c and drivers/block/scsi_ioctl.c ioctl values are listed in <linux/cdrom.h>. As of this writing, they are as follows: - ====================== =============================================== - CDROMPAUSE Pause Audio Operation - CDROMRESUME Resume paused Audio Operation - CDROMPLAYMSF Play Audio MSF (struct cdrom_msf) - CDROMPLAYTRKIND Play Audio Track/index (struct cdrom_ti) - CDROMREADTOCHDR Read TOC header (struct cdrom_tochdr) - CDROMREADTOCENTRY Read TOC entry (struct cdrom_tocentry) - CDROMSTOP Stop the cdrom drive - CDROMSTART Start the cdrom drive - CDROMEJECT Ejects the cdrom media - CDROMVOLCTRL Control output volume (struct cdrom_volctrl) - CDROMSUBCHNL Read subchannel data (struct cdrom_subchnl) - CDROMREADMODE2 Read CDROM mode 2 data (2336 Bytes) - (struct cdrom_read) - CDROMREADMODE1 Read CDROM mode 1 data (2048 Bytes) - (struct cdrom_read) - CDROMREADAUDIO (struct cdrom_read_audio) - CDROMEJECT_SW enable(1)/disable(0) auto-ejecting - CDROMMULTISESSION Obtain the start-of-last-session - address of multi session disks - (struct cdrom_multisession) - CDROM_GET_MCN Obtain the "Universal Product Code" - if available (struct cdrom_mcn) - CDROM_GET_UPC Deprecated, use CDROM_GET_MCN instead. - CDROMRESET hard-reset the drive - CDROMVOLREAD Get the drive's volume setting - (struct cdrom_volctrl) - CDROMREADRAW read data in raw mode (2352 Bytes) - (struct cdrom_read) - CDROMREADCOOKED read data in cooked mode - CDROMSEEK seek msf address - CDROMPLAYBLK scsi-cd only, (struct cdrom_blk) - CDROMREADALL read all 2646 bytes - CDROMGETSPINDOWN return 4-bit spindown value - CDROMSETSPINDOWN set 4-bit spindown value - CDROMCLOSETRAY pendant of CDROMEJECT - CDROM_SET_OPTIONS Set behavior options - CDROM_CLEAR_OPTIONS Clear behavior options - CDROM_SELECT_SPEED Set the CD-ROM speed - CDROM_SELECT_DISC Select disc (for juke-boxes) - CDROM_MEDIA_CHANGED Check is media changed - CDROM_DRIVE_STATUS Get tray position, etc. - CDROM_DISC_STATUS Get disc type, etc. - CDROM_CHANGER_NSLOTS Get number of slots - CDROM_LOCKDOOR lock or unlock door - CDROM_DEBUG Turn debug messages on/off - CDROM_GET_CAPABILITY get capabilities - CDROMAUDIOBUFSIZ set the audio buffer size - DVD_READ_STRUCT Read structure - DVD_WRITE_STRUCT Write structure - DVD_AUTH Authentication - CDROM_SEND_PACKET send a packet to the drive - CDROM_NEXT_WRITABLE get next writable block - CDROM_LAST_WRITTEN get last block written on disc - ====================== =============================================== + ======================== =============================================== + CDROMPAUSE Pause Audio Operation + CDROMRESUME Resume paused Audio Operation + CDROMPLAYMSF Play Audio MSF (struct cdrom_msf) + CDROMPLAYTRKIND Play Audio Track/index (struct cdrom_ti) + CDROMREADTOCHDR Read TOC header (struct cdrom_tochdr) + CDROMREADTOCENTRY Read TOC entry (struct cdrom_tocentry) + CDROMSTOP Stop the cdrom drive + CDROMSTART Start the cdrom drive + CDROMEJECT Ejects the cdrom media + CDROMVOLCTRL Control output volume (struct cdrom_volctrl) + CDROMSUBCHNL Read subchannel data (struct cdrom_subchnl) + CDROMREADMODE2 Read CDROM mode 2 data (2336 Bytes) + (struct cdrom_read) + CDROMREADMODE1 Read CDROM mode 1 data (2048 Bytes) + (struct cdrom_read) + CDROMREADAUDIO (struct cdrom_read_audio) + CDROMEJECT_SW enable(1)/disable(0) auto-ejecting + CDROMMULTISESSION Obtain the start-of-last-session + address of multi session disks + (struct cdrom_multisession) + CDROM_GET_MCN Obtain the "Universal Product Code" + if available (struct cdrom_mcn) + CDROM_GET_UPC Deprecated, use CDROM_GET_MCN instead. + CDROMRESET hard-reset the drive + CDROMVOLREAD Get the drive's volume setting + (struct cdrom_volctrl) + CDROMREADRAW read data in raw mode (2352 Bytes) + (struct cdrom_read) + CDROMREADCOOKED read data in cooked mode + CDROMSEEK seek msf address + CDROMPLAYBLK scsi-cd only, (struct cdrom_blk) + CDROMREADALL read all 2646 bytes + CDROMGETSPINDOWN return 4-bit spindown value + CDROMSETSPINDOWN set 4-bit spindown value + CDROMCLOSETRAY pendant of CDROMEJECT + CDROM_SET_OPTIONS Set behavior options + CDROM_CLEAR_OPTIONS Clear behavior options + CDROM_SELECT_SPEED Set the CD-ROM speed + CDROM_SELECT_DISC Select disc (for juke-boxes) + CDROM_MEDIA_CHANGED Check is media changed + CDROM_TIMED_MEDIA_CHANGE Check if media changed + since given time + (struct cdrom_timed_media_change_info) + CDROM_DRIVE_STATUS Get tray position, etc. + CDROM_DISC_STATUS Get disc type, etc. + CDROM_CHANGER_NSLOTS Get number of slots + CDROM_LOCKDOOR lock or unlock door + CDROM_DEBUG Turn debug messages on/off + CDROM_GET_CAPABILITY get capabilities + CDROMAUDIOBUFSIZ set the audio buffer size + DVD_READ_STRUCT Read structure + DVD_WRITE_STRUCT Write structure + DVD_AUTH Authentication + CDROM_SEND_PACKET send a packet to the drive + CDROM_NEXT_WRITABLE get next writable block + CDROM_LAST_WRITTEN get last block written on disc + ======================== =============================================== The information that follows was determined from reading kernel source diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 2e8134059c87..cfe6cccf0f44 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -88,6 +88,7 @@ Code Seq# Include File Comments <http://infiniband.sourceforge.net/> 0x20 all drivers/cdrom/cm206.h 0x22 all scsi/sg.h +0x3E 00-0F linux/counter.h <mailto:linux-iio@vger.kernel.org> '!' 00-1F uapi/linux/seccomp.h '#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem @@ -104,6 +105,7 @@ Code Seq# Include File Comments '8' all SNP8023 advanced NIC card <mailto:mcr@solidum.com> ';' 64-7F linux/vfio.h +'=' 00-3f uapi/linux/ptp_clock.h <mailto:richardcochran@gmail.com> '@' 00-0F linux/radeonfb.h conflict! '@' 00-0F drivers/video/aty/aty128fb.c conflict! 'A' 00-1F linux/apm_bios.h conflict! diff --git a/Documentation/userspace-api/media/drivers/cx2341x-uapi.rst b/Documentation/userspace-api/media/drivers/cx2341x-uapi.rst index 8a7977af79d5..debde65fb8cd 100644 --- a/Documentation/userspace-api/media/drivers/cx2341x-uapi.rst +++ b/Documentation/userspace-api/media/drivers/cx2341x-uapi.rst @@ -7,9 +7,7 @@ Non-compressed file format -------------------------- The cx23416 can produce (and the cx23415 can also read) raw YUV output. The -format of a YUV frame is specific to this chip and is called HM12. 'HM' stands -for 'Hauppauge Macroblock', which is a misnomer as 'Conexant Macroblock' would -be more accurate. +format of a YUV frame is 16x16 linear tiled NV12 (V4L2_PIX_FMT_NV12_16L16). The format is YUV 4:2:0 which uses 1 Y byte per pixel and 1 U and V byte per four pixels. @@ -34,8 +32,8 @@ second line of 8 UV pairs of the top-left block, etc. After transmitting this block the first line of the block on the right to the first block is transmitted, etc. -The code below is given as an example on how to convert HM12 to separate -Y, U and V planes. This code assumes frames of 720x576 (PAL) pixels. +The code below is given as an example on how to convert V4L2_PIX_FMT_NV12_16L16 +to separate Y, U and V planes. This code assumes frames of 720x576 (PAL) pixels. The width of a frame is always 720 pixels, regardless of the actual specified width. diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst index e991ba73d873..4638ec64db00 100644 --- a/Documentation/userspace-api/media/v4l/buffer.rst +++ b/Documentation/userspace-api/media/v4l/buffer.rst @@ -676,8 +676,6 @@ Buffer Flags \normalsize -.. _memory-flags: - enum v4l2_memory ================ @@ -701,6 +699,44 @@ enum v4l2_memory - 4 - The buffer is used for :ref:`DMA shared buffer <dmabuf>` I/O. +.. _memory-flags: + +Memory Consistency Flags +------------------------ + +.. raw:: latex + + \small + +.. tabularcolumns:: |p{7.0cm}|p{2.1cm}|p{8.4cm}| + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 4 + + * .. _`V4L2-MEMORY-FLAG-NON-COHERENT`: + + - ``V4L2_MEMORY_FLAG_NON_COHERENT`` + - 0x00000001 + - A buffer is allocated either in coherent (it will be automatically + coherent between the CPU and the bus) or non-coherent memory. The + latter can provide performance gains, for instance the CPU cache + sync/flush operations can be avoided if the buffer is accessed by the + corresponding device only and the CPU does not read/write to/from that + buffer. However, this requires extra care from the driver -- it must + guarantee memory consistency by issuing a cache flush/sync when + consistency is needed. If this flag is set V4L2 will attempt to + allocate the buffer in non-coherent memory. The flag takes effect + only if the buffer is used for :ref:`memory mapping <mmap>` I/O and the + queue reports the :ref:`V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS + <V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS>` capability. + +.. raw:: latex + + \normalsize Timecodes ========= diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index 976d34445a24..e141f0e4eec9 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -3088,6 +3088,63 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - \normalsize +``V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX (struct)`` + Specifies the HEVC scaling matrix parameters used for the scaling process + for transform coefficients. + These matrix and parameters are defined according to :ref:`hevc`. + They are described in section 7.4.5 "Scaling list data semantics" of + the specification. + +.. c:type:: v4l2_ctrl_hevc_scaling_matrix + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}| + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_hevc_scaling_matrix + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``scaling_list_4x4[6][16]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_8x8[6][64]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_16x16[6][64]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_32x32[2][64]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_dc_coef_16x16[6]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_dc_coef_32x32[2]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + +.. raw:: latex + + \normalsize + .. c:type:: v4l2_hevc_dpb_entry .. raw:: latex diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst index de43f5c8486d..71f23f131f97 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst @@ -72,3 +72,23 @@ Image Source Control IDs * - __u32 - ``height`` - Height of the area. + +``V4L2_CID_NOTIFY_GAINS (integer array)`` + The sensor is notified what gains will be applied to the different + colour channels by subsequent processing (such as by an ISP). The + sensor is merely informed of these values in case it performs + processing that requires them, but it does not apply them itself to + the output pixels. + + Currently it is defined only for Bayer sensors, and is an array + control taking 4 gain values, being the gains for each of the + Bayer channels. The gains are always in the order B, Gb, Gr and R, + irrespective of the exact Bayer order of the sensor itself. + + The use of an array allows this control to be extended to sensors + with, for example, non-Bayer CFAs (colour filter arrays). + + The units for the gain values are linear, with the default value + representing a gain of exactly 1.0. For example, if this default value + is reported as being (say) 128, then a value of 192 would represent + a gain of exactly 1.5. diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst index 0b879c0da713..2f2133b4cd9c 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst @@ -48,14 +48,6 @@ please make a proposal on the linux-media mailing list. - ``V4L2_PIX_FMT_HI240`` - 'HI24' - 8 bit RGB format used by the BTTV driver. - * .. _V4L2-PIX-FMT-HM12: - - - ``V4L2_PIX_FMT_HM12`` - - 'HM12' - - YUV 4:2:0 format used by the IVTV driver. - - The format is documented in the kernel sources in the file - ``Documentation/userspace-api/media/drivers/cx2341x-uapi.rst`` * .. _V4L2-PIX-FMT-CPIA1: - ``V4L2_PIX_FMT_CPIA1`` @@ -246,20 +238,13 @@ please make a proposal on the linux-media mailing list. It is an opaque intermediate format and the MDP hardware must be used to convert ``V4L2_PIX_FMT_MT21C`` to ``V4L2_PIX_FMT_NV12M``, ``V4L2_PIX_FMT_YUV420M`` or ``V4L2_PIX_FMT_YVU420``. - * .. _V4L2-PIX-FMT-SUNXI-TILED-NV12: - - - ``V4L2_PIX_FMT_SUNXI_TILED_NV12`` - - 'ST12' - - Two-planar NV12-based format used by the video engine found on Allwinner - (codenamed sunxi) platforms, with 32x32 tiles for the luminance plane - and 32x64 tiles for the chrominance plane. The data in each tile is - stored in linear order, within the tile bounds. Each tile follows the - previous one linearly in memory (from left to right, top to bottom). - - The associated buffer dimensions are aligned to match an integer number - of tiles, resulting in 32-aligned resolutions for the luminance plane - and 16-aligned resolutions for the chrominance plane (with 2x2 - subsampling). + * .. _V4L2-PIX-FMT-MM21: + + - ``V4L2_PIX_FMT_MM21`` + - 'MM21' + - Non-compressed, tiled two-planar format used by Mediatek MT8183. + This is an opaque intermediate format and the MDP3 hardware can be + used to convert it to other formats. .. raw:: latex diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst index 090c091affd2..3a09d93d405b 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst @@ -99,7 +99,7 @@ All components are stored with the same number of bits per component. - 4:2:0 - Cb, Cr - No - - 64x32 macroblocks + - 64x32 tiles Horizontal Z order * - V4L2_PIX_FMT_NV12MT_16X16 @@ -108,7 +108,7 @@ All components are stored with the same number of bits per component. - 4:2:2 - Cb, Cr - No - - 16x16 macroblocks + - 16x16 tiles * - V4L2_PIX_FMT_NV16 - 'NV16' - 8 @@ -254,27 +254,47 @@ of the luma plane. .. _V4L2-PIX-FMT-NV12MT: .. _V4L2-PIX-FMT-NV12MT-16X16: +.. _V4L2-PIX-FMT-NV12-4L4: +.. _V4L2-PIX-FMT-NV12-16L16: +.. _V4L2-PIX-FMT-NV12-32L32: -NV12MT and MV12MT_16X16 ------------------------ +Tiled NV12 +---------- Semi-planar YUV 4:2:0 formats, using macroblock tiling. The chroma plane is subsampled by 2 in each direction. Chroma lines contain half the number of pixels and the same number of bytes as luma lines, and the chroma plane -contains half the number of lines of the luma plane. +contains half the number of lines of the luma plane. Each tile follows the +previous one linearly in memory (from left to right, top to bottom). + +``V4L2_PIX_FMT_NV12MT_16X16`` is similar to ``V4L2_PIX_FMT_NV12M`` but stores +pixels in 2D 16x16 tiles, and stores tiles linearly in memory. +The line stride and image height must be aligned to a multiple of 16. +The layouts of the luma and chroma planes are identical. + +``V4L2_PIX_FMT_NV12MT`` is similar to ``V4L2_PIX_FMT_NV12M`` but stores +pixels in 2D 64x32 tiles, and stores 2x2 groups of tiles in +Z-order in memory, alternating Z and mirrored Z shapes horizontally. +The line stride must be a multiple of 128 pixels to ensure an +integer number of Z shapes. The image height must be a multiple of 32 pixels. +If the vertical resolution is an odd number of tiles, the last row of +tiles is stored in linear order. The layouts of the luma and chroma +planes are identical. + +``V4L2_PIX_FMT_NV12_4L4`` stores pixel in 4x4 tiles, and stores +tiles linearly in memory. The line stride and image height must be +aligned to a multiple of 4. The layouts of the luma and chroma planes are +identical. -``V4L2_PIX_FMT_NV12MT_16X16`` stores pixel in 2D 16x16 macroblocks, and stores -macroblocks linearly in memory. The line stride and image height must be +``V4L2_PIX_FMT_NV12_16L16`` stores pixel in 16x16 tiles, and stores +tiles linearly in memory. The line stride and image height must be aligned to a multiple of 16. The layouts of the luma and chroma planes are identical. -``V4L2_PIX_FMT_NV12MT`` stores pixels in 2D 64x32 macroblocks, and stores 2x2 -groups of macroblocks in Z-order in memory, alternating Z and mirrored Z shapes -horizontally. The line stride must be a multiple of 128 pixels to ensure an -integer number of Z shapes. The image height must be a multiple of 32 pixels. -If the vertical resolution is an odd number of macroblocks, the last row of -macroblocks is stored in linear order. The layouts of the luma and chroma -planes are identical. +``V4L2_PIX_FMT_NV12_32L32`` stores pixel in 32x32 tiles, and stores +tiles linearly in memory. The line stride and image height must be +aligned to a multiple of 32. The layouts of the luma and chroma planes are +identical. .. _nv12mt: @@ -290,7 +310,7 @@ planes are identical. :alt: nv12mt_example.svg :align: center - Example V4L2_PIX_FMT_NV12MT memory layout of macroblocks + Example V4L2_PIX_FMT_NV12MT memory layout of tiles .. _V4L2-PIX-FMT-NV16: diff --git a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst index f98f18c9e91c..a048a9f6b7b6 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst @@ -113,7 +113,12 @@ than the number requested. ``V4L2_MEMORY_MMAP`` and ``format.type`` to the buffer type. * - __u32 - - ``reserved``\ [7] + - ``flags`` + - Specifies additional buffer management attributes. + See :ref:`memory-flags`. + + * - __u32 + - ``reserved``\ [6] - A place holder for future extensions. Drivers and applications must set the array to zero. diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst index 80e8c63d530f..fd09677f64f8 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst @@ -95,3 +95,6 @@ EBUSY EACCES Attempt to set a read-only control or to get a write-only control. + + Or if there is an attempt to set an inactive control and the driver is + not capable of caching the new value until the control is active again. diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst index 2d6bc8d94380..fdde0ae6d521 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst @@ -470,3 +470,6 @@ EACCES Or the ``which`` field was set to ``V4L2_CTRL_WHICH_REQUEST_VAL`` but the device does not support requests. + + Or if there is an attempt to set an inactive control and the driver is + not capable of caching the new value until the control is active again. diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst index f9ecf6276129..2f491c17dd5d 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst @@ -495,6 +495,12 @@ See also the examples in :ref:`control`. - n/a - A struct :c:type:`v4l2_ctrl_hevc_slice_params`, containing HEVC slice parameters for stateless video decoders. + * - ``V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX`` + - n/a + - n/a + - n/a + - A struct :c:type:`v4l2_ctrl_hevc_scaling_matrix`, containing HEVC + scaling matrix for stateless video decoders. * - ``V4L2_CTRL_TYPE_VP8_FRAME`` - n/a - n/a diff --git a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst index 50ea72043bb0..099fa6695167 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst @@ -104,10 +104,13 @@ aborting or finishing any DMA in progress, an implicit ``V4L2_MEMORY_MMAP`` and ``type`` set to the buffer type. This will free any previously allocated buffers, so this is typically something that will be done at the start of the application. - * - __u32 - - ``reserved``\ [1] - - A place holder for future extensions. Drivers and applications - must set the array to zero. + * - __u8 + - ``flags`` + - Specifies additional buffer management attributes. + See :ref:`memory-flags`. + * - __u8 + - ``reserved``\ [3] + - Reserved for future extensions. .. _v4l2-buf-capabilities: .. _V4L2-BUF-CAP-SUPPORTS-MMAP: @@ -158,8 +161,9 @@ aborting or finishing any DMA in progress, an implicit - This capability is set by the driver to indicate that the queue supports cache and memory management hints. However, it's only valid when the queue is used for :ref:`memory mapping <mmap>` streaming I/O. See - :ref:`V4L2_BUF_FLAG_NO_CACHE_INVALIDATE <V4L2-BUF-FLAG-NO-CACHE-INVALIDATE>` and - :ref:`V4L2_BUF_FLAG_NO_CACHE_CLEAN <V4L2-BUF-FLAG-NO-CACHE-CLEAN>`. + :ref:`V4L2_BUF_FLAG_NO_CACHE_INVALIDATE <V4L2-BUF-FLAG-NO-CACHE-INVALIDATE>`, + :ref:`V4L2_BUF_FLAG_NO_CACHE_CLEAN <V4L2-BUF-FLAG-NO-CACHE-CLEAN>` and + :ref:`V4L2_MEMORY_FLAG_NON_COHERENT <V4L2-MEMORY-FLAG-NON-COHERENT>`. .. raw:: latex diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions index 2217b56c2686..eb0b1cd37abd 100644 --- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions +++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions @@ -187,6 +187,8 @@ replace define V4L2_CAP_IO_MC device-capabilities # V4L2 pix flags replace define V4L2_PIX_FMT_PRIV_MAGIC :c:type:`v4l2_pix_format` replace define V4L2_PIX_FMT_FLAG_PREMUL_ALPHA format-flags +replace define V4L2_PIX_FMT_HM12 :c:type:`v4l2_pix_format` +replace define V4L2_PIX_FMT_SUNXI_TILED_NV12 :c:type:`v4l2_pix_format` # V4L2 format flags replace define V4L2_FMT_FLAG_COMPRESSED fmtdesc-flags |