summaryrefslogtreecommitdiff
path: root/Documentation/virt/kvm/devices/arm-vgic-its.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/virt/kvm/devices/arm-vgic-its.rst')
-rw-r--r--Documentation/virt/kvm/devices/arm-vgic-its.rst209
1 files changed, 209 insertions, 0 deletions
diff --git a/Documentation/virt/kvm/devices/arm-vgic-its.rst b/Documentation/virt/kvm/devices/arm-vgic-its.rst
new file mode 100644
index 000000000000..6c304fd2b1b4
--- /dev/null
+++ b/Documentation/virt/kvm/devices/arm-vgic-its.rst
@@ -0,0 +1,209 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================
+ARM Virtual Interrupt Translation Service (ITS)
+===============================================
+
+Device types supported:
+ KVM_DEV_TYPE_ARM_VGIC_ITS ARM Interrupt Translation Service Controller
+
+The ITS allows MSI(-X) interrupts to be injected into guests. This extension is
+optional. Creating a virtual ITS controller also requires a host GICv3 (see
+arm-vgic-v3.txt), but does not depend on having physical ITS controllers.
+
+There can be multiple ITS controllers per guest, each of them has to have
+a separate, non-overlapping MMIO region.
+
+
+Groups
+======
+
+KVM_DEV_ARM_VGIC_GRP_ADDR
+-------------------------
+
+ Attributes:
+ KVM_VGIC_ITS_ADDR_TYPE (rw, 64-bit)
+ Base address in the guest physical address space of the GICv3 ITS
+ control register frame.
+ This address needs to be 64K aligned and the region covers 128K.
+
+ Errors:
+
+ ======= =================================================
+ -E2BIG Address outside of addressable IPA range
+ -EINVAL Incorrectly aligned address
+ -EEXIST Address already configured
+ -EFAULT Invalid user pointer for attr->addr.
+ -ENODEV Incorrect attribute or the ITS is not supported.
+ ======= =================================================
+
+
+KVM_DEV_ARM_VGIC_GRP_CTRL
+-------------------------
+
+ Attributes:
+ KVM_DEV_ARM_VGIC_CTRL_INIT
+ request the initialization of the ITS, no additional parameter in
+ kvm_device_attr.addr.
+
+ KVM_DEV_ARM_ITS_CTRL_RESET
+ reset the ITS, no additional parameter in kvm_device_attr.addr.
+ See "ITS Reset State" section.
+
+ KVM_DEV_ARM_ITS_SAVE_TABLES
+ save the ITS table data into guest RAM, at the location provisioned
+ by the guest in corresponding registers/table entries.
+
+ The layout of the tables in guest memory defines an ABI. The entries
+ are laid out in little endian format as described in the last paragraph.
+
+ KVM_DEV_ARM_ITS_RESTORE_TABLES
+ restore the ITS tables from guest RAM to ITS internal structures.
+
+ The GICV3 must be restored before the ITS and all ITS registers but
+ the GITS_CTLR must be restored before restoring the ITS tables.
+
+ The GITS_IIDR read-only register must also be restored before
+ calling KVM_DEV_ARM_ITS_RESTORE_TABLES as the IIDR revision field
+ encodes the ABI revision.
+
+ The expected ordering when restoring the GICv3/ITS is described in section
+ "ITS Restore Sequence".
+
+ Errors:
+
+ ======= ==========================================================
+ -ENXIO ITS not properly configured as required prior to setting
+ this attribute
+ -ENOMEM Memory shortage when allocating ITS internal data
+ -EINVAL Inconsistent restored data
+ -EFAULT Invalid guest ram access
+ -EBUSY One or more VCPUS are running
+ -EACCES The virtual ITS is backed by a physical GICv4 ITS, and the
+ state is not available
+ ======= ==========================================================
+
+KVM_DEV_ARM_VGIC_GRP_ITS_REGS
+-----------------------------
+
+ Attributes:
+ The attr field of kvm_device_attr encodes the offset of the
+ ITS register, relative to the ITS control frame base address
+ (ITS_base).
+
+ kvm_device_attr.addr points to a __u64 value whatever the width
+ of the addressed register (32/64 bits). 64 bit registers can only
+ be accessed with full length.
+
+ Writes to read-only registers are ignored by the kernel except for:
+
+ - GITS_CREADR. It must be restored otherwise commands in the queue
+ will be re-executed after restoring CWRITER. GITS_CREADR must be
+ restored before restoring the GITS_CTLR which is likely to enable the
+ ITS. Also it must be restored after GITS_CBASER since a write to
+ GITS_CBASER resets GITS_CREADR.
+ - GITS_IIDR. The Revision field encodes the table layout ABI revision.
+ In the future we might implement direct injection of virtual LPIs.
+ This will require an upgrade of the table layout and an evolution of
+ the ABI. GITS_IIDR must be restored before calling
+ KVM_DEV_ARM_ITS_RESTORE_TABLES.
+
+ For other registers, getting or setting a register has the same
+ effect as reading/writing the register on real hardware.
+
+ Errors:
+
+ ======= ====================================================
+ -ENXIO Offset does not correspond to any supported register
+ -EFAULT Invalid user pointer for attr->addr
+ -EINVAL Offset is not 64-bit aligned
+ -EBUSY one or more VCPUS are running
+ ======= ====================================================
+
+ITS Restore Sequence:
+---------------------
+
+The following ordering must be followed when restoring the GIC and the ITS:
+
+a) restore all guest memory and create vcpus
+b) restore all redistributors
+c) provide the ITS base address
+ (KVM_DEV_ARM_VGIC_GRP_ADDR)
+d) restore the ITS in the following order:
+
+ 1. Restore GITS_CBASER
+ 2. Restore all other ``GITS_`` registers, except GITS_CTLR!
+ 3. Load the ITS table data (KVM_DEV_ARM_ITS_RESTORE_TABLES)
+ 4. Restore GITS_CTLR
+
+Then vcpus can be started.
+
+ITS Table ABI REV0:
+-------------------
+
+ Revision 0 of the ABI only supports the features of a virtual GICv3, and does
+ not support a virtual GICv4 with support for direct injection of virtual
+ interrupts for nested hypervisors.
+
+ The device table and ITT are indexed by the DeviceID and EventID,
+ respectively. The collection table is not indexed by CollectionID, and the
+ entries in the collection are listed in no particular order.
+ All entries are 8 bytes.
+
+ Device Table Entry (DTE)::
+
+ bits: | 63| 62 ... 49 | 48 ... 5 | 4 ... 0 |
+ values: | V | next | ITT_addr | Size |
+
+ where:
+
+ - V indicates whether the entry is valid. If not, other fields
+ are not meaningful.
+ - next: equals to 0 if this entry is the last one; otherwise it
+ corresponds to the DeviceID offset to the next DTE, capped by
+ 2^14 -1.
+ - ITT_addr matches bits [51:8] of the ITT address (256 Byte aligned).
+ - Size specifies the supported number of bits for the EventID,
+ minus one
+
+ Collection Table Entry (CTE)::
+
+ bits: | 63| 62 .. 52 | 51 ... 16 | 15 ... 0 |
+ values: | V | RES0 | RDBase | ICID |
+
+ where:
+
+ - V indicates whether the entry is valid. If not, other fields are
+ not meaningful.
+ - RES0: reserved field with Should-Be-Zero-or-Preserved behavior.
+ - RDBase is the PE number (GICR_TYPER.Processor_Number semantic),
+ - ICID is the collection ID
+
+ Interrupt Translation Entry (ITE)::
+
+ bits: | 63 ... 48 | 47 ... 16 | 15 ... 0 |
+ values: | next | pINTID | ICID |
+
+ where:
+
+ - next: equals to 0 if this entry is the last one; otherwise it corresponds
+ to the EventID offset to the next ITE capped by 2^16 -1.
+ - pINTID is the physical LPI ID; if zero, it means the entry is not valid
+ and other fields are not meaningful.
+ - ICID is the collection ID
+
+ITS Reset State:
+----------------
+
+RESET returns the ITS to the same state that it was when first created and
+initialized. When the RESET command returns, the following things are
+guaranteed:
+
+- The ITS is not enabled and quiescent
+ GITS_CTLR.Enabled = 0 .Quiescent=1
+- There is no internally cached state
+- No collection or device table are used
+ GITS_BASER<n>.Valid = 0
+- GITS_CBASER = 0, GITS_CREADR = 0, GITS_CWRITER = 0
+- The ABI version is unchanged and remains the one set when the ITS
+ device was first created.