diff options
Diffstat (limited to 'Documentation')
85 files changed, 5057 insertions, 1280 deletions
diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 29aaedf33246..cd572912c593 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -25,11 +25,11 @@ Description: lsm: [[subj_user=] [subj_role=] [subj_type=] [obj_user=] [obj_role=] [obj_type=]] option: [[appraise_type=]] [template=] [permit_directio] - [appraise_flag=] + [appraise_flag=] [keyrings=] base: func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK] [FIRMWARE_CHECK] [KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK] - [KEXEC_CMDLINE] + [KEXEC_CMDLINE] [KEY_CHECK] mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND] [[^]MAY_EXEC] fsmagic:= hex value @@ -42,6 +42,9 @@ Description: appraise_flag:= [check_blacklist] Currently, blacklist check is only for files signed with appended signature. + keyrings:= list of keyrings + (eg, .builtin_trusted_keys|.ima). Only valid + when action is "measure" and func is KEY_CHECK. template:= name of a defined IMA template type (eg, ima-ng). Only valid when action is "measure". pcr:= decimal value @@ -113,3 +116,12 @@ Description: Example of appraise rule allowing modsig appended signatures: appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig|modsig + + Example of measure rule using KEY_CHECK to measure all keys: + + measure func=KEY_CHECK + + Example of measure rule using KEY_CHECK to only measure + keys added to .builtin_trusted_keys or .ima keyring: + + measure func=KEY_CHECK keyrings=.builtin_trusted_keys|.ima diff --git a/Documentation/ABI/testing/sysfs-bus-mdio b/Documentation/ABI/testing/sysfs-bus-mdio new file mode 100644 index 000000000000..da86efc7781b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-mdio @@ -0,0 +1,63 @@ +What: /sys/bus/mdio_bus/devices/.../statistics/ +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + This folder contains statistics about global and per + MDIO bus address statistics. + +What: /sys/bus/mdio_bus/devices/.../statistics/transfers +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of transfers for this MDIO bus. + +What: /sys/bus/mdio_bus/devices/.../statistics/errors +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of transfer errors for this MDIO bus. + +What: /sys/bus/mdio_bus/devices/.../statistics/writes +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of write transactions for this MDIO bus. + +What: /sys/bus/mdio_bus/devices/.../statistics/reads +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of read transactions for this MDIO bus. + +What: /sys/bus/mdio_bus/devices/.../statistics/transfers_<addr> +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of transfers for this MDIO bus address. + +What: /sys/bus/mdio_bus/devices/.../statistics/errors_<addr> +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of transfer errors for this MDIO bus address. + +What: /sys/bus/mdio_bus/devices/.../statistics/writes_<addr> +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of write transactions for this MDIO bus address. + +What: /sys/bus/mdio_bus/devices/.../statistics/reads_<addr> +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of read transactions for this MDIO bus address. diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.rst index 881353fd5bff..180958388ff9 100644 --- a/Documentation/RCU/NMI-RCU.txt +++ b/Documentation/RCU/NMI-RCU.rst @@ -1,4 +1,7 @@ +.. _NMI_rcu_doc: + Using RCU to Protect Dynamic NMI Handlers +========================================= Although RCU is usually used to protect read-mostly data structures, @@ -9,7 +12,7 @@ work in "arch/x86/oprofile/nmi_timer_int.c" and in "arch/x86/kernel/traps.c". The relevant pieces of code are listed below, each followed by a -brief explanation. +brief explanation:: static int dummy_nmi_callback(struct pt_regs *regs, int cpu) { @@ -18,12 +21,12 @@ brief explanation. The dummy_nmi_callback() function is a "dummy" NMI handler that does nothing, but returns zero, thus saying that it did nothing, allowing -the NMI handler to take the default machine-specific action. +the NMI handler to take the default machine-specific action:: static nmi_callback_t nmi_callback = dummy_nmi_callback; This nmi_callback variable is a global function pointer to the current -NMI handler. +NMI handler:: void do_nmi(struct pt_regs * regs, long error_code) { @@ -53,11 +56,12 @@ anyway. However, in practice it is a good documentation aid, particularly for anyone attempting to do something similar on Alpha or on systems with aggressive optimizing compilers. -Quick Quiz: Why might the rcu_dereference_sched() be necessary on Alpha, - given that the code referenced by the pointer is read-only? +Quick Quiz: + Why might the rcu_dereference_sched() be necessary on Alpha, given that the code referenced by the pointer is read-only? +:ref:`Answer to Quick Quiz <answer_quick_quiz_NMI>` -Back to the discussion of NMI and RCU... +Back to the discussion of NMI and RCU:: void set_nmi_callback(nmi_callback_t callback) { @@ -68,7 +72,7 @@ The set_nmi_callback() function registers an NMI handler. Note that any data that is to be used by the callback must be initialized up -before- the call to set_nmi_callback(). On architectures that do not order writes, the rcu_assign_pointer() ensures that the NMI handler sees the -initialized values. +initialized values:: void unset_nmi_callback(void) { @@ -82,7 +86,7 @@ up any data structures used by the old NMI handler until execution of it completes on all other CPUs. One way to accomplish this is via synchronize_rcu(), perhaps as -follows: +follows:: unset_nmi_callback(); synchronize_rcu(); @@ -98,24 +102,23 @@ to free up the handler's data as soon as synchronize_rcu() returns. Important note: for this to work, the architecture in question must invoke nmi_enter() and nmi_exit() on NMI entry and exit, respectively. +.. _answer_quick_quiz_NMI: -Answer to Quick Quiz - - Why might the rcu_dereference_sched() be necessary on Alpha, given - that the code referenced by the pointer is read-only? +Answer to Quick Quiz: + Why might the rcu_dereference_sched() be necessary on Alpha, given that the code referenced by the pointer is read-only? - Answer: The caller to set_nmi_callback() might well have - initialized some data that is to be used by the new NMI - handler. In this case, the rcu_dereference_sched() would - be needed, because otherwise a CPU that received an NMI - just after the new handler was set might see the pointer - to the new NMI handler, but the old pre-initialized - version of the handler's data. + The caller to set_nmi_callback() might well have + initialized some data that is to be used by the new NMI + handler. In this case, the rcu_dereference_sched() would + be needed, because otherwise a CPU that received an NMI + just after the new handler was set might see the pointer + to the new NMI handler, but the old pre-initialized + version of the handler's data. - This same sad story can happen on other CPUs when using - a compiler with aggressive pointer-value speculation - optimizations. + This same sad story can happen on other CPUs when using + a compiler with aggressive pointer-value speculation + optimizations. - More important, the rcu_dereference_sched() makes it - clear to someone reading the code that the pointer is - being protected by RCU-sched. + More important, the rcu_dereference_sched() makes it + clear to someone reading the code that the pointer is + being protected by RCU-sched. diff --git a/Documentation/RCU/arrayRCU.txt b/Documentation/RCU/arrayRCU.rst index f05a9afb2c39..4051ea3871ef 100644 --- a/Documentation/RCU/arrayRCU.txt +++ b/Documentation/RCU/arrayRCU.rst @@ -1,19 +1,21 @@ -Using RCU to Protect Read-Mostly Arrays +.. _array_rcu_doc: +Using RCU to Protect Read-Mostly Arrays +======================================= Although RCU is more commonly used to protect linked lists, it can also be used to protect arrays. Three situations are as follows: -1. Hash Tables +1. :ref:`Hash Tables <hash_tables>` -2. Static Arrays +2. :ref:`Static Arrays <static_arrays>` -3. Resizeable Arrays +3. :ref:`Resizable Arrays <resizable_arrays>` Each of these three situations involves an RCU-protected pointer to an array that is separately indexed. It might be tempting to consider use of RCU to instead protect the index into an array, however, this use -case is -not- supported. The problem with RCU-protected indexes into +case is **not** supported. The problem with RCU-protected indexes into arrays is that compilers can play way too many optimization games with integers, which means that the rules governing handling of these indexes are far more trouble than they are worth. If RCU-protected indexes into @@ -24,16 +26,20 @@ to be safely used. That aside, each of the three RCU-protected pointer situations are described in the following sections. +.. _hash_tables: Situation 1: Hash Tables +------------------------ Hash tables are often implemented as an array, where each array entry has a linked-list hash chain. Each hash chain can be protected by RCU as described in the listRCU.txt document. This approach also applies to other array-of-list situations, such as radix trees. +.. _static_arrays: Situation 2: Static Arrays +-------------------------- Static arrays, where the data (rather than a pointer to the data) is located in each array element, and where the array is never resized, @@ -41,13 +47,17 @@ have not been used with RCU. Rik van Riel recommends using seqlock in this situation, which would also have minimal read-side overhead as long as updates are rare. -Quick Quiz: Why is it so important that updates be rare when - using seqlock? +Quick Quiz: + Why is it so important that updates be rare when using seqlock? + +:ref:`Answer to Quick Quiz <answer_quick_quiz_seqlock>` +.. _resizable_arrays: -Situation 3: Resizeable Arrays +Situation 3: Resizable Arrays +------------------------------ -Use of RCU for resizeable arrays is demonstrated by the grow_ary() +Use of RCU for resizable arrays is demonstrated by the grow_ary() function formerly used by the System V IPC code. The array is used to map from semaphore, message-queue, and shared-memory IDs to the data structure that represents the corresponding IPC construct. The grow_ary() @@ -60,7 +70,7 @@ the remainder of the new, updates the ids->entries pointer to point to the new array, and invokes ipc_rcu_putref() to free up the old array. Note that rcu_assign_pointer() is used to update the ids->entries pointer, which includes any memory barriers required on whatever architecture -you are running on. +you are running on:: static int grow_ary(struct ipc_ids* ids, int newsize) { @@ -112,7 +122,7 @@ a simple check suffices. The pointer to the structure corresponding to the desired IPC object is placed in "out", with NULL indicating a non-existent entry. After acquiring "out->lock", the "out->deleted" flag indicates whether the IPC object is in the process of being -deleted, and, if not, the pointer is returned. +deleted, and, if not, the pointer is returned:: struct kern_ipc_perm* ipc_lock(struct ipc_ids* ids, int id) { @@ -144,8 +154,10 @@ deleted, and, if not, the pointer is returned. return out; } +.. _answer_quick_quiz_seqlock: Answer to Quick Quiz: + Why is it so important that updates be rare when using seqlock? The reason that it is important that updates be rare when using seqlock is that frequent updates can livelock readers. diff --git a/Documentation/RCU/index.rst b/Documentation/RCU/index.rst index 5c99185710fa..81a0a1e5f767 100644 --- a/Documentation/RCU/index.rst +++ b/Documentation/RCU/index.rst @@ -7,8 +7,13 @@ RCU concepts .. toctree:: :maxdepth: 3 + arrayRCU + rcubarrier + rcu_dereference + whatisRCU rcu listRCU + NMI-RCU UP Design/Memory-Ordering/Tree-RCU-Memory-Ordering diff --git a/Documentation/RCU/lockdep-splat.txt b/Documentation/RCU/lockdep-splat.txt index 9c015976b174..b8096316fd11 100644 --- a/Documentation/RCU/lockdep-splat.txt +++ b/Documentation/RCU/lockdep-splat.txt @@ -99,7 +99,7 @@ With this change, the rcu_dereference() is always within an RCU read-side critical section, which again would have suppressed the above lockdep-RCU splat. -But in this particular case, we don't actually deference the pointer +But in this particular case, we don't actually dereference the pointer returned from rcu_dereference(). Instead, that pointer is just compared to the cic pointer, which means that the rcu_dereference() can be replaced by rcu_access_pointer() as follows: diff --git a/Documentation/RCU/rcu_dereference.txt b/Documentation/RCU/rcu_dereference.rst index bf699e8cfc75..c9667eb0d444 100644 --- a/Documentation/RCU/rcu_dereference.txt +++ b/Documentation/RCU/rcu_dereference.rst @@ -1,4 +1,7 @@ +.. _rcu_dereference_doc: + PROPER CARE AND FEEDING OF RETURN VALUES FROM rcu_dereference() +=============================================================== Most of the time, you can use values from rcu_dereference() or one of the similar primitives without worries. Dereferencing (prefix "*"), @@ -8,7 +11,7 @@ subtraction of constants, and casts all work quite naturally and safely. It is nevertheless possible to get into trouble with other operations. Follow these rules to keep your RCU code working properly: -o You must use one of the rcu_dereference() family of primitives +- You must use one of the rcu_dereference() family of primitives to load an RCU-protected pointer, otherwise CONFIG_PROVE_RCU will complain. Worse yet, your code can see random memory-corruption bugs due to games that compilers and DEC Alpha can play. @@ -25,24 +28,24 @@ o You must use one of the rcu_dereference() family of primitives for an example where the compiler can in fact deduce the exact value of the pointer, and thus cause misordering. -o You are only permitted to use rcu_dereference on pointer values. +- You are only permitted to use rcu_dereference on pointer values. The compiler simply knows too much about integral values to trust it to carry dependencies through integer operations. There are a very few exceptions, namely that you can temporarily cast the pointer to uintptr_t in order to: - o Set bits and clear bits down in the must-be-zero low-order + - Set bits and clear bits down in the must-be-zero low-order bits of that pointer. This clearly means that the pointer must have alignment constraints, for example, this does -not- work in general for char* pointers. - o XOR bits to translate pointers, as is done in some + - XOR bits to translate pointers, as is done in some classic buddy-allocator algorithms. It is important to cast the value back to pointer before doing much of anything else with it. -o Avoid cancellation when using the "+" and "-" infix arithmetic +- Avoid cancellation when using the "+" and "-" infix arithmetic operators. For example, for a given variable "x", avoid "(x-(uintptr_t)x)" for char* pointers. The compiler is within its rights to substitute zero for this sort of expression, so that @@ -54,16 +57,16 @@ o Avoid cancellation when using the "+" and "-" infix arithmetic "p+a-b" is safe because its value still necessarily depends on the rcu_dereference(), thus maintaining proper ordering. -o If you are using RCU to protect JITed functions, so that the +- If you are using RCU to protect JITed functions, so that the "()" function-invocation operator is applied to a value obtained (directly or indirectly) from rcu_dereference(), you may need to interact directly with the hardware to flush instruction caches. This issue arises on some systems when a newly JITed function is using the same memory that was used by an earlier JITed function. -o Do not use the results from relational operators ("==", "!=", +- Do not use the results from relational operators ("==", "!=", ">", ">=", "<", or "<=") when dereferencing. For example, - the following (quite strange) code is buggy: + the following (quite strange) code is buggy:: int *p; int *q; @@ -81,11 +84,11 @@ o Do not use the results from relational operators ("==", "!=", after such branches, but can speculate loads, which can again result in misordering bugs. -o Be very careful about comparing pointers obtained from +- Be very careful about comparing pointers obtained from rcu_dereference() against non-NULL values. As Linus Torvalds explained, if the two pointers are equal, the compiler could substitute the pointer you are comparing against for the pointer - obtained from rcu_dereference(). For example: + obtained from rcu_dereference(). For example:: p = rcu_dereference(gp); if (p == &default_struct) @@ -93,7 +96,7 @@ o Be very careful about comparing pointers obtained from Because the compiler now knows that the value of "p" is exactly the address of the variable "default_struct", it is free to - transform this code into the following: + transform this code into the following:: p = rcu_dereference(gp); if (p == &default_struct) @@ -105,14 +108,14 @@ o Be very careful about comparing pointers obtained from However, comparisons are OK in the following cases: - o The comparison was against the NULL pointer. If the + - The comparison was against the NULL pointer. If the compiler knows that the pointer is NULL, you had better not be dereferencing it anyway. If the comparison is non-equal, the compiler is none the wiser. Therefore, it is safe to compare pointers from rcu_dereference() against NULL pointers. - o The pointer is never dereferenced after being compared. + - The pointer is never dereferenced after being compared. Since there are no subsequent dereferences, the compiler cannot use anything it learned from the comparison to reorder the non-existent subsequent dereferences. @@ -124,31 +127,31 @@ o Be very careful about comparing pointers obtained from dereferenced, rcu_access_pointer() should be used in place of rcu_dereference(). - o The comparison is against a pointer that references memory + - The comparison is against a pointer that references memory that was initialized "a long time ago." The reason this is safe is that even if misordering occurs, the misordering will not affect the accesses that follow the comparison. So exactly how long ago is "a long time ago"? Here are some possibilities: - o Compile time. + - Compile time. - o Boot time. + - Boot time. - o Module-init time for module code. + - Module-init time for module code. - o Prior to kthread creation for kthread code. + - Prior to kthread creation for kthread code. - o During some prior acquisition of the lock that + - During some prior acquisition of the lock that we now hold. - o Before mod_timer() time for a timer handler. + - Before mod_timer() time for a timer handler. There are many other possibilities involving the Linux kernel's wide array of primitives that cause code to be invoked at a later time. - o The pointer being compared against also came from + - The pointer being compared against also came from rcu_dereference(). In this case, both pointers depend on one rcu_dereference() or another, so you get proper ordering either way. @@ -159,13 +162,13 @@ o Be very careful about comparing pointers obtained from of such an RCU usage bug is shown in the section titled "EXAMPLE OF AMPLIFIED RCU-USAGE BUG". - o All of the accesses following the comparison are stores, + - All of the accesses following the comparison are stores, so that a control dependency preserves the needed ordering. That said, it is easy to get control dependencies wrong. Please see the "CONTROL DEPENDENCIES" section of Documentation/memory-barriers.txt for more details. - o The pointers are not equal -and- the compiler does + - The pointers are not equal -and- the compiler does not have enough information to deduce the value of the pointer. Note that the volatile cast in rcu_dereference() will normally prevent the compiler from knowing too much. @@ -175,7 +178,7 @@ o Be very careful about comparing pointers obtained from comparison will provide exactly the information that the compiler needs to deduce the value of the pointer. -o Disable any value-speculation optimizations that your compiler +- Disable any value-speculation optimizations that your compiler might provide, especially if you are making use of feedback-based optimizations that take data collected from prior runs. Such value-speculation optimizations reorder operations by design. @@ -188,11 +191,12 @@ o Disable any value-speculation optimizations that your compiler EXAMPLE OF AMPLIFIED RCU-USAGE BUG +---------------------------------- Because updaters can run concurrently with RCU readers, RCU readers can see stale and/or inconsistent values. If RCU readers need fresh or consistent values, which they sometimes do, they need to take proper -precautions. To see this, consider the following code fragment: +precautions. To see this, consider the following code fragment:: struct foo { int a; @@ -244,7 +248,7 @@ to some reordering from the compiler and CPUs is beside the point. But suppose that the reader needs a consistent view? -Then one approach is to use locking, for example, as follows: +Then one approach is to use locking, for example, as follows:: struct foo { int a; @@ -299,6 +303,7 @@ As always, use the right tool for the job! EXAMPLE WHERE THE COMPILER KNOWS TOO MUCH +----------------------------------------- If a pointer obtained from rcu_dereference() compares not-equal to some other pointer, the compiler normally has no clue what the value of the @@ -308,7 +313,7 @@ guarantees that RCU depends on. And the volatile cast in rcu_dereference() should prevent the compiler from guessing the value. But without rcu_dereference(), the compiler knows more than you might -expect. Consider the following code fragment: +expect. Consider the following code fragment:: struct foo { int a; @@ -354,6 +359,7 @@ dereference the resulting pointer. WHICH MEMBER OF THE rcu_dereference() FAMILY SHOULD YOU USE? +------------------------------------------------------------ First, please avoid using rcu_dereference_raw() and also please avoid using rcu_dereference_check() and rcu_dereference_protected() with a @@ -370,7 +376,7 @@ member of the rcu_dereference() to use in various situations: 2. If the access might be within an RCU read-side critical section on the one hand, or protected by (say) my_lock on the other, - use rcu_dereference_check(), for example: + use rcu_dereference_check(), for example:: p1 = rcu_dereference_check(p->rcu_protected_pointer, lockdep_is_held(&my_lock)); @@ -378,14 +384,14 @@ member of the rcu_dereference() to use in various situations: 3. If the access might be within an RCU read-side critical section on the one hand, or protected by either my_lock or your_lock on - the other, again use rcu_dereference_check(), for example: + the other, again use rcu_dereference_check(), for example:: p1 = rcu_dereference_check(p->rcu_protected_pointer, lockdep_is_held(&my_lock) || lockdep_is_held(&your_lock)); 4. If the access is on the update side, so that it is always protected - by my_lock, use rcu_dereference_protected(): + by my_lock, use rcu_dereference_protected():: p1 = rcu_dereference_protected(p->rcu_protected_pointer, lockdep_is_held(&my_lock)); @@ -410,18 +416,19 @@ member of the rcu_dereference() to use in various situations: SPARSE CHECKING OF RCU-PROTECTED POINTERS +----------------------------------------- The sparse static-analysis tool checks for direct access to RCU-protected pointers, which can result in "interesting" bugs due to compiler optimizations involving invented loads and perhaps also load tearing. -For example, suppose someone mistakenly does something like this: +For example, suppose someone mistakenly does something like this:: p = q->rcu_protected_pointer; do_something_with(p->a); do_something_else_with(p->b); If register pressure is high, the compiler might optimize "p" out -of existence, transforming the code to something like this: +of existence, transforming the code to something like this:: do_something_with(q->rcu_protected_pointer->a); do_something_else_with(q->rcu_protected_pointer->b); @@ -435,7 +442,7 @@ Load tearing could of course result in dereferencing a mashup of a pair of pointers, which also might fatally disappoint your code. These problems could have been avoided simply by making the code instead -read as follows: +read as follows:: p = rcu_dereference(q->rcu_protected_pointer); do_something_with(p->a); @@ -448,7 +455,7 @@ or as a formal parameter, with "__rcu", which tells sparse to complain if this pointer is accessed directly. It will also cause sparse to complain if a pointer not marked with "__rcu" is accessed using rcu_dereference() and friends. For example, ->rcu_protected_pointer might be declared as -follows: +follows:: struct foo __rcu *rcu_protected_pointer; diff --git a/Documentation/RCU/rcubarrier.txt b/Documentation/RCU/rcubarrier.rst index a2782df69732..f64f4413a47c 100644 --- a/Documentation/RCU/rcubarrier.txt +++ b/Documentation/RCU/rcubarrier.rst @@ -1,4 +1,7 @@ +.. _rcu_barrier: + RCU and Unloadable Modules +========================== [Originally published in LWN Jan. 14, 2007: http://lwn.net/Articles/217484/] @@ -21,7 +24,7 @@ given that readers might well leave absolutely no trace of their presence? There is a synchronize_rcu() primitive that blocks until all pre-existing readers have completed. An updater wishing to delete an element p from a linked list might do the following, while holding an -appropriate lock, of course: +appropriate lock, of course:: list_del_rcu(p); synchronize_rcu(); @@ -32,13 +35,13 @@ primitive must be used instead. This primitive takes a pointer to an rcu_head struct placed within the RCU-protected data structure and another pointer to a function that may be invoked later to free that structure. Code to delete an element p from the linked list from IRQ -context might then be as follows: +context might then be as follows:: list_del_rcu(p); call_rcu(&p->rcu, p_callback); Since call_rcu() never blocks, this code can safely be used from within -IRQ context. The function p_callback() might be defined as follows: +IRQ context. The function p_callback() might be defined as follows:: static void p_callback(struct rcu_head *rp) { @@ -49,6 +52,7 @@ IRQ context. The function p_callback() might be defined as follows: Unloading Modules That Use call_rcu() +------------------------------------- But what if p_callback is defined in an unloadable module? @@ -69,10 +73,11 @@ in realtime kernels in order to avoid excessive scheduling latencies. rcu_barrier() +------------- We instead need the rcu_barrier() primitive. Rather than waiting for a grace period to elapse, rcu_barrier() waits for all outstanding RCU -callbacks to complete. Please note that rcu_barrier() does -not- imply +callbacks to complete. Please note that rcu_barrier() does **not** imply synchronize_rcu(), in particular, if there are no RCU callbacks queued anywhere, rcu_barrier() is within its rights to return immediately, without waiting for a grace period to elapse. @@ -88,79 +93,79 @@ must match the flavor of rcu_barrier() with that of call_rcu(). If your module uses multiple flavors of call_rcu(), then it must also use multiple flavors of rcu_barrier() when unloading that module. For example, if it uses call_rcu(), call_srcu() on srcu_struct_1, and call_srcu() on -srcu_struct_2(), then the following three lines of code will be required -when unloading: +srcu_struct_2, then the following three lines of code will be required +when unloading:: 1 rcu_barrier(); 2 srcu_barrier(&srcu_struct_1); 3 srcu_barrier(&srcu_struct_2); The rcutorture module makes use of rcu_barrier() in its exit function -as follows: +as follows:: - 1 static void - 2 rcu_torture_cleanup(void) - 3 { - 4 int i; + 1 static void + 2 rcu_torture_cleanup(void) + 3 { + 4 int i; 5 - 6 fullstop = 1; - 7 if (shuffler_task != NULL) { + 6 fullstop = 1; + 7 if (shuffler_task != NULL) { 8 VERBOSE_PRINTK_STRING("Stopping rcu_torture_shuffle task"); 9 kthread_stop(shuffler_task); -10 } -11 shuffler_task = NULL; -12 -13 if (writer_task != NULL) { -14 VERBOSE_PRINTK_STRING("Stopping rcu_torture_writer task"); -15 kthread_stop(writer_task); -16 } -17 writer_task = NULL; -18 -19 if (reader_tasks != NULL) { -20 for (i = 0; i < nrealreaders; i++) { -21 if (reader_tasks[i] != NULL) { -22 VERBOSE_PRINTK_STRING( -23 "Stopping rcu_torture_reader task"); -24 kthread_stop(reader_tasks[i]); -25 } -26 reader_tasks[i] = NULL; -27 } -28 kfree(reader_tasks); -29 reader_tasks = NULL; -30 } -31 rcu_torture_current = NULL; -32 -33 if (fakewriter_tasks != NULL) { -34 for (i = 0; i < nfakewriters; i++) { -35 if (fakewriter_tasks[i] != NULL) { -36 VERBOSE_PRINTK_STRING( -37 "Stopping rcu_torture_fakewriter task"); -38 kthread_stop(fakewriter_tasks[i]); -39 } -40 fakewriter_tasks[i] = NULL; -41 } -42 kfree(fakewriter_tasks); -43 fakewriter_tasks = NULL; -44 } -45 -46 if (stats_task != NULL) { -47 VERBOSE_PRINTK_STRING("Stopping rcu_torture_stats task"); -48 kthread_stop(stats_task); -49 } -50 stats_task = NULL; -51 -52 /* Wait for all RCU callbacks to fire. */ -53 rcu_barrier(); -54 -55 rcu_torture_stats_print(); /* -After- the stats thread is stopped! */ -56 -57 if (cur_ops->cleanup != NULL) -58 cur_ops->cleanup(); -59 if (atomic_read(&n_rcu_torture_error)) -60 rcu_torture_print_module_parms("End of test: FAILURE"); -61 else -62 rcu_torture_print_module_parms("End of test: SUCCESS"); -63 } + 10 } + 11 shuffler_task = NULL; + 12 + 13 if (writer_task != NULL) { + 14 VERBOSE_PRINTK_STRING("Stopping rcu_torture_writer task"); + 15 kthread_stop(writer_task); + 16 } + 17 writer_task = NULL; + 18 + 19 if (reader_tasks != NULL) { + 20 for (i = 0; i < nrealreaders; i++) { + 21 if (reader_tasks[i] != NULL) { + 22 VERBOSE_PRINTK_STRING( + 23 "Stopping rcu_torture_reader task"); + 24 kthread_stop(reader_tasks[i]); + 25 } + 26 reader_tasks[i] = NULL; + 27 } + 28 kfree(reader_tasks); + 29 reader_tasks = NULL; + 30 } + 31 rcu_torture_current = NULL; + 32 + 33 if (fakewriter_tasks != NULL) { + 34 for (i = 0; i < nfakewriters; i++) { + 35 if (fakewriter_tasks[i] != NULL) { + 36 VERBOSE_PRINTK_STRING( + 37 "Stopping rcu_torture_fakewriter task"); + 38 kthread_stop(fakewriter_tasks[i]); + 39 } + 40 fakewriter_tasks[i] = NULL; + 41 } + 42 kfree(fakewriter_tasks); + 43 fakewriter_tasks = NULL; + 44 } + 45 + 46 if (stats_task != NULL) { + 47 VERBOSE_PRINTK_STRING("Stopping rcu_torture_stats task"); + 48 kthread_stop(stats_task); + 49 } + 50 stats_task = NULL; + 51 + 52 /* Wait for all RCU callbacks to fire. */ + 53 rcu_barrier(); + 54 + 55 rcu_torture_stats_print(); /* -After- the stats thread is stopped! */ + 56 + 57 if (cur_ops->cleanup != NULL) + 58 cur_ops->cleanup(); + 59 if (atomic_read(&n_rcu_torture_error)) + 60 rcu_torture_print_module_parms("End of test: FAILURE"); + 61 else + 62 rcu_torture_print_module_parms("End of test: SUCCESS"); + 63 } Line 6 sets a global variable that prevents any RCU callbacks from re-posting themselves. This will not be necessary in most cases, since @@ -176,9 +181,14 @@ for any pre-existing callbacks to complete. Then lines 55-62 print status and do operation-specific cleanup, and then return, permitting the module-unload operation to be completed. -Quick Quiz #1: Is there any other situation where rcu_barrier() might +.. _rcubarrier_quiz_1: + +Quick Quiz #1: + Is there any other situation where rcu_barrier() might be required? +:ref:`Answer to Quick Quiz #1 <answer_rcubarrier_quiz_1>` + Your module might have additional complications. For example, if your module invokes call_rcu() from timers, you will need to first cancel all the timers, and only then invoke rcu_barrier() to wait for any remaining @@ -188,11 +198,12 @@ Of course, if you module uses call_rcu(), you will need to invoke rcu_barrier() before unloading. Similarly, if your module uses call_srcu(), you will need to invoke srcu_barrier() before unloading, and on the same srcu_struct structure. If your module uses call_rcu() --and- call_srcu(), then you will need to invoke rcu_barrier() -and- +**and** call_srcu(), then you will need to invoke rcu_barrier() **and** srcu_barrier(). Implementing rcu_barrier() +-------------------------- Dipankar Sarma's implementation of rcu_barrier() makes use of the fact that RCU callbacks are never reordered once queued on one of the per-CPU @@ -200,19 +211,19 @@ queues. His implementation queues an RCU callback on each of the per-CPU callback queues, and then waits until they have all started executing, at which point, all earlier RCU callbacks are guaranteed to have completed. -The original code for rcu_barrier() was as follows: +The original code for rcu_barrier() was as follows:: - 1 void rcu_barrier(void) - 2 { - 3 BUG_ON(in_interrupt()); - 4 /* Take cpucontrol mutex to protect against CPU hotplug */ - 5 mutex_lock(&rcu_barrier_mutex); - 6 init_completion(&rcu_barrier_completion); - 7 atomic_set(&rcu_barrier_cpu_count, 0); - 8 on_each_cpu(rcu_barrier_func, NULL, 0, 1); - 9 wait_for_completion(&rcu_barrier_completion); -10 mutex_unlock(&rcu_barrier_mutex); -11 } + 1 void rcu_barrier(void) + 2 { + 3 BUG_ON(in_interrupt()); + 4 /* Take cpucontrol mutex to protect against CPU hotplug */ + 5 mutex_lock(&rcu_barrier_mutex); + 6 init_completion(&rcu_barrier_completion); + 7 atomic_set(&rcu_barrier_cpu_count, 0); + 8 on_each_cpu(rcu_barrier_func, NULL, 0, 1); + 9 wait_for_completion(&rcu_barrier_completion); + 10 mutex_unlock(&rcu_barrier_mutex); + 11 } Line 3 verifies that the caller is in process context, and lines 5 and 10 use rcu_barrier_mutex to ensure that only one rcu_barrier() is using the @@ -226,18 +237,18 @@ This code was rewritten in 2008 and several times thereafter, but this still gives the general idea. The rcu_barrier_func() runs on each CPU, where it invokes call_rcu() -to post an RCU callback, as follows: +to post an RCU callback, as follows:: - 1 static void rcu_barrier_func(void *notused) - 2 { - 3 int cpu = smp_processor_id(); - 4 struct rcu_data *rdp = &per_cpu(rcu_data, cpu); - 5 struct rcu_head *head; + 1 static void rcu_barrier_func(void *notused) + 2 { + 3 int cpu = smp_processor_id(); + 4 struct rcu_data *rdp = &per_cpu(rcu_data, cpu); + 5 struct rcu_head *head; 6 - 7 head = &rdp->barrier; - 8 atomic_inc(&rcu_barrier_cpu_count); - 9 call_rcu(head, rcu_barrier_callback); -10 } + 7 head = &rdp->barrier; + 8 atomic_inc(&rcu_barrier_cpu_count); + 9 call_rcu(head, rcu_barrier_callback); + 10 } Lines 3 and 4 locate RCU's internal per-CPU rcu_data structure, which contains the struct rcu_head that needed for the later call to @@ -248,20 +259,25 @@ the current CPU's queue. The rcu_barrier_callback() function simply atomically decrements the rcu_barrier_cpu_count variable and finalizes the completion when it -reaches zero, as follows: +reaches zero, as follows:: 1 static void rcu_barrier_callback(struct rcu_head *notused) 2 { - 3 if (atomic_dec_and_test(&rcu_barrier_cpu_count)) - 4 complete(&rcu_barrier_completion); + 3 if (atomic_dec_and_test(&rcu_barrier_cpu_count)) + 4 complete(&rcu_barrier_completion); 5 } -Quick Quiz #2: What happens if CPU 0's rcu_barrier_func() executes +.. _rcubarrier_quiz_2: + +Quick Quiz #2: + What happens if CPU 0's rcu_barrier_func() executes immediately (thus incrementing rcu_barrier_cpu_count to the value one), but the other CPU's rcu_barrier_func() invocations are delayed for a full grace period? Couldn't this result in rcu_barrier() returning prematurely? +:ref:`Answer to Quick Quiz #2 <answer_rcubarrier_quiz_2>` + The current rcu_barrier() implementation is more complex, due to the need to avoid disturbing idle CPUs (especially on battery-powered systems) and the need to minimally disturb non-idle CPUs in real-time systems. @@ -269,6 +285,7 @@ However, the code above illustrates the concepts. rcu_barrier() Summary +--------------------- The rcu_barrier() primitive has seen relatively little use, since most code using RCU is in the core kernel rather than in modules. However, if @@ -277,8 +294,12 @@ so that your module may be safely unloaded. Answers to Quick Quizzes +------------------------ + +.. _answer_rcubarrier_quiz_1: -Quick Quiz #1: Is there any other situation where rcu_barrier() might +Quick Quiz #1: + Is there any other situation where rcu_barrier() might be required? Answer: Interestingly enough, rcu_barrier() was not originally @@ -292,7 +313,12 @@ Answer: Interestingly enough, rcu_barrier() was not originally implementing rcutorture, and found that rcu_barrier() solves this problem as well. -Quick Quiz #2: What happens if CPU 0's rcu_barrier_func() executes +:ref:`Back to Quick Quiz #1 <rcubarrier_quiz_1>` + +.. _answer_rcubarrier_quiz_2: + +Quick Quiz #2: + What happens if CPU 0's rcu_barrier_func() executes immediately (thus incrementing rcu_barrier_cpu_count to the value one), but the other CPU's rcu_barrier_func() invocations are delayed for a full grace period? Couldn't this result in @@ -323,3 +349,5 @@ Answer: This cannot happen. The reason is that on_each_cpu() has its last is to add an rcu_read_lock() before line 8 of rcu_barrier() and an rcu_read_unlock() after line 8 of this same function. If you can think of a better change, please let me know! + +:ref:`Back to Quick Quiz #2 <rcubarrier_quiz_2>` diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt index f48f4621ccbc..a360a8796710 100644 --- a/Documentation/RCU/stallwarn.txt +++ b/Documentation/RCU/stallwarn.txt @@ -225,18 +225,13 @@ an estimate of the total number of RCU callbacks queued across all CPUs In kernels with CONFIG_RCU_FAST_NO_HZ, more information is printed for each CPU: - 0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 Nonlazy posted: ..D + 0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 dyntick_enabled: 1 The "last_accelerate:" prints the low-order 16 bits (in hex) of the jiffies counter when this CPU last invoked rcu_try_advance_all_cbs() from rcu_needs_cpu() or last invoked rcu_accelerate_cbs() from -rcu_prepare_for_idle(). The "Nonlazy posted:" indicates lazy-callback -status, so that an "l" indicates that all callbacks were lazy at the start -of the last idle period and an "L" indicates that there are currently -no non-lazy callbacks (in both cases, "." is printed otherwise, as -shown above) and "D" indicates that dyntick-idle processing is enabled -("." is printed otherwise, for example, if disabled via the "nohz=" -kernel boot parameter). +rcu_prepare_for_idle(). "dyntick_enabled: 1" indicates that dyntick-idle +processing is enabled. If the grace period ends just as the stall warning starts printing, there will be a spurious stall-warning message, which will include diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.rst index 58ba05c4d97f..c7f147b8034f 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.rst @@ -1,15 +1,18 @@ +.. _whatisrcu_doc: + What is RCU? -- "Read, Copy, Update" +====================================== Please note that the "What is RCU?" LWN series is an excellent place to start learning about RCU: -1. What is RCU, Fundamentally? http://lwn.net/Articles/262464/ -2. What is RCU? Part 2: Usage http://lwn.net/Articles/263130/ -3. RCU part 3: the RCU API http://lwn.net/Articles/264090/ -4. The RCU API, 2010 Edition http://lwn.net/Articles/418853/ - 2010 Big API Table http://lwn.net/Articles/419086/ -5. The RCU API, 2014 Edition http://lwn.net/Articles/609904/ - 2014 Big API Table http://lwn.net/Articles/609973/ +| 1. What is RCU, Fundamentally? http://lwn.net/Articles/262464/ +| 2. What is RCU? Part 2: Usage http://lwn.net/Articles/263130/ +| 3. RCU part 3: the RCU API http://lwn.net/Articles/264090/ +| 4. The RCU API, 2010 Edition http://lwn.net/Articles/418853/ +| 2010 Big API Table http://lwn.net/Articles/419086/ +| 5. The RCU API, 2014 Edition http://lwn.net/Articles/609904/ +| 2014 Big API Table http://lwn.net/Articles/609973/ What is RCU? @@ -24,14 +27,21 @@ the experience has been that different people must take different paths to arrive at an understanding of RCU. This document provides several different paths, as follows: -1. RCU OVERVIEW -2. WHAT IS RCU'S CORE API? -3. WHAT ARE SOME EXAMPLE USES OF CORE RCU API? -4. WHAT IF MY UPDATING THREAD CANNOT BLOCK? -5. WHAT ARE SOME SIMPLE IMPLEMENTATIONS OF RCU? -6. ANALOGY WITH READER-WRITER LOCKING -7. FULL LIST OF RCU APIs -8. ANSWERS TO QUICK QUIZZES +:ref:`1. RCU OVERVIEW <1_whatisRCU>` + +:ref:`2. WHAT IS RCU'S CORE API? <2_whatisRCU>` + +:ref:`3. WHAT ARE SOME EXAMPLE USES OF CORE RCU API? <3_whatisRCU>` + +:ref:`4. WHAT IF MY UPDATING THREAD CANNOT BLOCK? <4_whatisRCU>` + +:ref:`5. WHAT ARE SOME SIMPLE IMPLEMENTATIONS OF RCU? <5_whatisRCU>` + +:ref:`6. ANALOGY WITH READER-WRITER LOCKING <6_whatisRCU>` + +:ref:`7. FULL LIST OF RCU APIs <7_whatisRCU>` + +:ref:`8. ANSWERS TO QUICK QUIZZES <8_whatisRCU>` People who prefer starting with a conceptual overview should focus on Section 1, though most readers will profit by reading this section at @@ -49,8 +59,10 @@ everything, feel free to read the whole thing -- but if you are really that type of person, you have perused the source code and will therefore never need this document anyway. ;-) +.. _1_whatisRCU: 1. RCU OVERVIEW +---------------- The basic idea behind RCU is to split updates into "removal" and "reclamation" phases. The removal phase removes references to data items @@ -116,8 +128,10 @@ So how the heck can a reclaimer tell when a reader is done, given that readers are not doing any sort of synchronization operations??? Read on to learn about how RCU's API makes this easy. +.. _2_whatisRCU: 2. WHAT IS RCU'S CORE API? +--------------------------- The core RCU API is quite small: @@ -136,7 +150,7 @@ later. See the kernel docbook documentation for more info, or look directly at the function header comments. rcu_read_lock() - +^^^^^^^^^^^^^^^ void rcu_read_lock(void); Used by a reader to inform the reclaimer that the reader is @@ -150,7 +164,7 @@ rcu_read_lock() longer-term references to data structures. rcu_read_unlock() - +^^^^^^^^^^^^^^^^^ void rcu_read_unlock(void); Used by a reader to inform the reclaimer that the reader is @@ -158,15 +172,15 @@ rcu_read_unlock() read-side critical sections may be nested and/or overlapping. synchronize_rcu() - +^^^^^^^^^^^^^^^^^ void synchronize_rcu(void); Marks the end of updater code and the beginning of reclaimer code. It does this by blocking until all pre-existing RCU read-side critical sections on all CPUs have completed. - Note that synchronize_rcu() will -not- necessarily wait for + Note that synchronize_rcu() will **not** necessarily wait for any subsequent RCU read-side critical sections to complete. - For example, consider the following sequence of events: + For example, consider the following sequence of events:: CPU 0 CPU 1 CPU 2 ----------------- ------------------------- --------------- @@ -182,7 +196,7 @@ synchronize_rcu() any that begin after synchronize_rcu() is invoked. Of course, synchronize_rcu() does not necessarily return - -immediately- after the last pre-existing RCU read-side critical + **immediately** after the last pre-existing RCU read-side critical section completes. For one thing, there might well be scheduling delays. For another thing, many RCU implementations process requests in batches in order to improve efficiencies, which can @@ -211,10 +225,10 @@ synchronize_rcu() checklist.txt for some approaches to limiting the update rate. rcu_assign_pointer() - +^^^^^^^^^^^^^^^^^^^^ void rcu_assign_pointer(p, typeof(p) v); - Yes, rcu_assign_pointer() -is- implemented as a macro, though it + Yes, rcu_assign_pointer() **is** implemented as a macro, though it would be cool to be able to declare a function in this manner. (Compiler experts will no doubt disagree.) @@ -231,7 +245,7 @@ rcu_assign_pointer() the _rcu list-manipulation primitives such as list_add_rcu(). rcu_dereference() - +^^^^^^^^^^^^^^^^^ typeof(p) rcu_dereference(p); Like rcu_assign_pointer(), rcu_dereference() must be implemented @@ -248,13 +262,13 @@ rcu_dereference() Common coding practice uses rcu_dereference() to copy an RCU-protected pointer to a local variable, then dereferences - this local variable, for example as follows: + this local variable, for example as follows:: p = rcu_dereference(head.next); return p->data; However, in this case, one could just as easily combine these - into one statement: + into one statement:: return rcu_dereference(head.next)->data; @@ -266,8 +280,8 @@ rcu_dereference() unnecessary overhead on Alpha CPUs. Note that the value returned by rcu_dereference() is valid - only within the enclosing RCU read-side critical section [1]. - For example, the following is -not- legal: + only within the enclosing RCU read-side critical section [1]_. + For example, the following is **not** legal:: rcu_read_lock(); p = rcu_dereference(head.next); @@ -290,9 +304,9 @@ rcu_dereference() at any time, including immediately after the rcu_dereference(). And, again like rcu_assign_pointer(), rcu_dereference() is typically used indirectly, via the _rcu list-manipulation - primitives, such as list_for_each_entry_rcu() [2]. + primitives, such as list_for_each_entry_rcu() [2]_. - [1] The variant rcu_dereference_protected() can be used outside +.. [1] The variant rcu_dereference_protected() can be used outside of an RCU read-side critical section as long as the usage is protected by locks acquired by the update-side code. This variant avoids the lockdep warning that would happen when using (for @@ -305,7 +319,7 @@ rcu_dereference() a lockdep splat is emitted. See Documentation/RCU/Design/Requirements/Requirements.rst and the API's code comments for more details and example usage. - [2] If the list_for_each_entry_rcu() instance might be used by +.. [2] If the list_for_each_entry_rcu() instance might be used by update-side code as well as by RCU readers, then an additional lockdep expression can be added to its list of arguments. For example, given an additional "lock_is_held(&mylock)" argument, @@ -315,6 +329,7 @@ rcu_dereference() The following diagram shows how each API communicates among the reader, updater, and reclaimer. +:: rcu_assign_pointer() @@ -375,12 +390,16 @@ c. RCU applied to scheduler and interrupt/NMI-handler tasks. Again, most uses will be of (a). The (b) and (c) cases are important for specialized uses, but are relatively uncommon. +.. _3_whatisRCU: 3. WHAT ARE SOME EXAMPLE USES OF CORE RCU API? +----------------------------------------------- This section shows a simple use of the core RCU API to protect a global pointer to a dynamically allocated structure. More-typical -uses of RCU may be found in listRCU.txt, arrayRCU.txt, and NMI-RCU.txt. +uses of RCU may be found in :ref:`listRCU.rst <list_rcu_doc>`, +:ref:`arrayRCU.rst <array_rcu_doc>`, and :ref:`NMI-RCU.rst <NMI_rcu_doc>`. +:: struct foo { int a; @@ -440,40 +459,43 @@ uses of RCU may be found in listRCU.txt, arrayRCU.txt, and NMI-RCU.txt. So, to sum up: -o Use rcu_read_lock() and rcu_read_unlock() to guard RCU +- Use rcu_read_lock() and rcu_read_unlock() to guard RCU read-side critical sections. -o Within an RCU read-side critical section, use rcu_dereference() +- Within an RCU read-side critical section, use rcu_dereference() to dereference RCU-protected pointers. -o Use some solid scheme (such as locks or semaphores) to +- Use some solid scheme (such as locks or semaphores) to keep concurrent updates from interfering with each other. -o Use rcu_assign_pointer() to update an RCU-protected pointer. +- Use rcu_assign_pointer() to update an RCU-protected pointer. This primitive protects concurrent readers from the updater, - -not- concurrent updates from each other! You therefore still + **not** concurrent updates from each other! You therefore still need to use locking (or something similar) to keep concurrent rcu_assign_pointer() primitives from interfering with each other. -o Use synchronize_rcu() -after- removing a data element from an - RCU-protected data structure, but -before- reclaiming/freeing +- Use synchronize_rcu() **after** removing a data element from an + RCU-protected data structure, but **before** reclaiming/freeing the data element, in order to wait for the completion of all RCU read-side critical sections that might be referencing that data item. See checklist.txt for additional rules to follow when using RCU. -And again, more-typical uses of RCU may be found in listRCU.txt, -arrayRCU.txt, and NMI-RCU.txt. +And again, more-typical uses of RCU may be found in :ref:`listRCU.rst +<list_rcu_doc>`, :ref:`arrayRCU.rst <array_rcu_doc>`, and :ref:`NMI-RCU.rst +<NMI_rcu_doc>`. +.. _4_whatisRCU: 4. WHAT IF MY UPDATING THREAD CANNOT BLOCK? +-------------------------------------------- In the example above, foo_update_a() blocks until a grace period elapses. This is quite simple, but in some cases one cannot afford to wait so long -- there might be other high-priority work to be done. In such cases, one uses call_rcu() rather than synchronize_rcu(). -The call_rcu() API is as follows: +The call_rcu() API is as follows:: void call_rcu(struct rcu_head * head, void (*func)(struct rcu_head *head)); @@ -481,7 +503,7 @@ The call_rcu() API is as follows: This function invokes func(head) after a grace period has elapsed. This invocation might happen from either softirq or process context, so the function is not permitted to block. The foo struct needs to -have an rcu_head structure added, perhaps as follows: +have an rcu_head structure added, perhaps as follows:: struct foo { int a; @@ -490,7 +512,7 @@ have an rcu_head structure added, perhaps as follows: struct rcu_head rcu; }; -The foo_update_a() function might then be written as follows: +The foo_update_a() function might then be written as follows:: /* * Create a new struct foo that is the same as the one currently @@ -520,7 +542,7 @@ The foo_update_a() function might then be written as follows: call_rcu(&old_fp->rcu, foo_reclaim); } -The foo_reclaim() function might appear as follows: +The foo_reclaim() function might appear as follows:: void foo_reclaim(struct rcu_head *rp) { @@ -544,7 +566,7 @@ namely foo_reclaim(). The summary of advice is the same as for the previous section, except that we are now using call_rcu() rather than synchronize_rcu(): -o Use call_rcu() -after- removing a data element from an +- Use call_rcu() **after** removing a data element from an RCU-protected data structure in order to register a callback function that will be invoked after the completion of all RCU read-side critical sections that might be referencing that @@ -552,14 +574,16 @@ o Use call_rcu() -after- removing a data element from an If the callback for call_rcu() is not doing anything more than calling kfree() on the structure, you can use kfree_rcu() instead of call_rcu() -to avoid having to write your own callback: +to avoid having to write your own callback:: kfree_rcu(old_fp, rcu); Again, see checklist.txt for additional rules governing the use of RCU. +.. _5_whatisRCU: 5. WHAT ARE SOME SIMPLE IMPLEMENTATIONS OF RCU? +------------------------------------------------ One of the nice things about RCU is that it has extremely simple "toy" implementations that are a good first step towards understanding the @@ -579,7 +603,7 @@ more details on the current implementation as of early 2004. 5A. "TOY" IMPLEMENTATION #1: LOCKING - +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This section presents a "toy" RCU implementation that is based on familiar locking primitives. Its overhead makes it a non-starter for real-life use, as does its lack of scalability. It is also unsuitable @@ -591,7 +615,7 @@ you allow nested rcu_read_lock() calls, you can deadlock. However, it is probably the easiest implementation to relate to, so is a good starting point. -It is extremely simple: +It is extremely simple:: static DEFINE_RWLOCK(rcu_gp_mutex); @@ -614,7 +638,7 @@ It is extremely simple: [You can ignore rcu_assign_pointer() and rcu_dereference() without missing much. But here are simplified versions anyway. And whatever you do, -don't forget about them when submitting patches making use of RCU!] +don't forget about them when submitting patches making use of RCU!]:: #define rcu_assign_pointer(p, v) \ ({ \ @@ -647,18 +671,23 @@ that the only thing that can block rcu_read_lock() is a synchronize_rcu(). But synchronize_rcu() does not acquire any locks while holding rcu_gp_mutex, so there can be no deadlock cycle. -Quick Quiz #1: Why is this argument naive? How could a deadlock +.. _quiz_1: + +Quick Quiz #1: + Why is this argument naive? How could a deadlock occur when using this algorithm in a real-world Linux kernel? How could this deadlock be avoided? +:ref:`Answers to Quick Quiz <8_whatisRCU>` 5B. "TOY" EXAMPLE #2: CLASSIC RCU - +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This section presents a "toy" RCU implementation that is based on "classic RCU". It is also short on performance (but only for updates) and on features such as hotplug CPU and the ability to run in CONFIG_PREEMPT kernels. The definitions of rcu_dereference() and rcu_assign_pointer() are the same as those shown in the preceding section, so they are omitted. +:: void rcu_read_lock(void) { } @@ -683,14 +712,14 @@ CPU in turn. The run_on() primitive can be implemented straightforwardly in terms of the sched_setaffinity() primitive. Of course, a somewhat less "toy" implementation would restore the affinity upon completion rather than just leaving all tasks running on the last CPU, but when I said -"toy", I meant -toy-! +"toy", I meant **toy**! So how the heck is this supposed to work??? Remember that it is illegal to block while in an RCU read-side critical section. Therefore, if a given CPU executes a context switch, we know that it must have completed all preceding RCU read-side critical sections. -Once -all- CPUs have executed a context switch, then -all- preceding +Once **all** CPUs have executed a context switch, then **all** preceding RCU read-side critical sections will have completed. So, suppose that we remove a data item from its structure and then invoke @@ -698,19 +727,32 @@ synchronize_rcu(). Once synchronize_rcu() returns, we are guaranteed that there are no RCU read-side critical sections holding a reference to that data item, so we can safely reclaim it. -Quick Quiz #2: Give an example where Classic RCU's read-side - overhead is -negative-. +.. _quiz_2: + +Quick Quiz #2: + Give an example where Classic RCU's read-side + overhead is **negative**. + +:ref:`Answers to Quick Quiz <8_whatisRCU>` -Quick Quiz #3: If it is illegal to block in an RCU read-side +.. _quiz_3: + +Quick Quiz #3: + If it is illegal to block in an RCU read-side critical section, what the heck do you do in PREEMPT_RT, where normal spinlocks can block??? +:ref:`Answers to Quick Quiz <8_whatisRCU>` + +.. _6_whatisRCU: 6. ANALOGY WITH READER-WRITER LOCKING +-------------------------------------- Although RCU can be used in many different ways, a very common use of RCU is analogous to reader-writer locking. The following unified diff shows how closely related RCU and reader-writer locking can be. +:: @@ -5,5 +5,5 @@ struct el { int data; @@ -762,7 +804,7 @@ diff shows how closely related RCU and reader-writer locking can be. return 0; } -Or, for those who prefer a side-by-side listing: +Or, for those who prefer a side-by-side listing:: 1 struct el { 1 struct el { 2 struct list_head list; 2 struct list_head list; @@ -774,40 +816,44 @@ Or, for those who prefer a side-by-side listing: 8 rwlock_t listmutex; 8 spinlock_t listmutex; 9 struct el head; 9 struct el head; - 1 int search(long key, int *result) 1 int search(long key, int *result) - 2 { 2 { - 3 struct list_head *lp; 3 struct list_head *lp; - 4 struct el *p; 4 struct el *p; - 5 5 - 6 read_lock(&listmutex); 6 rcu_read_lock(); - 7 list_for_each_entry(p, head, lp) { 7 list_for_each_entry_rcu(p, head, lp) { - 8 if (p->key == key) { 8 if (p->key == key) { - 9 *result = p->data; 9 *result = p->data; -10 read_unlock(&listmutex); 10 rcu_read_unlock(); -11 return 1; 11 return 1; -12 } 12 } -13 } 13 } -14 read_unlock(&listmutex); 14 rcu_read_unlock(); -15 return 0; 15 return 0; -16 } 16 } - - 1 int delete(long key) 1 int delete(long key) - 2 { 2 { - 3 struct el *p; 3 struct el *p; - 4 4 - 5 write_lock(&listmutex); 5 spin_lock(&listmutex); - 6 list_for_each_entry(p, head, lp) { 6 list_for_each_entry(p, head, lp) { - 7 if (p->key == key) { 7 if (p->key == key) { - 8 list_del(&p->list); 8 list_del_rcu(&p->list); - 9 write_unlock(&listmutex); 9 spin_unlock(&listmutex); - 10 synchronize_rcu(); -10 kfree(p); 11 kfree(p); -11 return 1; 12 return 1; -12 } 13 } -13 } 14 } -14 write_unlock(&listmutex); 15 spin_unlock(&listmutex); -15 return 0; 16 return 0; -16 } 17 } +:: + + 1 int search(long key, int *result) 1 int search(long key, int *result) + 2 { 2 { + 3 struct list_head *lp; 3 struct list_head *lp; + 4 struct el *p; 4 struct el *p; + 5 5 + 6 read_lock(&listmutex); 6 rcu_read_lock(); + 7 list_for_each_entry(p, head, lp) { 7 list_for_each_entry_rcu(p, head, lp) { + 8 if (p->key == key) { 8 if (p->key == key) { + 9 *result = p->data; 9 *result = p->data; + 10 read_unlock(&listmutex); 10 rcu_read_unlock(); + 11 return 1; 11 return 1; + 12 } 12 } + 13 } 13 } + 14 read_unlock(&listmutex); 14 rcu_read_unlock(); + 15 return 0; 15 return 0; + 16 } 16 } + +:: + + 1 int delete(long key) 1 int delete(long key) + 2 { 2 { + 3 struct el *p; 3 struct el *p; + 4 4 + 5 write_lock(&listmutex); 5 spin_lock(&listmutex); + 6 list_for_each_entry(p, head, lp) { 6 list_for_each_entry(p, head, lp) { + 7 if (p->key == key) { 7 if (p->key == key) { + 8 list_del(&p->list); 8 list_del_rcu(&p->list); + 9 write_unlock(&listmutex); 9 spin_unlock(&listmutex); + 10 synchronize_rcu(); + 10 kfree(p); 11 kfree(p); + 11 return 1; 12 return 1; + 12 } 13 } + 13 } 14 } + 14 write_unlock(&listmutex); 15 spin_unlock(&listmutex); + 15 return 0; 16 return 0; + 16 } 17 } Either way, the differences are quite small. Read-side locking moves to rcu_read_lock() and rcu_read_unlock, update-side locking moves from @@ -825,22 +871,27 @@ delete() can now block. If this is a problem, there is a callback-based mechanism that never blocks, namely call_rcu() or kfree_rcu(), that can be used in place of synchronize_rcu(). +.. _7_whatisRCU: 7. FULL LIST OF RCU APIs +------------------------- The RCU APIs are documented in docbook-format header comments in the Linux-kernel source code, but it helps to have a full list of the APIs, since there does not appear to be a way to categorize them in docbook. Here is the list, by category. -RCU list traversal: +RCU list traversal:: list_entry_rcu + list_entry_lockless list_first_entry_rcu list_next_rcu list_for_each_entry_rcu list_for_each_entry_continue_rcu list_for_each_entry_from_rcu + list_first_or_null_rcu + list_next_or_null_rcu hlist_first_rcu hlist_next_rcu hlist_pprev_rcu @@ -854,7 +905,7 @@ RCU list traversal: hlist_bl_first_rcu hlist_bl_for_each_entry_rcu -RCU pointer/list update: +RCU pointer/list update:: rcu_assign_pointer list_add_rcu @@ -864,10 +915,12 @@ RCU pointer/list update: hlist_add_behind_rcu hlist_add_before_rcu hlist_add_head_rcu + hlist_add_tail_rcu hlist_del_rcu hlist_del_init_rcu hlist_replace_rcu - list_splice_init_rcu() + list_splice_init_rcu + list_splice_tail_init_rcu hlist_nulls_del_init_rcu hlist_nulls_del_rcu hlist_nulls_add_head_rcu @@ -876,7 +929,9 @@ RCU pointer/list update: hlist_bl_del_rcu hlist_bl_set_first_rcu -RCU: Critical sections Grace period Barrier +RCU:: + + Critical sections Grace period Barrier rcu_read_lock synchronize_net rcu_barrier rcu_read_unlock synchronize_rcu @@ -885,7 +940,9 @@ RCU: Critical sections Grace period Barrier rcu_dereference_check kfree_rcu rcu_dereference_protected -bh: Critical sections Grace period Barrier +bh:: + + Critical sections Grace period Barrier rcu_read_lock_bh call_rcu rcu_barrier rcu_read_unlock_bh synchronize_rcu @@ -896,7 +953,9 @@ bh: Critical sections Grace period Barrier rcu_dereference_bh_protected rcu_read_lock_bh_held -sched: Critical sections Grace period Barrier +sched:: + + Critical sections Grace period Barrier rcu_read_lock_sched call_rcu rcu_barrier rcu_read_unlock_sched synchronize_rcu @@ -910,7 +969,9 @@ sched: Critical sections Grace period Barrier rcu_read_lock_sched_held -SRCU: Critical sections Grace period Barrier +SRCU:: + + Critical sections Grace period Barrier srcu_read_lock call_srcu srcu_barrier srcu_read_unlock synchronize_srcu @@ -918,13 +979,14 @@ SRCU: Critical sections Grace period Barrier srcu_dereference_check srcu_read_lock_held -SRCU: Initialization/cleanup +SRCU: Initialization/cleanup:: + DEFINE_SRCU DEFINE_STATIC_SRCU init_srcu_struct cleanup_srcu_struct -All: lockdep-checked RCU-protected pointer access +All: lockdep-checked RCU-protected pointer access:: rcu_access_pointer rcu_dereference_raw @@ -974,15 +1036,19 @@ g. Otherwise, use RCU. Of course, this all assumes that you have determined that RCU is in fact the right tool for your job. +.. _8_whatisRCU: 8. ANSWERS TO QUICK QUIZZES +---------------------------- -Quick Quiz #1: Why is this argument naive? How could a deadlock +Quick Quiz #1: + Why is this argument naive? How could a deadlock occur when using this algorithm in a real-world Linux kernel? [Referring to the lock-based "toy" RCU algorithm.] -Answer: Consider the following sequence of events: +Answer: + Consider the following sequence of events: 1. CPU 0 acquires some unrelated lock, call it "problematic_lock", disabling irq via @@ -1021,10 +1087,14 @@ Answer: Consider the following sequence of events: approach where tasks in RCU read-side critical sections cannot be blocked by tasks executing synchronize_rcu(). -Quick Quiz #2: Give an example where Classic RCU's read-side - overhead is -negative-. +:ref:`Back to Quick Quiz #1 <quiz_1>` + +Quick Quiz #2: + Give an example where Classic RCU's read-side + overhead is **negative**. -Answer: Imagine a single-CPU system with a non-CONFIG_PREEMPT +Answer: + Imagine a single-CPU system with a non-CONFIG_PREEMPT kernel where a routing table is used by process-context code, but can be updated by irq-context code (for example, by an "ICMP REDIRECT" packet). The usual way of handling @@ -1046,11 +1116,15 @@ Answer: Imagine a single-CPU system with a non-CONFIG_PREEMPT even the theoretical possibility of negative overhead for a synchronization primitive is a bit unexpected. ;-) -Quick Quiz #3: If it is illegal to block in an RCU read-side +:ref:`Back to Quick Quiz #2 <quiz_2>` + +Quick Quiz #3: + If it is illegal to block in an RCU read-side critical section, what the heck do you do in PREEMPT_RT, where normal spinlocks can block??? -Answer: Just as PREEMPT_RT permits preemption of spinlock +Answer: + Just as PREEMPT_RT permits preemption of spinlock critical sections, it permits preemption of RCU read-side critical sections. It also permits spinlocks blocking while in RCU read-side critical @@ -1069,6 +1143,7 @@ Answer: Just as PREEMPT_RT permits preemption of spinlock Besides, how does the computer know what pizza parlor the human being went to??? +:ref:`Back to Quick Quiz #3 <quiz_3>` ACKNOWLEDGEMENTS diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index cdc27cb8d8df..ec92120a7952 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1165,10 +1165,10 @@ efi= [EFI] Format: { "old_map", "nochunk", "noruntime", "debug", - "nosoftreserve" } + "nosoftreserve", "disable_early_pci_dma", + "no_disable_early_pci_dma" } old_map [X86-64]: switch to the old ioremap-based EFI - runtime services mapping. 32-bit still uses this one by - default. + runtime services mapping. [Needs CONFIG_X86_UV=y] nochunk: disable reading files in "chunks" in the EFI boot stub, as chunking can cause problems with some firmware implementations. @@ -1180,6 +1180,10 @@ claim. Specify efi=nosoftreserve to disable this reservation and treat the memory by its base type (i.e. EFI_CONVENTIONAL_MEMORY / "System RAM"). + disable_early_pci_dma: Disable the busmaster bit on all + PCI bridges while in the EFI boot stub + no_disable_early_pci_dma: Leave the busmaster bit set + on all PCI bridges while in the EFI boot stub efi_no_storage_paranoia [EFI; X86] Using this parameter you can use more than 50% of @@ -4001,6 +4005,19 @@ test until boot completes in order to avoid interference. + rcuperf.kfree_rcu_test= [KNL] + Set to measure performance of kfree_rcu() flooding. + + rcuperf.kfree_nthreads= [KNL] + The number of threads running loops of kfree_rcu(). + + rcuperf.kfree_alloc_num= [KNL] + Number of allocations and frees done in an iteration. + + rcuperf.kfree_loops= [KNL] + Number of loops doing rcuperf.kfree_alloc_num number + of allocations and frees. + rcuperf.nreaders= [KNL] Set number of RCU readers. The value -1 selects N, where N is the number of CPUs. A value diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst index ab0eae1c153a..ab0b9ec85506 100644 --- a/Documentation/core-api/index.rst +++ b/Documentation/core-api/index.rst @@ -39,6 +39,7 @@ Core utilities ../RCU/index gcc-plugins symbol-namespaces + padata Interfaces for kernel debugging diff --git a/Documentation/core-api/padata.rst b/Documentation/core-api/padata.rst new file mode 100644 index 000000000000..9a24c111781d --- /dev/null +++ b/Documentation/core-api/padata.rst @@ -0,0 +1,169 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================================= +The padata parallel execution mechanism +======================================= + +:Date: December 2019 + +Padata is a mechanism by which the kernel can farm jobs out to be done in +parallel on multiple CPUs while retaining their ordering. It was developed for +use with the IPsec code, which needs to be able to perform encryption and +decryption on large numbers of packets without reordering those packets. The +crypto developers made a point of writing padata in a sufficiently general +fashion that it could be put to other uses as well. + +Usage +===== + +Initializing +------------ + +The first step in using padata is to set up a padata_instance structure for +overall control of how jobs are to be run:: + + #include <linux/padata.h> + + struct padata_instance *padata_alloc_possible(const char *name); + +'name' simply identifies the instance. + +There are functions for enabling and disabling the instance:: + + int padata_start(struct padata_instance *pinst); + void padata_stop(struct padata_instance *pinst); + +These functions are setting or clearing the "PADATA_INIT" flag; if that flag is +not set, other functions will refuse to work. padata_start() returns zero on +success (flag set) or -EINVAL if the padata cpumask contains no active CPU +(flag not set). padata_stop() clears the flag and blocks until the padata +instance is unused. + +Finally, complete padata initialization by allocating a padata_shell:: + + struct padata_shell *padata_alloc_shell(struct padata_instance *pinst); + +A padata_shell is used to submit a job to padata and allows a series of such +jobs to be serialized independently. A padata_instance may have one or more +padata_shells associated with it, each allowing a separate series of jobs. + +Modifying cpumasks +------------------ + +The CPUs used to run jobs can be changed in two ways, programatically with +padata_set_cpumask() or via sysfs. The former is defined:: + + int padata_set_cpumask(struct padata_instance *pinst, int cpumask_type, + cpumask_var_t cpumask); + +Here cpumask_type is one of PADATA_CPU_PARALLEL or PADATA_CPU_SERIAL, where a +parallel cpumask describes which processors will be used to execute jobs +submitted to this instance in parallel and a serial cpumask defines which +processors are allowed to be used as the serialization callback processor. +cpumask specifies the new cpumask to use. + +There may be sysfs files for an instance's cpumasks. For example, pcrypt's +live in /sys/kernel/pcrypt/<instance-name>. Within an instance's directory +there are two files, parallel_cpumask and serial_cpumask, and either cpumask +may be changed by echoing a bitmask into the file, for example:: + + echo f > /sys/kernel/pcrypt/pencrypt/parallel_cpumask + +Reading one of these files shows the user-supplied cpumask, which may be +different from the 'usable' cpumask. + +Padata maintains two pairs of cpumasks internally, the user-supplied cpumasks +and the 'usable' cpumasks. (Each pair consists of a parallel and a serial +cpumask.) The user-supplied cpumasks default to all possible CPUs on instance +allocation and may be changed as above. The usable cpumasks are always a +subset of the user-supplied cpumasks and contain only the online CPUs in the +user-supplied masks; these are the cpumasks padata actually uses. So it is +legal to supply a cpumask to padata that contains offline CPUs. Once an +offline CPU in the user-supplied cpumask comes online, padata is going to use +it. + +Changing the CPU masks are expensive operations, so it should not be done with +great frequency. + +Running A Job +------------- + +Actually submitting work to the padata instance requires the creation of a +padata_priv structure, which represents one job:: + + struct padata_priv { + /* Other stuff here... */ + void (*parallel)(struct padata_priv *padata); + void (*serial)(struct padata_priv *padata); + }; + +This structure will almost certainly be embedded within some larger +structure specific to the work to be done. Most of its fields are private to +padata, but the structure should be zeroed at initialisation time, and the +parallel() and serial() functions should be provided. Those functions will +be called in the process of getting the work done as we will see +momentarily. + +The submission of the job is done with:: + + int padata_do_parallel(struct padata_shell *ps, + struct padata_priv *padata, int *cb_cpu); + +The ps and padata structures must be set up as described above; cb_cpu +points to the preferred CPU to be used for the final callback when the job is +done; it must be in the current instance's CPU mask (if not the cb_cpu pointer +is updated to point to the CPU actually chosen). The return value from +padata_do_parallel() is zero on success, indicating that the job is in +progress. -EBUSY means that somebody, somewhere else is messing with the +instance's CPU mask, while -EINVAL is a complaint about cb_cpu not being in the +serial cpumask, no online CPUs in the parallel or serial cpumasks, or a stopped +instance. + +Each job submitted to padata_do_parallel() will, in turn, be passed to +exactly one call to the above-mentioned parallel() function, on one CPU, so +true parallelism is achieved by submitting multiple jobs. parallel() runs with +software interrupts disabled and thus cannot sleep. The parallel() +function gets the padata_priv structure pointer as its lone parameter; +information about the actual work to be done is probably obtained by using +container_of() to find the enclosing structure. + +Note that parallel() has no return value; the padata subsystem assumes that +parallel() will take responsibility for the job from this point. The job +need not be completed during this call, but, if parallel() leaves work +outstanding, it should be prepared to be called again with a new job before +the previous one completes. + +Serializing Jobs +---------------- + +When a job does complete, parallel() (or whatever function actually finishes +the work) should inform padata of the fact with a call to:: + + void padata_do_serial(struct padata_priv *padata); + +At some point in the future, padata_do_serial() will trigger a call to the +serial() function in the padata_priv structure. That call will happen on +the CPU requested in the initial call to padata_do_parallel(); it, too, is +run with local software interrupts disabled. +Note that this call may be deferred for a while since the padata code takes +pains to ensure that jobs are completed in the order in which they were +submitted. + +Destroying +---------- + +Cleaning up a padata instance predictably involves calling the three free +functions that correspond to the allocation in reverse:: + + void padata_free_shell(struct padata_shell *ps); + void padata_stop(struct padata_instance *pinst); + void padata_free(struct padata_instance *pinst); + +It is the user's responsibility to ensure all outstanding jobs are complete +before any of the above are called. + +Interface +========= + +.. kernel-doc:: include/linux/padata.h +.. kernel-doc:: kernel/padata.c diff --git a/Documentation/crypto/devel-algos.rst b/Documentation/crypto/devel-algos.rst index f9d288015acc..f225a953ab4b 100644 --- a/Documentation/crypto/devel-algos.rst +++ b/Documentation/crypto/devel-algos.rst @@ -31,33 +31,23 @@ The counterparts to those functions are listed below. :: - int crypto_unregister_alg(struct crypto_alg *alg); - int crypto_unregister_algs(struct crypto_alg *algs, int count); + void crypto_unregister_alg(struct crypto_alg *alg); + void crypto_unregister_algs(struct crypto_alg *algs, int count); -Notice that both registration and unregistration functions do return a -value, so make sure to handle errors. A return code of zero implies -success. Any return code < 0 implies an error. +The registration functions return 0 on success, or a negative errno +value on failure. crypto_register_algs() succeeds only if it +successfully registered all the given algorithms; if it fails partway +through, then any changes are rolled back. -The bulk registration/unregistration functions register/unregister each -transformation in the given array of length count. They handle errors as -follows: - -- crypto_register_algs() succeeds if and only if it successfully - registers all the given transformations. If an error occurs partway - through, then it rolls back successful registrations before returning - the error code. Note that if a driver needs to handle registration - errors for individual transformations, then it will need to use the - non-bulk function crypto_register_alg() instead. - -- crypto_unregister_algs() tries to unregister all the given - transformations, continuing on error. It logs errors and always - returns zero. +The unregistration functions always succeed, so they don't have a +return value. Don't try to unregister algorithms that aren't +currently registered. Single-Block Symmetric Ciphers [CIPHER] --------------------------------------- -Example of transformations: aes, arc4, ... +Example of transformations: aes, serpent, ... This section describes the simplest of all transformation implementations, that being the CIPHER type used for symmetric ciphers. @@ -108,7 +98,7 @@ is also valid: Multi-Block Ciphers ------------------- -Example of transformations: cbc(aes), ecb(arc4), ... +Example of transformations: cbc(aes), chacha20, ... This section describes the multi-block cipher transformation implementations. The multi-block ciphers are used for transformations @@ -169,10 +159,10 @@ are as follows: :: - int crypto_unregister_ahash(struct ahash_alg *alg); + void crypto_unregister_ahash(struct ahash_alg *alg); - int crypto_unregister_shash(struct shash_alg *alg); - int crypto_unregister_shashes(struct shash_alg *algs, int count); + void crypto_unregister_shash(struct shash_alg *alg); + void crypto_unregister_shashes(struct shash_alg *algs, int count); Cipher Definition With struct shash_alg and ahash_alg diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt index f16b99571af1..dd258674633c 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt @@ -11,6 +11,7 @@ Required properties: - compatible: should contain one of the following: * "brcm,bcm20702a1" + * "brcm,bcm4329-bt" * "brcm,bcm4330-bt" * "brcm,bcm43438-bt" * "brcm,bcm4345c5" @@ -22,7 +23,9 @@ Optional properties: - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt - shutdown-gpios: GPIO specifier, used to enable the BT module - device-wakeup-gpios: GPIO specifier, used to wakeup the controller - - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor + - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor. + deprecated, replaced by interrupts and + "host-wakeup" interrupt-names - clocks: 1 or 2 clocks as defined in clock-names below, in that order - clock-names: names for clock inputs, matching the clocks given - "extclk": deprecated, replaced by "txco" @@ -30,7 +33,14 @@ Optional properties: - "lpo": external low power 32.768 kHz clock - vbat-supply: phandle to regulator supply for VBAT - vddio-supply: phandle to regulator supply for VDDIO - + - brcm,bt-pcm-int-params: configure PCM parameters via a 5-byte array + - sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S + - pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps + - pcm-frame-type: short, long + - pcm-sync-mode: slave, master + - pcm-clock-mode: slave, master + - interrupts: must be one, used to wakeup the host processor + - interrupt-names: must be "host-wakeup" Example: @@ -41,5 +51,6 @@ Example: bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <921600>; + brcm,bt-pcm-int-params = [01 02 00 01 01]; }; }; diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt new file mode 100644 index 000000000000..320607cbbb17 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/ar9331.txt @@ -0,0 +1,148 @@ +Atheros AR9331 built-in switch +============================= + +It is a switch built-in to Atheros AR9331 WiSoC and addressable over internal +MDIO bus. All PHYs are built-in as well. + +Required properties: + + - compatible: should be: "qca,ar9331-switch" + - reg: Address on the MII bus for the switch. + - resets : Must contain an entry for each entry in reset-names. + - reset-names : Must include the following entries: "switch" + - interrupt-parent: Phandle to the parent interrupt controller + - interrupts: IRQ line for the switch + - interrupt-controller: Indicates the switch is itself an interrupt + controller. This is used for the PHY interrupts. + - #interrupt-cells: must be 1 + - mdio: Container of PHY and devices on the switches MDIO bus. + +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional +required and optional properties. +Examples: + +eth0: ethernet@19000000 { + compatible = "qca,ar9330-eth"; + reg = <0x19000000 0x200>; + interrupts = <4>; + + resets = <&rst 9>, <&rst 22>; + reset-names = "mac", "mdio"; + clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; + clock-names = "eth", "mdio"; + + phy-mode = "mii"; + phy-handle = <&phy_port4>; +}; + +eth1: ethernet@1a000000 { + compatible = "qca,ar9330-eth"; + reg = <0x1a000000 0x200>; + interrupts = <5>; + resets = <&rst 13>, <&rst 23>; + reset-names = "mac", "mdio"; + clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; + clock-names = "eth", "mdio"; + + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch10: switch@10 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "qca,ar9331-switch"; + reg = <0x10>; + resets = <&rst 8>; + reset-names = "switch"; + + interrupt-parent = <&miscintc>; + interrupts = <12>; + + interrupt-controller; + #interrupt-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch_port0: port@0 { + reg = <0x0>; + label = "cpu"; + ethernet = <ð1>; + + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch_port1: port@1 { + reg = <0x1>; + phy-handle = <&phy_port0>; + phy-mode = "internal"; + }; + + switch_port2: port@2 { + reg = <0x2>; + phy-handle = <&phy_port1>; + phy-mode = "internal"; + }; + + switch_port3: port@3 { + reg = <0x3>; + phy-handle = <&phy_port2>; + phy-mode = "internal"; + }; + + switch_port4: port@4 { + reg = <0x4>; + phy-handle = <&phy_port3>; + phy-mode = "internal"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&switch10>; + + phy_port0: phy@0 { + reg = <0x0>; + interrupts = <0>; + }; + + phy_port1: phy@1 { + reg = <0x1>; + interrupts = <0>; + }; + + phy_port2: phy@2 { + reg = <0x2>; + interrupts = <0>; + }; + + phy_port3: phy@3 { + reg = <0x3>; + interrupts = <0>; + }; + + phy_port4: phy@4 { + reg = <0x4>; + interrupts = <0>; + }; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt index 8a08621a5b54..afbcaebf062e 100644 --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt @@ -14,7 +14,7 @@ Required properties: Should be "macirq" for the main MAC IRQ - clocks: Must contain a phandle for each entry in clock-names. - clock-names: The name of the clock listed in the clocks property. These are - "axi", "apb", "mac_main", "ptp_ref" for MT2712 SoC + "axi", "apb", "mac_main", "ptp_ref", "rmii_internal" for MT2712 SoC. - mac-address: See ethernet.txt in the same directory - phy-mode: See ethernet.txt in the same directory - mediatek,pericfg: A phandle to the syscon node that control ethernet @@ -23,8 +23,10 @@ Required properties: Optional properties: - mediatek,tx-delay-ps: TX clock delay macro value. Default is 0. It should be defined for RGMII/MII interface. + It should be defined for RMII interface when the reference clock is from MT2712 SoC. - mediatek,rx-delay-ps: RX clock delay macro value. Default is 0. - It should be defined for RGMII/MII/RMII interface. + It should be defined for RGMII/MII interface. + It should be defined for RMII interface. Both delay properties need to be a multiple of 170 for RGMII interface, or will round down. Range 0~31*170. Both delay properties need to be a multiple of 550 for MII/RMII interface, @@ -34,13 +36,20 @@ or will round down. Range 0~31*550. reference clock, which is from external PHYs, is connected to RXC pin on MT2712 SoC. Otherwise, is connected to TXC pin. +- mediatek,rmii-clk-from-mac: boolean property, if present indicates that + MT2712 SoC provides the RMII reference clock, which outputs to TXC pin only. - mediatek,txc-inverse: boolean property, if present indicates that 1. tx clock will be inversed in MII/RGMII case, 2. tx clock inside MAC will be inversed relative to reference clock which is from external PHYs in RMII case, and it rarely happen. + 3. the reference clock, which outputs to TXC pin will be inversed in RMII case + when the reference clock is from MT2712 SoC. - mediatek,rxc-inverse: boolean property, if present indicates that 1. rx clock will be inversed in MII/RGMII case. - 2. reference clock will be inversed when arrived at MAC in RMII case. + 2. reference clock will be inversed when arrived at MAC in RMII case, when + the reference clock is from external PHYs. + 3. the inside clock, which be sent to MAC, will be inversed in RMII case when + the reference clock is from MT2712 SoC. - assigned-clocks: mac_main and ptp_ref clocks - assigned-clock-parents: parent clocks of the assigned clocks @@ -50,29 +59,33 @@ Example: reg = <0 0x1101c000 0 0x1300>; interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "macirq"; - phy-mode ="rgmii"; + phy-mode ="rgmii-rxid"; mac-address = [00 55 7b b5 7d f7]; clock-names = "axi", "apb", "mac_main", "ptp_ref", - "ptp_top"; + "rmii_internal"; clocks = <&pericfg CLK_PERI_GMAC>, <&pericfg CLK_PERI_GMAC_PCLK>, <&topckgen CLK_TOP_ETHER_125M_SEL>, - <&topckgen CLK_TOP_ETHER_50M_SEL>; + <&topckgen CLK_TOP_ETHER_50M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>; assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>, - <&topckgen CLK_TOP_ETHER_50M_SEL>; + <&topckgen CLK_TOP_ETHER_50M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>, - <&topckgen CLK_TOP_APLL1_D3>; + <&topckgen CLK_TOP_APLL1_D3>, + <&topckgen CLK_TOP_ETHERPLL_50M>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>; mediatek,pericfg = <&pericfg>; mediatek,tx-delay-ps = <1530>; mediatek,rx-delay-ps = <1530>; mediatek,rmii-rxc; mediatek,txc-inverse; mediatek,rxc-inverse; - snps,txpbl = <32>; - snps,rxpbl = <32>; + snps,txpbl = <1>; + snps,rxpbl = <1>; snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; snps,reset-active-low; }; diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt index 388ff48f53ae..44e2a4fab29e 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt @@ -8,8 +8,6 @@ Required properties: - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values. Required only if interface type is PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID - - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h - for applicable values Note: If the interface type is PHY_INTERFACE_MODE_RGMII the TX/RX clock delays will be left at their default values, as set by the PHY's pin strapping. @@ -42,6 +40,14 @@ Optional property: Some MACs work with differential SGMII clock. See data manual for details. + - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h + for applicable values (deprecated) + + -tx-fifo-depth - As defined in the ethernet-controller.yaml. Values for + the depth can be found in dt-bindings/net/ti-dp83867.h + -rx-fifo-depth - As defined in the ethernet-controller.yaml. Values for + the depth can be found in dt-bindings/net/ti-dp83867.h + Note: ti,min-output-impedance and ti,max-output-impedance are mutually exclusive. When both properties are present ti,max-output-impedance takes precedence. @@ -55,7 +61,7 @@ Example: reg = <0>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; }; Datasheet can be found: diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 017128394a3e..616c87746d6f 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -50,7 +50,7 @@ Optional properties: entry in clock-names. - clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref", "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and - "cxo_ref_clk_pin" for "qcom,wcn3990-wifi" + "cxo_ref_clk_pin" and optionally "qdss" for "qcom,wcn3990-wifi" compatible target. - qcom,msi_addr: MSI interrupt address. - qcom,msi_base: Base value to add before writing MSI data into @@ -88,6 +88,9 @@ Optional properties: of the host capability QMI request - qcom,xo-cal-data: xo cal offset to be configured in xo trim register. +- qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically + mapped msa region. + Example (to supply PCI based wifi block details): In this example, the node is defined as child node of the PCI controller. @@ -185,4 +188,5 @@ wifi@18000000 { vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; memory-region = <&wifi_msa_mem>; iommus = <&apps_smmu 0x0040 0x1>; + qcom,msa-fixed-perm; }; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml new file mode 100644 index 000000000000..a1717db36dba --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -0,0 +1,273 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath11k wireless devices Generic Binding + +maintainers: + - Kalle Valo <kvalo@codeaurora.org> + +description: | + These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax + devices, for example like AHB based IPQ8074. + +properties: + compatible: + const: qcom,ipq8074-wifi + + reg: + maxItems: 1 + + interrupts: + items: + - description: misc-pulse1 interrupt events + - description: misc-latch interrupt events + - description: sw exception interrupt events + - description: watchdog interrupt events + - description: interrupt event for ring CE0 + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring CE11 + - description: interrupt event for ring host2wbm-desc-feed + - description: interrupt event for ring host2reo-re-injection + - description: interrupt event for ring host2reo-command + - description: interrupt event for ring host2rxdma-monitor-ring3 + - description: interrupt event for ring host2rxdma-monitor-ring2 + - description: interrupt event for ring host2rxdma-monitor-ring1 + - description: interrupt event for ring reo2ost-exception + - description: interrupt event for ring wbm2host-rx-release + - description: interrupt event for ring reo2host-status + - description: interrupt event for ring reo2host-destination-ring4 + - description: interrupt event for ring reo2host-destination-ring3 + - description: interrupt event for ring reo2host-destination-ring2 + - description: interrupt event for ring reo2host-destination-ring1 + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 + - description: interrupt event for ring ppdu-end-interrupts-mac3 + - description: interrupt event for ring ppdu-end-interrupts-mac2 + - description: interrupt event for ring ppdu-end-interrupts-mac1 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 + - description: interrupt event for ring rxdma2host-destination-ring-mac3 + - description: interrupt event for ring rxdma2host-destination-ring-mac2 + - description: interrupt event for ring rxdma2host-destination-ring-mac1 + - description: interrupt event for ring host2tcl-input-ring4 + - description: interrupt event for ring host2tcl-input-ring3 + - description: interrupt event for ring host2tcl-input-ring2 + - description: interrupt event for ring host2tcl-input-ring1 + - description: interrupt event for ring wbm2host-tx-completions-ring3 + - description: interrupt event for ring wbm2host-tx-completions-ring2 + - description: interrupt event for ring wbm2host-tx-completions-ring1 + - description: interrupt event for ring tcl2host-status-ring + + + interrupt-names: + items: + - const: misc-pulse1 + - const: misc-latch + - const: sw-exception + - const: watchdog + - const: ce0 + - const: ce1 + - const: ce2 + - const: ce3 + - const: ce4 + - const: ce5 + - const: ce6 + - const: ce7 + - const: ce8 + - const: ce9 + - const: ce10 + - const: ce11 + - const: host2wbm-desc-feed + - const: host2reo-re-injection + - const: host2reo-command + - const: host2rxdma-monitor-ring3 + - const: host2rxdma-monitor-ring2 + - const: host2rxdma-monitor-ring1 + - const: reo2ost-exception + - const: wbm2host-rx-release + - const: reo2host-status + - const: reo2host-destination-ring4 + - const: reo2host-destination-ring3 + - const: reo2host-destination-ring2 + - const: reo2host-destination-ring1 + - const: rxdma2host-monitor-destination-mac3 + - const: rxdma2host-monitor-destination-mac2 + - const: rxdma2host-monitor-destination-mac1 + - const: ppdu-end-interrupts-mac3 + - const: ppdu-end-interrupts-mac2 + - const: ppdu-end-interrupts-mac1 + - const: rxdma2host-monitor-status-ring-mac3 + - const: rxdma2host-monitor-status-ring-mac2 + - const: rxdma2host-monitor-status-ring-mac1 + - const: host2rxdma-host-buf-ring-mac3 + - const: host2rxdma-host-buf-ring-mac2 + - const: host2rxdma-host-buf-ring-mac1 + - const: rxdma2host-destination-ring-mac3 + - const: rxdma2host-destination-ring-mac2 + - const: rxdma2host-destination-ring-mac1 + - const: host2tcl-input-ring4 + - const: host2tcl-input-ring3 + - const: host2tcl-input-ring2 + - const: host2tcl-input-ring1 + - const: wbm2host-tx-completions-ring3 + - const: wbm2host-tx-completions-ring2 + - const: wbm2host-tx-completions-ring1 + - const: tcl2host-status-ring + + qcom,rproc: + $ref: /schemas/types.yaml#definitions/phandle + description: + DT entry of q6v5-wcss remoteproc driver. + Phandle to a node that can contain the following properties + * compatible + * reg + * reg-names + +required: + - compatible + - reg + - interrupts + - interrupt-names + - qcom,rproc + +additionalProperties: false + +examples: + - | + + q6v5_wcss: q6v5_wcss@CD00000 { + compatible = "qcom,ipq8074-wcss-pil"; + reg = <0xCD00000 0x4040>, + <0x4AB000 0x20>; + reg-names = "qdsp6", + "rmb"; + }; + + wifi0: wifi@c000000 { + compatible = "qcom,ipq8074-wifi"; + reg = <0xc000000 0x2000000>; + interrupts = <0 320 1>, + <0 319 1>, + <0 318 1>, + <0 317 1>, + <0 316 1>, + <0 315 1>, + <0 314 1>, + <0 311 1>, + <0 310 1>, + <0 411 1>, + <0 410 1>, + <0 40 1>, + <0 39 1>, + <0 302 1>, + <0 301 1>, + <0 37 1>, + <0 36 1>, + <0 296 1>, + <0 295 1>, + <0 294 1>, + <0 293 1>, + <0 292 1>, + <0 291 1>, + <0 290 1>, + <0 289 1>, + <0 288 1>, + <0 239 1>, + <0 236 1>, + <0 235 1>, + <0 234 1>, + <0 233 1>, + <0 232 1>, + <0 231 1>, + <0 230 1>, + <0 229 1>, + <0 228 1>, + <0 224 1>, + <0 223 1>, + <0 203 1>, + <0 183 1>, + <0 180 1>, + <0 179 1>, + <0 178 1>, + <0 177 1>, + <0 176 1>, + <0 163 1>, + <0 162 1>, + <0 160 1>, + <0 159 1>, + <0 158 1>, + <0 157 1>, + <0 156 1>; + interrupt-names = "misc-pulse1", + "misc-latch", + "sw-exception", + "watchdog", + "ce0", + "ce1", + "ce2", + "ce3", + "ce4", + "ce5", + "ce6", + "ce7", + "ce8", + "ce9", + "ce10", + "ce11", + "host2wbm-desc-feed", + "host2reo-re-injection", + "host2reo-command", + "host2rxdma-monitor-ring3", + "host2rxdma-monitor-ring2", + "host2rxdma-monitor-ring1", + "reo2ost-exception", + "wbm2host-rx-release", + "reo2host-status", + "reo2host-destination-ring4", + "reo2host-destination-ring3", + "reo2host-destination-ring2", + "reo2host-destination-ring1", + "rxdma2host-monitor-destination-mac3", + "rxdma2host-monitor-destination-mac2", + "rxdma2host-monitor-destination-mac1", + "ppdu-end-interrupts-mac3", + "ppdu-end-interrupts-mac2", + "ppdu-end-interrupts-mac1", + "rxdma2host-monitor-status-ring-mac3", + "rxdma2host-monitor-status-ring-mac2", + "rxdma2host-monitor-status-ring-mac1", + "host2rxdma-host-buf-ring-mac3", + "host2rxdma-host-buf-ring-mac2", + "host2rxdma-host-buf-ring-mac1", + "rxdma2host-destination-ring-mac3", + "rxdma2host-destination-ring-mac2", + "rxdma2host-destination-ring-mac1", + "host2tcl-input-ring4", + "host2tcl-input-ring3", + "host2tcl-input-ring2", + "host2tcl-input-ring1", + "wbm2host-tx-completions-ring3", + "wbm2host-tx-completions-ring2", + "wbm2host-tx-completions-ring1", + "tcl2host-status-ring"; + qcom,rproc = <&q6v5_wcss>; + }; diff --git a/Documentation/devicetree/bindings/ptp/ptp-ines.txt b/Documentation/devicetree/bindings/ptp/ptp-ines.txt new file mode 100644 index 000000000000..4c242bd1ce9c --- /dev/null +++ b/Documentation/devicetree/bindings/ptp/ptp-ines.txt @@ -0,0 +1,35 @@ +ZHAW InES PTP time stamping IP core + +The IP core needs two different kinds of nodes. The control node +lives somewhere in the memory map and specifies the address of the +control registers. There can be up to three port handles placed as +attributes of PHY nodes. These associate a particular MII bus with a +port index within the IP core. + +Required properties of the control node: + +- compatible: "ines,ptp-ctrl" +- reg: physical address and size of the register bank + +Required format of the port handle within the PHY node: + +- timestamper: provides control node reference and + the port channel within the IP core + +Example: + + tstamper: timestamper@60000000 { + compatible = "ines,ptp-ctrl"; + reg = <0x60000000 0x80>; + }; + + ethernet@80000000 { + ... + mdio { + ... + ethernet-phy@3 { + ... + timestamper = <&tstamper 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/ptp/timestamper.txt b/Documentation/devicetree/bindings/ptp/timestamper.txt new file mode 100644 index 000000000000..fc550ce4d4ea --- /dev/null +++ b/Documentation/devicetree/bindings/ptp/timestamper.txt @@ -0,0 +1,42 @@ +Time stamps from MII bus snooping devices + +This binding supports non-PHY devices that snoop the MII bus and +provide time stamps. In contrast to PHY time stamping drivers (which +can simply attach their interface directly to the PHY instance), stand +alone MII time stamping drivers use this binding to specify the +connection between the snooping device and a given network interface. + +Non-PHY MII time stamping drivers typically talk to the control +interface over another bus like I2C, SPI, UART, or via a memory mapped +peripheral. This controller device is associated with one or more +time stamping channels, each of which snoops on a MII bus. + +The "timestamper" property lives in a phy node and links a time +stamping channel from the controller device to that phy's MII bus. + +Example: + + tstamper: timestamper@10000000 { + compatible = "ines,ptp-ctrl"; + reg = <0x10000000 0x80>; + }; + + ethernet@20000000 { + mdio { + ethernet-phy@1 { + timestamper = <&tstamper 0>; + }; + }; + }; + + ethernet@30000000 { + mdio { + ethernet-phy@2 { + timestamper = <&tstamper 1>; + }; + }; + }; + +In this example, time stamps from the MII bus attached to phy@1 will +appear on time stamp channel 0 (zero), and those from phy@2 appear on +channel 1. diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt index c223e54452da..802523196ee5 100644 --- a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt +++ b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt @@ -2,6 +2,7 @@ HWRNG support for the iproc-rng200 driver Required properties: - compatible : Must be one of: + "brcm,bcm2711-rng200" "brcm,bcm7211-rng200" "brcm,bcm7278-rng200" "brcm,iproc-rng200" diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt index 3080979350a0..fa4545ed81ca 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt @@ -17,6 +17,9 @@ Required properties: * "arb" : memory ARB line (required) * "rst" : dedicated device reset line (optional) - #sound-dai-cells: must be 0. +- amlogic,fifo-depth: The size of the controller's fifo in bytes. This + is useful for determining certain configuration such + as the flush threshold of the fifo Example of FRDDR A on the A113 SoC: @@ -27,4 +30,5 @@ frddr_a: audio-controller@1c0 { interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; resets = <&arb AXG_ARB_FRDDR_A>; + fifo-depth = <512>; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt index 1d4d9f938689..cb9a25165503 100644 --- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt +++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt @@ -8,7 +8,12 @@ three substreams within totally 10 channels. Required properties: - - compatible : Contains "fsl,imx35-asrc" or "fsl,imx53-asrc". + - compatible : Compatible list, should contain one of the following + compatibles: + "fsl,imx35-asrc", + "fsl,imx53-asrc", + "fsl,imx8qm-asrc", + "fsl,imx8qxp-asrc", - reg : Offset and length of the register set for the device. @@ -35,6 +40,11 @@ Required properties: - fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends. + - fsl,asrc-clk-map : Defines clock map used in driver. which is required + by imx8qm/imx8qxp platform + <0> - select the map for asrc0 in imx8qm/imx8qxp + <1> - select the map for asrc1 in imx8qm/imx8qxp + Optional properties: - big-endian : If this property is absent, the little endian mode diff --git a/Documentation/devicetree/bindings/sound/gtm601.txt b/Documentation/devicetree/bindings/sound/gtm601.txt index 5efc8c068de0..efa32a486c4a 100644 --- a/Documentation/devicetree/bindings/sound/gtm601.txt +++ b/Documentation/devicetree/bindings/sound/gtm601.txt @@ -1,10 +1,16 @@ GTM601 UMTS modem audio interface CODEC -This device has no configuration interface. Sample rate is fixed - 8kHz. +This device has no configuration interface. The sample rate and channels are +based on the compatible string + "option,gtm601" = 8kHz mono + "broadmobi,bm818" = 48KHz stereo Required properties: - - compatible : "option,gtm601" + - compatible : one of + "option,gtm601" + "broadmobi,bm818" + Example: diff --git a/Documentation/devicetree/bindings/sound/ingenic,codec.yaml b/Documentation/devicetree/bindings/sound/ingenic,codec.yaml new file mode 100644 index 000000000000..eb4be86464bb --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ingenic,codec.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ingenic,codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic JZ47xx internal codec DT bindings + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + $nodename: + pattern: '^audio-codec@.*' + + compatible: + oneOf: + - const: ingenic,jz4770-codec + - const: ingenic,jz4725b-codec + - const: ingenic,jz4740-codec + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: aic + + '#sound-dai-cells': + const: 0 + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - '#sound-dai-cells' + +examples: + - | + #include <dt-bindings/clock/jz4740-cgu.h> + codec: audio-codec@10020080 { + compatible = "ingenic,jz4740-codec"; + reg = <0x10020080 0x8>; + #sound-dai-cells = <0>; + clocks = <&cgu JZ4740_CLK_AIC>; + clock-names = "aic"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/ingenic,jz4725b-codec.txt b/Documentation/devicetree/bindings/sound/ingenic,jz4725b-codec.txt deleted file mode 100644 index 05adc0d47b13..000000000000 --- a/Documentation/devicetree/bindings/sound/ingenic,jz4725b-codec.txt +++ /dev/null @@ -1,20 +0,0 @@ -Ingenic JZ4725B codec controller - -Required properties: -- compatible : "ingenic,jz4725b-codec" -- reg : codec registers location and length -- clocks : phandle to the AIC clock. -- clock-names: must be set to "aic". -- #sound-dai-cells: Must be set to 0. - -Example: - -codec: audio-codec@100200a4 { - compatible = "ingenic,jz4725b-codec"; - reg = <0x100200a4 0x8>; - - #sound-dai-cells = <0>; - - clocks = <&cgu JZ4725B_CLK_AIC>; - clock-names = "aic"; -}; diff --git a/Documentation/devicetree/bindings/sound/ingenic,jz4740-codec.txt b/Documentation/devicetree/bindings/sound/ingenic,jz4740-codec.txt deleted file mode 100644 index 1ffcade87e7b..000000000000 --- a/Documentation/devicetree/bindings/sound/ingenic,jz4740-codec.txt +++ /dev/null @@ -1,20 +0,0 @@ -Ingenic JZ4740 codec controller - -Required properties: -- compatible : "ingenic,jz4740-codec" -- reg : codec registers location and length -- clocks : phandle to the AIC clock. -- clock-names: must be set to "aic". -- #sound-dai-cells: Must be set to 0. - -Example: - -codec: audio-codec@10020080 { - compatible = "ingenic,jz4740-codec"; - reg = <0x10020080 0x8>; - - #sound-dai-cells = <0>; - - clocks = <&cgu JZ4740_CLK_AIC>; - clock-names = "aic"; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt index 408c4837e6d5..ca8c89e88bfa 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt +++ b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt @@ -5,7 +5,10 @@ This binding describes the SDM845 sound card, which uses qdsp for audio. - compatible: Usage: required Value type: <stringlist> - Definition: must be "qcom,sdm845-sndcard" + Definition: must be one of this + "qcom,sdm845-sndcard" + "qcom,db845c-sndcard" + "lenovo,yoga-c630-sndcard" - audio-routing: Usage: Optional diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml new file mode 100644 index 000000000000..38eaf0c028f9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd934x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for Qualcomm WCD9340/WCD9341 Audio Codec + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC. + It has in-built Soundwire controller, pin controller, interrupt mux and + supports both I2S/I2C and SLIMbus audio interfaces. + +properties: + compatible: + const: slim217,250 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + description: GPIO spec for reset line to use + maxItems: 1 + + slim-ifc-dev: true + + clocks: + maxItems: 1 + + clock-names: + const: extclk + + vdd-buck-supply: + description: A reference to the 1.8V buck supply + + vdd-buck-sido-supply: + description: A reference to the 1.8V SIDO buck supply + + vdd-rx-supply: + description: A reference to the 1.8V rx supply + + vdd-tx-supply: + description: A reference to the 1.8V tx supply + + vdd-vbat-supply: + description: A reference to the vbat supply + + vdd-io-supply: + description: A reference to the 1.8V I/O supply + + vdd-micbias-supply: + description: A reference to the micbias supply + + qcom,micbias1-microvolt: + description: micbias1 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias2-microvolt: + description: micbias2 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias3-microvolt: + description: micbias3 voltage + minimum: 1800000 + maximum: 2850000 + + qcom,micbias4-microvolt: + description: micbias4 voltage + minimum: 1800000 + maximum: 2850000 + + clock-output-names: + const: mclk + + clock-frequency: + description: Clock frequency of output clk in Hz + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + '#clock-cells': + const: 0 + + '#sound-dai-cells': + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + gpio@42: + type: object + allOf: + - $ref: ../gpio/qcom,wcd934x-gpio.yaml# + +patternProperties: + "^.*@[0-9a-f]+$": + type: object + description: | + WCD934x subnode for each slave devices. Bindings of each subnodes + depends on the specific driver providing the functionality and + documented in their respective bindings. + + properties: + reg: + maxItems: 1 + + required: + - reg + +required: + - compatible + - reg + - reset-gpios + - slim-ifc-dev + - interrupts + - interrupt-controller + - clock-frequency + - clock-output-names + - qcom,micbias1-microvolt + - qcom,micbias2-microvolt + - qcom,micbias3-microvolt + - qcom,micbias4-microvolt + - "#interrupt-cells" + - "#clock-cells" + - "#sound-dai-cells" + - "#address-cells" + - "#size-cells" + +examples: + - | + codec@1,0{ + compatible = "slim217,250"; + reg = <1 0>; + reset-gpios = <&tlmm 64 0>; + slim-ifc-dev = <&wcd9340_ifd>; + #sound-dai-cells = <1>; + interrupt-parent = <&tlmm>; + interrupts = <54 4>; + interrupt-controller; + #interrupt-cells = <1>; + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + clock-names = "extclk"; + clocks = <&rpmhcc 2>; + + #address-cells = <1>; + #size-cells = <1>; + + gpio@42 { + compatible = "qcom,wcd9340-gpio"; + reg = <0x42 0x2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml new file mode 100644 index 000000000000..ea44d03e58ca --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wsa881x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + WSA8810 is a class-D smart speaker amplifier and WSA8815 + is a high-output power class-D smart speaker amplifier. + Their primary operating mode uses a SoundWire digital audio + interface. This binding is for SoundWire interface. + +properties: + compatible: + const: sdw10217201000 + + reg: + maxItems: 1 + + powerdown-gpios: + description: GPIO spec for Powerdown/Shutdown line to use + maxItems: 1 + + '#thermal-sensor-cells': + const: 0 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + - powerdown-gpios + - "#thermal-sensor-cells" + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + soundwire@c2d0000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x0c2d0000 0x2000>; + + speaker@0,1 { + compatible = "sdw10217201000"; + reg = <0 1>; + powerdown-gpios = <&wcdpinctrl 2 0>; + #thermal-sensor-cells = <0>; + #sound-dai-cells = <0>; + }; + + speaker@0,2 { + compatible = "sdw10217201000"; + reg = <0 2>; + powerdown-gpios = <&wcdpinctrl 2 0>; + #thermal-sensor-cells = <0>; + #sound-dai-cells = <0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/rt1015.txt b/Documentation/devicetree/bindings/sound/rt1015.txt new file mode 100644 index 000000000000..fcfd02d8d32f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt1015.txt @@ -0,0 +1,17 @@ +RT1015 Mono Class D Audio Amplifier + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt1015". + +- reg : The I2C address of the device. + + +Example: + +rt1015: codec@28 { + compatible = "realtek,rt1015"; + reg = <0x28>; +}; diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt index a03f9a872a71..41a62fd2ae1f 100644 --- a/Documentation/devicetree/bindings/sound/rt5645.txt +++ b/Documentation/devicetree/bindings/sound/rt5645.txt @@ -10,6 +10,10 @@ Required properties: - interrupts : The CODEC's interrupt output. +- avdd-supply: Power supply for AVDD, providing 1.8V. + +- cpvdd-supply: Power supply for CPVDD, providing 3.5V. + Optional properties: - hp-detect-gpios: diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml new file mode 100644 index 000000000000..87369264feb9 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/allwinner,sun8i-a83t-ths.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner SUN8I Thermal Controller Device Tree Bindings + +maintainers: + - Vasily Khoruzhick <anarsoul@gmail.com> + - Yangtao Li <tiny.windzz@gmail.com> + +properties: + compatible: + enum: + - allwinner,sun8i-a83t-ths + - allwinner,sun8i-h3-ths + - allwinner,sun8i-r40-ths + - allwinner,sun50i-a64-ths + - allwinner,sun50i-h5-ths + - allwinner,sun50i-h6-ths + + clocks: + minItems: 1 + maxItems: 2 + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: bus + - const: mod + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + nvmem-cells: + maxItems: 1 + description: Calibration data for thermal sensors + + nvmem-cell-names: + const: calibration + + # See ./thermal.txt for details + "#thermal-sensor-cells": + enum: + - 0 + - 1 + +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun50i-h6-ths + + then: + properties: + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + else: + properties: + clocks: + minItems: 2 + + clock-names: + minItems: 2 + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-h3-ths + + then: + properties: + "#thermal-sensor-cells": + const: 0 + + else: + properties: + "#thermal-sensor-cells": + const: 1 + + - if: + properties: + compatible: + contains: + enum: + - const: allwinner,sun8i-h3-ths + - const: allwinner,sun8i-r40-ths + - const: allwinner,sun50i-a64-ths + - const: allwinner,sun50i-h5-ths + - const: allwinner,sun50i-h6-ths + + then: + required: + - clocks + - clock-names + - resets + +required: + - compatible + - reg + - interrupts + - '#thermal-sensor-cells' + +additionalProperties: false + +examples: + - | + thermal-sensor@1f04000 { + compatible = "allwinner,sun8i-a83t-ths"; + reg = <0x01f04000 0x100>; + interrupts = <0 31 0>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + + - | + thermal-sensor@1c25000 { + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x400>; + clocks = <&ccu 0>, <&ccu 1>; + clock-names = "bus", "mod"; + resets = <&ccu 2>; + interrupts = <0 31 0>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <0>; + }; + + - | + thermal-sensor@5070400 { + compatible = "allwinner,sun50i-h6-ths"; + reg = <0x05070400 0x100>; + clocks = <&ccu 0>; + clock-names = "bus"; + resets = <&ccu 2>; + interrupts = <0 15 0>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml new file mode 100644 index 000000000000..d9fdf4809a49 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/brcm,avs-ro-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom AVS ring oscillator thermal + +maintainers: + - Stefan Wahren <wahrenst@gmx.net> + +description: |+ + The thermal node should be the child of a syscon node with the + required property: + + - compatible: Should be one of the following: + "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd" + + Refer to the the bindings described in + Documentation/devicetree/bindings/mfd/syscon.txt + +properties: + compatible: + const: brcm,bcm2711-thermal + + # See ./thermal.txt for details + "#thermal-sensor-cells": + const: 0 + +required: + - compatible + - '#thermal-sensor-cells' + +additionalProperties: false + +examples: + - | + avs-monitor@7d5d2000 { + compatible = "brcm,bcm2711-avs-monitor", + "syscon", "simple-mfd"; + reg = <0x7d5d2000 0xf00>; + + thermal: thermal { + compatible = "brcm,bcm2711-thermal"; + #thermal-sensor-cells = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt index 43a9ed545944..74a9ef09db8b 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt @@ -3,9 +3,13 @@ Thermal management core, provided by the AVS TMON hardware block. Required properties: -- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445" +- compatible: must be one of: + "brcm,avs-tmon-bcm7216" + "brcm,avs-tmon-bcm7445" + "brcm,avs-tmon" - reg: address range for the AVS TMON registers -- interrupts: temperature monitor interrupt, for high/low threshold triggers +- interrupts: temperature monitor interrupt, for high/low threshold triggers, + required except for "brcm,avs-tmon-bcm7216" - interrupt-names: should be "tmon" Example: diff --git a/Documentation/driver-api/thermal/cpu-idle-cooling.rst b/Documentation/driver-api/thermal/cpu-idle-cooling.rst new file mode 100644 index 000000000000..e4f0859486c7 --- /dev/null +++ b/Documentation/driver-api/thermal/cpu-idle-cooling.rst @@ -0,0 +1,189 @@ + +Situation: +---------- + +Under certain circumstances a SoC can reach a critical temperature +limit and is unable to stabilize the temperature around a temperature +control. When the SoC has to stabilize the temperature, the kernel can +act on a cooling device to mitigate the dissipated power. When the +critical temperature is reached, a decision must be taken to reduce +the temperature, that, in turn impacts performance. + +Another situation is when the silicon temperature continues to +increase even after the dynamic leakage is reduced to its minimum by +clock gating the component. This runaway phenomenon can continue due +to the static leakage. The only solution is to power down the +component, thus dropping the dynamic and static leakage that will +allow the component to cool down. + +Last but not least, the system can ask for a specific power budget but +because of the OPP density, we can only choose an OPP with a power +budget lower than the requested one and under-utilize the CPU, thus +losing performance. In other words, one OPP under-utilizes the CPU +with a power less than the requested power budget and the next OPP +exceeds the power budget. An intermediate OPP could have been used if +it were present. + +Solutions: +---------- + +If we can remove the static and the dynamic leakage for a specific +duration in a controlled period, the SoC temperature will +decrease. Acting on the idle state duration or the idle cycle +injection period, we can mitigate the temperature by modulating the +power budget. + +The Operating Performance Point (OPP) density has a great influence on +the control precision of cpufreq, however different vendors have a +plethora of OPP density, and some have large power gap between OPPs, +that will result in loss of performance during thermal control and +loss of power in other scenarios. + +At a specific OPP, we can assume that injecting idle cycle on all CPUs +belong to the same cluster, with a duration greater than the cluster +idle state target residency, we lead to dropping the static and the +dynamic leakage for this period (modulo the energy needed to enter +this state). So the sustainable power with idle cycles has a linear +relation with the OPP’s sustainable power and can be computed with a +coefficient similar to: + + Power(IdleCycle) = Coef x Power(OPP) + +Idle Injection: +--------------- + +The base concept of the idle injection is to force the CPU to go to an +idle state for a specified time each control cycle, it provides +another way to control CPU power and heat in addition to +cpufreq. Ideally, if all CPUs belonging to the same cluster, inject +their idle cycles synchronously, the cluster can reach its power down +state with a minimum power consumption and reduce the static leakage +to almost zero. However, these idle cycles injection will add extra +latencies as the CPUs will have to wakeup from a deep sleep state. + +We use a fixed duration of idle injection that gives an acceptable +performance penalty and a fixed latency. Mitigation can be increased +or decreased by modulating the duty cycle of the idle injection. + + ^ + | + | + |------- ------- + |_______|_______________________|_______|___________ + + <------> + idle <----------------------> + running + + <-----------------------------> + duty cycle 25% + + +The implementation of the cooling device bases the number of states on +the duty cycle percentage. When no mitigation is happening the cooling +device state is zero, meaning the duty cycle is 0%. + +When the mitigation begins, depending on the governor's policy, a +starting state is selected. With a fixed idle duration and the duty +cycle (aka the cooling device state), the running duration can be +computed. + +The governor will change the cooling device state thus the duty cycle +and this variation will modulate the cooling effect. + + ^ + | + | + |------- ------- + |_______|_______________|_______|___________ + + <------> + idle <--------------> + running + + <-----------------------------> + duty cycle 33% + + + ^ + | + | + |------- ------- + |_______|_______|_______|___________ + + <------> + idle <------> + running + + <-------------> + duty cycle 50% + +The idle injection duration value must comply with the constraints: + +- It is less than or equal to the latency we tolerate when the + mitigation begins. It is platform dependent and will depend on the + user experience, reactivity vs performance trade off we want. This + value should be specified. + +- It is greater than the idle state’s target residency we want to go + for thermal mitigation, otherwise we end up consuming more energy. + +Power considerations +-------------------- + +When we reach the thermal trip point, we have to sustain a specified +power for a specific temperature but at this time we consume: + + Power = Capacitance x Voltage^2 x Frequency x Utilisation + +... which is more than the sustainable power (or there is something +wrong in the system setup). The ‘Capacitance’ and ‘Utilisation’ are a +fixed value, ‘Voltage’ and the ‘Frequency’ are fixed artificially +because we don’t want to change the OPP. We can group the +‘Capacitance’ and the ‘Utilisation’ into a single term which is the +‘Dynamic Power Coefficient (Cdyn)’ Simplifying the above, we have: + + Pdyn = Cdyn x Voltage^2 x Frequency + +The power allocator governor will ask us somehow to reduce our power +in order to target the sustainable power defined in the device +tree. So with the idle injection mechanism, we want an average power +(Ptarget) resulting in an amount of time running at full power on a +specific OPP and idle another amount of time. That could be put in a +equation: + + P(opp)target = ((Trunning x (P(opp)running) + (Tidle x P(opp)idle)) / + (Trunning + Tidle) + ... + + Tidle = Trunning x ((P(opp)running / P(opp)target) - 1) + +At this point if we know the running period for the CPU, that gives us +the idle injection we need. Alternatively if we have the idle +injection duration, we can compute the running duration with: + + Trunning = Tidle / ((P(opp)running / P(opp)target) - 1) + +Practically, if the running power is less than the targeted power, we +end up with a negative time value, so obviously the equation usage is +bound to a power reduction, hence a higher OPP is needed to have the +running power greater than the targeted power. + +However, in this demonstration we ignore three aspects: + + * The static leakage is not defined here, we can introduce it in the + equation but assuming it will be zero most of the time as it is + difficult to get the values from the SoC vendors + + * The idle state wake up latency (or entry + exit latency) is not + taken into account, it must be added in the equation in order to + rigorously compute the idle injection + + * The injected idle duration must be greater than the idle state + target residency, otherwise we end up consuming more energy and + potentially invert the mitigation effect + +So the final equation is: + + Trunning = (Tidle - Twakeup ) x + (((P(opp)dyn + P(opp)static ) - P(opp)target) / P(opp)target ) diff --git a/Documentation/driver-api/thermal/exynos_thermal.rst b/Documentation/driver-api/thermal/exynos_thermal.rst index 5bd556566c70..764df4ab584d 100644 --- a/Documentation/driver-api/thermal/exynos_thermal.rst +++ b/Documentation/driver-api/thermal/exynos_thermal.rst @@ -4,7 +4,7 @@ Kernel driver exynos_tmu Supported chips: -* ARM SAMSUNG EXYNOS4, EXYNOS5 series of SoC +* ARM Samsung Exynos4, Exynos5 series of SoC Datasheet: Not publicly available @@ -14,7 +14,7 @@ Authors: Amit Daniel <amit.daniel@samsung.com> TMU controller Description: --------------------------- -This driver allows to read temperature inside SAMSUNG EXYNOS4/5 series of SoC. +This driver allows to read temperature inside Samsung Exynos4/5 series of SoC. The chip only exposes the measured 8-bit temperature code value through a register. @@ -43,7 +43,7 @@ The three equations are: Trimming info for 85 degree Celsius (stored at TRIMINFO register) Temperature code measured at 85 degree Celsius which is unchanged -TMU(Thermal Management Unit) in EXYNOS4/5 generates interrupt +TMU(Thermal Management Unit) in Exynos4/5 generates interrupt when temperature exceeds pre-defined levels. The maximum number of configurable threshold is five. The threshold levels are defined as follows:: @@ -67,7 +67,7 @@ TMU driver description: The exynos thermal driver is structured as:: Kernel Core thermal framework - (thermal_core.c, step_wise.c, cpu_cooling.c) + (thermal_core.c, step_wise.c, cpufreq_cooling.c) ^ | | diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst index 68c2bc8275cf..01e909245fcd 100644 --- a/Documentation/filesystems/fscrypt.rst +++ b/Documentation/filesystems/fscrypt.rst @@ -234,8 +234,8 @@ HKDF is more flexible, is nonreversible, and evenly distributes entropy from the master key. HKDF is also standardized and widely used by other software, whereas the AES-128-ECB based KDF is ad-hoc. -Per-file keys -------------- +Per-file encryption keys +------------------------ Since each master key can protect many files, it is necessary to "tweak" the encryption of each file so that the same plaintext in two @@ -268,9 +268,9 @@ is greater than that of an AES-256-XTS key. Therefore, to improve performance and save memory, for Adiantum a "direct key" configuration is supported. When the user has enabled this by setting FSCRYPT_POLICY_FLAG_DIRECT_KEY in the fscrypt policy, -per-file keys are not used. Instead, whenever any data (contents or -filenames) is encrypted, the file's 16-byte nonce is included in the -IV. Moreover: +per-file encryption keys are not used. Instead, whenever any data +(contents or filenames) is encrypted, the file's 16-byte nonce is +included in the IV. Moreover: - For v1 encryption policies, the encryption is done directly with the master key. Because of this, users **must not** use the same master @@ -302,6 +302,16 @@ For master keys used for v2 encryption policies, a unique 16-byte "key identifier" is also derived using the KDF. This value is stored in the clear, since it is needed to reliably identify the key itself. +Dirhash keys +------------ + +For directories that are indexed using a secret-keyed dirhash over the +plaintext filenames, the KDF is also used to derive a 128-bit +SipHash-2-4 key per directory in order to hash filenames. This works +just like deriving a per-file encryption key, except that a different +KDF context is used. Currently, only casefolded ("case-insensitive") +encrypted directories use this style of hashing. + Encryption modes and usage ========================== @@ -325,11 +335,11 @@ used. Adiantum is a (primarily) stream cipher-based mode that is fast even on CPUs without dedicated crypto instructions. It's also a true wide-block mode, unlike XTS. It can also eliminate the need to derive -per-file keys. However, it depends on the security of two primitives, -XChaCha12 and AES-256, rather than just one. See the paper -"Adiantum: length-preserving encryption for entry-level processors" -(https://eprint.iacr.org/2018/720.pdf) for more details. To use -Adiantum, CONFIG_CRYPTO_ADIANTUM must be enabled. Also, fast +per-file encryption keys. However, it depends on the security of two +primitives, XChaCha12 and AES-256, rather than just one. See the +paper "Adiantum: length-preserving encryption for entry-level +processors" (https://eprint.iacr.org/2018/720.pdf) for more details. +To use Adiantum, CONFIG_CRYPTO_ADIANTUM must be enabled. Also, fast implementations of ChaCha and NHPoly1305 should be enabled, e.g. CONFIG_CRYPTO_CHACHA20_NEON and CONFIG_CRYPTO_NHPOLY1305_NEON for ARM. @@ -513,7 +523,9 @@ FS_IOC_SET_ENCRYPTION_POLICY can fail with the following errors: - ``EEXIST``: the file is already encrypted with an encryption policy different from the one specified - ``EINVAL``: an invalid encryption policy was specified (invalid - version, mode(s), or flags; or reserved bits were set) + version, mode(s), or flags; or reserved bits were set); or a v1 + encryption policy was specified but the directory has the casefold + flag enabled (casefolding is incompatible with v1 policies). - ``ENOKEY``: a v2 encryption policy was specified, but the key with the specified ``master_key_identifier`` has not been added, nor does the process have the CAP_FOWNER capability in the initial user @@ -638,7 +650,8 @@ follows:: struct fscrypt_add_key_arg { struct fscrypt_key_specifier key_spec; __u32 raw_size; - __u32 __reserved[9]; + __u32 key_id; + __u32 __reserved[8]; __u8 raw[]; }; @@ -655,6 +668,12 @@ follows:: } u; }; + struct fscrypt_provisioning_key_payload { + __u32 type; + __u32 __reserved; + __u8 raw[]; + }; + :c:type:`struct fscrypt_add_key_arg` must be zeroed, then initialized as follows: @@ -677,9 +696,26 @@ as follows: ``Documentation/security/keys/core.rst``). - ``raw_size`` must be the size of the ``raw`` key provided, in bytes. + Alternatively, if ``key_id`` is nonzero, this field must be 0, since + in that case the size is implied by the specified Linux keyring key. + +- ``key_id`` is 0 if the raw key is given directly in the ``raw`` + field. Otherwise ``key_id`` is the ID of a Linux keyring key of + type "fscrypt-provisioning" whose payload is a :c:type:`struct + fscrypt_provisioning_key_payload` whose ``raw`` field contains the + raw key and whose ``type`` field matches ``key_spec.type``. Since + ``raw`` is variable-length, the total size of this key's payload + must be ``sizeof(struct fscrypt_provisioning_key_payload)`` plus the + raw key size. The process must have Search permission on this key. + + Most users should leave this 0 and specify the raw key directly. + The support for specifying a Linux keyring key is intended mainly to + allow re-adding keys after a filesystem is unmounted and re-mounted, + without having to store the raw keys in userspace memory. - ``raw`` is a variable-length field which must contain the actual - key, ``raw_size`` bytes long. + key, ``raw_size`` bytes long. Alternatively, if ``key_id`` is + nonzero, then this field is unused. For v2 policy keys, the kernel keeps track of which user (identified by effective user ID) added the key, and only allows the key to be @@ -701,11 +737,16 @@ FS_IOC_ADD_ENCRYPTION_KEY can fail with the following errors: - ``EACCES``: FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR was specified, but the caller does not have the CAP_SYS_ADMIN capability in the initial - user namespace + user namespace; or the raw key was specified by Linux key ID but the + process lacks Search permission on the key. - ``EDQUOT``: the key quota for this user would be exceeded by adding the key - ``EINVAL``: invalid key size or key specifier type, or reserved bits were set +- ``EKEYREJECTED``: the raw key was specified by Linux key ID, but the + key has the wrong type +- ``ENOKEY``: the raw key was specified by Linux key ID, but no key + exists with that ID - ``ENOTTY``: this type of filesystem does not implement encryption - ``EOPNOTSUPP``: the kernel was not configured with encryption support for this filesystem, or the filesystem superblock has not @@ -1108,8 +1149,8 @@ The context structs contain the same information as the corresponding policy structs (see `Setting an encryption policy`_), except that the context structs also contain a nonce. The nonce is randomly generated by the kernel and is used as KDF input or as a tweak to cause -different files to be encrypted differently; see `Per-file keys`_ and -`DIRECT_KEY policies`_. +different files to be encrypted differently; see `Per-file encryption +keys`_ and `DIRECT_KEY policies`_. Data path changes ----------------- @@ -1161,7 +1202,7 @@ filesystem-specific hash(es) needed for directory lookups. This allows the filesystem to still, with a high degree of confidence, map the filename given in ->lookup() back to a particular directory entry that was previously listed by readdir(). See :c:type:`struct -fscrypt_digested_name` in the source for more details. +fscrypt_nokey_name` in the source for more details. Note that the precise way that filenames are presented to userspace without the key is subject to change in the future. It is only meant diff --git a/Documentation/networking/device_drivers/index.rst b/Documentation/networking/device_drivers/index.rst index c1f7f75e5fd9..a191faaf97de 100644 --- a/Documentation/networking/device_drivers/index.rst +++ b/Documentation/networking/device_drivers/index.rst @@ -22,9 +22,11 @@ Contents: intel/iavf intel/ice google/gve + marvell/octeontx2 mellanox/mlx5 netronome/nfp pensando/ionic + stmicro/stmmac .. only:: subproject and html diff --git a/Documentation/networking/device_drivers/marvell/octeontx2.rst b/Documentation/networking/device_drivers/marvell/octeontx2.rst new file mode 100644 index 000000000000..88f508338c5f --- /dev/null +++ b/Documentation/networking/device_drivers/marvell/octeontx2.rst @@ -0,0 +1,159 @@ +.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +==================================== +Marvell OcteonTx2 RVU Kernel Drivers +==================================== + +Copyright (c) 2020 Marvell International Ltd. + +Contents +======== + +- `Overview`_ +- `Drivers`_ +- `Basic packet flow`_ + +Overview +======== + +Resource virtualization unit (RVU) on Marvell's OcteonTX2 SOC maps HW +resources from the network, crypto and other functional blocks into +PCI-compatible physical and virtual functions. Each functional block +again has multiple local functions (LFs) for provisioning to PCI devices. +RVU supports multiple PCIe SRIOV physical functions (PFs) and virtual +functions (VFs). PF0 is called the administrative / admin function (AF) +and has privileges to provision RVU functional block's LFs to each of the +PF/VF. + +RVU managed networking functional blocks + - Network pool or buffer allocator (NPA) + - Network interface controller (NIX) + - Network parser CAM (NPC) + - Schedule/Synchronize/Order unit (SSO) + - Loopback interface (LBK) + +RVU managed non-networking functional blocks + - Crypto accelerator (CPT) + - Scheduled timers unit (TIM) + - Schedule/Synchronize/Order unit (SSO) + Used for both networking and non networking usecases + +Resource provisioning examples + - A PF/VF with NIX-LF & NPA-LF resources works as a pure network device + - A PF/VF with CPT-LF resource works as a pure crypto offload device. + +RVU functional blocks are highly configurable as per software requirements. + +Firmware setups following stuff before kernel boots + - Enables required number of RVU PFs based on number of physical links. + - Number of VFs per PF are either static or configurable at compile time. + Based on config, firmware assigns VFs to each of the PFs. + - Also assigns MSIX vectors to each of PF and VFs. + - These are not changed after kernel boot. + +Drivers +======= + +Linux kernel will have multiple drivers registering to different PF and VFs +of RVU. Wrt networking there will be 3 flavours of drivers. + +Admin Function driver +--------------------- + +As mentioned above RVU PF0 is called the admin function (AF), this driver +supports resource provisioning and configuration of functional blocks. +Doesn't handle any I/O. It sets up few basic stuff but most of the +funcionality is achieved via configuration requests from PFs and VFs. + +PF/VFs communicates with AF via a shared memory region (mailbox). Upon +receiving requests AF does resource provisioning and other HW configuration. +AF is always attached to host kernel, but PFs and their VFs may be used by host +kernel itself, or attached to VMs or to userspace applications like +DPDK etc. So AF has to handle provisioning/configuration requests sent +by any device from any domain. + +AF driver also interacts with underlying firmware to + - Manage physical ethernet links ie CGX LMACs. + - Retrieve information like speed, duplex, autoneg etc + - Retrieve PHY EEPROM and stats. + - Configure FEC, PAM modes + - etc + +From pure networking side AF driver supports following functionality. + - Map a physical link to a RVU PF to which a netdev is registered. + - Attach NIX and NPA block LFs to RVU PF/VF which provide buffer pools, RQs, SQs + for regular networking functionality. + - Flow control (pause frames) enable/disable/config. + - HW PTP timestamping related config. + - NPC parser profile config, basically how to parse pkt and what info to extract. + - NPC extract profile config, what to extract from the pkt to match data in MCAM entries. + - Manage NPC MCAM entries, upon request can frame and install requested packet forwarding rules. + - Defines receive side scaling (RSS) algorithms. + - Defines segmentation offload algorithms (eg TSO) + - VLAN stripping, capture and insertion config. + - SSO and TIM blocks config which provide packet scheduling support. + - Debugfs support, to check current resource provising, current status of + NPA pools, NIX RQ, SQ and CQs, various stats etc which helps in debugging issues. + - And many more. + +Physical Function driver +------------------------ + +This RVU PF handles IO, is mapped to a physical ethernet link and this +driver registers a netdev. This supports SR-IOV. As said above this driver +communicates with AF with a mailbox. To retrieve information from physical +links this driver talks to AF and AF gets that info from firmware and responds +back ie cannot talk to firmware directly. + +Supports ethtool for configuring links, RSS, queue count, queue size, +flow control, ntuple filters, dump PHY EEPROM, config FEC etc. + +Virtual Function driver +----------------------- + +There are two types VFs, VFs that share the physical link with their parent +SR-IOV PF and the VFs which work in pairs using internal HW loopback channels (LBK). + +Type1: + - These VFs and their parent PF share a physical link and used for outside communication. + - VFs cannot communicate with AF directly, they send mbox message to PF and PF + forwards that to AF. AF after processing, responds back to PF and PF forwards + the reply to VF. + - From functionality point of view there is no difference between PF and VF as same type + HW resources are attached to both. But user would be able to configure few stuff only + from PF as PF is treated as owner/admin of the link. + +Type2: + - RVU PF0 ie admin function creates these VFs and maps them to loopback block's channels. + - A set of two VFs (VF0 & VF1, VF2 & VF3 .. so on) works as a pair ie pkts sent out of + VF0 will be received by VF1 and viceversa. + - These VFs can be used by applications or virtual machines to communicate between them + without sending traffic outside. There is no switch present in HW, hence the support + for loopback VFs. + - These communicate directly with AF (PF0) via mbox. + +Except for the IO channels or links used for packet reception and transmission there is +no other difference between these VF types. AF driver takes care of IO channel mapping, +hence same VF driver works for both types of devices. + +Basic packet flow +================= + +Ingress +------- + +1. CGX LMAC receives packet. +2. Forwards the packet to the NIX block. +3. Then submitted to NPC block for parsing and then MCAM lookup to get the destination RVU device. +4. NIX LF attached to the destination RVU device allocates a buffer from RQ mapped buffer pool of NPA block LF. +5. RQ may be selected by RSS or by configuring MCAM rule with a RQ number. +6. Packet is DMA'ed and driver is notified. + +Egress +------ + +1. Driver prepares a send descriptor and submits to SQ for transmission. +2. The SQ is already configured (by AF) to transmit on a specific link/channel. +3. The SQ descriptor ring is maintained in buffers allocated from SQ mapped pool of NPA block LF. +4. NIX block transmits the pkt on the designated channel. +5. NPC MCAM entries can be installed to divert pkt onto a different channel. diff --git a/Documentation/networking/device_drivers/microsoft/netvsc.txt b/Documentation/networking/device_drivers/microsoft/netvsc.txt index 3bfa635bbbd5..cd63556b27a0 100644 --- a/Documentation/networking/device_drivers/microsoft/netvsc.txt +++ b/Documentation/networking/device_drivers/microsoft/netvsc.txt @@ -82,3 +82,24 @@ Features contain one or more packets. The send buffer is an optimization, the driver will use slower method to handle very large packets or if the send buffer area is exhausted. + + XDP support + ----------- + XDP (eXpress Data Path) is a feature that runs eBPF bytecode at the early + stage when packets arrive at a NIC card. The goal is to increase performance + for packet processing, reducing the overhead of SKB allocation and other + upper network layers. + + hv_netvsc supports XDP in native mode, and transparently sets the XDP + program on the associated VF NIC as well. + + Setting / unsetting XDP program on synthetic NIC (netvsc) propagates to + VF NIC automatically. Setting / unsetting XDP program on VF NIC directly + is not recommended, also not propagated to synthetic NIC, and may be + overwritten by setting of synthetic NIC. + + XDP program cannot run with LRO (RSC) enabled, so you need to disable LRO + before running XDP: + ethtool -K eth0 lro off + + XDP_REDIRECT action is not yet supported. diff --git a/Documentation/networking/device_drivers/netronome/nfp.rst b/Documentation/networking/device_drivers/netronome/nfp.rst index 6c08ac8b5147..ada611fb427c 100644 --- a/Documentation/networking/device_drivers/netronome/nfp.rst +++ b/Documentation/networking/device_drivers/netronome/nfp.rst @@ -131,3 +131,119 @@ abi_drv_reset abi_drv_load_ifc Defines a list of PF devices allowed to load FW on the device. This variable is not currently user configurable. + +Statistics +========== + +Following device statistics are available through the ``ethtool -S`` interface: + +.. flat-table:: NFP device statistics + :header-rows: 1 + :widths: 3 1 11 + + * - Name + - ID + - Meaning + + * - dev_rx_discards + - 1 + - Packet can be discarded on the RX path for one of the following reasons: + + * The NIC is not in promisc mode, and the destination MAC address + doesn't match the interfaces' MAC address. + * The received packet is larger than the max buffer size on the host. + I.e. it exceeds the Layer 3 MRU. + * There is no freelist descriptor available on the host for the packet. + It is likely that the NIC couldn't cache one in time. + * A BPF program discarded the packet. + * The datapath drop action was executed. + * The MAC discarded the packet due to lack of ingress buffer space + on the NIC. + + * - dev_rx_errors + - 2 + - A packet can be counted (and dropped) as RX error for the following + reasons: + + * A problem with the VEB lookup (only when SR-IOV is used). + * A physical layer problem that causes Ethernet errors, like FCS or + alignment errors. The cause is usually faulty cables or SFPs. + + * - dev_rx_bytes + - 3 + - Total number of bytes received. + + * - dev_rx_uc_bytes + - 4 + - Unicast bytes received. + + * - dev_rx_mc_bytes + - 5 + - Multicast bytes received. + + * - dev_rx_bc_bytes + - 6 + - Broadcast bytes received. + + * - dev_rx_pkts + - 7 + - Total number of packets received. + + * - dev_rx_mc_pkts + - 8 + - Multicast packets received. + + * - dev_rx_bc_pkts + - 9 + - Broadcast packets received. + + * - dev_tx_discards + - 10 + - A packet can be discarded in the TX direction if the MAC is + being flow controlled and the NIC runs out of TX queue space. + + * - dev_tx_errors + - 11 + - A packet can be counted as TX error (and dropped) for one for the + following reasons: + + * The packet is an LSO segment, but the Layer 3 or Layer 4 offset + could not be determined. Therefore LSO could not continue. + * An invalid packet descriptor was received over PCIe. + * The packet Layer 3 length exceeds the device MTU. + * An error on the MAC/physical layer. Usually due to faulty cables or + SFPs. + * A CTM buffer could not be allocated. + * The packet offset was incorrect and could not be fixed by the NIC. + + * - dev_tx_bytes + - 12 + - Total number of bytes transmitted. + + * - dev_tx_uc_bytes + - 13 + - Unicast bytes transmitted. + + * - dev_tx_mc_bytes + - 14 + - Multicast bytes transmitted. + + * - dev_tx_bc_bytes + - 15 + - Broadcast bytes transmitted. + + * - dev_tx_pkts + - 16 + - Total number of packets transmitted. + + * - dev_tx_mc_pkts + - 17 + - Multicast packets transmitted. + + * - dev_tx_bc_pkts + - 18 + - Broadcast packets transmitted. + +Note that statistics unknown to the driver will be displayed as +``dev_unknown_stat$ID``, where ``$ID`` refers to the second column +above. diff --git a/Documentation/networking/device_drivers/stmicro/stmmac.rst b/Documentation/networking/device_drivers/stmicro/stmmac.rst new file mode 100644 index 000000000000..c34bab3d2df0 --- /dev/null +++ b/Documentation/networking/device_drivers/stmicro/stmmac.rst @@ -0,0 +1,697 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +============================================================== +Linux Driver for the Synopsys(R) Ethernet Controllers "stmmac" +============================================================== + +Authors: Giuseppe Cavallaro <peppe.cavallaro@st.com>, +Alexandre Torgue <alexandre.torgue@st.com>, Jose Abreu <joabreu@synopsys.com> + +Contents +======== + +- In This Release +- Feature List +- Kernel Configuration +- Command Line Parameters +- Driver Information and Notes +- Debug Information +- Support + +In This Release +=============== + +This file describes the stmmac Linux Driver for all the Synopsys(R) Ethernet +Controllers. + +Currently, this network device driver is for all STi embedded MAC/GMAC +(i.e. 7xxx/5xxx SoCs), SPEAr (arm), Loongson1B (mips) and XILINX XC2V3000 +FF1152AMT0221 D1215994A VIRTEX FPGA board. The Synopsys Ethernet QoS 5.0 IPK +is also supported. + +DesignWare(R) Cores Ethernet MAC 10/100/1000 Universal version 3.70a +(and older) and DesignWare(R) Cores Ethernet Quality-of-Service version 4.0 +(and upper) have been used for developing this driver as well as +DesignWare(R) Cores XGMAC - 10G Ethernet MAC. + +This driver supports both the platform bus and PCI. + +This driver includes support for the following Synopsys(R) DesignWare(R) +Cores Ethernet Controllers and corresponding minimum and maximum versions: + ++-------------------------------+--------------+--------------+--------------+ +| Controller Name | Min. Version | Max. Version | Abbrev. Name | ++===============================+==============+==============+==============+ +| Ethernet MAC Universal | N/A | 3.73a | GMAC | ++-------------------------------+--------------+--------------+--------------+ +| Ethernet Quality-of-Service | 4.00a | N/A | GMAC4+ | ++-------------------------------+--------------+--------------+--------------+ +| XGMAC - 10G Ethernet MAC | 2.10a | N/A | XGMAC2+ | ++-------------------------------+--------------+--------------+--------------+ + +For questions related to hardware requirements, refer to the documentation +supplied with your Ethernet adapter. All hardware requirements listed apply +to use with Linux. + +Feature List +============ + +The following features are available in this driver: + - GMII/MII/RGMII/SGMII/RMII/XGMII Interface + - Half-Duplex / Full-Duplex Operation + - Energy Efficient Ethernet (EEE) + - IEEE 802.3x PAUSE Packets (Flow Control) + - RMON/MIB Counters + - IEEE 1588 Timestamping (PTP) + - Pulse-Per-Second Output (PPS) + - MDIO Clause 22 / Clause 45 Interface + - MAC Loopback + - ARP Offloading + - Automatic CRC / PAD Insertion and Checking + - Checksum Offload for Received and Transmitted Packets + - Standard or Jumbo Ethernet Packets + - Source Address Insertion / Replacement + - VLAN TAG Insertion / Replacement / Deletion / Filtering (HASH and PERFECT) + - Programmable TX and RX Watchdog and Coalesce Settings + - Destination Address Filtering (PERFECT) + - HASH Filtering (Multicast) + - Layer 3 / Layer 4 Filtering + - Remote Wake-Up Detection + - Receive Side Scaling (RSS) + - Frame Preemption for TX and RX + - Programmable Burst Length, Threshold, Queue Size + - Multiple Queues (up to 8) + - Multiple Scheduling Algorithms (TX: WRR, DWRR, WFQ, SP, CBS, EST, TBS; + RX: WRR, SP) + - Flexible RX Parser + - TCP / UDP Segmentation Offload (TSO, USO) + - Split Header (SPH) + - Safety Features (ECC Protection, Data Parity Protection) + - Selftests using Ethtool + +Kernel Configuration +==================== + +The kernel configuration option is ``CONFIG_STMMAC_ETH``: + - ``CONFIG_STMMAC_PLATFORM``: is to enable the platform driver. + - ``CONFIG_STMMAC_PCI``: is to enable the pci driver. + +Command Line Parameters +======================= + +If the driver is built as a module the following optional parameters are used +by entering them on the command line with the modprobe command using this +syntax (e.g. for PCI module):: + + modprobe stmmac_pci [<option>=<VAL1>,<VAL2>,...] + +Driver parameters can be also passed in command line by using:: + + stmmaceth=watchdog:100,chain_mode=1 + +The default value for each parameter is generally the recommended setting, +unless otherwise noted. + +watchdog +-------- +:Valid Range: 5000-None +:Default Value: 5000 + +This parameter overrides the transmit timeout in milliseconds. + +debug +----- +:Valid Range: 0-16 (0=none,...,16=all) +:Default Value: 0 + +This parameter adjusts the level of debug messages displayed in the system +logs. + +phyaddr +------- +:Valid Range: 0-31 +:Default Value: -1 + +This parameter overrides the physical address of the PHY device. + +flow_ctrl +--------- +:Valid Range: 0-3 (0=off,1=rx,2=tx,3=rx/tx) +:Default Value: 3 + +This parameter changes the default Flow Control ability. + +pause +----- +:Valid Range: 0-65535 +:Default Value: 65535 + +This parameter changes the default Flow Control Pause time. + +tc +-- +:Valid Range: 64-256 +:Default Value: 64 + +This parameter changes the default HW FIFO Threshold control value. + +buf_sz +------ +:Valid Range: 1536-16384 +:Default Value: 1536 + +This parameter changes the default RX DMA packet buffer size. + +eee_timer +--------- +:Valid Range: 0-None +:Default Value: 1000 + +This parameter changes the default LPI TX Expiration time in milliseconds. + +chain_mode +---------- +:Valid Range: 0-1 (0=off,1=on) +:Default Value: 0 + +This parameter changes the default mode of operation from Ring Mode to +Chain Mode. + +Driver Information and Notes +============================ + +Transmit Process +---------------- + +The xmit method is invoked when the kernel needs to transmit a packet; it sets +the descriptors in the ring and informs the DMA engine that there is a packet +ready to be transmitted. + +By default, the driver sets the ``NETIF_F_SG`` bit in the features field of +the ``net_device`` structure, enabling the scatter-gather feature. This is +true on chips and configurations where the checksum can be done in hardware. + +Once the controller has finished transmitting the packet, timer will be +scheduled to release the transmit resources. + +Receive Process +--------------- + +When one or more packets are received, an interrupt happens. The interrupts +are not queued, so the driver has to scan all the descriptors in the ring +during the receive process. + +This is based on NAPI, so the interrupt handler signals only if there is work +to be done, and it exits. Then the poll method will be scheduled at some +future point. + +The incoming packets are stored, by the DMA, in a list of pre-allocated socket +buffers in order to avoid the memcpy (zero-copy). + +Interrupt Mitigation +-------------------- + +The driver is able to mitigate the number of its DMA interrupts using NAPI for +the reception on chips older than the 3.50. New chips have an HW RX Watchdog +used for this mitigation. + +Mitigation parameters can be tuned by ethtool. + +WoL +--- + +Wake up on Lan feature through Magic and Unicast frames are supported for the +GMAC, GMAC4/5 and XGMAC core. + +DMA Descriptors +--------------- + +Driver handles both normal and alternate descriptors. The latter has been only +tested on DesignWare(R) Cores Ethernet MAC Universal version 3.41a and later. + +stmmac supports DMA descriptor to operate both in dual buffer (RING) and +linked-list(CHAINED) mode. In RING each descriptor points to two data buffer +pointers whereas in CHAINED mode they point to only one data buffer pointer. +RING mode is the default. + +In CHAINED mode each descriptor will have pointer to next descriptor in the +list, hence creating the explicit chaining in the descriptor itself, whereas +such explicit chaining is not possible in RING mode. + +Extended Descriptors +-------------------- + +The extended descriptors give us information about the Ethernet payload when +it is carrying PTP packets or TCP/UDP/ICMP over IP. These are not available on +GMAC Synopsys(R) chips older than the 3.50. At probe time the driver will +decide if these can be actually used. This support also is mandatory for PTPv2 +because the extra descriptors are used for saving the hardware timestamps and +Extended Status. + +Ethtool Support +--------------- + +Ethtool is supported. For example, driver statistics (including RMON), +internal errors can be taken using:: + + ethtool -S ethX + +Ethtool selftests are also supported. This allows to do some early sanity +checks to the HW using MAC and PHY loopback mechanisms:: + + ethtool -t ethX + +Jumbo and Segmentation Offloading +--------------------------------- + +Jumbo frames are supported and tested for the GMAC. The GSO has been also +added but it's performed in software. LRO is not supported. + +TSO Support +----------- + +TSO (TCP Segmentation Offload) feature is supported by GMAC > 4.x and XGMAC +chip family. When a packet is sent through TCP protocol, the TCP stack ensures +that the SKB provided to the low level driver (stmmac in our case) matches +with the maximum frame len (IP header + TCP header + payload <= 1500 bytes +(for MTU set to 1500)). It means that if an application using TCP want to send +a packet which will have a length (after adding headers) > 1514 the packet +will be split in several TCP packets: The data payload is split and headers +(TCP/IP ..) are added. It is done by software. + +When TSO is enabled, the TCP stack doesn't care about the maximum frame length +and provide SKB packet to stmmac as it is. The GMAC IP will have to perform +the segmentation by it self to match with maximum frame length. + +This feature can be enabled in device tree through ``snps,tso`` entry. + +Energy Efficient Ethernet +------------------------- + +Energy Efficient Ethernet (EEE) enables IEEE 802.3 MAC sublayer along with a +family of Physical layer to operate in the Low Power Idle (LPI) mode. The EEE +mode supports the IEEE 802.3 MAC operation at 100Mbps, 1000Mbps and 1Gbps. + +The LPI mode allows power saving by switching off parts of the communication +device functionality when there is no data to be transmitted & received. +The system on both the side of the link can disable some functionalities and +save power during the period of low-link utilization. The MAC controls whether +the system should enter or exit the LPI mode and communicate this to PHY. + +As soon as the interface is opened, the driver verifies if the EEE can be +supported. This is done by looking at both the DMA HW capability register and +the PHY devices MCD registers. + +To enter in TX LPI mode the driver needs to have a software timer that enable +and disable the LPI mode when there is nothing to be transmitted. + +Precision Time Protocol (PTP) +----------------------------- + +The driver supports the IEEE 1588-2002, Precision Time Protocol (PTP), which +enables precise synchronization of clocks in measurement and control systems +implemented with technologies such as network communication. + +In addition to the basic timestamp features mentioned in IEEE 1588-2002 +Timestamps, new GMAC cores support the advanced timestamp features. +IEEE 1588-2008 can be enabled when configuring the Kernel. + +SGMII/RGMII Support +------------------- + +New GMAC devices provide own way to manage RGMII/SGMII. This information is +available at run-time by looking at the HW capability register. This means +that the stmmac can manage auto-negotiation and link status w/o using the +PHYLIB stuff. In fact, the HW provides a subset of extended registers to +restart the ANE, verify Full/Half duplex mode and Speed. Thanks to these +registers, it is possible to look at the Auto-negotiated Link Parter Ability. + +Physical +-------- + +The driver is compatible with Physical Abstraction Layer to be connected with +PHY and GPHY devices. + +Platform Information +-------------------- + +Several information can be passed through the platform and device-tree. + +:: + + struct plat_stmmacenet_data { + +1) Bus identifier:: + + int bus_id; + +2) PHY Physical Address. If set to -1 the driver will pick the first PHY it +finds:: + + int phy_addr; + +3) PHY Device Interface:: + + int interface; + +4) Specific platform fields for the MDIO bus:: + + struct stmmac_mdio_bus_data *mdio_bus_data; + +5) Internal DMA parameters:: + + struct stmmac_dma_cfg *dma_cfg; + +6) Fixed CSR Clock Range selection:: + + int clk_csr; + +7) HW uses the GMAC core:: + + int has_gmac; + +8) If set the MAC will use Enhanced Descriptors:: + + int enh_desc; + +9) Core is able to perform TX Checksum and/or RX Checksum in HW:: + + int tx_coe; + int rx_coe; + +11) Some HWs are not able to perform the csum in HW for over-sized frames due +to limited buffer sizes. Setting this flag the csum will be done in SW on +JUMBO frames:: + + int bugged_jumbo; + +12) Core has the embedded power module:: + + int pmt; + +13) Force DMA to use the Store and Forward mode or Threshold mode:: + + int force_sf_dma_mode; + int force_thresh_dma_mode; + +15) Force to disable the RX Watchdog feature and switch to NAPI mode:: + + int riwt_off; + +16) Limit the maximum operating speed and MTU:: + + int max_speed; + int maxmtu; + +18) Number of Multicast/Unicast filters:: + + int multicast_filter_bins; + int unicast_filter_entries; + +20) Limit the maximum TX and RX FIFO size:: + + int tx_fifo_size; + int rx_fifo_size; + +21) Use the specified number of TX and RX Queues:: + + u32 rx_queues_to_use; + u32 tx_queues_to_use; + +22) Use the specified TX and RX scheduling algorithm:: + + u8 rx_sched_algorithm; + u8 tx_sched_algorithm; + +23) Internal TX and RX Queue parameters:: + + struct stmmac_rxq_cfg rx_queues_cfg[MTL_MAX_RX_QUEUES]; + struct stmmac_txq_cfg tx_queues_cfg[MTL_MAX_TX_QUEUES]; + +24) This callback is used for modifying some syscfg registers (on ST SoCs) +according to the link speed negotiated by the physical layer:: + + void (*fix_mac_speed)(void *priv, unsigned int speed); + +25) Callbacks used for calling a custom initialization; This is sometimes +necessary on some platforms (e.g. ST boxes) where the HW needs to have set +some PIO lines or system cfg registers. init/exit callbacks should not use +or modify platform data:: + + int (*init)(struct platform_device *pdev, void *priv); + void (*exit)(struct platform_device *pdev, void *priv); + +26) Perform HW setup of the bus. For example, on some ST platforms this field +is used to configure the AMBA bridge to generate more efficient STBus traffic:: + + struct mac_device_info *(*setup)(void *priv); + void *bsp_priv; + +27) Internal clocks and rates:: + + struct clk *stmmac_clk; + struct clk *pclk; + struct clk *clk_ptp_ref; + unsigned int clk_ptp_rate; + unsigned int clk_ref_rate; + s32 ptp_max_adj; + +28) Main reset:: + + struct reset_control *stmmac_rst; + +29) AXI Internal Parameters:: + + struct stmmac_axi *axi; + +30) HW uses GMAC>4 cores:: + + int has_gmac4; + +31) HW is sun8i based:: + + bool has_sun8i; + +32) Enables TSO feature:: + + bool tso_en; + +33) Enables Receive Side Scaling (RSS) feature:: + + int rss_en; + +34) MAC Port selection:: + + int mac_port_sel_speed; + +35) Enables TX LPI Clock Gating:: + + bool en_tx_lpi_clockgating; + +36) HW uses XGMAC>2.10 cores:: + + int has_xgmac; + +:: + + } + +For MDIO bus data, we have: + +:: + + struct stmmac_mdio_bus_data { + +1) PHY mask passed when MDIO bus is registered:: + + unsigned int phy_mask; + +2) List of IRQs, one per PHY:: + + int *irqs; + +3) If IRQs is NULL, use this for probed PHY:: + + int probed_phy_irq; + +4) Set to true if PHY needs reset:: + + bool needs_reset; + +:: + + } + +For DMA engine configuration, we have: + +:: + + struct stmmac_dma_cfg { + +1) Programmable Burst Length (TX and RX):: + + int pbl; + +2) If set, DMA TX / RX will use this value rather than pbl:: + + int txpbl; + int rxpbl; + +3) Enable 8xPBL:: + + bool pblx8; + +4) Enable Fixed or Mixed burst:: + + int fixed_burst; + int mixed_burst; + +5) Enable Address Aligned Beats:: + + bool aal; + +6) Enable Enhanced Addressing (> 32 bits):: + + bool eame; + +:: + + } + +For DMA AXI parameters, we have: + +:: + + struct stmmac_axi { + +1) Enable AXI LPI:: + + bool axi_lpi_en; + bool axi_xit_frm; + +2) Set AXI Write / Read maximum outstanding requests:: + + u32 axi_wr_osr_lmt; + u32 axi_rd_osr_lmt; + +3) Set AXI 4KB bursts:: + + bool axi_kbbe; + +4) Set AXI maximum burst length map:: + + u32 axi_blen[AXI_BLEN]; + +5) Set AXI Fixed burst / mixed burst:: + + bool axi_fb; + bool axi_mb; + +6) Set AXI rebuild incrx mode:: + + bool axi_rb; + +:: + + } + +For the RX Queues configuration, we have: + +:: + + struct stmmac_rxq_cfg { + +1) Mode to use (DCB or AVB):: + + u8 mode_to_use; + +2) DMA channel to use:: + + u32 chan; + +3) Packet routing, if applicable:: + + u8 pkt_route; + +4) Use priority routing, and priority to route:: + + bool use_prio; + u32 prio; + +:: + + } + +For the TX Queues configuration, we have: + +:: + + struct stmmac_txq_cfg { + +1) Queue weight in scheduler:: + + u32 weight; + +2) Mode to use (DCB or AVB):: + + u8 mode_to_use; + +3) Credit Base Shaper Parameters:: + + u32 send_slope; + u32 idle_slope; + u32 high_credit; + u32 low_credit; + +4) Use priority scheduling, and priority:: + + bool use_prio; + u32 prio; + +:: + + } + +Device Tree Information +----------------------- + +Please refer to the following document: +Documentation/devicetree/bindings/net/snps,dwmac.yaml + +HW Capabilities +--------------- + +Note that, starting from new chips, where it is available the HW capability +register, many configurations are discovered at run-time for example to +understand if EEE, HW csum, PTP, enhanced descriptor etc are actually +available. As strategy adopted in this driver, the information from the HW +capability register can replace what has been passed from the platform. + +Debug Information +================= + +The driver exports many information i.e. internal statistics, debug +information, MAC and DMA registers etc. + +These can be read in several ways depending on the type of the information +actually needed. + +For example a user can be use the ethtool support to get statistics: e.g. +using: ``ethtool -S ethX`` (that shows the Management counters (MMC) if +supported) or sees the MAC/DMA registers: e.g. using: ``ethtool -d ethX`` + +Compiling the Kernel with ``CONFIG_DEBUG_FS`` the driver will export the +following debugfs entries: + + - ``descriptors_status``: To show the DMA TX/RX descriptor rings + - ``dma_cap``: To show the HW Capabilities + +Developer can also use the ``debug`` module parameter to get further debug +information (please see: NETIF Msg Level). + +Support +======= + +If an issue is identified with the released source code on a supported kernel +with a supported adapter, email the specific information related to the +issue to netdev@vger.kernel.org diff --git a/Documentation/networking/device_drivers/stmicro/stmmac.txt b/Documentation/networking/device_drivers/stmicro/stmmac.txt deleted file mode 100644 index 1ae979fd90d2..000000000000 --- a/Documentation/networking/device_drivers/stmicro/stmmac.txt +++ /dev/null @@ -1,401 +0,0 @@ - STMicroelectronics 10/100/1000 Synopsys Ethernet driver - -Copyright (C) 2007-2015 STMicroelectronics Ltd -Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> - -This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers -(Synopsys IP blocks). - -Currently this network device driver is for all STi embedded MAC/GMAC -(i.e. 7xxx/5xxx SoCs), SPEAr (arm), Loongson1B (mips) and XLINX XC2V3000 -FF1152AMT0221 D1215994A VIRTEX FPGA board. - -DWC Ether MAC 10/100/1000 Universal version 3.70a (and older) and DWC Ether -MAC 10/100 Universal version 4.0 have been used for developing this driver. - -This driver supports both the platform bus and PCI. - -Please, for more information also visit: www.stlinux.com - -1) Kernel Configuration -The kernel configuration option is STMMAC_ETH: - Device Drivers ---> Network device support ---> Ethernet (1000 Mbit) ---> - STMicroelectronics 10/100/1000 Ethernet driver (STMMAC_ETH) - -CONFIG_STMMAC_PLATFORM: is to enable the platform driver. -CONFIG_STMMAC_PCI: is to enable the pci driver. - -2) Driver parameters list: - debug: message level (0: no output, 16: all); - phyaddr: to manually provide the physical address to the PHY device; - buf_sz: DMA buffer size; - tc: control the HW FIFO threshold; - watchdog: transmit timeout (in milliseconds); - flow_ctrl: Flow control ability [on/off]; - pause: Flow Control Pause Time; - eee_timer: tx EEE timer; - chain_mode: select chain mode instead of ring. - -3) Command line options -Driver parameters can be also passed in command line by using: - stmmaceth=watchdog:100,chain_mode=1 - -4) Driver information and notes - -4.1) Transmit process -The xmit method is invoked when the kernel needs to transmit a packet; it sets -the descriptors in the ring and informs the DMA engine, that there is a packet -ready to be transmitted. -By default, the driver sets the NETIF_F_SG bit in the features field of the -net_device structure, enabling the scatter-gather feature. This is true on -chips and configurations where the checksum can be done in hardware. -Once the controller has finished transmitting the packet, timer will be -scheduled to release the transmit resources. - -4.2) Receive process -When one or more packets are received, an interrupt happens. The interrupts -are not queued, so the driver has to scan all the descriptors in the ring during -the receive process. -This is based on NAPI, so the interrupt handler signals only if there is work -to be done, and it exits. -Then the poll method will be scheduled at some future point. -The incoming packets are stored, by the DMA, in a list of pre-allocated socket -buffers in order to avoid the memcpy (zero-copy). - -4.3) Interrupt mitigation -The driver is able to mitigate the number of its DMA interrupts -using NAPI for the reception on chips older than the 3.50. -New chips have an HW RX-Watchdog used for this mitigation. -Mitigation parameters can be tuned by ethtool. - -4.4) WOL -Wake up on Lan feature through Magic and Unicast frames are supported for the -GMAC core. - -4.5) DMA descriptors -Driver handles both normal and alternate descriptors. The latter has been only -tested on DWC Ether MAC 10/100/1000 Universal version 3.41a and later. - -STMMAC supports DMA descriptor to operate both in dual buffer (RING) -and linked-list(CHAINED) mode. In RING each descriptor points to two -data buffer pointers whereas in CHAINED mode they point to only one data -buffer pointer. RING mode is the default. - -In CHAINED mode each descriptor will have pointer to next descriptor in -the list, hence creating the explicit chaining in the descriptor itself, -whereas such explicit chaining is not possible in RING mode. - -4.5.1) Extended descriptors -The extended descriptors give us information about the Ethernet payload -when it is carrying PTP packets or TCP/UDP/ICMP over IP. -These are not available on GMAC Synopsys chips older than the 3.50. -At probe time the driver will decide if these can be actually used. -This support also is mandatory for PTPv2 because the extra descriptors -are used for saving the hardware timestamps and Extended Status. - -4.6) Ethtool support -Ethtool is supported. - -For example, driver statistics (including RMON), internal errors can be taken -using: - # ethtool -S ethX -command - -4.7) Jumbo and Segmentation Offloading -Jumbo frames are supported and tested for the GMAC. -The GSO has been also added but it's performed in software. -LRO is not supported. - -4.8) Physical -The driver is compatible with Physical Abstraction Layer to be connected with -PHY and GPHY devices. - -4.9) Platform information -Several information can be passed through the platform and device-tree. - -struct plat_stmmacenet_data { - char *phy_bus_name; - int bus_id; - int phy_addr; - int interface; - struct stmmac_mdio_bus_data *mdio_bus_data; - struct stmmac_dma_cfg *dma_cfg; - int clk_csr; - int has_gmac; - int enh_desc; - int tx_coe; - int rx_coe; - int bugged_jumbo; - int pmt; - int force_sf_dma_mode; - int force_thresh_dma_mode; - int riwt_off; - int max_speed; - int maxmtu; - void (*fix_mac_speed)(void *priv, unsigned int speed); - void (*bus_setup)(void __iomem *ioaddr); - int (*init)(struct platform_device *pdev, void *priv); - void (*exit)(struct platform_device *pdev, void *priv); - void *bsp_priv; - int has_gmac4; - bool tso_en; -}; - -Where: - o phy_bus_name: phy bus name to attach to the stmmac. - o bus_id: bus identifier. - o phy_addr: the physical address can be passed from the platform. - If it is set to -1 the driver will automatically - detect it at run-time by probing all the 32 addresses. - o interface: PHY device's interface. - o mdio_bus_data: specific platform fields for the MDIO bus. - o dma_cfg: internal DMA parameters - o pbl: the Programmable Burst Length is maximum number of beats to - be transferred in one DMA transaction. - GMAC also enables the 4xPBL by default. (8xPBL for GMAC 3.50 and newer) - o txpbl/rxpbl: GMAC and newer supports independent DMA pbl for tx/rx. - o pblx8: Enable 8xPBL (4xPBL for core rev < 3.50). Enabled by default. - o fixed_burst/mixed_burst/aal - o clk_csr: fixed CSR Clock range selection. - o has_gmac: uses the GMAC core. - o enh_desc: if sets the MAC will use the enhanced descriptor structure. - o tx_coe: core is able to perform the tx csum in HW. - o rx_coe: the supports three check sum offloading engine types: - type_1, type_2 (full csum) and no RX coe. - o bugged_jumbo: some HWs are not able to perform the csum in HW for - over-sized frames due to limited buffer sizes. - Setting this flag the csum will be done in SW on - JUMBO frames. - o pmt: core has the embedded power module (optional). - o force_sf_dma_mode: force DMA to use the Store and Forward mode - instead of the Threshold. - o force_thresh_dma_mode: force DMA to use the Threshold mode other than - the Store and Forward mode. - o riwt_off: force to disable the RX watchdog feature and switch to NAPI mode. - o fix_mac_speed: this callback is used for modifying some syscfg registers - (on ST SoCs) according to the link speed negotiated by the - physical layer . - o bus_setup: perform HW setup of the bus. For example, on some ST platforms - this field is used to configure the AMBA bridge to generate more - efficient STBus traffic. - o init/exit: callbacks used for calling a custom initialization; - this is sometime necessary on some platforms (e.g. ST boxes) - where the HW needs to have set some PIO lines or system cfg - registers. init/exit callbacks should not use or modify - platform data. - o bsp_priv: another private pointer. - o has_gmac4: uses GMAC4 core. - o tso_en: Enables TSO (TCP Segmentation Offload) feature. - -For MDIO bus The we have: - - struct stmmac_mdio_bus_data { - int (*phy_reset)(void *priv); - unsigned int phy_mask; - int *irqs; - int probed_phy_irq; - }; - -Where: - o phy_reset: hook to reset the phy device attached to the bus. - o phy_mask: phy mask passed when register the MDIO bus within the driver. - o irqs: list of IRQs, one per PHY. - o probed_phy_irq: if irqs is NULL, use this for probed PHY. - -For DMA engine we have the following internal fields that should be -tuned according to the HW capabilities. - -struct stmmac_dma_cfg { - int pbl; - int txpbl; - int rxpbl; - bool pblx8; - int fixed_burst; - int mixed_burst; - bool aal; -}; - -Where: - o pbl: Programmable Burst Length (tx and rx) - o txpbl: Transmit Programmable Burst Length. Only for GMAC and newer. - If set, DMA tx will use this value rather than pbl. - o rxpbl: Receive Programmable Burst Length. Only for GMAC and newer. - If set, DMA rx will use this value rather than pbl. - o pblx8: Enable 8xPBL (4xPBL for core rev < 3.50). Enabled by default. - o fixed_burst: program the DMA to use the fixed burst mode - o mixed_burst: program the DMA to use the mixed burst mode - o aal: Address-Aligned Beats - ---- - -Below an example how the structures above are using on ST platforms. - - static struct plat_stmmacenet_data stxYYY_ethernet_platform_data = { - .has_gmac = 0, - .enh_desc = 0, - .fix_mac_speed = stxYYY_ethernet_fix_mac_speed, - | - |-> to write an internal syscfg - | on this platform when the - | link speed changes from 10 to - | 100 and viceversa - .init = &stmmac_claim_resource, - | - |-> On ST SoC this calls own "PAD" - | manager framework to claim - | all the resources necessary - | (GPIO ...). The .custom_cfg field - | is used to pass a custom config. -}; - -Below the usage of the stmmac_mdio_bus_data: on this SoC, in fact, -there are two MAC cores: one MAC is for MDIO Bus/PHY emulation -with fixed_link support. - -static struct stmmac_mdio_bus_data stmmac1_mdio_bus = { - .phy_reset = phy_reset; - | - |-> function to provide the phy_reset on this board - .phy_mask = 0, -}; - -static struct fixed_phy_status stmmac0_fixed_phy_status = { - .link = 1, - .speed = 100, - .duplex = 1, -}; - -During the board's device_init we can configure the first -MAC for fixed_link by calling: - fixed_phy_add(PHY_POLL, 1, &stmmac0_fixed_phy_status); -and the second one, with a real PHY device attached to the bus, -by using the stmmac_mdio_bus_data structure (to provide the id, the -reset procedure etc). - -Note that, starting from new chips, where it is available the HW capability -register, many configurations are discovered at run-time for example to -understand if EEE, HW csum, PTP, enhanced descriptor etc are actually -available. As strategy adopted in this driver, the information from the HW -capability register can replace what has been passed from the platform. - -4.10) Device-tree support. - -Please see the following document: - Documentation/devicetree/bindings/net/stmmac.txt - -4.11) This is a summary of the content of some relevant files: - o stmmac_main.c: implements the main network device driver; - o stmmac_mdio.c: provides MDIO functions; - o stmmac_pci: this is the PCI driver; - o stmmac_platform.c: this the platform driver (OF supported); - o stmmac_ethtool.c: implements the ethtool support; - o stmmac.h: private driver structure; - o common.h: common definitions and VFTs; - o mmc_core.c/mmc.h: Management MAC Counters; - o stmmac_hwtstamp.c: HW timestamp support for PTP; - o stmmac_ptp.c: PTP 1588 clock; - o stmmac_pcs.h: Physical Coding Sublayer common implementation; - o dwmac-<XXX>.c: these are for the platform glue-logic file; e.g. dwmac-sti.c - for STMicroelectronics SoCs. - -- GMAC 3.x - o descs.h: descriptor structure definitions; - o dwmac1000_core.c: dwmac GiGa core functions; - o dwmac1000_dma.c: dma functions for the GMAC chip; - o dwmac1000.h: specific header file for the dwmac GiGa; - o dwmac100_core: dwmac 100 core code; - o dwmac100_dma.c: dma functions for the dwmac 100 chip; - o dwmac1000.h: specific header file for the MAC; - o dwmac_lib.c: generic DMA functions; - o enh_desc.c: functions for handling enhanced descriptors; - o norm_desc.c: functions for handling normal descriptors; - o chain_mode.c/ring_mode.c:: functions to manage RING/CHAINED modes; - -- GMAC4.x generation - o dwmac4_core.c: dwmac GMAC4.x core functions; - o dwmac4_desc.c: functions for handling GMAC4.x descriptors; - o dwmac4_descs.h: descriptor definitions; - o dwmac4_dma.c: dma functions for the GMAC4.x chip; - o dwmac4_dma.h: dma definitions for the GMAC4.x chip; - o dwmac4.h: core definitions for the GMAC4.x chip; - o dwmac4_lib.c: generic GMAC4.x functions; - -4.12) TSO support (GMAC4.x) - -TSO (Tcp Segmentation Offload) feature is supported by GMAC 4.x chip family. -When a packet is sent through TCP protocol, the TCP stack ensures that -the SKB provided to the low level driver (stmmac in our case) matches with -the maximum frame len (IP header + TCP header + payload <= 1500 bytes (for -MTU set to 1500)). It means that if an application using TCP want to send a -packet which will have a length (after adding headers) > 1514 the packet -will be split in several TCP packets: The data payload is split and headers -(TCP/IP ..) are added. It is done by software. - -When TSO is enabled, the TCP stack doesn't care about the maximum frame -length and provide SKB packet to stmmac as it is. The GMAC IP will have to -perform the segmentation by it self to match with maximum frame length. - -This feature can be enabled in device tree through "snps,tso" entry. - -5) Debug Information - -The driver exports many information i.e. internal statistics, -debug information, MAC and DMA registers etc. - -These can be read in several ways depending on the -type of the information actually needed. - -For example a user can be use the ethtool support -to get statistics: e.g. using: ethtool -S ethX -(that shows the Management counters (MMC) if supported) -or sees the MAC/DMA registers: e.g. using: ethtool -d ethX - -Compiling the Kernel with CONFIG_DEBUG_FS the driver will export the following -debugfs entries: - -/sys/kernel/debug/stmmaceth/descriptors_status - To show the DMA TX/RX descriptor rings - -Developer can also use the "debug" module parameter to get further debug -information (please see: NETIF Msg Level). - -6) Energy Efficient Ethernet - -Energy Efficient Ethernet(EEE) enables IEEE 802.3 MAC sublayer along -with a family of Physical layer to operate in the Low power Idle(LPI) -mode. The EEE mode supports the IEEE 802.3 MAC operation at 100Mbps, -1000Mbps & 10Gbps. - -The LPI mode allows power saving by switching off parts of the -communication device functionality when there is no data to be -transmitted & received. The system on both the side of the link can -disable some functionalities & save power during the period of low-link -utilization. The MAC controls whether the system should enter or exit -the LPI mode & communicate this to PHY. - -As soon as the interface is opened, the driver verifies if the EEE can -be supported. This is done by looking at both the DMA HW capability -register and the PHY devices MCD registers. -To enter in Tx LPI mode the driver needs to have a software timer -that enable and disable the LPI mode when there is nothing to be -transmitted. - -7) Precision Time Protocol (PTP) -The driver supports the IEEE 1588-2002, Precision Time Protocol (PTP), -which enables precise synchronization of clocks in measurement and -control systems implemented with technologies such as network -communication. - -In addition to the basic timestamp features mentioned in IEEE 1588-2002 -Timestamps, new GMAC cores support the advanced timestamp features. -IEEE 1588-2008 that can be enabled when configure the Kernel. - -8) SGMII/RGMII support -New GMAC devices provide own way to manage RGMII/SGMII. -This information is available at run-time by looking at the -HW capability register. This means that the stmmac can manage -auto-negotiation and link status w/o using the PHYLIB stuff. -In fact, the HW provides a subset of extended registers to -restart the ANE, verify Full/Half duplex mode and Speed. -Thanks to these registers, it is possible to look at the -Auto-negotiated Link Parter Ability. diff --git a/Documentation/networking/device_drivers/ti/cpsw_switchdev.txt b/Documentation/networking/device_drivers/ti/cpsw_switchdev.txt index 5c8cee17fca9..12855ab268b8 100644 --- a/Documentation/networking/device_drivers/ti/cpsw_switchdev.txt +++ b/Documentation/networking/device_drivers/ti/cpsw_switchdev.txt @@ -39,7 +39,7 @@ but without enabling "switch" mode, or to different bridges. Devlink configuration parameters ==================== -See Documentation/networking/devlink-params-ti-cpsw-switch.txt +See Documentation/networking/devlink/ti-cpsw-switch.rst ==================== # Bridging in dual mac mode diff --git a/Documentation/networking/devlink-health.txt b/Documentation/networking/devlink-health.txt deleted file mode 100644 index 1db3fbea0831..000000000000 --- a/Documentation/networking/devlink-health.txt +++ /dev/null @@ -1,86 +0,0 @@ -The health mechanism is targeted for Real Time Alerting, in order to know when -something bad had happened to a PCI device -- Provide alert debug information -- Self healing -- If problem needs vendor support, provide a way to gather all needed debugging - information. - -The main idea is to unify and centralize driver health reports in the -generic devlink instance and allow the user to set different -attributes of the health reporting and recovery procedures. - -The devlink health reporter: -Device driver creates a "health reporter" per each error/health type. -Error/Health type can be a known/generic (eg pci error, fw error, rx/tx error) -or unknown (driver specific). -For each registered health reporter a driver can issue error/health reports -asynchronously. All health reports handling is done by devlink. -Device driver can provide specific callbacks for each "health reporter", e.g. - - Recovery procedures - - Diagnostics and object dump procedures - - OOB initial parameters -Different parts of the driver can register different types of health reporters -with different handlers. - -Once an error is reported, devlink health will do the following actions: - * A log is being send to the kernel trace events buffer - * Health status and statistics are being updated for the reporter instance - * Object dump is being taken and saved at the reporter instance (as long as - there is no other dump which is already stored) - * Auto recovery attempt is being done. Depends on: - - Auto-recovery configuration - - Grace period vs. time passed since last recover - -The user interface: -User can access/change each reporter's parameters and driver specific callbacks -via devlink, e.g per error type (per health reporter) - - Configure reporter's generic parameters (like: disable/enable auto recovery) - - Invoke recovery procedure - - Run diagnostics - - Object dump - -The devlink health interface (via netlink): -DEVLINK_CMD_HEALTH_REPORTER_GET - Retrieves status and configuration info per DEV and reporter. -DEVLINK_CMD_HEALTH_REPORTER_SET - Allows reporter-related configuration setting. -DEVLINK_CMD_HEALTH_REPORTER_RECOVER - Triggers a reporter's recovery procedure. -DEVLINK_CMD_HEALTH_REPORTER_DIAGNOSE - Retrieves diagnostics data from a reporter on a device. -DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET - Retrieves the last stored dump. Devlink health - saves a single dump. If an dump is not already stored by the devlink - for this reporter, devlink generates a new dump. - dump output is defined by the reporter. -DEVLINK_CMD_HEALTH_REPORTER_DUMP_CLEAR - Clears the last saved dump file for the specified reporter. - - - netlink - +--------------------------+ - | | - | + | - | | | - +--------------------------+ - |request for ops - |(diagnose, - mlx5_core devlink |recover, - |dump) -+--------+ +--------------------------+ -| | | reporter| | -| | | +---------v----------+ | -| | ops execution | | | | -| <----------------------------------+ | | -| | | | | | -| | | + ^------------------+ | -| | | | request for ops | -| | | | (recover, dump) | -| | | | | -| | | +-+------------------+ | -| | health report | | health handler | | -| +-------------------------------> | | -| | | +--------------------+ | -| | health reporter create | | -| +----------------------------> | -+--------+ +--------------------------+ diff --git a/Documentation/networking/devlink-info-versions.rst b/Documentation/networking/devlink-info-versions.rst deleted file mode 100644 index 4914f581b1fd..000000000000 --- a/Documentation/networking/devlink-info-versions.rst +++ /dev/null @@ -1,64 +0,0 @@ -.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) - -===================== -Devlink info versions -===================== - -board.id -======== - -Unique identifier of the board design. - -board.rev -========= - -Board design revision. - -asic.id -======= - -ASIC design identifier. - -asic.rev -======== - -ASIC design revision. - -board.manufacture -================= - -An identifier of the company or the facility which produced the part. - -fw -== - -Overall firmware version, often representing the collection of -fw.mgmt, fw.app, etc. - -fw.mgmt -======= - -Control unit firmware version. This firmware is responsible for house -keeping tasks, PHY control etc. but not the packet-by-packet data path -operation. - -fw.app -====== - -Data path microcode controlling high-speed packet processing. - -fw.undi -======= - -UNDI software, may include the UEFI driver, firmware or both. - -fw.ncsi -======= - -Version of the software responsible for supporting/handling the -Network Controller Sideband Interface. - -fw.psid -======= - -Unique identifier of the firmware parameter set. diff --git a/Documentation/networking/devlink-params-bnxt.txt b/Documentation/networking/devlink-params-bnxt.txt deleted file mode 100644 index 481aa303d5b4..000000000000 --- a/Documentation/networking/devlink-params-bnxt.txt +++ /dev/null @@ -1,18 +0,0 @@ -enable_sriov [DEVICE, GENERIC] - Configuration mode: Permanent - -ignore_ari [DEVICE, GENERIC] - Configuration mode: Permanent - -msix_vec_per_pf_max [DEVICE, GENERIC] - Configuration mode: Permanent - -msix_vec_per_pf_min [DEVICE, GENERIC] - Configuration mode: Permanent - -gre_ver_check [DEVICE, DRIVER-SPECIFIC] - Generic Routing Encapsulation (GRE) version check will - be enabled in the device. If disabled, device skips - version checking for incoming packets. - Type: Boolean - Configuration mode: Permanent diff --git a/Documentation/networking/devlink-params-mlx5.txt b/Documentation/networking/devlink-params-mlx5.txt deleted file mode 100644 index 5071467118bd..000000000000 --- a/Documentation/networking/devlink-params-mlx5.txt +++ /dev/null @@ -1,17 +0,0 @@ -flow_steering_mode [DEVICE, DRIVER-SPECIFIC] - Controls the flow steering mode of the driver. - Two modes are supported: - 1. 'dmfs' - Device managed flow steering. - 2. 'smfs - Software/Driver managed flow steering. - In DMFS mode, the HW steering entities are created and - managed through the Firmware. - In SMFS mode, the HW steering entities are created and - managed though by the driver directly into Hardware - without firmware intervention. - Type: String - Configuration mode: runtime - -enable_roce [DEVICE, GENERIC] - Enable handling of RoCE traffic in the device. - Defaultly enabled. - Configuration mode: driverinit diff --git a/Documentation/networking/devlink-params-mlxsw.txt b/Documentation/networking/devlink-params-mlxsw.txt deleted file mode 100644 index c63ea9fc7009..000000000000 --- a/Documentation/networking/devlink-params-mlxsw.txt +++ /dev/null @@ -1,10 +0,0 @@ -fw_load_policy [DEVICE, GENERIC] - Configuration mode: driverinit - -acl_region_rehash_interval [DEVICE, DRIVER-SPECIFIC] - Sets an interval for periodic ACL region rehashes. - The value is in milliseconds, minimal value is "3000". - Value "0" disables the periodic work. - The first rehash will be run right after value is set. - Type: u32 - Configuration mode: runtime diff --git a/Documentation/networking/devlink-params-mv88e6xxx.txt b/Documentation/networking/devlink-params-mv88e6xxx.txt deleted file mode 100644 index 21c4b3556ef2..000000000000 --- a/Documentation/networking/devlink-params-mv88e6xxx.txt +++ /dev/null @@ -1,7 +0,0 @@ -ATU_hash [DEVICE, DRIVER-SPECIFIC] - Select one of four possible hashing algorithms for - MAC addresses in the Address Translation Unit. - A value of 3 seems to work better than the default of - 1 when many MAC addresses have the same OUI. - Configuration mode: runtime - Type: u8. 0-3 valid. diff --git a/Documentation/networking/devlink-params-nfp.txt b/Documentation/networking/devlink-params-nfp.txt deleted file mode 100644 index 43e4d4034865..000000000000 --- a/Documentation/networking/devlink-params-nfp.txt +++ /dev/null @@ -1,5 +0,0 @@ -fw_load_policy [DEVICE, GENERIC] - Configuration mode: permanent - -reset_dev_on_drv_probe [DEVICE, GENERIC] - Configuration mode: permanent diff --git a/Documentation/networking/devlink-params-ti-cpsw-switch.txt b/Documentation/networking/devlink-params-ti-cpsw-switch.txt deleted file mode 100644 index 4037458499f7..000000000000 --- a/Documentation/networking/devlink-params-ti-cpsw-switch.txt +++ /dev/null @@ -1,10 +0,0 @@ -ale_bypass [DEVICE, DRIVER-SPECIFIC] - Allows to enable ALE_CONTROL(4).BYPASS mode for debug purposes. - All packets will be sent to the Host port only if enabled. - Type: bool - Configuration mode: runtime - -switch_mode [DEVICE, DRIVER-SPECIFIC] - Enable switch mode - Type: bool - Configuration mode: runtime diff --git a/Documentation/networking/devlink-params.txt b/Documentation/networking/devlink-params.txt deleted file mode 100644 index 04e234e9acc9..000000000000 --- a/Documentation/networking/devlink-params.txt +++ /dev/null @@ -1,71 +0,0 @@ -Devlink configuration parameters -================================ -Following is the list of configuration parameters via devlink interface. -Each parameter can be generic or driver specific and are device level -parameters. - -Note that the driver-specific files should contain the generic params -they support to, with supported config modes. - -Each parameter can be set in different configuration modes: - runtime - set while driver is running, no reset required. - driverinit - applied while driver initializes, requires restart - driver by devlink reload command. - permanent - written to device's non-volatile memory, hard reset - required. - -Following is the list of parameters: -==================================== -enable_sriov [DEVICE, GENERIC] - Enable Single Root I/O Virtualisation (SRIOV) in - the device. - Type: Boolean - -ignore_ari [DEVICE, GENERIC] - Ignore Alternative Routing-ID Interpretation (ARI) - capability. If enabled, adapter will ignore ARI - capability even when platforms has the support - enabled and creates same number of partitions when - platform does not support ARI. - Type: Boolean - -msix_vec_per_pf_max [DEVICE, GENERIC] - Provides the maximum number of MSIX interrupts that - a device can create. Value is same across all - physical functions (PFs) in the device. - Type: u32 - -msix_vec_per_pf_min [DEVICE, GENERIC] - Provides the minimum number of MSIX interrupts required - for the device initialization. Value is same across all - physical functions (PFs) in the device. - Type: u32 - -fw_load_policy [DEVICE, GENERIC] - Controls the device's firmware loading policy. - Valid values: - * DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DRIVER (0) - Load firmware version preferred by the driver. - * DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_FLASH (1) - Load firmware currently stored in flash. - * DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DISK (2) - Load firmware currently available on host's disk. - Type: u8 - -reset_dev_on_drv_probe [DEVICE, GENERIC] - Controls the device's reset policy on driver probe. - Valid values: - * DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_UNKNOWN (0) - Unknown or invalid value. - * DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_ALWAYS (1) - Always reset device on driver probe. - * DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_NEVER (2) - Never reset device on driver probe. - * DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_DISK (3) - Reset only if device firmware can be found in the - filesystem. - Type: u8 - -enable_roce [DEVICE, GENERIC] - Enable handling of RoCE traffic in the device. - Type: Boolean diff --git a/Documentation/networking/devlink-trap-netdevsim.rst b/Documentation/networking/devlink-trap-netdevsim.rst deleted file mode 100644 index b721c9415473..000000000000 --- a/Documentation/networking/devlink-trap-netdevsim.rst +++ /dev/null @@ -1,20 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -====================== -Devlink Trap netdevsim -====================== - -Driver-specific Traps -===================== - -.. list-table:: List of Driver-specific Traps Registered by ``netdevsim`` - :widths: 5 5 90 - - * - Name - - Type - - Description - * - ``fid_miss`` - - ``exception`` - - When a packet enters the device it is classified to a filtering - indentifier (FID) based on the ingress port and VLAN. This trap is used - to trap packets for which a FID could not be found diff --git a/Documentation/networking/devlink/bnxt.rst b/Documentation/networking/devlink/bnxt.rst new file mode 100644 index 000000000000..82ef9ec46707 --- /dev/null +++ b/Documentation/networking/devlink/bnxt.rst @@ -0,0 +1,74 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +bnxt devlink support +==================== + +This document describes the devlink features implemented by the ``bnxt`` +device driver. + +Parameters +========== + +.. list-table:: Generic parameters implemented + + * - Name + - Mode + * - ``enable_sriov`` + - Permanent + * - ``ignore_ari`` + - Permanent + * - ``msix_vec_per_pf_max`` + - Permanent + * - ``msix_vec_per_pf_min`` + - Permanent + +The ``bnxt`` driver also implements the following driver-specific +parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``gre_ver_check`` + - Boolean + - Permanent + - Generic Routing Encapsulation (GRE) version check will be enabled in + the device. If disabled, the device will skip the version check for + incoming packets. + +Info versions +============= + +The ``bnxt_en`` driver reports the following versions + +.. list-table:: devlink info versions implemented + :widths: 5 5 90 + + * - Name + - Type + - Description + * - ``asic.id`` + - fixed + - ASIC design identifier + * - ``asic.rev`` + - fixed + - ASIC design revision + * - ``fw.psid`` + - stored, running + - Firmware parameter set version of the board + * - ``fw`` + - stored, running + - Overall board firmware version + * - ``fw.app`` + - stored, running + - Data path firmware version + * - ``fw.mgmt`` + - stored, running + - Management firmware version + * - ``fw.roce`` + - stored, running + - RoCE management firmware version diff --git a/Documentation/networking/devlink/devlink-dpipe.rst b/Documentation/networking/devlink/devlink-dpipe.rst new file mode 100644 index 000000000000..468fe1001b74 --- /dev/null +++ b/Documentation/networking/devlink/devlink-dpipe.rst @@ -0,0 +1,252 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============= +Devlink DPIPE +============= + +Background +========== + +While performing the hardware offloading process, much of the hardware +specifics cannot be presented. These details are useful for debugging, and +``devlink-dpipe`` provides a standardized way to provide visibility into the +offloading process. + +For example, the routing longest prefix match (LPM) algorithm used by the +Linux kernel may differ from the hardware implementation. The pipeline debug +API (DPIPE) is aimed at providing the user visibility into the ASIC's +pipeline in a generic way. + +The hardware offload process is expected to be done in a way that the user +should not be able to distinguish between the hardware vs. software +implementation. In this process, hardware specifics are neglected. In +reality those details can have lots of meaning and should be exposed in some +standard way. + +This problem is made even more complex when one wishes to offload the +control path of the whole networking stack to a switch ASIC. Due to +differences in the hardware and software models some processes cannot be +represented correctly. + +One example is the kernel's LPM algorithm which in many cases differs +greatly to the hardware implementation. The configuration API is the same, +but one cannot rely on the Forward Information Base (FIB) to look like the +Level Path Compression trie (LPC-trie) in hardware. + +In many situations trying to analyze systems failure solely based on the +kernel's dump may not be enough. By combining this data with complementary +information about the underlying hardware, this debugging can be made +easier; additionally, the information can be useful when debugging +performance issues. + +Overview +======== + +The ``devlink-dpipe`` interface closes this gap. The hardware's pipeline is +modeled as a graph of match/action tables. Each table represents a specific +hardware block. This model is not new, first being used by the P4 language. + +Traditionally it has been used as an alternative model for hardware +configuration, but the ``devlink-dpipe`` interface uses it for visibility +purposes as a standard complementary tool. The system's view from +``devlink-dpipe`` should change according to the changes done by the +standard configuration tools. + +For example, it’s quiet common to implement Access Control Lists (ACL) +using Ternary Content Addressable Memory (TCAM). The TCAM memory can be +divided into TCAM regions. Complex TC filters can have multiple rules with +different priorities and different lookup keys. On the other hand hardware +TCAM regions have a predefined lookup key. Offloading the TC filter rules +using TCAM engine can result in multiple TCAM regions being interconnected +in a chain (which may affect the data path latency). In response to a new TC +filter new tables should be created describing those regions. + +Model +===== + +The ``DPIPE`` model introduces several objects: + + * headers + * tables + * entries + +A ``header`` describes packet formats and provides names for fields within +the packet. A ``table`` describes hardware blocks. An ``entry`` describes +the actual content of a specific table. + +The hardware pipeline is not port specific, but rather describes the whole +ASIC. Thus it is tied to the top of the ``devlink`` infrastructure. + +Drivers can register and unregister tables at run time, in order to support +dynamic behavior. This dynamic behavior is mandatory for describing hardware +blocks like TCAM regions which can be allocated and freed dynamically. + +``devlink-dpipe`` generally is not intended for configuration. The exception +is hardware counting for a specific table. + +The following commands are used to obtain the ``dpipe`` objects from +userspace: + + * ``table_get``: Receive a table's description. + * ``headers_get``: Receive a device's supported headers. + * ``entries_get``: Receive a table's current entries. + * ``counters_set``: Enable or disable counters on a table. + +Table +----- + +The driver should implement the following operations for each table: + + * ``matches_dump``: Dump the supported matches. + * ``actions_dump``: Dump the supported actions. + * ``entries_dump``: Dump the actual content of the table. + * ``counters_set_update``: Synchronize hardware with counters enabled or + disabled. + +Header/Field +------------ + +In a similar way to P4 headers and fields are used to describe a table's +behavior. There is a slight difference between the standard protocol headers +and specific ASIC metadata. The protocol headers should be declared in the +``devlink`` core API. On the other hand ASIC meta data is driver specific +and should be defined in the driver. Additionally, each driver-specific +devlink documentation file should document the driver-specific ``dpipe`` +headers it implements. The headers and fields are identified by enumeration. + +In order to provide further visibility some ASIC metadata fields could be +mapped to kernel objects. For example, internal router interface indexes can +be directly mapped to the net device ifindex. FIB table indexes used by +different Virtual Routing and Forwarding (VRF) tables can be mapped to +internal routing table indexes. + +Match +----- + +Matches are kept primitive and close to hardware operation. Match types like +LPM are not supported due to the fact that this is exactly a process we wish +to describe in full detail. Example of matches: + + * ``field_exact``: Exact match on a specific field. + * ``field_exact_mask``: Exact match on a specific field after masking. + * ``field_range``: Match on a specific range. + +The id's of the header and the field should be specified in order to +identify the specific field. Furthermore, the header index should be +specified in order to distinguish multiple headers of the same type in a +packet (tunneling). + +Action +------ + +Similar to match, the actions are kept primitive and close to hardware +operation. For example: + + * ``field_modify``: Modify the field value. + * ``field_inc``: Increment the field value. + * ``push_header``: Add a header. + * ``pop_header``: Remove a header. + +Entry +----- + +Entries of a specific table can be dumped on demand. Each eentry is +identified with an index and its properties are described by a list of +match/action values and specific counter. By dumping the tables content the +interactions between tables can be resolved. + +Abstraction Example +=================== + +The following is an example of the abstraction model of the L3 part of +Mellanox Spectrum ASIC. The blocks are described in the order they appear in +the pipeline. The table sizes in the following examples are not real +hardware sizes and are provided for demonstration purposes. + +LPM +--- + +The LPM algorithm can be implemented as a list of hash tables. Each hash +table contains routes with the same prefix length. The root of the list is +/32, and in case of a miss the hardware will continue to the next hash +table. The depth of the search will affect the data path latency. + +In case of a hit the entry contains information about the next stage of the +pipeline which resolves the MAC address. The next stage can be either local +host table for directly connected routes, or adjacency table for next-hops. +The ``meta.lpm_prefix`` field is used to connect two LPM tables. + +.. code:: + + table lpm_prefix_16 { + size: 4096, + counters_enabled: true, + match: { meta.vr_id: exact, + ipv4.dst_addr: exact_mask, + ipv6.dst_addr: exact_mask, + meta.lpm_prefix: exact }, + action: { meta.adj_index: set, + meta.adj_group_size: set, + meta.rif_port: set, + meta.lpm_prefix: set }, + } + +Local Host +---------- + +In the case of local routes the LPM lookup already resolves the egress +router interface (RIF), yet the exact MAC address is not known. The local +host table is a hash table combining the output interface id with +destination IP address as a key. The result is the MAC address. + +.. code:: + + table local_host { + size: 4096, + counters_enabled: true, + match: { meta.rif_port: exact, + ipv4.dst_addr: exact}, + action: { ethernet.daddr: set } + } + +Adjacency +--------- + +In case of remote routes this table does the ECMP. The LPM lookup results in +ECMP group size and index that serves as a global offset into this table. +Concurrently a hash of the packet is generated. Based on the ECMP group size +and the packet's hash a local offset is generated. Multiple LPM entries can +point to the same adjacency group. + +.. code:: + + table adjacency { + size: 4096, + counters_enabled: true, + match: { meta.adj_index: exact, + meta.adj_group_size: exact, + meta.packet_hash_index: exact }, + action: { ethernet.daddr: set, + meta.erif: set } + } + +ERIF +---- + +In case the egress RIF and destination MAC have been resolved by previous +tables this table does multiple operations like TTL decrease and MTU check. +Then the decision of forward/drop is taken and the port L3 statistics are +updated based on the packet's type (broadcast, unicast, multicast). + +.. code:: + + table erif { + size: 800, + counters_enabled: true, + match: { meta.rif_port: exact, + meta.is_l3_unicast: exact, + meta.is_l3_broadcast: exact, + meta.is_l3_multicast, exact }, + action: { meta.l3_drop: set, + meta.l3_forward: set } + } diff --git a/Documentation/networking/devlink/devlink-health.rst b/Documentation/networking/devlink/devlink-health.rst new file mode 100644 index 000000000000..0c99b11f05f9 --- /dev/null +++ b/Documentation/networking/devlink/devlink-health.rst @@ -0,0 +1,114 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +Devlink Health +============== + +Background +========== + +The ``devlink`` health mechanism is targeted for Real Time Alerting, in +order to know when something bad happened to a PCI device. + + * Provide alert debug information. + * Self healing. + * If problem needs vendor support, provide a way to gather all needed + debugging information. + +Overview +======== + +The main idea is to unify and centralize driver health reports in the +generic ``devlink`` instance and allow the user to set different +attributes of the health reporting and recovery procedures. + +The ``devlink`` health reporter: +Device driver creates a "health reporter" per each error/health type. +Error/Health type can be a known/generic (eg pci error, fw error, rx/tx error) +or unknown (driver specific). +For each registered health reporter a driver can issue error/health reports +asynchronously. All health reports handling is done by ``devlink``. +Device driver can provide specific callbacks for each "health reporter", e.g.: + + * Recovery procedures + * Diagnostics procedures + * Object dump procedures + * OOB initial parameters + +Different parts of the driver can register different types of health reporters +with different handlers. + +Actions +======= + +Once an error is reported, devlink health will perform the following actions: + + * A log is being send to the kernel trace events buffer + * Health status and statistics are being updated for the reporter instance + * Object dump is being taken and saved at the reporter instance (as long as + there is no other dump which is already stored) + * Auto recovery attempt is being done. Depends on: + - Auto-recovery configuration + - Grace period vs. time passed since last recover + +User Interface +============== + +User can access/change each reporter's parameters and driver specific callbacks +via ``devlink``, e.g per error type (per health reporter): + + * Configure reporter's generic parameters (like: disable/enable auto recovery) + * Invoke recovery procedure + * Run diagnostics + * Object dump + +.. list-table:: List of devlink health interfaces + :widths: 10 90 + + * - Name + - Description + * - ``DEVLINK_CMD_HEALTH_REPORTER_GET`` + - Retrieves status and configuration info per DEV and reporter. + * - ``DEVLINK_CMD_HEALTH_REPORTER_SET`` + - Allows reporter-related configuration setting. + * - ``DEVLINK_CMD_HEALTH_REPORTER_RECOVER`` + - Triggers a reporter's recovery procedure. + * - ``DEVLINK_CMD_HEALTH_REPORTER_DIAGNOSE`` + - Retrieves diagnostics data from a reporter on a device. + * - ``DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET`` + - Retrieves the last stored dump. Devlink health + saves a single dump. If an dump is not already stored by the devlink + for this reporter, devlink generates a new dump. + dump output is defined by the reporter. + * - ``DEVLINK_CMD_HEALTH_REPORTER_DUMP_CLEAR`` + - Clears the last saved dump file for the specified reporter. + +The following diagram provides a general overview of ``devlink-health``:: + + netlink + +--------------------------+ + | | + | + | + | | | + +--------------------------+ + |request for ops + |(diagnose, + mlx5_core devlink |recover, + |dump) + +--------+ +--------------------------+ + | | | reporter| | + | | | +---------v----------+ | + | | ops execution | | | | + | <----------------------------------+ | | + | | | | | | + | | | + ^------------------+ | + | | | | request for ops | + | | | | (recover, dump) | + | | | | | + | | | +-+------------------+ | + | | health report | | health handler | | + | +-------------------------------> | | + | | | +--------------------+ | + | | health reporter create | | + | +----------------------------> | + +--------+ +--------------------------+ diff --git a/Documentation/networking/devlink/devlink-info.rst b/Documentation/networking/devlink/devlink-info.rst new file mode 100644 index 000000000000..70981dd1b981 --- /dev/null +++ b/Documentation/networking/devlink/devlink-info.rst @@ -0,0 +1,100 @@ +.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +============ +Devlink Info +============ + +The ``devlink-info`` mechanism enables device drivers to report device +information in a generic fashion. It is extensible, and enables exporting +even device or driver specific information. + +devlink supports representing the following types of versions + +.. list-table:: List of version types + :widths: 5 95 + + * - Type + - Description + * - ``fixed`` + - Represents fixed versions, which cannot change. For example, + component identifiers or the board version reported in the PCI VPD. + * - ``running`` + - Represents the version of the currently running component. For + example the running version of firmware. These versions generally + only update after a reboot. + * - ``stored`` + - Represents the version of a component as stored, such as after a + flash update. Stored values should update to reflect changes in the + flash even if a reboot has not yet occurred. + +Generic Versions +================ + +It is expected that drivers use the following generic names for exporting +version information. Other information may be exposed using driver-specific +names, but these should be documented in the driver-specific file. + +board.id +-------- + +Unique identifier of the board design. + +board.rev +--------- + +Board design revision. + +asic.id +------- + +ASIC design identifier. + +asic.rev +-------- + +ASIC design revision. + +board.manufacture +----------------- + +An identifier of the company or the facility which produced the part. + +fw +-- + +Overall firmware version, often representing the collection of +fw.mgmt, fw.app, etc. + +fw.mgmt +------- + +Control unit firmware version. This firmware is responsible for house +keeping tasks, PHY control etc. but not the packet-by-packet data path +operation. + +fw.app +------ + +Data path microcode controlling high-speed packet processing. + +fw.undi +------- + +UNDI software, may include the UEFI driver, firmware or both. + +fw.ncsi +------- + +Version of the software responsible for supporting/handling the +Network Controller Sideband Interface. + +fw.psid +------- + +Unique identifier of the firmware parameter set. + +fw.roce +------- + +RoCE firmware version which is responsible for handling roce +management. diff --git a/Documentation/networking/devlink/devlink-params.rst b/Documentation/networking/devlink/devlink-params.rst new file mode 100644 index 000000000000..da2f85c0fa21 --- /dev/null +++ b/Documentation/networking/devlink/devlink-params.rst @@ -0,0 +1,108 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +Devlink Params +============== + +``devlink`` provides capability for a driver to expose device parameters for low +level device functionality. Since devlink can operate at the device-wide +level, it can be used to provide configuration that may affect multiple +ports on a single device. + +This document describes a number of generic parameters that are supported +across multiple drivers. Each driver is also free to add their own +parameters. Each driver must document the specific parameters they support, +whether generic or not. + +Configuration modes +=================== + +Parameters may be set in different configuration modes. + +.. list-table:: Possible configuration modes + :widths: 5 90 + + * - Name + - Description + * - ``runtime`` + - set while the driver is running, and takes effect immediately. No + reset is required. + * - ``driverinit`` + - applied while the driver initializes. Requires the user to restart + the driver using the ``devlink`` reload command. + * - ``permanent`` + - written to the device's non-volatile memory. A hard reset is required + for it to take effect. + +Reloading +--------- + +In order for ``driverinit`` parameters to take effect, the driver must +support reloading via the ``devlink-reload`` command. This command will +request a reload of the device driver. + +Generic configuration parameters +================================ +The following is a list of generic configuration parameters that drivers may +add. Use of generic parameters is preferred over each driver creating their +own name. + +.. list-table:: List of generic parameters + :widths: 5 5 90 + + * - Name + - Type + - Description + * - ``enable_sriov`` + - Boolean + - Enable Single Root I/O Virtualization (SRIOV) in the device. + * - ``ignore_ari`` + - Boolean + - Ignore Alternative Routing-ID Interpretation (ARI) capability. If + enabled, the adapter will ignore ARI capability even when the + platform has support enabled. The device will create the same number + of partitions as when the platform does not support ARI. + * - ``msix_vec_per_pf_max`` + - u32 + - Provides the maximum number of MSI-X interrupts that a device can + create. Value is the same across all physical functions (PFs) in the + device. + * - ``msix_vec_per_pf_min`` + - u32 + - Provides the minimum number of MSI-X interrupts required for the + device to initialize. Value is the same across all physical functions + (PFs) in the device. + * - ``fw_load_policy`` + - u8 + - Control the device's firmware loading policy. + - ``DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DRIVER`` (0) + Load firmware version preferred by the driver. + - ``DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_FLASH`` (1) + Load firmware currently stored in flash. + - ``DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DISK`` (2) + Load firmware currently available on host's disk. + * - ``reset_dev_on_drv_probe`` + - u8 + - Controls the device's reset policy on driver probe. + - ``DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_UNKNOWN`` (0) + Unknown or invalid value. + - ``DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_ALWAYS`` (1) + Always reset device on driver probe. + - ``DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_NEVER`` (2) + Never reset device on driver probe. + - ``DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_DISK`` (3) + Reset the device only if firmware can be found in the filesystem. + * - ``enable_roce`` + - Boolean + - Enable handling of RoCE traffic in the device. + * - ``internal_err_reset`` + - Boolean + - When enabled, the device driver will reset the device on internal + errors. + * - ``max_macs`` + - u32 + - Specifies the maximum number of MAC addresses per ethernet port of + this device. + * - ``region_snapshot_enable`` + - Boolean + - Enable capture of ``devlink-region`` snapshots. diff --git a/Documentation/networking/devlink/devlink-region.rst b/Documentation/networking/devlink/devlink-region.rst new file mode 100644 index 000000000000..1a7683e7acb2 --- /dev/null +++ b/Documentation/networking/devlink/devlink-region.rst @@ -0,0 +1,60 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +Devlink Region +============== + +``devlink`` regions enable access to driver defined address regions using +devlink. + +Each device can create and register its own supported address regions. The +region can then be accessed via the devlink region interface. + +Region snapshots are collected by the driver, and can be accessed via read +or dump commands. This allows future analysis on the created snapshots. +Regions may optionally support triggering snapshots on demand. + +The major benefit to creating a region is to provide access to internal +address regions that are otherwise inaccessible to the user. + +Regions may also be used to provide an additional way to debug complex error +states, but see also :doc:`devlink-health` + +example usage +------------- + +.. code:: shell + + $ devlink region help + $ devlink region show [ DEV/REGION ] + $ devlink region del DEV/REGION snapshot SNAPSHOT_ID + $ devlink region dump DEV/REGION [ snapshot SNAPSHOT_ID ] + $ devlink region read DEV/REGION [ snapshot SNAPSHOT_ID ] + address ADDRESS length length + + # Show all of the exposed regions with region sizes: + $ devlink region show + pci/0000:00:05.0/cr-space: size 1048576 snapshot [1 2] + pci/0000:00:05.0/fw-health: size 64 snapshot [1 2] + + # Delete a snapshot using: + $ devlink region del pci/0000:00:05.0/cr-space snapshot 1 + + # Trigger (request) a snapshot be taken: + $ devlink region trigger pci/0000:00:05.0/cr-space + + # Dump a snapshot: + $ devlink region dump pci/0000:00:05.0/fw-health snapshot 1 + 0000000000000000 0014 95dc 0014 9514 0035 1670 0034 db30 + 0000000000000010 0000 0000 ffff ff04 0029 8c00 0028 8cc8 + 0000000000000020 0016 0bb8 0016 1720 0000 0000 c00f 3ffc + 0000000000000030 bada cce5 bada cce5 bada cce5 bada cce5 + + # Read a specific part of a snapshot: + $ devlink region read pci/0000:00:05.0/fw-health snapshot 1 address 0 + length 16 + 0000000000000000 0014 95dc 0014 9514 0035 1670 0034 db30 + +As regions are likely very device or driver specific, no generic regions are +defined. See the driver-specific documentation files for information on the +specific regions a driver supports. diff --git a/Documentation/networking/devlink/devlink-resource.rst b/Documentation/networking/devlink/devlink-resource.rst new file mode 100644 index 000000000000..93e92d2f0752 --- /dev/null +++ b/Documentation/networking/devlink/devlink-resource.rst @@ -0,0 +1,62 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================ +Devlink Resource +================ + +``devlink`` provides the ability for drivers to register resources, which +can allow administrators to see the device restrictions for a given +resource, as well as how much of the given resource is currently +in use. Additionally, these resources can optionally have configurable size. +This could enable the administrator to limit the number of resources that +are used. + +For example, the ``netdevsim`` driver enables ``/IPv4/fib`` and +``/IPv4/fib-rules`` as resources to limit the number of IPv4 FIB entries and +rules for a given device. + +Resource Ids +============ + +Each resource is represented by an id, and contains information about its +current size and related sub resources. To access a sub resource, you +specify the path of the resource. For example ``/IPv4/fib`` is the id for +the ``fib`` sub-resource under the ``IPv4`` resource. + +example usage +------------- + +The resources exposed by the driver can be observed, for example: + +.. code:: shell + + $devlink resource show pci/0000:03:00.0 + pci/0000:03:00.0: + name kvd size 245760 unit entry + resources: + name linear size 98304 occ 0 unit entry size_min 0 size_max 147456 size_gran 128 + name hash_double size 60416 unit entry size_min 32768 size_max 180224 size_gran 128 + name hash_single size 87040 unit entry size_min 65536 size_max 212992 size_gran 128 + +Some resource's size can be changed. Examples: + +.. code:: shell + + $devlink resource set pci/0000:03:00.0 path /kvd/hash_single size 73088 + $devlink resource set pci/0000:03:00.0 path /kvd/hash_double size 74368 + +The changes do not apply immediately, this can be validated by the 'size_new' +attribute, which represents the pending change in size. For example: + +.. code:: shell + + $devlink resource show pci/0000:03:00.0 + pci/0000:03:00.0: + name kvd size 245760 unit entry size_valid false + resources: + name linear size 98304 size_new 147456 occ 0 unit entry size_min 0 size_max 147456 size_gran 128 + name hash_double size 60416 unit entry size_min 32768 size_max 180224 size_gran 128 + name hash_single size 87040 unit entry size_min 65536 size_max 212992 size_gran 128 + +Note that changes in resource size may require a device reload to properly +take effect. diff --git a/Documentation/networking/devlink-trap.rst b/Documentation/networking/devlink/devlink-trap.rst index 03311849bfb1..47a429bb8658 100644 --- a/Documentation/networking/devlink-trap.rst +++ b/Documentation/networking/devlink/devlink-trap.rst @@ -223,6 +223,21 @@ be added to the following table: * - ``ipv6_lpm_miss`` - ``exception`` - Traps unicast IPv6 packets that did not match any route + * - ``non_routable_packet`` + - ``drop`` + - Traps packets that the device decided to drop because they are not + supposed to be routed. For example, IGMP queries can be flooded by the + device in layer 2 and reach the router. Such packets should not be + routed and instead dropped + * - ``decap_error`` + - ``exception`` + - Traps NVE and IPinIP packets that the device decided to drop because of + failure during decapsulation (e.g., packet being too short, reserved + bits set in VXLAN header) + * - ``overlay_smac_is_mc`` + - ``drop`` + - Traps NVE packets that the device decided to drop because their overlay + source MAC is multicast Driver-specific Packet Traps ============================ @@ -233,7 +248,8 @@ help debug packet drops caused by these exceptions. The following list includes links to the description of driver-specific traps registered by various device drivers: - * :doc:`devlink-trap-netdevsim` + * :doc:`netdevsim` + * :doc:`mlxsw` Generic Packet Trap Groups ========================== @@ -258,6 +274,9 @@ narrow. The description of these groups must be added to the following table: * - ``buffer_drops`` - Contains packet traps for packets that were dropped by the device due to an enqueue decision + * - ``tunnel_drops`` + - Contains packet traps for packets that were dropped by the device during + tunnel encapsulation / decapsulation Testing ======= diff --git a/Documentation/networking/devlink/index.rst b/Documentation/networking/devlink/index.rst new file mode 100644 index 000000000000..087ff54d53fc --- /dev/null +++ b/Documentation/networking/devlink/index.rst @@ -0,0 +1,42 @@ +Linux Devlink Documentation +=========================== + +devlink is an API to expose device information and resources not directly +related to any device class, such as chip-wide/switch-ASIC-wide configuration. + +Interface documentation +----------------------- + +The following pages describe various interfaces available through devlink in +general. + +.. toctree:: + :maxdepth: 1 + + devlink-dpipe + devlink-health + devlink-info + devlink-params + devlink-region + devlink-resource + devlink-trap + +Driver-specific documentation +----------------------------- + +Each driver that implements ``devlink`` is expected to document what +parameters, info versions, and other features it supports. + +.. toctree:: + :maxdepth: 1 + + bnxt + ionic + mlx4 + mlx5 + mlxsw + mv88e6xxx + netdevsim + nfp + qed + ti-cpsw-switch diff --git a/Documentation/networking/devlink/ionic.rst b/Documentation/networking/devlink/ionic.rst new file mode 100644 index 000000000000..48da9c92d584 --- /dev/null +++ b/Documentation/networking/devlink/ionic.rst @@ -0,0 +1,29 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== +ionic devlink support +===================== + +This document describes the devlink features implemented by the ``ionic`` +device driver. + +Info versions +============= + +The ``ionic`` driver reports the following versions + +.. list-table:: devlink info versions implemented + :widths: 5 5 90 + + * - Name + - Type + - Description + * - ``fw`` + - running + - Version of firmware running on the device + * - ``asic.id`` + - fixed + - The ASIC type for this device + * - ``asic.rev`` + - fixed + - The revision of the ASIC for this device diff --git a/Documentation/networking/devlink/mlx4.rst b/Documentation/networking/devlink/mlx4.rst new file mode 100644 index 000000000000..7b2d17ea5471 --- /dev/null +++ b/Documentation/networking/devlink/mlx4.rst @@ -0,0 +1,56 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +mlx4 devlink support +==================== + +This document describes the devlink features implemented by the ``mlx4`` +device driver. + +Parameters +========== + +.. list-table:: Generic parameters implemented + + * - Name + - Mode + * - ``internal_err_reset`` + - driverinit, runtime + * - ``max_macs`` + - driverinit + * - ``region_snapshot_enable`` + - driverinit, runtime + +The ``mlx4`` driver also implements the following driver-specific +parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``enable_64b_cqe_eqe`` + - Boolean + - driverinit + - Enable 64 byte CQEs/EQEs, if the FW supports it. + * - ``enable_4k_uar`` + - Boolean + - driverinit + - Enable using the 4k UAR. + +The ``mlx4`` driver supports reloading via ``DEVLINK_CMD_RELOAD`` + +Regions +======= + +The ``mlx4`` driver supports dumping the firmware PCI crspace and health +buffer during a critical firmware issue. + +In case a firmware command times out, firmware getting stuck, or a non zero +value on the catastrophic buffer, a snapshot will be taken by the driver. + +The ``cr-space`` region will contain the firmware PCI crspace contents. The +``fw-health`` region will contain the device firmware's health buffer. +Snapshots for both of these regions are taken on the same event triggers. diff --git a/Documentation/networking/devlink/mlx5.rst b/Documentation/networking/devlink/mlx5.rst new file mode 100644 index 000000000000..629a6e69c036 --- /dev/null +++ b/Documentation/networking/devlink/mlx5.rst @@ -0,0 +1,59 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +mlx5 devlink support +==================== + +This document describes the devlink features implemented by the ``mlx5`` +device driver. + +Parameters +========== + +.. list-table:: Generic parameters implemented + + * - Name + - Mode + * - ``enable_roce`` + - driverinit + +The ``mlx5`` driver also implements the following driver-specific +parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``flow_steering_mode`` + - string + - runtime + - Controls the flow steering mode of the driver + + * ``dmfs`` Device managed flow steering. In DMFS mode, the HW + steering entities are created and managed through firmware. + * ``smfs`` Software managed flow steering. In SMFS mode, the HW + steering entities are created and manage through the driver without + firmware intervention. + +The ``mlx5`` driver supports reloading via ``DEVLINK_CMD_RELOAD`` + +Info versions +============= + +The ``mlx5`` driver reports the following versions + +.. list-table:: devlink info versions implemented + :widths: 5 5 90 + + * - Name + - Type + - Description + * - ``fw.psid`` + - fixed + - Used to represent the board id of the device. + * - ``fw.version`` + - stored, running + - Three digit major.minor.subminor firmware version number. diff --git a/Documentation/networking/devlink/mlxsw.rst b/Documentation/networking/devlink/mlxsw.rst new file mode 100644 index 000000000000..cf857cb4ba8f --- /dev/null +++ b/Documentation/networking/devlink/mlxsw.rst @@ -0,0 +1,81 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== +mlxsw devlink support +===================== + +This document describes the devlink features implemented by the ``mlxsw`` +device driver. + +Parameters +========== + +.. list-table:: Generic parameters implemented + + * - Name + - Mode + * - ``fw_load_policy`` + - driverinit + +The ``mlxsw`` driver also implements the following driver-specific +parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``acl_region_rehash_interval`` + - u32 + - runtime + - Sets an interval for periodic ACL region rehashes. The value is + specified in milliseconds, with a minimum of ``3000``. The value of + ``0`` disables periodic work entirely. The first rehash will be run + immediately after the value is set. + +The ``mlxsw`` driver supports reloading via ``DEVLINK_CMD_RELOAD`` + +Info versions +============= + +The ``mlxsw`` driver reports the following versions + +.. list-table:: devlink info versions implemented + :widths: 5 5 90 + + * - Name + - Type + - Description + * - ``hw.revision`` + - fixed + - The hardware revision for this board + * - ``fw.psid`` + - fixed + - Firmware PSID + * - ``fw.version`` + - running + - Three digit firmware version + +Driver-specific Traps +===================== + +.. list-table:: List of Driver-specific Traps Registered by ``mlxsw`` + :widths: 5 5 90 + + * - Name + - Type + - Description + * - ``irif_disabled`` + - ``drop`` + - Traps packets that the device decided to drop because they need to be + routed from a disabled router interface (RIF). This can happen during + RIF dismantle, when the RIF is first disabled before being removed + completely + * - ``erif_disabled`` + - ``drop`` + - Traps packets that the device decided to drop because they need to be + routed through a disabled router interface (RIF). This can happen during + RIF dismantle, when the RIF is first disabled before being removed + completely diff --git a/Documentation/networking/devlink/mv88e6xxx.rst b/Documentation/networking/devlink/mv88e6xxx.rst new file mode 100644 index 000000000000..c621212a47a1 --- /dev/null +++ b/Documentation/networking/devlink/mv88e6xxx.rst @@ -0,0 +1,28 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================= +mv88e6xxx devlink support +========================= + +This document describes the devlink features implemented by the ``mv88e6xxx`` +device driver. + +Parameters +========== + +The ``mv88e6xxx`` driver implements the following driver-specific parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``ATU_hash`` + - u8 + - runtime + - Select one of four possible hashing algorithms for MAC addresses in + the Address Translation Unit. A value of 3 may work better than the + default of 1 when many MAC addresses have the same OUI. Only the + values 0 to 3 are valid for this parameter. diff --git a/Documentation/networking/devlink/netdevsim.rst b/Documentation/networking/devlink/netdevsim.rst new file mode 100644 index 000000000000..2a266b7e7b38 --- /dev/null +++ b/Documentation/networking/devlink/netdevsim.rst @@ -0,0 +1,72 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================= +netdevsim devlink support +========================= + +This document describes the ``devlink`` features supported by the +``netdevsim`` device driver. + +Parameters +========== + +.. list-table:: Generic parameters implemented + + * - Name + - Mode + * - ``max_macs`` + - driverinit + +The ``netdevsim`` driver also implements the following driver-specific +parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``test1`` + - Boolean + - driverinit + - Test parameter used to show how a driver-specific devlink parameter + can be implemented. + +The ``netdevsim`` driver supports reloading via ``DEVLINK_CMD_RELOAD`` + +Regions +======= + +The ``netdevsim`` driver exposes a ``dummy`` region as an example of how the +devlink-region interfaces work. A snapshot is taken whenever the +``take_snapshot`` debugfs file is written to. + +Resources +========= + +The ``netdevsim`` driver exposes resources to control the number of FIB +entries and FIB rule entries that the driver will allow. + +.. code:: shell + + $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 + $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 + $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 + $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 + $ devlink dev reload netdevsim/netdevsim0 + +Driver-specific Traps +===================== + +.. list-table:: List of Driver-specific Traps Registered by ``netdevsim`` + :widths: 5 5 90 + + * - Name + - Type + - Description + * - ``fid_miss`` + - ``exception`` + - When a packet enters the device it is classified to a filtering + indentifier (FID) based on the ingress port and VLAN. This trap is used + to trap packets for which a FID could not be found diff --git a/Documentation/networking/devlink/nfp.rst b/Documentation/networking/devlink/nfp.rst new file mode 100644 index 000000000000..a1717db0dfcc --- /dev/null +++ b/Documentation/networking/devlink/nfp.rst @@ -0,0 +1,65 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +nfp devlink support +=================== + +This document describes the devlink features implemented by the ``nfp`` +device driver. + +Parameters +========== + +.. list-table:: Generic parameters implemented + + * - Name + - Mode + * - ``fw_load_policy`` + - permanent + * - ``reset_dev_on_drv_probe`` + - permanent + +Info versions +============= + +The ``nfp`` driver reports the following versions + +.. list-table:: devlink info versions implemented + :widths: 5 5 90 + + * - Name + - Type + - Description + * - ``board.id`` + - fixed + - Part number identifying the board design + * - ``board.rev`` + - fixed + - Revision of the board design + * - ``board.manufacture`` + - fixed + - Vendor of the board design + * - ``board.model`` + - fixed + - Model name of the board design + * - ``fw.bundle_id`` + - stored, running + - Firmware bundle id + * - ``fw.mgmt`` + - stored, running + - Version of the management firmware + * - ``fw.cpld`` + - stored, running + - The CPLD firmware component version + * - ``fw.app`` + - stored, running + - The APP firmware component version + * - ``fw.undi`` + - stored, running + - The UNDI firmware component version + * - ``fw.ncsi`` + - stored, running + - The NSCI firmware component version + * - ``chip.init`` + - stored, running + - The CFGR firmware component version diff --git a/Documentation/networking/devlink/qed.rst b/Documentation/networking/devlink/qed.rst new file mode 100644 index 000000000000..805c6f63621a --- /dev/null +++ b/Documentation/networking/devlink/qed.rst @@ -0,0 +1,26 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +qed devlink support +=================== + +This document describes the devlink features implemented by the ``qed`` core +device driver. + +Parameters +========== + +The ``qed`` driver implements the following driver-specific parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``iwarp_cmt`` + - Boolean + - runtime + - Enable iWARP functionality for 100g devices. Note that this impacts + L2 performance, and is therefore not enabled by default. diff --git a/Documentation/networking/devlink/ti-cpsw-switch.rst b/Documentation/networking/devlink/ti-cpsw-switch.rst new file mode 100644 index 000000000000..dc399e32abaa --- /dev/null +++ b/Documentation/networking/devlink/ti-cpsw-switch.rst @@ -0,0 +1,31 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================== +ti-cpsw-switch devlink support +============================== + +This document describes the devlink features implemented by the ``ti-cpsw-switch`` +device driver. + +Parameters +========== + +The ``ti-cpsw-switch`` driver implements the following driver-specific +parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``ale_bypass`` + - Boolean + - runtime + - Enables ALE_CONTROL(4).BYPASS mode for debugging purposes. In this + mode, all packets will be sent to the host port only. + * - ``switch_mode`` + - Boolean + - runtime + - Enable switch mode diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst new file mode 100644 index 000000000000..f1f868479ceb --- /dev/null +++ b/Documentation/networking/ethtool-netlink.rst @@ -0,0 +1,618 @@ +============================= +Netlink interface for ethtool +============================= + + +Basic information +================= + +Netlink interface for ethtool uses generic netlink family ``ethtool`` +(userspace application should use macros ``ETHTOOL_GENL_NAME`` and +``ETHTOOL_GENL_VERSION`` defined in ``<linux/ethtool_netlink.h>`` uapi +header). This family does not use a specific header, all information in +requests and replies is passed using netlink attributes. + +The ethtool netlink interface uses extended ACK for error and warning +reporting, userspace application developers are encouraged to make these +messages available to user in a suitable way. + +Requests can be divided into three categories: "get" (retrieving information), +"set" (setting parameters) and "action" (invoking an action). + +All "set" and "action" type requests require admin privileges +(``CAP_NET_ADMIN`` in the namespace). Most "get" type requests are allowed for +anyone but there are exceptions (where the response contains sensitive +information). In some cases, the request as such is allowed for anyone but +unprivileged users have attributes with sensitive information (e.g. +wake-on-lan password) omitted. + + +Conventions +=========== + +Attributes which represent a boolean value usually use NLA_U8 type so that we +can distinguish three states: "on", "off" and "not present" (meaning the +information is not available in "get" requests or value is not to be changed +in "set" requests). For these attributes, the "true" value should be passed as +number 1 but any non-zero value should be understood as "true" by recipient. +In the tables below, "bool" denotes NLA_U8 attributes interpreted in this way. + +In the message structure descriptions below, if an attribute name is suffixed +with "+", parent nest can contain multiple attributes of the same type. This +implements an array of entries. + + +Request header +============== + +Each request or reply message contains a nested attribute with common header. +Structure of this header is + + ============================== ====== ============================= + ``ETHTOOL_A_HEADER_DEV_INDEX`` u32 device ifindex + ``ETHTOOL_A_HEADER_DEV_NAME`` string device name + ``ETHTOOL_A_HEADER_FLAGS`` u32 flags common for all requests + ============================== ====== ============================= + +``ETHTOOL_A_HEADER_DEV_INDEX`` and ``ETHTOOL_A_HEADER_DEV_NAME`` identify the +device message relates to. One of them is sufficient in requests, if both are +used, they must identify the same device. Some requests, e.g. global string +sets, do not require device identification. Most ``GET`` requests also allow +dump requests without device identification to query the same information for +all devices providing it (each device in a separate message). + +``ETHTOOL_A_HEADER_FLAGS`` is a bitmap of request flags common for all request +types. The interpretation of these flags is the same for all request types but +the flags may not apply to requests. Recognized flags are: + + ================================= =================================== + ``ETHTOOL_FLAG_COMPACT_BITSETS`` use compact format bitsets in reply + ``ETHTOOL_FLAG_OMIT_REPLY`` omit optional reply (_SET and _ACT) + ================================= =================================== + +New request flags should follow the general idea that if the flag is not set, +the behaviour is backward compatible, i.e. requests from old clients not aware +of the flag should be interpreted the way the client expects. A client must +not set flags it does not understand. + + +Bit sets +======== + +For short bitmaps of (reasonably) fixed length, standard ``NLA_BITFIELD32`` +type is used. For arbitrary length bitmaps, ethtool netlink uses a nested +attribute with contents of one of two forms: compact (two binary bitmaps +representing bit values and mask of affected bits) and bit-by-bit (list of +bits identified by either index or name). + +Verbose (bit-by-bit) bitsets allow sending symbolic names for bits together +with their values which saves a round trip (when the bitset is passed in a +request) or at least a second request (when the bitset is in a reply). This is +useful for one shot applications like traditional ethtool command. On the +other hand, long running applications like ethtool monitor (displaying +notifications) or network management daemons may prefer fetching the names +only once and using compact form to save message size. Notifications from +ethtool netlink interface always use compact form for bitsets. + +A bitset can represent either a value/mask pair (``ETHTOOL_A_BITSET_NOMASK`` +not set) or a single bitmap (``ETHTOOL_A_BITSET_NOMASK`` set). In requests +modifying a bitmap, the former changes the bit set in mask to values set in +value and preserves the rest; the latter sets the bits set in the bitmap and +clears the rest. + +Compact form: nested (bitset) atrribute contents: + + ============================ ====== ============================ + ``ETHTOOL_A_BITSET_NOMASK`` flag no mask, only a list + ``ETHTOOL_A_BITSET_SIZE`` u32 number of significant bits + ``ETHTOOL_A_BITSET_VALUE`` binary bitmap of bit values + ``ETHTOOL_A_BITSET_MASK`` binary bitmap of valid bits + ============================ ====== ============================ + +Value and mask must have length at least ``ETHTOOL_A_BITSET_SIZE`` bits +rounded up to a multiple of 32 bits. They consist of 32-bit words in host byte +order, words ordered from least significant to most significant (i.e. the same +way as bitmaps are passed with ioctl interface). + +For compact form, ``ETHTOOL_A_BITSET_SIZE`` and ``ETHTOOL_A_BITSET_VALUE`` are +mandatory. ``ETHTOOL_A_BITSET_MASK`` attribute is mandatory if +``ETHTOOL_A_BITSET_NOMASK`` is not set (bitset represents a value/mask pair); +if ``ETHTOOL_A_BITSET_NOMASK`` is not set, ``ETHTOOL_A_BITSET_MASK`` is not +allowed (bitset represents a single bitmap. + +Kernel bit set length may differ from userspace length if older application is +used on newer kernel or vice versa. If userspace bitmap is longer, an error is +issued only if the request actually tries to set values of some bits not +recognized by kernel. + +Bit-by-bit form: nested (bitset) attribute contents: + + +------------------------------------+--------+-----------------------------+ + | ``ETHTOOL_A_BITSET_NOMASK`` | flag | no mask, only a list | + +------------------------------------+--------+-----------------------------+ + | ``ETHTOOL_A_BITSET_SIZE`` | u32 | number of significant bits | + +------------------------------------+--------+-----------------------------+ + | ``ETHTOOL_A_BITSET_BITS`` | nested | array of bits | + +-+----------------------------------+--------+-----------------------------+ + | | ``ETHTOOL_A_BITSET_BITS_BIT+`` | nested | one bit | + +-+-+--------------------------------+--------+-----------------------------+ + | | | ``ETHTOOL_A_BITSET_BIT_INDEX`` | u32 | bit index (0 for LSB) | + +-+-+--------------------------------+--------+-----------------------------+ + | | | ``ETHTOOL_A_BITSET_BIT_NAME`` | string | bit name | + +-+-+--------------------------------+--------+-----------------------------+ + | | | ``ETHTOOL_A_BITSET_BIT_VALUE`` | flag | present if bit is set | + +-+-+--------------------------------+--------+-----------------------------+ + +Bit size is optional for bit-by-bit form. ``ETHTOOL_A_BITSET_BITS`` nest can +only contain ``ETHTOOL_A_BITSET_BITS_BIT`` attributes but there can be an +arbitrary number of them. A bit may be identified by its index or by its +name. When used in requests, listed bits are set to 0 or 1 according to +``ETHTOOL_A_BITSET_BIT_VALUE``, the rest is preserved. A request fails if +index exceeds kernel bit length or if name is not recognized. + +When ``ETHTOOL_A_BITSET_NOMASK`` flag is present, bitset is interpreted as +a simple bitmap. ``ETHTOOL_A_BITSET_BIT_VALUE`` attributes are not used in +such case. Such bitset represents a bitmap with listed bits set and the rest +zero. + +In requests, application can use either form. Form used by kernel in reply is +determined by ``ETHTOOL_FLAG_COMPACT_BITSETS`` flag in flags field of request +header. Semantics of value and mask depends on the attribute. + + +List of message types +===================== + +All constants identifying message types use ``ETHTOOL_CMD_`` prefix and suffix +according to message purpose: + + ============== ====================================== + ``_GET`` userspace request to retrieve data + ``_SET`` userspace request to set data + ``_ACT`` userspace request to perform an action + ``_GET_REPLY`` kernel reply to a ``GET`` request + ``_SET_REPLY`` kernel reply to a ``SET`` request + ``_ACT_REPLY`` kernel reply to an ``ACT`` request + ``_NTF`` kernel notification + ============== ====================================== + +Userspace to kernel: + + ===================================== ================================ + ``ETHTOOL_MSG_STRSET_GET`` get string set + ``ETHTOOL_MSG_LINKINFO_GET`` get link settings + ``ETHTOOL_MSG_LINKINFO_SET`` set link settings + ``ETHTOOL_MSG_LINKMODES_GET`` get link modes info + ``ETHTOOL_MSG_LINKMODES_SET`` set link modes info + ``ETHTOOL_MSG_LINKSTATE_GET`` get link state + ``ETHTOOL_MSG_DEBUG_GET`` get debugging settings + ``ETHTOOL_MSG_DEBUG_SET`` set debugging settings + ``ETHTOOL_MSG_WOL_GET`` get wake-on-lan settings + ``ETHTOOL_MSG_WOL_SET`` set wake-on-lan settings + ===================================== ================================ + +Kernel to userspace: + + ===================================== ================================= + ``ETHTOOL_MSG_STRSET_GET_REPLY`` string set contents + ``ETHTOOL_MSG_LINKINFO_GET_REPLY`` link settings + ``ETHTOOL_MSG_LINKINFO_NTF`` link settings notification + ``ETHTOOL_MSG_LINKMODES_GET_REPLY`` link modes info + ``ETHTOOL_MSG_LINKMODES_NTF`` link modes notification + ``ETHTOOL_MSG_LINKSTATE_GET_REPLY`` link state info + ``ETHTOOL_MSG_DEBUG_GET_REPLY`` debugging settings + ``ETHTOOL_MSG_DEBUG_NTF`` debugging settings notification + ``ETHTOOL_MSG_WOL_GET_REPLY`` wake-on-lan settings + ``ETHTOOL_MSG_WOL_NTF`` wake-on-lan settings notification + ===================================== ================================= + +``GET`` requests are sent by userspace applications to retrieve device +information. They usually do not contain any message specific attributes. +Kernel replies with corresponding "GET_REPLY" message. For most types, ``GET`` +request with ``NLM_F_DUMP`` and no device identification can be used to query +the information for all devices supporting the request. + +If the data can be also modified, corresponding ``SET`` message with the same +layout as corresponding ``GET_REPLY`` is used to request changes. Only +attributes where a change is requested are included in such request (also, not +all attributes may be changed). Replies to most ``SET`` request consist only +of error code and extack; if kernel provides additional data, it is sent in +the form of corresponding ``SET_REPLY`` message which can be suppressed by +setting ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header. + +Data modification also triggers sending a ``NTF`` message with a notification. +These usually bear only a subset of attributes which was affected by the +change. The same notification is issued if the data is modified using other +means (mostly ioctl ethtool interface). Unlike notifications from ethtool +netlink code which are only sent if something actually changed, notifications +triggered by ioctl interface may be sent even if the request did not actually +change any data. + +``ACT`` messages request kernel (driver) to perform a specific action. If some +information is reported by kernel (which can be suppressed by setting +``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header), the reply takes form of +an ``ACT_REPLY`` message. Performing an action also triggers a notification +(``NTF`` message). + +Later sections describe the format and semantics of these messages. + + +STRSET_GET +========== + +Requests contents of a string set as provided by ioctl commands +``ETHTOOL_GSSET_INFO`` and ``ETHTOOL_GSTRINGS.`` String sets are not user +writeable so that the corresponding ``STRSET_SET`` message is only used in +kernel replies. There are two types of string sets: global (independent of +a device, e.g. device feature names) and device specific (e.g. device private +flags). + +Request contents: + + +---------------------------------------+--------+------------------------+ + | ``ETHTOOL_A_STRSET_HEADER`` | nested | request header | + +---------------------------------------+--------+------------------------+ + | ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | string set to request | + +-+-------------------------------------+--------+------------------------+ + | | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set | + +-+-+-----------------------------------+--------+------------------------+ + | | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id | + +-+-+-----------------------------------+--------+------------------------+ + +Kernel response contents: + + +---------------------------------------+--------+-----------------------+ + | ``ETHTOOL_A_STRSET_HEADER`` | nested | reply header | + +---------------------------------------+--------+-----------------------+ + | ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | array of string sets | + +-+-------------------------------------+--------+-----------------------+ + | | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set | + +-+-+-----------------------------------+--------+-----------------------+ + | | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id | + +-+-+-----------------------------------+--------+-----------------------+ + | | | ``ETHTOOL_A_STRINGSET_COUNT`` | u32 | number of strings | + +-+-+-----------------------------------+--------+-----------------------+ + | | | ``ETHTOOL_A_STRINGSET_STRINGS`` | nested | array of strings | + +-+-+-+---------------------------------+--------+-----------------------+ + | | | | ``ETHTOOL_A_STRINGS_STRING+`` | nested | one string | + +-+-+-+-+-------------------------------+--------+-----------------------+ + | | | | | ``ETHTOOL_A_STRING_INDEX`` | u32 | string index | + +-+-+-+-+-------------------------------+--------+-----------------------+ + | | | | | ``ETHTOOL_A_STRING_VALUE`` | string | string value | + +-+-+-+-+-------------------------------+--------+-----------------------+ + | ``ETHTOOL_A_STRSET_COUNTS_ONLY`` | flag | return only counts | + +---------------------------------------+--------+-----------------------+ + +Device identification in request header is optional. Depending on its presence +a and ``NLM_F_DUMP`` flag, there are three type of ``STRSET_GET`` requests: + + - no ``NLM_F_DUMP,`` no device: get "global" stringsets + - no ``NLM_F_DUMP``, with device: get string sets related to the device + - ``NLM_F_DUMP``, no device: get device related string sets for all devices + +If there is no ``ETHTOOL_A_STRSET_STRINGSETS`` array, all string sets of +requested type are returned, otherwise only those specified in the request. +Flag ``ETHTOOL_A_STRSET_COUNTS_ONLY`` tells kernel to only return string +counts of the sets, not the actual strings. + + +LINKINFO_GET +============ + +Requests link settings as provided by ``ETHTOOL_GLINKSETTINGS`` except for +link modes and autonegotiation related information. The request does not use +any attributes. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_LINKINFO_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_LINKINFO_HEADER`` nested reply header + ``ETHTOOL_A_LINKINFO_PORT`` u8 physical port + ``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address + ``ETHTOOL_A_LINKINFO_TP_MDIX`` u8 MDI(-X) status + ``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control + ``ETHTOOL_A_LINKINFO_TRANSCEIVER`` u8 transceiver + ==================================== ====== ========================== + +Attributes and their values have the same meaning as matching members of the +corresponding ioctl structures. + +``LINKINFO_GET`` allows dump requests (kernel returns reply message for all +devices supporting the request). + + +LINKINFO_SET +============ + +``LINKINFO_SET`` request allows setting some of the attributes reported by +``LINKINFO_GET``. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_LINKINFO_HEADER`` nested request header + ``ETHTOOL_A_LINKINFO_PORT`` u8 physical port + ``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address + ``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control + ==================================== ====== ========================== + +MDI(-X) status and transceiver cannot be set, request with the corresponding +attributes is rejected. + + +LINKMODES_GET +============= + +Requests link modes (supported, advertised and peer advertised) and related +information (autonegotiation status, link speed and duplex) as provided by +``ETHTOOL_GLINKSETTINGS``. The request does not use any attributes. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_LINKMODES_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_LINKMODES_HEADER`` nested reply header + ``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status + ``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes + ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes + ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s) + ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode + ==================================== ====== ========================== + +For ``ETHTOOL_A_LINKMODES_OURS``, value represents advertised modes and mask +represents supported modes. ``ETHTOOL_A_LINKMODES_PEER`` in the reply is a bit +list. + +``LINKMODES_GET`` allows dump requests (kernel returns reply messages for all +devices supporting the request). + + +LINKMODES_SET +============= + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_LINKMODES_HEADER`` nested request header + ``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status + ``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes + ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes + ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s) + ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode + ==================================== ====== ========================== + +``ETHTOOL_A_LINKMODES_OURS`` bit set allows setting advertised link modes. If +autonegotiation is on (either set now or kept from before), advertised modes +are not changed (no ``ETHTOOL_A_LINKMODES_OURS`` attribute) and at least one +of speed and duplex is specified, kernel adjusts advertised modes to all +supported modes matching speed, duplex or both (whatever is specified). This +autoselection is done on ethtool side with ioctl interface, netlink interface +is supposed to allow requesting changes without knowing what exactly kernel +supports. + + +LINKSTATE_GET +============= + +Requests link state information. At the moment, only link up/down flag (as +provided by ``ETHTOOL_GLINK`` ioctl command) is provided but some future +extensions are planned (e.g. link down reason). This request does not have any +attributes. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_LINKSTATE_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_LINKSTATE_HEADER`` nested reply header + ``ETHTOOL_A_LINKSTATE_LINK`` bool link state (up/down) + ==================================== ====== ========================== + +For most NIC drivers, the value of ``ETHTOOL_A_LINKSTATE_LINK`` returns +carrier flag provided by ``netif_carrier_ok()`` but there are drivers which +define their own handler. + +``LINKSTATE_GET`` allows dump requests (kernel returns reply messages for all +devices supporting the request). + + +DEBUG_GET +========= + +Requests debugging settings of a device. At the moment, only message mask is +provided. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_DEBUG_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_DEBUG_HEADER`` nested reply header + ``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask + ==================================== ====== ========================== + +The message mask (``ETHTOOL_A_DEBUG_MSGMASK``) is equal to message level as +provided by ``ETHTOOL_GMSGLVL`` and set by ``ETHTOOL_SMSGLVL`` in ioctl +interface. While it is called message level there for historical reasons, most +drivers and almost all newer drivers use it as a mask of enabled message +classes (represented by ``NETIF_MSG_*`` constants); therefore netlink +interface follows its actual use in practice. + +``DEBUG_GET`` allows dump requests (kernel returns reply messages for all +devices supporting the request). + + +DEBUG_SET +========= + +Set or update debugging settings of a device. At the moment, only message mask +is supported. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_DEBUG_HEADER`` nested request header + ``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask + ==================================== ====== ========================== + +``ETHTOOL_A_DEBUG_MSGMASK`` bit set allows setting or modifying mask of +enabled debugging message types for the device. + + +WOL_GET +======= + +Query device wake-on-lan settings. Unlike most "GET" type requests, +``ETHTOOL_MSG_WOL_GET`` requires (netns) ``CAP_NET_ADMIN`` privileges as it +(potentially) provides SecureOn(tm) password which is confidential. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_WOL_HEADER`` nested request header + ==================================== ====== ========================== + +Kernel response contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_WOL_HEADER`` nested reply header + ``ETHTOOL_A_WOL_MODES`` bitset mask of enabled WoL modes + ``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password + ==================================== ====== ========================== + +In reply, ``ETHTOOL_A_WOL_MODES`` mask consists of modes supported by the +device, value of modes which are enabled. ``ETHTOOL_A_WOL_SOPASS`` is only +included in reply if ``WAKE_MAGICSECURE`` mode is supported. + + +WOL_SET +======= + +Set or update wake-on-lan settings. + +Request contents: + + ==================================== ====== ========================== + ``ETHTOOL_A_WOL_HEADER`` nested request header + ``ETHTOOL_A_WOL_MODES`` bitset enabled WoL modes + ``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password + ==================================== ====== ========================== + +``ETHTOOL_A_WOL_SOPASS`` is only allowed for devices supporting +``WAKE_MAGICSECURE`` mode. + + +Request translation +=================== + +The following table maps ioctl commands to netlink commands providing their +functionality. Entries with "n/a" in right column are commands which do not +have their netlink replacement yet. + + =================================== ===================================== + ioctl command netlink command + =================================== ===================================== + ``ETHTOOL_GSET`` ``ETHTOOL_MSG_LINKINFO_GET`` + ``ETHTOOL_MSG_LINKMODES_GET`` + ``ETHTOOL_SSET`` ``ETHTOOL_MSG_LINKINFO_SET`` + ``ETHTOOL_MSG_LINKMODES_SET`` + ``ETHTOOL_GDRVINFO`` n/a + ``ETHTOOL_GREGS`` n/a + ``ETHTOOL_GWOL`` ``ETHTOOL_MSG_WOL_GET`` + ``ETHTOOL_SWOL`` ``ETHTOOL_MSG_WOL_SET`` + ``ETHTOOL_GMSGLVL`` ``ETHTOOL_MSG_DEBUG_GET`` + ``ETHTOOL_SMSGLVL`` ``ETHTOOL_MSG_DEBUG_SET`` + ``ETHTOOL_NWAY_RST`` n/a + ``ETHTOOL_GLINK`` ``ETHTOOL_MSG_LINKSTATE_GET`` + ``ETHTOOL_GEEPROM`` n/a + ``ETHTOOL_SEEPROM`` n/a + ``ETHTOOL_GCOALESCE`` n/a + ``ETHTOOL_SCOALESCE`` n/a + ``ETHTOOL_GRINGPARAM`` n/a + ``ETHTOOL_SRINGPARAM`` n/a + ``ETHTOOL_GPAUSEPARAM`` n/a + ``ETHTOOL_SPAUSEPARAM`` n/a + ``ETHTOOL_GRXCSUM`` n/a + ``ETHTOOL_SRXCSUM`` n/a + ``ETHTOOL_GTXCSUM`` n/a + ``ETHTOOL_STXCSUM`` n/a + ``ETHTOOL_GSG`` n/a + ``ETHTOOL_SSG`` n/a + ``ETHTOOL_TEST`` n/a + ``ETHTOOL_GSTRINGS`` ``ETHTOOL_MSG_STRSET_GET`` + ``ETHTOOL_PHYS_ID`` n/a + ``ETHTOOL_GSTATS`` n/a + ``ETHTOOL_GTSO`` n/a + ``ETHTOOL_STSO`` n/a + ``ETHTOOL_GPERMADDR`` rtnetlink ``RTM_GETLINK`` + ``ETHTOOL_GUFO`` n/a + ``ETHTOOL_SUFO`` n/a + ``ETHTOOL_GGSO`` n/a + ``ETHTOOL_SGSO`` n/a + ``ETHTOOL_GFLAGS`` n/a + ``ETHTOOL_SFLAGS`` n/a + ``ETHTOOL_GPFLAGS`` n/a + ``ETHTOOL_SPFLAGS`` n/a + ``ETHTOOL_GRXFH`` n/a + ``ETHTOOL_SRXFH`` n/a + ``ETHTOOL_GGRO`` n/a + ``ETHTOOL_SGRO`` n/a + ``ETHTOOL_GRXRINGS`` n/a + ``ETHTOOL_GRXCLSRLCNT`` n/a + ``ETHTOOL_GRXCLSRULE`` n/a + ``ETHTOOL_GRXCLSRLALL`` n/a + ``ETHTOOL_SRXCLSRLDEL`` n/a + ``ETHTOOL_SRXCLSRLINS`` n/a + ``ETHTOOL_FLASHDEV`` n/a + ``ETHTOOL_RESET`` n/a + ``ETHTOOL_SRXNTUPLE`` n/a + ``ETHTOOL_GRXNTUPLE`` n/a + ``ETHTOOL_GSSET_INFO`` ``ETHTOOL_MSG_STRSET_GET`` + ``ETHTOOL_GRXFHINDIR`` n/a + ``ETHTOOL_SRXFHINDIR`` n/a + ``ETHTOOL_GFEATURES`` n/a + ``ETHTOOL_SFEATURES`` n/a + ``ETHTOOL_GCHANNELS`` n/a + ``ETHTOOL_SCHANNELS`` n/a + ``ETHTOOL_SET_DUMP`` n/a + ``ETHTOOL_GET_DUMP_FLAG`` n/a + ``ETHTOOL_GET_DUMP_DATA`` n/a + ``ETHTOOL_GET_TS_INFO`` n/a + ``ETHTOOL_GMODULEINFO`` n/a + ``ETHTOOL_GMODULEEEPROM`` n/a + ``ETHTOOL_GEEE`` n/a + ``ETHTOOL_SEEE`` n/a + ``ETHTOOL_GRSSH`` n/a + ``ETHTOOL_SRSSH`` n/a + ``ETHTOOL_GTUNABLE`` n/a + ``ETHTOOL_STUNABLE`` n/a + ``ETHTOOL_GPHYSTATS`` n/a + ``ETHTOOL_PERQUEUE`` n/a + ``ETHTOOL_GLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_GET`` + ``ETHTOOL_MSG_LINKMODES_GET`` + ``ETHTOOL_SLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_SET`` + ``ETHTOOL_MSG_LINKMODES_SET`` + ``ETHTOOL_PHY_GTUNABLE`` n/a + ``ETHTOOL_PHY_STUNABLE`` n/a + ``ETHTOOL_GFECPARAM`` n/a + ``ETHTOOL_SFECPARAM`` n/a + =================================== ===================================== diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index 5acab1290e03..d07d9855dcd3 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -13,9 +13,8 @@ Contents: can_ucan_protocol device_drivers/index dsa/index - devlink-info-versions - devlink-trap - devlink-trap-netdevsim + devlink/index + ethtool-netlink ieee802154 j1939 kapi diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 48ccb1b31160..5f53faff4e25 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -479,6 +479,10 @@ tcp_no_metrics_save - BOOLEAN degradation. If set, TCP will not cache metrics on closing connections. +tcp_no_ssthresh_metrics_save - BOOLEAN + Controls whether TCP saves ssthresh metrics in the route cache. + Default is 1, which disables ssthresh metrics. + tcp_orphan_retries - INTEGER This value influences the timeout of a locally closed TCP connection, when RTO retransmissions remain unacknowledged. diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst index e0a7c7af6525..1e4735cc0553 100644 --- a/Documentation/networking/phy.rst +++ b/Documentation/networking/phy.rst @@ -267,6 +267,24 @@ Some of the interface modes are described below: duplex, pause or other settings. This is dependent on the MAC and/or PHY behaviour. +``PHY_INTERFACE_MODE_10GBASER`` + This is the IEEE 802.3 Clause 49 defined 10GBASE-R protocol used with + various different mediums. Please refer to the IEEE standard for a + definition of this. + + Note: 10GBASE-R is just one protocol that can be used with XFI and SFI. + XFI and SFI permit multiple protocols over a single SERDES lane, and + also defines the electrical characteristics of the signals with a host + compliance board plugged into the host XFP/SFP connector. Therefore, + XFI and SFI are not PHY interface types in their own right. + +``PHY_INTERFACE_MODE_10GKR`` + This is the IEEE 802.3 Clause 49 defined 10GBASE-R with Clause 73 + autonegotiation. Please refer to the IEEE standard for further + information. + + Note: due to legacy usage, some 10GBASE-R usage incorrectly makes + use of this definition. Pause frames / flow control =========================== diff --git a/Documentation/networking/sfp-phylink.rst b/Documentation/networking/sfp-phylink.rst index a5e00a159d21..d753a309f9d1 100644 --- a/Documentation/networking/sfp-phylink.rst +++ b/Documentation/networking/sfp-phylink.rst @@ -251,7 +251,8 @@ this documentation. phylink_mac_change(priv->phylink, link_is_up); where ``link_is_up`` is true if the link is currently up or false - otherwise. + otherwise. If a MAC is unable to provide these interrupts, then + it should set ``priv->phylink_config.pcs_poll = true;`` in step 9. 11. Verify that the driver does not call:: diff --git a/Documentation/padata.txt b/Documentation/padata.txt deleted file mode 100644 index b37ba1eaace3..000000000000 --- a/Documentation/padata.txt +++ /dev/null @@ -1,163 +0,0 @@ -======================================= -The padata parallel execution mechanism -======================================= - -:Last updated: for 2.6.36 - -Padata is a mechanism by which the kernel can farm work out to be done in -parallel on multiple CPUs while retaining the ordering of tasks. It was -developed for use with the IPsec code, which needs to be able to perform -encryption and decryption on large numbers of packets without reordering -those packets. The crypto developers made a point of writing padata in a -sufficiently general fashion that it could be put to other uses as well. - -The first step in using padata is to set up a padata_instance structure for -overall control of how tasks are to be run:: - - #include <linux/padata.h> - - struct padata_instance *padata_alloc(const char *name, - const struct cpumask *pcpumask, - const struct cpumask *cbcpumask); - -'name' simply identifies the instance. - -The pcpumask describes which processors will be used to execute work -submitted to this instance in parallel. The cbcpumask defines which -processors are allowed to be used as the serialization callback processor. -The workqueue wq is where the work will actually be done; it should be -a multithreaded queue, naturally. - -To allocate a padata instance with the cpu_possible_mask for both -cpumasks this helper function can be used:: - - struct padata_instance *padata_alloc_possible(struct workqueue_struct *wq); - -Note: Padata maintains two kinds of cpumasks internally. The user supplied -cpumasks, submitted by padata_alloc/padata_alloc_possible and the 'usable' -cpumasks. The usable cpumasks are always a subset of active CPUs in the -user supplied cpumasks; these are the cpumasks padata actually uses. So -it is legal to supply a cpumask to padata that contains offline CPUs. -Once an offline CPU in the user supplied cpumask comes online, padata -is going to use it. - -There are functions for enabling and disabling the instance:: - - int padata_start(struct padata_instance *pinst); - void padata_stop(struct padata_instance *pinst); - -These functions are setting or clearing the "PADATA_INIT" flag; -if that flag is not set, other functions will refuse to work. -padata_start returns zero on success (flag set) or -EINVAL if the -padata cpumask contains no active CPU (flag not set). -padata_stop clears the flag and blocks until the padata instance -is unused. - -The list of CPUs to be used can be adjusted with these functions:: - - int padata_set_cpumasks(struct padata_instance *pinst, - cpumask_var_t pcpumask, - cpumask_var_t cbcpumask); - int padata_set_cpumask(struct padata_instance *pinst, int cpumask_type, - cpumask_var_t cpumask); - int padata_add_cpu(struct padata_instance *pinst, int cpu, int mask); - int padata_remove_cpu(struct padata_instance *pinst, int cpu, int mask); - -Changing the CPU masks are expensive operations, though, so it should not be -done with great frequency. - -It's possible to change both cpumasks of a padata instance with -padata_set_cpumasks by specifying the cpumasks for parallel execution (pcpumask) -and for the serial callback function (cbcpumask). padata_set_cpumask is used to -change just one of the cpumasks. Here cpumask_type is one of PADATA_CPU_SERIAL, -PADATA_CPU_PARALLEL and cpumask specifies the new cpumask to use. -To simply add or remove one CPU from a certain cpumask the functions -padata_add_cpu/padata_remove_cpu are used. cpu specifies the CPU to add or -remove and mask is one of PADATA_CPU_SERIAL, PADATA_CPU_PARALLEL. - -If a user is interested in padata cpumask changes, he can register to -the padata cpumask change notifier:: - - int padata_register_cpumask_notifier(struct padata_instance *pinst, - struct notifier_block *nblock); - -To unregister from that notifier:: - - int padata_unregister_cpumask_notifier(struct padata_instance *pinst, - struct notifier_block *nblock); - -The padata cpumask change notifier notifies about changes of the usable -cpumasks, i.e. the subset of active CPUs in the user supplied cpumask. - -Padata calls the notifier chain with:: - - blocking_notifier_call_chain(&pinst->cpumask_change_notifier, - notification_mask, - &pd_new->cpumask); - -Here cpumask_change_notifier is registered notifier, notification_mask -is one of PADATA_CPU_SERIAL, PADATA_CPU_PARALLEL and cpumask is a pointer -to a struct padata_cpumask that contains the new cpumask information. - -Actually submitting work to the padata instance requires the creation of a -padata_priv structure:: - - struct padata_priv { - /* Other stuff here... */ - void (*parallel)(struct padata_priv *padata); - void (*serial)(struct padata_priv *padata); - }; - -This structure will almost certainly be embedded within some larger -structure specific to the work to be done. Most of its fields are private to -padata, but the structure should be zeroed at initialisation time, and the -parallel() and serial() functions should be provided. Those functions will -be called in the process of getting the work done as we will see -momentarily. - -The submission of work is done with:: - - int padata_do_parallel(struct padata_instance *pinst, - struct padata_priv *padata, int cb_cpu); - -The pinst and padata structures must be set up as described above; cb_cpu -specifies which CPU will be used for the final callback when the work is -done; it must be in the current instance's CPU mask. The return value from -padata_do_parallel() is zero on success, indicating that the work is in -progress. -EBUSY means that somebody, somewhere else is messing with the -instance's CPU mask, while -EINVAL is a complaint about cb_cpu not being -in that CPU mask or about a not running instance. - -Each task submitted to padata_do_parallel() will, in turn, be passed to -exactly one call to the above-mentioned parallel() function, on one CPU, so -true parallelism is achieved by submitting multiple tasks. parallel() runs with -software interrupts disabled and thus cannot sleep. The parallel() -function gets the padata_priv structure pointer as its lone parameter; -information about the actual work to be done is probably obtained by using -container_of() to find the enclosing structure. - -Note that parallel() has no return value; the padata subsystem assumes that -parallel() will take responsibility for the task from this point. The work -need not be completed during this call, but, if parallel() leaves work -outstanding, it should be prepared to be called again with a new job before -the previous one completes. When a task does complete, parallel() (or -whatever function actually finishes the job) should inform padata of the -fact with a call to:: - - void padata_do_serial(struct padata_priv *padata); - -At some point in the future, padata_do_serial() will trigger a call to the -serial() function in the padata_priv structure. That call will happen on -the CPU requested in the initial call to padata_do_parallel(); it, too, is -run with local software interrupts disabled. -Note that this call may be deferred for a while since the padata code takes -pains to ensure that tasks are completed in the order in which they were -submitted. - -The one remaining function in the padata API should be called to clean up -when a padata instance is no longer needed:: - - void padata_free(struct padata_instance *pinst); - -This function will busy-wait while any remaining tasks are completed, so it -might be best not to call it while there is work outstanding. diff --git a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst index 02aacd69ab96..392875a1b94e 100644 --- a/Documentation/sound/alsa-configuration.rst +++ b/Documentation/sound/alsa-configuration.rst @@ -495,7 +495,8 @@ Module for C-Media CMI8338/8738/8768/8770 PCI sound cards. mpu_port port address of MIDI interface (8338 only): 0x300,0x310,0x320,0x330 = legacy port, - 0 = disable (default) + 1 = integrated PCI port (default on 8738), + 0 = disable fm_port port address of OPL-3 FM synthesizer (8x38 only): 0x388 = legacy port, diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst index ddef812ddf8f..fa4968817696 100644 --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst @@ -259,7 +259,7 @@ to details explained in the following section. { struct mychip *chip; int err; - static struct snd_device_ops ops = { + static const struct snd_device_ops ops = { .dev_free = snd_mychip_dev_free, }; @@ -675,7 +675,7 @@ low-level device with a specified ``ops``, :: - static struct snd_device_ops ops = { + static const struct snd_device_ops ops = { .dev_free = snd_mychip_dev_free, }; .... @@ -761,7 +761,7 @@ destructor and PCI entries. Example code is shown first, below. { struct mychip *chip; int err; - static struct snd_device_ops ops = { + static const struct snd_device_ops ops = { .dev_free = snd_mychip_dev_free, }; @@ -3912,7 +3912,7 @@ For a raw-data proc-file, set the attributes as follows: :: - static struct snd_info_entry_ops my_file_io_ops = { + static const struct snd_info_entry_ops my_file_io_ops = { .read = my_file_io_read, }; diff --git a/Documentation/tee.txt b/Documentation/tee.txt index afacdf2fd1de..c8fad81c4563 100644 --- a/Documentation/tee.txt +++ b/Documentation/tee.txt @@ -112,6 +112,83 @@ kernel are handled by the kernel driver. Other RPC messages will be forwarded to tee-supplicant without further involvement of the driver, except switching shared memory buffer representation. +AMD-TEE driver +============== + +The AMD-TEE driver handles the communication with AMD's TEE environment. The +TEE environment is provided by AMD Secure Processor. + +The AMD Secure Processor (formerly called Platform Security Processor or PSP) +is a dedicated processor that features ARM TrustZone technology, along with a +software-based Trusted Execution Environment (TEE) designed to enable +third-party Trusted Applications. This feature is currently enabled only for +APUs. + +The following picture shows a high level overview of AMD-TEE:: + + | + x86 | + | + User space (Kernel space) | AMD Secure Processor (PSP) + ~~~~~~~~~~ ~~~~~~~~~~~~~~ | ~~~~~~~~~~~~~~~~~~~~~~~~~~ + | + +--------+ | +-------------+ + | Client | | | Trusted | + +--------+ | | Application | + /\ | +-------------+ + || | /\ + || | || + || | \/ + || | +----------+ + || | | TEE | + || | | Internal | + \/ | | API | + +---------+ +-----------+---------+ +----------+ + | TEE | | TEE | AMD-TEE | | AMD-TEE | + | Client | | subsystem | driver | | Trusted | + | API | | | | | OS | + +---------+-----------+----+------+---------+---------+----------+ + | Generic TEE API | | ASP | Mailbox | + | IOCTL (TEE_IOC_*) | | driver | Register Protocol | + +--------------------------+ +---------+--------------------+ + +At the lowest level (in x86), the AMD Secure Processor (ASP) driver uses the +CPU to PSP mailbox regsister to submit commands to the PSP. The format of the +command buffer is opaque to the ASP driver. It's role is to submit commands to +the secure processor and return results to AMD-TEE driver. The interface +between AMD-TEE driver and AMD Secure Processor driver can be found in [6]. + +The AMD-TEE driver packages the command buffer payload for processing in TEE. +The command buffer format for the different TEE commands can be found in [7]. + +The TEE commands supported by AMD-TEE Trusted OS are: +* TEE_CMD_ID_LOAD_TA - loads a Trusted Application (TA) binary into + TEE environment. +* TEE_CMD_ID_UNLOAD_TA - unloads TA binary from TEE environment. +* TEE_CMD_ID_OPEN_SESSION - opens a session with a loaded TA. +* TEE_CMD_ID_CLOSE_SESSION - closes session with loaded TA +* TEE_CMD_ID_INVOKE_CMD - invokes a command with loaded TA +* TEE_CMD_ID_MAP_SHARED_MEM - maps shared memory +* TEE_CMD_ID_UNMAP_SHARED_MEM - unmaps shared memory + +AMD-TEE Trusted OS is the firmware running on AMD Secure Processor. + +The AMD-TEE driver registers itself with TEE subsystem and implements the +following driver function callbacks: + +* get_version - returns the driver implementation id and capability. +* open - sets up the driver context data structure. +* release - frees up driver resources. +* open_session - loads the TA binary and opens session with loaded TA. +* close_session - closes session with loaded TA and unloads it. +* invoke_func - invokes a command with loaded TA. + +cancel_req driver callback is not supported by AMD-TEE. + +The GlobalPlatform TEE Client API [5] can be used by the user space (client) to +talk to AMD's TEE. AMD's TEE provides a secure environment for loading, opening +a session, invoking commands and clossing session with TA. + References ========== @@ -125,3 +202,7 @@ References [5] http://www.globalplatform.org/specificationsdevice.asp look for "TEE Client API Specification v1.0" and click download. + +[6] include/linux/psp-tee.h + +[7] drivers/tee/amdtee/amdtee_if.h diff --git a/Documentation/x86/boot.rst b/Documentation/x86/boot.rst index 90bb8f5ab384..692ce57ac140 100644 --- a/Documentation/x86/boot.rst +++ b/Documentation/x86/boot.rst @@ -251,7 +251,7 @@ setting fields in the header, you must make sure only to set fields supported by the protocol version in use. -Details of Harder Fileds +Details of Header Fields ======================== For each field, some are information from the kernel to the bootloader |