diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-ata | 171 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-block-device | 58 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-scsi_host | 89 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt | 1 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/marvell.txt | 48 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/renesas,ravb.txt | 6 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/usb/dwc2.txt | 2 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/usb/renesas_usb3.txt | 1 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/usb/renesas_usbhs.txt | 1 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/usb/usb-xhci.txt | 1 | ||||
| -rw-r--r-- | Documentation/isdn/INTERFACE.CAPI | 2 | ||||
| -rw-r--r-- | Documentation/isdn/README | 4 | ||||
| -rw-r--r-- | Documentation/isdn/README.FAQ | 4 | ||||
| -rw-r--r-- | Documentation/isdn/README.gigaset | 16 | ||||
| -rw-r--r-- | Documentation/networking/segmentation-offloads.txt | 18 |
16 files changed, 312 insertions, 114 deletions
diff --git a/Documentation/ABI/testing/sysfs-ata b/Documentation/ABI/testing/sysfs-ata index aa4296498859..9ab0ef1dd1c7 100644 --- a/Documentation/ABI/testing/sysfs-ata +++ b/Documentation/ABI/testing/sysfs-ata @@ -1,110 +1,139 @@ What: /sys/class/ata_... -Date: August 2008 -Contact: Gwendal Grignou<gwendal@google.com> Description: - -Provide a place in sysfs for storing the ATA topology of the system. This allows -retrieving various information about ATA objects. + Provide a place in sysfs for storing the ATA topology of the + system. This allows retrieving various information about ATA + objects. Files under /sys/class/ata_port ------------------------------- - For each port, a directory ataX is created where X is the ata_port_id of - the port. The device parent is the ata host device. +For each port, a directory ataX is created where X is the ata_port_id of the +port. The device parent is the ata host device. -idle_irq (read) - Number of IRQ received by the port while idle [some ata HBA only]. +What: /sys/class/ata_port/ataX/nr_pmp_links +What: /sys/class/ata_port/ataX/idle_irq +Date: May, 2010 +KernelVersion: v2.6.37 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + nr_pmp_links: (RO) If a SATA Port Multiplier (PM) is + connected, the number of links behind it. -nr_pmp_links (read) + idle_irq: (RO) Number of IRQ received by the port while + idle [some ata HBA only]. - If a SATA Port Multiplier (PM) is connected, number of link behind it. + +What: /sys/class/ata_port/ataX/port_no +Date: May, 2013 +KernelVersion: v3.11 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + (RO) Host local port number. While registering host controller, + port numbers are tracked based upon number of ports available on + the controller. This attribute is needed by udev for composing + persistent links in /dev/disk/by-path. Files under /sys/class/ata_link ------------------------------- - Behind each port, there is a ata_link. If there is a SATA PM in the - topology, 15 ata_link objects are created. - - If a link is behind a port, the directory name is linkX, where X is - ata_port_id of the port. - If a link is behind a PM, its name is linkX.Y where X is ata_port_id - of the parent port and Y the PM port. +Behind each port, there is a ata_link. If there is a SATA PM in the topology, 15 +ata_link objects are created. -hw_sata_spd_limit +If a link is behind a port, the directory name is linkX, where X is ata_port_id +of the port. If a link is behind a PM, its name is linkX.Y where X is +ata_port_id of the parent port and Y the PM port. - Maximum speed supported by the connected SATA device. -sata_spd_limit +What: /sys/class/ata_link/linkX[.Y]/hw_sata_spd_limit +What: /sys/class/ata_link/linkX[.Y]/sata_spd_limit +What: /sys/class/ata_link/linkX[.Y]/sata_spd +Date: May, 2010 +KernelVersion: v2.6.37 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + hw_sata_spd_limit: (RO) Maximum speed supported by the + connected SATA device. - Maximum speed imposed by libata. + sata_spd_limit: (RO) Maximum speed imposed by libata. -sata_spd + sata_spd: (RO) Current speed of the link + eg. 1.5, 3 Gbps etc. - Current speed of the link [1.5, 3Gps,...]. Files under /sys/class/ata_device --------------------------------- - Behind each link, up to two ata device are created. - The name of the directory is devX[.Y].Z where: - - X is ata_port_id of the port where the device is connected, - - Y the port of the PM if any, and - - Z the device id: for PATA, there is usually 2 devices [0,1], - only 1 for SATA. - -class - Device class. Can be "ata" for disk, "atapi" for packet device, - "pmp" for PM, or "none" if no device was found behind the link. - -dma_mode +Behind each link, up to two ata devices are created. +The name of the directory is devX[.Y].Z where: +- X is ata_port_id of the port where the device is connected, +- Y the port of the PM if any, and +- Z the device id: for PATA, there is usually 2 devices [0,1], only 1 for SATA. + + +What: /sys/class/ata_device/devX[.Y].Z/spdn_cnt +What: /sys/class/ata_device/devX[.Y].Z/gscr +What: /sys/class/ata_device/devX[.Y].Z/ering +What: /sys/class/ata_device/devX[.Y].Z/id +What: /sys/class/ata_device/devX[.Y].Z/pio_mode +What: /sys/class/ata_device/devX[.Y].Z/xfer_mode +What: /sys/class/ata_device/devX[.Y].Z/dma_mode +What: /sys/class/ata_device/devX[.Y].Z/class +Date: May, 2010 +KernelVersion: v2.6.37 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + spdn_cnt: (RO) Number of times libata decided to lower the + speed of link due to errors. - Transfer modes supported by the device when in DMA mode. - Mostly used by PATA device. + gscr: (RO) Cached result of the dump of PM GSCR + register. Valid registers are: -pio_mode + 0: SATA_PMP_GSCR_PROD_ID, + 1: SATA_PMP_GSCR_REV, + 2: SATA_PMP_GSCR_PORT_INFO, + 32: SATA_PMP_GSCR_ERROR, + 33: SATA_PMP_GSCR_ERROR_EN, + 64: SATA_PMP_GSCR_FEAT, + 96: SATA_PMP_GSCR_FEAT_EN, + 130: SATA_PMP_GSCR_SII_GPIO - Transfer modes supported by the device when in PIO mode. - Mostly used by PATA device. + Only valid if the device is a PM. -xfer_mode + ering: (RO) Formatted output of the error ring of the + device. - Current transfer mode. + id: (RO) Cached result of IDENTIFY command, as + described in ATA8 7.16 and 7.17. Only valid if + the device is not a PM. -id + pio_mode: (RO) Transfer modes supported by the device when + in PIO mode. Mostly used by PATA device. - Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17. - Only valid if the device is not a PM. + xfer_mode: (RO) Current transfer mode -gscr + dma_mode: (RO) Transfer modes supported by the device when + in DMA mode. Mostly used by PATA device. - Cached result of the dump of PM GSCR register. - Valid registers are: - 0: SATA_PMP_GSCR_PROD_ID, - 1: SATA_PMP_GSCR_REV, - 2: SATA_PMP_GSCR_PORT_INFO, - 32: SATA_PMP_GSCR_ERROR, - 33: SATA_PMP_GSCR_ERROR_EN, - 64: SATA_PMP_GSCR_FEAT, - 96: SATA_PMP_GSCR_FEAT_EN, - 130: SATA_PMP_GSCR_SII_GPIO - Only valid if the device is a PM. + class: (RO) Device class. Can be "ata" for disk, + "atapi" for packet device, "pmp" for PM, or + "none" if no device was found behind the link. -trim - Shows the DSM TRIM mode currently used by the device. Valid - values are: - unsupported: Drive does not support DSM TRIM - unqueued: Drive supports unqueued DSM TRIM only - queued: Drive supports queued DSM TRIM - forced_unqueued: Drive's queued DSM support is known to be - buggy and only unqueued TRIM commands - are sent +What: /sys/class/ata_device/devX[.Y].Z/trim +Date: May, 2015 +KernelVersion: v4.10 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + (RO) Shows the DSM TRIM mode currently used by the device. Valid + values are: -spdn_cnt + unsupported: Drive does not support DSM TRIM - Number of time libata decided to lower the speed of link due to errors. + unqueued: Drive supports unqueued DSM TRIM only -ering + queued: Drive supports queued DSM TRIM - Formatted output of the error ring of the device. + forced_unqueued: Drive's queued DSM support is known to + be buggy and only unqueued TRIM commands + are sent diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device new file mode 100644 index 000000000000..82ef6eab042d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-block-device @@ -0,0 +1,58 @@ +What: /sys/block/*/device/sw_activity +Date: Jun, 2008 +KernelVersion: v2.6.27 +Contact: linux-ide@vger.kernel.org +Description: + (RW) Used by drivers which support software controlled activity + LEDs. + + It has the following valid values: + + 0 OFF - the LED is not activated on activity + 1 BLINK_ON - the LED blinks on every 10ms when activity is + detected. + 2 BLINK_OFF - the LED is on when idle, and blinks off + every 10ms when activity is detected. + + Note that the user must turn sw_activity OFF it they wish to + control the activity LED via the em_message file. + + +What: /sys/block/*/device/unload_heads +Date: Sep, 2008 +KernelVersion: v2.6.28 +Contact: linux-ide@vger.kernel.org +Description: + (RW) Hard disk shock protection + + Writing an integer value to this file will take the heads of the + respective drive off the platter and block all I/O operations + for the specified number of milliseconds. + + - If the device does not support the unload heads feature, + access is denied with -EOPNOTSUPP. + - The maximal value accepted for a timeout is 30000 + milliseconds. + - A previously set timeout can be cancelled and disk can resume + normal operation immediately by specifying a timeout of 0. + - Some hard drives only comply with an earlier version of the + ATA standard, but support the unload feature nonetheless. + There is no safe way Linux can detect these devices, so this + is not enabled by default. If it is known that your device + does support the unload feature, then you can tell the kernel + to enable it by writing -1. It can be disabled again by + writing -2. + - Values below -2 are rejected with -EINVAL + + For more information, see + Documentation/laptops/disk-shock-protection.txt + + +What: /sys/block/*/device/ncq_prio_enable +Date: Oct, 2016 +KernelVersion: v4.10 +Contact: linux-ide@vger.kernel.org +Description: + (RW) Write to the file to turn on or off the SATA ncq (native + command queueing) support. By default this feature is turned + off. diff --git a/Documentation/ABI/testing/sysfs-class-scsi_host b/Documentation/ABI/testing/sysfs-class-scsi_host index 0eb255e7db12..bafc59fd7b69 100644 --- a/Documentation/ABI/testing/sysfs-class-scsi_host +++ b/Documentation/ABI/testing/sysfs-class-scsi_host @@ -27,3 +27,92 @@ Description: This file contains the current status of the "SSD Smart Path" the direct i/o path to physical devices. This setting is controller wide, affecting all configured logical drives on the controller. This file is readable and writable. + +What: /sys/class/scsi_host/hostX/link_power_management_policy +Date: Oct, 2007 +KernelVersion: v2.6.24 +Contact: linux-ide@vger.kernel.org +Description: + (RW) This parameter allows the user to read and set the link + (interface) power management. + + There are four possible options: + + min_power: Tell the controller to try to make the link use the + least possible power when possible. This may sacrifice some + performance due to increased latency when coming out of lower + power states. + + max_performance: Generally, this means no power management. + Tell the controller to have performance be a priority over power + management. + + medium_power: Tell the controller to enter a lower power state + when possible, but do not enter the lowest power state, thus + improving latency over min_power setting. + + med_power_with_dipm: Identical to the existing medium_power + setting except that it enables dipm (device initiated power + management) on top, which makes it match the Windows IRST (Intel + Rapid Storage Technology) driver settings. This setting is also + close to min_power, except that: + a) It does not use host-initiated slumber mode, but it does + allow device-initiated slumber + b) It does not enable low power device sleep mode (DevSlp). + +What: /sys/class/scsi_host/hostX/em_message +What: /sys/class/scsi_host/hostX/em_message_type +Date: Jun, 2008 +KernelVersion: v2.6.27 +Contact: linux-ide@vger.kernel.org +Description: + em_message: (RW) Enclosure management support. For the LED + protocol, writes and reads correspond to the LED message format + as defined in the AHCI spec. + + The user must turn sw_activity (under /sys/block/*/device/) OFF + it they wish to control the activity LED via the em_message + file. + + em_message_type: (RO) Displays the current enclosure management + protocol that is being used by the driver (for eg. LED, SAF-TE, + SES-2, SGPIO etc). + +What: /sys/class/scsi_host/hostX/ahci_port_cmd +What: /sys/class/scsi_host/hostX/ahci_host_caps +What: /sys/class/scsi_host/hostX/ahci_host_cap2 +Date: Mar, 2010 +KernelVersion: v2.6.35 +Contact: linux-ide@vger.kernel.org +Description: + [to be documented] + +What: /sys/class/scsi_host/hostX/ahci_host_version +Date: Mar, 2010 +KernelVersion: v2.6.35 +Contact: linux-ide@vger.kernel.org +Description: + (RO) Display the version of the AHCI spec implemented by the + host. + +What: /sys/class/scsi_host/hostX/em_buffer +Date: Apr, 2010 +KernelVersion: v2.6.35 +Contact: linux-ide@vger.kernel.org +Description: + (RW) Allows access to AHCI EM (enclosure management) buffer + directly if the host supports EM. + + For eg. the AHCI driver supports SGPIO EM messages but the + SATA/AHCI specs do not define the SGPIO message format of the EM + buffer. Different hardware(HW) vendors may have different + definitions. With the em_buffer attribute, this issue can be + solved by allowing HW vendors to provide userland drivers and + tools for their SGPIO initiators. + +What: /sys/class/scsi_host/hostX/em_message_supported +Date: Oct, 2009 +KernelVersion: v2.6.39 +Contact: linux-ide@vger.kernel.org +Description: + (RO) Displays supported enclosure management message types. diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt index 6394ea9e3b9e..58b12e25bbb1 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt @@ -16,6 +16,7 @@ Required properties: - ddc: phandle to the hdmi ddc node - phy: phandle to the hdmi phy node - samsung,syscon-phandle: phandle for system controller node for PMU. +- #sound-dai-cells: should be 0. Required properties for Exynos 4210, 4212, 5420 and 5433: - clocks: list of clock IDs from SoC clock driver. diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt index e9ebb8a20e0d..ba24ca7ba95e 100644 --- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt @@ -3,11 +3,11 @@ Device-Tree bindings for sigma delta modulator Required properties: - compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use as a generic SD modulator if modulator not specified in compatible list. -- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers". +- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers". Example node: ads1202: adc@0 { compatible = "sd-modulator"; - #io-channel-cells = <1>; + #io-channel-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index 1d4d0f49c9d0..8c033d48e2ba 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -50,14 +50,15 @@ Example: compatible = "marvell,mv88e6085"; reg = <0>; reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; }; @@ -74,23 +75,24 @@ Example: compatible = "marvell,mv88e6390"; reg = <0>; reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; }; - }; - mdio1 { - compatible = "marvell,mv88e6xxx-mdio-external"; - #address-cells = <1>; - #size-cells = <0>; - switch1phy9: switch1phy0@9 { - reg = <9>; + mdio1 { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + switch1phy9: switch1phy0@9 { + reg = <9>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 92fd4b2f17b2..b4dc455eb155 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -27,7 +27,11 @@ Required properties: SoC-specific version corresponding to the platform first followed by the generic version. -- reg: offset and length of (1) the register block and (2) the stream buffer. +- reg: Offset and length of (1) the register block and (2) the stream buffer. + The region for the register block is mandatory. + The region for the stream buffer is optional, as it is only present on + R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A7796), + and M3-N (R8A77965). - interrupts: A list of interrupt-specifiers, one for each entry in interrupt-names. If interrupt-names is not present, an interrupt specifier diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index e64d903bcbe8..46da5f184460 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -19,7 +19,7 @@ Required properties: configured in FS mode; - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs configured in HS mode; - - "st,stm32f7xx-hsotg": The DWC2 USB HS controller instance in STM32F7xx SoCs + - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs configured in HS mode; - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt index 87a45e2f9b7f..2c071bb5801e 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt @@ -4,6 +4,7 @@ Required properties: - compatible: Must contain one of the following: - "renesas,r8a7795-usb3-peri" - "renesas,r8a7796-usb3-peri" + - "renesas,r8a77965-usb3-peri" - "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible device diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index d060172f1529..43960faf5a88 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -12,6 +12,7 @@ Required properties: - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device - "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device + - "renesas,usbhs-r8a77965" for r8a77965 (R-Car M3-N) compatible device - "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device - "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device - "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index e2ea59bbca93..1651483a7048 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -13,6 +13,7 @@ Required properties: - "renesas,xhci-r8a7793" for r8a7793 SoC - "renesas,xhci-r8a7795" for r8a7795 SoC - "renesas,xhci-r8a7796" for r8a7796 SoC + - "renesas,xhci-r8a77965" for r8a77965 SoC - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible device - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI index 1688b5a1fd77..021aa9cf139d 100644 --- a/Documentation/isdn/INTERFACE.CAPI +++ b/Documentation/isdn/INTERFACE.CAPI @@ -18,7 +18,7 @@ corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both directions between the application and the hardware driver. Format and semantics of CAPI messages are specified in the CAPI 2.0 standard. -This standard is freely available from http://www.capi.org. +This standard is freely available from https://www.capi.org. 2. Driver and Device Registration diff --git a/Documentation/isdn/README b/Documentation/isdn/README index 32d4e80c2c03..74bd2bdb455b 100644 --- a/Documentation/isdn/README +++ b/Documentation/isdn/README @@ -33,10 +33,10 @@ README for the ISDN-subsystem de.alt.comm.isdn4linux There is also a well maintained FAQ in English available at - http://www.mhessler.de/i4lfaq/ + https://www.mhessler.de/i4lfaq/ It can be viewed online, or downloaded in sgml/text/html format. The FAQ can also be viewed online at - http://www.isdn4linux.de/faq/ + https://www.isdn4linux.de/faq/i4lfaq.html or downloaded from ftp://ftp.isdn4linux.de/pub/isdn4linux/FAQ/ diff --git a/Documentation/isdn/README.FAQ b/Documentation/isdn/README.FAQ index 356f7944641d..e5dd1addacdd 100644 --- a/Documentation/isdn/README.FAQ +++ b/Documentation/isdn/README.FAQ @@ -8,9 +8,9 @@ You find it in: In case you just want to see the FAQ online, or download the newest version, you can have a look at my website: -http://www.mhessler.de/i4lfaq/ (view + download) +https://www.mhessler.de/i4lfaq/ (view + download) or: -http://www.isdn4linux.de/faq/ (view) +https://www.isdn4linux.de/faq/4lfaq.html (view) As the extension tells, the FAQ is in SGML format, and you can convert it into text/html/... format by using the sgml2txt/sgml2html/... tools. diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset index 7534c6039adc..9b1ce277ca3d 100644 --- a/Documentation/isdn/README.gigaset +++ b/Documentation/isdn/README.gigaset @@ -29,8 +29,9 @@ GigaSet 307x Device Driver T-Com Sinus 721 data Chicago 390 USB (KPN) - See also http://www.erbze.info/sinus_gigaset.htm and - http://gigaset307x.sourceforge.net/ + See also http://www.erbze.info/sinus_gigaset.htm + (archived at https://web.archive.org/web/20100717020421/http://www.erbze.info:80/sinus_gigaset.htm ) and + http://gigaset307x.sourceforge.net/ We had also reports from users of Gigaset M105 who could use the drivers with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.5.) @@ -52,7 +53,7 @@ GigaSet 307x Device Driver to use CAPI 2.0 or ISDN4Linux for ISDN connections (voice or data). There are some user space tools available at - http://sourceforge.net/projects/gigaset307x/ + https://sourceforge.net/projects/gigaset307x/ which provide access to additional device specific functions like SMS, phonebook or call journal. @@ -202,7 +203,7 @@ GigaSet 307x Device Driver You can use some configuration tool of your distribution to configure this "modem" or configure pppd/wvdial manually. There are some example ppp configuration files and chat scripts in the gigaset-VERSION/ppp directory - in the driver packages from http://sourceforge.net/projects/gigaset307x/. + in the driver packages from https://sourceforge.net/projects/gigaset307x/. Please note that the USB drivers are not able to change the state of the control lines. This means you must use "Stupid Mode" if you are using wvdial or you should use the nocrtscts option of pppd. @@ -361,7 +362,7 @@ GigaSet 307x Device Driver --------------------------- If you can't solve problems with the driver on your own, feel free to use one of the forums, bug trackers, or mailing lists on - http://sourceforge.net/projects/gigaset307x + https://sourceforge.net/projects/gigaset307x or write an electronic mail to the maintainers. Try to provide as much information as possible, such as @@ -391,11 +392,12 @@ GigaSet 307x Device Driver 4. Links, other software --------------------- - Sourceforge project developing this driver and associated tools - http://sourceforge.net/projects/gigaset307x + https://sourceforge.net/projects/gigaset307x - Yahoo! Group on the Siemens Gigaset family of devices - http://de.groups.yahoo.com/group/Siemens-Gigaset + https://de.groups.yahoo.com/group/Siemens-Gigaset - Siemens Gigaset/T-Sinus compatibility table http://www.erbze.info/sinus_gigaset.htm + (archived at https://web.archive.org/web/20100717020421/http://www.erbze.info:80/sinus_gigaset.htm ) 5. Credits diff --git a/Documentation/networking/segmentation-offloads.txt b/Documentation/networking/segmentation-offloads.txt index d47480b61ac6..aca542ec125c 100644 --- a/Documentation/networking/segmentation-offloads.txt +++ b/Documentation/networking/segmentation-offloads.txt @@ -20,8 +20,8 @@ TCP Segmentation Offload TCP segmentation allows a device to segment a single frame into multiple frames with a data payload size specified in skb_shinfo()->gso_size. -When TCP segmentation requested the bit for either SKB_GSO_TCP or -SKB_GSO_TCP6 should be set in skb_shinfo()->gso_type and +When TCP segmentation requested the bit for either SKB_GSO_TCPV4 or +SKB_GSO_TCPV6 should be set in skb_shinfo()->gso_type and skb_shinfo()->gso_size should be set to a non-zero value. TCP segmentation is dependent on support for the use of partial checksum @@ -153,8 +153,18 @@ To signal this, gso_size is set to the special value GSO_BY_FRAGS. Therefore, any code in the core networking stack must be aware of the possibility that gso_size will be GSO_BY_FRAGS and handle that case -appropriately. (For size checks, the skb_gso_validate_*_len family of -helpers do this automatically.) +appropriately. + +There are some helpers to make this easier: + + - skb_is_gso(skb) && skb_is_gso_sctp(skb) is the best way to see if + an skb is an SCTP GSO skb. + + - For size checks, the skb_gso_validate_*_len family of helpers correctly + considers GSO_BY_FRAGS. + + - For manipulating packets, skb_increase_gso_size and skb_decrease_gso_size + will check for GSO_BY_FRAGS and WARN if asked to manipulate these skbs. This also affects drivers with the NETIF_F_FRAGLIST & NETIF_F_GSO_SCTP bits set. Note also that NETIF_F_GSO_SCTP is included in NETIF_F_GSO_SOFTWARE. |