diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/ABI/testing/debugfs-pfo-nx-crypto | 45 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-devices-power | 35 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-power | 59 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt | 49 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt | 17 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/mxs-saif.txt | 36 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt | 32 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt | 15 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt | 14 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt | 54 | ||||
| -rw-r--r-- | Documentation/hwmon/ina2xx | 29 | ||||
| -rw-r--r-- | Documentation/hwmon/it87 | 28 | ||||
| -rw-r--r-- | Documentation/kernel-parameters.txt | 2 | ||||
| -rw-r--r-- | Documentation/power/suspend-and-cpuhotplug.txt | 2 | ||||
| -rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 2 |
15 files changed, 401 insertions, 18 deletions
diff --git a/Documentation/ABI/testing/debugfs-pfo-nx-crypto b/Documentation/ABI/testing/debugfs-pfo-nx-crypto new file mode 100644 index 000000000000..685d5a448423 --- /dev/null +++ b/Documentation/ABI/testing/debugfs-pfo-nx-crypto @@ -0,0 +1,45 @@ +What: /sys/kernel/debug/nx-crypto/* +Date: March 2012 +KernelVersion: 3.4 +Contact: Kent Yoder <key@linux.vnet.ibm.com> +Description: + + These debugfs interfaces are built by the nx-crypto driver, built in +arch/powerpc/crypto/nx. + +Error Detection +=============== + +errors: +- A u32 providing a total count of errors since the driver was loaded. The +only errors counted here are those returned from the hcall, H_COP_OP. + +last_error: +- The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not +recorded here (the hcall will retry until -EBUSY goes away). + +last_error_pid: +- The process ID of the process who received the most recent error from the +hcall. + +Device Use +========== + +aes_bytes: +- The total number of bytes encrypted using AES in any of the driver's +supported modes. + +aes_ops: +- The total number of AES operations submitted to the hardware. + +sha256_bytes: +- The total number of bytes hashed by the hardware using SHA-256. + +sha256_ops: +- The total number of SHA-256 operations submitted to the hardware. + +sha512_bytes: +- The total number of bytes hashed by the hardware using SHA-512. + +sha512_ops: +- The total number of SHA-512 operations submitted to the hardware. diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power index 840f7d64d483..45000f0db4d4 100644 --- a/Documentation/ABI/testing/sysfs-devices-power +++ b/Documentation/ABI/testing/sysfs-devices-power @@ -96,16 +96,26 @@ Description: is read-only. If the device is not enabled to wake up the system from sleep states, this attribute is not present. -What: /sys/devices/.../power/wakeup_hit_count -Date: September 2010 +What: /sys/devices/.../power/wakeup_abort_count +Date: February 2012 Contact: Rafael J. Wysocki <rjw@sisk.pl> Description: - The /sys/devices/.../wakeup_hit_count attribute contains the + The /sys/devices/.../wakeup_abort_count attribute contains the number of times the processing of a wakeup event associated with - the device might prevent the system from entering a sleep state. - This attribute is read-only. If the device is not enabled to - wake up the system from sleep states, this attribute is not - present. + the device might have aborted system transition into a sleep + state in progress. This attribute is read-only. If the device + is not enabled to wake up the system from sleep states, this + attribute is not present. + +What: /sys/devices/.../power/wakeup_expire_count +Date: February 2012 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/devices/.../wakeup_expire_count attribute contains the + number of times a wakeup event associated with the device has + been reported with a timeout that expired. This attribute is + read-only. If the device is not enabled to wake up the system + from sleep states, this attribute is not present. What: /sys/devices/.../power/wakeup_active Date: September 2010 @@ -148,6 +158,17 @@ Description: not enabled to wake up the system from sleep states, this attribute is not present. +What: /sys/devices/.../power/wakeup_prevent_sleep_time_ms +Date: February 2012 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute + contains the total time the device has been preventing + opportunistic transitions to sleep states from occuring. + This attribute is read-only. If the device is not enabled to + wake up the system from sleep states, this attribute is not + present. + What: /sys/devices/.../power/autosuspend_delay_ms Date: September 2010 Contact: Alan Stern <stern@rowland.harvard.edu> diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index b464d12761ba..31725ffeeb3a 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -172,3 +172,62 @@ Description: Reading from this file will display the current value, which is set to 1 MB by default. + +What: /sys/power/autosleep +Date: April 2012 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/power/autosleep file can be written one of the strings + returned by reads from /sys/power/state. If that happens, a + work item attempting to trigger a transition of the system to + the sleep state represented by that string is queued up. This + attempt will only succeed if there are no active wakeup sources + in the system at that time. After every execution, regardless + of whether or not the attempt to put the system to sleep has + succeeded, the work item requeues itself until user space + writes "off" to /sys/power/autosleep. + + Reading from this file causes the last string successfully + written to it to be returned. + +What: /sys/power/wake_lock +Date: February 2012 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/power/wake_lock file allows user space to create + wakeup source objects and activate them on demand (if one of + those wakeup sources is active, reads from the + /sys/power/wakeup_count file block or return false). When a + string without white space is written to /sys/power/wake_lock, + it will be assumed to represent a wakeup source name. If there + is a wakeup source object with that name, it will be activated + (unless active already). Otherwise, a new wakeup source object + will be registered, assigned the given name and activated. + If a string written to /sys/power/wake_lock contains white + space, the part of the string preceding the white space will be + regarded as a wakeup source name and handled as descrived above. + The other part of the string will be regarded as a timeout (in + nanoseconds) such that the wakeup source will be automatically + deactivated after it has expired. The timeout, if present, is + set regardless of the current state of the wakeup source object + in question. + + Reads from this file return a string consisting of the names of + wakeup sources created with the help of it that are active at + the moment, separated with spaces. + + +What: /sys/power/wake_unlock +Date: February 2012 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/power/wake_unlock file allows user space to deactivate + wakeup sources created with the help of /sys/power/wake_lock. + When a string is written to /sys/power/wake_unlock, it will be + assumed to represent the name of a wakeup source to deactivate. + If a wakeup source object of that name exists and is active at + the moment, it will be deactivated. + + Reads from this file return a string consisting of the names of + wakeup sources created with the help of /sys/power/wake_lock + that are inactive at the moment, separated with spaces. diff --git a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt new file mode 100644 index 000000000000..e4acdd891e49 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt @@ -0,0 +1,49 @@ +Freescale i.MX audio complex with SGTL5000 codec + +Required properties: +- compatible : "fsl,imx-audio-sgtl5000" +- model : The user-visible name of this sound complex +- ssi-controller : The phandle of the i.MX SSI controller +- audio-codec : The phandle of the SGTL5000 audio codec +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names could be power + supplies, SGTL5000 pins, and the jacks on the board: + + Power supplies: + * Mic Bias + + SGTL5000 pins: + * MIC_IN + * LINE_IN + * HP_OUT + * LINE_OUT + + Board connectors: + * Mic Jack + * Line In Jack + * Headphone Jack + * Line Out Jack + * Ext Spk + +- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) +- mux-ext-port : The external port of the i.MX audio muxer + +Note: The AUDMUX port numbering should start at 1, which is consistent with +hardware manual. + +Example: + +sound { + compatible = "fsl,imx51-babbage-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx51-babbage-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; +}; diff --git a/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt new file mode 100644 index 000000000000..601c518eddaa --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt @@ -0,0 +1,17 @@ +* Freescale MXS audio complex with SGTL5000 codec + +Required properties: +- compatible: "fsl,mxs-audio-sgtl5000" +- model: The user-visible name of this sound complex +- saif-controllers: The phandle list of the MXS SAIF controller +- audio-codec: The phandle of the SGTL5000 audio codec + +Example: + +sound { + compatible = "fsl,imx28-evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; +}; diff --git a/Documentation/devicetree/bindings/sound/mxs-saif.txt b/Documentation/devicetree/bindings/sound/mxs-saif.txt new file mode 100644 index 000000000000..c37ba6143d9b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mxs-saif.txt @@ -0,0 +1,36 @@ +* Freescale MXS Serial Audio Interface (SAIF) + +Required properties: +- compatible: Should be "fsl,<chip>-saif" +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts +- fsl,saif-dma-channel: APBX DMA channel for the SAIF + +Optional properties: +- fsl,saif-master: phandle to the master SAIF. It's only required for + the slave SAIF. + +Note: Each SAIF controller should have an alias correctly numbered +in "aliases" node. + +Example: + +aliases { + saif0 = &saif0; + saif1 = &saif1; +}; + +saif0: saif@80042000 { + compatible = "fsl,imx28-saif"; + reg = <0x80042000 2000>; + interrupts = <59 80>; + fsl,saif-dma-channel = <4>; +}; + +saif1: saif@80046000 { + compatible = "fsl,imx28-saif"; + reg = <0x80046000 2000>; + interrupts = <58 81>; + fsl,saif-dma-channel = <5>; + fsl,saif-master = <&saif0>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt new file mode 100644 index 000000000000..1ac7b1642186 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt @@ -0,0 +1,32 @@ +NVIDIA Tegra30 AHUB (Audio Hub) + +Required properties: +- compatible : "nvidia,tegra30-ahub" +- reg : Should contain the register physical address and length for each of + the AHUB's APBIF registers and the AHUB's own registers. +- interrupts : Should contain AHUB interrupt +- nvidia,dma-request-selector : The Tegra DMA controller's phandle and + request selector for the first APBIF channel. +- ranges : The bus address mapping for the configlink register bus. + Can be empty since the mapping is 1:1. +- #address-cells : For the configlink bus. Should be <1>; +- #size-cells : For the configlink bus. Should be <1>. + +AHUB client modules need to specify the IDs of their CIFs (Client InterFaces). +For RX CIFs, the numbers indicate the register number within AHUB routing +register space (APBIF 0..3 RX, I2S 0..5 RX, DAM 0..2 RX 0..1, SPDIF RX 0..1). +For TX CIFs, the numbers indicate the bit position within the AHUB routing +registers (APBIF 0..3 TX, I2S 0..5 TX, DAM 0..2 TX, SPDIF TX 0..1). + +Example: + +ahub@70080000 { + compatible = "nvidia,tegra30-ahub"; + reg = <0x70080000 0x200 0x70080200 0x100>; + interrupts = < 0 103 0x04 >; + nvidia,dma-request-selector = <&apbdma 1>; + + ranges; + #address-cells = <1>; + #size-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt new file mode 100644 index 000000000000..dfa6c037124a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt @@ -0,0 +1,15 @@ +NVIDIA Tegra30 I2S controller + +Required properties: +- compatible : "nvidia,tegra30-i2s" +- reg : Should contain I2S registers location and length +- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback) + first, tx (capture) second. See nvidia,tegra30-ahub.txt for values. + +Example: + +i2s@70002800 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080300 0x100>; + nvidia,ahub-cif-ids = <4 4>; +}; diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt b/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt new file mode 100644 index 000000000000..04b14cfb1f16 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt @@ -0,0 +1,14 @@ +NVIDIA Tegra audio complex for TrimSlice + +Required properties: +- compatible : "nvidia,tegra-audio-trimslice" +- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller +- nvidia,audio-codec : The phandle of the WM8903 audio codec + +Example: + +sound { + compatible = "nvidia,tegra-audio-trimslice"; + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&codec>; +}; diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt new file mode 100644 index 000000000000..c4dd39ce6165 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt @@ -0,0 +1,54 @@ +NVIDIA Tegra audio complex + +Required properties: +- compatible : "nvidia,tegra-audio-wm8753" +- nvidia,model : The user-visible name of this sound complex. +- nvidia,audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources and + sinks are the WM8753's pins, and the jacks on the board: + + WM8753 pins: + + * LOUT1 + * LOUT2 + * ROUT1 + * ROUT2 + * MONO1 + * MONO2 + * OUT3 + * OUT4 + * LINE1 + * LINE2 + * RXP + * RXN + * ACIN + * ACOP + * MIC1N + * MIC1 + * MIC2N + * MIC2 + * Mic Bias + + Board connectors: + + * Headphone Jack + * Mic Jack + +- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller +- nvidia,audio-codec : The phandle of the WM8753 audio codec +Example: + +sound { + compatible = "nvidia,tegra-audio-wm8753-whistler", + "nvidia,tegra-audio-wm8753" + nvidia,model = "tegra-wm8753-harmony"; + + nvidia,audio-routing = + "Headphone Jack", "LOUT1", + "Headphone Jack", "ROUT1"; + + nvidia,i2s-controller = <&i2s1>; + nvidia,audio-codec = <&wm8753>; +}; + diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx new file mode 100644 index 000000000000..f50a6cc27616 --- /dev/null +++ b/Documentation/hwmon/ina2xx @@ -0,0 +1,29 @@ +Kernel driver ina2xx +==================== + +Supported chips: + * Texas Instruments INA219 + Prefix: 'ina219' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website + http://www.ti.com/ + + * Texas Instruments INA226 + Prefix: 'ina226' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website + http://www.ti.com/ + +Author: Lothar Felten <l-felten@ti.com> + +Description +----------- + +The INA219 is a high-side current shunt and power monitor with an I2C +interface. The INA219 monitors both shunt drop and supply voltage, with +programmable conversion times and filtering. + +The INA226 is a current shunt and power monitor with an I2C interface. +The INA226 monitors both a shunt voltage drop and bus supply voltage. + +The shunt value in micro-ohms can be set via platform data. diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index fba745571684..87850d86c559 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -30,6 +30,14 @@ Supported chips: Prefix: 'it8728' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Not publicly available + * IT8782F + Prefix: 'it8782' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8783E/F + Prefix: 'it8783' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available * SiS950 [clone of IT8705F] Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -75,7 +83,8 @@ Description ----------- This driver implements support for the IT8705F, IT8712F, IT8716F, -IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E and SiS950 chips. +IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8781F, IT8782F, +IT8783E/F, and SiS950 chips. These chips are 'Super I/O chips', supporting floppy disks, infrared ports, joysticks and other miscellaneous stuff. For hardware monitoring, they @@ -99,11 +108,11 @@ The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions have support for 2 additional fans. The additional fans are supported by the driver. -The IT8716F, IT8718F, IT8720F and IT8721F/IT8758E, and late IT8712F and -IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This -is better (no more fan clock divider mess) but not compatible with the older -chips and revisions. The 16-bit tachometer mode is enabled by the driver when -one of the above chips is detected. +The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8782F, IT8783E/F, and late +IT8712F and IT8705F also have optional 16-bit tachometer counters for fans 1 to +3. This is better (no more fan clock divider mess) but not compatible with the +older chips and revisions. The 16-bit tachometer mode is enabled by the driver +when one of the above chips is detected. The IT8726F is just bit enhanced IT8716F with additional hardware for AMD power sequencing. Therefore the chip will appear as IT8716F @@ -131,9 +140,10 @@ inputs can measure voltages between 0 and 4.08 volts, with a resolution of 0.016 volt (except IT8721F/IT8758E and IT8728F: 0.012 volt.) The battery voltage in8 does not have limit registers. -On the IT8721F/IT8758E, some voltage inputs are internal and scaled inside -the chip (in7, in8 and optionally in3). The driver handles this transparently -so user-space doesn't have to care. +On the IT8721F/IT8758E, IT8782F, and IT8783E/F, some voltage inputs are +internal and scaled inside the chip (in7 (optional for IT8782F and IT8783E/F), +in8 and optionally in3). The driver handles this transparently so user-space +doesn't have to care. The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value: the voltage level your processor should work with. This is hardcoded by diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 62aba89b04a2..8cb10f77c723 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2463,6 +2463,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. resume= [SWSUSP] Specify the partition device for software suspend + Format: + {/dev/<dev> | PARTUUID=<uuid> | <int>:<int> | <hex>} resume_offset= [SWSUSP] Specify the offset from the beginning of the partition diff --git a/Documentation/power/suspend-and-cpuhotplug.txt b/Documentation/power/suspend-and-cpuhotplug.txt index f28f9a6f0347..e13dafc8e8f1 100644 --- a/Documentation/power/suspend-and-cpuhotplug.txt +++ b/Documentation/power/suspend-and-cpuhotplug.txt @@ -29,7 +29,7 @@ More details follow: Write 'mem' to /sys/power/state - syfs file + sysfs file | v Acquire pm_mutex lock diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 8c16d50f6cb6..221b81016dba 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1545,7 +1545,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for sound cards based on the C-Media CMI8786/8787/8788 chip: * Asound A-8788 - * Asus Xonar DG + * Asus Xonar DG/DGX * AuzenTech X-Meridian * AuzenTech X-Meridian 2G * Bgears b-Enspirer |