summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/pci/83xx-512x-pci.txt6
-rw-r--r--Documentation/devicetree/bindings/pci/altera-pcie.txt18
-rw-r--r--Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt2
-rw-r--r--Documentation/devicetree/bindings/pci/designware-pcie.txt24
-rw-r--r--Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt2
-rw-r--r--Documentation/devicetree/bindings/pci/hisilicon-pcie.txt4
-rw-r--r--Documentation/devicetree/bindings/pci/kirin-pcie.txt8
-rw-r--r--Documentation/devicetree/bindings/pci/layerscape-pci.txt4
-rw-r--r--Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt130
-rw-r--r--Documentation/devicetree/bindings/pci/mediatek-pcie.txt284
-rw-r--r--Documentation/devicetree/bindings/pci/mvebu-pci.txt2
-rw-r--r--Documentation/devicetree/bindings/pci/pci-armada8k.txt2
-rw-r--r--Documentation/devicetree/bindings/pci/pci-keystone.txt15
-rw-r--r--Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt7
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie.txt27
-rw-r--r--Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt2
-rw-r--r--Documentation/devicetree/bindings/pci/rcar-pci.txt7
-rw-r--r--Documentation/devicetree/bindings/pci/rockchip-pcie.txt28
-rw-r--r--Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt22
-rw-r--r--Documentation/devicetree/bindings/pci/spear13xx-pcie.txt6
-rw-r--r--Documentation/devicetree/bindings/pci/ti-pci.txt8
-rw-r--r--Documentation/devicetree/bindings/pci/versatile.txt2
-rw-r--r--Documentation/devicetree/bindings/pci/xgene-pci-msi.txt5
-rw-r--r--Documentation/devicetree/bindings/pci/xgene-pci.txt8
-rw-r--r--Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt7
-rw-r--r--Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt7
26 files changed, 422 insertions, 215 deletions
diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
index 35a465362408..b9165b72473c 100644
--- a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
+++ b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
@@ -1,11 +1,11 @@
* Freescale 83xx and 512x PCI bridges
-Freescale 83xx and 512x SOCs include the same pci bridge core.
+Freescale 83xx and 512x SOCs include the same PCI bridge core.
83xx/512x specific notes:
- reg: should contain two address length tuples
- The first is for the internal pci bridge registers
- The second is for the pci config space access registers
+ The first is for the internal PCI bridge registers
+ The second is for the PCI config space access registers
Example (MPC8313ERDB)
pci0: pci@e0008500 {
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt
index 2951a6a50704..495880193adc 100644
--- a/Documentation/devicetree/bindings/pci/altera-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -7,21 +7,21 @@ Required properties:
"Txs": TX slave port region
"Cra": Control register access region
- interrupt-parent: interrupt source phandle.
-- interrupts: specifies the interrupt source of the parent interrupt controller.
- The format of the interrupt specifier depends on the parent interrupt
- controller.
+- interrupts: specifies the interrupt source of the parent interrupt
+ controller. The format of the interrupt specifier depends
+ on the parent interrupt controller.
- device_type: must be "pci"
- #address-cells: set to <3>
-- #size-cells: set to <2>
+- #size-cells: set to <2>
- #interrupt-cells: set to <1>
-- ranges: describes the translation of addresses for root ports and standard
- PCI regions.
+- ranges: describes the translation of addresses for root ports and
+ standard PCI regions.
- interrupt-map-mask and interrupt-map: standard PCI properties to define the
mapping of the PCIe interface to interrupt numbers.
Optional properties:
-- msi-parent: Link to the hardware entity that serves as the MSI controller for this PCIe
- controller.
+- msi-parent: Link to the hardware entity that serves as the MSI controller
+ for this PCIe controller.
- bus-range: PCI bus numbers covered
Example
@@ -45,5 +45,5 @@ Example
<0 0 0 3 &pcie_0 3>,
<0 0 0 4 &pcie_0 4>;
ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
- 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
+ 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
};
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
index 5ecaea1e6eee..4e4aee4439ea 100644
--- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -6,7 +6,7 @@ and thus inherits all the common properties defined in designware-pcie.txt.
Required properties:
- compatible: "axis,artpec6-pcie", "snps,dw-pcie"
- reg: base addresses and lengths of the PCIe controller (DBI),
- the phy controller, and configuration address space.
+ the PHY controller, and configuration address space.
- reg-names: Must include the following entries:
- "dbi"
- "phy"
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index b2480dd38c11..1da7ade3183c 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -1,4 +1,4 @@
-* Synopsys Designware PCIe interface
+* Synopsys DesignWare PCIe interface
Required properties:
- compatible: should contain "snps,dw-pcie" to identify the core.
@@ -17,29 +17,27 @@ RC mode:
properties to define the mapping of the PCIe interface to interrupt
numbers.
EP mode:
-- num-ib-windows: number of inbound address translation
- windows
-- num-ob-windows: number of outbound address translation
- windows
+- num-ib-windows: number of inbound address translation windows
+- num-ob-windows: number of outbound address translation windows
Optional properties:
- num-lanes: number of lanes to use (this property should be specified unless
the link is brought already up in BIOS)
-- reset-gpio: gpio pin number of power good signal
+- reset-gpio: GPIO pin number of power good signal
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- "pcie"
- "pcie_bus"
RC mode:
-- num-viewport: number of view ports configured in
- hardware. If a platform does not specify it, the driver assumes 2.
-- bus-range: PCI bus numbers covered (it is recommended
- for new devicetrees to specify this property, to keep backwards
- compatibility a range of 0x00-0xff is assumed if not present)
+- num-viewport: number of view ports configured in hardware. If a platform
+ does not specify it, the driver assumes 2.
+- bus-range: PCI bus numbers covered (it is recommended for new devicetrees
+ to specify this property, to keep backwards compatibility a range of
+ 0x00-0xff is assumed if not present)
+
EP mode:
-- max-functions: maximum number of functions that can be
- configured
+- max-functions: maximum number of functions that can be configured
Example configuration:
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index cf92d3ba5a26..7b1e48bf172b 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -1,6 +1,6 @@
* Freescale i.MX6 PCIe interface
-This PCIe host controller is based on the Synopsis Designware PCIe IP
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
and thus inherits all the common properties defined in designware-pcie.txt.
Required properties:
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index 7a579c816951..bdb7ab39d2d7 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -1,7 +1,7 @@
HiSilicon Hip05 and Hip06 PCIe host bridge DT description
-HiSilicon PCIe host controller is based on Designware PCI core.
-It shares common functions with PCIe Designware core driver and inherits
+HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core.
+It shares common functions with the PCIe DesignWare core driver and inherits
common properties defined in
Documentation/devicetree/bindings/pci/designware-pci.txt.
diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
index 68ffa0fbcd73..6e217c63123d 100644
--- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
@@ -1,8 +1,8 @@
HiSilicon Kirin SoCs PCIe host DT description
-Kirin PCIe host controller is based on Designware PCI core.
-It shares common functions with PCIe Designware core driver
-and inherits common properties defined in
+Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
+It shares common functions with the PCIe DesignWare core driver and
+inherits common properties defined in
Documentation/devicetree/bindings/pci/designware-pci.txt.
Additional properties are described here:
@@ -16,7 +16,7 @@ Required properties
"apb": apb Ctrl register defined by Kirin;
"phy": apb PHY register defined by Kirin;
"config": PCIe configuration space registers.
-- reset-gpios: The gpio to generate PCIe perst assert and deassert signal.
+- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
Optional properties:
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index ee1c72d5162e..c0484da0f20d 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -15,8 +15,10 @@ Required properties:
- compatible: should contain the platform identifier such as:
"fsl,ls1021a-pcie", "snps,dw-pcie"
"fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
+ "fsl,ls2088a-pcie"
+ "fsl,ls1088a-pcie"
"fsl,ls1046a-pcie"
-- reg: base addresses and lengths of the PCIe controller
+- reg: base addresses and lengths of the PCIe controller register blocks.
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
- interrupt-names: Must include the following entries:
diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt
deleted file mode 100644
index fe80dda9bf73..000000000000
--- a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-MediaTek Gen2 PCIe controller which is available on MT7623 series SoCs
-
-PCIe subsys supports single root complex (RC) with 3 Root Ports. Each root
-ports supports a Gen2 1-lane Link and has PIPE interface to PHY.
-
-Required properties:
-- compatible: Should contain "mediatek,mt7623-pcie".
-- device_type: Must be "pci"
-- reg: Base addresses and lengths of the PCIe controller.
-- #address-cells: Address representation for root ports (must be 3)
-- #size-cells: Size representation for root ports (must be 2)
-- #interrupt-cells: Size representation for interrupts (must be 1)
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
- Please refer to the standard PCI bus binding document for a more detailed
- explanation.
-- clocks: Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
- - free_ck :for reference clock of PCIe subsys
- - sys_ck0 :for clock of Port0
- - sys_ck1 :for clock of Port1
- - sys_ck2 :for clock of Port2
-- resets: Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
- - pcie-rst0 :port0 reset
- - pcie-rst1 :port1 reset
- - pcie-rst2 :port2 reset
-- phys: List of PHY specifiers (used by generic PHY framework).
-- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
- number of PHYs as specified in *phys* property.
-- power-domains: A phandle and power domain specifier pair to the power domain
- which is responsible for collapsing and restoring power to the peripheral.
-- bus-range: Range of bus numbers associated with this controller.
-- ranges: Ranges for the PCI memory and I/O regions.
-
-In addition, the device tree node must have sub-nodes describing each
-PCIe port interface, having the following mandatory properties:
-
-Required properties:
-- device_type: Must be "pci"
-- reg: Only the first four bytes are used to refer to the correct bus number
- and device number.
-- #address-cells: Must be 3
-- #size-cells: Must be 2
-- #interrupt-cells: Must be 1
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
- Please refer to the standard PCI bus binding document for a more detailed
- explanation.
-- ranges: Sub-ranges distributed from the PCIe controller node. An empty
- property is sufficient.
-- num-lanes: Number of lanes to use for this port.
-
-Examples:
-
- hifsys: syscon@1a000000 {
- compatible = "mediatek,mt7623-hifsys",
- "mediatek,mt2701-hifsys",
- "syscon";
- reg = <0 0x1a000000 0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- pcie: pcie-controller@1a140000 {
- compatible = "mediatek,mt7623-pcie";
- device_type = "pci";
- reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
- <0 0x1a142000 0 0x1000>, /* Port0 registers */
- <0 0x1a143000 0 0x1000>, /* Port1 registers */
- <0 0x1a144000 0 0x1000>; /* Port2 registers */
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0xf800 0 0 0>;
- interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
- <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
- <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
- <&hifsys CLK_HIFSYS_PCIE0>,
- <&hifsys CLK_HIFSYS_PCIE1>,
- <&hifsys CLK_HIFSYS_PCIE2>;
- clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
- resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
- <&hifsys MT2701_HIFSYS_PCIE1_RST>,
- <&hifsys MT2701_HIFSYS_PCIE2_RST>;
- reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
- phys = <&pcie0_phy>, <&pcie1_phy>, <&pcie2_phy>;
- phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
- bus-range = <0x00 0xff>;
- ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */
- 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */
-
- pcie@0,0 {
- device_type = "pci";
- reg = <0x0000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
- ranges;
- num-lanes = <1>;
- };
-
- pcie@1,0 {
- device_type = "pci";
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
- ranges;
- num-lanes = <1>;
- };
-
- pcie@2,0 {
- device_type = "pci";
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
- ranges;
- num-lanes = <1>;
- };
- };
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
new file mode 100644
index 000000000000..3a6ce55dd310
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -0,0 +1,284 @@
+MediaTek Gen2 PCIe controller
+
+Required properties:
+- compatible: Should contain one of the following strings:
+ "mediatek,mt2701-pcie"
+ "mediatek,mt2712-pcie"
+ "mediatek,mt7622-pcie"
+ "mediatek,mt7623-pcie"
+- device_type: Must be "pci"
+- reg: Base addresses and lengths of the PCIe subsys and root ports.
+- reg-names: Names of the above areas to use during resource lookup.
+- #address-cells: Address representation for root ports (must be 3)
+- #size-cells: Size representation for root ports (must be 2)
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names:
+ Mandatory entries:
+ - sys_ckN :transaction layer and data link layer clock
+ Required entries for MT2701/MT7623:
+ - free_ck :for reference clock of PCIe subsys
+ Required entries for MT2712/MT7622:
+ - ahb_ckN :AHB slave interface operating clock for CSR access and RC
+ initiated MMIO access
+ Required entries for MT7622:
+ - axi_ckN :application layer MMIO channel operating clock
+ - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when
+ pcie_mac_ck/pcie_pipe_ck is turned off
+ - obff_ckN :OBFF functional block operating clock
+ - pipe_ckN :LTSSM and PHY/MAC layer operating clock
+ where N starting from 0 to one less than the number of root ports.
+- phys: List of PHY specifiers (used by generic PHY framework).
+- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+ number of PHYs as specified in *phys* property.
+- power-domains: A phandle and power domain specifier pair to the power domain
+ which is responsible for collapsing and restoring power to the peripheral.
+- bus-range: Range of bus numbers associated with this controller.
+- ranges: Ranges for the PCI memory and I/O regions.
+
+Required properties for MT7623/MT2701:
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+ Please refer to the standard PCI bus binding document for a more detailed
+ explanation.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
+ number of root ports.
+
+Required properties for MT2712/MT7622:
+-interrupts: A list of interrupt outputs of the controller, must have one
+ entry for each PCIe port
+
+In addition, the device tree node must have sub-nodes describing each
+PCIe port interface, having the following mandatory properties:
+
+Required properties:
+- device_type: Must be "pci"
+- reg: Only the first four bytes are used to refer to the correct bus number
+ and device number.
+- #address-cells: Must be 3
+- #size-cells: Must be 2
+- #interrupt-cells: Must be 1
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+ Please refer to the standard PCI bus binding document for a more detailed
+ explanation.
+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+ property is sufficient.
+- num-lanes: Number of lanes to use for this port.
+
+Examples for MT7623:
+
+ hifsys: syscon@1a000000 {
+ compatible = "mediatek,mt7623-hifsys",
+ "mediatek,mt2701-hifsys",
+ "syscon";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pcie: pcie-controller@1a140000 {
+ compatible = "mediatek,mt7623-pcie";
+ device_type = "pci";
+ reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+ <0 0x1a142000 0 0x1000>, /* Port0 registers */
+ <0 0x1a143000 0 0x1000>, /* Port1 registers */
+ <0 0x1a144000 0 0x1000>; /* Port2 registers */
+ reg-names = "subsys", "port0", "port1", "port2";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 0>;
+ interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+ <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+ <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+ <&hifsys CLK_HIFSYS_PCIE0>,
+ <&hifsys CLK_HIFSYS_PCIE1>,
+ <&hifsys CLK_HIFSYS_PCIE2>;
+ clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+ resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+ <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+ <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+ reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+ phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>,
+ <&pcie2_phy PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */
+ 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */
+
+ pcie@0,0 {
+ device_type = "pci";
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
+ num-lanes = <1>;
+ };
+
+ pcie@1,0 {
+ device_type = "pci";
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
+ num-lanes = <1>;
+ };
+
+ pcie@2,0 {
+ device_type = "pci";
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
+ num-lanes = <1>;
+ };
+ };
+
+Examples for MT2712:
+ pcie: pcie@11700000 {
+ compatible = "mediatek,mt2712-pcie";
+ device_type = "pci";
+ reg = <0 0x11700000 0 0x1000>,
+ <0 0x112ff000 0 0x1000>;
+ reg-names = "port0", "port1";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+ <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
+ <&pericfg CLK_PERI_PCIE0>,
+ <&pericfg CLK_PERI_PCIE1>;
+ clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1";
+ phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy0", "pcie-phy1";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+
+ pcie0: pcie@0,0 {
+ device_type = "pci";
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ num-lanes = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie@1,0 {
+ device_type = "pci";
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ num-lanes = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+Examples for MT7622:
+ pcie: pcie@1a140000 {
+ compatible = "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0 0x1a140000 0 0x1000>,
+ <0 0x1a143000 0 0x1000>,
+ <0 0x1a145000 0 0x1000>;
+ reg-names = "subsys", "port0", "port1";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
+ <&pciesys CLK_PCIE_P1_MAC_EN>,
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P1_AHB_EN>,
+ <&pciesys CLK_PCIE_P0_AUX_EN>,
+ <&pciesys CLK_PCIE_P1_AUX_EN>,
+ <&pciesys CLK_PCIE_P0_AXI_EN>,
+ <&pciesys CLK_PCIE_P1_AXI_EN>,
+ <&pciesys CLK_PCIE_P0_OBFF_EN>,
+ <&pciesys CLK_PCIE_P1_OBFF_EN>,
+ <&pciesys CLK_PCIE_P0_PIPE_EN>,
+ <&pciesys CLK_PCIE_P1_PIPE_EN>;
+ clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
+ "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
+ "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
+ phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy0", "pcie-phy1";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+
+ pcie0: pcie@0,0 {
+ device_type = "pci";
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ num-lanes = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie@1,0 {
+ device_type = "pci";
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ num-lanes = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
index 9c7fce69570b..127ae1f53e5a 100644
--- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -77,7 +77,7 @@ and the following optional properties:
- marvell,pcie-lane: the physical PCIe lane number, for ports having
multiple lanes. If this property is not found, we assume that the
value is 0.
-- reset-gpios: optional gpio to PERST#
+- reset-gpios: optional GPIO to PERST#
- reset-delay-us: delay in us to wait after reset de-assertion, if not
specified will default to 100ms, as required by the PCIe specification.
diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
index 6b115fd10fec..c1e4c3d10a74 100644
--- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt
+++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
@@ -1,6 +1,6 @@
* Marvell Armada 7K/8K PCIe interface
-This PCIe host controller is based on the Synopsis Designware PCIe IP
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
and thus inherits all the common properties defined in designware-pcie.txt.
Required properties:
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
index d08a4d51108f..7e05487544ed 100644
--- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
+++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
@@ -1,12 +1,12 @@
TI Keystone PCIe interface
-Keystone PCI host Controller is based on Designware PCI h/w version 3.65.
-It shares common functions with PCIe Designware core driver and inherit
-common properties defined in
+Keystone PCI host Controller is based on the Synopsys DesignWare PCI
+hardware version 3.65. It shares common functions with the PCIe DesignWare
+core driver and inherits common properties defined in
Documentation/devicetree/bindings/pci/designware-pci.txt
Please refer to Documentation/devicetree/bindings/pci/designware-pci.txt
-for the details of Designware DT bindings. Additional properties are
+for the details of DesignWare DT bindings. Additional properties are
described here as well as properties that are not applicable.
Required Properties:-
@@ -52,13 +52,12 @@ pcie_intc: Interrupt controller device node for Legacy IRQ chip
};
Optional properties:-
- phys: phandle to Generic Keystone SerDes phy for PCI
- phy-names: name of the Generic Keystine SerDes phy for PCI
+ phys: phandle to generic Keystone SerDes PHY for PCI
+ phy-names: name of the generic Keystone SerDes PHY for PCI
- If boot loader already does PCI link establishment, then phys and
phy-names shouldn't be present.
interrupts: platform interrupt for error interrupts.
-Designware DT Properties not applicable for Keystone PCI
+DesignWare DT Properties not applicable for Keystone PCI
1. pcie_bus clock-names not used. Instead, a phandle to phys is used.
-
diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
index 07a75094c5a8..3d038638612b 100644
--- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
@@ -6,11 +6,14 @@ AHB. There is one bridge instance per USB port connected to the internal
OHCI and EHCI controllers.
Required properties:
-- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
+- compatible: "renesas,pci-r8a7743" for the R8A7743 SoC;
+ "renesas,pci-r8a7745" for the R8A7745 SoC;
+ "renesas,pci-r8a7790" for the R8A7790 SoC;
"renesas,pci-r8a7791" for the R8A7791 SoC;
"renesas,pci-r8a7793" for the R8A7793 SoC;
"renesas,pci-r8a7794" for the R8A7794 SoC;
- "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device
+ "renesas,pci-rcar-gen2" for a generic R-Car Gen2 or
+ RZ/G1 compatible device.
When compatible with the generic version, nodes must list the
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 9d418b71774f..3c9d321b3d3b 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -9,6 +9,7 @@
- "qcom,pcie-apq8084" for apq8084
- "qcom,pcie-msm8996" for msm8996 or apq8096
- "qcom,pcie-ipq4019" for ipq4019
+ - "qcom,pcie-ipq8074" for ipq8074
- reg:
Usage: required
@@ -20,7 +21,7 @@
Value type: <stringlist>
Definition: Must include the following entries
- "parf" Qualcomm specific registers
- - "dbi" Designware PCIe registers
+ - "dbi" DesignWare PCIe registers
- "elbi" External local bus interface registers
- "config" PCIe configuration space
@@ -105,6 +106,16 @@
- "bus_master" Master AXI clock
- "bus_slave" Slave AXI clock
+- clock-names:
+ Usage: required for ipq8074
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ - "iface" PCIe to SysNOC BIU clock
+ - "axi_m" AXI Master clock
+ - "axi_s" AXI Slave clock
+ - "ahb" AHB clock
+ - "aux" Auxiliary clock
+
- resets:
Usage: required
Value type: <prop-encoded-array>
@@ -144,6 +155,18 @@
- "ahb" AHB reset
- "phy_ahb" PHY AHB reset
+- reset-names:
+ Usage: required for ipq8074
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ - "pipe" PIPE reset
+ - "sleep" Sleep reset
+ - "sticky" Core Sticky reset
+ - "axi_m" AXI Master reset
+ - "axi_s" AXI Slave reset
+ - "ahb" AHB Reset
+ - "axi_m_sticky" AXI Master Sticky reset
+
- power-domains:
Usage: required for apq8084 and msm8996/apq8096
Value type: <prop-encoded-array>
@@ -180,7 +203,7 @@
- <name>-gpios:
Usage: optional
Value type: <prop-encoded-array>
- Definition: List of phandle and gpio specifier pairs. Should contain
+ Definition: List of phandle and GPIO specifier pairs. Should contain
- "perst-gpios" PCIe endpoint reset signal line
- "wake-gpios" PCIe endpoint wake signal line
diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
index 8e0a1eb0acbb..a04ab1b76211 100644
--- a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
@@ -71,7 +71,7 @@
- interrupt-map: standard PCI properties to define the mapping of the
PCI interface to interrupt numbers.
- The PCI host bridge node migh have additional sub-nodes representing
+ The PCI host bridge node might have additional sub-nodes representing
the onboard PCI devices/PCI slots. Each such sub-node must have the
following mandatory properties:
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index a7e3dd43b2a8..76ba3a61d1a3 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -14,7 +14,7 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
SoC-specific version corresponding to the platform first
followed by the generic version.
-- reg: base address and length of the pcie controller registers.
+- reg: base address and length of the PCIe controller registers.
- #address-cells: set to <3>
- #size-cells: set to <2>
- bus-range: PCI bus numbers covered
@@ -25,15 +25,14 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
source for hardware related interrupts (e.g. link speed change).
- #interrupt-cells: set to <1>
- interrupt-map-mask and interrupt-map: standard PCI properties
- to define the mapping of the PCIe interface to interrupt
- numbers.
+ to define the mapping of the PCIe interface to interrupt numbers.
- clocks: from common clock binding: clock specifiers for the PCIe controller
and PCIe bus clocks.
- clock-names: from common clock binding: should be "pcie" and "pcie_bus".
Example:
-SoC specific DT Entry:
+SoC-specific DT Entry:
pcie: pcie@fe000000 {
compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
index 1453a734c2f5..af34c65773fd 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
@@ -19,8 +19,6 @@ Required properties:
- "pm"
- msi-map: Maps a Requester ID to an MSI controller and associated
msi-specifier data. See ./pci-msi.txt
-- phys: From PHY bindings: Phandle for the Generic PHY for PCIe.
-- phy-names: MUST be "pcie-phy".
- interrupts: Three interrupt entries must be specified.
- interrupt-names: Must include the following names
- "sys"
@@ -42,11 +40,24 @@ Required properties:
interrupt source. The value must be 1.
- interrupt-map-mask and interrupt-map: standard PCI properties
+Required properties for legacy PHY model (deprecated):
+- phys: From PHY bindings: Phandle for the Generic PHY for PCIe.
+- phy-names: MUST be "pcie-phy".
+
+Required properties for per-lane PHY model (preferred):
+- phys: Must contain an phandle to a PHY for each entry in phy-names.
+- phy-names: Must include 4 entries for all 4 lanes even if some of
+ them won't be used for your cases. Entries are of the form "pcie-phy-N":
+ where N ranges from 0 to 3.
+ (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt
+ for changing the #phy-cells of phy node to support it)
+
Optional Property:
- aspm-no-l0s: RC won't support ASPM L0s. This property is needed if
using 24MHz OSC for RC's PHY.
-- ep-gpios: contain the entry for pre-reset gpio
+- ep-gpios: contain the entry for pre-reset GPIO
- num-lanes: number of lanes to use
+- vpcie12v-supply: The phandle to the 12v regulator to use for PCIe.
- vpcie3v3-supply: The phandle to the 3.3v regulator to use for PCIe.
- vpcie1v8-supply: The phandle to the 1.8v regulator to use for PCIe.
- vpcie0v9-supply: The phandle to the 0.9v regulator to use for PCIe.
@@ -95,6 +106,7 @@ pcie0: pcie@f8000000 {
<&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
"pm", "pclk", "aclk";
+ /* deprecated legacy PHY model */
phys = <&pcie_phy>;
phy-names = "pcie-phy";
pinctrl-names = "default";
@@ -111,3 +123,13 @@ pcie0: pcie@f8000000 {
#interrupt-cells = <1>;
};
};
+
+pcie0: pcie@f8000000 {
+ ...
+
+ /* preferred per-lane PHY model */
+ phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
+ phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
+
+ ...
+};
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
index 7d3b09474657..34a11bfbfb60 100644
--- a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
@@ -1,29 +1,29 @@
* Samsung Exynos 5440 PCIe interface
-This PCIe host controller is based on the Synopsis Designware PCIe IP
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
and thus inherits all the common properties defined in designware-pcie.txt.
Required properties:
- compatible: "samsung,exynos5440-pcie"
-- reg: base addresses and lengths of the pcie controller,
- the phy controller, additional register for the phy controller.
- (Registers for the phy controller are DEPRECATED.
+- reg: base addresses and lengths of the PCIe controller,
+ the PHY controller, additional register for the PHY controller.
+ (Registers for the PHY controller are DEPRECATED.
Use the PHY framework.)
- reg-names : First name should be set to "elbi".
- And use the "config" instead of getting the confgiruation address space
+ And use the "config" instead of getting the configuration address space
from "ranges".
- NOTE: When use the "config" property, reg-names must be set.
+ NOTE: When using the "config" property, reg-names must be set.
- interrupts: A list of interrupt outputs for level interrupt,
pulse interrupt, special interrupt.
-- phys: From PHY binding. Phandle for the Generic PHY.
+- phys: From PHY binding. Phandle for the generic PHY.
Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt
-Other common properties refer to
- Documentation/devicetree/binding/pci/designware-pcie.txt
+For other common properties, refer to
+ Documentation/devicetree/bindings/pci/designware-pcie.txt
Example:
-SoC specific DT Entry:
+SoC-specific DT Entry:
pcie@290000 {
compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
@@ -83,7 +83,7 @@ With using PHY framework:
...
};
-Board specific DT Entry:
+Board-specific DT Entry:
pcie@290000 {
reset-gpio = <&pin_ctrl 5 0>;
diff --git a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt
index 49ea76da7718..d5a14f5dad46 100644
--- a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt
@@ -1,12 +1,12 @@
SPEAr13XX PCIe DT detail:
================================
-SPEAr13XX uses synopsis designware PCIe controller and ST MiPHY as phy
+SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY
controller.
Required properties:
-- compatible : should be "st,spear1340-pcie", "snps,dw-pcie".
-- phys : phandle to phy node associated with pcie controller
+- compatible : should be "st,spear1340-pcie", "snps,dw-pcie".
+- phys : phandle to PHY node associated with PCIe controller
- phy-names : must be "pcie-phy"
- All other definitions as per generic PCI bindings
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 6a07c96227e0..7f7af3044016 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -1,6 +1,6 @@
TI PCI Controllers
-PCIe Designware Controller
+PCIe DesignWare Controller
- compatible: Should be "ti,dra7-pcie" for RC
Should be "ti,dra7-pcie-ep" for EP
- phys : list of PHY specifiers (used by generic PHY framework)
@@ -13,7 +13,7 @@ PCIe Designware Controller
HOST MODE
=========
- reg : Two register ranges as listed in the reg-names property
- - reg-names : The first entry must be "ti-conf" for the TI specific registers
+ - reg-names : The first entry must be "ti-conf" for the TI-specific registers
The second entry must be "rc-dbics" for the DesignWare PCIe
registers
The third entry must be "config" for the PCIe configuration space
@@ -30,7 +30,7 @@ HOST MODE
DEVICE MODE
===========
- reg : Four register ranges as listed in the reg-names property
- - reg-names : "ti-conf" for the TI specific registers
+ - reg-names : "ti-conf" for the TI-specific registers
"ep_dbics" for the standard configuration registers as
they are locally accessed within the DIF CS space
"ep_dbics2" for the standard configuration registers as
@@ -46,7 +46,7 @@ DEVICE MODE
access.
Optional Property:
- - gpios : Should be added if a gpio line is required to drive PERST# line
+ - gpios : Should be added if a GPIO line is required to drive PERST# line
NOTE: Two DT nodes may be added for each PCI controller; one for host
mode and another for device mode. So in order for PCI to
diff --git a/Documentation/devicetree/bindings/pci/versatile.txt b/Documentation/devicetree/bindings/pci/versatile.txt
index ebd1e7d0403e..0a702b13d2ac 100644
--- a/Documentation/devicetree/bindings/pci/versatile.txt
+++ b/Documentation/devicetree/bindings/pci/versatile.txt
@@ -5,7 +5,7 @@ PCI host controller found on the ARM Versatile PB board's FPGA.
Required properties:
- compatible: should contain "arm,versatile-pci" to identify the Versatile PCI
controller.
-- reg: base addresses and lengths of the pci controller. There must be 3
+- reg: base addresses and lengths of the PCI controller. There must be 3
entries:
- Versatile-specific registers
- Self Config space
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
index 54bac7f8860c..85d9b95234f7 100644
--- a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
+++ b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
@@ -4,7 +4,7 @@ Required properties:
- compatible: should be "apm,xgene1-msi" to identify
X-Gene v1 PCIe MSI controller block.
-- msi-controller: indicates that this is X-Gene v1 PCIe MSI controller node
+- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node
- reg: physical base address (0x79000000) and length (0x900000) for controller
registers. These registers include the MSI termination address and data
registers as well as the MSI interrupt status registers.
@@ -13,7 +13,8 @@ Required properties:
interrupt number 0x10 to 0x1f.
- interrupt-names: not required
-Each PCIe node needs to have property msi-parent that points to msi controller node
+Each PCIe node needs to have property msi-parent that points to an MSI
+controller node
Examples:
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
index 1070b068c7c6..6fd2decfa66c 100644
--- a/Documentation/devicetree/bindings/pci/xgene-pci.txt
+++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
@@ -8,7 +8,7 @@ Required properties:
property.
- reg-names: Must include the following entries:
"csr": controller configuration registers.
- "cfg": pcie configuration space registers.
+ "cfg": PCIe configuration space registers.
- #address-cells: set to <3>
- #size-cells: set to <2>
- ranges: ranges for the outbound memory, I/O regions.
@@ -21,11 +21,11 @@ Required properties:
Optional properties:
- status: Either "ok" or "disabled".
-- dma-coherent: Present if dma operations are coherent
+- dma-coherent: Present if DMA operations are coherent
Example:
-SoC specific DT Entry:
+SoC-specific DT Entry:
pcie0: pcie@1f2b0000 {
status = "disabled";
@@ -51,7 +51,7 @@ SoC specific DT Entry:
};
-Board specific DT Entry:
+Board-specific DT Entry:
&pcie0 {
status = "ok";
};
diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
index 3259798a1192..01bf7fdf4c19 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
@@ -15,9 +15,9 @@ Required properties:
- device_type: must be "pci"
- interrupts: Should contain NWL PCIe interrupt
- interrupt-names: Must include the following entries:
- "msi1, msi0": interrupt asserted when MSI is received
+ "msi1, msi0": interrupt asserted when an MSI is received
"intx": interrupt asserted when a legacy interrupt is received
- "misc": interrupt asserted when miscellaneous is received
+ "misc": interrupt asserted when miscellaneous interrupt is received
- interrupt-map-mask and interrupt-map: standard PCI properties to define the
mapping of the PCI interface to interrupt numbers.
- ranges: ranges for the PCI memory regions (I/O space region is not
@@ -26,7 +26,8 @@ Required properties:
detailed explanation
- msi-controller: indicates that this is MSI controller node
- msi-parent: MSI parent of the root complex itself
-- legacy-interrupt-controller: Interrupt controller device node for Legacy interrupts
+- legacy-interrupt-controller: Interrupt controller device node for Legacy
+ interrupts
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: should be set to 1
- #address-cells: specifies the number of cells needed to encode an
diff --git a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
index 0f6222a672ce..b496042f1f44 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
@@ -3,7 +3,6 @@ Rockchip PCIE PHY
Required properties:
- compatible: rockchip,rk3399-pcie-phy
- - #phy-cells: must be 0
- clocks: Must contain an entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must be "refclk"
@@ -11,6 +10,12 @@ Required properties:
See ../reset/reset.txt for details.
- reset-names: Must be "phy"
+Required properties for legacy PHY mode (deprecated):
+ - #phy-cells: must be 0
+
+Required properties for per-lane PHY mode (preferred):
+ - #phy-cells: must be 1
+
Example:
grf: syscon@ff770000 {