diff options
Diffstat (limited to 'Documentation')
15 files changed, 207 insertions, 22 deletions
diff --git a/Documentation/admin-guide/cgroup-v1/memory.rst b/Documentation/admin-guide/cgroup-v1/memory.rst index 5f502bf68fbc..ff456871bf4b 100644 --- a/Documentation/admin-guide/cgroup-v1/memory.rst +++ b/Documentation/admin-guide/cgroup-v1/memory.rst @@ -92,6 +92,13 @@ Brief summary of control files. memory.oom_control set/show oom controls. memory.numa_stat show the number of memory usage per numa node + memory.kmem.limit_in_bytes Deprecated knob to set and read the kernel + memory hard limit. Kernel hard limit is not + supported since 5.16. Writing any value to + do file will not have any effect same as if + nokmem kernel parameter was specified. + Kernel memory is still charged and reported + by memory.kmem.usage_in_bytes. memory.kmem.usage_in_bytes show current kernel memory allocation memory.kmem.failcnt show the number of kernel memory usage hits limits diff --git a/Documentation/arch/arm64/cpu-feature-registers.rst b/Documentation/arch/arm64/cpu-feature-registers.rst index 4e4625f2455f..de6d8a4790e2 100644 --- a/Documentation/arch/arm64/cpu-feature-registers.rst +++ b/Documentation/arch/arm64/cpu-feature-registers.rst @@ -175,6 +175,8 @@ infrastructure: +------------------------------+---------+---------+ | Name | bits | visible | +------------------------------+---------+---------+ + | SME | [27-24] | y | + +------------------------------+---------+---------+ | MTE | [11-8] | y | +------------------------------+---------+---------+ | SSBS | [7-4] | y | @@ -288,8 +290,18 @@ infrastructure: +------------------------------+---------+---------+ | Name | bits | visible | +------------------------------+---------+---------+ + | CSSC | [55-52] | y | + +------------------------------+---------+---------+ + | RPRFM | [51-48] | y | + +------------------------------+---------+---------+ + | BC | [23-20] | y | + +------------------------------+---------+---------+ | MOPS | [19-16] | y | +------------------------------+---------+---------+ + | APA3 | [15-12] | y | + +------------------------------+---------+---------+ + | GPA3 | [11-8] | y | + +------------------------------+---------+---------+ | RPRES | [7-4] | y | +------------------------------+---------+---------+ | WFXT | [3-0] | y | diff --git a/Documentation/arch/arm64/elf_hwcaps.rst b/Documentation/arch/arm64/elf_hwcaps.rst index 8c8addb4194c..76ff9d7398fd 100644 --- a/Documentation/arch/arm64/elf_hwcaps.rst +++ b/Documentation/arch/arm64/elf_hwcaps.rst @@ -305,6 +305,9 @@ HWCAP2_SMEF16F16 HWCAP2_MOPS Functionality implied by ID_AA64ISAR2_EL1.MOPS == 0b0001. +HWCAP2_HBC + Functionality implied by ID_AA64ISAR2_EL1.BC == 0b0001. + 4. Unused AT_HWCAP bits ----------------------- diff --git a/Documentation/arch/loongarch/introduction.rst b/Documentation/arch/loongarch/introduction.rst index 49135d451ced..8c568cfc2107 100644 --- a/Documentation/arch/loongarch/introduction.rst +++ b/Documentation/arch/loongarch/introduction.rst @@ -381,9 +381,9 @@ Documentation of LoongArch ISA: Documentation of LoongArch ELF psABI: - https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.00-CN.pdf (in Chinese) + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.01-CN.pdf (in Chinese) - https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.00-EN.pdf (in English) + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.01-EN.pdf (in English) Linux kernel repository of Loongson and LoongArch: diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml index 337ddf1113c4..4e867dd4d402 100644 --- a/Documentation/devicetree/bindings/ata/pata-common.yaml +++ b/Documentation/devicetree/bindings/ata/pata-common.yaml @@ -38,6 +38,7 @@ patternProperties: ID number 0 and the slave drive will have ID number 1. The PATA port nodes will be named "ide-port". type: object + additionalProperties: false properties: reg: diff --git a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml index 839648e753d4..42b6f80613f3 100644 --- a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml @@ -37,6 +37,9 @@ properties: maxItems: 1 '#clock-cells': + description: + The index in the assigned-clocks is mapped to the output clock as below + 0 - REF, 1 - SE1, 2 - SE2, 3 - SE3, 4 - DIFF1, 5 - DIFF2. const: 1 clocks: @@ -68,7 +71,7 @@ examples: reg = <0x68>; #clock-cells = <1>; - clocks = <&x1_x2>; + clocks = <&x1>; renesas,settings = [ 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf @@ -79,8 +82,8 @@ examples: assigned-clocks = <&versa3 0>, <&versa3 1>, <&versa3 2>, <&versa3 3>, <&versa3 4>, <&versa3 5>; - assigned-clock-rates = <12288000>, <25000000>, - <12000000>, <11289600>, - <11289600>, <24000000>; + assigned-clock-rates = <24000000>, <11289600>, + <11289600>, <12000000>, + <25000000>, <12288000>; }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml index 21ae7bce038e..171a41407241 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml @@ -9,6 +9,9 @@ title: Freescale MXS Inter IC (I2C) Controller maintainers: - Shawn Guo <shawnguo@kernel.org> +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + properties: compatible: enum: @@ -37,7 +40,7 @@ required: - dmas - dma-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index cf29ab10501c..b1b2cf81b42f 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -270,6 +270,7 @@ allOf: contains: enum: - qcom,msm8998-smmu-v2 + - qcom,sdm630-smmu-v2 then: anyOf: - properties: @@ -311,7 +312,6 @@ allOf: compatible: contains: enum: - - qcom,sdm630-smmu-v2 - qcom,sm6375-smmu-v2 then: anyOf: diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml index 9804d13de648..6a6f222b868f 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml @@ -31,10 +31,6 @@ properties: charger: $ref: /schemas/power/supply/maxim,max77693.yaml - connector: - $ref: /schemas/connector/usb-connector.yaml# - unevaluatedProperties: false - led: $ref: /schemas/leds/maxim,max77693.yaml diff --git a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml index da2dcfeebf12..510f6cb0f084 100644 --- a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml +++ b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml @@ -11,11 +11,16 @@ maintainers: properties: compatible: - items: - - enum: - - loongson,ls2k0500-pmc - - loongson,ls2k1000-pmc - - const: syscon + oneOf: + - items: + - const: loongson,ls2k0500-pmc + - const: syscon + - items: + - enum: + - loongson,ls2k1000-pmc + - loongson,ls2k2000-pmc + - const: loongson,ls2k0500-pmc + - const: syscon reg: maxItems: 1 @@ -32,6 +37,18 @@ properties: addition, the PM need according to it to indicate that current SoC whether support Suspend To RAM. + syscon-poweroff: + $ref: /schemas/power/reset/syscon-poweroff.yaml# + type: object + description: + Node for power off method + + syscon-reboot: + $ref: /schemas/power/reset/syscon-reboot.yaml# + type: object + description: + Node for reboot method + required: - compatible - reg @@ -44,9 +61,23 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> power-management@1fe27000 { - compatible = "loongson,ls2k1000-pmc", "syscon"; + compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon"; reg = <0x1fe27000 0x58>; interrupt-parent = <&liointc1>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; loongson,suspend-address = <0x0 0x1c000500>; + + syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x30>; + mask = <0x1>; + }; + + syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmc>; + offset = <0x14>; + mask = <0x3c00>; + value = <0x3c00>; + }; }; diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml index 2f593c7225e5..14cac0e6e0a1 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml @@ -23,6 +23,13 @@ properties: - const: fsl,imx51-ecspi - const: fsl,imx53-ecspi - items: + - enum: + - fsl,imx25-cspi + - fsl,imx50-cspi + - fsl,imx51-cspi + - fsl,imx53-cspi + - const: fsl,imx35-cspi + - items: - const: fsl,imx8mp-ecspi - const: fsl,imx6ul-ecspi - items: diff --git a/Documentation/filesystems/porting.rst b/Documentation/filesystems/porting.rst index deac4e973ddc..4d05b9862451 100644 --- a/Documentation/filesystems/porting.rst +++ b/Documentation/filesystems/porting.rst @@ -949,3 +949,99 @@ mmap_lock held. All in-tree users have been audited and do not seem to depend on the mmap_lock being held, but out of tree users should verify for themselves. If they do need it, they can return VM_FAULT_RETRY to be called with the mmap_lock held. + +--- + +**mandatory** + +The order of opening block devices and matching or creating superblocks has +changed. + +The old logic opened block devices first and then tried to find a +suitable superblock to reuse based on the block device pointer. + +The new logic tries to find a suitable superblock first based on the device +number, and opening the block device afterwards. + +Since opening block devices cannot happen under s_umount because of lock +ordering requirements s_umount is now dropped while opening block devices and +reacquired before calling fill_super(). + +In the old logic concurrent mounters would find the superblock on the list of +superblocks for the filesystem type. Since the first opener of the block device +would hold s_umount they would wait until the superblock became either born or +was discarded due to initialization failure. + +Since the new logic drops s_umount concurrent mounters could grab s_umount and +would spin. Instead they are now made to wait using an explicit wait-wake +mechanism without having to hold s_umount. + +--- + +**mandatory** + +The holder of a block device is now the superblock. + +The holder of a block device used to be the file_system_type which wasn't +particularly useful. It wasn't possible to go from block device to owning +superblock without matching on the device pointer stored in the superblock. +This mechanism would only work for a single device so the block layer couldn't +find the owning superblock of any additional devices. + +In the old mechanism reusing or creating a superblock for a racing mount(2) and +umount(2) relied on the file_system_type as the holder. This was severly +underdocumented however: + +(1) Any concurrent mounter that managed to grab an active reference on an + existing superblock was made to wait until the superblock either became + ready or until the superblock was removed from the list of superblocks of + the filesystem type. If the superblock is ready the caller would simple + reuse it. + +(2) If the mounter came after deactivate_locked_super() but before + the superblock had been removed from the list of superblocks of the + filesystem type the mounter would wait until the superblock was shutdown, + reuse the block device and allocate a new superblock. + +(3) If the mounter came after deactivate_locked_super() and after + the superblock had been removed from the list of superblocks of the + filesystem type the mounter would reuse the block device and allocate a new + superblock (the bd_holder point may still be set to the filesystem type). + +Because the holder of the block device was the file_system_type any concurrent +mounter could open the block devices of any superblock of the same +file_system_type without risking seeing EBUSY because the block device was +still in use by another superblock. + +Making the superblock the owner of the block device changes this as the holder +is now a unique superblock and thus block devices associated with it cannot be +reused by concurrent mounters. So a concurrent mounter in (2) could suddenly +see EBUSY when trying to open a block device whose holder was a different +superblock. + +The new logic thus waits until the superblock and the devices are shutdown in +->kill_sb(). Removal of the superblock from the list of superblocks of the +filesystem type is now moved to a later point when the devices are closed: + +(1) Any concurrent mounter managing to grab an active reference on an existing + superblock is made to wait until the superblock is either ready or until + the superblock and all devices are shutdown in ->kill_sb(). If the + superblock is ready the caller will simply reuse it. + +(2) If the mounter comes after deactivate_locked_super() but before + the superblock has been removed from the list of superblocks of the + filesystem type the mounter is made to wait until the superblock and the + devices are shut down in ->kill_sb() and the superblock is removed from the + list of superblocks of the filesystem type. The mounter will allocate a new + superblock and grab ownership of the block device (the bd_holder pointer of + the block device will be set to the newly allocated superblock). + +(3) This case is now collapsed into (2) as the superblock is left on the list + of superblocks of the filesystem type until all devices are shutdown in + ->kill_sb(). In other words, if the superblock isn't on the list of + superblock of the filesystem type anymore then it has given up ownership of + all associated block devices (the bd_holder pointer is NULL). + +As this is a VFS level change it has no practical consequences for filesystems +other than that all of them must use one of the provided kill_litter_super(), +kill_anon_super(), or kill_block_super() helpers. diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst index 858ed5d80def..0135905c0aa3 100644 --- a/Documentation/kbuild/kconfig-language.rst +++ b/Documentation/kbuild/kconfig-language.rst @@ -573,6 +573,32 @@ above, leading to: bool "Support for foo hardware" depends on ARCH_FOO_VENDOR || COMPILE_TEST +Optional dependencies +~~~~~~~~~~~~~~~~~~~~~ + +Some drivers are able to optionally use a feature from another module +or build cleanly with that module disabled, but cause a link failure +when trying to use that loadable module from a built-in driver. + +The most common way to express this optional dependency in Kconfig logic +uses the slightly counterintuitive:: + + config FOO + tristate "Support for foo hardware" + depends on BAR || !BAR + +This means that there is either a dependency on BAR that disallows +the combination of FOO=y with BAR=m, or BAR is completely disabled. +For a more formalized approach if there are multiple drivers that have +the same dependency, a helper symbol can be used, like:: + + config FOO + tristate "Support for foo hardware" + depends on BAR_OPTIONAL + + config BAR_OPTIONAL + def_tristate BAR || !BAR + Kconfig recursive dependency limitations ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/tools/rtla/rtla-timerlat-hist.rst b/Documentation/tools/rtla/rtla-timerlat-hist.rst index 057db78d4095..03b7f3deb069 100644 --- a/Documentation/tools/rtla/rtla-timerlat-hist.rst +++ b/Documentation/tools/rtla/rtla-timerlat-hist.rst @@ -36,11 +36,11 @@ EXAMPLE In the example below, **rtla timerlat hist** is set to run for *10* minutes, in the cpus *0-4*, *skipping zero* only lines. Moreover, **rtla timerlat hist** will change the priority of the *timerlat* threads to run under -*SCHED_DEADLINE* priority, with a *10us* runtime every *1ms* period. The +*SCHED_DEADLINE* priority, with a *100us* runtime every *1ms* period. The *1ms* period is also passed to the *timerlat* tracer. Auto-analysis is disabled to reduce overhead :: - [root@alien ~]# timerlat hist -d 10m -c 0-4 -P d:100us:1ms -p 1ms --no-aa + [root@alien ~]# timerlat hist -d 10m -c 0-4 -P d:100us:1ms -p 1000 --no-aa # RTLA timerlat histogram # Time unit is microseconds (us) # Duration: 0 00:10:00 diff --git a/Documentation/translations/zh_CN/arch/loongarch/introduction.rst b/Documentation/translations/zh_CN/arch/loongarch/introduction.rst index cba04befc950..59d6bf33050c 100644 --- a/Documentation/translations/zh_CN/arch/loongarch/introduction.rst +++ b/Documentation/translations/zh_CN/arch/loongarch/introduction.rst @@ -344,9 +344,9 @@ LoongArch指令集架构的文档： LoongArch的ELF psABI文档： - https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.00-CN.pdf （中文版） + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.01-CN.pdf （中文版） - https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.00-EN.pdf （英文版） + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.01-EN.pdf （英文版） Loongson与LoongArch的Linux内核源码仓库： |