diff options
Diffstat (limited to 'Documentation')
23 files changed, 75 insertions, 43 deletions
diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst index 7ca8df5451d4..68b21395a743 100644 --- a/Documentation/admin-guide/sysctl/kernel.rst +++ b/Documentation/admin-guide/sysctl/kernel.rst @@ -1458,11 +1458,22 @@ unprivileged_bpf_disabled ========================= Writing 1 to this entry will disable unprivileged calls to ``bpf()``; -once disabled, calling ``bpf()`` without ``CAP_SYS_ADMIN`` will return -``-EPERM``. +once disabled, calling ``bpf()`` without ``CAP_SYS_ADMIN`` or ``CAP_BPF`` +will return ``-EPERM``. Once set to 1, this can't be cleared from the +running kernel anymore. -Once set, this can't be cleared. +Writing 2 to this entry will also disable unprivileged calls to ``bpf()``, +however, an admin can still change this setting later on, if needed, by +writing 0 or 1 to this entry. +If ``BPF_UNPRIV_DEFAULT_OFF`` is enabled in the kernel config, then this +entry will default to 2 instead of 0. + += ============================================================= +0 Unprivileged calls to ``bpf()`` are enabled +1 Unprivileged calls to ``bpf()`` are disabled without recovery +2 Unprivileged calls to ``bpf()`` are disabled += ============================================================= watchdog ======== diff --git a/Documentation/core-api/irq/irq-domain.rst b/Documentation/core-api/irq/irq-domain.rst index 8214e215a8bf..53283b3729a1 100644 --- a/Documentation/core-api/irq/irq-domain.rst +++ b/Documentation/core-api/irq/irq-domain.rst @@ -146,7 +146,6 @@ Legacy irq_domain_add_simple() irq_domain_add_legacy() - irq_domain_add_legacy_isa() irq_domain_create_simple() irq_domain_create_legacy() diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index c268debe5b8d..28675b0b80f1 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -60,7 +60,6 @@ properties: maxItems: 2 idt,xtal-load-femtofarads: - $ref: /schemas/types.yaml#/definitions/uint32 minimum: 9000 maximum: 22760 description: Optional load capacitor for XTAL1 and XTAL2 @@ -84,7 +83,6 @@ patternProperties: enum: [ 1800000, 2500000, 3300000 ] idt,slew-percent: description: The Slew rate control for CMOS single-ended. - $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 80, 85, 90, 100 ] required: diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml index 7b553d559c83..98c6fcf7bf26 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml @@ -46,6 +46,13 @@ properties: description: | I2C bus timeout in microseconds + fsl,i2c-erratum-a004447: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Indicates the presence of QorIQ erratum A-004447, which + says that the standard i2c recovery scheme mechanism does + not work and an alternate implementation is needed. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 6f2398cdc82d..1e7894e524f9 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -102,7 +102,6 @@ patternProperties: st,adc-channel-names: description: List of single-ended channel names. - $ref: /schemas/types.yaml#/definitions/string-array st,filter-order: description: | diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index 74244d21d2b3..d41d8743aad4 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -38,6 +38,5 @@ properties: Duration in seconds which the key should be kept pressed for device to reset automatically. Device with key pressed reset feature can specify this property. - $ref: /schemas/types.yaml#/definitions/uint32 additionalProperties: true diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index cb6498108b78..36c955965d90 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -92,7 +92,6 @@ properties: this interconnect to send RPMh commands. qcom,bcm-voter-names: - $ref: /schemas/types.yaml#/definitions/string-array description: | Names for each of the qcom,bcm-voters specified. diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 1ecd1831cf02..c84f9fe7f254 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -145,6 +145,19 @@ properties: required: - affinity + clocks: + maxItems: 1 + + clock-names: + items: + - const: aclk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + dependencies: mbi-ranges: [ msi-controller ] msi-controller: [ mbi-ranges ] diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml index b67b8cbd33fc..abb22db3bb28 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml @@ -29,6 +29,7 @@ properties: - renesas,intc-ex-r8a774c0 # RZ/G2E - renesas,intc-ex-r8a7795 # R-Car H3 - renesas,intc-ex-r8a7796 # R-Car M3-W + - renesas,intc-ex-r8a77961 # R-Car M3-W+ - renesas,intc-ex-r8a77965 # R-Car M3-N - renesas,intc-ex-r8a77970 # R-Car V3M - renesas,intc-ex-r8a77980 # R-Car V3H diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt index ccebce597f37..a555d94084b7 100644 --- a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt +++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt @@ -4,8 +4,8 @@ This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268. In these SoCs it's possible to control LEDs both as GPIOs or by hardware. However, on some devices there are Serial LEDs (LEDs connected to a 74x164 controller), which can either be controlled by software (exporting the 74x164 -as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or -by hardware using this driver. +as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), +or by hardware using this driver. Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and exporting the 74x164 as spi-gpio prevents those LEDs to be hardware controlled, so the only chance to keep them working is by using this driver. diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt index da5708e7b43b..6e51c6b91ee5 100644 --- a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt +++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt @@ -3,7 +3,7 @@ LEDs connected to Broadcom BCM6358 controller This controller is present on BCM6358 and BCM6368. In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller), which can either be controlled by software (exporting the 74x164 as spi-gpio. -See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or +See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware using this driver. Required properties: diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml index f1bdaeab4053..ce505a7c006a 100644 --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml @@ -99,32 +99,26 @@ properties: Indicates that the channel acts as primary among the bonded channels. port: - type: object + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false description: - Child port node corresponding to the data input, in accordance with the - video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - The port node must contain at least one endpoint. + Child port node corresponding to the data input. The port node must + contain at least one endpoint. properties: endpoint: - type: object + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false properties: - remote-endpoint: - description: - A phandle to the remote tuner endpoint subnode in remote node - port. - sync-active: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] description: Indicates sync signal polarity, 0/1 for low/high respectively. This property maps to SYNCAC bit in the hardware manual. The default is 1 (active high). - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 7443490d4cc6..5fe6d3dceb08 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -105,7 +105,6 @@ properties: - description: Whether the IPA clock is enabled (if valid) qcom,smem-state-names: - $ref: /schemas/types.yaml#/definitions/string-array description: The names of the state bits used for SMP2P output items: - const: ipa-clock-enabled-valid diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index 8ce5ed8a58dd..c101a1ec846e 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -10,7 +10,7 @@ allOf: - $ref: ethernet-controller.yaml# maintainers: - - Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> + - Sergei Shtylyov <sergei.shtylyov@gmail.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt index d479ad977e24..b6791702bcfc 100644 --- a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt @@ -9,7 +9,6 @@ Required properties: "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173 "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192 "mediatek,mt8516-efuse", "mediatek,efuse": for MT8516 - "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192 - reg: Should contain registers location and length = Data cells = diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index 01dcd14e7b2a..320a232c7208 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -118,7 +118,7 @@ patternProperties: description: Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC, EXTERNAL_SSC or INTERNAL_SSC. - Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used. + Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used. $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] default: 0 diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml index db1aa238cda5..b62c2431f94e 100644 --- a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml @@ -20,7 +20,7 @@ properties: maxItems: 1 phys: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: phandle to the USB phy monitored-battery: diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml index b4c190bddd84..61802a11baf4 100644 --- a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml @@ -49,7 +49,7 @@ properties: maxItems: 1 memory-region: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: phandle to a node describing reserved memory (System RAM memory) The M core can't access all the DDR memory space on some platform, diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml index d09c6355e22d..51c7622dc20b 100644 --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -72,7 +72,7 @@ examples: mux-controls = <&mux>; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/Documentation/driver-api/usb/usb.rst b/Documentation/driver-api/usb/usb.rst index 820e867af45a..2c94ff2f4385 100644 --- a/Documentation/driver-api/usb/usb.rst +++ b/Documentation/driver-api/usb/usb.rst @@ -123,6 +123,8 @@ are in ``drivers/usb/common/common.c``. In addition, some functions useful for creating debugging output are defined in ``drivers/usb/common/debug.c``. +.. _usb_header: + Host-Side Data Types and Macros =============================== diff --git a/Documentation/powerpc/syscall64-abi.rst b/Documentation/powerpc/syscall64-abi.rst index dabee3729e5a..56490c4c0c07 100644 --- a/Documentation/powerpc/syscall64-abi.rst +++ b/Documentation/powerpc/syscall64-abi.rst @@ -109,6 +109,16 @@ auxiliary vector. scv 0 syscalls will always behave as PPC_FEATURE2_HTM_NOSC. +ptrace +------ +When ptracing system calls (PTRACE_SYSCALL), the pt_regs.trap value contains +the system call type that can be used to distinguish between sc and scv 0 +system calls, and the different register conventions can be accounted for. + +If the value of (pt_regs.trap & 0xfff0) is 0xc00 then the system call was +performed with the sc instruction, if it is 0x3000 then the system call was +performed with the scv 0 instruction. + vsyscall ======== diff --git a/Documentation/userspace-api/seccomp_filter.rst b/Documentation/userspace-api/seccomp_filter.rst index bd9165241b6c..6efb41cc8072 100644 --- a/Documentation/userspace-api/seccomp_filter.rst +++ b/Documentation/userspace-api/seccomp_filter.rst @@ -250,14 +250,14 @@ Users can read via ``ioctl(SECCOMP_IOCTL_NOTIF_RECV)`` (or ``poll()``) on a seccomp notification fd to receive a ``struct seccomp_notif``, which contains five members: the input length of the structure, a unique-per-filter ``id``, the ``pid`` of the task which triggered this request (which may be 0 if the -task is in a pid ns not visible from the listener's pid namespace), a ``flags`` -member which for now only has ``SECCOMP_NOTIF_FLAG_SIGNALED``, representing -whether or not the notification is a result of a non-fatal signal, and the -``data`` passed to seccomp. Userspace can then make a decision based on this -information about what to do, and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a -response, indicating what should be returned to userspace. The ``id`` member of -``struct seccomp_notif_resp`` should be the same ``id`` as in ``struct -seccomp_notif``. +task is in a pid ns not visible from the listener's pid namespace). The +notification also contains the ``data`` passed to seccomp, and a filters flag. +The structure should be zeroed out prior to calling the ioctl. + +Userspace can then make a decision based on this information about what to do, +and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a response, indicating what should be +returned to userspace. The ``id`` member of ``struct seccomp_notif_resp`` should +be the same ``id`` as in ``struct seccomp_notif``. It is worth noting that ``struct seccomp_data`` contains the values of register arguments to the syscall, but does not contain pointers to memory. The task's diff --git a/Documentation/virt/kvm/vcpu-requests.rst b/Documentation/virt/kvm/vcpu-requests.rst index 5feb3706a7ae..af1b37441e0a 100644 --- a/Documentation/virt/kvm/vcpu-requests.rst +++ b/Documentation/virt/kvm/vcpu-requests.rst @@ -118,10 +118,12 @@ KVM_REQ_MMU_RELOAD necessary to inform each VCPU to completely refresh the tables. This request is used for that. -KVM_REQ_PENDING_TIMER +KVM_REQ_UNBLOCK - This request may be made from a timer handler run on the host on behalf - of a VCPU. It informs the VCPU thread to inject a timer interrupt. + This request informs the vCPU to exit kvm_vcpu_block. It is used for + example from timer handlers that run on the host on behalf of a vCPU, + or in order to update the interrupt routing and ensure that assigned + devices will wake up the vCPU. KVM_REQ_UNHALT |