summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/Makefile3
-rw-r--r--Documentation/video4linux/Makefile1
-rw-r--r--Documentation/video4linux/v4l2-framework.txt2
-rw-r--r--Documentation/video4linux/v4l2-pci-skeleton.c923
4 files changed, 2 insertions, 927 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile
index 13b5ae1b87aa..de955e151af8 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -1,4 +1,3 @@
subdir-y := accounting auxdisplay blackfin \
filesystems filesystems ia64 laptops mic misc-devices \
- networking pcmcia prctl ptp timers vDSO video4linux \
- watchdog
+ networking pcmcia prctl ptp timers vDSO watchdog
diff --git a/Documentation/video4linux/Makefile b/Documentation/video4linux/Makefile
deleted file mode 100644
index 65a351d75c95..000000000000
--- a/Documentation/video4linux/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_VIDEO_PCI_SKELETON) := v4l2-pci-skeleton.o
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index fa41608ab2b4..cbefc7902f5f 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -35,7 +35,7 @@ need and this same framework should make it much easier to refactor
common code into utility functions shared by all drivers.
A good example to look at as a reference is the v4l2-pci-skeleton.c
-source that is available in this directory. It is a skeleton driver for
+source that is available in samples/v4l/. It is a skeleton driver for
a PCI capture card, and demonstrates how to use the V4L2 driver
framework. It can be used as a template for real PCI video capture driver.
diff --git a/Documentation/video4linux/v4l2-pci-skeleton.c b/Documentation/video4linux/v4l2-pci-skeleton.c
deleted file mode 100644
index 79af0c041056..000000000000
--- a/Documentation/video4linux/v4l2-pci-skeleton.c
+++ /dev/null
@@ -1,923 +0,0 @@
-/*
- * This is a V4L2 PCI Skeleton Driver. It gives an initial skeleton source
- * for use with other PCI drivers.
- *
- * This skeleton PCI driver assumes that the card has an S-Video connector as
- * input 0 and an HDMI connector as input 1.
- *
- * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- *
- * This program is free software; you may redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kmod.h>
-#include <linux/mutex.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/videodev2.h>
-#include <linux/v4l2-dv-timings.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-dev.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-dv-timings.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-event.h>
-#include <media/videobuf2-v4l2.h>
-#include <media/videobuf2-dma-contig.h>
-
-MODULE_DESCRIPTION("V4L2 PCI Skeleton Driver");
-MODULE_AUTHOR("Hans Verkuil");
-MODULE_LICENSE("GPL v2");
-
-/**
- * struct skeleton - All internal data for one instance of device
- * @pdev: PCI device
- * @v4l2_dev: top-level v4l2 device struct
- * @vdev: video node structure
- * @ctrl_handler: control handler structure
- * @lock: ioctl serialization mutex
- * @std: current SDTV standard
- * @timings: current HDTV timings
- * @format: current pix format
- * @input: current video input (0 = SDTV, 1 = HDTV)
- * @queue: vb2 video capture queue
- * @alloc_ctx: vb2 contiguous DMA context
- * @qlock: spinlock controlling access to buf_list and sequence
- * @buf_list: list of buffers queued for DMA
- * @sequence: frame sequence counter
- */
-struct skeleton {
- struct pci_dev *pdev;
- struct v4l2_device v4l2_dev;
- struct video_device vdev;
- struct v4l2_ctrl_handler ctrl_handler;
- struct mutex lock;
- v4l2_std_id std;
- struct v4l2_dv_timings timings;
- struct v4l2_pix_format format;
- unsigned input;
-
- struct vb2_queue queue;
- struct vb2_alloc_ctx *alloc_ctx;
-
- spinlock_t qlock;
- struct list_head buf_list;
- unsigned field;
- unsigned sequence;
-};
-
-struct skel_buffer {
- struct vb2_buffer vb;
- struct list_head list;
-};
-
-static inline struct skel_buffer *to_skel_buffer(struct vb2_buffer *vb2)
-{
- return container_of(vb2, struct skel_buffer, vb);
-}
-
-static const struct pci_device_id skeleton_pci_tbl[] = {
- /* { PCI_DEVICE(PCI_VENDOR_ID_, PCI_DEVICE_ID_) }, */
- { 0, }
-};
-MODULE_DEVICE_TABLE(pci, skeleton_pci_tbl);
-
-/*
- * HDTV: this structure has the capabilities of the HDTV receiver.
- * It is used to constrain the huge list of possible formats based
- * upon the hardware capabilities.
- */
-static const struct v4l2_dv_timings_cap skel_timings_cap = {
- .type = V4L2_DV_BT_656_1120,
- /* keep this initialization for compatibility with GCC < 4.4.6 */
- .reserved = { 0 },
- V4L2_INIT_BT_TIMINGS(
- 720, 1920, /* min/max width */
- 480, 1080, /* min/max height */
- 27000000, 74250000, /* min/max pixelclock*/
- V4L2_DV_BT_STD_CEA861, /* Supported standards */
- /* capabilities */
- V4L2_DV_BT_CAP_INTERLACED | V4L2_DV_BT_CAP_PROGRESSIVE
- )
-};
-
-/*
- * Supported SDTV standards. This does the same job as skel_timings_cap, but
- * for standard TV formats.
- */
-#define SKEL_TVNORMS V4L2_STD_ALL
-
-/*
- * Interrupt handler: typically interrupts happen after a new frame has been
- * captured. It is the job of the handler to remove the new frame from the
- * internal list and give it back to the vb2 framework, updating the sequence
- * counter, field and timestamp at the same time.
- */
-static irqreturn_t skeleton_irq(int irq, void *dev_id)
-{
-#ifdef TODO
- struct skeleton *skel = dev_id;
-
- /* handle interrupt */
-
- /* Once a new frame has been captured, mark it as done like this: */
- if (captured_new_frame) {
- ...
- spin_lock(&skel->qlock);
- list_del(&new_buf->list);
- spin_unlock(&skel->qlock);
- v4l2_get_timestamp(&new_buf->vb.v4l2_buf.timestamp);
- new_buf->vb.v4l2_buf.sequence = skel->sequence++;
- new_buf->vb.v4l2_buf.field = skel->field;
- if (skel->format.field == V4L2_FIELD_ALTERNATE) {
- if (skel->field == V4L2_FIELD_BOTTOM)
- skel->field = V4L2_FIELD_TOP;
- else if (skel->field == V4L2_FIELD_TOP)
- skel->field = V4L2_FIELD_BOTTOM;
- }
- vb2_buffer_done(&new_buf->vb, VB2_BUF_STATE_DONE);
- }
-#endif
- return IRQ_HANDLED;
-}
-
-/*
- * Setup the constraints of the queue: besides setting the number of planes
- * per buffer and the size and allocation context of each plane, it also
- * checks if sufficient buffers have been allocated. Usually 3 is a good
- * minimum number: many DMA engines need a minimum of 2 buffers in the
- * queue and you need to have another available for userspace processing.
- */
-static int queue_setup(struct vb2_queue *vq,
- unsigned int *nbuffers, unsigned int *nplanes,
- unsigned int sizes[], void *alloc_ctxs[])
-{
- struct skeleton *skel = vb2_get_drv_priv(vq);
-
- skel->field = skel->format.field;
- if (skel->field == V4L2_FIELD_ALTERNATE) {
- /*
- * You cannot use read() with FIELD_ALTERNATE since the field
- * information (TOP/BOTTOM) cannot be passed back to the user.
- */
- if (vb2_fileio_is_active(vq))
- return -EINVAL;
- skel->field = V4L2_FIELD_TOP;
- }
-
- if (vq->num_buffers + *nbuffers < 3)
- *nbuffers = 3 - vq->num_buffers;
- alloc_ctxs[0] = skel->alloc_ctx;
-
- if (*nplanes)
- return sizes[0] < skel->format.sizeimage ? -EINVAL : 0;
- *nplanes = 1;
- sizes[0] = skel->format.sizeimage;
- return 0;
-}
-
-/*
- * Prepare the buffer for queueing to the DMA engine: check and set the
- * payload size.
- */
-static int buffer_prepare(struct vb2_buffer *vb)
-{
- struct skeleton *skel = vb2_get_drv_priv(vb->vb2_queue);
- unsigned long size = skel->format.sizeimage;
-
- if (vb2_plane_size(vb, 0) < size) {
- dev_err(&skel->pdev->dev, "buffer too small (%lu < %lu)\n",
- vb2_plane_size(vb, 0), size);
- return -EINVAL;
- }
-
- vb2_set_plane_payload(vb, 0, size);
- return 0;
-}
-
-/*
- * Queue this buffer to the DMA engine.
- */
-static void buffer_queue(struct vb2_buffer *vb)
-{
- struct skeleton *skel = vb2_get_drv_priv(vb->vb2_queue);
- struct skel_buffer *buf = to_skel_buffer(vb);
- unsigned long flags;
-
- spin_lock_irqsave(&skel->qlock, flags);
- list_add_tail(&buf->list, &skel->buf_list);
-
- /* TODO: Update any DMA pointers if necessary */
-
- spin_unlock_irqrestore(&skel->qlock, flags);
-}
-
-static void return_all_buffers(struct skeleton *skel,
- enum vb2_buffer_state state)
-{
- struct skel_buffer *buf, *node;
- unsigned long flags;
-
- spin_lock_irqsave(&skel->qlock, flags);
- list_for_each_entry_safe(buf, node, &skel->buf_list, list) {
- vb2_buffer_done(&buf->vb, state);
- list_del(&buf->list);
- }
- spin_unlock_irqrestore(&skel->qlock, flags);
-}
-
-/*
- * Start streaming. First check if the minimum number of buffers have been
- * queued. If not, then return -ENOBUFS and the vb2 framework will call
- * this function again the next time a buffer has been queued until enough
- * buffers are available to actually start the DMA engine.
- */
-static int start_streaming(struct vb2_queue *vq, unsigned int count)
-{
- struct skeleton *skel = vb2_get_drv_priv(vq);
- int ret = 0;
-
- skel->sequence = 0;
-
- /* TODO: start DMA */
-
- if (ret) {
- /*
- * In case of an error, return all active buffers to the
- * QUEUED state
- */
- return_all_buffers(skel, VB2_BUF_STATE_QUEUED);
- }
- return ret;
-}
-
-/*
- * Stop the DMA engine. Any remaining buffers in the DMA queue are dequeued
- * and passed on to the vb2 framework marked as STATE_ERROR.
- */
-static void stop_streaming(struct vb2_queue *vq)
-{
- struct skeleton *skel = vb2_get_drv_priv(vq);
-
- /* TODO: stop DMA */
-
- /* Release all active buffers */
- return_all_buffers(skel, VB2_BUF_STATE_ERROR);
-}
-
-/*
- * The vb2 queue ops. Note that since q->lock is set we can use the standard
- * vb2_ops_wait_prepare/finish helper functions. If q->lock would be NULL,
- * then this driver would have to provide these ops.
- */
-static struct vb2_ops skel_qops = {
- .queue_setup = queue_setup,
- .buf_prepare = buffer_prepare,
- .buf_queue = buffer_queue,
- .start_streaming = start_streaming,
- .stop_streaming = stop_streaming,
- .wait_prepare = vb2_ops_wait_prepare,
- .wait_finish = vb2_ops_wait_finish,
-};
-
-/*
- * Required ioctl querycap. Note that the version field is prefilled with
- * the version of the kernel.
- */
-static int skeleton_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
-{
- struct skeleton *skel = video_drvdata(file);
-
- strlcpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
- strlcpy(cap->card, "V4L2 PCI Skeleton", sizeof(cap->card));
- snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
- pci_name(skel->pdev));
- cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING;
- cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
- return 0;
-}
-
-/*
- * Helper function to check and correct struct v4l2_pix_format. It's used
- * not only in VIDIOC_TRY/S_FMT, but also elsewhere if changes to the SDTV
- * standard, HDTV timings or the video input would require updating the
- * current format.
- */
-static void skeleton_fill_pix_format(struct skeleton *skel,
- struct v4l2_pix_format *pix)
-{
- pix->pixelformat = V4L2_PIX_FMT_YUYV;
- if (skel->input == 0) {
- /* S-Video input */
- pix->width = 720;
- pix->height = (skel->std & V4L2_STD_525_60) ? 480 : 576;
- pix->field = V4L2_FIELD_INTERLACED;
- pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
- } else {
- /* HDMI input */
- pix->width = skel->timings.bt.width;
- pix->height = skel->timings.bt.height;
- if (skel->timings.bt.interlaced) {
- pix->field = V4L2_FIELD_ALTERNATE;
- pix->height /= 2;
- } else {
- pix->field = V4L2_FIELD_NONE;
- }
- pix->colorspace = V4L2_COLORSPACE_REC709;
- }
-
- /*
- * The YUYV format is four bytes for every two pixels, so bytesperline
- * is width * 2.
- */
- pix->bytesperline = pix->width * 2;
- pix->sizeimage = pix->bytesperline * pix->height;
- pix->priv = 0;
-}
-
-static int skeleton_try_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct skeleton *skel = video_drvdata(file);
- struct v4l2_pix_format *pix = &f->fmt.pix;
-
- /*
- * Due to historical reasons providing try_fmt with an unsupported
- * pixelformat will return -EINVAL for video receivers. Webcam drivers,
- * however, will silently correct the pixelformat. Some video capture
- * applications rely on this behavior...
- */
- if (pix->pixelformat != V4L2_PIX_FMT_YUYV)
- return -EINVAL;
- skeleton_fill_pix_format(skel, pix);
- return 0;
-}
-
-static int skeleton_s_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct skeleton *skel = video_drvdata(file);
- int ret;
-
- ret = skeleton_try_fmt_vid_cap(file, priv, f);
- if (ret)
- return ret;
-
- /*
- * It is not allowed to change the format while buffers for use with
- * streaming have already been allocated.
- */
- if (vb2_is_busy(&skel->queue))
- return -EBUSY;
-
- /* TODO: change format */
- skel->format = f->fmt.pix;
- return 0;
-}
-
-static int skeleton_g_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct skeleton *skel = video_drvdata(file);
-
- f->fmt.pix = skel->format;
- return 0;
-}
-
-static int skeleton_enum_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_fmtdesc *f)
-{
- if (f->index != 0)
- return -EINVAL;
-
- f->pixelformat = V4L2_PIX_FMT_YUYV;
- return 0;
-}
-
-static int skeleton_s_std(struct file *file, void *priv, v4l2_std_id std)
-{
- struct skeleton *skel = video_drvdata(file);
-
- /* S_STD is not supported on the HDMI input */
- if (skel->input)
- return -ENODATA;
-
- /*
- * No change, so just return. Some applications call S_STD again after
- * the buffers for streaming have been set up, so we have to allow for
- * this behavior.
- */
- if (std == skel->std)
- return 0;
-
- /*
- * Changing the standard implies a format change, which is not allowed
- * while buffers for use with streaming have already been allocated.
- */
- if (vb2_is_busy(&skel->queue))
- return -EBUSY;
-
- /* TODO: handle changing std */
-
- skel->std = std;
-
- /* Update the internal format */
- skeleton_fill_pix_format(skel, &skel->format);
- return 0;
-}
-
-static int skeleton_g_std(struct file *file, void *priv, v4l2_std_id *std)
-{
- struct skeleton *skel = video_drvdata(file);
-
- /* G_STD is not supported on the HDMI input */
- if (skel->input)
- return -ENODATA;
-
- *std = skel->std;
- return 0;
-}
-
-/*
- * Query the current standard as seen by the hardware. This function shall
- * never actually change the standard, it just detects and reports.
- * The framework will initially set *std to tvnorms (i.e. the set of
- * supported standards by this input), and this function should just AND
- * this value. If there is no signal, then *std should be set to 0.
- */
-static int skeleton_querystd(struct file *file, void *priv, v4l2_std_id *std)
-{
- struct skeleton *skel = video_drvdata(file);
-
- /* QUERY_STD is not supported on the HDMI input */
- if (skel->input)
- return -ENODATA;
-
-#ifdef TODO
- /*
- * Query currently seen standard. Initial value of *std is
- * V4L2_STD_ALL. This function should look something like this:
- */
- get_signal_info();
- if (no_signal) {
- *std = 0;
- return 0;
- }
- /* Use signal information to reduce the number of possible standards */
- if (signal_has_525_lines)
- *std &= V4L2_STD_525_60;
- else
- *std &= V4L2_STD_625_50;
-#endif
- return 0;
-}
-
-static int skeleton_s_dv_timings(struct file *file, void *_fh,
- struct v4l2_dv_timings *timings)
-{
- struct skeleton *skel = video_drvdata(file);
-
- /* S_DV_TIMINGS is not supported on the S-Video input */
- if (skel->input == 0)
- return -ENODATA;
-
- /* Quick sanity check */
- if (!v4l2_valid_dv_timings(timings, &skel_timings_cap, NULL, NULL))
- return -EINVAL;
-
- /* Check if the timings are part of the CEA-861 timings. */
- if (!v4l2_find_dv_timings_cap(timings, &skel_timings_cap,
- 0, NULL, NULL))
- return -EINVAL;
-
- /* Return 0 if the new timings are the same as the current timings. */
- if (v4l2_match_dv_timings(timings, &skel->timings, 0, false))
- return 0;
-
- /*
- * Changing the timings implies a format change, which is not allowed
- * while buffers for use with streaming have already been allocated.
- */
- if (vb2_is_busy(&skel->queue))
- return -EBUSY;
-
- /* TODO: Configure new timings */
-
- /* Save timings */
- skel->timings = *timings;
-
- /* Update the internal format */
- skeleton_fill_pix_format(skel, &skel->format);
- return 0;
-}
-
-static int skeleton_g_dv_timings(struct file *file, void *_fh,
- struct v4l2_dv_timings *timings)
-{
- struct skeleton *skel = video_drvdata(file);
-
- /* G_DV_TIMINGS is not supported on the S-Video input */
- if (skel->input == 0)
- return -ENODATA;
-
- *timings = skel->timings;
- return 0;
-}
-
-static int skeleton_enum_dv_timings(struct file *file, void *_fh,
- struct v4l2_enum_dv_timings *timings)
-{
- struct skeleton *skel = video_drvdata(file);
-
- /* ENUM_DV_TIMINGS is not supported on the S-Video input */
- if (skel->input == 0)
- return -ENODATA;
-
- return v4l2_enum_dv_timings_cap(timings, &skel_timings_cap,
- NULL, NULL);
-}
-
-/*
- * Query the current timings as seen by the hardware. This function shall
- * never actually change the timings, it just detects and reports.
- * If no signal is detected, then return -ENOLINK. If the hardware cannot
- * lock to the signal, then return -ENOLCK. If the signal is out of range
- * of the capabilities of the system (e.g., it is possible that the receiver
- * can lock but that the DMA engine it is connected to cannot handle
- * pixelclocks above a certain frequency), then -ERANGE is returned.
- */
-static int skeleton_query_dv_timings(struct file *file, void *_fh,
- struct v4l2_dv_timings *timings)
-{
- struct skeleton *skel = video_drvdata(file);
-
- /* QUERY_DV_TIMINGS is not supported on the S-Video input */
- if (skel->input == 0)
- return -ENODATA;
-
-#ifdef TODO
- /*
- * Query currently seen timings. This function should look
- * something like this:
- */
- detect_timings();
- if (no_signal)
- return -ENOLINK;
- if (cannot_lock_to_signal)
- return -ENOLCK;
- if (signal_out_of_range_of_capabilities)
- return -ERANGE;
-
- /* Useful for debugging */
- v4l2_print_dv_timings(skel->v4l2_dev.name, "query_dv_timings:",
- timings, true);
-#endif
- return 0;
-}
-
-static int skeleton_dv_timings_cap(struct file *file, void *fh,
- struct v4l2_dv_timings_cap *cap)
-{
- struct skeleton *skel = video_drvdata(file);
-
- /* DV_TIMINGS_CAP is not supported on the S-Video input */
- if (skel->input == 0)
- return -ENODATA;
- *cap = skel_timings_cap;
- return 0;
-}
-
-static int skeleton_enum_input(struct file *file, void *priv,
- struct v4l2_input *i)
-{
- if (i->index > 1)
- return -EINVAL;
-
- i->type = V4L2_INPUT_TYPE_CAMERA;
- if (i->index == 0) {
- i->std = SKEL_TVNORMS;
- strlcpy(i->name, "S-Video", sizeof(i->name));
- i->capabilities = V4L2_IN_CAP_STD;
- } else {
- i->std = 0;
- strlcpy(i->name, "HDMI", sizeof(i->name));
- i->capabilities = V4L2_IN_CAP_DV_TIMINGS;
- }
- return 0;
-}
-
-static int skeleton_s_input(struct file *file, void *priv, unsigned int i)
-{
- struct skeleton *skel = video_drvdata(file);
-
- if (i > 1)
- return -EINVAL;
-
- /*
- * Changing the input implies a format change, which is not allowed
- * while buffers for use with streaming have already been allocated.
- */
- if (vb2_is_busy(&skel->queue))
- return -EBUSY;
-
- skel->input = i;
- /*
- * Update tvnorms. The tvnorms value is used by the core to implement
- * VIDIOC_ENUMSTD so it has to be correct. If tvnorms == 0, then
- * ENUMSTD will return -ENODATA.
- */
- skel->vdev.tvnorms = i ? 0 : SKEL_TVNORMS;
-
- /* Update the internal format */
- skeleton_fill_pix_format(skel, &skel->format);
- return 0;
-}
-
-static int skeleton_g_input(struct file *file, void *priv, unsigned int *i)
-{
- struct skeleton *skel = video_drvdata(file);
-
- *i = skel->input;
- return 0;
-}
-
-/* The control handler. */
-static int skeleton_s_ctrl(struct v4l2_ctrl *ctrl)
-{
- /*struct skeleton *skel =
- container_of(ctrl->handler, struct skeleton, ctrl_handler);*/
-
- switch (ctrl->id) {
- case V4L2_CID_BRIGHTNESS:
- /* TODO: set brightness to ctrl->val */
- break;
- case V4L2_CID_CONTRAST:
- /* TODO: set contrast to ctrl->val */
- break;
- case V4L2_CID_SATURATION:
- /* TODO: set saturation to ctrl->val */
- break;
- case V4L2_CID_HUE:
- /* TODO: set hue to ctrl->val */
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-/* ------------------------------------------------------------------
- File operations for the device
- ------------------------------------------------------------------*/
-
-static const struct v4l2_ctrl_ops skel_ctrl_ops = {
- .s_ctrl = skeleton_s_ctrl,
-};
-
-/*
- * The set of all supported ioctls. Note that all the streaming ioctls
- * use the vb2 helper functions that take care of all the locking and
- * that also do ownership tracking (i.e. only the filehandle that requested
- * the buffers can call the streaming ioctls, all other filehandles will
- * receive -EBUSY if they attempt to call the same streaming ioctls).
- *
- * The last three ioctls also use standard helper functions: these implement
- * standard behavior for drivers with controls.
- */
-static const struct v4l2_ioctl_ops skel_ioctl_ops = {
- .vidioc_querycap = skeleton_querycap,
- .vidioc_try_fmt_vid_cap = skeleton_try_fmt_vid_cap,
- .vidioc_s_fmt_vid_cap = skeleton_s_fmt_vid_cap,
- .vidioc_g_fmt_vid_cap = skeleton_g_fmt_vid_cap,
- .vidioc_enum_fmt_vid_cap = skeleton_enum_fmt_vid_cap,
-
- .vidioc_g_std = skeleton_g_std,
- .vidioc_s_std = skeleton_s_std,
- .vidioc_querystd = skeleton_querystd,
-
- .vidioc_s_dv_timings = skeleton_s_dv_timings,
- .vidioc_g_dv_timings = skeleton_g_dv_timings,
- .vidioc_enum_dv_timings = skeleton_enum_dv_timings,
- .vidioc_query_dv_timings = skeleton_query_dv_timings,
- .vidioc_dv_timings_cap = skeleton_dv_timings_cap,
-
- .vidioc_enum_input = skeleton_enum_input,
- .vidioc_g_input = skeleton_g_input,
- .vidioc_s_input = skeleton_s_input,
-
- .vidioc_reqbufs = vb2_ioctl_reqbufs,
- .vidioc_create_bufs = vb2_ioctl_create_bufs,
- .vidioc_querybuf = vb2_ioctl_querybuf,
- .vidioc_qbuf = vb2_ioctl_qbuf,
- .vidioc_dqbuf = vb2_ioctl_dqbuf,
- .vidioc_expbuf = vb2_ioctl_expbuf,
- .vidioc_streamon = vb2_ioctl_streamon,
- .vidioc_streamoff = vb2_ioctl_streamoff,
-
- .vidioc_log_status = v4l2_ctrl_log_status,
- .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
- .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
-};
-
-/*
- * The set of file operations. Note that all these ops are standard core
- * helper functions.
- */
-static const struct v4l2_file_operations skel_fops = {
- .owner = THIS_MODULE,
- .open = v4l2_fh_open,
- .release = vb2_fop_release,
- .unlocked_ioctl = video_ioctl2,
- .read = vb2_fop_read,
- .mmap = vb2_fop_mmap,
- .poll = vb2_fop_poll,
-};
-
-/*
- * The initial setup of this device instance. Note that the initial state of
- * the driver should be complete. So the initial format, standard, timings
- * and video input should all be initialized to some reasonable value.
- */
-static int skeleton_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- /* The initial timings are chosen to be 720p60. */
- static const struct v4l2_dv_timings timings_def =
- V4L2_DV_BT_CEA_1280X720P60;
- struct skeleton *skel;
- struct video_device *vdev;
- struct v4l2_ctrl_handler *hdl;
- struct vb2_queue *q;
- int ret;
-
- /* Enable PCI */
- ret = pci_enable_device(pdev);
- if (ret)
- return ret;
- ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (ret) {
- dev_err(&pdev->dev, "no suitable DMA available.\n");
- goto disable_pci;
- }
-
- /* Allocate a new instance */
- skel = devm_kzalloc(&pdev->dev, sizeof(struct skeleton), GFP_KERNEL);
- if (!skel)
- return -ENOMEM;
-
- /* Allocate the interrupt */
- ret = devm_request_irq(&pdev->dev, pdev->irq,
- skeleton_irq, 0, KBUILD_MODNAME, skel);
- if (ret) {
- dev_err(&pdev->dev, "request_irq failed\n");
- goto disable_pci;
- }
- skel->pdev = pdev;
-
- /* Fill in the initial format-related settings */
- skel->timings = timings_def;
- skel->std = V4L2_STD_625_50;
- skeleton_fill_pix_format(skel, &skel->format);
-
- /* Initialize the top-level structure */
- ret = v4l2_device_register(&pdev->dev, &skel->v4l2_dev);
- if (ret)
- goto disable_pci;
-
- mutex_init(&skel->lock);
-
- /* Add the controls */
- hdl = &skel->ctrl_handler;
- v4l2_ctrl_handler_init(hdl, 4);
- v4l2_ctrl_new_std(hdl, &skel_ctrl_ops,
- V4L2_CID_BRIGHTNESS, 0, 255, 1, 127);
- v4l2_ctrl_new_std(hdl, &skel_ctrl_ops,
- V4L2_CID_CONTRAST, 0, 255, 1, 16);
- v4l2_ctrl_new_std(hdl, &skel_ctrl_ops,
- V4L2_CID_SATURATION, 0, 255, 1, 127);
- v4l2_ctrl_new_std(hdl, &skel_ctrl_ops,
- V4L2_CID_HUE, -128, 127, 1, 0);
- if (hdl->error) {
- ret = hdl->error;
- goto free_hdl;
- }
- skel->v4l2_dev.ctrl_handler = hdl;
-
- /* Initialize the vb2 queue */
- q = &skel->queue;
- q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
- q->drv_priv = skel;
- q->buf_struct_size = sizeof(struct skel_buffer);
- q->ops = &skel_qops;
- q->mem_ops = &vb2_dma_contig_memops;
- q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
- /*
- * Assume that this DMA engine needs to have at least two buffers
- * available before it can be started. The start_streaming() op
- * won't be called until at least this many buffers are queued up.
- */
- q->min_buffers_needed = 2;
- /*
- * The serialization lock for the streaming ioctls. This is the same
- * as the main serialization lock, but if some of the non-streaming
- * ioctls could take a long time to execute, then you might want to
- * have a different lock here to prevent VIDIOC_DQBUF from being
- * blocked while waiting for another action to finish. This is
- * generally not needed for PCI devices, but USB devices usually do
- * want a separate lock here.
- */
- q->lock = &skel->lock;
- /*
- * Since this driver can only do 32-bit DMA we must make sure that
- * the vb2 core will allocate the buffers in 32-bit DMA memory.
- */
- q->gfp_flags = GFP_DMA32;
- ret = vb2_queue_init(q);
- if (ret)
- goto free_hdl;
-
- skel->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
- if (IS_ERR(skel->alloc_ctx)) {
- dev_err(&pdev->dev, "Can't allocate buffer context");
- ret = PTR_ERR(skel->alloc_ctx);
- goto free_hdl;
- }
- INIT_LIST_HEAD(&skel->buf_list);
- spin_lock_init(&skel->qlock);
-
- /* Initialize the video_device structure */
- vdev = &skel->vdev;
- strlcpy(vdev->name, KBUILD_MODNAME, sizeof(vdev->name));
- /*
- * There is nothing to clean up, so release is set to an empty release
- * function. The release callback must be non-NULL.
- */
- vdev->release = video_device_release_empty;
- vdev->fops = &skel_fops,
- vdev->ioctl_ops = &skel_ioctl_ops,
- /*
- * The main serialization lock. All ioctls are serialized by this
- * lock. Exception: if q->lock is set, then the streaming ioctls
- * are serialized by that separate lock.
- */
- vdev->lock = &skel->lock;
- vdev->queue = q;
- vdev->v4l2_dev = &skel->v4l2_dev;
- /* Supported SDTV standards, if any */
- vdev->tvnorms = SKEL_TVNORMS;
- video_set_drvdata(vdev, skel);
-
- ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
- if (ret)
- goto free_ctx;
-
- dev_info(&pdev->dev, "V4L2 PCI Skeleton Driver loaded\n");
- return 0;
-
-free_ctx:
- vb2_dma_contig_cleanup_ctx(skel->alloc_ctx);
-free_hdl:
- v4l2_ctrl_handler_free(&skel->ctrl_handler);
- v4l2_device_unregister(&skel->v4l2_dev);
-disable_pci:
- pci_disable_device(pdev);
- return ret;
-}
-
-static void skeleton_remove(struct pci_dev *pdev)
-{
- struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
- struct skeleton *skel = container_of(v4l2_dev, struct skeleton, v4l2_dev);
-
- video_unregister_device(&skel->vdev);
- v4l2_ctrl_handler_free(&skel->ctrl_handler);
- vb2_dma_contig_cleanup_ctx(skel->alloc_ctx);
- v4l2_device_unregister(&skel->v4l2_dev);
- pci_disable_device(skel->pdev);
-}
-
-static struct pci_driver skeleton_driver = {
- .name = KBUILD_MODNAME,
- .probe = skeleton_probe,
- .remove = skeleton_remove,
- .id_table = skeleton_pci_tbl,
-};
-
-module_pci_driver(skeleton_driver);