diff options
Diffstat (limited to 'Documentation')
33 files changed, 254 insertions, 113 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index 8ca498447aeb..05601a90a9b6 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -29,13 +29,13 @@ Description: This file shows the system fans direction: The files are read only. -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version Date: November 2018 KernelVersion: 5.0 Contact: Vadim Pasternak <vadimpmellanox.com> Description: These files show with which CPLD versions have been burned - on LED board. + on LED or Gearbox board. The files are read only. @@ -121,6 +121,15 @@ Description: These files show the system reset cause, as following: ComEx The files are read only. +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version +Date: November 2018 +KernelVersion: 5.0 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show with which CPLD versions have been burned + on LED board. + + The files are read only. + Date: June 2019 KernelVersion: 5.3 Contact: Vadim Pasternak <vadimpmellanox.com> diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl index c65a80574869..401d202f478b 100644 --- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl @@ -1,4 +1,4 @@ -What: /sys/bus/platform/devices/MLNXBF04:00/driver/lifecycle_state +What: /sys/bus/platform/devices/MLNXBF04:00/lifecycle_state Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" @@ -10,7 +10,7 @@ Description: GA Non-Secured - Non-Secure chip and not able to change state RMA - Return Merchandise Authorization -What: /sys/bus/platform/devices/MLNXBF04:00/driver/post_reset_wdog +What: /sys/bus/platform/devices/MLNXBF04:00/post_reset_wdog Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" @@ -19,7 +19,7 @@ Description: to reboot the chip and recover it to the old state if the new boot partition fails. -What: /sys/bus/platform/devices/MLNXBF04:00/driver/reset_action +What: /sys/bus/platform/devices/MLNXBF04:00/reset_action Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" @@ -30,7 +30,7 @@ Description: emmc - boot from the onchip eMMC emmc_legacy - boot from the onchip eMMC in legacy (slow) mode -What: /sys/bus/platform/devices/MLNXBF04:00/driver/second_reset_action +What: /sys/bus/platform/devices/MLNXBF04:00/second_reset_action Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" @@ -44,7 +44,7 @@ Description: swap_emmc - swap the primary / secondary boot partition none - cancel the action -What: /sys/bus/platform/devices/MLNXBF04:00/driver/secure_boot_fuse_state +What: /sys/bus/platform/devices/MLNXBF04:00/secure_boot_fuse_state Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt index 1c5d2281efc9..2a97aaec8b12 100644 --- a/Documentation/admin-guide/devices.txt +++ b/Documentation/admin-guide/devices.txt @@ -319,7 +319,7 @@ 182 = /dev/perfctr Performance-monitoring counters 183 = /dev/hwrng Generic random number generator 184 = /dev/cpu/microcode CPU microcode update interface - 186 = /dev/atomicps Atomic shapshot of process state data + 186 = /dev/atomicps Atomic snapshot of process state data 187 = /dev/irnet IrNET device 188 = /dev/smbusbios SMBus BIOS 189 = /dev/ussp_ctl User space serial port control diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst index 059ddcbe769d..9bc93f0ce0c9 100644 --- a/Documentation/admin-guide/ext4.rst +++ b/Documentation/admin-guide/ext4.rst @@ -181,14 +181,17 @@ When mounting an ext4 filesystem, the following option are accepted: system after its metadata has been committed to the journal. commit=nrsec (*) - Ext4 can be told to sync all its data and metadata every 'nrsec' - seconds. The default value is 5 seconds. This means that if you lose - your power, you will lose as much as the latest 5 seconds of work (your - filesystem will not be damaged though, thanks to the journaling). This - default value (or any low value) will hurt performance, but it's good - for data-safety. Setting it to 0 will have the same effect as leaving - it at the default (5 seconds). Setting it to very large values will - improve performance. + This setting limits the maximum age of the running transaction to + 'nrsec' seconds. The default value is 5 seconds. This means that if + you lose your power, you will lose as much as the latest 5 seconds of + metadata changes (your filesystem will not be damaged though, thanks + to the journaling). This default value (or any low value) will hurt + performance, but it's good for data-safety. Setting it to 0 will have + the same effect as leaving it at the default (5 seconds). Setting it + to very large values will improve performance. Note that due to + delayed allocation even older data can be lost on power failure since + writeback of those data begins only after time set in + /proc/sys/vm/dirty_expire_centisecs. barrier=<0|1(*)>, barrier(*), nobarrier This enables/disables the use of write barriers in the jbd code. diff --git a/Documentation/admin-guide/xfs.rst b/Documentation/admin-guide/xfs.rst index fb5b39f73059..ad911be5b5e9 100644 --- a/Documentation/admin-guide/xfs.rst +++ b/Documentation/admin-guide/xfs.rst @@ -253,7 +253,7 @@ The following sysctls are available for the XFS filesystem: pool. fs.xfs.speculative_prealloc_lifetime - (Units: seconds Min: 1 Default: 300 Max: 86400) + (Units: seconds Min: 1 Default: 300 Max: 86400) The interval at which the background scanning for inodes with unused speculative preallocation runs. The scan removes unused preallocation from clean inodes and releases diff --git a/Documentation/core-api/xarray.rst b/Documentation/core-api/xarray.rst index fcedc5349ace..640934b6f7b4 100644 --- a/Documentation/core-api/xarray.rst +++ b/Documentation/core-api/xarray.rst @@ -25,10 +25,6 @@ good performance with large indices. If your index can be larger than ``ULONG_MAX`` then the XArray is not the data type for you. The most important user of the XArray is the page cache. -Each non-``NULL`` entry in the array has three bits associated with -it called marks. Each mark may be set or cleared independently of -the others. You can iterate over entries which are marked. - Normal pointers may be stored in the XArray directly. They must be 4-byte aligned, which is true for any pointer returned from kmalloc() and alloc_page(). It isn't true for arbitrary user-space pointers, @@ -41,12 +37,11 @@ When you retrieve an entry from the XArray, you can check whether it is a value entry by calling xa_is_value(), and convert it back to an integer by calling xa_to_value(). -Some users want to store tagged pointers instead of using the marks -described above. They can call xa_tag_pointer() to create an -entry with a tag, xa_untag_pointer() to turn a tagged entry -back into an untagged pointer and xa_pointer_tag() to retrieve -the tag of an entry. Tagged pointers use the same bits that are used -to distinguish value entries from normal pointers, so each user must +Some users want to tag the pointers they store in the XArray. You can +call xa_tag_pointer() to create an entry with a tag, xa_untag_pointer() +to turn a tagged entry back into an untagged pointer and xa_pointer_tag() +to retrieve the tag of an entry. Tagged pointers use the same bits that +are used to distinguish value entries from normal pointers, so you must decide whether they want to store value entries or tagged pointers in any particular XArray. @@ -56,10 +51,9 @@ conflict with value entries or internal entries. An unusual feature of the XArray is the ability to create entries which occupy a range of indices. Once stored to, looking up any index in the range will return the same entry as looking up any other index in -the range. Setting a mark on one index will set it on all of them. -Storing to any index will store to all of them. Multi-index entries can -be explicitly split into smaller entries, or storing ``NULL`` into any -entry will cause the XArray to forget about the range. +the range. Storing to any index will store to all of them. Multi-index +entries can be explicitly split into smaller entries, or storing ``NULL`` +into any entry will cause the XArray to forget about the range. Normal API ========== @@ -87,17 +81,11 @@ If you want to only store a new entry to an index if the current entry at that index is ``NULL``, you can use xa_insert() which returns ``-EBUSY`` if the entry is not empty. -You can enquire whether a mark is set on an entry by using -xa_get_mark(). If the entry is not ``NULL``, you can set a mark -on it by using xa_set_mark() and remove the mark from an entry by -calling xa_clear_mark(). You can ask whether any entry in the -XArray has a particular mark set by calling xa_marked(). - You can copy entries out of the XArray into a plain array by calling -xa_extract(). Or you can iterate over the present entries in -the XArray by calling xa_for_each(). You may prefer to use -xa_find() or xa_find_after() to move to the next present -entry in the XArray. +xa_extract(). Or you can iterate over the present entries in the XArray +by calling xa_for_each(), xa_for_each_start() or xa_for_each_range(). +You may prefer to use xa_find() or xa_find_after() to move to the next +present entry in the XArray. Calling xa_store_range() stores the same entry in a range of indices. If you do this, some of the other operations will behave @@ -124,6 +112,31 @@ xa_destroy(). If the XArray entries are pointers, you may wish to free the entries first. You can do this by iterating over all present entries in the XArray using the xa_for_each() iterator. +Search Marks +------------ + +Each entry in the array has three bits associated with it called marks. +Each mark may be set or cleared independently of the others. You can +iterate over marked entries by using the xa_for_each_marked() iterator. + +You can enquire whether a mark is set on an entry by using +xa_get_mark(). If the entry is not ``NULL``, you can set a mark on it +by using xa_set_mark() and remove the mark from an entry by calling +xa_clear_mark(). You can ask whether any entry in the XArray has a +particular mark set by calling xa_marked(). Erasing an entry from the +XArray causes all marks associated with that entry to be cleared. + +Setting or clearing a mark on any index of a multi-index entry will +affect all indices covered by that entry. Querying the mark on any +index will return the same result. + +There is no way to iterate over entries which are not marked; the data +structure does not allow this to be implemented efficiently. There are +not currently iterators to search for logical combinations of bits (eg +iterate over all entries which have both ``XA_MARK_1`` and ``XA_MARK_2`` +set, or iterate over all entries which have ``XA_MARK_0`` or ``XA_MARK_2`` +set). It would be possible to add these if a user arises. + Allocating XArrays ------------------ @@ -180,6 +193,8 @@ No lock needed: Takes RCU read lock: * xa_load() * xa_for_each() + * xa_for_each_start() + * xa_for_each_range() * xa_find() * xa_find_after() * xa_extract() @@ -419,10 +434,9 @@ you last processed. If you have interrupts disabled while iterating, then it is good manners to pause the iteration and reenable interrupts every ``XA_CHECK_SCHED`` entries. -The xas_get_mark(), xas_set_mark() and -xas_clear_mark() functions require the xa_state cursor to have -been moved to the appropriate location in the xarray; they will do -nothing if you have called xas_pause() or xas_set() +The xas_get_mark(), xas_set_mark() and xas_clear_mark() functions require +the xa_state cursor to have been moved to the appropriate location in the +XArray; they will do nothing if you have called xas_pause() or xas_set() immediately before. You can call xas_set_update() to have a callback function diff --git a/Documentation/dev-tools/kcov.rst b/Documentation/dev-tools/kcov.rst index 36890b026e77..1c4e1825d769 100644 --- a/Documentation/dev-tools/kcov.rst +++ b/Documentation/dev-tools/kcov.rst @@ -251,11 +251,11 @@ selectively from different subsystems. .. code-block:: c struct kcov_remote_arg { - unsigned trace_mode; - unsigned area_size; - unsigned num_handles; - uint64_t common_handle; - uint64_t handles[0]; + __u32 trace_mode; + __u32 area_size; + __u32 num_handles; + __aligned_u64 common_handle; + __aligned_u64 handles[0]; }; #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index ecdfdc9d4b03..61ae13c44f91 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -203,12 +203,12 @@ Test Module Kselftest tests the kernel from userspace. Sometimes things need testing from within the kernel, one method of doing this is to create a test module. We can tie the module into the kselftest framework by -using a shell script test runner. ``kselftest_module.sh`` is designed +using a shell script test runner. ``kselftest/module.sh`` is designed to facilitate this process. There is also a header file provided to assist writing kernel modules that are for use with kselftest: - ``tools/testing/kselftest/kselftest_module.h`` -- ``tools/testing/kselftest/kselftest_module.sh`` +- ``tools/testing/kselftest/kselftest/module.sh`` How to use ---------- @@ -247,7 +247,7 @@ A bare bones test module might look like this: #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include "../tools/testing/selftests/kselftest_module.h" + #include "../tools/testing/selftests/kselftest/module.h" KSTM_MODULE_GLOBALS(); @@ -276,7 +276,7 @@ Example test script #!/bin/bash # SPDX-License-Identifier: GPL-2.0+ - $(dirname $0)/../kselftest_module.sh "foo" test_foo + $(dirname $0)/../kselftest/module.sh "foo" test_foo Test Harness diff --git a/Documentation/dev-tools/kunit/index.rst b/Documentation/dev-tools/kunit/index.rst index 26ffb46bdf99..c60d760a0eed 100644 --- a/Documentation/dev-tools/kunit/index.rst +++ b/Documentation/dev-tools/kunit/index.rst @@ -9,6 +9,7 @@ KUnit - Unit Testing for the Linux Kernel start usage + kunit-tool api/index faq diff --git a/Documentation/dev-tools/kunit/kunit-tool.rst b/Documentation/dev-tools/kunit/kunit-tool.rst new file mode 100644 index 000000000000..50d46394e97e --- /dev/null +++ b/Documentation/dev-tools/kunit/kunit-tool.rst @@ -0,0 +1,57 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +kunit_tool How-To +================= + +What is kunit_tool? +=================== + +kunit_tool is a script (``tools/testing/kunit/kunit.py``) that aids in building +the Linux kernel as UML (`User Mode Linux +<http://user-mode-linux.sourceforge.net/>`_), running KUnit tests, parsing +the test results and displaying them in a user friendly manner. + +What is a kunitconfig? +====================== + +It's just a defconfig that kunit_tool looks for in the base directory. +kunit_tool uses it to generate a .config as you might expect. In addition, it +verifies that the generated .config contains the CONFIG options in the +kunitconfig; the reason it does this is so that it is easy to be sure that a +CONFIG that enables a test actually ends up in the .config. + +How do I use kunit_tool? +======================== + +If a kunitconfig is present at the root directory, all you have to do is: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run + +However, you most likely want to use it with the following options: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all` + +- ``--timeout`` sets a maximum amount of time to allow tests to run. +- ``--jobs`` sets the number of threads to use to build the kernel. + +If you just want to use the defconfig that ships with the kernel, you can +append the ``--defconfig`` flag as well: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all` --defconfig + +.. note:: + This command is particularly helpful for getting started because it + just works. No kunitconfig needs to be present. + +For a list of all the flags supported by kunit_tool, you can run: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run --help diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst index aeeddfafeea2..4e1d24db6b13 100644 --- a/Documentation/dev-tools/kunit/start.rst +++ b/Documentation/dev-tools/kunit/start.rst @@ -19,21 +19,21 @@ The wrapper can be run with: .. code-block:: bash - ./tools/testing/kunit/kunit.py run + ./tools/testing/kunit/kunit.py run --defconfig -Creating a kunitconfig -====================== -The Python script is a thin wrapper around Kbuild as such, it needs to be -configured with a ``kunitconfig`` file. This file essentially contains the +For more information on this wrapper (also called kunit_tool) checkout the +:doc:`kunit-tool` page. + +Creating a .kunitconfig +======================= +The Python script is a thin wrapper around Kbuild. As such, it needs to be +configured with a ``.kunitconfig`` file. This file essentially contains the regular Kernel config, with the specific test targets as well. .. code-block:: bash - git clone -b master https://kunit.googlesource.com/kunitconfig $PATH_TO_KUNITCONFIG_REPO cd $PATH_TO_LINUX_REPO - ln -s $PATH_TO_KUNIT_CONFIG_REPO/kunitconfig kunitconfig - -You may want to add kunitconfig to your local gitignore. + cp arch/um/configs/kunit_defconfig .kunitconfig Verifying KUnit Works --------------------- @@ -59,8 +59,8 @@ If everything worked correctly, you should see the following: followed by a list of tests that are run. All of them should be passing. .. note:: - Because it is building a lot of sources for the first time, the ``Building - kunit kernel`` step may take a while. + Because it is building a lot of sources for the first time, the + ``Building KUnit kernel`` step may take a while. Writing your first test ======================= @@ -148,7 +148,7 @@ and the following to ``drivers/misc/Makefile``: obj-$(CONFIG_MISC_EXAMPLE_TEST) += example-test.o -Now add it to your ``kunitconfig``: +Now add it to your ``.kunitconfig``: .. code-block:: none @@ -159,7 +159,7 @@ Now you can run the test: .. code-block:: bash - ./tools/testing/kunit/kunit.py + ./tools/testing/kunit/kunit.py run You should see the following failure: diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index c6e69634e274..b9a065ab681e 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -16,7 +16,7 @@ Organization of this document ============================= This document is organized into two main sections: Testing and Isolating -Behavior. The first covers what a unit test is and how to use KUnit to write +Behavior. The first covers what unit tests are and how to use KUnit to write them. The second covers how to use KUnit to isolate code and make it possible to unit test code that was otherwise un-unit-testable. @@ -174,13 +174,13 @@ Test Suites ~~~~~~~~~~~ Now obviously one unit test isn't very helpful; the power comes from having -many test cases covering all of your behaviors. Consequently it is common to -have many *similar* tests; in order to reduce duplication in these closely -related tests most unit testing frameworks provide the concept of a *test -suite*, in KUnit we call it a *test suite*; all it is is just a collection of -test cases for a unit of code with a set up function that gets invoked before -every test cases and then a tear down function that gets invoked after every -test case completes. +many test cases covering all of a unit's behaviors. Consequently it is common +to have many *similar* tests; in order to reduce duplication in these closely +related tests most unit testing frameworks - including KUnit - provide the +concept of a *test suite*. A *test suite* is just a collection of test cases +for a unit of code with a set up function that gets invoked before every test +case and then a tear down function that gets invoked after every test case +completes. Example: @@ -211,7 +211,7 @@ KUnit test framework. .. note:: A test case will only be run if it is associated with a test suite. -For a more information on these types of things see the :doc:`api/test`. +For more information on these types of things see the :doc:`api/test`. Isolating Behavior ================== @@ -338,7 +338,7 @@ We can easily test this code by *faking out* the underlying EEPROM: return count; } - ssize_t fake_eeprom_write(struct eeprom *this, size_t offset, const char *buffer, size_t count) + ssize_t fake_eeprom_write(struct eeprom *parent, size_t offset, const char *buffer, size_t count) { struct fake_eeprom *this = container_of(parent, struct fake_eeprom, parent); @@ -454,7 +454,7 @@ KUnit on non-UML architectures By default KUnit uses UML as a way to provide dependencies for code under test. Under most circumstances KUnit's usage of UML should be treated as an implementation detail of how KUnit works under the hood. Nevertheless, there -are instances where being able to run architecture specific code, or test +are instances where being able to run architecture specific code or test against real hardware is desirable. For these reasons KUnit supports running on other architectures. @@ -557,7 +557,7 @@ run your tests on your hardware setup just by compiling for your architecture. .. important:: Always prefer tests that run on UML to tests that only run under a particular architecture, and always prefer tests that run under QEMU or another easy - (and monitarily free) to obtain software environment to a specific piece of + (and monetarily free) to obtain software environment to a specific piece of hardware. Nevertheless, there are still valid reasons to write an architecture or hardware diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt index 2210f4359c45..8347b1e7c080 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -18,8 +18,10 @@ Optional properties: - dma-names: should contain "tx" and "rx". - atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO capable I2C controllers. -- i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c" - and "atmel,sama5d2-i2c". +- i2c-sda-hold-time-ns: TWD hold time, only available for: + "atmel,sama5d4-i2c", + "atmel,sama5d2-i2c", + "microchip,sam9x60-i2c". - Child nodes conforming to i2c bus binding Examples : diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml index b68be3aaf587..e1f6d64bdccd 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml# @@ -53,7 +53,8 @@ patternProperties: description: | The channel number. It can have up to 8 channels numbered from 0 to 7. items: - maximum: 7 + - minimum: 0 + maximum: 7 diff-channels: description: see Documentation/devicetree/bindings/iio/adc/adc.txt diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 27e1b4cebfbd..6bdcc3f84bd3 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -10,7 +10,6 @@ Required properties: - #size-cells: 0 - spi-max-frequency: Maximum frequency of the SPI bus the chip can operate at should be less than or equal to 18 MHz. - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. - interrupt-parent: the phandle to the interrupt controller which provides the interrupt. - interrupts: interrupt specification for data-ready. @@ -23,6 +22,7 @@ Optional properties: reset. - device-state-gpios: Input GPIO that indicates if the device is in a sleep state or if the device is active. + - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Example: tcan4x5x: tcan4x5x@0 { @@ -36,5 +36,5 @@ tcan4x5x: tcan4x5x@0 { interrupts = <14 GPIO_ACTIVE_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt index 299c0dcd67db..250f8d8cdce4 100644 --- a/Documentation/devicetree/bindings/net/fsl-fman.txt +++ b/Documentation/devicetree/bindings/net/fsl-fman.txt @@ -403,6 +403,19 @@ PROPERTIES The settings and programming routines for internal/external MDIO are different. Must be included for internal MDIO. +- fsl,erratum-a011043 + Usage: optional + Value type: <boolean> + Definition: Indicates the presence of the A011043 erratum + describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely + set when reading internal PCS registers. MDIO reads to + internal PCS registers may result in having the + MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and + read data (MDIO_DATA[MDIO_DATA]) is correct. + Software may get false read error when reading internal + PCS registers through MDIO. As a workaround, all internal + MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. + For internal PHY device on internal mdio bus, a PHY node should be created. See the definition of the PHY node in booting-without-of.txt for an example of how to define a PHY (Internal PHY has no interrupt line). diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 4845e29411e4..e08cd4c4d568 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -347,6 +347,7 @@ allOf: - st,spear600-gmac then: + properties: snps,tso: $ref: /schemas/types.yaml#definitions/flag description: diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt index 6e5341b4f891..ee59409640f2 100644 --- a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt +++ b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt @@ -22,6 +22,6 @@ Example: }; ðernet_switch { - resets = <&reset>; + resets = <&reset 26>; reset-names = "switch"; }; diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 732339275848..1e0ca6ccf64b 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -111,7 +111,7 @@ patternProperties: spi-rx-bus-width: allOf: - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4 ] + - enum: [ 1, 2, 4, 8 ] - default: 1 description: Bus width to the SPI bus used for MISO. @@ -123,7 +123,7 @@ patternProperties: spi-tx-bus-width: allOf: - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4 ] + - enum: [ 1, 2, 4, 8 ] - default: 1 description: Bus width to the SPI bus used for MOSI. diff --git a/Documentation/features/debug/gcov-profile-all/arch-support.txt b/Documentation/features/debug/gcov-profile-all/arch-support.txt index 059d58a549c7..6fb2b0671994 100644 --- a/Documentation/features/debug/gcov-profile-all/arch-support.txt +++ b/Documentation/features/debug/gcov-profile-all/arch-support.txt @@ -23,7 +23,7 @@ | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | - | riscv: | TODO | + | riscv: | ok | | s390: | ok | | sh: | ok | | sparc: | TODO | diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.rst index 845d689e0fd7..e443be7928db 100644 --- a/Documentation/filesystems/overlayfs.txt +++ b/Documentation/filesystems/overlayfs.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Written by: Neil Brown Please see MAINTAINERS file for where to send questions. @@ -181,7 +183,7 @@ Kernel config options: worried about backward compatibility with kernels that have the redirect_dir feature and follow redirects even if turned off. -Module options (can also be changed through /sys/module/overlay/parameters/*): +Module options (can also be changed through /sys/module/overlay/parameters/): - "redirect_dir=BOOL": See OVERLAY_FS_REDIRECT_DIR kernel config option above. @@ -263,7 +265,7 @@ top, lower2 the middle and lower3 the bottom layer. Metadata only copy up --------------------- +--------------------- When metadata only copy up feature is enabled, overlayfs will only copy up metadata (as opposed to whole file), when a metadata specific operation @@ -286,10 +288,10 @@ pointed by REDIRECT. This should not be possible on local system as setting "trusted." xattrs will require CAP_SYS_ADMIN. But it should be possible for untrusted layers like from a pen drive. -Note: redirect_dir={off|nofollow|follow(*)} conflicts with metacopy=on, and +Note: redirect_dir={off|nofollow|follow[*]} conflicts with metacopy=on, and results in an error. -(*) redirect_dir=follow only conflicts with metacopy=on if upperdir=... is +[*] redirect_dir=follow only conflicts with metacopy=on if upperdir=... is given. Sharing and copying layers diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst index 74bef19f69f0..231e6a64957f 100644 --- a/Documentation/kbuild/kconfig-language.rst +++ b/Documentation/kbuild/kconfig-language.rst @@ -196,14 +196,11 @@ applicable everywhere (see syntax). or equal to the first symbol and smaller than or equal to the second symbol. -- help text: "help" or "---help---" +- help text: "help" This defines a help text. The end of the help text is determined by the indentation level, this means it ends at the first line which has a smaller indentation than the first line of the help text. - "---help---" and "help" do not differ in behaviour, "---help---" is - used to help visually separate configuration logic from help within - the file as an aid to developers. - misc options: "option" <symbol>[=<value>] diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst index b9b50553bfc5..d7e6534a8505 100644 --- a/Documentation/kbuild/makefiles.rst +++ b/Documentation/kbuild/makefiles.rst @@ -297,9 +297,19 @@ more details, with real examples. If CONFIG_EXT2_FS is set to either 'y' (built-in) or 'm' (modular) the corresponding obj- variable will be set, and kbuild will descend down in the ext2 directory. - Kbuild only uses this information to decide that it needs to visit - the directory, it is the Makefile in the subdirectory that - specifies what is modular and what is built-in. + + Kbuild uses this information not only to decide that it needs to visit + the directory, but also to decide whether or not to link objects from + the directory into vmlinux. + + When Kbuild descends into the directory with 'y', all built-in objects + from that directory are combined into the built-in.a, which will be + eventually linked into vmlinux. + + When Kbuild descends into the directory with 'm', in contrast, nothing + from that directory will be linked into vmlinux. If the Makefile in + that directory specifies obj-y, those objects will be left orphan. + It is very likely a bug of the Makefile or of dependencies in Kconfig. It is good practice to use a `CONFIG_` variable when assigning directory names. This allows kbuild to totally skip the directory if the diff --git a/Documentation/media/v4l-drivers/meye.rst b/Documentation/media/v4l-drivers/meye.rst index a572996cdbf6..dc57a6a91b43 100644 --- a/Documentation/media/v4l-drivers/meye.rst +++ b/Documentation/media/v4l-drivers/meye.rst @@ -95,7 +95,7 @@ so all video4linux tools (like xawtv) should work with this driver. Besides the video4linux interface, the driver has a private interface for accessing the Motion Eye extended parameters (camera sharpness, -agc, video framerate), the shapshot and the MJPEG capture facilities. +agc, video framerate), the snapshot and the MJPEG capture facilities. This interface consists of several ioctls (prototypes and structures can be found in include/linux/meye.h): diff --git a/Documentation/networking/dsa/sja1105.rst b/Documentation/networking/dsa/sja1105.rst index eef20d0bcf7c..64553d8d91cb 100644 --- a/Documentation/networking/dsa/sja1105.rst +++ b/Documentation/networking/dsa/sja1105.rst @@ -230,12 +230,6 @@ simultaneously on two ports. The driver checks the consistency of the schedules against this restriction and errors out when appropriate. Schedule analysis is needed to avoid this, which is outside the scope of the document. -At the moment, the time-aware scheduler can only be triggered based on a -standalone clock and not based on PTP time. This means the base-time argument -from tc-taprio is ignored and the schedule starts right away. It also means it -is more difficult to phase-align the scheduler with the other devices in the -network. - Device Tree bindings and board design ===================================== diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index fd26788e8c96..48ccb1b31160 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -603,7 +603,7 @@ tcp_synack_retries - INTEGER with the current initial RTO of 1second. With this the final timeout for a passive TCP connection will happen after 63seconds. -tcp_syncookies - BOOLEAN +tcp_syncookies - INTEGER Only valid when the kernel was compiled with CONFIG_SYN_COOKIES Send out syncookies when the syn backlog queue of a socket overflows. This is to prevent against the common 'SYN flood attack' diff --git a/Documentation/networking/j1939.rst b/Documentation/networking/j1939.rst index dc60b13fcd09..f5be243d250a 100644 --- a/Documentation/networking/j1939.rst +++ b/Documentation/networking/j1939.rst @@ -339,7 +339,7 @@ To claim an address following code example can be used: .pgn = J1939_PGN_ADDRESS_CLAIMED, .pgn_mask = J1939_PGN_PDU1_MAX, }, { - .pgn = J1939_PGN_ADDRESS_REQUEST, + .pgn = J1939_PGN_REQUEST, .pgn_mask = J1939_PGN_PDU1_MAX, }, { .pgn = J1939_PGN_ADDRESS_COMMANDED, diff --git a/Documentation/networking/netdev-FAQ.rst b/Documentation/networking/netdev-FAQ.rst index 642fa963be3c..d5c9320901c3 100644 --- a/Documentation/networking/netdev-FAQ.rst +++ b/Documentation/networking/netdev-FAQ.rst @@ -34,8 +34,8 @@ the names, the ``net`` tree is for fixes to existing code already in the mainline tree from Linus, and ``net-next`` is where the new code goes for the future release. You can find the trees here: -- https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git -- https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git +- https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git +- https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git Q: How often do changes from these trees make it to the mainline Linus tree? ---------------------------------------------------------------------------- diff --git a/Documentation/process/embargoed-hardware-issues.rst b/Documentation/process/embargoed-hardware-issues.rst index 799580acc8de..5d54946cfc75 100644 --- a/Documentation/process/embargoed-hardware-issues.rst +++ b/Documentation/process/embargoed-hardware-issues.rst @@ -255,7 +255,7 @@ an involved disclosed party. The current ambassadors list: Red Hat Josh Poimboeuf <jpoimboe@redhat.com> SUSE Jiri Kosina <jkosina@suse.cz> - Amazon + Amazon Peter Bowen <pzb@amzn.com> Google Kees Cook <keescook@chromium.org> ============= ======================================================== diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst index 21aa7d5358e6..6399d92f0b21 100644 --- a/Documentation/process/index.rst +++ b/Documentation/process/index.rst @@ -60,6 +60,7 @@ lack of a better place. volatile-considered-harmful botching-up-ioctls clang-format + ../riscv/patch-acceptance .. only:: subproject and html diff --git a/Documentation/riscv/index.rst b/Documentation/riscv/index.rst index 215fd3c1f2d5..fa33bffd8992 100644 --- a/Documentation/riscv/index.rst +++ b/Documentation/riscv/index.rst @@ -7,6 +7,7 @@ RISC-V architecture boot-image-header pmu + patch-acceptance .. only:: subproject and html diff --git a/Documentation/riscv/patch-acceptance.rst b/Documentation/riscv/patch-acceptance.rst new file mode 100644 index 000000000000..dfe0ac5624fb --- /dev/null +++ b/Documentation/riscv/patch-acceptance.rst @@ -0,0 +1,35 @@ +.. SPDX-License-Identifier: GPL-2.0 + +arch/riscv maintenance guidelines for developers +================================================ + +Overview +-------- +The RISC-V instruction set architecture is developed in the open: +in-progress drafts are available for all to review and to experiment +with implementations. New module or extension drafts can change +during the development process - sometimes in ways that are +incompatible with previous drafts. This flexibility can present a +challenge for RISC-V Linux maintenance. Linux maintainers disapprove +of churn, and the Linux development process prefers well-reviewed and +tested code over experimental code. We wish to extend these same +principles to the RISC-V-related code that will be accepted for +inclusion in the kernel. + +Submit Checklist Addendum +------------------------- +We'll only accept patches for new modules or extensions if the +specifications for those modules or extensions are listed as being +"Frozen" or "Ratified" by the RISC-V Foundation. (Developers may, of +course, maintain their own Linux kernel trees that contain code for +any draft extensions that they wish.) + +Additionally, the RISC-V specification allows implementors to create +their own custom extensions. These custom extensions aren't required +to go through any review or ratification process by the RISC-V +Foundation. To avoid the maintenance complexity and potential +performance impact of adding kernel code for implementor-specific +RISC-V extensions, we'll only to accept patches for extensions that +have been officially frozen or ratified by the RISC-V Foundation. +(Implementors, may, of course, maintain their own Linux kernel trees +containing code for any custom extensions that they wish.) diff --git a/Documentation/scsi/smartpqi.txt b/Documentation/scsi/smartpqi.txt index 201f80c7c050..df129f55ace5 100644 --- a/Documentation/scsi/smartpqi.txt +++ b/Documentation/scsi/smartpqi.txt @@ -29,7 +29,7 @@ smartpqi specific entries in /sys smartpqi host attributes: ------------------------- /sys/class/scsi_host/host*/rescan - /sys/class/scsi_host/host*/version + /sys/class/scsi_host/host*/driver_version The host rescan attribute is a write only attribute. Writing to this attribute will trigger the driver to scan for new, changed, or removed |