summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/pci/altera-pcie.txt4
-rw-r--r--Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt18
-rw-r--r--Documentation/devicetree/bindings/pci/layerscape-pci.txt3
-rw-r--r--Documentation/devicetree/bindings/pci/rcar-pci.txt4
-rw-r--r--Documentation/devicetree/bindings/pci/ti-pci.txt11
5 files changed, 35 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt
index 6c396f17c91a..816b244a221e 100644
--- a/Documentation/devicetree/bindings/pci/altera-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -1,11 +1,13 @@
* Altera PCIe controller
Required properties:
-- compatible : should contain "altr,pcie-root-port-1.0"
+- compatible : should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0"
- reg: a list of physical base address and length for TXS and CRA.
+ For "altr,pcie-root-port-2.0", additional HIP base address and length.
- reg-names: must include the following entries:
"Txs": TX slave port region
"Cra": Control register access region
+ "Hip": Hard IP region (if "altr,pcie-root-port-2.0")
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends
on the parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index d514c1f2365f..a7f5f5afa0e6 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -9,6 +9,7 @@ Required properties:
- "fsl,imx6sx-pcie",
- "fsl,imx6qp-pcie"
- "fsl,imx7d-pcie"
+ - "fsl,imx8mq-pcie"
- reg: base address and length of the PCIe controller
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
@@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie:
PCIE_PHY power domains
- power-domain-names: Must be "pcie", "pcie_phy"
-Additional required properties for imx7d-pcie:
+Additional required properties for imx7d-pcie and imx8mq-pcie:
- power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
- resets: Must contain phandles to PCIe-related reset lines exposed by SRC
IP block
@@ -53,6 +54,11 @@ Additional required properties for imx7d-pcie:
- "pciephy"
- "apps"
- "turnoff"
+- fsl,imx7d-pcie-phy: A phandle to an fsl,imx7d-pcie-phy node.
+
+Additional required properties for imx8mq-pcie:
+- clock-names: Must include the following additional entries:
+ - "pcie_aux"
Example:
@@ -79,3 +85,13 @@ Example:
clocks = <&clks 144>, <&clks 206>, <&clks 189>;
clock-names = "pcie", "pcie_bus", "pcie_phy";
};
+
+* Freescale i.MX7d PCIe PHY
+
+This is the PHY associated with the IMX7d PCIe controller. It's used by the
+PCI-e controller via the fsl,imx7d-pcie-phy phandle.
+
+Required properties:
+- compatible:
+ - "fsl,imx7d-pcie-phy"
+- reg: base address and length of the PCIe PHY controller
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 9b2b8d66d1f4..e20ceaab9b38 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -13,6 +13,7 @@ information.
Required properties:
- compatible: should contain the platform identifier such as:
+ RC mode:
"fsl,ls1021a-pcie"
"fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
"fsl,ls2088a-pcie"
@@ -20,6 +21,8 @@ Required properties:
"fsl,ls1046a-pcie"
"fsl,ls1043a-pcie"
"fsl,ls1012a-pcie"
+ EP mode:
+ "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
- reg: base addresses and lengths of the PCIe controller register blocks.
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index 976ef7bfff93..6904882a0e94 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -3,6 +3,7 @@
Required properties:
compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
"renesas,pcie-r8a7744" for the R8A7744 SoC;
+ "renesas,pcie-r8a774c0" for the R8A774C0 SoC;
"renesas,pcie-r8a7779" for the R8A7779 SoC;
"renesas,pcie-r8a7790" for the R8A7790 SoC;
"renesas,pcie-r8a7791" for the R8A7791 SoC;
@@ -13,7 +14,8 @@ compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
"renesas,pcie-r8a77990" for the R8A77990 SoC;
"renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or
RZ/G1 compatible device.
- "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device.
+ "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 or
+ RZ/G2 compatible device.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 452fe48c4fdd..d5cbfe6b0d89 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -1,14 +1,21 @@
TI PCI Controllers
PCIe DesignWare Controller
- - compatible: Should be "ti,dra7-pcie" for RC
- Should be "ti,dra7-pcie-ep" for EP
+ - compatible: Should be "ti,dra7-pcie" for RC (deprecated)
+ Should be "ti,dra7-pcie-ep" for EP (deprecated)
+ Should be "ti,dra746-pcie-rc" for dra74x/dra76 in RC mode
+ Should be "ti,dra746-pcie-ep" for dra74x/dra76 in EP mode
+ Should be "ti,dra726-pcie-rc" for dra72x in RC mode
+ Should be "ti,dra726-pcie-ep" for dra72x in EP mode
- phys : list of PHY specifiers (used by generic PHY framework)
- phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
number of PHYs as specified in *phys* property.
- ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
where <X> is the instance number of the pcie from the HW spec.
- num-lanes as specified in ../designware-pcie.txt
+ - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control
+ module and the register offset to specify lane
+ selection.
HOST MODE
=========