diff options
Diffstat (limited to 'Documentation')
33 files changed, 652 insertions, 52 deletions
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml index 8a210c4c5f82..0a3ef7fd03fa 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml @@ -29,6 +29,7 @@ properties: - description: Link clock from DP PHY - description: VCO DIV clock from DP PHY - description: AHB config clock from GCC + - description: GPLL0 div source from GCC clock-names: items: @@ -39,6 +40,7 @@ properties: - const: dp_phy_pll_link_clk - const: dp_phy_pll_vco_div_clk - const: cfg_ahb_clk + - const: gcc_disp_gpll0_div_clk_src '#clock-cells': const: 1 @@ -46,6 +48,16 @@ properties: '#power-domain-cells': const: 1 + power-domains: + description: + A phandle and PM domain specifier for the CX power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing the power domain's performance point. + maxItems: 1 + reg: maxItems: 1 @@ -63,23 +75,31 @@ examples: - | #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/clock/qcom,gcc-sm6125.h> + #include <dt-bindings/power/qcom-rpmpd.h> clock-controller@5f00000 { compatible = "qcom,sm6125-dispcc"; reg = <0x5f00000 0x20000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&dsi0_phy 0>, <&dsi0_phy 1>, <&dsi1_phy 1>, <&dp_phy 0>, <&dp_phy 1>, - <&gcc GCC_DISP_AHB_CLK>; + <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; clock-names = "bi_tcxo", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", "dsi1_phy_pll_out_dsiclk", "dp_phy_pll_link_clk", "dp_phy_pll_vco_div_clk", - "cfg_ahb_clk"; + "cfg_ahb_clk", + "gcc_disp_gpll0_div_clk_src"; + + required-opps = <&rpmhpd_opp_ret>; + power-domains = <&rpmpd SM6125_VDDCX>; + #clock-cells = <1>; #power-domain-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml index 0521261b04a9..ae894d996d21 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml @@ -49,6 +49,9 @@ properties: description: | OF device-tree gpio specification for RSTX pin(active low system reset) + interrupts: + maxItems: 1 + toshiba,hpd-pin: $ref: /schemas/types.yaml#/definitions/uint32 enum: diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index 7a7cf3fb3e6d..a31ec9a4179f 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -28,6 +28,7 @@ properties: - qcom,sm8350-dp - items: - enum: + - qcom,sm8250-dp - qcom,sm8450-dp - qcom,sm8550-dp - const: qcom,sm8350-dp diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index 01848bdd5873..b8d1f2b7d541 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -27,6 +27,7 @@ properties: - qcom,sdm660-dsi-ctrl - qcom,sdm845-dsi-ctrl - qcom,sm6115-dsi-ctrl + - qcom,sm6125-dsi-ctrl - qcom,sm6350-dsi-ctrl - qcom,sm6375-dsi-ctrl - qcom,sm8150-dsi-ctrl @@ -166,6 +167,10 @@ properties: description: Phandle to vdd regulator device node + refgen-supply: + description: + Phandle to REFGEN regulator device node + vcca-supply: description: Phandle to vdd regulator device node @@ -301,6 +306,7 @@ allOf: contains: enum: - qcom,msm8998-dsi-ctrl + - qcom,sm6125-dsi-ctrl - qcom,sm6350-dsi-ctrl then: properties: diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index a43e11d3b00d..2361da5f6736 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -19,6 +19,7 @@ properties: - qcom,dsi-phy-14nm-2290 - qcom,dsi-phy-14nm-660 - qcom,dsi-phy-14nm-8953 + - qcom,sm6125-dsi-phy-14nm reg: items: @@ -35,6 +36,16 @@ properties: vcca-supply: description: Phandle to vcca regulator device node. + power-domains: + description: + A phandle and PM domain specifier for an optional power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing the power domain's performance point. + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index 58ca8912a8c3..56b9b247e8c2 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -15,6 +15,12 @@ properties: oneOf: - description: | The driver is parsing the compat string for Adreno to + figure out the chip-id. + items: + - pattern: '^qcom,adreno-[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]$' + - const: qcom,adreno + - description: | + The driver is parsing the compat string for Adreno to figure out the gpu-id and patch level. items: - pattern: '^qcom,adreno-[3-6][0-9][0-9]\.[0-9]$' diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml index ccd7d6417523..a8086ca09d9f 100644 --- a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml @@ -77,6 +77,12 @@ properties: items: - description: MDSS_CORE reset + memory-region: + maxItems: 1 + description: + Phandle to a node describing a reserved framebuffer memory region. + For example, the splash memory region set up by the bootloader. + required: - reg - reg-names diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml index 630b11480496..ea75f0f95d5c 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml @@ -15,6 +15,7 @@ properties: compatible: enum: - qcom,sc7180-dpu + - qcom,sm6125-dpu - qcom,sm6350-dpu - qcom,sm6375-dpu @@ -63,7 +64,9 @@ allOf: - if: properties: compatible: - const: qcom,sm6375-dpu + enum: + - qcom,sm6375-dpu + - qcom,sm6125-dpu then: properties: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml new file mode 100644 index 000000000000..57f0e3647711 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml @@ -0,0 +1,213 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6125-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6125 Display MDSS + +maintainers: + - Marijn Suijten <marijn.suijten@somainline.org> + +description: + SM6125 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm6125-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6125-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm6125-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6125-dsi-phy-14nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm6125.h> + #include <dt-bindings/clock/qcom,gcc-sm6125.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@5e00000 { + compatible = "qcom,sm6125-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x400 0x0>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,sm6125-dpu"; + reg = <0x05e01000 0x83208>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&gcc GCC_DISP_THROTTLE_CORE_CLK>; + clock-names = "bus", + "iface", + "rot", + "lut", + "core", + "vsync", + "throttle"; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + phy@5e94400 { + compatible = "qcom,sm6125-dsi-phy-14nm"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + required-opps = <&rpmpd_opp_nom>; + power-domains = <&rpmpd SM6125_VDDMX>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml index ed0ad194d4ce..63962a8f2faf 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml @@ -131,13 +131,6 @@ examples: remote-endpoint = <&dsi0_in>; }; }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; }; }; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml index 76369a4f7c4d..595a9d56949c 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml @@ -132,13 +132,6 @@ examples: remote-endpoint = <&dsi0_in>; }; }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; }; }; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml index 79a226e4cc6a..f2cbeb435f1b 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml @@ -52,6 +52,12 @@ patternProperties: compatible: const: qcom,sm8350-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8350-dp + "^dsi@[0-9a-f]+$": type: object properties: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml index f26eb5643aed..494e2a080e99 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml @@ -42,6 +42,14 @@ patternProperties: compatible: const: qcom,sm8450-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm8450-dp + - const: qcom,sm8350-dp + "^dsi@[0-9a-f]+$": type: object properties: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml index 887be33ba108..70ce7cb7a80d 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml @@ -42,6 +42,14 @@ patternProperties: compatible: const: qcom,sm8550-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm8550-dp + - const: qcom,sm8350-dp + "^dsi@[0-9a-f]+$": type: object properties: diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index c5d1df680858..e7ab6224b52e 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -18,6 +18,7 @@ properties: - enum: - bananapi,lhr050h41 - feixin,k101-im2byl02 + - tdo,tl050hdv35 - wanchanglong,w552946aba - const: ilitek,ili9881c diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml index 929fe046d1e7..9f1016551e0b 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml @@ -40,6 +40,12 @@ properties: items: - enum: - auo,b101ew05 + # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel + - chunghwa,claa070wp03xg + # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel + - hannstar,hsd101pww2 + # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel + - hydis,hv070wx2-1e0 - tbs,a711-panel - const: panel-lvds diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 1d4936fc5182..25b4589d4a58 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -103,8 +103,6 @@ properties: - cdtech,s070wv95-ct16 # Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel - chefree,ch101olhlwh-002 - # Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel - - chunghwa,claa070wp03xg # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel - chunghwa,claa101wa01a # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel @@ -168,8 +166,6 @@ properties: - hannstar,hsd070pww1 # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel - hannstar,hsd100pxn1 - # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel - - hannstar,hsd101pww2 # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel - hit,tx23d38vm0caa # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel @@ -196,6 +192,8 @@ properties: - innolux,n116bge # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel - innolux,n125hce-gn1 + # InnoLux 15.6" FHD (1920x1080) TFT LCD panel + - innolux,g156hce-l01 # InnoLux 15.6" WXGA TFT LCD panel - innolux,n156bge-l21 # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml index fa6556363cca..ef162b51d010 100644 --- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml @@ -15,17 +15,26 @@ allOf: properties: compatible: - const: sitronix,st7789v + enum: + - edt,et028013dma + - inanbo,t28cp45tn89-v17 + - jasonic,jt240mhqs-hwt-ek-e3 + - sitronix,st7789v reg: true reset-gpios: true power-supply: true backlight: true port: true + rotation: true spi-cpha: true spi-cpol: true + spi-rx-bus-width: + minimum: 0 + maximum: 1 + dc-gpios: maxItems: 1 description: DCX pin, Display data/command selection pin in parallel interface @@ -33,7 +42,6 @@ properties: required: - compatible - reg - - reset-gpios - power-supply unevaluatedProperties: false @@ -52,6 +60,7 @@ examples: reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; backlight = <&pwm_bl>; power-supply = <&power>; + rotation = <180>; spi-max-frequency = <100000>; spi-cpol; spi-cpha; diff --git a/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml b/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml new file mode 100644 index 000000000000..d817f998cddc --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/startek,kd070fhfid015.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Startek Electronic Technology Co. kd070fhfid015 7 inch TFT LCD panel + +maintainers: + - Alexandre Mergnat <amergnat@baylibre.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: startek,kd070fhfid015 + + enable-gpios: true + + iovcc-supply: + description: Reference to the regulator powering the panel IO pins. + + reg: + maxItems: 1 + description: DSI virtual channel + + reset-gpios: true + + port: true + + power-supply: true + +additionalProperties: false + +required: + - compatible + - enable-gpios + - iovcc-supply + - reg + - reset-gpios + - port + - power-supply + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "startek,kd070fhfid015"; + reg = <0>; + enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>; + iovcc-supply = <&mt6357_vsim1_reg>; + power-supply = <&vsys_lcm_reg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml b/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml new file mode 100644 index 000000000000..6ba323683921 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Visionox R66451 AMOLED DSI Panel + +maintainers: + - Jessica Zhang <quic_jesszhan@quicinc.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: visionox,r66451 + + reg: + maxItems: 1 + description: DSI virtual channel + + vddio-supply: true + vdd-supply: true + port: true + reset-gpios: true + +additionalProperties: false + +required: + - compatible + - reg + - vddio-supply + - vdd-supply + - reset-gpios + - port + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "visionox,r66451"; + reg = <0>; + vddio-supply = <&vreg_l12c_1p8>; + vdd-supply = <&vreg_l13c_3p0>; + + reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; + + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml index 94bb5ef567c6..20e2bd15d4d2 100644 --- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml +++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml @@ -49,15 +49,15 @@ properties: solomon,height: $ref: /schemas/types.yaml#/definitions/uint32 - default: 16 description: - Height in pixel of the screen driven by the controller + Height in pixel of the screen driven by the controller. + The default value is controller-dependent. solomon,width: $ref: /schemas/types.yaml#/definitions/uint32 - default: 96 description: - Width in pixel of the screen driven by the controller + Width in pixel of the screen driven by the controller. + The default value is controller-dependent. solomon,page-offset: $ref: /schemas/types.yaml#/definitions/uint32 @@ -157,6 +157,10 @@ allOf: const: sinowealth,sh1106 then: properties: + width: + default: 132 + height: + default: 64 solomon,dclk-div: default: 1 solomon,dclk-frq: @@ -171,6 +175,10 @@ allOf: - solomon,ssd1305 then: properties: + width: + default: 132 + height: + default: 64 solomon,dclk-div: default: 1 solomon,dclk-frq: @@ -185,6 +193,10 @@ allOf: - solomon,ssd1306 then: properties: + width: + default: 128 + height: + default: 64 solomon,dclk-div: default: 1 solomon,dclk-frq: @@ -199,6 +211,10 @@ allOf: - solomon,ssd1307 then: properties: + width: + default: 128 + height: + default: 39 solomon,dclk-div: default: 2 solomon,dclk-frq: @@ -215,6 +231,10 @@ allOf: - solomon,ssd1309 then: properties: + width: + default: 128 + height: + default: 64 solomon,dclk-div: default: 1 solomon,dclk-frq: diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index b6b402f16161..ae09cd3cbce1 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -12,14 +12,18 @@ maintainers: - Tomi Valkeinen <tomi.valkeinen@ti.com> description: | - The AM65x TI Keystone Display SubSystem with two output ports and - two video planes. The first video port supports OLDI and the second - supports DPI format. The fist plane is full video plane with all - features and the second is a "lite plane" without scaling support. + The AM625 and AM65x TI Keystone Display SubSystem with two output + ports and two video planes. In AM65x DSS, the first video port + supports 1 OLDI TX and in AM625 DSS, the first video port output is + internally routed to 2 OLDI TXes. The second video port supports DPI + format. The first plane is full video plane with all features and the + second is a "lite plane" without scaling support. properties: compatible: - const: ti,am65x-dss + enum: + - ti,am625-dss + - ti,am65x-dss reg: description: @@ -80,7 +84,9 @@ properties: port@0: $ref: /schemas/graph.yaml#/properties/port description: - The DSS OLDI output port node form video port 1 + For AM65x DSS, the OLDI output port node from video port 1. + For AM625 DSS, the internal DPI output port node from video + port 1. port@1: $ref: /schemas/graph.yaml#/properties/port diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml index 05e6f2df604c..3e2d216c6432 100644 --- a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml +++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml @@ -13,6 +13,9 @@ description: Supports the Elan eKTH6915 touchscreen controller. This touchscreen controller uses the i2c-hid protocol with a reset GPIO. +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + properties: compatible: items: @@ -24,6 +27,8 @@ properties: interrupts: maxItems: 1 + panel: true + reset-gpios: description: Reset GPIO; not all touchscreens using eKTH6915 hook this up. diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml index 1edad1da1196..358cb8275bf1 100644 --- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml +++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml @@ -14,6 +14,9 @@ description: This touchscreen uses the i2c-hid protocol but has some non-standard power sequencing required. +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + properties: compatible: oneOf: @@ -30,6 +33,8 @@ properties: interrupts: maxItems: 1 + panel: true + reset-gpios: true diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml index 7156b08f7645..138caad96a29 100644 --- a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml @@ -44,6 +44,8 @@ properties: description: HID descriptor address $ref: /schemas/types.yaml#/definitions/uint32 + panel: true + post-power-on-delay-ms: description: Time required by the device after enabling its regulators or powering it on, before it is ready for communication. diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index 895592da9626..431c13335c40 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -10,6 +10,13 @@ maintainers: - Dmitry Torokhov <dmitry.torokhov@gmail.com> properties: + panel: + description: If this touchscreen is integrally connected to a panel, this + is a reference to that panel. The presence of this reference indicates + that the touchscreen should be power sequenced together with the panel + and that they may share power and/or reset signals. + $ref: /schemas/types.yaml#/definitions/phandle + touchscreen-min-x: description: minimum x coordinate reported $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index af60bf1a6664..1dfafc339ddd 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -617,6 +617,8 @@ patternProperties: description: Imagination Technologies Ltd. "^imi,.*": description: Integrated Micro-Electronics Inc. + "^inanbo,.*": + description: Shenzhen INANBO Electronic Technology Co., Ltd. "^incircuit,.*": description: In-Circuit GmbH "^indiedroid,.*": @@ -675,6 +677,8 @@ patternProperties: description: iWave Systems Technologies Pvt. Ltd. "^jadard,.*": description: Jadard Technology Inc. + "^jasonic,.*": + description: Jasonic Technology Ltd. "^jdi,.*": description: Japan Display Inc. "^jedec,.*": diff --git a/Documentation/gpu/amdgpu/flashing.rst b/Documentation/gpu/amdgpu/flashing.rst new file mode 100644 index 000000000000..bd745c42a538 --- /dev/null +++ b/Documentation/gpu/amdgpu/flashing.rst @@ -0,0 +1,33 @@ +======================= + dGPU firmware flashing +======================= + +IFWI +---- +Flashing the dGPU integrated firmware image (IFWI) is supported by GPUs that +use the PSP to orchestrate the update (Navi3x or newer GPUs). +For supported GPUs, `amdgpu` will export a series of sysfs files that can be +used for the flash process. + +The IFWI flash process is: + +1. Ensure the IFWI image is intended for the dGPU on the system. +2. "Write" the IFWI image to the sysfs file `psp_vbflash`. This will stage the IFWI in memory. +3. "Read" from the `psp_vbflash` sysfs file to initiate the flash process. +4. Poll the `psp_vbflash_status` sysfs file to determine when the flash process completes. + +USB-C PD F/W +------------ +On GPUs that support flashing an updated USB-C PD firmware image, the process +is done using the `usbc_pd_fw` sysfs file. + +* Reading the file will provide the current firmware version. +* Writing the name of a firmware payload stored in `/lib/firmware/amdgpu` to the sysfs file will initiate the flash process. + +The firmware payload stored in `/lib/firmware/amdgpu` can be named any name +as long as it doesn't conflict with other existing binaries that are used by +`amdgpu`. + +sysfs files +----------- +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c diff --git a/Documentation/gpu/amdgpu/index.rst b/Documentation/gpu/amdgpu/index.rst index 03c2966cae79..912e699fd373 100644 --- a/Documentation/gpu/amdgpu/index.rst +++ b/Documentation/gpu/amdgpu/index.rst @@ -10,6 +10,7 @@ Next (GCN), Radeon DNA (RDNA), and Compute DNA (CDNA) architectures. module-parameters driver-core display/index + flashing xgmi ras thermal diff --git a/Documentation/gpu/driver-uapi.rst b/Documentation/gpu/driver-uapi.rst index 4411e6919a3d..c08bcbb95fb3 100644 --- a/Documentation/gpu/driver-uapi.rst +++ b/Documentation/gpu/driver-uapi.rst @@ -6,3 +6,14 @@ drm/i915 uAPI ============= .. kernel-doc:: include/uapi/drm/i915_drm.h + +drm/nouveau uAPI +================ + +VM_BIND / EXEC uAPI +------------------- + +.. kernel-doc:: drivers/gpu/drm/nouveau/nouveau_exec.c + :doc: Overview + +.. kernel-doc:: include/uapi/drm/nouveau_drm.h diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index a79fd3549ff8..c19b34b1c0ed 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -466,6 +466,42 @@ DRM MM Range Allocator Function References .. kernel-doc:: drivers/gpu/drm/drm_mm.c :export: +DRM GPU VA Manager +================== + +Overview +-------- + +.. kernel-doc:: drivers/gpu/drm/drm_gpuva_mgr.c + :doc: Overview + +Split and Merge +--------------- + +.. kernel-doc:: drivers/gpu/drm/drm_gpuva_mgr.c + :doc: Split and Merge + +Locking +------- + +.. kernel-doc:: drivers/gpu/drm/drm_gpuva_mgr.c + :doc: Locking + +Examples +-------- + +.. kernel-doc:: drivers/gpu/drm/drm_gpuva_mgr.c + :doc: Examples + +DRM GPU VA Manager Function References +-------------------------------------- + +.. kernel-doc:: include/drm/drm_gpuva_mgr.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_gpuva_mgr.c + :export: + DRM Buddy Allocator =================== @@ -481,8 +517,10 @@ DRM Cache Handling and Fast WC memcpy() .. kernel-doc:: drivers/gpu/drm/drm_cache.c :export: +.. _drm_sync_objects: + DRM Sync Objects -=========================== +================ .. kernel-doc:: drivers/gpu/drm/drm_syncobj.c :doc: Overview @@ -493,6 +531,18 @@ DRM Sync Objects .. kernel-doc:: drivers/gpu/drm/drm_syncobj.c :export: +DRM Execution context +===================== + +.. kernel-doc:: drivers/gpu/drm/drm_exec.c + :doc: Overview + +.. kernel-doc:: include/drm/drm_exec.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_exec.c + :export: + GPU Scheduler ============= diff --git a/Documentation/gpu/rfc/i915_scheduler.rst b/Documentation/gpu/rfc/i915_scheduler.rst index d630f15ab795..ec086e7a43ff 100644 --- a/Documentation/gpu/rfc/i915_scheduler.rst +++ b/Documentation/gpu/rfc/i915_scheduler.rst @@ -135,9 +135,13 @@ Add I915_CONTEXT_ENGINES_EXT_PARALLEL_SUBMIT and drm_i915_context_engines_parallel_submit to the uAPI to implement this extension. +.. c:namespace-push:: rfc + .. kernel-doc:: include/uapi/drm/i915_drm.h :functions: i915_context_engines_parallel_submit +.. c:namespace-pop:: + Extend execbuf2 IOCTL to support submitting N BBs in a single IOCTL ------------------------------------------------------------------- Contexts that have been configured with the 'set_parallel' extension can only diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 68bdafa0284f..139980487ccf 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -49,14 +49,18 @@ converted over. Modern compositors like Wayland or Surfaceflinger on Android really want an atomic modeset interface, so this is all about the bright future. -There is a conversion guide for atomic and all you need is a GPU for a -non-converted driver (again virtual HW drivers for KVM are still all -suitable). +There is a conversion guide for atomic [1]_ and all you need is a GPU for a +non-converted driver. The "Atomic mode setting design overview" series [2]_ +[3]_ at LWN.net can also be helpful. As part of this drivers also need to convert to universal plane (which means exposing primary & cursor as proper plane objects). But that's much easier to do by directly using the new atomic helper driver callbacks. + .. [1] https://blog.ffwll.ch/2014/11/atomic-modeset-support-for-kms-drivers.html + .. [2] https://lwn.net/Articles/653071/ + .. [3] https://lwn.net/Articles/653466/ + Contact: Daniel Vetter, respective driver maintainers Level: Advanced @@ -319,15 +323,6 @@ Contact: Daniel Vetter, Noralf Tronnes Level: Advanced -struct drm_gem_object_funcs ---------------------------- - -GEM objects can now have a function table instead of having the callbacks on the -DRM driver struct. This is now the preferred way. Callbacks in drivers have been -converted, except for struct drm_driver.gem_prime_mmap. - -Level: Intermediate - connector register/unregister fixes ----------------------------------- @@ -452,6 +447,44 @@ Contact: Thomas Zimmermann <tzimmermann@suse.de> Level: Starter +Remove driver dependencies on FB_DEVICE +--------------------------------------- + +A number of fbdev drivers provide attributes via sysfs and therefore depend +on CONFIG_FB_DEVICE to be selected. Review each driver and attempt to make +any dependencies on CONFIG_FB_DEVICE optional. At the minimum, the respective +code in the driver could be conditionalized via ifdef CONFIG_FB_DEVICE. Not +all drivers might be able to drop CONFIG_FB_DEVICE. + +Contact: Thomas Zimmermann <tzimmermann@suse.de> + +Level: Starter + +Clean up checks for already prepared/enabled in panels +------------------------------------------------------ + +In a whole pile of panel drivers, we have code to make the +prepare/unprepare/enable/disable callbacks behave as no-ops if they've already +been called. To get some idea of the duplicated code, try:: + + git grep 'if.*>prepared' -- drivers/gpu/drm/panel + git grep 'if.*>enabled' -- drivers/gpu/drm/panel + +In the patch ("drm/panel: Check for already prepared/enabled in drm_panel") +we've moved this check to the core. Now we can most definitely remove the +check from the individual panels and save a pile of code. + +In adition to removing the check from the individual panels, it is believed +that even the core shouldn't need this check and that should be considered +an error if other code ever relies on this check. The check in the core +currently prints a warning whenever something is relying on this check with +dev_warn(). After a little while, we likely want to promote this to a +WARN(1) to help encourage folks not to rely on this behavior. + +Contact: Douglas Anderson <dianders@chromium.org> + +Level: Starter/Intermediate + Core refactorings ================= @@ -749,16 +782,16 @@ existing hardware. The new driver's call-back functions are filled from existing fbdev code. More complex fbdev drivers can be refactored step-by-step into a DRM -driver with the help of the DRM fbconv helpers. [1] These helpers provide +driver with the help of the DRM fbconv helpers [4]_. These helpers provide the transition layer between the DRM core infrastructure and the fbdev driver interface. Create a new DRM driver on top of the fbconv helpers, copy over the fbdev driver, and hook it up to the DRM code. Examples for -several fbdev drivers are available at [1] and a tutorial of this process -available at [2]. The result is a primitive DRM driver that can run X11 -and Weston. +several fbdev drivers are available in Thomas Zimmermann's fbconv tree +[4]_, as well as a tutorial of this process [5]_. The result is a primitive +DRM driver that can run X11 and Weston. - - [1] https://gitlab.freedesktop.org/tzimmermann/linux/tree/fbconv - - [2] https://gitlab.freedesktop.org/tzimmermann/linux/blob/fbconv/drivers/gpu/drm/drm_fbconv_helper.c + .. [4] https://gitlab.freedesktop.org/tzimmermann/linux/tree/fbconv + .. [5] https://gitlab.freedesktop.org/tzimmermann/linux/blob/fbconv/drivers/gpu/drm/drm_fbconv_helper.c Contact: Thomas Zimmermann <tzimmermann@suse.de> |