diff options
Diffstat (limited to 'Documentation')
6 files changed, 56 insertions, 28 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues index 906ff3ca928a..5bff64d256c2 100644 --- a/Documentation/ABI/testing/sysfs-class-net-queues +++ b/Documentation/ABI/testing/sysfs-class-net-queues @@ -1,4 +1,4 @@ -What: /sys/class/<iface>/queues/rx-<queue>/rps_cpus +What: /sys/class/net/<iface>/queues/rx-<queue>/rps_cpus Date: March 2010 KernelVersion: 2.6.35 Contact: netdev@vger.kernel.org @@ -8,7 +8,7 @@ Description: network device queue. Possible values depend on the number of available CPU(s) in the system. -What: /sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt +What: /sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt Date: April 2010 KernelVersion: 2.6.35 Contact: netdev@vger.kernel.org @@ -16,7 +16,7 @@ Description: Number of Receive Packet Steering flows being currently processed by this particular network device receive queue. -What: /sys/class/<iface>/queues/tx-<queue>/tx_timeout +What: /sys/class/net/<iface>/queues/tx-<queue>/tx_timeout Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -24,7 +24,7 @@ Description: Indicates the number of transmit timeout events seen by this network interface transmit queue. -What: /sys/class/<iface>/queues/tx-<queue>/tx_maxrate +What: /sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate Date: March 2015 KernelVersion: 4.1 Contact: netdev@vger.kernel.org @@ -32,7 +32,7 @@ Description: A Mbps max-rate set for the queue, a value of zero means disabled, default is disabled. -What: /sys/class/<iface>/queues/tx-<queue>/xps_cpus +What: /sys/class/net/<iface>/queues/tx-<queue>/xps_cpus Date: November 2010 KernelVersion: 2.6.38 Contact: netdev@vger.kernel.org @@ -42,7 +42,7 @@ Description: network device transmit queue. Possible values depend on the number of available CPU(s) in the system. -What: /sys/class/<iface>/queues/tx-<queue>/xps_rxqs +What: /sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs Date: June 2018 KernelVersion: 4.18.0 Contact: netdev@vger.kernel.org @@ -53,7 +53,7 @@ Description: number of available receive queue(s) in the network device. Default is disabled. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -62,7 +62,7 @@ Description: of this particular network device transmit queue. Default value is 1000. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -70,7 +70,7 @@ Description: Indicates the number of bytes (objects) in flight on this network device transmit queue. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -79,7 +79,7 @@ Description: on this network device transmit queue. This value is clamped to be within the bounds defined by limit_max and limit_min. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -88,7 +88,7 @@ Description: queued on this network device transmit queue. See include/linux/dynamic_queue_limits.h for the default value. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon index 8d7d8f05f6cd..92fe7c5c5ac1 100644 --- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon +++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon @@ -1,4 +1,4 @@ -What: /sys/devices/.../hwmon/hwmon<i>/in0_input +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/in0_input Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -6,7 +6,7 @@ Description: RO. Current Voltage in millivolt. Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_max +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -20,7 +20,7 @@ Description: RW. Card reactive sustained (PL1/Tau) power limit in microwatts. Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_rated_max +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_rated_max Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -28,7 +28,7 @@ Description: RO. Card default power limit (default TDP setting). Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_max_interval +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max_interval Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -37,7 +37,7 @@ Description: RW. Sustained power limit interval (Tau in PL1/Tau) in Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_crit +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_crit Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -50,7 +50,7 @@ Description: RW. Card reactive critical (I1) power limit in microwatts. Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/curr1_crit +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/curr1_crit Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -63,7 +63,7 @@ Description: RW. Card reactive critical (I1) power limit in milliamperes. Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/energy1_input +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/energy1_input Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org diff --git a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon index 8c321bc9dc04..023fd82de3f7 100644 --- a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon +++ b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon @@ -1,4 +1,4 @@ -What: /sys/devices/.../hwmon/hwmon<i>/power1_max +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max Date: September 2023 KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org @@ -12,7 +12,7 @@ Description: RW. Card reactive sustained (PL1) power limit in microwatts. Only supported for particular Intel xe graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_rated_max +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_rated_max Date: September 2023 KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org @@ -20,7 +20,7 @@ Description: RO. Card default power limit (default TDP setting). Only supported for particular Intel xe graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_crit +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_crit Date: September 2023 KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org @@ -33,7 +33,7 @@ Description: RW. Card reactive critical (I1) power limit in microwatts. Only supported for particular Intel xe graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/curr1_crit +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/curr1_crit Date: September 2023 KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org @@ -44,7 +44,7 @@ Description: RW. Card reactive critical (I1) power limit in milliamperes. the operating frequency if the power averaged over a window exceeds this limit. -What: /sys/devices/.../hwmon/hwmon<i>/in0_input +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/in0_input Date: September 2023 KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org @@ -52,7 +52,7 @@ Description: RO. Current Voltage in millivolt. Only supported for particular Intel xe graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/energy1_input +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/energy1_input Date: September 2023 KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org @@ -60,7 +60,7 @@ Description: RO. Energy input of device in microjoules. Only supported for particular Intel xe graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_max_interval +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max_interval Date: October 2023 KernelVersion: 6.6 Contact: intel-xe@lists.freedesktop.org diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index a9efab50eed8..22955d56b379 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -671,8 +671,23 @@ Testing Static Functions ------------------------ If we do not want to expose functions or variables for testing, one option is to -conditionally ``#include`` the test file at the end of your .c file. For -example: +conditionally export the used symbol. For example: + +.. code-block:: c + + /* In my_file.c */ + + VISIBLE_IF_KUNIT int do_interesting_thing(); + EXPORT_SYMBOL_IF_KUNIT(do_interesting_thing); + + /* In my_file.h */ + + #if IS_ENABLED(CONFIG_KUNIT) + int do_interesting_thing(void); + #endif + +Alternatively, you could conditionally ``#include`` the test file at the end of +your .c file. For example: .. code-block:: c diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml index 8108c564dd78..aa32dc950e72 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml @@ -22,6 +22,7 @@ properties: - const: allwinner,sun6i-a31-spdif - const: allwinner,sun8i-h3-spdif - const: allwinner,sun50i-h6-spdif + - const: allwinner,sun50i-h616-spdif - items: - const: allwinner,sun8i-a83t-spdif - const: allwinner,sun8i-h3-spdif @@ -62,6 +63,8 @@ allOf: enum: - allwinner,sun6i-a31-spdif - allwinner,sun8i-h3-spdif + - allwinner,sun50i-h6-spdif + - allwinner,sun50i-h616-spdif then: required: @@ -73,7 +76,7 @@ allOf: contains: enum: - allwinner,sun8i-h3-spdif - - allwinner,sun50i-h6-spdif + - allwinner,sun50i-h616-spdif then: properties: diff --git a/Documentation/netlink/specs/rt_link.yaml b/Documentation/netlink/specs/rt_link.yaml index 1ad01d52a863..8e4d19adee8c 100644 --- a/Documentation/netlink/specs/rt_link.yaml +++ b/Documentation/netlink/specs/rt_link.yaml @@ -942,6 +942,10 @@ attribute-sets: - name: gro-ipv4-max-size type: u32 + - + name: dpll-pin + type: nest + nested-attributes: link-dpll-pin-attrs - name: af-spec-attrs attributes: @@ -1627,6 +1631,12 @@ attribute-sets: - name: used type: u8 + - + name: link-dpll-pin-attrs + attributes: + - + name: id + type: u32 sub-messages: - |