diff options
Diffstat (limited to 'Documentation')
182 files changed, 552 insertions, 605 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes index 05820365f1ec..4cdba3477176 100644 --- a/Documentation/ABI/testing/sysfs-class-firmware-attributes +++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes @@ -116,7 +116,7 @@ Description: <value>[ForceIf:<attribute>=<value>] <value>[ForceIfNot:<attribute>=<value>] - For example: + For example:: LegacyOrom/dell_value_modifier has value: Disabled[ForceIf:SecureBoot=Enabled] @@ -212,7 +212,7 @@ Description: the next boot. Lenovo specific class extensions - ------------------------------ + -------------------------------- On Lenovo systems the following additional settings are available: @@ -246,9 +246,7 @@ Description: that is being referenced (e.g hdd0, hdd1 etc) This attribute defaults to device 0. - certificate: - signature: - save_signature: + certificate, signature, save_signature: These attributes are used for certificate based authentication. This is used in conjunction with a signing server as an alternative to password based authentication. @@ -257,22 +255,27 @@ Description: The attributes can be displayed to check the stored value. Some usage examples: - Installing a certificate to enable feature: - echo <supervisor password > authentication/Admin/current_password - echo <signed certificate> > authentication/Admin/certificate - Updating the installed certificate: - echo <signature> > authentication/Admin/signature - echo <signed certificate> > authentication/Admin/certificate + Installing a certificate to enable feature:: + + echo "supervisor password" > authentication/Admin/current_password + echo "signed certificate" > authentication/Admin/certificate + + Updating the installed certificate:: + + echo "signature" > authentication/Admin/signature + echo "signed certificate" > authentication/Admin/certificate - Removing the installed certificate: - echo <signature> > authentication/Admin/signature - echo '' > authentication/Admin/certificate + Removing the installed certificate:: - Changing a BIOS setting: - echo <signature> > authentication/Admin/signature - echo <save signature> > authentication/Admin/save_signature - echo Enable > attribute/PasswordBeep/current_value + echo "signature" > authentication/Admin/signature + echo "" > authentication/Admin/certificate + + Changing a BIOS setting:: + + echo "signature" > authentication/Admin/signature + echo "save signature" > authentication/Admin/save_signature + echo Enable > attribute/PasswordBeep/current_value You cannot enable certificate authentication if a supervisor password has not been set. @@ -288,9 +291,10 @@ Description: certificate_to_password: Write only attribute used to switch from certificate based authentication back to password based. - Usage: - echo <signature> > authentication/Admin/signature - echo <password> > authentication/Admin/certificate_to_password + Usage:: + + echo "signature" > authentication/Admin/signature + echo "password" > authentication/Admin/certificate_to_password What: /sys/class/firmware-attributes/*/attributes/pending_reboot @@ -345,7 +349,7 @@ Description: # echo "factory" > /sys/class/firmware-attributes/*/device/attributes/reset_bios # cat /sys/class/firmware-attributes/*/device/attributes/reset_bios - # builtinsafe lastknowngood [factory] custom + builtinsafe lastknowngood [factory] custom Note that any changes to this attribute requires a reboot for changes to take effect. diff --git a/Documentation/ABI/testing/sysfs-driver-intel_sdsi b/Documentation/ABI/testing/sysfs-driver-intel_sdsi index ab122125ff9a..96b92c105ec4 100644 --- a/Documentation/ABI/testing/sysfs-driver-intel_sdsi +++ b/Documentation/ABI/testing/sysfs-driver-intel_sdsi @@ -13,17 +13,19 @@ Description: Should the operation fail, one of the following error codes may be returned: + ========== ===== Error Code Cause - ---------- ----- - EIO General mailbox failure. Log may indicate cause. - EBUSY Mailbox is owned by another agent. - EPERM SDSI capability is not enabled in hardware. - EPROTO Failure in mailbox protocol detected by driver. + ========== ===== + EIO General mailbox failure. Log may indicate cause. + EBUSY Mailbox is owned by another agent. + EPERM SDSI capability is not enabled in hardware. + EPROTO Failure in mailbox protocol detected by driver. See log for details. - EOVERFLOW For provision commands, the size of the data + EOVERFLOW For provision commands, the size of the data exceeds what may be written. - ESPIPE Seeking is not allowed. - ETIMEDOUT Failure to complete mailbox transaction in time. + ESPIPE Seeking is not allowed. + ETIMEDOUT Failure to complete mailbox transaction in time. + ========== ===== What: /sys/bus/auxiliary/devices/intel_vsec.sdsi.X/guid Date: Feb 2022 diff --git a/Documentation/ABI/testing/sysfs-fs-erofs b/Documentation/ABI/testing/sysfs-fs-erofs index 05482374a741..bb4681a01811 100644 --- a/Documentation/ABI/testing/sysfs-fs-erofs +++ b/Documentation/ABI/testing/sysfs-fs-erofs @@ -9,8 +9,9 @@ Description: Shows all enabled kernel features. What: /sys/fs/erofs/<disk>/sync_decompress Date: November 2021 Contact: "Huang Jianan" <huangjianan@oppo.com> -Description: Control strategy of sync decompression +Description: Control strategy of sync decompression: + - 0 (default, auto): enable for readpage, and enable for - readahead on atomic contexts only, + readahead on atomic contexts only. - 1 (force on): enable for readpage and readahead. - 2 (force off): disable for all situations. diff --git a/Documentation/arm64/memory-tagging-extension.rst b/Documentation/arm64/memory-tagging-extension.rst index dd27f78d7608..dbae47bba25e 100644 --- a/Documentation/arm64/memory-tagging-extension.rst +++ b/Documentation/arm64/memory-tagging-extension.rst @@ -228,10 +228,10 @@ Core dump support ----------------- The allocation tags for user memory mapped with ``PROT_MTE`` are dumped -in the core file as additional ``PT_ARM_MEMTAG_MTE`` segments. The +in the core file as additional ``PT_AARCH64_MEMTAG_MTE`` segments. The program header for such segment is defined as: -:``p_type``: ``PT_ARM_MEMTAG_MTE`` +:``p_type``: ``PT_AARCH64_MEMTAG_MTE`` :``p_flags``: 0 :``p_offset``: segment file offset :``p_vaddr``: segment virtual address, same as the corresponding diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index 466cb9e89047..d27db84d585e 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -189,6 +189,9 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | Qualcomm Tech. | Kryo4xx Silver | N/A | ARM64_ERRATUM_1024718 | +----------------+-----------------+-----------------+-----------------------------+ +| Qualcomm Tech. | Kryo4xx Gold | N/A | ARM64_ERRATUM_1286807 | ++----------------+-----------------+-----------------+-----------------------------+ + +----------------+-----------------+-----------------+-----------------------------+ | Fujitsu | A64FX | E#010001 | FUJITSU_ERRATUM_010001 | +----------------+-----------------+-----------------+-----------------------------+ diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst index ad168d16968f..867a4bba6bf6 100644 --- a/Documentation/dev-tools/kunit/start.rst +++ b/Documentation/dev-tools/kunit/start.rst @@ -41,13 +41,18 @@ or ``VFAT_FS``. To run ``FAT_KUNIT_TEST``, the ``.kunitconfig`` has: CONFIG_MSDOS_FS=y CONFIG_FAT_KUNIT_TEST=y -1. A good starting point for the ``.kunitconfig``, is the KUnit default - config. Run the command: +1. A good starting point for the ``.kunitconfig`` is the KUnit default config. + You can generate it by running: .. code-block:: bash cd $PATH_TO_LINUX_REPO - cp tools/testing/kunit/configs/default.config .kunitconfig + tools/testing/kunit/kunit.py config + cat .kunit/.kunitconfig + +.. note :: + ``.kunitconfig`` lives in the ``--build_dir`` used by kunit.py, which is + ``.kunit`` by default. .. note :: You may want to remove CONFIG_KUNIT_ALL_TESTS from the ``.kunitconfig`` as diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml index 0afec83cc723..564ae6aaccf7 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -14,7 +14,6 @@ properties: compatible: enum: - nvidia,tegra20-pmc - - nvidia,tegra20-pmc - nvidia,tegra30-pmc - nvidia,tegra114-pmc - nvidia,tegra124-pmc diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.yaml b/Documentation/devicetree/bindings/bus/ti-sysc.yaml index bd40213302da..fced4082b047 100644 --- a/Documentation/devicetree/bindings/bus/ti-sysc.yaml +++ b/Documentation/devicetree/bindings/bus/ti-sysc.yaml @@ -35,7 +35,6 @@ properties: - items: - enum: - ti,sysc-omap2 - - ti,sysc-omap2 - ti,sysc-omap4 - ti,sysc-omap4-simple - ti,sysc-omap2-timer diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml index 625f573a7b90..458c7645ee68 100644 --- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml @@ -55,8 +55,6 @@ allOf: then: properties: clocks: - minItems: 7 - maxItems: 7 items: - description: 32k osc - description: 25m osc @@ -66,8 +64,6 @@ allOf: - description: ext3 clock input - description: ext4 clock input clock-names: - minItems: 7 - maxItems: 7 items: - const: ckil - const: osc_25m diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml index 0c15afa2214c..016a4f378b9b 100644 --- a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml +++ b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml @@ -22,7 +22,16 @@ properties: const: microchip,mpfs-clkcfg reg: - maxItems: 1 + items: + - description: | + clock config registers: + These registers contain enable, reset & divider tables for the, cpu, + axi, ahb and rtc/mtimer reference clocks as well as enable and reset + for the peripheral clocks. + - description: | + mss pll dri registers: + Block of registers responsible for dynamic reconfiguration of the mss + pll clocks: maxItems: 1 @@ -51,7 +60,7 @@ examples: #size-cells = <2>; clkcfg: clock-controller@20002000 { compatible = "microchip,mpfs-clkcfg"; - reg = <0x0 0x20002000 0x0 0x1000>; + reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; clocks = <&ref>; #clock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml index f14f1d39da36..d819dfaafff9 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml @@ -8,7 +8,7 @@ title: Samsung Exynos SoC Audio SubSystem clock controller maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml index 4e8062860986..0589a63e273a 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml @@ -8,7 +8,7 @@ title: Samsung Exynos SoC clock controller maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml index 64d027dbe3b2..c98eff64f2b5 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml @@ -8,7 +8,7 @@ title: Samsung SoC external/osc/XXTI/XusbXTI clock maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml index 1ed64add4355..b644bbd0df38 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml @@ -8,7 +8,7 @@ title: Samsung Exynos4412 SoC ISP clock controller maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml index a3fac5c6809d..b05f83533e3d 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml @@ -8,7 +8,7 @@ title: Samsung Exynos5260 SoC clock controller maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml index 032862e9f55b..b737c9d35a1c 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml @@ -8,7 +8,7 @@ title: Samsung Exynos5410 SoC clock controller maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml index edd1b4ac4334..3f9326e09f79 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml @@ -8,7 +8,7 @@ title: Samsung Exynos5433 SoC clock controller maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml index 599baf0b7231..c137c6744ef9 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml @@ -8,7 +8,7 @@ title: Samsung Exynos7 SoC clock controller maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml index 7e5a9cac2fd2..5073e569a47f 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml @@ -9,7 +9,7 @@ title: Samsung Exynos7885 SoC clock controller maintainers: - Dávid Virág <virag.david003@gmail.com> - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml index 80ba60838f2b..aa11815ad3a3 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml @@ -9,7 +9,7 @@ title: Samsung Exynos850 SoC clock controller maintainers: - Sam Protsenko <semen.protsenko@linaro.org> - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml index 1410c51e0e7d..9248bfc16d48 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S2M and S5M family clock generator block maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml index ae8f8fc93233..2659854ea1c0 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml @@ -8,7 +8,7 @@ title: Samsung S5Pv210 SoC Audio SubSystem clock controller maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml index dcb29a2d1159..67a33665cf00 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml @@ -8,7 +8,7 @@ title: Samsung S5P6442/S5PC110/S5PV210 SoC clock controller maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml index d318fccf78f1..2bdd05af6079 100644 --- a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml +++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml @@ -8,7 +8,7 @@ title: Samsung Exynos NoC (Network on Chip) Probe maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | The Samsung Exynos542x SoC has a NoC (Network on Chip) Probe for NoC bus. diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml index c9a8cb5fd555..e300df4b47f3 100644 --- a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml +++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml @@ -8,7 +8,7 @@ title: Samsung Exynos SoC PPMU (Platform Performance Monitoring Unit) maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml index 62c3bd4cb28d..7257fd0ae4da 100644 --- a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml @@ -51,7 +51,6 @@ properties: Video port for MIPI DPI output (panel or connector). required: - - port@0 - port@1 required: diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml index a51baf8a4c76..bb9dbfb9beaf 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml @@ -95,7 +95,6 @@ then: properties: clocks: minItems: 1 - maxItems: 4 items: - description: Functional clock - description: EXTAL input clock @@ -104,7 +103,6 @@ then: clock-names: minItems: 1 - maxItems: 4 items: - const: fck # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. @@ -128,12 +126,10 @@ then: else: properties: clocks: - maxItems: 1 items: - description: Functional clock clock-names: - maxItems: 1 items: - const: fck diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml index 5216c27fc0ad..a412a1da950f 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml @@ -39,7 +39,6 @@ properties: Video port for MIPI DPI output (panel or connector). required: - - port@0 - port@1 required: diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml index d31483a78eab..6fb7e321f011 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml @@ -160,7 +160,7 @@ examples: mdss: mdss@5e00000 { #address-cells = <1>; #size-cells = <1>; - compatible = "qcom,qcm2290-mdss", "qcom,mdss"; + compatible = "qcom,qcm2290-mdss"; reg = <0x05e00000 0x1000>; reg-names = "mdss"; power-domains = <&dispcc MDSS_GDSC>; @@ -180,7 +180,7 @@ examples: <&apps_smmu 0x421 0x0>; ranges; - mdss_mdp: mdp@5e01000 { + mdss_mdp: display-controller@5e01000 { compatible = "qcom,qcm2290-dpu"; reg = <0x05e01000 0x8f000>, <0x05eb0000 0x2008>; diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml index f29789994b18..c2df8d28aaf5 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -83,6 +83,8 @@ properties: required: - compatible - reg + - width-mm + - height-mm - panel-timing unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml index 9bf592dc3033..7749de95ee40 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -71,78 +71,72 @@ properties: hfront-porch: description: Horizontal front porch panel timing + $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - maxItems: 1 + - maxItems: 1 items: description: typical number of pixels - - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 3 + - minItems: 3 maxItems: 3 items: description: min, typ, max number of pixels hback-porch: description: Horizontal back porch timing + $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - maxItems: 1 + - maxItems: 1 items: description: typical number of pixels - - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 3 + - minItems: 3 maxItems: 3 items: description: min, typ, max number of pixels hsync-len: description: Horizontal sync length panel timing + $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - maxItems: 1 + - maxItems: 1 items: description: typical number of pixels - - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 3 + - minItems: 3 maxItems: 3 items: description: min, typ, max number of pixels vfront-porch: description: Vertical front porch panel timing + $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - maxItems: 1 + - maxItems: 1 items: description: typical number of lines - - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 3 + - minItems: 3 maxItems: 3 items: description: min, typ, max number of lines vback-porch: description: Vertical back porch panel timing + $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - maxItems: 1 + - maxItems: 1 items: description: typical number of lines - - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 3 + - minItems: 3 maxItems: 3 items: description: min, typ, max number of lines vsync-len: description: Vertical sync length panel timing + $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - maxItems: 1 + - maxItems: 1 items: description: typical number of lines - - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 3 + - minItems: 3 maxItems: 3 items: description: min, typ, max number of lines diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml index 56cedcd6d576..b3e588022082 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml @@ -109,7 +109,6 @@ allOf: properties: clocks: minItems: 1 - maxItems: 3 items: - description: Functional clock - description: DU_DOTCLKIN0 input clock @@ -117,7 +116,6 @@ allOf: clock-names: minItems: 1 - maxItems: 3 items: - const: du.0 - pattern: '^dclkin\.[01]$' @@ -159,7 +157,6 @@ allOf: properties: clocks: minItems: 2 - maxItems: 4 items: - description: Functional clock for DU0 - description: Functional clock for DU1 @@ -168,7 +165,6 @@ allOf: clock-names: minItems: 2 - maxItems: 4 items: - const: du.0 - const: du.1 @@ -216,7 +212,6 @@ allOf: properties: clocks: minItems: 2 - maxItems: 4 items: - description: Functional clock for DU0 - description: Functional clock for DU1 @@ -225,7 +220,6 @@ allOf: clock-names: minItems: 2 - maxItems: 4 items: - const: du.0 - const: du.1 @@ -271,7 +265,6 @@ allOf: properties: clocks: minItems: 2 - maxItems: 4 items: - description: Functional clock for DU0 - description: Functional clock for DU1 @@ -280,7 +273,6 @@ allOf: clock-names: minItems: 2 - maxItems: 4 items: - const: du.0 - const: du.1 @@ -327,7 +319,6 @@ allOf: properties: clocks: minItems: 2 - maxItems: 4 items: - description: Functional clock for DU0 - description: Functional clock for DU1 @@ -336,7 +327,6 @@ allOf: clock-names: minItems: 2 - maxItems: 4 items: - const: du.0 - const: du.1 @@ -386,7 +376,6 @@ allOf: properties: clocks: minItems: 3 - maxItems: 6 items: - description: Functional clock for DU0 - description: Functional clock for DU1 @@ -397,7 +386,6 @@ allOf: clock-names: minItems: 3 - maxItems: 6 items: - const: du.0 - const: du.1 @@ -448,7 +436,6 @@ allOf: properties: clocks: minItems: 4 - maxItems: 8 items: - description: Functional clock for DU0 - description: Functional clock for DU1 @@ -461,7 +448,6 @@ allOf: clock-names: minItems: 4 - maxItems: 8 items: - const: du.0 - const: du.1 @@ -525,7 +511,6 @@ allOf: properties: clocks: minItems: 3 - maxItems: 6 items: - description: Functional clock for DU0 - description: Functional clock for DU1 @@ -536,7 +521,6 @@ allOf: clock-names: minItems: 3 - maxItems: 6 items: - const: du.0 - const: du.1 @@ -596,7 +580,6 @@ allOf: properties: clocks: minItems: 3 - maxItems: 6 items: - description: Functional clock for DU0 - description: Functional clock for DU1 @@ -607,7 +590,6 @@ allOf: clock-names: minItems: 3 - maxItems: 6 items: - const: du.0 - const: du.1 @@ -666,14 +648,12 @@ allOf: properties: clocks: minItems: 1 - maxItems: 2 items: - description: Functional clock for DU0 - description: DU_DOTCLKIN0 input clock clock-names: minItems: 1 - maxItems: 2 items: - const: du.0 - const: dclkin.0 @@ -723,7 +703,6 @@ allOf: properties: clocks: minItems: 2 - maxItems: 4 items: - description: Functional clock for DU0 - description: Functional clock for DU1 @@ -732,7 +711,6 @@ allOf: clock-names: minItems: 2 - maxItems: 4 items: - const: du.0 - const: du.1 @@ -791,7 +769,6 @@ allOf: - description: Functional clock clock-names: - maxItems: 1 items: - const: du.0 diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml index f998a3a5b71f..919734c05c0b 100644 --- a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml @@ -11,7 +11,7 @@ maintainers: - Joonyoung Shim <jy0922.shim@samsung.com> - Seung-Woo Kim <sw0312.kim@samsung.com> - Kyungmin Park <kyungmin.park@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml index cb8e735ce3bd..63379fae3636 100644 --- a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml @@ -11,7 +11,7 @@ maintainers: - Joonyoung Shim <jy0922.shim@samsung.com> - Seung-Woo Kim <sw0312.kim@samsung.com> - Kyungmin Park <kyungmin.park@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml index ba40284ac66f..00e325a19cb1 100644 --- a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml @@ -11,7 +11,7 @@ maintainers: - Joonyoung Shim <jy0922.shim@samsung.com> - Seung-Woo Kim <sw0312.kim@samsung.com> - Kyungmin Park <kyungmin.park@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: Samsung Exynos SoC Mixer is responsible for mixing and blending multiple data diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml index 6f796835ea03..7c37470bd329 100644 --- a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml @@ -11,7 +11,7 @@ maintainers: - Joonyoung Shim <jy0922.shim@samsung.com> - Seung-Woo Kim <sw0312.kim@samsung.com> - Kyungmin Park <kyungmin.park@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | DECON (Display and Enhancement Controller) is the Display Controller for the diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml index 01fccb138ebd..c5c6239c28d0 100644 --- a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml @@ -11,7 +11,7 @@ maintainers: - Joonyoung Shim <jy0922.shim@samsung.com> - Seung-Woo Kim <sw0312.kim@samsung.com> - Kyungmin Park <kyungmin.park@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | MIC (Mobile Image Compressor) resides between DECON and MIPI DSI. MIPI DSI is diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml index afa137d47922..320eedc61a5b 100644 --- a/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml @@ -11,7 +11,7 @@ maintainers: - Joonyoung Shim <jy0922.shim@samsung.com> - Seung-Woo Kim <sw0312.kim@samsung.com> - Kyungmin Park <kyungmin.park@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | DECON (Display and Enhancement Controller) is the Display Controller for the diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml index 9cf5f120d516..c62ea9d22843 100644 --- a/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml +++ b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml @@ -11,7 +11,7 @@ maintainers: - Joonyoung Shim <jy0922.shim@samsung.com> - Seung-Woo Kim <sw0312.kim@samsung.com> - Kyungmin Park <kyungmin.park@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml index e614fe3187bb..d09d79d7406a 100644 --- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml +++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml @@ -29,6 +29,7 @@ properties: interrupts: description: Interrupt lines for each GPI instance + minItems: 1 maxItems: 13 "#dma-cells": diff --git a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml index f9ffe3d6f957..128960545640 100644 --- a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml +++ b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml @@ -8,7 +8,7 @@ title: Maxim MAX77843 MicroUSB and Companion Power Management IC Extcon maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX77843 MicroUSB @@ -25,7 +25,7 @@ properties: $ref: /schemas/connector/usb-connector.yaml# ports: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/properties/ports description: Any connector to the data bus of this controller should be modelled using the OF graph bindings specified diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 4d6bfae0653c..85f8d4764740 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -20,6 +20,7 @@ properties: - mediatek,mt8183-mali - realtek,rtd1619-mali - renesas,r9a07g044-mali + - renesas,r9a07g054-mali - rockchip,px30-mali - rockchip,rk3568-mali - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable @@ -109,7 +110,9 @@ allOf: properties: compatible: contains: - const: renesas,r9a07g044-mali + enum: + - renesas,r9a07g044-mali + - renesas,r9a07g054-mali then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml index 4b5851c326f7..b1a4c235376e 100644 --- a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml +++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: LTC4151 High Voltage I2C Current and Voltage Monitor maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml index c42051f8a191..028d6e570131 100644 --- a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml +++ b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip MCP3021 A/D converter maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml index 4669217d01e1..80df7182ea28 100644 --- a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml +++ b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Sensirion SHT15 humidity and temperature sensor maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml index d3eff4fac107..c5a889e3e27b 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TMP102 temperature sensor maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml index eda55bbc172d..dcbc6fbc3b48 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TMP108 temperature sensor maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml index 36f649938fb7..a6f1fa75a67c 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml @@ -58,10 +58,9 @@ patternProperties: description: | The value (two's complement) to be programmed in the channel specific N correction register. For remote channels only. - $ref: /schemas/types.yaml#/definitions/uint32 - items: - minimum: 0 - maximum: 255 + $ref: /schemas/types.yaml#/definitions/int32 + minimum: -128 + maximum: 127 required: - reg diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml index 801ca9ba7d34..e7493e25a7d2 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml @@ -58,9 +58,8 @@ patternProperties: The value (two's complement) to be programmed in the channel specific N correction register. For remote channels only. $ref: /schemas/types.yaml#/definitions/int32 - items: - minimum: -128 - maximum: 127 + minimum: -128 + maximum: 127 required: - reg diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml index 19874e8b73b9..3e52a0db6c41 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung's High Speed I2C controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | The Samsung's High Speed I2C controller is used to interface with I2C devices diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml index 84051b0129c2..c26230518957 100644 --- a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S3C/S5P/Exynos SoC I2C Controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml index cf711082ad7d..666414a9c0de 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml @@ -98,6 +98,7 @@ allOf: - ti,adc121s - ti,ads7866 - ti,ads7868 + then: required: - vcc-supply # Devices with a vref diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 4d6074518b5c..fa8da42cb1e6 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -138,7 +138,6 @@ allOf: - const: bus - const: adc minItems: 1 - maxItems: 2 interrupts: items: @@ -170,7 +169,6 @@ allOf: - const: bus - const: adc minItems: 1 - maxItems: 2 interrupts: items: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 7c260f209687..92f9472a77ae 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -108,9 +108,7 @@ patternProperties: - [1-5]: order 1 to 5. For audio purpose it is recommended to use order 3 to 5. $ref: /schemas/types.yaml#/definitions/uint32 - items: - minimum: 0 - maximum: 5 + maximum: 5 "#io-channel-cells": const: 1 @@ -174,7 +172,7 @@ patternProperties: contains: const: st,stm32-dfsdm-adc - - then: + then: properties: st,adc-channels: minItems: 1 @@ -206,7 +204,7 @@ patternProperties: contains: const: st,stm32-dfsdm-dmic - - then: + then: properties: st,adc-channels: maxItems: 1 @@ -254,7 +252,7 @@ allOf: contains: const: st,stm32h7-dfsdm - - then: + then: patternProperties: "^filter@[0-9]+$": properties: @@ -269,7 +267,7 @@ allOf: contains: const: st,stm32mp1-dfsdm - - then: + then: patternProperties: "^filter@[0-9]+$": properties: diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml index 0d8fb56f4b09..65f86f26947c 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml @@ -59,9 +59,9 @@ allOf: contains: enum: - adi,ad5371 - then: - required: - - vref2-supply + then: + required: + - vref2-supply examples: - | diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml index 89853b482513..8a676fef8c1d 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml @@ -93,48 +93,48 @@ allOf: - qcom,sdm660-gnoc - qcom,sdm660-snoc - then: - properties: - clock-names: - items: - - const: bus - - const: bus_a - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - - # Child node's properties - patternProperties: - '^interconnect-[a-z0-9]+$': - type: object - description: - snoc-mm is a child of snoc, sharing snoc's register address space. - - properties: - compatible: - enum: - - qcom,msm8939-snoc-mm - - '#interconnect-cells': - const: 1 - - clock-names: - items: - - const: bus - - const: bus_a - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - - required: - - compatible - - '#interconnect-cells' - - clock-names - - clocks + then: + properties: + clock-names: + items: + - const: bus + - const: bus_a + + clocks: + items: + - description: Bus Clock + - description: Bus A Clock + + # Child node's properties + patternProperties: + '^interconnect-[a-z0-9]+$': + type: object + description: + snoc-mm is a child of snoc, sharing snoc's register address space. + + properties: + compatible: + enum: + - qcom,msm8939-snoc-mm + + '#interconnect-cells': + const: 1 + + clock-names: + items: + - const: bus + - const: bus_a + + clocks: + items: + - description: Bus Clock + - description: Bus A Clock + + required: + - compatible + - '#interconnect-cells' + - clock-names + - clocks - if: properties: diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml index 372ccbfae771..5a583bf3dbc1 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml @@ -7,10 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Marvell MMP/Orion Interrupt controller bindings maintainers: - - Thomas Gleixner <tglx@linutronix.de> - - Jason Cooper <jason@lakedaemon.net> - - Marc Zyngier <maz@kernel.org> - - Rob Herring <robh+dt@kernel.org> + - Andrew Lunn <andrew@lunn.ch> + - Gregory Clement <gregory.clement@bootlin.com> allOf: - if: diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml index d631b7589d50..72456a07dac9 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos SoC Interrupt Combiner Controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | Samsung's Exynos4 architecture includes a interrupt combiner controller which diff --git a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml index b2fe6eb89389..10f95bf1d666 100644 --- a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml +++ b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml @@ -43,8 +43,6 @@ patternProperties: - 4 # LED output FLASH1 - 5 # LED output FLASH2 -unevaluatedProperties: false - required: - compatible - "#address-cells" diff --git a/Documentation/devicetree/bindings/leds/maxim,max77693.yaml b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml index 86a0005cf156..e27f57bb52ae 100644 --- a/Documentation/devicetree/bindings/leds/maxim,max77693.yaml +++ b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml index 36781ee4617f..c9d5adbc8c4a 100644 --- a/Documentation/devicetree/bindings/media/coda.yaml +++ b/Documentation/devicetree/bindings/media/coda.yaml @@ -65,7 +65,6 @@ properties: iram: $ref: /schemas/types.yaml#/definitions/phandle description: phandle pointing to the SRAM device node - maxItems: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml index 9b179bb44dfb..aa55ca65d6ed 100644 --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml @@ -63,13 +63,11 @@ properties: mediatek,vpu: $ref: /schemas/types.yaml#/definitions/phandle - maxItems: 1 description: Describes point to vpu. mediatek,scp: $ref: /schemas/types.yaml#/definitions/phandle - maxItems: 1 description: Describes point to scp. diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml index e7b65a91c92c..deb5b657a2d5 100644 --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml @@ -55,13 +55,11 @@ properties: mediatek,vpu: $ref: /schemas/types.yaml#/definitions/phandle - maxItems: 1 description: Describes point to vpu. mediatek,scp: $ref: /schemas/types.yaml#/definitions/phandle - maxItems: 1 description: Describes point to scp. @@ -106,7 +104,6 @@ allOf: enum: - mediatek,mt8173-vcodec-enc - mediatek,mt8192-vcodec-enc - - mediatek,mt8173-vcodec-enc then: properties: diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml index 7687be0f50aa..c73bf2352aca 100644 --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml @@ -61,7 +61,6 @@ properties: mediatek,scp: $ref: /schemas/types.yaml#/definitions/phandle - maxItems: 1 description: | The node of system control processor (SCP), using the remoteproc & rpmsg framework. diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml index 769f13250047..08cbdcddfead 100644 --- a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: DDR PHY Front End (DPFE) for Broadcom STB maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Markus Mayer <mmayer@broadcom.com> properties: diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml index f3e62ee07126..1daa66592477 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: LPDDR2 SDRAM AC timing parameters for a given speed-bin maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml index dd2141cad866..9d78f140609b 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: LPDDR2 SDRAM compliant to JEDEC JESD209-2 maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml index 97c3e988af5f..5c6512c1e1e3 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: LPDDR3 SDRAM AC timing parameters for a given speed-bin maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml index c542f32c39fa..48908a19473c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: LPDDR3 SDRAM compliant to JEDEC JESD209-3 maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml index 14a6bc8f421f..9249624c4fa0 100644 --- a/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml @@ -8,7 +8,7 @@ title: Marvell MVEBU SDRAM controller maintainers: - Jan Luebbe <jlu@pengutronix.de> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml index 9566b3421f03..0c511ab906bf 100644 --- a/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Atheros AR7xxx/AR9xxx DDR controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | The DDR controller of the AR7xxx and AR9xxx families provides an interface to diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml index 2b18cef99511..514b2c5f8858 100644 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: H8/300 bus controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Yoshinori Sato <ysato@users.sourceforge.jp> properties: diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml index f152243f6b18..098348b2b815 100644 --- a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml @@ -9,7 +9,7 @@ title: | Controller device maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Lukasz Luba <lukasz.luba@arm.com> description: | diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml b/Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml index fb7ae38a9c86..f46e95704f53 100644 --- a/Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Synopsys IntelliDDR Multi Protocol memory controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Manish Narani <manish.narani@xilinx.com> - Michal Simek <michal.simek@xilinx.com> @@ -24,9 +24,9 @@ description: | properties: compatible: enum: + - snps,ddrc-3.80a - xlnx,zynq-ddrc-a05 - xlnx,zynqmp-ddrc-2.40a - - snps,ddrc-3.80a interrupts: maxItems: 1 @@ -43,7 +43,9 @@ allOf: properties: compatible: contains: - const: xlnx,zynqmp-ddrc-2.40a + enum: + - snps,ddrc-3.80a + - xlnx,zynqmp-ddrc-2.40a then: required: - interrupts diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml index 9ed51185ff99..382ddab60fbd 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml @@ -8,7 +8,7 @@ title: Texas Instruments da8xx DDR2/mDDR memory controller maintainers: - Bartosz Golaszewski <bgolaszewski@baylibre.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | Documentation: diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt index 692300117c64..9d837535637b 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt @@ -54,7 +54,7 @@ flexcom@f8034000 { clock-names = "spi_clk"; atmel,fifo-size = <32>; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at25f512b"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml index 27870b8760a6..52edd1bf549f 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml index 859655a789c3..d027aabe453b 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml @@ -8,7 +8,7 @@ title: Maxim MAX77686 Power Management IC maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX77686 Power Management diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml index 906101197e11..1b06a77ec798 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml @@ -8,7 +8,7 @@ title: Maxim MAX77693 MicroUSB and Companion Power Management IC maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX77693 MicroUSB diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml index baa1346ac5d5..ad2013900b03 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml @@ -8,7 +8,7 @@ title: Maxim MAX77802 Power Management IC maintainers: - Javier Martinez Canillas <javier@dowhile0.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX77802 Power Management diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml index 61a0f9dcb983..f30f96bbff43 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim MAX77843 MicroUSB and Companion Power Management IC maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX77843 MicroUSB diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml index bae55c98961c..f7bb67d10eff 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos SoC Low Power Audio Subsystem (LPASS) maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> properties: diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml index 017befdf8adb..055dfc337c2f 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S2MPA01 Power Management IC maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml index 771b3f16da96..5ff6546c72b7 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml index 5531718abdf0..10c7b408f33a 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5M8767 Power Management IC maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml index ce64b3498378..fe0270207622 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml @@ -197,25 +197,22 @@ allOf: - nvidia,tegra30-sdhci - nvidia,tegra114-sdhci - nvidia,tegra124-sdhci + then: + properties: clocks: items: - description: module clock - minItems: 1 - maxItems: 1 else: properties: clocks: items: - description: module clock - description: timeout clock - minItems: 2 - maxItems: 2 + clock-names: items: - const: sdhci - const: tmclk - minItems: 2 - maxItems: 2 required: - clock-names diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml index 9d764e654e1d..849aeae319a9 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml @@ -147,8 +147,6 @@ allOf: - description: SoC gpmi io clock - description: SoC gpmi bch apb clock clock-names: - minItems: 2 - maxItems: 2 items: - const: gpmi_io - const: gpmi_bch_apb diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml index 8bad328b184d..51aa89ac7e85 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml @@ -80,8 +80,6 @@ if: then: properties: interrupts: - minItems: 4 - maxItems: 4 items: - description: Error and status IRQ - description: Message object IRQ @@ -91,7 +89,6 @@ then: else: properties: interrupts: - maxItems: 1 items: - description: Error and status IRQ diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml index 8756060895a8..99ee4b5b9346 100644 --- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml +++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml @@ -27,32 +27,25 @@ description: The realtek-mdio driver is an MDIO driver and it must be inserted inside an MDIO node. + The compatible string is only used to identify which (silicon) family the + switch belongs to. Roughly speaking, a family is any set of Realtek switches + whose chip identification register(s) have a common location and semantics. + The different models in a given family can be automatically disambiguated by + parsing the chip identification register(s) according to the given family, + avoiding the need for a unique compatible string for each model. + properties: compatible: enum: - realtek,rtl8365mb - - realtek,rtl8366 - realtek,rtl8366rb - - realtek,rtl8366s - - realtek,rtl8367 - - realtek,rtl8367b - - realtek,rtl8367rb - - realtek,rtl8367s - - realtek,rtl8368s - - realtek,rtl8369 - - realtek,rtl8370 description: | - realtek,rtl8365mb: 4+1 ports - realtek,rtl8366: 5+1 ports - realtek,rtl8366rb: 5+1 ports - realtek,rtl8366s: 5+1 ports - realtek,rtl8367: - realtek,rtl8367b: - realtek,rtl8367rb: 5+2 ports - realtek,rtl8367s: 5+2 ports - realtek,rtl8368s: 8 ports - realtek,rtl8369: 8+1 ports - realtek,rtl8370: 8+2 ports + realtek,rtl8365mb: + Use with models RTL8363NB, RTL8363NB-VB, RTL8363SC, RTL8363SC-VB, + RTL8364NB, RTL8364NB-VB, RTL8365MB, RTL8366SC, RTL8367RB-VB, RTL8367S, + RTL8367SB, RTL8370MB, RTL8310SR + realtek,rtl8366rb: + Use with models RTL8366RB, RTL8366S mdc-gpios: description: GPIO line for the MDC clock line. @@ -335,7 +328,7 @@ examples: #size-cells = <0>; switch@29 { - compatible = "realtek,rtl8367s"; + compatible = "realtek,rtl8365mb"; reg = <29>; reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 817794e56227..4f15463611f8 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -106,6 +106,12 @@ properties: phy-mode: $ref: "#/properties/phy-connection-type" + pcs-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Specifies a reference to a node representing a PCS PHY device on a MDIO + bus to link with an external PHY (phy-handle) if exists. + phy-handle: $ref: /schemas/types.yaml#/definitions/phandle description: diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt index c5ab62c39133..8d157f0295a5 100644 --- a/Documentation/devicetree/bindings/net/micrel.txt +++ b/Documentation/devicetree/bindings/net/micrel.txt @@ -45,20 +45,3 @@ Optional properties: In fiber mode, auto-negotiation is disabled and the PHY can only work in 100base-fx (full and half duplex) modes. - - - lan8814,ignore-ts: If present the PHY will not support timestamping. - - This option acts as check whether Timestamping is supported by - hardware or not. LAN8814 phy support hardware tmestamping. - - - lan8814,latency_rx_10: Configures Latency value of phy in ingress at 10 Mbps. - - - lan8814,latency_tx_10: Configures Latency value of phy in egress at 10 Mbps. - - - lan8814,latency_rx_100: Configures Latency value of phy in ingress at 100 Mbps. - - - lan8814,latency_tx_100: Configures Latency value of phy in egress at 100 Mbps. - - - lan8814,latency_rx_1000: Configures Latency value of phy in ingress at 1000 Mbps. - - - lan8814,latency_tx_1000: Configures Latency value of phy in egress at 1000 Mbps. diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml index 15a45db3899a..1bcaf6ba822c 100644 --- a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml +++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Marvell International Ltd. NCI NFC controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml index 7465aea2e1c0..e381a3c14836 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml +++ b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml @@ -8,7 +8,7 @@ title: NXP Semiconductors NCI NFC controller maintainers: - Charles Gorand <charles.gorand@effinnov.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml index d8ba5a18db98..0509e0166345 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml +++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP Semiconductors PN532 NFC controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml index d520414de463..18b3a7d819df 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml +++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP Semiconductors PN544 NFC Controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml index a6a1bc788d29..ef1155038a2f 100644 --- a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml +++ b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics ST NCI NFC controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml index 4356eacde8aa..8a7274357b46 100644 --- a/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml +++ b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics SAS ST21NFCA NFC controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml index d3bca376039e..963d9531a856 100644 --- a/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml +++ b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics ST95HF NFC controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml index 40da2ac98978..404c8df99364 100644 --- a/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml +++ b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TRF7970A RFID/NFC/15693 Transceiver maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Mark Greer <mgreer@animalcreek.com> properties: diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 2d5248f5b919..36c85eb3dc0d 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -53,20 +53,18 @@ properties: - allwinner,sun8i-r40-gmac - allwinner,sun8i-v3s-emac - allwinner,sun50i-a64-emac - - loongson,ls2k-dwmac - - loongson,ls7a-dwmac - amlogic,meson6-dwmac - amlogic,meson8b-dwmac - amlogic,meson8m2-dwmac - amlogic,meson-gxbb-dwmac - amlogic,meson-axg-dwmac - - loongson,ls2k-dwmac - - loongson,ls7a-dwmac - ingenic,jz4775-mac - ingenic,x1000-mac - ingenic,x1600-mac - ingenic,x1830-mac - ingenic,x2000-mac + - loongson,ls2k-dwmac + - loongson,ls7a-dwmac - rockchip,px30-gmac - rockchip,rk3128-gmac - rockchip,rk3228-gmac diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml index e602761f7b14..b0ebcef6801c 100644 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -13,9 +13,6 @@ description: | This describes the devicetree bindings for AVE ethernet controller implemented on Socionext UniPhier SoCs. -allOf: - - $ref: ethernet-controller.yaml# - properties: compatible: enum: @@ -44,25 +41,13 @@ properties: minItems: 1 maxItems: 4 - clock-names: - oneOf: - - items: # for Pro4 - - const: gio - - const: ether - - const: ether-gb - - const: ether-phy - - const: ether # for others + clock-names: true resets: minItems: 1 maxItems: 2 - reset-names: - oneOf: - - items: # for Pro4 - - const: gio - - const: ether - - const: ether # for others + reset-names: true socionext,syscon-phy-mode: $ref: /schemas/types.yaml#/definitions/phandle-array @@ -78,6 +63,42 @@ properties: $ref: mdio.yaml# unevaluatedProperties: false +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pro4-ave4 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: gio + - const: ether + - const: ether-gb + - const: ether-phy + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: ether + else: + properties: + clocks: + maxItems: 1 + clock-names: + const: ether + resets: + maxItems: 1 + reset-names: + const: ether + required: - compatible - reg @@ -90,7 +111,7 @@ required: - reset-names - mdio -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index dbfca5ee9139..6f44f9516c36 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -56,6 +56,7 @@ if: compatible: contains: const: ti,davinci_mdio +then: required: - bus_freq diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt index b8e4894bc634..1aa4c6006cd0 100644 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt @@ -26,7 +26,8 @@ Required properties: specified, the TX/RX DMA interrupts should be on that node instead, and only the Ethernet core interrupt is optionally specified here. -- phy-handle : Should point to the external phy device. +- phy-handle : Should point to the external phy device if exists. Pointing + this to the PCS/PMA PHY is deprecated and should be avoided. See ethernet.txt file in the same directory. - xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware @@ -68,6 +69,11 @@ Optional properties: required through the core's MDIO interface (i.e. always, unless the PHY is accessed through a different bus). + - pcs-handle: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X + modes, where "pcs-handle" should be used to point + to the PCS/PMA PHY, and "phy-handle" should point to an + external PHY if exists. + Example: axi_ethernet_eth: ethernet@40c00000 { compatible = "xlnx,axi-ethernet-1.00.a"; diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml index 7f01e15fc81c..daf602ac0d0f 100644 --- a/Documentation/devicetree/bindings/pci/apple,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml @@ -142,7 +142,6 @@ examples: device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; reset-gpios = <&pinctrl_ap 152 0>; - max-link-speed = <2>; #address-cells = <3>; #size-cells = <2>; @@ -153,7 +152,6 @@ examples: device_type = "pci"; reg = <0x800 0x0 0x0 0x0 0x0>; reset-gpios = <&pinctrl_ap 153 0>; - max-link-speed = <2>; #address-cells = <3>; #size-cells = <2>; @@ -164,7 +162,6 @@ examples: device_type = "pci"; reg = <0x1000 0x0 0x0 0x0 0x0>; reset-gpios = <&pinctrl_ap 33 0>; - max-link-speed = <1>; #address-cells = <3>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml index cb1aa325336f..435b971dfd9b 100644 --- a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml @@ -102,19 +102,17 @@ if: then: properties: reg: - maxItems: 2 + minItems: 2 + reg-names: - items: - - const: "phy" - - const: "phy-ctrl" + minItems: 2 else: properties: reg: maxItems: 1 + reg-names: maxItems: 1 - items: - - const: "phy" required: - compatible diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml index dfde0eaf66e1..d61585c96e31 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml @@ -275,17 +275,17 @@ allOf: - nvidia,hssquelch-level - nvidia,hsdiscon-level - else: - properties: - clocks: - maxItems: 4 + else: + properties: + clocks: + maxItems: 4 - clock-names: - items: - - const: reg - - const: pll_u - - const: timer - - const: utmi-pads + clock-names: + items: + - const: reg + - const: pll_u + - const: timer + - const: utmi-pads - if: properties: diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml index e23e5590eaa3..0655e485b260 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml @@ -14,24 +14,24 @@ if: compatible: contains: const: qcom,usb-hs-phy-apq8064 - then: - properties: - resets: - maxItems: 1 +then: + properties: + resets: + maxItems: 1 - reset-names: - const: por + reset-names: + const: por - else: - properties: - resets: - minItems: 2 - maxItems: 2 +else: + properties: + resets: + minItems: 2 + maxItems: 2 - reset-names: - items: - - const: phy - - const: por + reset-names: + items: + - const: phy + - const: por properties: compatible: @@ -92,6 +92,8 @@ additionalProperties: false examples: - | otg: usb-controller { + #reset-cells = <1>; + ulpi { phy { compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy"; diff --git a/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml index 838c6d480ce6..b03b2f00cc5b 100644 --- a/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos SoC DisplayPort PHY maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Marek Szyprowski <m.szyprowski@samsung.com> - Sylwester Nawrocki <s.nawrocki@samsung.com> diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml index c61574e10b2a..3e5f035de2e9 100644 --- a/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml @@ -11,7 +11,7 @@ maintainers: - Joonyoung Shim <jy0922.shim@samsung.com> - Seung-Woo Kim <sw0312.kim@samsung.com> - Kyungmin Park <kyungmin.park@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml index 62b39bb46585..8751e559484f 100644 --- a/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos5250 SoC SATA PHY maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Marek Szyprowski <m.szyprowski@samsung.com> - Sylwester Nawrocki <s.nawrocki@samsung.com> diff --git a/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml index 54aa056b224d..415440aaad89 100644 --- a/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5P/Exynos SoC MIPI CSIS/DSIM DPHY maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Marek Szyprowski <m.szyprowski@samsung.com> - Sylwester Nawrocki <s.nawrocki@samsung.com> diff --git a/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml index 056e270a4e88..d9f22a801cbf 100644 --- a/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5P/Exynos SoC USB 2.0 PHY maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Marek Szyprowski <m.szyprowski@samsung.com> - Sylwester Nawrocki <s.nawrocki@samsung.com> diff --git a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml index f83f0f8135b9..5ba55f9f20cc 100644 --- a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos SoC USB 3.0 DRD PHY USB 2.0 PHY maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Marek Szyprowski <m.szyprowski@samsung.com> - Sylwester Nawrocki <s.nawrocki@samsung.com> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 57b68d6c7c70..3666ac5b6518 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -33,7 +33,7 @@ patternProperties: $ref: "/schemas/types.yaml#/definitions/string" enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, - FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, @@ -58,7 +58,7 @@ patternProperties: $ref: "/schemas/types.yaml#/definitions/string" enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, - EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml index 8a90d8273767..6bd42e43cdab 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml @@ -48,13 +48,12 @@ properties: Name of one pin group to configure. enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2, dmic4, dmic5, dmic6, gpio1, gpio2, gpio3, - gpio4, gpio5, gpio6, gpio7, gpio7, gpio8, gpio9, + gpio4, gpio5, gpio6, gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, - gpio16, gpio17, gpio17, gpio18, gpio19, gpio20, - gpio21, gpio22, gpio23, gpio24, gpio25, gpio26, - gpio27, gpio27, gpio28, gpio29, gpio30, gpio31, - gpio32, gpio33, gpio34, gpio35, gpio36, gpio37, - gpio37, gpio38, gpio39 ] + gpio16, gpio17, gpio18, gpio19, gpio20, gpio21, + gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, + gpio28, gpio29, gpio30, gpio31, gpio32, gpio33, + gpio34, gpio35, gpio36, gpio37, gpio38, gpio39 ] function: description: diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml index 4b22a9e3a447..f5a121311f61 100644 --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml @@ -52,11 +52,19 @@ properties: hardware supporting it the pull strength in Ohm. drive-push-pull: - type: boolean + oneOf: + - type: boolean + - $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + deprecated: true description: drive actively high and low drive-open-drain: - type: boolean + oneOf: + - type: boolean + - $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 # No known cases of 0 + deprecated: true description: drive with open drain drive-open-source: diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml index f73348c54748..8cf3c47ab86b 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S3C/S5P/Exynos SoC pin controller - gpio bank maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml index c71939ac8b63..9869d4dceddb 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S3C/S5P/Exynos SoC pin controller - pins configuration maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml index a822f70f5702..1de91a51234d 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S3C/S5P/Exynos SoC pin controller - wake-up interrupt controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml index 989e48c051cf..3a65c66ca71d 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S3C/S5P/Exynos SoC pin controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> - Tomasz Figa <tomasz.figa@gmail.com> diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml index 4d293b2b2f84..d77fc88050c8 100644 --- a/Documentation/devicetree/bindings/power/renesas,apmu.yaml +++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml @@ -36,7 +36,8 @@ properties: cpus: $ref: /schemas/types.yaml#/definitions/phandle-array items: - maxItems: 1 + minItems: 1 + maxItems: 4 description: | Array of phandles pointing to CPU cores, which should match the order of CPU cores used by the WUPCR and PSTR registers in the Advanced Power diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml index f8461f06e6f4..118cf484cc69 100644 --- a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml @@ -17,7 +17,6 @@ properties: compatible: enum: - ti,bq24150 - - ti,bq24150 - ti,bq24150a - ti,bq24151 - ti,bq24151a diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml index 3978b48299de..4d3a1d09036f 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC Charger maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml index a21dc1a8890f..f5fd53debbc8 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml index 9b131c6facbc..84eeaef179a5 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -18,23 +18,23 @@ description: allOf: - $ref: "regulator.yaml#" - -if: - properties: - compatible: - contains: - const: regulator-fixed-clock - required: - - clocks -else: - if: - properties: - compatible: - contains: - const: regulator-fixed-domain - required: - - power-domains - - required-opps + - if: + properties: + compatible: + contains: + const: regulator-fixed-clock + then: + required: + - clocks + - if: + properties: + compatible: + contains: + const: regulator-fixed-domain + then: + required: + - power-domains + - required-opps properties: compatible: diff --git a/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml index 16f01886a601..285dc7122977 100644 --- a/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml +++ b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC regulators maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml index bb64b679f765..0e7cd4b3ace0 100644 --- a/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml +++ b/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml @@ -8,7 +8,7 @@ title: Maxim MAX77686 Power Management IC regulators maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX77686 Power Management diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml index 20d8559bdc2b..945a539749e8 100644 --- a/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml +++ b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml @@ -8,7 +8,7 @@ title: Maxim MAX77693 MicroUSB and Companion Power Management IC regulators maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml index f2b4dd15a0f3..236348c4710c 100644 --- a/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml +++ b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml @@ -8,7 +8,7 @@ title: Maxim MAX77802 Power Management IC regulators maintainers: - Javier Martinez Canillas <javier@dowhile0.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX77802 Power Management diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml index a963025e96c1..9695e7242882 100644 --- a/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml +++ b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim MAX77843 MicroUSB and Companion Power Management IC regulators maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX77843 MicroUSB Integrated diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml index e4e8c58f6046..3ff0d7d980e9 100644 --- a/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml +++ b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim MAX8952 voltage regulator maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> allOf: - $ref: regulator.yaml# diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml index 5898dcf10f06..b92eef68c19f 100644 --- a/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml +++ b/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim MAX8973/MAX77621 voltage regulator maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> allOf: - $ref: regulator.yaml# diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml index d5a44ca3df04..4321f061a7f6 100644 --- a/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml +++ b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim MAX8997 Power Management IC maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | The Maxim MAX8997 is a Power Management IC which includes voltage and current diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml index 28725c5467fc..edb411be0390 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml @@ -58,7 +58,7 @@ properties: type: object $ref: regulator.yaml# description: | - regulator description for buck1 and buck4. + regulator description for buck1 to buck4, and ldo. properties: regulator-allowed-modes: diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml index 0627dec513da..0f9eb317ba9a 100644 --- a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S2MPA01 Power Management IC regulators maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml index e3b780715f44..f1c50dcd0b04 100644 --- a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S2MPS11 Power Management IC regulators maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml index 579d77aefc3f..53b105a4ead1 100644 --- a/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S2MPS13 Power Management IC regulators maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml index fdea290b3e94..01f9d4e236e9 100644 --- a/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S2MPS14 Power Management IC regulators maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml index b3a883c94628..9576c2df45a6 100644 --- a/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S2MPS15 Power Management IC regulators maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml index 0ded6953e3b6..39b652c3c3c4 100644 --- a/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S2MPU02 Power Management IC regulators maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml index 3c1617b66861..172631ca3c25 100644 --- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml +++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5M8767 Power Management IC regulators maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml index 2424de733ee4..d99a729d2710 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml @@ -104,8 +104,7 @@ properties: qcom,smem-state-names: $ref: /schemas/types.yaml#/definitions/string description: The names of the state bits used for SMP2P output - items: - - const: stop + const: stop glink-edge: type: object @@ -130,7 +129,6 @@ properties: qcom,remote-pid: $ref: /schemas/types.yaml#/definitions/uint32 description: ID of the shared memory used by GLINK for communication with WPSS - maxItems: 1 required: - interrupts diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml index b0c41ab1a746..cdfcf32c53fa 100644 --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml @@ -24,6 +24,11 @@ properties: - const: hisilicon,hi3670-reset - const: hisilicon,hi3660-reset + hisi,rst-syscon: + deprecated: true + description: phandle of the reset's syscon, use hisilicon,rst-syscon instead + $ref: /schemas/types.yaml#/definitions/phandle + hisilicon,rst-syscon: description: phandle of the reset's syscon. $ref: /schemas/types.yaml#/definitions/phandle diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml index 377a7d242323..6566804ec567 100644 --- a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml +++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml @@ -55,6 +55,9 @@ properties: "#reset-cells": const: 1 + resets: + maxItems: 1 + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml b/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml index a50c34d5d199..765d9f9edd6e 100644 --- a/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml +++ b/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos SoC True Random Number Generator maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Łukasz Stelmach <l.stelmach@samsung.com> properties: diff --git a/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml b/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml index 84bf518a5549..4754174e9849 100644 --- a/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml +++ b/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TimerIO Random Number Generator maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml index 0b767fec39d8..6b38bd7eb3b4 100644 --- a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml @@ -71,7 +71,6 @@ allOf: then: properties: clock-output-names: - minItems: 1 maxItems: 1 - if: @@ -102,7 +101,6 @@ allOf: properties: clock-output-names: minItems: 3 - maxItems: 3 - if: properties: @@ -113,16 +111,12 @@ allOf: then: properties: clocks: - minItems: 3 - maxItems: 3 items: - description: Bus clock for register access - description: 24 MHz oscillator - description: 32 kHz clock from the CCU clock-names: - minItems: 3 - maxItems: 3 items: - const: bus - const: hosc @@ -142,7 +136,6 @@ allOf: properties: clocks: minItems: 3 - maxItems: 4 items: - description: Bus clock for register access - description: 24 MHz oscillator @@ -151,7 +144,6 @@ allOf: clock-names: minItems: 3 - maxItems: 4 items: - const: bus - const: hosc @@ -174,14 +166,12 @@ allOf: then: properties: interrupts: - minItems: 1 maxItems: 1 else: properties: interrupts: minItems: 2 - maxItems: 2 required: - "#clock-cells" diff --git a/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml index a2e984ea3553..500c62becd6b 100644 --- a/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml @@ -31,11 +31,19 @@ properties: to that of the RTC's count register. clocks: - maxItems: 1 + items: + - description: | + AHB clock + - description: | + Reference clock: divided by the prescaler to create a time-based + strobe (typically 1 Hz) for the calendar counter. By default, the rtc + on the PolarFire SoC shares it's reference with MTIMER so this will + be a 1 MHz clock. clock-names: items: - const: rtc + - const: rtcref required: - compatible @@ -48,11 +56,12 @@ additionalProperties: false examples: - | + #include "dt-bindings/clock/microchip,mpfs-clock.h" rtc@20124000 { compatible = "microchip,mpfs-rtc"; reg = <0x20124000 0x1000>; - clocks = <&clkcfg 21>; - clock-names = "rtc"; + clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>; + clock-names = "rtc", "rtcref"; interrupts = <80>, <81>; }; ... diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index d4688e317fc5..901c1e2cea28 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -100,7 +100,6 @@ allOf: maxItems: 3 clock-names: minItems: 2 - maxItems: 3 items: - const: uart - pattern: '^clk_uart_baud[0-1]$' @@ -118,11 +117,8 @@ allOf: then: properties: clocks: - minItems: 2 maxItems: 2 clock-names: - minItems: 2 - maxItems: 2 items: - const: uart - const: clk_uart_baud0 diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml index a98ed66d092e..0cabb773c397 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -8,7 +8,7 @@ title: Samsung's Exynos USI (Universal Serial Interface) binding maintainers: - Sam Protsenko <semen.protsenko@linaro.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C). diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml index c21c807b667c..34f6ee9de392 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -89,7 +89,6 @@ allOf: properties: dmas: minItems: 1 - maxItems: 2 items: - description: RX DMA Channel - description: TX DMA Channel diff --git a/Documentation/devicetree/bindings/sound/samsung,arndale.yaml b/Documentation/devicetree/bindings/sound/samsung,arndale.yaml index cea2bf3544f0..9bc4585bb6e5 100644 --- a/Documentation/devicetree/bindings/sound/samsung,arndale.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,arndale.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Insignal Arndale boards audio complex maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> properties: diff --git a/Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml b/Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml index cb51af90435e..ac151d3c1d77 100644 --- a/Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung SMDK5250 audio complex with WM8994 codec maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> properties: diff --git a/Documentation/devicetree/bindings/sound/samsung,snow.yaml b/Documentation/devicetree/bindings/sound/samsung,snow.yaml index 0c3b3302b842..51a83d3c7274 100644 --- a/Documentation/devicetree/bindings/sound/samsung,snow.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,snow.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Google Snow audio complex with MAX9809x codec maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> properties: diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml index 74712d6f3ef4..491e08019c04 100644 --- a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos5433 TM2(E) audio complex with WM5110 codec maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> properties: diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index b3dbcba33e41..fe2e15504ebc 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -136,8 +136,7 @@ allOf: compatible: contains: const: st,stm32f4-sai - - - then: + then: properties: clocks: items: @@ -148,8 +147,7 @@ allOf: items: - const: x8k - const: x11k - - - else: + else: properties: clocks: items: diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml index 6806f53a4aed..20ea5883b7ff 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml @@ -80,7 +80,6 @@ allOf: then: properties: clocks: - minItems: 6 items: - description: AUXCLK clock for McASP used by CPB audio - description: Parent for CPB_McASP auxclk (for 48KHz) @@ -107,7 +106,6 @@ allOf: then: properties: clocks: - maxItems: 4 items: - description: AUXCLK clock for McASP used by CPB audio - description: Parent for CPB_McASP auxclk (for 48KHz) diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml index b104899205f6..5de710adfa63 100644 --- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml @@ -124,7 +124,6 @@ properties: description: | Override the default TX fifo size. Unit is words. Ignored if 0. $ref: /schemas/types.yaml#/definitions/uint32 - maxItems: 1 default: 64 renesas,rx-fifo-size: @@ -132,7 +131,6 @@ properties: description: | Override the default RX fifo size. Unit is words. Ignored if 0. $ref: /schemas/types.yaml#/definitions/uint32 - maxItems: 1 default: 64 required: diff --git a/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml index f0db3fb3d688..25b1b6c12d4d 100644 --- a/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Peripheral-specific properties for Samsung S3C/S5P/Exynos SoC SPI controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: See spi-peripheral-props.yaml for more info. diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml index bf9a76d931d2..a50f24f9359d 100644 --- a/Documentation/devicetree/bindings/spi/samsung,spi.yaml +++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S3C/S5P/Exynos SoC SPI controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: All the SPI controller nodes should be represented in the aliases node using diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml index 668a9a41a775..993430be355b 100644 --- a/Documentation/devicetree/bindings/sram/sram.yaml +++ b/Documentation/devicetree/bindings/sram/sram.yaml @@ -136,14 +136,14 @@ required: - reg if: - properties: - compatible: - contains: - enum: - - qcom,rpm-msg-ram - - rockchip,rk3288-pmu-sram - -else: + not: + properties: + compatible: + contains: + enum: + - qcom,rpm-msg-ram + - rockchip,rk3288-pmu-sram +then: required: - "#address-cells" - "#size-cells" diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml index f963204e0b16..1368d90da0e8 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -67,7 +67,6 @@ then: properties: reg: minItems: 2 - maxItems: 3 items: - description: TSC1 registers - description: TSC2 registers diff --git a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml index 17129f75d962..1344df708e2d 100644 --- a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos SoC Thermal Management Unit (TMU) maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | For multi-instance tmu each instance should have an alias correctly numbered diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml index d227dea368be..fb45f66d6454 100644 --- a/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml +++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml @@ -43,6 +43,9 @@ properties: - const: phy_clk - const: ref_clk + power-domains: + maxItems: 1 + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml index 22b91a27d776..6b9a3bcb3926 100644 --- a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos SoC USB 3.0 DWC3 Controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml index fbf07d6e707a..9c92defbba01 100644 --- a/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos SoC USB 2.0 EHCI/OHCI Controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: @@ -62,6 +62,7 @@ required: - interrupts - phys - phy-names + - reg allOf: - if: diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst index 55006678394a..36a76cbe9095 100644 --- a/Documentation/driver-api/dma-buf.rst +++ b/Documentation/driver-api/dma-buf.rst @@ -185,6 +185,12 @@ DMA Fence Chain .. kernel-doc:: include/linux/dma-fence-chain.h :internal: +DMA Fence unwrap +~~~~~~~~~~~~~~~~ + +.. kernel-doc:: include/linux/dma-fence-unwrap.h + :internal: + DMA Fence uABI/Sync File ~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/filesystems/caching/backend-api.rst b/Documentation/filesystems/caching/backend-api.rst index be793c49a772..d7507becf674 100644 --- a/Documentation/filesystems/caching/backend-api.rst +++ b/Documentation/filesystems/caching/backend-api.rst @@ -73,7 +73,7 @@ busy. If successful, the cache backend can then start setting up the cache. In the event that the initialisation fails, the cache backend should call:: - void fscache_relinquish_cookie(struct fscache_cache *cache); + void fscache_relinquish_cache(struct fscache_cache *cache); to reset and discard the cookie. @@ -110,9 +110,9 @@ to withdraw them, calling:: on the cookie that each object belongs to. This schedules the specified cookie for withdrawal. This gets offloaded to a workqueue. The cache backend can -test for completion by calling:: +wait for completion by calling:: - bool fscache_are_objects_withdrawn(struct fscache_cookie *cache); + void fscache_wait_for_objects(struct fscache_cache *cache); Once all the cookies are withdrawn, a cache backend can withdraw all the volumes, calling:: @@ -125,7 +125,7 @@ outstanding accesses on the volume to complete before returning. When the the cache is completely withdrawn, fscache should be notified by calling:: - void fscache_cache_relinquish(struct fscache_cache *cache); + void fscache_relinquish_cache(struct fscache_cache *cache); to clear fields in the cookie and discard the caller's ref on it. diff --git a/Documentation/filesystems/caching/netfs-api.rst b/Documentation/filesystems/caching/netfs-api.rst index 5066113acad5..7308d76a29dc 100644 --- a/Documentation/filesystems/caching/netfs-api.rst +++ b/Documentation/filesystems/caching/netfs-api.rst @@ -404,22 +404,21 @@ schedule a write of that region:: And if an error occurs before that point is reached, the marks can be removed by calling:: - void fscache_clear_page_bits(struct fscache_cookie *cookie, - struct address_space *mapping, + void fscache_clear_page_bits(struct address_space *mapping, loff_t start, size_t len, bool caching) -In both of these functions, the cookie representing the cache object to be -written to and a pointer to the mapping to which the source pages are attached -are passed in; start and len indicate the size of the region that's going to be -written (it doesn't have to align to page boundaries necessarily, but it does -have to align to DIO boundaries on the backing filesystem). The caching -parameter indicates if caching should be skipped, and if false, the functions -do nothing. - -The write function takes some additional parameters: i_size indicates the size -of the netfs file and term_func indicates an optional completion function, to -which term_func_priv will be passed, along with the error or amount written. +In these functions, a pointer to the mapping to which the source pages are +attached is passed in and start and len indicate the size of the region that's +going to be written (it doesn't have to align to page boundaries necessarily, +but it does have to align to DIO boundaries on the backing filesystem). The +caching parameter indicates if caching should be skipped, and if false, the +functions do nothing. + +The write function takes some additional parameters: the cookie representing +the cache object to be written to, i_size indicates the size of the netfs file +and term_func indicates an optional completion function, to which +term_func_priv will be passed, along with the error or amount written. Note that the write function will always run asynchronously and will unmark all the pages upon completion before calling term_func. diff --git a/Documentation/filesystems/ext4/attributes.rst b/Documentation/filesystems/ext4/attributes.rst index 54386a010a8d..871d2da7a0a9 100644 --- a/Documentation/filesystems/ext4/attributes.rst +++ b/Documentation/filesystems/ext4/attributes.rst @@ -76,7 +76,7 @@ The beginning of an extended attribute block is in - Checksum of the extended attribute block. * - 0x14 - \_\_u32 - - h\_reserved[2] + - h\_reserved[3] - Zero. The checksum is calculated against the FS UUID, the 64-bit block number diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst index 4a2426f0485a..ad8dc8c040a2 100644 --- a/Documentation/filesystems/f2fs.rst +++ b/Documentation/filesystems/f2fs.rst @@ -235,12 +235,6 @@ offgrpjquota Turn off group journalled quota. offprjjquota Turn off project journalled quota. quota Enable plain user disk quota accounting. noquota Disable all plain disk quota option. -whint_mode=%s Control which write hints are passed down to block - layer. This supports "off", "user-based", and - "fs-based". In "off" mode (default), f2fs does not pass - down hints. In "user-based" mode, f2fs tries to pass - down hints given by users. And in "fs-based" mode, f2fs - passes down hints with its policy. alloc_mode=%s Adjust block allocation policy, which supports "reuse" and "default". fsync_mode=%s Control the policy of fsync. Currently supports "posix", @@ -751,70 +745,6 @@ In order to identify whether the data in the victim segment are valid or not, F2FS manages a bitmap. Each bit represents the validity of a block, and the bitmap is composed of a bit stream covering whole blocks in main area. -Write-hint Policy ------------------ - -1) whint_mode=off. F2FS only passes down WRITE_LIFE_NOT_SET. - -2) whint_mode=user-based. F2FS tries to pass down hints given by -users. - -===================== ======================== =================== -User F2FS Block -===================== ======================== =================== -N/A META WRITE_LIFE_NOT_SET -N/A HOT_NODE " -N/A WARM_NODE " -N/A COLD_NODE " -ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME -extension list " " - --- buffered io -WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME -WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT -WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET -WRITE_LIFE_NONE " " -WRITE_LIFE_MEDIUM " " -WRITE_LIFE_LONG " " - --- direct io -WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME -WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT -WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET -WRITE_LIFE_NONE " WRITE_LIFE_NONE -WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM -WRITE_LIFE_LONG " WRITE_LIFE_LONG -===================== ======================== =================== - -3) whint_mode=fs-based. F2FS passes down hints with its policy. - -===================== ======================== =================== -User F2FS Block -===================== ======================== =================== -N/A META WRITE_LIFE_MEDIUM; -N/A HOT_NODE WRITE_LIFE_NOT_SET -N/A WARM_NODE " -N/A COLD_NODE WRITE_LIFE_NONE -ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME -extension list " " - --- buffered io -WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME -WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT -WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_LONG -WRITE_LIFE_NONE " " -WRITE_LIFE_MEDIUM " " -WRITE_LIFE_LONG " " - --- direct io -WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME -WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT -WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET -WRITE_LIFE_NONE " WRITE_LIFE_NONE -WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM -WRITE_LIFE_LONG " WRITE_LIFE_LONG -===================== ======================== =================== - Fallocate(2) Policy ------------------- diff --git a/Documentation/networking/bonding.rst b/Documentation/networking/bonding.rst index 525e6842dd33..43be3782e5df 100644 --- a/Documentation/networking/bonding.rst +++ b/Documentation/networking/bonding.rst @@ -894,7 +894,7 @@ xmit_hash_policy Uses XOR of hardware MAC addresses and packet type ID field to generate the hash. The formula is - hash = source MAC XOR destination MAC XOR packet type ID + hash = source MAC[5] XOR destination MAC[5] XOR packet type ID slave number = hash modulo slave count This algorithm will place all traffic to a particular @@ -910,7 +910,7 @@ xmit_hash_policy Uses XOR of hardware MAC addresses and IP addresses to generate the hash. The formula is - hash = source MAC XOR destination MAC XOR packet type ID + hash = source MAC[5] XOR destination MAC[5] XOR packet type ID hash = hash XOR source IP XOR destination IP hash = hash XOR (hash RSHIFT 16) hash = hash XOR (hash RSHIFT 8) diff --git a/Documentation/networking/dsa/dsa.rst b/Documentation/networking/dsa/dsa.rst index 89bb4fa4c362..ddc1dd039337 100644 --- a/Documentation/networking/dsa/dsa.rst +++ b/Documentation/networking/dsa/dsa.rst @@ -10,21 +10,21 @@ in joining the effort. Design principles ================= -The Distributed Switch Architecture is a subsystem which was primarily designed -to support Marvell Ethernet switches (MV88E6xxx, a.k.a Linkstreet product line) -using Linux, but has since evolved to support other vendors as well. +The Distributed Switch Architecture subsystem was primarily designed to +support Marvell Ethernet switches (MV88E6xxx, a.k.a. Link Street product +line) using Linux, but has since evolved to support other vendors as well. The original philosophy behind this design was to be able to use unmodified Linux tools such as bridge, iproute2, ifconfig to work transparently whether they configured/queried a switch port network device or a regular network device. -An Ethernet switch is typically comprised of multiple front-panel ports, and one -or more CPU or management port. The DSA subsystem currently relies on the +An Ethernet switch typically comprises multiple front-panel ports and one +or more CPU or management ports. The DSA subsystem currently relies on the presence of a management port connected to an Ethernet controller capable of receiving Ethernet frames from the switch. This is a very common setup for all kinds of Ethernet switches found in Small Home and Office products: routers, -gateways, or even top-of-the rack switches. This host Ethernet controller will +gateways, or even top-of-rack switches. This host Ethernet controller will be later referred to as "master" and "cpu" in DSA terminology and code. The D in DSA stands for Distributed, because the subsystem has been designed @@ -33,14 +33,14 @@ using upstream and downstream Ethernet links between switches. These specific ports are referred to as "dsa" ports in DSA terminology and code. A collection of multiple switches connected to each other is called a "switch tree". -For each front-panel port, DSA will create specialized network devices which are +For each front-panel port, DSA creates specialized network devices which are used as controlling and data-flowing endpoints for use by the Linux networking stack. These specialized network interfaces are referred to as "slave" network interfaces in DSA terminology and code. The ideal case for using DSA is when an Ethernet switch supports a "switch tag" which is a hardware feature making the switch insert a specific tag for each -Ethernet frames it received to/from specific ports to help the management +Ethernet frame it receives to/from specific ports to help the management interface figure out: - what port is this frame coming from @@ -125,7 +125,7 @@ other switches from the same fabric, and in this case, the outermost switch ports must decapsulate the packet. Note that in certain cases, it might be the case that the tagging format used -by a leaf switch (not connected directly to the CPU) to not be the same as what +by a leaf switch (not connected directly to the CPU) is not the same as what the network stack sees. This can be seen with Marvell switch trees, where the CPU port can be configured to use either the DSA or the Ethertype DSA (EDSA) format, but the DSA links are configured to use the shorter (without Ethertype) @@ -270,21 +270,21 @@ These interfaces are specialized in order to: to/from specific switch ports - query the switch for ethtool operations: statistics, link state, Wake-on-LAN, register dumps... -- external/internal PHY management: link, auto-negotiation etc. +- manage external/internal PHY: link, auto-negotiation, etc. These slave network devices have custom net_device_ops and ethtool_ops function pointers which allow DSA to introduce a level of layering between the networking -stack/ethtool, and the switch driver implementation. +stack/ethtool and the switch driver implementation. Upon frame transmission from these slave network devices, DSA will look up which -switch tagging protocol is currently registered with these network devices, and +switch tagging protocol is currently registered with these network devices and invoke a specific transmit routine which takes care of adding the relevant switch tag in the Ethernet frames. These frames are then queued for transmission using the master network device -``ndo_start_xmit()`` function, since they contain the appropriate switch tag, the +``ndo_start_xmit()`` function. Since they contain the appropriate switch tag, the Ethernet switch will be able to process these incoming frames from the -management interface and delivers these frames to the physical switch port. +management interface and deliver them to the physical switch port. Graphical representation ------------------------ @@ -330,9 +330,9 @@ MDIO reads/writes towards specific PHY addresses. In most MDIO-connected switches, these functions would utilize direct or indirect PHY addressing mode to return standard MII registers from the switch builtin PHYs, allowing the PHY library and/or to return link status, link partner pages, auto-negotiation -results etc.. +results, etc. -For Ethernet switches which have both external and internal MDIO busses, the +For Ethernet switches which have both external and internal MDIO buses, the slave MII bus can be utilized to mux/demux MDIO reads and writes towards either internal or external MDIO devices this switch might be connected to: internal PHYs, external PHYs, or even external switches. @@ -349,7 +349,7 @@ DSA data structures are defined in ``include/net/dsa.h`` as well as table indication (when cascading switches) - ``dsa_platform_data``: platform device configuration data which can reference - a collection of dsa_chip_data structure if multiples switches are cascaded, + a collection of dsa_chip_data structures if multiple switches are cascaded, the master network device this switch tree is attached to needs to be referenced @@ -426,7 +426,7 @@ logic basically looks like this: "phy-handle" property, if found, this PHY device is created and registered using ``of_phy_connect()`` -- if Device Tree is used, and the PHY device is "fixed", that is, conforms to +- if Device Tree is used and the PHY device is "fixed", that is, conforms to the definition of a non-MDIO managed PHY as defined in ``Documentation/devicetree/bindings/net/fixed-link.txt``, the PHY is registered and connected transparently using the special fixed MDIO bus driver @@ -481,7 +481,7 @@ Device Tree DSA features a standardized binding which is documented in ``Documentation/devicetree/bindings/net/dsa/dsa.txt``. PHY/MDIO library helper functions such as ``of_get_phy_mode()``, ``of_phy_connect()`` are also used to query -per-port PHY specific details: interface connection, MDIO bus location etc.. +per-port PHY specific details: interface connection, MDIO bus location, etc. Driver development ================== @@ -509,7 +509,7 @@ Switch configuration - ``setup``: setup function for the switch, this function is responsible for setting up the ``dsa_switch_ops`` private structure with all it needs: register maps, - interrupts, mutexes, locks etc.. This function is also expected to properly + interrupts, mutexes, locks, etc. This function is also expected to properly configure the switch to separate all network interfaces from each other, that is, they should be isolated by the switch hardware itself, typically by creating a Port-based VLAN ID for each port and allowing only the CPU port and the @@ -526,13 +526,13 @@ PHY devices and link management - ``get_phy_flags``: Some switches are interfaced to various kinds of Ethernet PHYs, if the PHY library PHY driver needs to know about information it cannot obtain on its own (e.g.: coming from switch memory mapped registers), this function - should return a 32-bits bitmask of "flags", that is private between the switch + should return a 32-bit bitmask of "flags" that is private between the switch driver and the Ethernet PHY driver in ``drivers/net/phy/\*``. - ``phy_read``: Function invoked by the DSA slave MDIO bus when attempting to read the switch port MDIO registers. If unavailable, return 0xffff for each read. For builtin switch Ethernet PHYs, this function should allow reading the link - status, auto-negotiation results, link partner pages etc.. + status, auto-negotiation results, link partner pages, etc. - ``phy_write``: Function invoked by the DSA slave MDIO bus when attempting to write to the switch port MDIO registers. If unavailable return a negative error @@ -554,7 +554,7 @@ Ethtool operations ------------------ - ``get_strings``: ethtool function used to query the driver's strings, will - typically return statistics strings, private flags strings etc. + typically return statistics strings, private flags strings, etc. - ``get_ethtool_stats``: ethtool function used to query per-port statistics and return their values. DSA overlays slave network devices general statistics: @@ -564,7 +564,7 @@ Ethtool operations - ``get_sset_count``: ethtool function used to query the number of statistics items - ``get_wol``: ethtool function used to obtain Wake-on-LAN settings per-port, this - function may, for certain implementations also query the master network device + function may for certain implementations also query the master network device Wake-on-LAN settings if this interface needs to participate in Wake-on-LAN - ``set_wol``: ethtool function used to configure Wake-on-LAN settings per-port, @@ -607,14 +607,14 @@ Power management in a fully active state - ``port_enable``: function invoked by the DSA slave network device ndo_open - function when a port is administratively brought up, this function should be - fully enabling a given switch port. DSA takes care of marking the port with + function when a port is administratively brought up, this function should + fully enable a given switch port. DSA takes care of marking the port with ``BR_STATE_BLOCKING`` if the port is a bridge member, or ``BR_STATE_FORWARDING`` if it was not, and propagating these changes down to the hardware - ``port_disable``: function invoked by the DSA slave network device ndo_close - function when a port is administratively brought down, this function should be - fully disabling a given switch port. DSA takes care of marking the port with + function when a port is administratively brought down, this function should + fully disable a given switch port. DSA takes care of marking the port with ``BR_STATE_DISABLED`` and propagating changes to the hardware if this port is disabled while being a bridge member @@ -622,12 +622,12 @@ Bridge layer ------------ - ``port_bridge_join``: bridge layer function invoked when a given switch port is - added to a bridge, this function should be doing the necessary at the switch - level to permit the joining port from being added to the relevant logical + added to a bridge, this function should do what's necessary at the switch + level to permit the joining port to be added to the relevant logical domain for it to ingress/egress traffic with other members of the bridge. - ``port_bridge_leave``: bridge layer function invoked when a given switch port is - removed from a bridge, this function should be doing the necessary at the + removed from a bridge, this function should do what's necessary at the switch level to deny the leaving port from ingress/egress traffic from the remaining bridge members. When the port leaves the bridge, it should be aged out at the switch hardware for the switch to (re) learn MAC addresses behind @@ -663,7 +663,7 @@ Bridge layer point for drivers that need to configure the hardware for enabling this feature. -- ``port_bridge_tx_fwd_unoffload``: bridge layer function invoken when a driver +- ``port_bridge_tx_fwd_unoffload``: bridge layer function invoked when a driver leaves a bridge port which had the TX forwarding offload feature enabled. Bridge VLAN filtering diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index b0024aa7b051..66828293d9cb 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -267,6 +267,13 @@ ipfrag_max_dist - INTEGER from different IP datagrams, which could result in data corruption. Default: 64 +bc_forwarding - INTEGER + bc_forwarding enables the feature described in rfc1812#section-5.3.5.2 + and rfc2644. It allows the router to forward directed broadcast. + To enable this feature, the 'all' entry and the input interface entry + should be set to 1. + Default: 0 + INET peer storage ================= diff --git a/Documentation/process/embargoed-hardware-issues.rst b/Documentation/process/embargoed-hardware-issues.rst index 6f8f36e10e8b..95999302d279 100644 --- a/Documentation/process/embargoed-hardware-issues.rst +++ b/Documentation/process/embargoed-hardware-issues.rst @@ -244,10 +244,11 @@ disclosure of a particular issue, unless requested by a response team or by an involved disclosed party. The current ambassadors list: ============= ======================================================== - ARM Grant Likely <grant.likely@arm.com> AMD Tom Lendacky <tom.lendacky@amd.com> - IBM Z Christian Borntraeger <borntraeger@de.ibm.com> - IBM Power Anton Blanchard <anton@linux.ibm.com> + Ampere Darren Hart <darren@os.amperecomputing.com> + ARM Catalin Marinas <catalin.marinas@arm.com> + IBM Power Anton Blanchard <anton@linux.ibm.com> + IBM Z Christian Borntraeger <borntraeger@de.ibm.com> Intel Tony Luck <tony.luck@intel.com> Qualcomm Trilok Soni <tsoni@codeaurora.org> diff --git a/Documentation/security/siphash.rst b/Documentation/security/siphash.rst index bd9363025fcb..a10380cb78e5 100644 --- a/Documentation/security/siphash.rst +++ b/Documentation/security/siphash.rst @@ -121,26 +121,36 @@ even scarier, uses an easily brute-forcable 64-bit key (with a 32-bit output) instead of SipHash's 128-bit key. However, this may appeal to some high-performance `jhash` users. -Danger! - -Do not ever use HalfSipHash except for as a hashtable key function, and only -then when you can be absolutely certain that the outputs will never be -transmitted out of the kernel. This is only remotely useful over `jhash` as a -means of mitigating hashtable flooding denial of service attacks. - -Generating a HalfSipHash key -============================ +HalfSipHash support is provided through the "hsiphash" family of functions. + +.. warning:: + Do not ever use the hsiphash functions except for as a hashtable key + function, and only then when you can be absolutely certain that the outputs + will never be transmitted out of the kernel. This is only remotely useful + over `jhash` as a means of mitigating hashtable flooding denial of service + attacks. + +On 64-bit kernels, the hsiphash functions actually implement SipHash-1-3, a +reduced-round variant of SipHash, instead of HalfSipHash-1-3. This is because in +64-bit code, SipHash-1-3 is no slower than HalfSipHash-1-3, and can be faster. +Note, this does *not* mean that in 64-bit kernels the hsiphash functions are the +same as the siphash ones, or that they are secure; the hsiphash functions still +use a less secure reduced-round algorithm and truncate their outputs to 32 +bits. + +Generating a hsiphash key +========================= Keys should always be generated from a cryptographically secure source of -random numbers, either using get_random_bytes or get_random_once: +random numbers, either using get_random_bytes or get_random_once:: -hsiphash_key_t key; -get_random_bytes(&key, sizeof(key)); + hsiphash_key_t key; + get_random_bytes(&key, sizeof(key)); If you're not deriving your key from here, you're doing it wrong. -Using the HalfSipHash functions -=============================== +Using the hsiphash functions +============================ There are two variants of the function, one that takes a list of integers, and one that takes a buffer:: @@ -183,7 +193,7 @@ You may then iterate like usual over the returned hash bucket. Performance =========== -HalfSipHash is roughly 3 times slower than JenkinsHash. For many replacements, -this will not be a problem, as the hashtable lookup isn't the bottleneck. And -in general, this is probably a good sacrifice to make for the security and DoS -resistance of HalfSipHash. +hsiphash() is roughly 3 times slower than jhash(). For many replacements, this +will not be a problem, as the hashtable lookup isn't the bottleneck. And in +general, this is probably a good sacrifice to make for the security and DoS +resistance of hsiphash(). diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index d13fa6600467..4a900cdbc62e 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -5986,16 +5986,16 @@ should put the acknowledged interrupt vector into the 'epr' field. #define KVM_SYSTEM_EVENT_RESET 2 #define KVM_SYSTEM_EVENT_CRASH 3 __u32 type; - __u64 flags; + __u32 ndata; + __u64 data[16]; } system_event; If exit_reason is KVM_EXIT_SYSTEM_EVENT then the vcpu has triggered a system-level event using some architecture specific mechanism (hypercall or some special instruction). In case of ARM64, this is triggered using -HVC instruction based PSCI call from the vcpu. The 'type' field describes -the system-level event type. The 'flags' field describes architecture -specific flags for the system-level event. +HVC instruction based PSCI call from the vcpu. +The 'type' field describes the system-level event type. Valid values for 'type' are: - KVM_SYSTEM_EVENT_SHUTDOWN -- the guest has requested a shutdown of the @@ -6010,10 +6010,20 @@ Valid values for 'type' are: to ignore the request, or to gather VM memory core dump and/or reset/shutdown of the VM. -Valid flags are: +If KVM_CAP_SYSTEM_EVENT_DATA is present, the 'data' field can contain +architecture specific information for the system-level event. Only +the first `ndata` items (possibly zero) of the data array are valid. - - KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2 (arm64 only) -- the guest issued - a SYSTEM_RESET2 call according to v1.1 of the PSCI specification. + - for arm64, data[0] is set to KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2 if + the guest issued a SYSTEM_RESET2 call according to v1.1 of the PSCI + specification. + + - for RISC-V, data[0] is set to the value of the second argument of the + ``sbi_system_reset`` call. + +Previous versions of Linux defined a `flags` member in this struct. The +field is now aliased to `data[0]`. Userspace can assume that it is only +written if ndata is greater than 0. :: @@ -6190,6 +6200,7 @@ Valid values for 'type' are: unsigned long args[6]; unsigned long ret[2]; } riscv_sbi; + If exit reason is KVM_EXIT_RISCV_SBI then it indicates that the VCPU has done a SBI call which is not handled by KVM RISC-V kernel module. The details of the SBI call are available in 'riscv_sbi' member of kvm_run structure. The diff --git a/Documentation/virt/kvm/vcpu-requests.rst b/Documentation/virt/kvm/vcpu-requests.rst index db43ee571f5a..31f62b64e07b 100644 --- a/Documentation/virt/kvm/vcpu-requests.rst +++ b/Documentation/virt/kvm/vcpu-requests.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + ================= KVM VCPU Requests ================= diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst index 1c6847fff304..2d307811978c 100644 --- a/Documentation/virt/kvm/x86/amd-memory-encryption.rst +++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + ====================================== Secure Encrypted Virtualization (SEV) ====================================== diff --git a/Documentation/virt/kvm/x86/errata.rst b/Documentation/virt/kvm/x86/errata.rst index 806f049b6975..410e0aa63493 100644 --- a/Documentation/virt/kvm/x86/errata.rst +++ b/Documentation/virt/kvm/x86/errata.rst @@ -1,3 +1,4 @@ +.. SPDX-License-Identifier: GPL-2.0 ======================================= Known limitations of CPU virtualization @@ -36,4 +37,3 @@ Nested virtualization features ------------------------------ TBD - diff --git a/Documentation/virt/kvm/x86/running-nested-guests.rst b/Documentation/virt/kvm/x86/running-nested-guests.rst index bd70c69468ae..a27e6768d900 100644 --- a/Documentation/virt/kvm/x86/running-nested-guests.rst +++ b/Documentation/virt/kvm/x86/running-nested-guests.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + ============================== Running nested guests with KVM ============================== diff --git a/Documentation/vm/page_owner.rst b/Documentation/vm/page_owner.rst index 65204d7f004f..7e0c3f574e78 100644 --- a/Documentation/vm/page_owner.rst +++ b/Documentation/vm/page_owner.rst @@ -110,7 +110,7 @@ Usage If you want to sort by the page nums of buf, use the ``-m`` parameter. The detailed parameters are: - fundamental function: + fundamental function:: Sort: -a Sort by memory allocation time. @@ -122,7 +122,7 @@ Usage -s Sort by stack trace. -t Sort by times (default). - additional function: + additional function:: Cull: --cull <rules> @@ -153,6 +153,7 @@ Usage STANDARD FORMAT SPECIFIERS ========================== +:: KEY LONG DESCRIPTION p pid process ID |