diff options
Diffstat (limited to 'Documentation')
127 files changed, 7842 insertions, 2173 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 2214f123a976..49c051380daf 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -218,8 +218,6 @@ m68k/ - directory with info about Linux on Motorola 68k architecture. magic-number.txt - list of magic numbers used to mark/protect kernel data structures. -mca.txt - - info on supporting Micro Channel Architecture (e.g. PS/2) systems. md.txt - info on boot arguments for the multiple devices driver. memory-barriers.txt diff --git a/Documentation/ABI/testing/debugfs-pfo-nx-crypto b/Documentation/ABI/testing/debugfs-pfo-nx-crypto new file mode 100644 index 000000000000..685d5a448423 --- /dev/null +++ b/Documentation/ABI/testing/debugfs-pfo-nx-crypto @@ -0,0 +1,45 @@ +What: /sys/kernel/debug/nx-crypto/* +Date: March 2012 +KernelVersion: 3.4 +Contact: Kent Yoder <key@linux.vnet.ibm.com> +Description: + + These debugfs interfaces are built by the nx-crypto driver, built in +arch/powerpc/crypto/nx. + +Error Detection +=============== + +errors: +- A u32 providing a total count of errors since the driver was loaded. The +only errors counted here are those returned from the hcall, H_COP_OP. + +last_error: +- The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not +recorded here (the hcall will retry until -EBUSY goes away). + +last_error_pid: +- The process ID of the process who received the most recent error from the +hcall. + +Device Use +========== + +aes_bytes: +- The total number of bytes encrypted using AES in any of the driver's +supported modes. + +aes_ops: +- The total number of AES operations submitted to the hardware. + +sha256_bytes: +- The total number of bytes hashed by the hardware using SHA-256. + +sha256_ops: +- The total number of SHA-256 operations submitted to the hardware. + +sha512_bytes: +- The total number of bytes hashed by the hardware using SHA-512. + +sha512_ops: +- The total number of SHA-512 operations submitted to the hardware. diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power index 840f7d64d483..45000f0db4d4 100644 --- a/Documentation/ABI/testing/sysfs-devices-power +++ b/Documentation/ABI/testing/sysfs-devices-power @@ -96,16 +96,26 @@ Description: is read-only. If the device is not enabled to wake up the system from sleep states, this attribute is not present. -What: /sys/devices/.../power/wakeup_hit_count -Date: September 2010 +What: /sys/devices/.../power/wakeup_abort_count +Date: February 2012 Contact: Rafael J. Wysocki <rjw@sisk.pl> Description: - The /sys/devices/.../wakeup_hit_count attribute contains the + The /sys/devices/.../wakeup_abort_count attribute contains the number of times the processing of a wakeup event associated with - the device might prevent the system from entering a sleep state. - This attribute is read-only. If the device is not enabled to - wake up the system from sleep states, this attribute is not - present. + the device might have aborted system transition into a sleep + state in progress. This attribute is read-only. If the device + is not enabled to wake up the system from sleep states, this + attribute is not present. + +What: /sys/devices/.../power/wakeup_expire_count +Date: February 2012 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/devices/.../wakeup_expire_count attribute contains the + number of times a wakeup event associated with the device has + been reported with a timeout that expired. This attribute is + read-only. If the device is not enabled to wake up the system + from sleep states, this attribute is not present. What: /sys/devices/.../power/wakeup_active Date: September 2010 @@ -148,6 +158,17 @@ Description: not enabled to wake up the system from sleep states, this attribute is not present. +What: /sys/devices/.../power/wakeup_prevent_sleep_time_ms +Date: February 2012 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute + contains the total time the device has been preventing + opportunistic transitions to sleep states from occuring. + This attribute is read-only. If the device is not enabled to + wake up the system from sleep states, this attribute is not + present. + What: /sys/devices/.../power/autosuspend_delay_ms Date: September 2010 Contact: Alan Stern <stern@rowland.harvard.edu> diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom index 56c54558c8a4..8d55a83d6921 100644 --- a/Documentation/ABI/testing/sysfs-driver-wacom +++ b/Documentation/ABI/testing/sysfs-driver-wacom @@ -23,9 +23,10 @@ Contact: linux-input@vger.kernel.org Description: Attribute group for control of the status LEDs and the OLEDs. This attribute group is only available for Intuos 4 M, L, - and XL (with LEDs and OLEDs) and Cintiq 21UX2 and Cintiq 24HD - (LEDs only). Therefore its presence implicitly signifies the - presence of said LEDs and OLEDs on the tablet device. + and XL (with LEDs and OLEDs), Intuos 5 (LEDs only), and Cintiq + 21UX2 and Cintiq 24HD (LEDs only). Therefore its presence + implicitly signifies the presence of said LEDs and OLEDs on the + tablet device. What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance Date: August 2011 @@ -48,10 +49,10 @@ What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led0 Date: August 2011 Contact: linux-input@vger.kernel.org Description: - Writing to this file sets which one of the four (for Intuos 4) - or of the right four (for Cintiq 21UX2 and Cintiq 24HD) status - LEDs is active (0..3). The other three LEDs on the same side are - always inactive. + Writing to this file sets which one of the four (for Intuos 4 + and Intuos 5) or of the right four (for Cintiq 21UX2 and Cintiq + 24HD) status LEDs is active (0..3). The other three LEDs on the + same side are always inactive. What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select Date: September 2011 diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index b464d12761ba..31725ffeeb3a 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -172,3 +172,62 @@ Description: Reading from this file will display the current value, which is set to 1 MB by default. + +What: /sys/power/autosleep +Date: April 2012 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/power/autosleep file can be written one of the strings + returned by reads from /sys/power/state. If that happens, a + work item attempting to trigger a transition of the system to + the sleep state represented by that string is queued up. This + attempt will only succeed if there are no active wakeup sources + in the system at that time. After every execution, regardless + of whether or not the attempt to put the system to sleep has + succeeded, the work item requeues itself until user space + writes "off" to /sys/power/autosleep. + + Reading from this file causes the last string successfully + written to it to be returned. + +What: /sys/power/wake_lock +Date: February 2012 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/power/wake_lock file allows user space to create + wakeup source objects and activate them on demand (if one of + those wakeup sources is active, reads from the + /sys/power/wakeup_count file block or return false). When a + string without white space is written to /sys/power/wake_lock, + it will be assumed to represent a wakeup source name. If there + is a wakeup source object with that name, it will be activated + (unless active already). Otherwise, a new wakeup source object + will be registered, assigned the given name and activated. + If a string written to /sys/power/wake_lock contains white + space, the part of the string preceding the white space will be + regarded as a wakeup source name and handled as descrived above. + The other part of the string will be regarded as a timeout (in + nanoseconds) such that the wakeup source will be automatically + deactivated after it has expired. The timeout, if present, is + set regardless of the current state of the wakeup source object + in question. + + Reads from this file return a string consisting of the names of + wakeup sources created with the help of it that are active at + the moment, separated with spaces. + + +What: /sys/power/wake_unlock +Date: February 2012 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/power/wake_unlock file allows user space to deactivate + wakeup sources created with the help of /sys/power/wake_lock. + When a string is written to /sys/power/wake_unlock, it will be + assumed to represent the name of a wakeup source to deactivate. + If a wakeup source object of that name exists and is active at + the moment, it will be deactivated. + + Reads from this file return a string consisting of the names of + wakeup sources created with the help of /sys/power/wake_lock + that are inactive at the moment, separated with spaces. diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 66725a3d30dc..bc3d9f8c0a90 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -6,7 +6,7 @@ # To add a new book the only step required is to add the book to the # list of DOCBOOKS. -DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \ +DOCBOOKS := z8530book.xml device-drivers.xml \ kernel-hacking.xml kernel-locking.xml deviceiobook.xml \ writing_usb_driver.xml networking.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index 7160652a8736..00687ee9d363 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -212,19 +212,6 @@ X!Edrivers/pci/hotplug.c <sect1><title>PCI Hotplug Support Library</title> !Edrivers/pci/hotplug/pci_hotplug_core.c </sect1> - <sect1><title>MCA Architecture</title> - <sect2><title>MCA Device Functions</title> - <para> - Refer to the file arch/x86/kernel/mca_32.c for more information. - </para> -<!-- FIXME: Removed for now since no structured comments in source -X!Earch/x86/kernel/mca_32.c ---> - </sect2> - <sect2><title>MCA Bus DMA</title> -!Iarch/x86/include/asm/mca_dma.h - </sect2> - </sect1> </chapter> <chapter id="firmware"> diff --git a/Documentation/DocBook/mcabook.tmpl b/Documentation/DocBook/mcabook.tmpl deleted file mode 100644 index 467ccac6ec50..000000000000 --- a/Documentation/DocBook/mcabook.tmpl +++ /dev/null @@ -1,107 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" - "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> - -<book id="MCAGuide"> - <bookinfo> - <title>MCA Driver Programming Interface</title> - - <authorgroup> - <author> - <firstname>Alan</firstname> - <surname>Cox</surname> - <affiliation> - <address> - <email>alan@lxorguk.ukuu.org.uk</email> - </address> - </affiliation> - </author> - <author> - <firstname>David</firstname> - <surname>Weinehall</surname> - </author> - <author> - <firstname>Chris</firstname> - <surname>Beauregard</surname> - </author> - </authorgroup> - - <copyright> - <year>2000</year> - <holder>Alan Cox</holder> - <holder>David Weinehall</holder> - <holder>Chris Beauregard</holder> - </copyright> - - <legalnotice> - <para> - This documentation is free software; you can redistribute - it and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2 of the License, or (at your option) any later - version. - </para> - - <para> - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - </para> - - <para> - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, - MA 02111-1307 USA - </para> - - <para> - For more details see the file COPYING in the source - distribution of Linux. - </para> - </legalnotice> - </bookinfo> - -<toc></toc> - - <chapter id="intro"> - <title>Introduction</title> - <para> - The MCA bus functions provide a generalised interface to find MCA - bus cards, to claim them for a driver, and to read and manipulate POS - registers without being aware of the motherboard internals or - certain deep magic specific to onboard devices. - </para> - <para> - The basic interface to the MCA bus devices is the slot. Each slot - is numbered and virtual slot numbers are assigned to the internal - devices. Using a pci_dev as other busses do does not really make - sense in the MCA context as the MCA bus resources require card - specific interpretation. - </para> - <para> - Finally the MCA bus functions provide a parallel set of DMA - functions mimicing the ISA bus DMA functions as closely as possible, - although also supporting the additional DMA functionality on the - MCA bus controllers. - </para> - </chapter> - <chapter id="bugs"> - <title>Known Bugs And Assumptions</title> - <para> - None. - </para> - </chapter> - - <chapter id="pubfunctions"> - <title>Public Functions Provided</title> -!Edrivers/mca/mca-legacy.c - </chapter> - - <chapter id="dmafunctions"> - <title>DMA Functions Provided</title> -!Iarch/x86/include/asm/mca_dma.h - </chapter> - -</book> diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile index 6628b4b9cac4..362520992ced 100644 --- a/Documentation/DocBook/media/Makefile +++ b/Documentation/DocBook/media/Makefile @@ -70,6 +70,8 @@ IOCTLS = \ VIDIOC_SUBDEV_ENUM_MBUS_CODE \ VIDIOC_SUBDEV_ENUM_FRAME_SIZE \ VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL \ + VIDIOC_SUBDEV_G_SELECTION \ + VIDIOC_SUBDEV_S_SELECTION \ TYPES = \ $(shell perl -ne 'print "$$1 " if /^typedef\s+[^\s]+\s+([^\s]+)\;/' $(srctree)/include/linux/videodev2.h) \ @@ -193,7 +195,7 @@ DVB_DOCUMENTED = \ # install_media_images = \ - $(Q)cp $(OBJIMGFILES) $(MEDIA_OBJ_DIR)/media_api + $(Q)cp $(OBJIMGFILES) $(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api $(MEDIA_OBJ_DIR)/%: $(MEDIA_SRC_DIR)/%.b64 $(Q)base64 -d $< >$@ diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index c7a4ca517859..e633c097a8d1 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -531,6 +531,139 @@ typedef enum fe_delivery_system { here are referring to what can be found in the TMCC-structure - independent of the mode.</para> </section> + <section id="DTV-ATSCMH-FIC-VER"> + <title><constant>DTV_ATSCMH_FIC_VER</constant></title> + <para>Version number of the FIC (Fast Information Channel) signaling data.</para> + <para>FIC is used for relaying information to allow rapid service acquisition by the receiver.</para> + <para>Possible values: 0, 1, 2, 3, ..., 30, 31</para> + </section> + <section id="DTV-ATSCMH-PARADE-ID"> + <title><constant>DTV_ATSCMH_PARADE_ID</constant></title> + <para>Parade identification number</para> + <para>A parade is a collection of up to eight MH groups, conveying one or two ensembles.</para> + <para>Possible values: 0, 1, 2, 3, ..., 126, 127</para> + </section> + <section id="DTV-ATSCMH-NOG"> + <title><constant>DTV_ATSCMH_NOG</constant></title> + <para>Number of MH groups per MH subframe for a designated parade.</para> + <para>Possible values: 1, 2, 3, 4, 5, 6, 7, 8</para> + </section> + <section id="DTV-ATSCMH-TNOG"> + <title><constant>DTV_ATSCMH_TNOG</constant></title> + <para>Total number of MH groups including all MH groups belonging to all MH parades in one MH subframe.</para> + <para>Possible values: 0, 1, 2, 3, ..., 30, 31</para> + </section> + <section id="DTV-ATSCMH-SGN"> + <title><constant>DTV_ATSCMH_SGN</constant></title> + <para>Start group number.</para> + <para>Possible values: 0, 1, 2, 3, ..., 14, 15</para> + </section> + <section id="DTV-ATSCMH-PRC"> + <title><constant>DTV_ATSCMH_PRC</constant></title> + <para>Parade repetition cycle.</para> + <para>Possible values: 1, 2, 3, 4, 5, 6, 7, 8</para> + </section> + <section id="DTV-ATSCMH-RS-FRAME-MODE"> + <title><constant>DTV_ATSCMH_RS_FRAME_MODE</constant></title> + <para>RS frame mode.</para> + <para>Possible values are:</para> +<programlisting> +typedef enum atscmh_rs_frame_mode { + ATSCMH_RSFRAME_PRI_ONLY = 0, + ATSCMH_RSFRAME_PRI_SEC = 1, +} atscmh_rs_frame_mode_t; +</programlisting> + </section> + <section id="DTV-ATSCMH-RS-FRAME-ENSEMBLE"> + <title><constant>DTV_ATSCMH_RS_FRAME_ENSEMBLE</constant></title> + <para>RS frame ensemble.</para> + <para>Possible values are:</para> +<programlisting> +typedef enum atscmh_rs_frame_ensemble { + ATSCMH_RSFRAME_ENS_PRI = 0, + ATSCMH_RSFRAME_ENS_SEC = 1, +} atscmh_rs_frame_ensemble_t; +</programlisting> + </section> + <section id="DTV-ATSCMH-RS-CODE-MODE-PRI"> + <title><constant>DTV_ATSCMH_RS_CODE_MODE_PRI</constant></title> + <para>RS code mode (primary).</para> + <para>Possible values are:</para> +<programlisting> +typedef enum atscmh_rs_code_mode { + ATSCMH_RSCODE_211_187 = 0, + ATSCMH_RSCODE_223_187 = 1, + ATSCMH_RSCODE_235_187 = 2, +} atscmh_rs_code_mode_t; +</programlisting> + </section> + <section id="DTV-ATSCMH-RS-CODE-MODE-SEC"> + <title><constant>DTV_ATSCMH_RS_CODE_MODE_SEC</constant></title> + <para>RS code mode (secondary).</para> + <para>Possible values are:</para> +<programlisting> +typedef enum atscmh_rs_code_mode { + ATSCMH_RSCODE_211_187 = 0, + ATSCMH_RSCODE_223_187 = 1, + ATSCMH_RSCODE_235_187 = 2, +} atscmh_rs_code_mode_t; +</programlisting> + </section> + <section id="DTV-ATSCMH-SCCC-BLOCK-MODE"> + <title><constant>DTV_ATSCMH_SCCC_BLOCK_MODE</constant></title> + <para>Series Concatenated Convolutional Code Block Mode.</para> + <para>Possible values are:</para> +<programlisting> +typedef enum atscmh_sccc_block_mode { + ATSCMH_SCCC_BLK_SEP = 0, + ATSCMH_SCCC_BLK_COMB = 1, +} atscmh_sccc_block_mode_t; +</programlisting> + </section> + <section id="DTV-ATSCMH-SCCC-CODE-MODE-A"> + <title><constant>DTV_ATSCMH_SCCC_CODE_MODE_A</constant></title> + <para>Series Concatenated Convolutional Code Rate.</para> + <para>Possible values are:</para> +<programlisting> +typedef enum atscmh_sccc_code_mode { + ATSCMH_SCCC_CODE_HLF = 0, + ATSCMH_SCCC_CODE_QTR = 1, +} atscmh_sccc_code_mode_t; +</programlisting> + </section> + <section id="DTV-ATSCMH-SCCC-CODE-MODE-B"> + <title><constant>DTV_ATSCMH_SCCC_CODE_MODE_B</constant></title> + <para>Series Concatenated Convolutional Code Rate.</para> + <para>Possible values are:</para> +<programlisting> +typedef enum atscmh_sccc_code_mode { + ATSCMH_SCCC_CODE_HLF = 0, + ATSCMH_SCCC_CODE_QTR = 1, +} atscmh_sccc_code_mode_t; +</programlisting> + </section> + <section id="DTV-ATSCMH-SCCC-CODE-MODE-C"> + <title><constant>DTV_ATSCMH_SCCC_CODE_MODE_C</constant></title> + <para>Series Concatenated Convolutional Code Rate.</para> + <para>Possible values are:</para> +<programlisting> +typedef enum atscmh_sccc_code_mode { + ATSCMH_SCCC_CODE_HLF = 0, + ATSCMH_SCCC_CODE_QTR = 1, +} atscmh_sccc_code_mode_t; +</programlisting> + </section> + <section id="DTV-ATSCMH-SCCC-CODE-MODE-D"> + <title><constant>DTV_ATSCMH_SCCC_CODE_MODE_D</constant></title> + <para>Series Concatenated Convolutional Code Rate.</para> + <para>Possible values are:</para> +<programlisting> +typedef enum atscmh_sccc_code_mode { + ATSCMH_SCCC_CODE_HLF = 0, + ATSCMH_SCCC_CODE_QTR = 1, +} atscmh_sccc_code_mode_t; +</programlisting> + </section> </section> <section id="DTV-API-VERSION"> <title><constant>DTV_API_VERSION</constant></title> @@ -774,6 +907,33 @@ typedef enum fe_hierarchy { <listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem> </itemizedlist> </section> + <section id="atscmh-params"> + <title>ATSC-MH delivery system</title> + <para>The following parameters are valid for ATSC-MH:</para> + <itemizedlist mark='opencircle'> + <listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem> + <listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem> + <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem> + <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem> + <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem> + <listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-FIC-VER"><constant>DTV_ATSCMH_FIC_VER</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-PARADE-ID"><constant>DTV_ATSCMH_PARADE_ID</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-NOG"><constant>DTV_ATSCMH_NOG</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-TNOG"><constant>DTV_ATSCMH_TNOG</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-SGN"><constant>DTV_ATSCMH_SGN</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-PRC"><constant>DTV_ATSCMH_PRC</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-RS-FRAME-MODE"><constant>DTV_ATSCMH_RS_FRAME_MODE</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-RS-FRAME-ENSEMBLE"><constant>DTV_ATSCMH_RS_FRAME_ENSEMBLE</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-CODE-MODE-PRI"><constant>DTV_ATSCMH_CODE_MODE_PRI</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-CODE-MODE-SEC"><constant>DTV_ATSCMH_CODE_MODE_SEC</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-SCCC-BLOCK-MODE"><constant>DTV_ATSCMH_SCCC_BLOCK_MODE</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE_MODE-A"><constant>DTV_ATSCMH_SCCC_CODE_MODE_A</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE_MODE-B"><constant>DTV_ATSCMH_SCCC_CODE_MODE_B</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE_MODE-C"><constant>DTV_ATSCMH_SCCC_CODE_MODE_C</constant></link></para></listitem> + <listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE_MODE-D"><constant>DTV_ATSCMH_SCCC_CODE_MODE_D</constant></link></para></listitem> + </itemizedlist> + </section> </section> <section id="frontend-property-cable-systems"> <title>Properties used on cable delivery systems</title> diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml index 7dc65c592a87..7c49facecd25 100644 --- a/Documentation/DocBook/media/v4l/biblio.xml +++ b/Documentation/DocBook/media/v4l/biblio.xml @@ -197,4 +197,33 @@ in the frequency range from 87,5 to 108,0 MHz</title> <title>NTSC-4: United States RBDS Standard</title> </biblioentry> + <biblioentry id="iso12232"> + <abbrev>ISO 12232:2006</abbrev> + <authorgroup> + <corpauthor>International Organization for Standardization +(<ulink url="http://www.iso.org">http://www.iso.org</ulink>)</corpauthor> + </authorgroup> + <title>Photography — Digital still cameras — Determination + of exposure index, ISO speed ratings, standard output sensitivity, and + recommended exposure index</title> + </biblioentry> + + <biblioentry id="cea861"> + <abbrev>CEA-861-E</abbrev> + <authorgroup> + <corpauthor>Consumer Electronics Association +(<ulink url="http://www.ce.org">http://www.ce.org</ulink>)</corpauthor> + </authorgroup> + <title>A DTV Profile for Uncompressed High Speed Digital Interfaces</title> + </biblioentry> + + <biblioentry id="vesadmt"> + <abbrev>VESA DMT</abbrev> + <authorgroup> + <corpauthor>Video Electronics Standards Association +(<ulink url="http://www.vesa.org">http://www.vesa.org</ulink>)</corpauthor> + </authorgroup> + <title>VESA and Industry Standards and Guidelines for Computer Display Monitor Timing (DMT)</title> + </biblioentry> + </bibliography> diff --git a/Documentation/DocBook/media/v4l/common.xml b/Documentation/DocBook/media/v4l/common.xml index c79278acfb0e..4101aeb56540 100644 --- a/Documentation/DocBook/media/v4l/common.xml +++ b/Documentation/DocBook/media/v4l/common.xml @@ -724,41 +724,49 @@ if (-1 == ioctl (fd, &VIDIOC-S-STD;, &std_id)) { } </programlisting> </example> + </section> <section id="dv-timings"> <title>Digital Video (DV) Timings</title> <para> - The video standards discussed so far has been dealing with Analog TV and the + The video standards discussed so far have been dealing with Analog TV and the corresponding video timings. Today there are many more different hardware interfaces such as High Definition TV interfaces (HDMI), VGA, DVI connectors etc., that carry video signals and there is a need to extend the API to select the video timings for these interfaces. Since it is not possible to extend the &v4l2-std-id; due to -the limited bits available, a new set of IOCTLs is added to set/get video timings at +the limited bits available, a new set of IOCTLs was added to set/get video timings at the input and output: </para><itemizedlist> <listitem> - <para>DV Presets: Digital Video (DV) presets. These are IDs representing a + <para>DV Timings: This will allow applications to define detailed +video timings for the interface. This includes parameters such as width, height, +polarities, frontporch, backporch etc. The <filename>linux/v4l2-dv-timings.h</filename> +header can be used to get the timings of the formats in the <xref linkend="cea861" /> and +<xref linkend="vesadmt" /> standards. + </para> + </listitem> + <listitem> + <para>DV Presets: Digital Video (DV) presets (<emphasis role="bold">deprecated</emphasis>). + These are IDs representing a video timing at the input/output. Presets are pre-defined timings implemented by the hardware according to video standards. A __u32 data type is used to represent a preset unlike the bit mask that is used in &v4l2-std-id; allowing future extensions -to support as many different presets as needed.</para> - </listitem> - <listitem> - <para>Custom DV Timings: This will allow applications to define more detailed -custom video timings for the interface. This includes parameters such as width, height, -polarities, frontporch, backporch etc. - </para> +to support as many different presets as needed. This API is deprecated in favor of the DV Timings +API.</para> </listitem> </itemizedlist> + <para>To enumerate and query the attributes of the DV timings supported by a device, + applications use the &VIDIOC-ENUM-DV-TIMINGS; and &VIDIOC-DV-TIMINGS-CAP; ioctls. + To set DV timings for the device, applications use the +&VIDIOC-S-DV-TIMINGS; ioctl and to get current DV timings they use the +&VIDIOC-G-DV-TIMINGS; ioctl. To detect the DV timings as seen by the video receiver applications +use the &VIDIOC-QUERY-DV-TIMINGS; ioctl.</para> <para>To enumerate and query the attributes of DV presets supported by a device, applications use the &VIDIOC-ENUM-DV-PRESETS; ioctl. To get the current DV preset, applications use the &VIDIOC-G-DV-PRESET; ioctl and to set a preset they use the -&VIDIOC-S-DV-PRESET; ioctl.</para> - <para>To set custom DV timings for the device, applications use the -&VIDIOC-S-DV-TIMINGS; ioctl and to get current custom DV timings they use the -&VIDIOC-G-DV-TIMINGS; ioctl.</para> +&VIDIOC-S-DV-PRESET; ioctl. To detect the preset as seen by the video receiver applications +use the &VIDIOC-QUERY-DV-PRESET; ioctl.</para> <para>Applications can make use of the <xref linkend="input-capabilities" /> and <xref linkend="output-capabilities"/> flags to decide what ioctls are available to set the video timings for the device.</para> - </section> </section> &sub-controls; diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index bce97c50391b..ea42ef824948 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2407,6 +2407,54 @@ details.</para> <para>Added <link linkend="jpeg-controls">JPEG compression control class</link>.</para> </listitem> + <listitem> + <para>Extended the DV Timings API: + &VIDIOC-ENUM-DV-TIMINGS;, &VIDIOC-QUERY-DV-TIMINGS; and + &VIDIOC-DV-TIMINGS-CAP;.</para> + </listitem> + </orderedlist> + </section> + + <section> + <title>V4L2 in Linux 3.5</title> + <orderedlist> + <listitem> + <para>Added integer menus, the new type will be + V4L2_CTRL_TYPE_INTEGER_MENU.</para> + </listitem> + <listitem> + <para>Added selection API for V4L2 subdev interface: + &VIDIOC-SUBDEV-G-SELECTION; and + &VIDIOC-SUBDEV-S-SELECTION;.</para> + </listitem> + <listitem> + <para> Added <constant>V4L2_COLORFX_ANTIQUE</constant>, + <constant>V4L2_COLORFX_ART_FREEZE</constant>, + <constant>V4L2_COLORFX_AQUA</constant>, + <constant>V4L2_COLORFX_SILHOUETTE</constant>, + <constant>V4L2_COLORFX_SOLARIZATION</constant>, + <constant>V4L2_COLORFX_VIVID</constant> and + <constant>V4L2_COLORFX_ARBITRARY_CBCR</constant> menu items + to the <constant>V4L2_CID_COLORFX</constant> control.</para> + </listitem> + <listitem> + <para> Added <constant>V4L2_CID_COLORFX_CBCR</constant> control.</para> + </listitem> + <listitem> + <para> Added camera controls <constant>V4L2_CID_AUTO_EXPOSURE_BIAS</constant>, + <constant>V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE</constant>, + <constant>V4L2_CID_IMAGE_STABILIZATION</constant>, + <constant>V4L2_CID_ISO_SENSITIVITY</constant>, + <constant>V4L2_CID_ISO_SENSITIVITY_AUTO</constant>, + <constant>V4L2_CID_EXPOSURE_METERING</constant>, + <constant>V4L2_CID_SCENE_MODE</constant>, + <constant>V4L2_CID_3A_LOCK</constant>, + <constant>V4L2_CID_AUTO_FOCUS_START</constant>, + <constant>V4L2_CID_AUTO_FOCUS_STOP</constant>, + <constant>V4L2_CID_AUTO_FOCUS_STATUS</constant> and + <constant>V4L2_CID_AUTO_FOCUS_RANGE</constant>. + </para> + </listitem> </orderedlist> </section> @@ -2508,6 +2556,10 @@ and may change in the future.</para> ioctls.</para> </listitem> <listitem> + <para>&VIDIOC-DECODER-CMD; and &VIDIOC-TRY-DECODER-CMD; +ioctls.</para> + </listitem> + <listitem> <para>&VIDIOC-DBG-G-REGISTER; and &VIDIOC-DBG-S-REGISTER; ioctls.</para> </listitem> @@ -2515,6 +2567,10 @@ ioctls.</para> <para>&VIDIOC-DBG-G-CHIP-IDENT; ioctl.</para> </listitem> <listitem> + <para>&VIDIOC-ENUM-DV-TIMINGS;, &VIDIOC-QUERY-DV-TIMINGS; and + &VIDIOC-DV-TIMINGS-CAP; ioctls.</para> + </listitem> + <listitem> <para>Flash API. <xref linkend="flash-controls" /></para> </listitem> <listitem> @@ -2523,6 +2579,14 @@ ioctls.</para> <listitem> <para>Selection API. <xref linkend="selection-api" /></para> </listitem> + <listitem> + <para>Sub-device selection API: &VIDIOC-SUBDEV-G-SELECTION; + and &VIDIOC-SUBDEV-S-SELECTION; ioctls.</para> + </listitem> + <listitem> + <para><link linkend="v4l2-auto-focus-area"><constant> + V4L2_CID_AUTO_FOCUS_AREA</constant></link> control.</para> + </listitem> </itemizedlist> </section> @@ -2538,6 +2602,17 @@ interfaces and should not be implemented in new drivers.</para> <constant>VIDIOC_S_MPEGCOMP</constant> ioctls. Use Extended Controls, <xref linkend="extended-controls" />.</para> </listitem> + <listitem> + <para>&VIDIOC-G-DV-PRESET;, &VIDIOC-S-DV-PRESET;, &VIDIOC-ENUM-DV-PRESETS; and + &VIDIOC-QUERY-DV-PRESET; ioctls. Use the DV Timings API (<xref linkend="dv-timings" />).</para> + </listitem> + <listitem> + <para><constant>VIDIOC_SUBDEV_G_CROP</constant> and + <constant>VIDIOC_SUBDEV_S_CROP</constant> ioctls. Use + <constant>VIDIOC_SUBDEV_G_SELECTION</constant> and + <constant>VIDIOC_SUBDEV_S_SELECTION</constant>, <xref + linkend="vidioc-subdev-g-selection" />.</para> + </listitem> </itemizedlist> </section> </section> diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index dd03cf4a6539..676bc46f9c52 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -285,18 +285,92 @@ minimum value disables backlight compensation.</entry> <row id="v4l2-colorfx"> <entry><constant>V4L2_CID_COLORFX</constant></entry> <entry>enum</entry> - <entry>Selects a color effect. Possible values for -<constant>enum v4l2_colorfx</constant> are: -<constant>V4L2_COLORFX_NONE</constant> (0), -<constant>V4L2_COLORFX_BW</constant> (1), -<constant>V4L2_COLORFX_SEPIA</constant> (2), -<constant>V4L2_COLORFX_NEGATIVE</constant> (3), -<constant>V4L2_COLORFX_EMBOSS</constant> (4), -<constant>V4L2_COLORFX_SKETCH</constant> (5), -<constant>V4L2_COLORFX_SKY_BLUE</constant> (6), -<constant>V4L2_COLORFX_GRASS_GREEN</constant> (7), -<constant>V4L2_COLORFX_SKIN_WHITEN</constant> (8) and -<constant>V4L2_COLORFX_VIVID</constant> (9).</entry> + <entry>Selects a color effect. The following values are defined: + </entry> + </row><row> + <entry></entry> + <entry></entry> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_COLORFX_NONE</constant> </entry> + <entry>Color effect is disabled.</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_ANTIQUE</constant> </entry> + <entry>An aging (old photo) effect.</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_ART_FREEZE</constant> </entry> + <entry>Frost color effect.</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_AQUA</constant> </entry> + <entry>Water color, cool tone.</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_BW</constant> </entry> + <entry>Black and white.</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_EMBOSS</constant> </entry> + <entry>Emboss, the highlights and shadows replace light/dark boundaries + and low contrast areas are set to a gray background.</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_GRASS_GREEN</constant> </entry> + <entry>Grass green.</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_NEGATIVE</constant> </entry> + <entry>Negative.</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_SEPIA</constant> </entry> + <entry>Sepia tone.</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_SKETCH</constant> </entry> + <entry>Sketch.</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_SKIN_WHITEN</constant> </entry> + <entry>Skin whiten.</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_SKY_BLUE</constant> </entry> + <entry>Sky blue.</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_SOLARIZATION</constant> </entry> + <entry>Solarization, the image is partially reversed in tone, + only color values above or below a certain threshold are inverted. + </entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_SILHOUETTE</constant> </entry> + <entry>Silhouette (outline).</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_VIVID</constant> </entry> + <entry>Vivid colors.</entry> + </row> + <row> + <entry><constant>V4L2_COLORFX_SET_CBCR</constant> </entry> + <entry>The Cb and Cr chroma components are replaced by fixed + coefficients determined by <constant>V4L2_CID_COLORFX_CBCR</constant> + control.</entry> + </row> + </tbody> + </entrytbl> + </row> + <row> + <entry><constant>V4L2_CID_COLORFX_CBCR</constant></entry> + <entry>integer</entry> + <entry>Determines the Cb and Cr coefficients for <constant>V4L2_COLORFX_SET_CBCR</constant> + color effect. Bits [7:0] of the supplied 32 bit value are interpreted as + Cr component, bits [15:8] as Cb component and bits [31:16] must be zero. + </entry> </row> <row> <entry><constant>V4L2_CID_ROTATE</constant></entry> @@ -2775,6 +2849,51 @@ remain constant.</entry> <row><entry></entry></row> <row> + <entry spanname="id"><constant>V4L2_CID_EXPOSURE_BIAS</constant> </entry> + <entry>integer menu</entry> + </row><row><entry spanname="descr"> Determines the automatic +exposure compensation, it is effective only when <constant>V4L2_CID_EXPOSURE_AUTO</constant> +control is set to <constant>AUTO</constant>, <constant>SHUTTER_PRIORITY </constant> +or <constant>APERTURE_PRIORITY</constant>. +It is expressed in terms of EV, drivers should interpret the values as 0.001 EV +units, where the value 1000 stands for +1 EV. +<para>Increasing the exposure compensation value is equivalent to decreasing +the exposure value (EV) and will increase the amount of light at the image +sensor. The camera performs the exposure compensation by adjusting absolute +exposure time and/or aperture.</para></entry> + </row> + <row><entry></entry></row> + + <row id="v4l2-exposure-metering"> + <entry spanname="id"><constant>V4L2_CID_EXPOSURE_METERING</constant> </entry> + <entry>enum v4l2_exposure_metering</entry> + </row><row><entry spanname="descr">Determines how the camera measures +the amount of light available for the frame exposure. Possible values are:</entry> + </row> + <row> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_EXPOSURE_METERING_AVERAGE</constant> </entry> + <entry>Use the light information coming from the entire frame +and average giving no weighting to any particular portion of the metered area. + </entry> + </row> + <row> + <entry><constant>V4L2_EXPOSURE_METERING_CENTER_WEIGHTED</constant> </entry> + <entry>Average the light information coming from the entire frame +giving priority to the center of the metered area.</entry> + </row> + <row> + <entry><constant>V4L2_EXPOSURE_METERING_SPOT</constant> </entry> + <entry>Measure only very small area at the center of the frame.</entry> + </row> + </tbody> + </entrytbl> + </row> + <row><entry></entry></row> + + <row> <entry spanname="id"><constant>V4L2_CID_PAN_RELATIVE</constant> </entry> <entry>integer</entry> </row><row><entry spanname="descr">This control turns the @@ -2857,13 +2976,107 @@ negative values towards infinity. This is a write-only control.</entry> <row> <entry spanname="id"><constant>V4L2_CID_FOCUS_AUTO</constant> </entry> <entry>boolean</entry> - </row><row><entry spanname="descr">Enables automatic focus -adjustments. The effect of manual focus adjustments while this feature + </row><row><entry spanname="descr">Enables continuous automatic +focus adjustments. The effect of manual focus adjustments while this feature is enabled is undefined, drivers should ignore such requests.</entry> </row> <row><entry></entry></row> <row> + <entry spanname="id"><constant>V4L2_CID_AUTO_FOCUS_START</constant> </entry> + <entry>button</entry> + </row><row><entry spanname="descr">Starts single auto focus process. +The effect of setting this control when <constant>V4L2_CID_FOCUS_AUTO</constant> +is set to <constant>TRUE</constant> (1) is undefined, drivers should ignore +such requests.</entry> + </row> + <row><entry></entry></row> + + <row> + <entry spanname="id"><constant>V4L2_CID_AUTO_FOCUS_STOP</constant> </entry> + <entry>button</entry> + </row><row><entry spanname="descr">Aborts automatic focusing +started with <constant>V4L2_CID_AUTO_FOCUS_START</constant> control. It is +effective only when the continuous autofocus is disabled, that is when +<constant>V4L2_CID_FOCUS_AUTO</constant> control is set to <constant>FALSE +</constant> (0).</entry> + </row> + <row><entry></entry></row> + + <row id="v4l2-auto-focus-status"> + <entry spanname="id"> + <constant>V4L2_CID_AUTO_FOCUS_STATUS</constant> </entry> + <entry>bitmask</entry> + </row> + <row><entry spanname="descr">The automatic focus status. This is a read-only + control.</entry> + </row> + <row> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_AUTO_FOCUS_STATUS_IDLE</constant> </entry> + <entry>Automatic focus is not active.</entry> + </row> + <row> + <entry><constant>V4L2_AUTO_FOCUS_STATUS_BUSY</constant> </entry> + <entry>Automatic focusing is in progress.</entry> + </row> + <row> + <entry><constant>V4L2_AUTO_FOCUS_STATUS_REACHED</constant> </entry> + <entry>Focus has been reached.</entry> + </row> + <row> + <entry><constant>V4L2_AUTO_FOCUS_STATUS_FAILED</constant> </entry> + <entry>Automatic focus has failed, the driver will not + transition from this state until another action is + performed by an application.</entry> + </row> + </tbody> + </entrytbl> + </row> + <row><entry spanname="descr"> +Setting <constant>V4L2_LOCK_FOCUS</constant> lock bit of the <constant>V4L2_CID_3A_LOCK +</constant> control may stop updates of the <constant>V4L2_CID_AUTO_FOCUS_STATUS</constant> +control value.</entry> + </row> + <row><entry></entry></row> + + <row id="v4l2-auto-focus-range"> + <entry spanname="id"> + <constant>V4L2_CID_AUTO_FOCUS_RANGE</constant> </entry> + <entry>enum v4l2_auto_focus_range</entry> + </row> + <row><entry spanname="descr">Determines auto focus distance range +for which lens may be adjusted. </entry> + </row> + <row> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_AUTO_FOCUS_RANGE_AUTO</constant> </entry> + <entry>The camera automatically selects the focus range.</entry> + </row> + <row> + <entry><constant>V4L2_AUTO_FOCUS_RANGE_NORMAL</constant> </entry> + <entry>Normal distance range, limited for best automatic focus +performance.</entry> + </row> + <row> + <entry><constant>V4L2_AUTO_FOCUS_RANGE_MACRO</constant> </entry> + <entry>Macro (close-up) auto focus. The camera will +use its minimum possible distance for auto focus.</entry> + </row> + <row> + <entry><constant>V4L2_AUTO_FOCUS_RANGE_INFINITY</constant> </entry> + <entry>The lens is set to focus on an object at infinite distance.</entry> + </row> + </tbody> + </entrytbl> + </row> + <row><entry></entry></row> + + <row> <entry spanname="id"><constant>V4L2_CID_ZOOM_ABSOLUTE</constant> </entry> <entry>integer</entry> </row><row><entry spanname="descr">Specify the objective lens @@ -2932,6 +3145,295 @@ camera sensor on or off, or specify its strength. Such band-stop filters can be used, for example, to filter out the fluorescent light component.</entry> </row> <row><entry></entry></row> + + <row id="v4l2-auto-n-preset-white-balance"> + <entry spanname="id"><constant>V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE</constant> </entry> + <entry>enum v4l2_auto_n_preset_white_balance</entry> + </row><row><entry spanname="descr">Sets white balance to automatic, +manual or a preset. The presets determine color temperature of the light as +a hint to the camera for white balance adjustments resulting in most accurate +color representation. The following white balance presets are listed in order +of increasing color temperature.</entry> + </row> + <row> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_WHITE_BALANCE_MANUAL</constant> </entry> + <entry>Manual white balance.</entry> + </row> + <row> + <entry><constant>V4L2_WHITE_BALANCE_AUTO</constant> </entry> + <entry>Automatic white balance adjustments.</entry> + </row> + <row> + <entry><constant>V4L2_WHITE_BALANCE_INCANDESCENT</constant> </entry> + <entry>White balance setting for incandescent (tungsten) lighting. +It generally cools down the colors and corresponds approximately to 2500...3500 K +color temperature range.</entry> + </row> + <row> + <entry><constant>V4L2_WHITE_BALANCE_FLUORESCENT</constant> </entry> + <entry>White balance preset for fluorescent lighting. +It corresponds approximately to 4000...5000 K color temperature.</entry> + </row> + <row> + <entry><constant>V4L2_WHITE_BALANCE_FLUORESCENT_H</constant> </entry> + <entry>With this setting the camera will compensate for +fluorescent H lighting.</entry> + </row> + <row> + <entry><constant>V4L2_WHITE_BALANCE_HORIZON</constant> </entry> + <entry>White balance setting for horizon daylight. +It corresponds approximately to 5000 K color temperature.</entry> + </row> + <row> + <entry><constant>V4L2_WHITE_BALANCE_DAYLIGHT</constant> </entry> + <entry>White balance preset for daylight (with clear sky). +It corresponds approximately to 5000...6500 K color temperature.</entry> + </row> + <row> + <entry><constant>V4L2_WHITE_BALANCE_FLASH</constant> </entry> + <entry>With this setting the camera will compensate for the flash +light. It slightly warms up the colors and corresponds roughly to 5000...5500 K +color temperature.</entry> + </row> + <row> + <entry><constant>V4L2_WHITE_BALANCE_CLOUDY</constant> </entry> + <entry>White balance preset for moderately overcast sky. +This option corresponds approximately to 6500...8000 K color temperature +range.</entry> + </row> + <row> + <entry><constant>V4L2_WHITE_BALANCE_SHADE</constant> </entry> + <entry>White balance preset for shade or heavily overcast +sky. It corresponds approximately to 9000...10000 K color temperature. +</entry> + </row> + </tbody> + </entrytbl> + </row> + <row><entry></entry></row> + + <row id="v4l2-wide-dynamic-range"> + <entry spanname="id"><constant>V4L2_CID_WIDE_DYNAMIC_RANGE</constant></entry> + <entry>boolean</entry> + </row> + <row> + <entry spanname="descr">Enables or disables the camera's wide dynamic +range feature. This feature allows to obtain clear images in situations where +intensity of the illumination varies significantly throughout the scene, i.e. +there are simultaneously very dark and very bright areas. It is most commonly +realized in cameras by combining two subsequent frames with different exposure +times. <footnote id="ctypeconv"><para> This control may be changed to a menu +control in the future, if more options are required.</para></footnote></entry> + </row> + <row><entry></entry></row> + + <row id="v4l2-image-stabilization"> + <entry spanname="id"><constant>V4L2_CID_IMAGE_STABILIZATION</constant></entry> + <entry>boolean</entry> + </row> + <row> + <entry spanname="descr">Enables or disables image stabilization. + <footnoteref linkend="ctypeconv"/></entry> + </row> + <row><entry></entry></row> + + <row> + <entry spanname="id"><constant>V4L2_CID_ISO_SENSITIVITY</constant> </entry> + <entry>integer menu</entry> + </row><row><entry spanname="descr">Determines ISO equivalent of an +image sensor indicating the sensor's sensitivity to light. The numbers are +expressed in arithmetic scale, as per <xref linkend="iso12232" /> standard, +where doubling the sensor sensitivity is represented by doubling the numerical +ISO value. Applications should interpret the values as standard ISO values +multiplied by 1000, e.g. control value 800 stands for ISO 0.8. Drivers will +usually support only a subset of standard ISO values. The effect of setting +this control while the <constant>V4L2_CID_ISO_SENSITIVITY_AUTO</constant> +control is set to a value other than <constant>V4L2_CID_ISO_SENSITIVITY_MANUAL +</constant> is undefined, drivers should ignore such requests.</entry> + </row> + <row><entry></entry></row> + + <row id="v4l2-iso-sensitivity-auto-type"> + <entry spanname="id"><constant>V4L2_CID_ISO_SENSITIVITY_AUTO</constant> </entry> + <entry>enum v4l2_iso_sensitivity_type</entry> + </row><row><entry spanname="descr">Enables or disables automatic ISO +sensitivity adjustments.</entry> + </row> + <row> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_CID_ISO_SENSITIVITY_MANUAL</constant> </entry> + <entry>Manual ISO sensitivity.</entry> + </row> + <row> + <entry><constant>V4L2_CID_ISO_SENSITIVITY_AUTO</constant> </entry> + <entry>Automatic ISO sensitivity adjustments.</entry> + </row> + </tbody> + </entrytbl> + </row> + <row><entry></entry></row> + + <row id="v4l2-scene-mode"> + <entry spanname="id"><constant>V4L2_CID_SCENE_MODE</constant> </entry> + <entry>enum v4l2_scene_mode</entry> + </row><row><entry spanname="descr">This control allows to select +scene programs as the camera automatic modes optimized for common shooting +scenes. Within these modes the camera determines best exposure, aperture, +focusing, light metering, white balance and equivalent sensitivity. The +controls of those parameters are influenced by the scene mode control. +An exact behavior in each mode is subject to the camera specification. + +<para>When the scene mode feature is not used, this control should be set to +<constant>V4L2_SCENE_MODE_NONE</constant> to make sure the other possibly +related controls are accessible. The following scene programs are defined: +</para> +</entry> + </row> + <row> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_SCENE_MODE_NONE</constant> </entry> + <entry>The scene mode feature is disabled.</entry> + </row> + <row> + <entry><constant>V4L2_SCENE_MODE_BACKLIGHT</constant> </entry> + <entry>Backlight. Compensates for dark shadows when light is + coming from behind a subject, also by automatically turning + on the flash.</entry> + </row> + <row> + <entry><constant>V4L2_SCENE_MODE_BEACH_SNOW</constant> </entry> + <entry>Beach and snow. This mode compensates for all-white or +bright scenes, which tend to look gray and low contrast, when camera's automatic +exposure is based on an average scene brightness. To compensate, this mode +automatically slightly overexposes the frames. The white balance may also be +adjusted to compensate for the fact that reflected snow looks bluish rather +than white.</entry> + </row> + <row> + <entry><constant>V4L2_SCENE_MODE_CANDLELIGHT</constant> </entry> + <entry>Candle light. The camera generally raises the ISO +sensitivity and lowers the shutter speed. This mode compensates for relatively +close subject in the scene. The flash is disabled in order to preserve the +ambiance of the light.</entry> + </row> + <row> + <entry><constant>V4L2_SCENE_MODE_DAWN_DUSK</constant> </entry> + <entry>Dawn and dusk. Preserves the colors seen in low +natural light before dusk and after down. The camera may turn off the flash, +and automatically focus at infinity. It will usually boost saturation and +lower the shutter speed.</entry> + </row> + <row> + <entry><constant>V4L2_SCENE_MODE_FALL_COLORS</constant> </entry> + <entry>Fall colors. Increases saturation and adjusts white +balance for color enhancement. Pictures of autumn leaves get saturated reds +and yellows.</entry> + </row> + <row> + <entry><constant>V4L2_SCENE_MODE_FIREWORKS</constant> </entry> + <entry>Fireworks. Long exposure times are used to capture +the expanding burst of light from a firework. The camera may invoke image +stabilization.</entry> + </row> + <row> + <entry><constant>V4L2_SCENE_MODE_LANDSCAPE</constant> </entry> + <entry>Landscape. The camera may choose a small aperture to +provide deep depth of field and long exposure duration to help capture detail +in dim light conditions. The focus is fixed at infinity. Suitable for distant +and wide scenery.</entry> + </row> + <row> + <entry><constant>V4L2_SCENE_MODE_NIGHT</constant> </entry> + <entry>Night, also known as Night Landscape. Designed for low +light conditions, it preserves detail in the dark areas without blowing out bright +objects. The camera generally sets itself to a medium-to-high ISO sensitivity, +with a relatively long exposure time, and turns flash off. As such, there will be +increased image noise and the possibility of blurred image.</entry> + </row> + <row> + <entry><constant>V4L2_SCENE_MODE_PARTY_INDOOR</constant> </entry> + <entry>Party and indoor. Designed to capture indoor scenes +that are lit by indoor background lighting as well as the flash. The camera +usually increases ISO sensitivity, and adjusts exposure for the low light +conditions.</entry> + </row> + <row> + <entry><constant>V4L2_SCENE_MODE_PORTRAIT</constant> </entry> + <entry>Portrait. The camera adjusts the aperture so that the +depth of field is reduced, which helps to isolate the subject against a smooth +background. Most cameras recognize the presence of faces in the scene and focus +on them. The color hue is adjusted to enhance skin tones. The intensity of the +flash is often reduced.</entry> + </row> + <row> + <entry><constant>V4L2_SCENE_MODE_SPORTS</constant> </entry> + <entry>Sports. Significantly increases ISO and uses a fast +shutter speed to freeze motion of rapidly-moving subjects. Increased image +noise may be seen in this mode.</entry> + </row> + <row> + <entry><constant>V4L2_SCENE_MODE_SUNSET</constant> </entry> + <entry>Sunset. Preserves deep hues seen in sunsets and +sunrises. It bumps up the saturation.</entry> + </row> + <row> + <entry><constant>V4L2_SCENE_MODE_TEXT</constant> </entry> + <entry>Text. It applies extra contrast and sharpness, it is +typically a black-and-white mode optimized for readability. Automatic focus +may be switched to close-up mode and this setting may also involve some +lens-distortion correction.</entry> + </row> + </tbody> + </entrytbl> + </row> + <row><entry></entry></row> + + <row> + <entry spanname="id"><constant>V4L2_CID_3A_LOCK</constant></entry> + <entry>bitmask</entry> + </row> + <row> + <entry spanname="descr">This control locks or unlocks the automatic +focus, exposure and white balance. The automatic adjustments can be paused +independently by setting the corresponding lock bit to 1. The camera then retains +the settings until the lock bit is cleared. The following lock bits are defined: +</entry> + </row> + <row> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_LOCK_EXPOSURE</constant></entry> + <entry>Automatic exposure adjustments lock.</entry> + </row> + <row> + <entry><constant>V4L2_LOCK_WHITE_BALANCE</constant></entry> + <entry>Automatic white balance adjustments lock.</entry> + </row> + <row> + <entry><constant>V4L2_LOCK_FOCUS</constant></entry> + <entry>Automatic focus lock.</entry> + </row> + </tbody> + </entrytbl> + </row> + <row><entry spanname="descr"> +When a given algorithm is not enabled, drivers should ignore requests +to lock it and should return no error. An example might be an application +setting bit <constant>V4L2_LOCK_WHITE_BALANCE</constant> when the +<constant>V4L2_CID_AUTO_WHITE_BALANCE</constant> control is set to +<constant>FALSE</constant>. The value of this control may be changed +by exposure, white balance or focus controls.</entry> + </row> + <row><entry></entry></row> + </tbody> </tgroup> </table> @@ -3476,7 +3978,7 @@ interface and may change in the future.</para> <entry spanname="id"><constant>V4L2_CID_JPEG_CHROMA_SUBSAMPLING</constant></entry> <entry>menu</entry> </row> - <row id="jpeg-chroma-subsampling-control"> + <row id="v4l2-jpeg-chroma-subsampling"> <entry spanname="descr">The chroma subsampling factors describe how each component of an input image is sampled, in respect to maximum sample rate in each spatial dimension. See <xref linkend="itu-t81"/>, @@ -3486,7 +3988,7 @@ interface and may change in the future.</para> from RGB to Y'CbCr color space. </entry> </row> - <row> + <row id = "v4l2-jpeg-chroma-subsampling"> <entrytbl spanname="descr" cols="2"> <tbody valign="top"> <row> @@ -3538,12 +4040,12 @@ interface and may change in the future.</para> </entry> </row> <row id="jpeg-quality-control"> - <entry spanname="id"><constant>V4L2_CID_JPEG_COMPRESION_QUALITY</constant></entry> + <entry spanname="id"><constant>V4L2_CID_JPEG_COMPRESSION_QUALITY</constant></entry> <entry>integer</entry> </row> <row> <entry spanname="descr"> - <constant>V4L2_CID_JPEG_COMPRESION_QUALITY</constant> control + <constant>V4L2_CID_JPEG_COMPRESSION_QUALITY</constant> control determines trade-off between image quality and size. It provides simpler method for applications to control image quality, without a need for direct reconfiguration of luminance and chrominance @@ -3551,7 +4053,7 @@ interface and may change in the future.</para> In cases where a driver uses quantization tables configured directly by an application, using interfaces defined elsewhere, <constant> - V4L2_CID_JPEG_COMPRESION_QUALITY</constant> control should be set + V4L2_CID_JPEG_COMPRESSION_QUALITY</constant> control should be set by driver to 0. <para>The value range of this control is driver-specific. Only @@ -3599,4 +4101,172 @@ interface and may change in the future.</para> to <xref linkend="itu-t81"/>, <xref linkend="jfif"/>, <xref linkend="w3c-jpeg-jfif"/>.</para> </section> + + <section id="image-source-controls"> + <title>Image Source Control Reference</title> + + <note> + <title>Experimental</title> + + <para>This is an <link + linkend="experimental">experimental</link> interface and may + change in the future.</para> + </note> + + <para> + The Image Source control class is intended for low-level + control of image source devices such as image sensors. The + devices feature an analogue to digital converter and a bus + transmitter to transmit the image data out of the device. + </para> + + <table pgwide="1" frame="none" id="image-source-control-id"> + <title>Image Source Control IDs</title> + + <tgroup cols="4"> + <colspec colname="c1" colwidth="1*" /> + <colspec colname="c2" colwidth="6*" /> + <colspec colname="c3" colwidth="2*" /> + <colspec colname="c4" colwidth="6*" /> + <spanspec namest="c1" nameend="c2" spanname="id" /> + <spanspec namest="c2" nameend="c4" spanname="descr" /> + <thead> + <row> + <entry spanname="id" align="left">ID</entry> + <entry align="left">Type</entry> + </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> + </row> + </thead> + <tbody valign="top"> + <row><entry></entry></row> + <row> + <entry spanname="id"><constant>V4L2_CID_IMAGE_SOURCE_CLASS</constant></entry> + <entry>class</entry> + </row> + <row> + <entry spanname="descr">The IMAGE_SOURCE class descriptor.</entry> + </row> + <row> + <entry spanname="id"><constant>V4L2_CID_VBLANK</constant></entry> + <entry>integer</entry> + </row> + <row> + <entry spanname="descr">Vertical blanking. The idle period + after every frame during which no image data is produced. + The unit of vertical blanking is a line. Every line has + length of the image width plus horizontal blanking at the + pixel rate defined by + <constant>V4L2_CID_PIXEL_RATE</constant> control in the + same sub-device.</entry> + </row> + <row> + <entry spanname="id"><constant>V4L2_CID_HBLANK</constant></entry> + <entry>integer</entry> + </row> + <row> + <entry spanname="descr">Horizontal blanking. The idle + period after every line of image data during which no + image data is produced. The unit of horizontal blanking is + pixels.</entry> + </row> + <row> + <entry spanname="id"><constant>V4L2_CID_ANALOGUE_GAIN</constant></entry> + <entry>integer</entry> + </row> + <row> + <entry spanname="descr">Analogue gain is gain affecting + all colour components in the pixel matrix. The gain + operation is performed in the analogue domain before A/D + conversion. + </entry> + </row> + <row><entry></entry></row> + </tbody> + </tgroup> + </table> + + </section> + + <section id="image-process-controls"> + <title>Image Process Control Reference</title> + + <note> + <title>Experimental</title> + + <para>This is an <link + linkend="experimental">experimental</link> interface and may + change in the future.</para> + </note> + + <para> + The Image Source control class is intended for low-level control of + image processing functions. Unlike + <constant>V4L2_CID_IMAGE_SOURCE_CLASS</constant>, the controls in + this class affect processing the image, and do not control capturing + of it. + </para> + + <table pgwide="1" frame="none" id="image-process-control-id"> + <title>Image Source Control IDs</title> + + <tgroup cols="4"> + <colspec colname="c1" colwidth="1*" /> + <colspec colname="c2" colwidth="6*" /> + <colspec colname="c3" colwidth="2*" /> + <colspec colname="c4" colwidth="6*" /> + <spanspec namest="c1" nameend="c2" spanname="id" /> + <spanspec namest="c2" nameend="c4" spanname="descr" /> + <thead> + <row> + <entry spanname="id" align="left">ID</entry> + <entry align="left">Type</entry> + </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> + </row> + </thead> + <tbody valign="top"> + <row><entry></entry></row> + <row> + <entry spanname="id"><constant>V4L2_CID_IMAGE_PROC_CLASS</constant></entry> + <entry>class</entry> + </row> + <row> + <entry spanname="descr">The IMAGE_PROC class descriptor.</entry> + </row> + <row> + <entry spanname="id"><constant>V4L2_CID_LINK_FREQ</constant></entry> + <entry>integer menu</entry> + </row> + <row> + <entry spanname="descr">Data bus frequency. Together with the + media bus pixel code, bus type (clock cycles per sample), the + data bus frequency defines the pixel rate + (<constant>V4L2_CID_PIXEL_RATE</constant>) in the + pixel array (or possibly elsewhere, if the device is not an + image sensor). The frame rate can be calculated from the pixel + clock, image width and height and horizontal and vertical + blanking. While the pixel rate control may be defined elsewhere + than in the subdev containing the pixel array, the frame rate + cannot be obtained from that information. This is because only + on the pixel array it can be assumed that the vertical and + horizontal blanking information is exact: no other blanking is + allowed in the pixel array. The selection of frame rate is + performed by selecting the desired horizontal and vertical + blanking. The unit of this control is Hz. </entry> + </row> + <row> + <entry spanname="id"><constant>V4L2_CID_PIXEL_RATE</constant></entry> + <entry>64-bit integer</entry> + </row> + <row> + <entry spanname="descr">Pixel rate in the source pads of + the subdev. This control is read-only and its unit is + pixels / second. + </entry> + </row> + <row><entry></entry></row> + </tbody> + </tgroup> + </table> + + </section> </section> diff --git a/Documentation/DocBook/media/v4l/dev-subdev.xml b/Documentation/DocBook/media/v4l/dev-subdev.xml index 0916a7343a16..4afcbbec5eda 100644 --- a/Documentation/DocBook/media/v4l/dev-subdev.xml +++ b/Documentation/DocBook/media/v4l/dev-subdev.xml @@ -76,11 +76,12 @@ <wordasword>format</wordasword> means the combination of media bus data format, frame width and frame height.</para></note> - <para>Image formats are typically negotiated on video capture and output - devices using the <link linkend="crop">cropping and scaling</link> ioctls. - The driver is responsible for configuring every block in the video pipeline - according to the requested format at the pipeline input and/or - output.</para> + <para>Image formats are typically negotiated on video capture and + output devices using the format and <link + linkend="vidioc-subdev-g-selection">selection</link> ioctls. The + driver is responsible for configuring every block in the video + pipeline according to the requested format at the pipeline input + and/or output.</para> <para>For complex devices, such as often found in embedded systems, identical image sizes at the output of a pipeline can be achieved using @@ -276,11 +277,11 @@ </section> <section> - <title>Cropping and scaling</title> + <title>Selections: cropping, scaling and composition</title> <para>Many sub-devices support cropping frames on their input or output pads (or possible even on both). Cropping is used to select the area of - interest in an image, typically on a video sensor or video decoder. It can + interest in an image, typically on an image sensor or a video decoder. It can also be used as part of digital zoom implementations to select the area of the image that will be scaled up.</para> @@ -288,26 +289,179 @@ &v4l2-rect; by the coordinates of the top left corner and the rectangle size. Both the coordinates and sizes are expressed in pixels.</para> - <para>The crop rectangle is retrieved and set using the - &VIDIOC-SUBDEV-G-CROP; and &VIDIOC-SUBDEV-S-CROP; ioctls. Like for pad - formats, drivers store try and active crop rectangles. The format - negotiation mechanism applies to crop settings as well.</para> - - <para>On input pads, cropping is applied relatively to the current pad - format. The pad format represents the image size as received by the - sub-device from the previous block in the pipeline, and the crop rectangle - represents the sub-image that will be transmitted further inside the - sub-device for processing. The crop rectangle be entirely containted - inside the input image size.</para> - - <para>Input crop rectangle are reset to their default value when the input - image format is modified. Drivers should use the input image size as the - crop rectangle default value, but hardware requirements may prevent this. - </para> + <para>As for pad formats, drivers store try and active + rectangles for the selection targets of ACTUAL type <xref + linkend="v4l2-subdev-selection-targets">.</xref></para> + + <para>On sink pads, cropping is applied relative to the + current pad format. The pad format represents the image size as + received by the sub-device from the previous block in the + pipeline, and the crop rectangle represents the sub-image that + will be transmitted further inside the sub-device for + processing.</para> + + <para>The scaling operation changes the size of the image by + scaling it to new dimensions. The scaling ratio isn't specified + explicitly, but is implied from the original and scaled image + sizes. Both sizes are represented by &v4l2-rect;.</para> + + <para>Scaling support is optional. When supported by a subdev, + the crop rectangle on the subdev's sink pad is scaled to the + size configured using the &VIDIOC-SUBDEV-S-SELECTION; IOCTL + using <constant>V4L2_SUBDEV_SEL_COMPOSE_ACTUAL</constant> + selection target on the same pad. If the subdev supports scaling + but not composing, the top and left values are not used and must + always be set to zero.</para> + + <para>On source pads, cropping is similar to sink pads, with the + exception that the source size from which the cropping is + performed, is the COMPOSE rectangle on the sink pad. In both + sink and source pads, the crop rectangle must be entirely + contained inside the source image size for the crop + operation.</para> + + <para>The drivers should always use the closest possible + rectangle the user requests on all selection targets, unless + specifically told otherwise. + <constant>V4L2_SUBDEV_SEL_FLAG_SIZE_GE</constant> and + <constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant> flags may be + used to round the image size either up or down. <xref + linkend="v4l2-subdev-selection-flags"></xref></para> + </section> + + <section> + <title>Types of selection targets</title> + + <section> + <title>ACTUAL targets</title> + + <para>ACTUAL targets reflect the actual hardware configuration + at any point of time. There is a BOUNDS target + corresponding to every ACTUAL.</para> + </section> + + <section> + <title>BOUNDS targets</title> + + <para>BOUNDS targets is the smallest rectangle that contains + all valid ACTUAL rectangles. It may not be possible to set the + ACTUAL rectangle as large as the BOUNDS rectangle, however. + This may be because e.g. a sensor's pixel array is not + rectangular but cross-shaped or round. The maximum size may + also be smaller than the BOUNDS rectangle.</para> + </section> - <para>Cropping behaviour on output pads is not defined.</para> + </section> + + <section> + <title>Order of configuration and format propagation</title> + + <para>Inside subdevs, the order of image processing steps will + always be from the sink pad towards the source pad. This is also + reflected in the order in which the configuration must be + performed by the user: the changes made will be propagated to + any subsequent stages. If this behaviour is not desired, the + user must set + <constant>V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG</constant> flag. This + flag causes no propagation of the changes are allowed in any + circumstances. This may also cause the accessed rectangle to be + adjusted by the driver, depending on the properties of the + underlying hardware.</para> + + <para>The coordinates to a step always refer to the actual size + of the previous step. The exception to this rule is the source + compose rectangle, which refers to the sink compose bounds + rectangle --- if it is supported by the hardware.</para> + + <orderedlist> + <listitem>Sink pad format. The user configures the sink pad + format. This format defines the parameters of the image the + entity receives through the pad for further processing.</listitem> + + <listitem>Sink pad actual crop selection. The sink pad crop + defines the crop performed to the sink pad format.</listitem> + + <listitem>Sink pad actual compose selection. The size of the + sink pad compose rectangle defines the scaling ratio compared + to the size of the sink pad crop rectangle. The location of + the compose rectangle specifies the location of the actual + sink compose rectangle in the sink compose bounds + rectangle.</listitem> + + <listitem>Source pad actual crop selection. Crop on the source + pad defines crop performed to the image in the sink compose + bounds rectangle.</listitem> + + <listitem>Source pad format. The source pad format defines the + output pixel format of the subdev, as well as the other + parameters with the exception of the image width and height. + Width and height are defined by the size of the source pad + actual crop selection.</listitem> + </orderedlist> + + <para>Accessing any of the above rectangles not supported by the + subdev will return <constant>EINVAL</constant>. Any rectangle + referring to a previous unsupported rectangle coordinates will + instead refer to the previous supported rectangle. For example, + if sink crop is not supported, the compose selection will refer + to the sink pad format dimensions instead.</para> + + <figure id="subdev-image-processing-crop"> + <title>Image processing in subdevs: simple crop example</title> + <mediaobject> + <imageobject> + <imagedata fileref="subdev-image-processing-crop.svg" + format="SVG" scale="200" /> + </imageobject> + </mediaobject> + </figure> + + <para>In the above example, the subdev supports cropping on its + sink pad. To configure it, the user sets the media bus format on + the subdev's sink pad. Now the actual crop rectangle can be set + on the sink pad --- the location and size of this rectangle + reflect the location and size of a rectangle to be cropped from + the sink format. The size of the sink crop rectangle will also + be the size of the format of the subdev's source pad.</para> + + <figure id="subdev-image-processing-scaling-multi-source"> + <title>Image processing in subdevs: scaling with multiple sources</title> + <mediaobject> + <imageobject> + <imagedata fileref="subdev-image-processing-scaling-multi-source.svg" + format="SVG" scale="200" /> + </imageobject> + </mediaobject> + </figure> + + <para>In this example, the subdev is capable of first cropping, + then scaling and finally cropping for two source pads + individually from the resulting scaled image. The location of + the scaled image in the cropped image is ignored in sink compose + target. Both of the locations of the source crop rectangles + refer to the sink scaling rectangle, independently cropping an + area at location specified by the source crop rectangle from + it.</para> + + <figure id="subdev-image-processing-full"> + <title>Image processing in subdevs: scaling and composition + with multiple sinks and sources</title> + <mediaobject> + <imageobject> + <imagedata fileref="subdev-image-processing-full.svg" + format="SVG" scale="200" /> + </imageobject> + </mediaobject> + </figure> + + <para>The subdev driver supports two sink pads and two source + pads. The images from both of the sink pads are individually + cropped, then scaled and further composed on the composition + bounds rectangle. From that, two independent streams are cropped + and sent out of the subdev from the source pads.</para> </section> + </section> &sub-subdev-formats; diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml index b815929b5bba..fd6aca2922b6 100644 --- a/Documentation/DocBook/media/v4l/io.xml +++ b/Documentation/DocBook/media/v4l/io.xml @@ -543,12 +543,13 @@ and can range from zero to the number of buffers allocated with the &VIDIOC-REQBUFS; ioctl (&v4l2-requestbuffers; <structfield>count</structfield>) minus one.</entry> </row> <row> - <entry>&v4l2-buf-type;</entry> + <entry>__u32</entry> <entry><structfield>type</structfield></entry> <entry></entry> <entry>Type of the buffer, same as &v4l2-format; <structfield>type</structfield> or &v4l2-requestbuffers; -<structfield>type</structfield>, set by the application.</entry> +<structfield>type</structfield>, set by the application. See <xref +linkend="v4l2-buf-type" /></entry> </row> <row> <entry>__u32</entry> @@ -568,7 +569,7 @@ refers to an input stream, applications when an output stream.</entry> linkend="buffer-flags" />.</entry> </row> <row> - <entry>&v4l2-field;</entry> + <entry>__u32</entry> <entry><structfield>field</structfield></entry> <entry></entry> <entry>Indicates the field order of the image in the @@ -630,11 +631,12 @@ bandwidth. These devices identify by not enumerating any video standards, see <xref linkend="standard" />.</para></entry> </row> <row> - <entry>&v4l2-memory;</entry> + <entry>__u32</entry> <entry><structfield>memory</structfield></entry> <entry></entry> <entry>This field must be set by applications and/or drivers -in accordance with the selected I/O method.</entry> +in accordance with the selected I/O method. See <xref linkend="v4l2-memory" + /></entry> </row> <row> <entry>union</entry> diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml index 7b274092e60c..c1c62a9acc2a 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml @@ -1,4 +1,4 @@ - <refentry> + <refentry id="pixfmt-srggb10"> <refmeta> <refentrytitle>V4L2_PIX_FMT_SRGGB10 ('RG10'), V4L2_PIX_FMT_SGRBG10 ('BA10'), diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml new file mode 100644 index 000000000000..8eace3e2e7d4 --- /dev/null +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml @@ -0,0 +1,29 @@ + <refentry id="pixfmt-srggb10dpcm8"> + <refmeta> + <refentrytitle> + V4L2_PIX_FMT_SBGGR10DPCM8 ('bBA8'), + V4L2_PIX_FMT_SGBRG10DPCM8 ('bGA8'), + V4L2_PIX_FMT_SGRBG10DPCM8 ('BD10'), + V4L2_PIX_FMT_SRGGB10DPCM8 ('bRA8'), + </refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname id="V4L2-PIX-FMT-SBGGR10DPCM8"><constant>V4L2_PIX_FMT_SBGGR10DPCM8</constant></refname> + <refname id="V4L2-PIX-FMT-SGBRG10DPCM8"><constant>V4L2_PIX_FMT_SGBRG10DPCM8</constant></refname> + <refname id="V4L2-PIX-FMT-SGRBG10DPCM8"><constant>V4L2_PIX_FMT_SGRBG10DPCM8</constant></refname> + <refname id="V4L2-PIX-FMT-SRGGB10DPCM8"><constant>V4L2_PIX_FMT_SRGGB10DPCM8</constant></refname> + <refpurpose>10-bit Bayer formats compressed to 8 bits</refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>The following four pixel formats are raw sRGB / Bayer formats + with 10 bits per colour compressed to 8 bits each, using DPCM + compression. DPCM, differential pulse-code modulation, is lossy. + Each colour component consumes 8 bits of memory. In other respects + this format is similar to <xref + linkend="pixfmt-srggb10">.</xref></para> + + </refsect1> + </refentry> diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml index 31eaae2469f9..f5ac15ed0549 100644 --- a/Documentation/DocBook/media/v4l/pixfmt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt.xml @@ -673,6 +673,7 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.< &sub-srggb8; &sub-sbggr16; &sub-srggb10; + &sub-srggb10dpcm8; &sub-srggb12; </section> @@ -876,11 +877,6 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm <entry>'S561'</entry> <entry>Compressed GBRG Bayer format used by the gspca driver.</entry> </row> - <row id="V4L2-PIX-FMT-SGRBG10DPCM8"> - <entry><constant>V4L2_PIX_FMT_SGRBG10DPCM8</constant></entry> - <entry>'DB10'</entry> - <entry>10 bit raw Bayer DPCM compressed to 8 bits.</entry> - </row> <row id="V4L2-PIX-FMT-PAC207"> <entry><constant>V4L2_PIX_FMT_PAC207</constant></entry> <entry>'P207'</entry> diff --git a/Documentation/DocBook/media/v4l/subdev-image-processing-crop.dia b/Documentation/DocBook/media/v4l/subdev-image-processing-crop.dia new file mode 100644 index 000000000000..e32ba5362e1d --- /dev/null +++ b/Documentation/DocBook/media/v4l/subdev-image-processing-crop.dia @@ -0,0 +1,614 @@ +<?xml version="1.0" encoding="UTF-8"?> +<dia:diagram xmlns:dia="http://www.lysator.liu.se/~alla/dia/"> + <dia:diagramdata> + <dia:attribute name="background"> + <dia:color val="#ffffff"/> + </dia:attribute> + <dia:attribute name="pagebreak"> + <dia:color val="#000099"/> + </dia:attribute> + <dia:attribute name="paper"> + <dia:composite type="paper"> + <dia:attribute name="name"> + <dia:string>#A4#</dia:string> + </dia:attribute> + <dia:attribute name="tmargin"> + <dia:real val="2.8222000598907471"/> + </dia:attribute> + <dia:attribute name="bmargin"> + <dia:real val="2.8222000598907471"/> + </dia:attribute> + <dia:attribute name="lmargin"> + <dia:real val="2.8222000598907471"/> + </dia:attribute> + <dia:attribute name="rmargin"> + <dia:real val="2.8222000598907471"/> + </dia:attribute> + <dia:attribute name="is_portrait"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="scaling"> + <dia:real val="0.49000000953674316"/> + </dia:attribute> + <dia:attribute name="fitto"> + <dia:boolean val="false"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="grid"> + <dia:composite type="grid"> + <dia:attribute name="width_x"> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="width_y"> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="visible_x"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="visible_y"> + <dia:int val="1"/> + </dia:attribute> + <dia:composite type="color"/> + </dia:composite> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#d8e5e5"/> + </dia:attribute> + <dia:attribute name="guides"> + <dia:composite type="guides"> + <dia:attribute name="hguides"/> + <dia:attribute name="vguides"/> + </dia:composite> + </dia:attribute> + </dia:diagramdata> + <dia:layer name="Background" visible="true" active="true"> + <dia:object type="Standard - Box" version="0" id="O0"> + <dia:attribute name="obj_pos"> + <dia:point val="-0.4,6.5"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-0.45,6.45;23.1387,16.2"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="-0.4,6.5"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="23.48871579904775"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="9.6500000000000004"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="false"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O1"> + <dia:attribute name="obj_pos"> + <dia:point val="0.225,9.45"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="0.175,9.4;8.225,14.7"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="0.225,9.45"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="7.9499999999999975"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="5.1999999999999975"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#a52a2a"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O2"> + <dia:attribute name="obj_pos"> + <dia:point val="3.175,10.55"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="3.125,10.5;7.925,14.45"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="3.175,10.55"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="4.6999999999999975"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="3.8499999999999979"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#0000ff"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O3"> + <dia:attribute name="obj_pos"> + <dia:point val="3.725,11.3875"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="3.725,10.7925;6.6025,13.14"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#sink +crop +selection#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="3.725,11.3875"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#0000ff"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O4"> + <dia:attribute name="obj_pos"> + <dia:point val="1.475,7.9"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="1.475,7.305;1.475,8.0525"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>##</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="1.475,7.9"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O5"> + <dia:attribute name="obj_pos"> + <dia:point val="0.426918,7.89569"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="0.426918,7.30069;3.90942,8.84819"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#sink media +bus format#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="0.426918,7.89569"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#a52a2a"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O6"> + <dia:attribute name="obj_pos"> + <dia:point val="17.4887,7.75"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="17.4887,7.155;21.8112,8.7025"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#source media +bus format#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="17.4887,7.75"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#8b6914"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O7"> + <dia:attribute name="obj_pos"> + <dia:point val="17.5244,9.5417"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="17.4744,9.4917;22.2387,13.35"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="17.5244,9.5417"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="4.6643157990477508"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="3.758300000000002"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#8b6914"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O8"> + <dia:attribute name="obj_pos"> + <dia:point val="17.5244,13.3"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="3.12132,13.2463;17.5781,14.4537"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="17.5244,13.3"/> + <dia:point val="3.175,14.4"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O7" connection="5"/> + <dia:connection handle="1" to="O2" connection="5"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O9"> + <dia:attribute name="obj_pos"> + <dia:point val="17.5244,9.5417"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="3.12162,9.48832;17.5778,10.6034"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="17.5244,9.5417"/> + <dia:point val="3.175,10.55"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O7" connection="0"/> + <dia:connection handle="1" to="O2" connection="0"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O10"> + <dia:attribute name="obj_pos"> + <dia:point val="22.1887,13.3"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="7.82132,13.2463;22.2424,14.4537"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="22.1887,13.3"/> + <dia:point val="7.875,14.4"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O7" connection="7"/> + <dia:connection handle="1" to="O2" connection="7"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O11"> + <dia:attribute name="obj_pos"> + <dia:point val="22.1887,9.5417"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="7.82161,9.48831;22.2421,10.6034"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="22.1887,9.5417"/> + <dia:point val="7.875,10.55"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O7" connection="2"/> + <dia:connection handle="1" to="O2" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Geometric - Perfect Circle" version="1" id="O12"> + <dia:attribute name="obj_pos"> + <dia:point val="23.23,10.5742"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="23.18,10.5242;24.13,11.4742"/> + </dia:attribute> + <dia:attribute name="meta"> + <dia:composite type="dict"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="23.23,10.5742"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="line_width"> + <dia:real val="0.10000000000000001"/> + </dia:attribute> + <dia:attribute name="line_colour"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="fill_colour"> + <dia:color val="#ffffff"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="0"/> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="flip_horizontal"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="flip_vertical"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="subscale"> + <dia:real val="1"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O13"> + <dia:attribute name="obj_pos"> + <dia:point val="24.08,10.9992"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="24.03,10.6388;32.4953,11.3624"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="24.08,10.9992"/> + <dia:point val="32.3835,11.0007"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O12" connection="3"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O14"> + <dia:attribute name="obj_pos"> + <dia:point val="25.3454,10.49"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="25.3454,9.895;29.9904,10.6425"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#pad 1 (source)#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="25.3454,10.49"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Geometric - Perfect Circle" version="1" id="O15"> + <dia:attribute name="obj_pos"> + <dia:point val="-1.44491,11.6506"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-1.49491,11.6006;-0.54491,12.5506"/> + </dia:attribute> + <dia:attribute name="meta"> + <dia:composite type="dict"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="-1.44491,11.6506"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="line_width"> + <dia:real val="0.10000000000000001"/> + </dia:attribute> + <dia:attribute name="line_colour"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="fill_colour"> + <dia:color val="#ffffff"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="0"/> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="flip_horizontal"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="flip_vertical"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="subscale"> + <dia:real val="1"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O16"> + <dia:attribute name="obj_pos"> + <dia:point val="-9.61991,12.09"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-9.67,11.7149;-1.33311,12.4385"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="-9.61991,12.09"/> + <dia:point val="-1.44491,12.0756"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="1" to="O15" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O17"> + <dia:attribute name="obj_pos"> + <dia:point val="-7.39291,11.49"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-7.39291,10.895;-3.58791,11.6425"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#pad 0 (sink)#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="-7.39291,11.49"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + </dia:layer> +</dia:diagram> diff --git a/Documentation/DocBook/media/v4l/subdev-image-processing-crop.svg b/Documentation/DocBook/media/v4l/subdev-image-processing-crop.svg new file mode 100644 index 000000000000..18b0f5de9ed2 --- /dev/null +++ b/Documentation/DocBook/media/v4l/subdev-image-processing-crop.svg @@ -0,0 +1,63 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/PR-SVG-20010719/DTD/svg10.dtd"> +<svg width="43cm" height="10cm" viewBox="-194 128 844 196" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink"> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x="-8" y="130" width="469.774" height="193"/> + <g> + <rect style="fill: #ffffff" x="4.5" y="189" width="159" height="104"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a52a2a" x="4.5" y="189" width="159" height="104"/> + </g> + <g> + <rect style="fill: #ffffff" x="63.5" y="211" width="94" height="77"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" x="63.5" y="211" width="94" height="77"/> + </g> + <text style="fill: #0000ff;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="74.5" y="227.75"> + <tspan x="74.5" y="227.75">sink</tspan> + <tspan x="74.5" y="243.75">crop</tspan> + <tspan x="74.5" y="259.75">selection</tspan> + </text> + <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="29.5" y="158"> + <tspan x="29.5" y="158"></tspan> + </text> + <text style="fill: #a52a2a;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="8.53836" y="157.914"> + <tspan x="8.53836" y="157.914">sink media</tspan> + <tspan x="8.53836" y="173.914">bus format</tspan> + </text> + <text style="fill: #8b6914;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="349.774" y="155"> + <tspan x="349.774" y="155">source media</tspan> + <tspan x="349.774" y="171">bus format</tspan> + </text> + <g> + <rect style="fill: #ffffff" x="350.488" y="190.834" width="93.2863" height="75.166"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #8b6914" x="350.488" y="190.834" width="93.2863" height="75.166"/> + </g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="350.488" y1="266" x2="63.5" y2="288"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="350.488" y1="190.834" x2="63.5" y2="211"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="443.774" y1="266" x2="157.5" y2="288"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="443.774" y1="190.834" x2="157.5" y2="211"/> + <g> + <ellipse style="fill: #ffffff" cx="473.1" cy="219.984" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="473.1" cy="219.984" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="473.1" cy="219.984" rx="8.5" ry="8.5"/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="481.6" y1="219.984" x2="637.934" y2="220.012"/> + <polygon style="fill: #000000" points="645.434,220.014 635.433,225.012 637.934,220.012 635.435,215.012 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="645.434,220.014 635.433,225.012 637.934,220.012 635.435,215.012 "/> + </g> + <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="506.908" y="209.8"> + <tspan x="506.908" y="209.8">pad 1 (source)</tspan> + </text> + <g> + <ellipse style="fill: #ffffff" cx="-20.3982" cy="241.512" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-20.3982" cy="241.512" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-20.3982" cy="241.512" rx="8.5" ry="8.5"/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="-192.398" y1="241.8" x2="-38.6343" y2="241.529"/> + <polygon style="fill: #000000" points="-31.1343,241.516 -41.1254,246.534 -38.6343,241.529 -41.1431,236.534 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="-31.1343,241.516 -41.1254,246.534 -38.6343,241.529 -41.1431,236.534 "/> + </g> + <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="-147.858" y="229.8"> + <tspan x="-147.858" y="229.8">pad 0 (sink)</tspan> + </text> +</svg> diff --git a/Documentation/DocBook/media/v4l/subdev-image-processing-full.dia b/Documentation/DocBook/media/v4l/subdev-image-processing-full.dia new file mode 100644 index 000000000000..a0d782927840 --- /dev/null +++ b/Documentation/DocBook/media/v4l/subdev-image-processing-full.dia @@ -0,0 +1,1588 @@ +<?xml version="1.0" encoding="UTF-8"?> +<dia:diagram xmlns:dia="http://www.lysator.liu.se/~alla/dia/"> + <dia:diagramdata> + <dia:attribute name="background"> + <dia:color val="#ffffff"/> + </dia:attribute> + <dia:attribute name="pagebreak"> + <dia:color val="#000099"/> + </dia:attribute> + <dia:attribute name="paper"> + <dia:composite type="paper"> + <dia:attribute name="name"> + <dia:string>#A4#</dia:string> + </dia:attribute> + <dia:attribute name="tmargin"> + <dia:real val="2.8222000598907471"/> + </dia:attribute> + <dia:attribute name="bmargin"> + <dia:real val="2.8222000598907471"/> + </dia:attribute> + <dia:attribute name="lmargin"> + <dia:real val="2.8222000598907471"/> + </dia:attribute> + <dia:attribute name="rmargin"> + <dia:real val="2.8222000598907471"/> + </dia:attribute> + <dia:attribute name="is_portrait"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="scaling"> + <dia:real val="0.49000000953674316"/> + </dia:attribute> + <dia:attribute name="fitto"> + <dia:boolean val="false"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="grid"> + <dia:composite type="grid"> + <dia:attribute name="width_x"> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="width_y"> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="visible_x"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="visible_y"> + <dia:int val="1"/> + </dia:attribute> + <dia:composite type="color"/> + </dia:composite> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#d8e5e5"/> + </dia:attribute> + <dia:attribute name="guides"> + <dia:composite type="guides"> + <dia:attribute name="hguides"/> + <dia:attribute name="vguides"/> + </dia:composite> + </dia:attribute> + </dia:diagramdata> + <dia:layer name="Background" visible="true" active="true"> + <dia:object type="Standard - Box" version="0" id="O0"> + <dia:attribute name="obj_pos"> + <dia:point val="15.945,6.45"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="15.895,6.4;26.4,18.95"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="15.945,6.45"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="10.404999999254942"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="12.449999999999992"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#ff765a"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O1"> + <dia:attribute name="obj_pos"> + <dia:point val="-0.1,3.65"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-0.15,3.6;40.25,20.85"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="-0.1,3.65"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="40.300000000000004"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="17.149999999999999"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="false"/> + </dia:attribute> + </dia:object> + <dia:object type="Geometric - Perfect Circle" version="1" id="O2"> + <dia:attribute name="obj_pos"> + <dia:point val="-1.05,7.9106"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-1.1,7.8606;-0.15,8.8106"/> + </dia:attribute> + <dia:attribute name="meta"> + <dia:composite type="dict"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="-1.05,7.9106"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="line_width"> + <dia:real val="0.10000000000000001"/> + </dia:attribute> + <dia:attribute name="line_colour"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="fill_colour"> + <dia:color val="#ffffff"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="0"/> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="flip_horizontal"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="flip_vertical"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="subscale"> + <dia:real val="1"/> + </dia:attribute> + </dia:object> + <dia:object type="Geometric - Perfect Circle" version="1" id="O3"> + <dia:attribute name="obj_pos"> + <dia:point val="40.3366,9.8342"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="40.2866,9.7842;41.2366,10.7342"/> + </dia:attribute> + <dia:attribute name="meta"> + <dia:composite type="dict"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="40.3366,9.8342"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="line_width"> + <dia:real val="0.10000000000000001"/> + </dia:attribute> + <dia:attribute name="line_colour"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="fill_colour"> + <dia:color val="#ffffff"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="0"/> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="flip_horizontal"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="flip_vertical"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="subscale"> + <dia:real val="1"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O4"> + <dia:attribute name="obj_pos"> + <dia:point val="-9.225,8.35"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-9.27509,7.97487;-0.938197,8.69848"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="-9.225,8.35"/> + <dia:point val="-1.05,8.3356"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="1" to="O2" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O5"> + <dia:attribute name="obj_pos"> + <dia:point val="41.1866,10.2592"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="41.1366,9.89879;49.6019,10.6224"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="41.1866,10.2592"/> + <dia:point val="49.4901,10.2607"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O3" connection="3"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O6"> + <dia:attribute name="obj_pos"> + <dia:point val="-6.998,7.75"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-6.998,7.155;-3.193,7.9025"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#pad 0 (sink)#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="-6.998,7.75"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O7"> + <dia:attribute name="obj_pos"> + <dia:point val="42.452,9.75"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="42.452,9.155;47.097,9.9025"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#pad 2 (source)#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="42.452,9.75"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O8"> + <dia:attribute name="obj_pos"> + <dia:point val="0.275,6"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="0.225,5.95;8.275,11.25"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="0.275,6"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="7.9499999999999975"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="5.1999999999999975"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#a52a2a"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O9"> + <dia:attribute name="obj_pos"> + <dia:point val="3.125,6.8"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="3.075,6.75;7.875,10.7"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="3.125,6.8"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="4.6999999999999975"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="3.8499999999999979"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#0000ff"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O10"> + <dia:attribute name="obj_pos"> + <dia:point val="1.525,4.45"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="1.525,3.855;1.525,4.6025"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>##</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="1.525,4.45"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O11"> + <dia:attribute name="obj_pos"> + <dia:point val="0.476918,4.44569"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="0.476918,3.85069;3.95942,5.39819"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#sink media +bus format#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="0.476918,4.44569"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#a52a2a"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O12"> + <dia:attribute name="obj_pos"> + <dia:point val="16.6822,9.28251"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="16.6322,9.23251;24.9922,17.9564"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="16.6822,9.28251"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="8.2600228398861297"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="8.6238900617957164"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#00ff00"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O13"> + <dia:attribute name="obj_pos"> + <dia:point val="16.6822,17.9064"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="3.05732,10.5823;16.7499,17.9741"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="16.6822,17.9064"/> + <dia:point val="3.125,10.65"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O12" connection="5"/> + <dia:connection handle="1" to="O9" connection="5"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O14"> + <dia:attribute name="obj_pos"> + <dia:point val="16.6822,9.28251"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="3.06681,6.74181;16.7404,9.3407"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="16.6822,9.28251"/> + <dia:point val="3.125,6.8"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O12" connection="0"/> + <dia:connection handle="1" to="O9" connection="0"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O15"> + <dia:attribute name="obj_pos"> + <dia:point val="24.9422,17.9064"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="7.75945,10.5845;25.0077,17.9719"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="24.9422,17.9064"/> + <dia:point val="7.825,10.65"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O12" connection="7"/> + <dia:connection handle="1" to="O9" connection="7"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O16"> + <dia:attribute name="obj_pos"> + <dia:point val="24.9422,9.28251"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="7.76834,6.74334;24.9989,9.33917"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="24.9422,9.28251"/> + <dia:point val="7.825,6.8"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O12" connection="2"/> + <dia:connection handle="1" to="O9" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O17"> + <dia:attribute name="obj_pos"> + <dia:point val="16.7352,7.47209"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="16.7352,6.87709;22.5602,8.42459"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#sink compose +selection (scaling)#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="16.7352,7.47209"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#00ff00"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O18"> + <dia:attribute name="obj_pos"> + <dia:point val="20.4661,9.72825"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="20.4161,9.67825;25.5254,13.3509"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="20.4661,9.72825"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="5.009308462554376"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="3.5726155970598077"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#a020f0"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O19"> + <dia:attribute name="obj_pos"> + <dia:point val="34.475,5.2564"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="34.475,4.6614;38.7975,6.2089"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#source media +bus format#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="34.475,5.2564"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#8b6914"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O20"> + <dia:attribute name="obj_pos"> + <dia:point val="34.4244,8.6917"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="34.3744,8.6417;39.4837,12.3143"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="34.4244,8.6917"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="5.009308462554376"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="3.5726155970598077"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#8b6914"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O21"> + <dia:attribute name="obj_pos"> + <dia:point val="34.4244,12.2643"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="20.4125,12.2107;34.478,13.3545"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="34.4244,12.2643"/> + <dia:point val="20.4661,13.3009"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O20" connection="5"/> + <dia:connection handle="1" to="O18" connection="5"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O22"> + <dia:attribute name="obj_pos"> + <dia:point val="34.4244,8.6917"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="20.4125,8.63813;34.478,9.78182"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="34.4244,8.6917"/> + <dia:point val="20.4661,9.72825"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O20" connection="0"/> + <dia:connection handle="1" to="O18" connection="0"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O23"> + <dia:attribute name="obj_pos"> + <dia:point val="39.4337,12.2643"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="25.4218,12.2107;39.4873,13.3545"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="39.4337,12.2643"/> + <dia:point val="25.4754,13.3009"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O20" connection="7"/> + <dia:connection handle="1" to="O18" connection="7"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O24"> + <dia:attribute name="obj_pos"> + <dia:point val="39.4337,8.6917"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="25.4218,8.63813;39.4873,9.78182"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="39.4337,8.6917"/> + <dia:point val="25.4754,9.72825"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O20" connection="2"/> + <dia:connection handle="1" to="O18" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O25"> + <dia:attribute name="obj_pos"> + <dia:point val="16.25,5.15"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="16.25,4.555;21.68,6.1025"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#sink compose +bounds selection#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="16.25,5.15"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#ff765a"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Geometric - Perfect Circle" version="1" id="O26"> + <dia:attribute name="obj_pos"> + <dia:point val="-1.02991,16.6506"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-1.07991,16.6006;-0.12991,17.5506"/> + </dia:attribute> + <dia:attribute name="meta"> + <dia:composite type="dict"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="-1.02991,16.6506"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="line_width"> + <dia:real val="0.10000000000000001"/> + </dia:attribute> + <dia:attribute name="line_colour"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="fill_colour"> + <dia:color val="#ffffff"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="0"/> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="flip_horizontal"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="flip_vertical"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="subscale"> + <dia:real val="1"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O27"> + <dia:attribute name="obj_pos"> + <dia:point val="-9.20491,17.09"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-9.255,16.7149;-0.918107,17.4385"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="-9.20491,17.09"/> + <dia:point val="-1.02991,17.0756"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="1" to="O26" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O28"> + <dia:attribute name="obj_pos"> + <dia:point val="-6.95,16.45"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-6.95,15.855;-3.145,16.6025"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#pad 1 (sink)#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="-6.95,16.45"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O29"> + <dia:attribute name="obj_pos"> + <dia:point val="0.390412,14.64"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="0.340412,14.59;6.045,18.8"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="0.390412,14.64"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="5.604587512785236"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="4.1099999999999994"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#a52a2a"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O30"> + <dia:attribute name="obj_pos"> + <dia:point val="2.645,15.74"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="2.595,15.69;5.6,18.3"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="2.645,15.74"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="2.904999999254942"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="2.5100000000000016"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#0000ff"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O31"> + <dia:attribute name="obj_pos"> + <dia:point val="1.595,12.99"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="1.595,12.395;1.595,13.1425"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>##</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="1.595,12.99"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O32"> + <dia:attribute name="obj_pos"> + <dia:point val="17.945,12.595"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="2.58596,12.536;18.004,15.799"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="17.945,12.595"/> + <dia:point val="2.645,15.74"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O36" connection="0"/> + <dia:connection handle="1" to="O30" connection="0"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O33"> + <dia:attribute name="obj_pos"> + <dia:point val="17.945,15.8"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="2.58772,15.7427;18.0023,18.3073"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="17.945,15.8"/> + <dia:point val="2.645,18.25"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O36" connection="5"/> + <dia:connection handle="1" to="O30" connection="5"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O34"> + <dia:attribute name="obj_pos"> + <dia:point val="21.7,15.8"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="5.49307,15.7431;21.7569,18.3069"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="21.7,15.8"/> + <dia:point val="5.55,18.25"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O36" connection="7"/> + <dia:connection handle="1" to="O30" connection="7"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O35"> + <dia:attribute name="obj_pos"> + <dia:point val="21.7,12.595"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="5.49136,12.5364;21.7586,15.7986"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="21.7,12.595"/> + <dia:point val="5.55,15.74"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O36" connection="2"/> + <dia:connection handle="1" to="O30" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O36"> + <dia:attribute name="obj_pos"> + <dia:point val="17.945,12.595"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="17.895,12.545;21.75,15.85"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="17.945,12.595"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="3.7549999992549452"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="3.2049999992549427"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#00ff00"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="false"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O37"> + <dia:attribute name="obj_pos"> + <dia:point val="22.1631,14.2233"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="22.1131,14.1733;25.45,16.7"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="22.1631,14.2233"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="3.2369000000000021"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="2.4267000000000003"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#a020f0"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="false"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O38"> + <dia:attribute name="obj_pos"> + <dia:point val="34.6714,16.2367"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="34.6214,16.1867;37.9,18.75"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="34.6714,16.2367"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="3.178600000000003"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="2.4632999999999967"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#8b6914"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O39"> + <dia:attribute name="obj_pos"> + <dia:point val="34.6714,18.7"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="22.1057,16.5926;34.7288,18.7574"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="34.6714,18.7"/> + <dia:point val="22.1631,16.65"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O38" connection="5"/> + <dia:connection handle="1" to="O37" connection="5"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O40"> + <dia:attribute name="obj_pos"> + <dia:point val="34.6714,16.2367"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="22.1058,14.166;34.7287,16.294"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="34.6714,16.2367"/> + <dia:point val="22.1631,14.2233"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O38" connection="0"/> + <dia:connection handle="1" to="O37" connection="0"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O41"> + <dia:attribute name="obj_pos"> + <dia:point val="37.85,18.7"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="25.3425,16.5925;37.9075,18.7575"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="37.85,18.7"/> + <dia:point val="25.4,16.65"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O38" connection="7"/> + <dia:connection handle="1" to="O37" connection="7"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O42"> + <dia:attribute name="obj_pos"> + <dia:point val="37.85,16.2367"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="25.3427,14.166;37.9073,16.294"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="37.85,16.2367"/> + <dia:point val="25.4,14.2233"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O38" connection="2"/> + <dia:connection handle="1" to="O37" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Geometric - Perfect Circle" version="1" id="O43"> + <dia:attribute name="obj_pos"> + <dia:point val="40.347,16.7742"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="40.297,16.7242;41.247,17.6742"/> + </dia:attribute> + <dia:attribute name="meta"> + <dia:composite type="dict"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="40.347,16.7742"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="line_width"> + <dia:real val="0.10000000000000001"/> + </dia:attribute> + <dia:attribute name="line_colour"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="fill_colour"> + <dia:color val="#ffffff"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="0"/> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="flip_horizontal"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="flip_vertical"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="subscale"> + <dia:real val="1"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O44"> + <dia:attribute name="obj_pos"> + <dia:point val="41.197,17.1992"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="41.147,16.8388;49.6123,17.5624"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="41.197,17.1992"/> + <dia:point val="49.5005,17.2007"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O43" connection="3"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O45"> + <dia:attribute name="obj_pos"> + <dia:point val="42.4624,16.69"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="42.4624,16.095;47.1074,16.8425"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#pad 3 (source)#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="42.4624,16.69"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O46"> + <dia:attribute name="obj_pos"> + <dia:point val="9.85,4.55"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="9.85,3.955;12.7275,6.3025"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#sink +crop +selection#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="9.85,4.55"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#0000ff"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O47"> + <dia:attribute name="obj_pos"> + <dia:point val="27.65,4.75"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="27.65,4.155;30.5275,6.5025"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#source +crop +selection#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="27.65,4.75"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#a020f0"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O48"> + <dia:attribute name="obj_pos"> + <dia:point val="10.55,6.6"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="7.7135,6.39438;10.6035,7.11605"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="10.55,6.6"/> + <dia:point val="7.825,6.8"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#0000ff"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="1" to="O9" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O49"> + <dia:attribute name="obj_pos"> + <dia:point val="10.45,6.55"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="5.48029,6.48236;10.5176,15.8387"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="10.45,6.55"/> + <dia:point val="5.55,15.74"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#0000ff"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="1" to="O30" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O50"> + <dia:attribute name="obj_pos"> + <dia:point val="27.5246,6.66071"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="25.406,6.59136;27.594,9.82122"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="27.5246,6.66071"/> + <dia:point val="25.4754,9.72825"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#a020f0"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="1" to="O18" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O51"> + <dia:attribute name="obj_pos"> + <dia:point val="27.5036,6.68935"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="25.2161,6.62775;27.5652,14.331"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="27.5036,6.68935"/> + <dia:point val="25.4,14.2233"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#a020f0"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="1" to="O37" connection="2"/> + </dia:connections> + </dia:object> + </dia:layer> +</dia:diagram> diff --git a/Documentation/DocBook/media/v4l/subdev-image-processing-full.svg b/Documentation/DocBook/media/v4l/subdev-image-processing-full.svg new file mode 100644 index 000000000000..3322cf4c0093 --- /dev/null +++ b/Documentation/DocBook/media/v4l/subdev-image-processing-full.svg @@ -0,0 +1,163 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/PR-SVG-20010719/DTD/svg10.dtd"> +<svg width="59cm" height="18cm" viewBox="-186 71 1178 346" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink"> + <g> + <rect style="fill: #ffffff" x="318.9" y="129" width="208.1" height="249"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #ff765a" x="318.9" y="129" width="208.1" height="249"/> + </g> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x="-2" y="73" width="806" height="343"/> + <g> + <ellipse style="fill: #ffffff" cx="-12.5" cy="166.712" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-12.5" cy="166.712" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-12.5" cy="166.712" rx="8.5" ry="8.5"/> + </g> + <g> + <ellipse style="fill: #ffffff" cx="815.232" cy="205.184" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="815.232" cy="205.184" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="815.232" cy="205.184" rx="8.5" ry="8.5"/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="-184.5" y1="167" x2="-30.7361" y2="166.729"/> + <polygon style="fill: #000000" points="-23.2361,166.716 -33.2272,171.734 -30.7361,166.729 -33.2449,161.734 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="-23.2361,166.716 -33.2272,171.734 -30.7361,166.729 -33.2449,161.734 "/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="823.732" y1="205.184" x2="980.066" y2="205.212"/> + <polygon style="fill: #000000" points="987.566,205.214 977.565,210.212 980.066,205.212 977.567,200.212 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="987.566,205.214 977.565,210.212 980.066,205.212 977.567,200.212 "/> + </g> + <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="-139.96" y="155"> + <tspan x="-139.96" y="155">pad 0 (sink)</tspan> + </text> + <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="849.04" y="195"> + <tspan x="849.04" y="195">pad 2 (source)</tspan> + </text> + <g> + <rect style="fill: #ffffff" x="5.5" y="120" width="159" height="104"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a52a2a" x="5.5" y="120" width="159" height="104"/> + </g> + <g> + <rect style="fill: #ffffff" x="62.5" y="136" width="94" height="77"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" x="62.5" y="136" width="94" height="77"/> + </g> + <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="30.5" y="89"> + <tspan x="30.5" y="89"></tspan> + </text> + <text style="fill: #a52a2a;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="9.53836" y="88.9138"> + <tspan x="9.53836" y="88.9138">sink media</tspan> + <tspan x="9.53836" y="104.914">bus format</tspan> + </text> + <g> + <rect style="fill: #ffffff" x="333.644" y="185.65" width="165.2" height="172.478"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #00ff00" x="333.644" y="185.65" width="165.2" height="172.478"/> + </g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="333.644" y1="358.128" x2="62.5" y2="213"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="333.644" y1="185.65" x2="62.5" y2="136"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="498.844" y1="358.128" x2="156.5" y2="213"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="498.844" y1="185.65" x2="156.5" y2="136"/> + <text style="fill: #00ff00;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="334.704" y="149.442"> + <tspan x="334.704" y="149.442">sink compose</tspan> + <tspan x="334.704" y="165.442">selection (scaling)</tspan> + </text> + <g> + <rect style="fill: #ffffff" x="409.322" y="194.565" width="100.186" height="71.4523"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x="409.322" y="194.565" width="100.186" height="71.4523"/> + </g> + <text style="fill: #8b6914;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="689.5" y="105.128"> + <tspan x="689.5" y="105.128">source media</tspan> + <tspan x="689.5" y="121.128">bus format</tspan> + </text> + <g> + <rect style="fill: #ffffff" x="688.488" y="173.834" width="100.186" height="71.4523"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #8b6914" x="688.488" y="173.834" width="100.186" height="71.4523"/> + </g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="688.488" y1="245.286" x2="409.322" y2="266.018"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="688.488" y1="173.834" x2="409.322" y2="194.565"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="788.674" y1="245.286" x2="509.508" y2="266.018"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="788.674" y1="173.834" x2="509.508" y2="194.565"/> + <text style="fill: #ff765a;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="325" y="103"> + <tspan x="325" y="103">sink compose</tspan> + <tspan x="325" y="119">bounds selection</tspan> + </text> + <g> + <ellipse style="fill: #ffffff" cx="-12.0982" cy="341.512" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-12.0982" cy="341.512" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-12.0982" cy="341.512" rx="8.5" ry="8.5"/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="-184.098" y1="341.8" x2="-30.3343" y2="341.529"/> + <polygon style="fill: #000000" points="-22.8343,341.516 -32.8254,346.534 -30.3343,341.529 -32.8431,336.534 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="-22.8343,341.516 -32.8254,346.534 -30.3343,341.529 -32.8431,336.534 "/> + </g> + <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="-139" y="329"> + <tspan x="-139" y="329">pad 1 (sink)</tspan> + </text> + <g> + <rect style="fill: #ffffff" x="7.80824" y="292.8" width="112.092" height="82.2"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a52a2a" x="7.80824" y="292.8" width="112.092" height="82.2"/> + </g> + <g> + <rect style="fill: #ffffff" x="52.9" y="314.8" width="58.1" height="50.2"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" x="52.9" y="314.8" width="58.1" height="50.2"/> + </g> + <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="31.9" y="259.8"> + <tspan x="31.9" y="259.8"></tspan> + </text> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="358.9" y1="251.9" x2="52.9" y2="314.8"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="358.9" y1="316" x2="52.9" y2="365"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="434" y1="316" x2="111" y2="365"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="434" y1="251.9" x2="111" y2="314.8"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #00ff00" x="358.9" y="251.9" width="75.1" height="64.1"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x="443.262" y="284.466" width="64.738" height="48.534"/> + <g> + <rect style="fill: #ffffff" x="693.428" y="324.734" width="63.572" height="49.266"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #8b6914" x="693.428" y="324.734" width="63.572" height="49.266"/> + </g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="693.428" y1="374" x2="443.262" y2="333"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="693.428" y1="324.734" x2="443.262" y2="284.466"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="757" y1="374" x2="508" y2="333"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="757" y1="324.734" x2="508" y2="284.466"/> + <g> + <ellipse style="fill: #ffffff" cx="815.44" cy="343.984" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="815.44" cy="343.984" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="815.44" cy="343.984" rx="8.5" ry="8.5"/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="823.94" y1="343.984" x2="980.274" y2="344.012"/> + <polygon style="fill: #000000" points="987.774,344.014 977.773,349.012 980.274,344.012 977.775,339.012 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="987.774,344.014 977.773,349.012 980.274,344.012 977.775,339.012 "/> + </g> + <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="849.248" y="333.8"> + <tspan x="849.248" y="333.8">pad 3 (source)</tspan> + </text> + <text style="fill: #0000ff;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="197" y="91"> + <tspan x="197" y="91">sink</tspan> + <tspan x="197" y="107">crop</tspan> + <tspan x="197" y="123">selection</tspan> + </text> + <text style="fill: #a020f0;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="553" y="95"> + <tspan x="553" y="95">source</tspan> + <tspan x="553" y="111">crop</tspan> + <tspan x="553" y="127">selection</tspan> + </text> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" x1="211" y1="132" x2="166.21" y2="135.287"/> + <polygon style="fill: #0000ff" points="158.73,135.836 168.337,130.118 166.21,135.287 169.069,140.091 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" points="158.73,135.836 168.337,130.118 166.21,135.287 169.069,140.091 "/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" x1="209" y1="131" x2="115.581" y2="306.209"/> + <polygon style="fill: #0000ff" points="112.052,312.827 112.345,301.65 115.581,306.209 121.169,306.355 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" points="112.052,312.827 112.345,301.65 115.581,306.209 121.169,306.355 "/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x1="550.492" y1="133.214" x2="514.916" y2="186.469"/> + <polygon style="fill: #a020f0" points="510.75,192.706 512.147,181.613 514.916,186.469 520.463,187.168 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" points="510.75,192.706 512.147,181.613 514.916,186.469 520.463,187.168 "/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x1="550.072" y1="133.787" x2="510.618" y2="275.089"/> + <polygon style="fill: #a020f0" points="508.601,282.312 506.475,271.336 510.618,275.089 516.106,274.025 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" points="508.601,282.312 506.475,271.336 510.618,275.089 516.106,274.025 "/> + </g> +</svg> diff --git a/Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.dia b/Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.dia new file mode 100644 index 000000000000..0cd50a7bda80 --- /dev/null +++ b/Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.dia @@ -0,0 +1,1152 @@ +<?xml version="1.0" encoding="UTF-8"?> +<dia:diagram xmlns:dia="http://www.lysator.liu.se/~alla/dia/"> + <dia:diagramdata> + <dia:attribute name="background"> + <dia:color val="#ffffff"/> + </dia:attribute> + <dia:attribute name="pagebreak"> + <dia:color val="#000099"/> + </dia:attribute> + <dia:attribute name="paper"> + <dia:composite type="paper"> + <dia:attribute name="name"> + <dia:string>#A4#</dia:string> + </dia:attribute> + <dia:attribute name="tmargin"> + <dia:real val="2.8222000598907471"/> + </dia:attribute> + <dia:attribute name="bmargin"> + <dia:real val="2.8222000598907471"/> + </dia:attribute> + <dia:attribute name="lmargin"> + <dia:real val="2.8222000598907471"/> + </dia:attribute> + <dia:attribute name="rmargin"> + <dia:real val="2.8222000598907471"/> + </dia:attribute> + <dia:attribute name="is_portrait"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="scaling"> + <dia:real val="0.49000000953674316"/> + </dia:attribute> + <dia:attribute name="fitto"> + <dia:boolean val="false"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="grid"> + <dia:composite type="grid"> + <dia:attribute name="width_x"> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="width_y"> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="visible_x"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="visible_y"> + <dia:int val="1"/> + </dia:attribute> + <dia:composite type="color"/> + </dia:composite> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#d8e5e5"/> + </dia:attribute> + <dia:attribute name="guides"> + <dia:composite type="guides"> + <dia:attribute name="hguides"/> + <dia:attribute name="vguides"/> + </dia:composite> + </dia:attribute> + </dia:diagramdata> + <dia:layer name="Background" visible="true" active="true"> + <dia:object type="Standard - Box" version="0" id="O0"> + <dia:attribute name="obj_pos"> + <dia:point val="-0.4,6.5"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-0.45,6.45;39.95,22.9"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="-0.4,6.5"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="40.299999999999997"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="16.349999999999998"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="false"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O1"> + <dia:attribute name="obj_pos"> + <dia:point val="0.225,9.45"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="0.175,9.4;8.225,14.7"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="0.225,9.45"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="7.9499999999999975"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="5.1999999999999975"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#a52a2a"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O2"> + <dia:attribute name="obj_pos"> + <dia:point val="2.475,10.2"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="2.425,10.15;7.225,14.1"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="2.475,10.2"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="4.6999999999999975"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="3.8499999999999979"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#0000ff"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O3"> + <dia:attribute name="obj_pos"> + <dia:point val="3,11.2"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="3,10.605;5.8775,12.9525"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#sink +crop +selection#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="3,11.2"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#0000ff"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O4"> + <dia:attribute name="obj_pos"> + <dia:point val="1.475,7.9"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="1.475,7.305;1.475,8.0525"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>##</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="1.475,7.9"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O5"> + <dia:attribute name="obj_pos"> + <dia:point val="0.426918,7.89569"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="0.426918,7.30069;3.90942,8.84819"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#sink media +bus format#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="0.426918,7.89569"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#a52a2a"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O6"> + <dia:attribute name="obj_pos"> + <dia:point val="16.6822,9.28251"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="16.6322,9.23251;24.9922,17.9564"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="16.6822,9.28251"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="8.2600228398861297"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="8.6238900617957164"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#00ff00"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O7"> + <dia:attribute name="obj_pos"> + <dia:point val="16.6822,17.9064"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="2.41365,13.9886;16.7436,17.9678"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="16.6822,17.9064"/> + <dia:point val="2.475,14.05"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O6" connection="5"/> + <dia:connection handle="1" to="O2" connection="5"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O8"> + <dia:attribute name="obj_pos"> + <dia:point val="16.6822,9.28251"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="2.42188,9.22939;16.7353,10.2531"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="16.6822,9.28251"/> + <dia:point val="2.475,10.2"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O6" connection="0"/> + <dia:connection handle="1" to="O2" connection="0"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O9"> + <dia:attribute name="obj_pos"> + <dia:point val="24.9422,17.9064"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="7.11553,13.9905;25.0017,17.9659"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="24.9422,17.9064"/> + <dia:point val="7.175,14.05"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O6" connection="7"/> + <dia:connection handle="1" to="O2" connection="7"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O10"> + <dia:attribute name="obj_pos"> + <dia:point val="24.9422,9.28251"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="7.12249,9.23;24.9947,10.2525"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="24.9422,9.28251"/> + <dia:point val="7.175,10.2"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O6" connection="2"/> + <dia:connection handle="1" to="O2" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O11"> + <dia:attribute name="obj_pos"> + <dia:point val="16.7352,7.47209"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="16.7352,6.87709;22.5602,8.42459"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#sink compose +selection (scaling)#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="16.7352,7.47209"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#00ff00"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O12"> + <dia:attribute name="obj_pos"> + <dia:point val="19.1161,9.97825"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="19.0661,9.92825;24.1754,13.6009"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="19.1161,9.97825"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="5.009308462554376"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="3.5726155970598077"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#a020f0"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O13"> + <dia:attribute name="obj_pos"> + <dia:point val="27.1661,7.47209"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="27.1661,6.87709;30.0436,9.22459"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#source +crop +selection#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="27.1661,7.47209"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#a020f0"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O14"> + <dia:attribute name="obj_pos"> + <dia:point val="34.575,7.8564"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="34.575,7.2614;38.8975,8.8089"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#source media +bus format#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="34.575,7.8564"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#8b6914"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O15"> + <dia:attribute name="obj_pos"> + <dia:point val="34.5244,11.2917"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="34.4744,11.2417;39.5837,14.9143"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="34.5244,11.2917"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="5.009308462554376"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="3.5726155970598077"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#8b6914"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O16"> + <dia:attribute name="obj_pos"> + <dia:point val="34.5244,14.8643"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="19.062,13.4968;34.5785,14.9184"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="34.5244,14.8643"/> + <dia:point val="19.1161,13.5509"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O15" connection="5"/> + <dia:connection handle="1" to="O12" connection="5"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O17"> + <dia:attribute name="obj_pos"> + <dia:point val="34.5244,11.2917"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="19.062,9.92418;34.5785,11.3458"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="34.5244,11.2917"/> + <dia:point val="19.1161,9.97825"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O15" connection="0"/> + <dia:connection handle="1" to="O12" connection="0"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O18"> + <dia:attribute name="obj_pos"> + <dia:point val="39.5337,14.8643"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="24.0713,13.4968;39.5878,14.9184"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="39.5337,14.8643"/> + <dia:point val="24.1254,13.5509"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O15" connection="7"/> + <dia:connection handle="1" to="O12" connection="7"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O19"> + <dia:attribute name="obj_pos"> + <dia:point val="39.5337,11.2917"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="24.0713,9.92418;39.5878,11.3458"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="39.5337,11.2917"/> + <dia:point val="24.1254,9.97825"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O15" connection="2"/> + <dia:connection handle="1" to="O12" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Geometric - Perfect Circle" version="1" id="O20"> + <dia:attribute name="obj_pos"> + <dia:point val="39.98,12.0742"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="39.93,12.0242;40.88,12.9742"/> + </dia:attribute> + <dia:attribute name="meta"> + <dia:composite type="dict"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="39.98,12.0742"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="line_width"> + <dia:real val="0.10000000000000001"/> + </dia:attribute> + <dia:attribute name="line_colour"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="fill_colour"> + <dia:color val="#ffffff"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="0"/> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="flip_horizontal"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="flip_vertical"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="subscale"> + <dia:real val="1"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O21"> + <dia:attribute name="obj_pos"> + <dia:point val="40.83,12.4992"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="40.78,12.1388;49.2453,12.8624"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="40.83,12.4992"/> + <dia:point val="49.1335,12.5007"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O20" connection="3"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O22"> + <dia:attribute name="obj_pos"> + <dia:point val="42.0954,11.99"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="42.0954,11.395;46.7404,12.1425"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#pad 1 (source)#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="42.0954,11.99"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Geometric - Perfect Circle" version="1" id="O23"> + <dia:attribute name="obj_pos"> + <dia:point val="-1.44491,11.6506"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-1.49491,11.6006;-0.54491,12.5506"/> + </dia:attribute> + <dia:attribute name="meta"> + <dia:composite type="dict"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="-1.44491,11.6506"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="line_width"> + <dia:real val="0.10000000000000001"/> + </dia:attribute> + <dia:attribute name="line_colour"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="fill_colour"> + <dia:color val="#ffffff"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="0"/> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="flip_horizontal"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="flip_vertical"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="subscale"> + <dia:real val="1"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O24"> + <dia:attribute name="obj_pos"> + <dia:point val="-9.61991,12.09"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-9.67,11.7149;-1.33311,12.4385"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="-9.61991,12.09"/> + <dia:point val="-1.44491,12.0756"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="1" to="O23" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O25"> + <dia:attribute name="obj_pos"> + <dia:point val="-7.39291,11.49"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="-7.39291,10.895;-3.58791,11.6425"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#pad 0 (sink)#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="-7.39291,11.49"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O26"> + <dia:attribute name="obj_pos"> + <dia:point val="19.4911,13.8333"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="19.4411,13.7833;24.5504,17.4559"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="19.4911,13.8333"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="5.009308462554376"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="3.5726155970598077"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#a020f0"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="false"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Box" version="0" id="O27"> + <dia:attribute name="obj_pos"> + <dia:point val="34.4994,17.2967"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="34.4494,17.2467;39.5587,20.9193"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="34.4994,17.2967"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="5.009308462554376"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="3.5726155970598077"/> + </dia:attribute> + <dia:attribute name="border_width"> + <dia:real val="0.10000000149011612"/> + </dia:attribute> + <dia:attribute name="border_color"> + <dia:color val="#8b6914"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O28"> + <dia:attribute name="obj_pos"> + <dia:point val="34.4994,20.8693"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="19.4311,17.3459;34.5594,20.9293"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="34.4994,20.8693"/> + <dia:point val="19.4911,17.4059"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O27" connection="5"/> + <dia:connection handle="1" to="O26" connection="5"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O29"> + <dia:attribute name="obj_pos"> + <dia:point val="34.4994,17.2967"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="19.4311,13.7733;34.5594,17.3567"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="34.4994,17.2967"/> + <dia:point val="19.4911,13.8333"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O27" connection="0"/> + <dia:connection handle="1" to="O26" connection="0"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O30"> + <dia:attribute name="obj_pos"> + <dia:point val="39.5087,20.8693"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="24.4404,17.3459;39.5687,20.9293"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="39.5087,20.8693"/> + <dia:point val="24.5004,17.4059"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O27" connection="7"/> + <dia:connection handle="1" to="O26" connection="7"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O31"> + <dia:attribute name="obj_pos"> + <dia:point val="39.5087,17.2967"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="24.4404,13.7733;39.5687,17.3567"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="39.5087,17.2967"/> + <dia:point val="24.5004,13.8333"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#e60505"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="4"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O27" connection="2"/> + <dia:connection handle="1" to="O26" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Geometric - Perfect Circle" version="1" id="O32"> + <dia:attribute name="obj_pos"> + <dia:point val="39.855,18.7792"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="39.805,18.7292;40.755,19.6792"/> + </dia:attribute> + <dia:attribute name="meta"> + <dia:composite type="dict"/> + </dia:attribute> + <dia:attribute name="elem_corner"> + <dia:point val="39.855,18.7792"/> + </dia:attribute> + <dia:attribute name="elem_width"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="elem_height"> + <dia:real val="0.84999999999999787"/> + </dia:attribute> + <dia:attribute name="line_width"> + <dia:real val="0.10000000000000001"/> + </dia:attribute> + <dia:attribute name="line_colour"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="fill_colour"> + <dia:color val="#ffffff"/> + </dia:attribute> + <dia:attribute name="show_background"> + <dia:boolean val="true"/> + </dia:attribute> + <dia:attribute name="line_style"> + <dia:enum val="0"/> + <dia:real val="1"/> + </dia:attribute> + <dia:attribute name="flip_horizontal"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="flip_vertical"> + <dia:boolean val="false"/> + </dia:attribute> + <dia:attribute name="subscale"> + <dia:real val="1"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O33"> + <dia:attribute name="obj_pos"> + <dia:point val="40.705,19.2042"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="40.655,18.8438;49.1203,19.5674"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="40.705,19.2042"/> + <dia:point val="49.0085,19.2057"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="0" to="O32" connection="3"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Text" version="1" id="O34"> + <dia:attribute name="obj_pos"> + <dia:point val="41.9704,18.695"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="41.9704,18.1;46.6154,18.8475"/> + </dia:attribute> + <dia:attribute name="text"> + <dia:composite type="text"> + <dia:attribute name="string"> + <dia:string>#pad 2 (source)#</dia:string> + </dia:attribute> + <dia:attribute name="font"> + <dia:font family="sans" style="0" name="Helvetica"/> + </dia:attribute> + <dia:attribute name="height"> + <dia:real val="0.80000000000000004"/> + </dia:attribute> + <dia:attribute name="pos"> + <dia:point val="41.9704,18.695"/> + </dia:attribute> + <dia:attribute name="color"> + <dia:color val="#000000"/> + </dia:attribute> + <dia:attribute name="alignment"> + <dia:enum val="0"/> + </dia:attribute> + </dia:composite> + </dia:attribute> + <dia:attribute name="valign"> + <dia:enum val="3"/> + </dia:attribute> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O35"> + <dia:attribute name="obj_pos"> + <dia:point val="27.3,9.55"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="24.0146,9.49376;27.3562,10.255"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="27.3,9.55"/> + <dia:point val="24.1254,9.97825"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#a020f0"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="1" to="O12" connection="2"/> + </dia:connections> + </dia:object> + <dia:object type="Standard - Line" version="0" id="O36"> + <dia:attribute name="obj_pos"> + <dia:point val="27.3454,9.53624"/> + </dia:attribute> + <dia:attribute name="obj_bb"> + <dia:rectangle val="24.4311,9.46695;27.4147,13.9265"/> + </dia:attribute> + <dia:attribute name="conn_endpoints"> + <dia:point val="27.3454,9.53624"/> + <dia:point val="24.5004,13.8333"/> + </dia:attribute> + <dia:attribute name="numcp"> + <dia:int val="1"/> + </dia:attribute> + <dia:attribute name="line_color"> + <dia:color val="#a020f0"/> + </dia:attribute> + <dia:attribute name="end_arrow"> + <dia:enum val="22"/> + </dia:attribute> + <dia:attribute name="end_arrow_length"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:attribute name="end_arrow_width"> + <dia:real val="0.5"/> + </dia:attribute> + <dia:connections> + <dia:connection handle="1" to="O26" connection="2"/> + </dia:connections> + </dia:object> + </dia:layer> +</dia:diagram> diff --git a/Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.svg b/Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.svg new file mode 100644 index 000000000000..2340c0f8bc92 --- /dev/null +++ b/Documentation/DocBook/media/v4l/subdev-image-processing-scaling-multi-source.svg @@ -0,0 +1,116 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/PR-SVG-20010719/DTD/svg10.dtd"> +<svg width="59cm" height="17cm" viewBox="-194 128 1179 330" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink"> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x="-8" y="130" width="806" height="327"/> + <g> + <rect style="fill: #ffffff" x="4.5" y="189" width="159" height="104"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a52a2a" x="4.5" y="189" width="159" height="104"/> + </g> + <g> + <rect style="fill: #ffffff" x="49.5" y="204" width="94" height="77"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #0000ff" x="49.5" y="204" width="94" height="77"/> + </g> + <text style="fill: #0000ff;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="60" y="224"> + <tspan x="60" y="224">sink</tspan> + <tspan x="60" y="240">crop</tspan> + <tspan x="60" y="256">selection</tspan> + </text> + <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="29.5" y="158"> + <tspan x="29.5" y="158"></tspan> + </text> + <text style="fill: #a52a2a;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="8.53836" y="157.914"> + <tspan x="8.53836" y="157.914">sink media</tspan> + <tspan x="8.53836" y="173.914">bus format</tspan> + </text> + <g> + <rect style="fill: #ffffff" x="333.644" y="185.65" width="165.2" height="172.478"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #00ff00" x="333.644" y="185.65" width="165.2" height="172.478"/> + </g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="333.644" y1="358.128" x2="49.5" y2="281"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="333.644" y1="185.65" x2="49.5" y2="204"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="498.844" y1="358.128" x2="143.5" y2="281"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="498.844" y1="185.65" x2="143.5" y2="204"/> + <text style="fill: #00ff00;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="334.704" y="149.442"> + <tspan x="334.704" y="149.442">sink compose</tspan> + <tspan x="334.704" y="165.442">selection (scaling)</tspan> + </text> + <g> + <rect style="fill: #ffffff" x="382.322" y="199.565" width="100.186" height="71.4523"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x="382.322" y="199.565" width="100.186" height="71.4523"/> + </g> + <text style="fill: #a020f0;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="543.322" y="149.442"> + <tspan x="543.322" y="149.442">source</tspan> + <tspan x="543.322" y="165.442">crop</tspan> + <tspan x="543.322" y="181.442">selection</tspan> + </text> + <text style="fill: #8b6914;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="691.5" y="157.128"> + <tspan x="691.5" y="157.128">source media</tspan> + <tspan x="691.5" y="173.128">bus format</tspan> + </text> + <g> + <rect style="fill: #ffffff" x="690.488" y="225.834" width="100.186" height="71.4523"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #8b6914" x="690.488" y="225.834" width="100.186" height="71.4523"/> + </g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="690.488" y1="297.286" x2="382.322" y2="271.018"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="690.488" y1="225.834" x2="382.322" y2="199.565"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="790.674" y1="297.286" x2="482.508" y2="271.018"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="790.674" y1="225.834" x2="482.508" y2="199.565"/> + <g> + <ellipse style="fill: #ffffff" cx="808.1" cy="249.984" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="808.1" cy="249.984" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="808.1" cy="249.984" rx="8.5" ry="8.5"/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="816.6" y1="249.984" x2="972.934" y2="250.012"/> + <polygon style="fill: #000000" points="980.434,250.014 970.433,255.012 972.934,250.012 970.435,245.012 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="980.434,250.014 970.433,255.012 972.934,250.012 970.435,245.012 "/> + </g> + <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="841.908" y="239.8"> + <tspan x="841.908" y="239.8">pad 1 (source)</tspan> + </text> + <g> + <ellipse style="fill: #ffffff" cx="-20.3982" cy="241.512" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-20.3982" cy="241.512" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="-20.3982" cy="241.512" rx="8.5" ry="8.5"/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="-192.398" y1="241.8" x2="-38.6343" y2="241.529"/> + <polygon style="fill: #000000" points="-31.1343,241.516 -41.1254,246.534 -38.6343,241.529 -41.1431,236.534 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="-31.1343,241.516 -41.1254,246.534 -38.6343,241.529 -41.1431,236.534 "/> + </g> + <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="-147.858" y="229.8"> + <tspan x="-147.858" y="229.8">pad 0 (sink)</tspan> + </text> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x="389.822" y="276.666" width="100.186" height="71.4523"/> + <g> + <rect style="fill: #ffffff" x="689.988" y="345.934" width="100.186" height="71.4523"/> + <rect style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #8b6914" x="689.988" y="345.934" width="100.186" height="71.4523"/> + </g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="689.988" y1="417.386" x2="389.822" y2="348.118"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="689.988" y1="345.934" x2="389.822" y2="276.666"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="790.174" y1="417.386" x2="490.008" y2="348.118"/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke-dasharray: 4; stroke: #e60505" x1="790.174" y1="345.934" x2="490.008" y2="276.666"/> + <g> + <ellipse style="fill: #ffffff" cx="805.6" cy="384.084" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="805.6" cy="384.084" rx="8.5" ry="8.5"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="805.6" cy="384.084" rx="8.5" ry="8.5"/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="814.1" y1="384.084" x2="970.434" y2="384.112"/> + <polygon style="fill: #000000" points="977.934,384.114 967.933,389.112 970.434,384.112 967.935,379.112 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="977.934,384.114 967.933,389.112 970.434,384.112 967.935,379.112 "/> + </g> + <text style="fill: #000000;text-anchor:start;font-size:12.8;font-family:sanserif;font-style:normal;font-weight:normal" x="839.408" y="373.9"> + <tspan x="839.408" y="373.9">pad 2 (source)</tspan> + </text> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x1="546" y1="191" x2="492.157" y2="198.263"/> + <polygon style="fill: #a020f0" points="484.724,199.266 493.966,192.974 492.157,198.263 495.303,202.884 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" points="484.724,199.266 493.966,192.974 492.157,198.263 495.303,202.884 "/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" x1="546.908" y1="190.725" x2="495.383" y2="268.548"/> + <polygon style="fill: #a020f0" points="491.242,274.802 492.594,263.703 495.383,268.548 500.932,269.224 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #a020f0" points="491.242,274.802 492.594,263.703 495.383,268.548 500.932,269.224 "/> + </g> +</svg> diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index 8ae38876172e..015c561754b7 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -28,8 +28,8 @@ documentation.</contrib> <firstname>Hans</firstname> <surname>Verkuil</surname> <contrib>Designed and documented the VIDIOC_LOG_STATUS ioctl, -the extended control ioctls and major parts of the sliced VBI -API.</contrib> +the extended control ioctls, major parts of the sliced VBI API, the +MPEG encoder and decoder APIs and the DV Timings API.</contrib> <affiliation> <address> <email>hverkuil@xs4all.nl</email> @@ -96,6 +96,17 @@ Remote Controller chapter.</contrib> </address> </affiliation> </author> + + <author> + <firstname>Sakari</firstname> + <surname>Ailus</surname> + <contrib>Subdev selections API.</contrib> + <affiliation> + <address> + <email>sakari.ailus@iki.fi</email> + </address> + </affiliation> + </author> </authorgroup> <copyright> @@ -112,6 +123,7 @@ Remote Controller chapter.</contrib> <year>2009</year> <year>2010</year> <year>2011</year> + <year>2012</year> <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab, Pawel Osciak</holder> @@ -128,6 +140,28 @@ structs, ioctls) must be noted in more detail in the history chapter applications. --> <revision> + <revnumber>3.5</revnumber> + <date>2012-05-07</date> + <authorinitials>sa, sn</authorinitials> + <revremark>Added V4L2_CTRL_TYPE_INTEGER_MENU and V4L2 subdev + selections API. Improved the description of V4L2_CID_COLORFX + control, added V4L2_CID_COLORFX_CBCR control. + Added camera controls V4L2_CID_AUTO_EXPOSURE_BIAS, + V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE, V4L2_CID_IMAGE_STABILIZATION, + V4L2_CID_ISO_SENSITIVITY, V4L2_CID_ISO_SENSITIVITY_AUTO, + V4L2_CID_EXPOSURE_METERING, V4L2_CID_SCENE_MODE, + V4L2_CID_3A_LOCK, V4L2_CID_AUTO_FOCUS_START, + V4L2_CID_AUTO_FOCUS_STOP, V4L2_CID_AUTO_FOCUS_STATUS + and V4L2_CID_AUTO_FOCUS_RANGE. + </revremark> + <date>2012-05-01</date> + <authorinitials>hv</authorinitials> + <revremark>Added VIDIOC_ENUM_DV_TIMINGS, VIDIOC_QUERY_DV_TIMINGS and + VIDIOC_DV_TIMINGS_CAP. + </revremark> + </revision> + + <revision> <revnumber>3.4</revnumber> <date>2012-01-25</date> <authorinitials>sn</authorinitials> @@ -433,7 +467,7 @@ and discussions on the V4L mailing list.</revremark> </partinfo> <title>Video for Linux Two API Specification</title> - <subtitle>Revision 3.3</subtitle> + <subtitle>Revision 3.5</subtitle> <chapter id="common"> &sub-common; @@ -491,10 +525,12 @@ and discussions on the V4L mailing list.</revremark> &sub-dbg-g-register; &sub-decoder-cmd; &sub-dqevent; + &sub-dv-timings-cap; &sub-encoder-cmd; &sub-enumaudio; &sub-enumaudioout; &sub-enum-dv-presets; + &sub-enum-dv-timings; &sub-enum-fmt; &sub-enum-framesizes; &sub-enum-frameintervals; @@ -529,6 +565,7 @@ and discussions on the V4L mailing list.</revremark> &sub-querycap; &sub-queryctrl; &sub-query-dv-preset; + &sub-query-dv-timings; &sub-querystd; &sub-prepare-buf; &sub-reqbufs; @@ -540,6 +577,7 @@ and discussions on the V4L mailing list.</revremark> &sub-subdev-g-crop; &sub-subdev-g-fmt; &sub-subdev-g-frame-interval; + &sub-subdev-g-selection; &sub-subscribe-event; <!-- End of ioctls. --> &sub-mmap; diff --git a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml index 73ae8a6cd004..765549ff8a71 100644 --- a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml +++ b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml @@ -48,6 +48,12 @@ <refsect1> <title>Description</title> + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental"> experimental </link> + interface and may change in the future.</para> + </note> + <para>This ioctl is used to create buffers for <link linkend="mmap">memory mapped</link> or <link linkend="userp">user pointer</link> I/O. It can be used as an alternative or in addition to the @@ -94,16 +100,18 @@ information.</para> <entry>The number of buffers requested or granted.</entry> </row> <row> - <entry>&v4l2-memory;</entry> + <entry>__u32</entry> <entry><structfield>memory</structfield></entry> <entry>Applications set this field to <constant>V4L2_MEMORY_MMAP</constant> or -<constant>V4L2_MEMORY_USERPTR</constant>.</entry> +<constant>V4L2_MEMORY_USERPTR</constant>. See <xref linkend="v4l2-memory" +/></entry> </row> <row> - <entry>&v4l2-format;</entry> + <entry>__u32</entry> <entry><structfield>format</structfield></entry> - <entry>Filled in by the application, preserved by the driver.</entry> + <entry>Filled in by the application, preserved by the driver. + See <xref linkend="v4l2-format" />.</entry> </row> <row> <entry>__u32</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-cropcap.xml b/Documentation/DocBook/media/v4l/vidioc-cropcap.xml index b4f2f255211e..f1bac2c6e978 100644 --- a/Documentation/DocBook/media/v4l/vidioc-cropcap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-cropcap.xml @@ -65,7 +65,7 @@ output.</para> &cs-str; <tbody valign="top"> <row> - <entry>&v4l2-buf-type;</entry> + <entry>__u32</entry> <entry><structfield>type</structfield></entry> <entry>Type of the data stream, set by the application. Only these types are valid here: @@ -73,7 +73,7 @@ Only these types are valid here: <constant>V4L2_BUF_TYPE_VIDEO_OUTPUT</constant>, <constant>V4L2_BUF_TYPE_VIDEO_OVERLAY</constant>, and custom (driver defined) types with code <constant>V4L2_BUF_TYPE_PRIVATE</constant> -and higher.</entry> +and higher. See <xref linkend="v4l2-buf-type" />.</entry> </row> <row> <entry>struct <link linkend="v4l2-rect-crop">v4l2_rect</link></entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml b/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml new file mode 100644 index 000000000000..6673ce582050 --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-dv-timings-cap.xml @@ -0,0 +1,211 @@ +<refentry id="vidioc-dv-timings-cap"> + <refmeta> + <refentrytitle>ioctl VIDIOC_DV_TIMINGS_CAP</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_DV_TIMINGS_CAP</refname> + <refpurpose>The capabilities of the Digital Video receiver/transmitter</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_dv_timings_cap *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_DV_TIMINGS_CAP</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental"> experimental </link> + interface and may change in the future.</para> + </note> + + <para>To query the available timings, applications initialize the +<structfield>index</structfield> field and zero the reserved array of &v4l2-dv-timings-cap; +and call the <constant>VIDIOC_DV_TIMINGS_CAP</constant> ioctl with a pointer to this +structure. Drivers fill the rest of the structure or return an +&EINVAL; when the index is out of bounds. To enumerate all supported DV timings, +applications shall begin at index zero, incrementing by one until the +driver returns <errorcode>EINVAL</errorcode>. Note that drivers may enumerate a +different set of DV timings after switching the video input or +output.</para> + + <table pgwide="1" frame="none" id="v4l2-bt-timings-cap"> + <title>struct <structname>v4l2_bt_timings_cap</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>min_width</structfield></entry> + <entry>Minimum width of the active video in pixels.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>max_width</structfield></entry> + <entry>Maximum width of the active video in pixels.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>min_height</structfield></entry> + <entry>Minimum height of the active video in lines.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>max_height</structfield></entry> + <entry>Maximum height of the active video in lines.</entry> + </row> + <row> + <entry>__u64</entry> + <entry><structfield>min_pixelclock</structfield></entry> + <entry>Minimum pixelclock frequency in Hz.</entry> + </row> + <row> + <entry>__u64</entry> + <entry><structfield>max_pixelclock</structfield></entry> + <entry>Maximum pixelclock frequency in Hz.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>standards</structfield></entry> + <entry>The video standard(s) supported by the hardware. + See <xref linkend="dv-bt-standards"/> for a list of standards.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>capabilities</structfield></entry> + <entry>Several flags giving more information about the capabilities. + See <xref linkend="dv-bt-cap-capabilities"/> for a description of the flags. + </entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[16]</entry> + <entry></entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="v4l2-dv-timings-cap"> + <title>struct <structname>v4l2_dv_timings_cap</structname></title> + <tgroup cols="4"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>type</structfield></entry> + <entry>Type of DV timings as listed in <xref linkend="dv-timing-types"/>.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[3]</entry> + <entry>Reserved for future extensions. Drivers must set the array to zero.</entry> + </row> + <row> + <entry>union</entry> + <entry><structfield></structfield></entry> + <entry></entry> + </row> + <row> + <entry></entry> + <entry>&v4l2-bt-timings-cap;</entry> + <entry><structfield>bt</structfield></entry> + <entry>BT.656/1120 timings capabilities of the hardware.</entry> + </row> + <row> + <entry></entry> + <entry>__u32</entry> + <entry><structfield>raw_data</structfield>[32]</entry> + <entry></entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="dv-bt-cap-capabilities"> + <title>DV BT Timing capabilities</title> + <tgroup cols="2"> + &cs-str; + <tbody valign="top"> + <row> + <entry>Flag</entry> + <entry>Description</entry> + </row> + <row> + <entry></entry> + <entry></entry> + </row> + <row> + <entry>V4L2_DV_BT_CAP_INTERLACED</entry> + <entry>Interlaced formats are supported. + </entry> + </row> + <row> + <entry>V4L2_DV_BT_CAP_PROGRESSIVE</entry> + <entry>Progressive formats are supported. + </entry> + </row> + <row> + <entry>V4L2_DV_BT_CAP_REDUCED_BLANKING</entry> + <entry>CVT/GTF specific: the timings can make use of reduced blanking (CVT) +or the 'Secondary GTF' curve (GTF). + </entry> + </row> + <row> + <entry>V4L2_DV_BT_CAP_CUSTOM</entry> + <entry>Can support non-standard timings, i.e. timings not belonging to the +standards set in the <structfield>standards</structfield> field. + </entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> + +<!-- +Local Variables: +mode: sgml +sgml-parent-document: "v4l2.sgml" +indent-tabs-mode: nil +End: +--> diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml index 0be17c232d3a..509f0012d2a6 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml @@ -48,6 +48,10 @@ <refsect1> <title>Description</title> + <para>This ioctl is <emphasis role="bold">deprecated</emphasis>. + New drivers and applications should use &VIDIOC-ENUM-DV-TIMINGS; instead. + </para> + <para>To query the attributes of a DV preset, applications initialize the <structfield>index</structfield> field and zero the reserved array of &v4l2-dv-enum-preset; and call the <constant>VIDIOC_ENUM_DV_PRESETS</constant> ioctl with a pointer to this diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml new file mode 100644 index 000000000000..24c3bf4fd29a --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml @@ -0,0 +1,119 @@ +<refentry id="vidioc-enum-dv-timings"> + <refmeta> + <refentrytitle>ioctl VIDIOC_ENUM_DV_TIMINGS</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_ENUM_DV_TIMINGS</refname> + <refpurpose>Enumerate supported Digital Video timings</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_enum_dv_timings *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_ENUM_DV_TIMINGS</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental"> experimental </link> + interface and may change in the future.</para> + </note> + + <para>While some DV receivers or transmitters support a wide range of timings, others +support only a limited number of timings. With this ioctl applications can enumerate a list +of known supported timings. Call &VIDIOC-DV-TIMINGS-CAP; to check if it also supports other +standards or even custom timings that are not in this list.</para> + + <para>To query the available timings, applications initialize the +<structfield>index</structfield> field and zero the reserved array of &v4l2-enum-dv-timings; +and call the <constant>VIDIOC_ENUM_DV_TIMINGS</constant> ioctl with a pointer to this +structure. Drivers fill the rest of the structure or return an +&EINVAL; when the index is out of bounds. To enumerate all supported DV timings, +applications shall begin at index zero, incrementing by one until the +driver returns <errorcode>EINVAL</errorcode>. Note that drivers may enumerate a +different set of DV timings after switching the video input or +output.</para> + + <table pgwide="1" frame="none" id="v4l2-enum-dv-timings"> + <title>struct <structname>v4l2_enum_dv_timings</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>index</structfield></entry> + <entry>Number of the DV timings, set by the +application.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[3]</entry> + <entry>Reserved for future extensions. Drivers must set the array to zero.</entry> + </row> + <row> + <entry>&v4l2-dv-timings;</entry> + <entry><structfield>timings</structfield></entry> + <entry>The timings.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The &v4l2-enum-dv-timings; <structfield>index</structfield> +is out of bounds.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> + +<!-- +Local Variables: +mode: sgml +sgml-parent-document: "v4l2.sgml" +indent-tabs-mode: nil +End: +--> diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml index 347d142e7431..81ebe48317fe 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml @@ -71,7 +71,7 @@ the application. This is in no way related to the <structfield> pixelformat</structfield> field.</entry> </row> <row> - <entry>&v4l2-buf-type;</entry> + <entry>__u32</entry> <entry><structfield>type</structfield></entry> <entry>Type of the data stream, set by the application. Only these types are valid here: @@ -81,7 +81,7 @@ Only these types are valid here: <constant>V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE</constant>, <constant>V4L2_BUF_TYPE_VIDEO_OVERLAY</constant>, and custom (driver defined) types with code <constant>V4L2_BUF_TYPE_PRIVATE</constant> -and higher.</entry> +and higher. See <xref linkend="v4l2-buf-type" />.</entry> </row> <row> <entry>__u32</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml index 9b8efcd6e947..46d5a044a537 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml @@ -285,7 +285,7 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009. <row> <entry><constant>V4L2_IN_CAP_CUSTOM_TIMINGS</constant></entry> <entry>0x00000002</entry> - <entry>This input supports setting custom video timings by using VIDIOC_S_DV_TIMINGS.</entry> + <entry>This input supports setting video timings by using VIDIOC_S_DV_TIMINGS.</entry> </row> <row> <entry><constant>V4L2_IN_CAP_STD</constant></entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml index a64d5ef103fa..428020000ef0 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml @@ -170,7 +170,7 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009. <row> <entry><constant>V4L2_OUT_CAP_CUSTOM_TIMINGS</constant></entry> <entry>0x00000002</entry> - <entry>This output supports setting custom video timings by using VIDIOC_S_DV_TIMINGS.</entry> + <entry>This output supports setting video timings by using VIDIOC_S_DV_TIMINGS.</entry> </row> <row> <entry><constant>V4L2_OUT_CAP_STD</constant></entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-crop.xml b/Documentation/DocBook/media/v4l/vidioc-g-crop.xml index 01a50640dce0..c4ff3b1887fb 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-crop.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-crop.xml @@ -100,14 +100,14 @@ changed and <constant>VIDIOC_S_CROP</constant> returns the &cs-str; <tbody valign="top"> <row> - <entry>&v4l2-buf-type;</entry> + <entry>__u32</entry> <entry><structfield>type</structfield></entry> <entry>Type of the data stream, set by the application. Only these types are valid here: <constant>V4L2_BUF_TYPE_VIDEO_CAPTURE</constant>, <constant>V4L2_BUF_TYPE_VIDEO_OUTPUT</constant>, <constant>V4L2_BUF_TYPE_VIDEO_OVERLAY</constant>, and custom (driver defined) types with code <constant>V4L2_BUF_TYPE_PRIVATE</constant> -and higher.</entry> +and higher. See <xref linkend="v4l2-buf-type" />.</entry> </row> <row> <entry>&v4l2-rect;</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml b/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml index 7940c1149393..61be9fa3803a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml @@ -48,6 +48,12 @@ <refsect1> <title>Description</title> + + <para>These ioctls are <emphasis role="bold">deprecated</emphasis>. + New drivers and applications should use &VIDIOC-G-DV-TIMINGS; and &VIDIOC-S-DV-TIMINGS; + instead. + </para> + <para>To query and select the current DV preset, applications use the <constant>VIDIOC_G_DV_PRESET</constant> and <constant>VIDIOC_S_DV_PRESET</constant> ioctls which take a pointer to a &v4l2-dv-preset; type as argument. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml index 4a8648ae9a63..eda1a2991bbe 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml @@ -7,7 +7,7 @@ <refnamediv> <refname>VIDIOC_G_DV_TIMINGS</refname> <refname>VIDIOC_S_DV_TIMINGS</refname> - <refpurpose>Get or set custom DV timings for input or output</refpurpose> + <refpurpose>Get or set DV timings for input or output</refpurpose> </refnamediv> <refsynopsisdiv> @@ -48,12 +48,15 @@ <refsect1> <title>Description</title> - <para>To set custom DV timings for the input or output, applications use the -<constant>VIDIOC_S_DV_TIMINGS</constant> ioctl and to get the current custom timings, + <para>To set DV timings for the input or output, applications use the +<constant>VIDIOC_S_DV_TIMINGS</constant> ioctl and to get the current timings, applications use the <constant>VIDIOC_G_DV_TIMINGS</constant> ioctl. The detailed timing information is filled in using the structure &v4l2-dv-timings;. These ioctls take a pointer to the &v4l2-dv-timings; structure as argument. If the ioctl is not supported or the timing values are not correct, the driver returns &EINVAL;.</para> +<para>The <filename>linux/v4l2-dv-timings.h</filename> header can be used to get the +timings of the formats in the <xref linkend="cea861" /> and <xref linkend="vesadmt" /> +standards.</para> </refsect1> <refsect1> @@ -83,12 +86,13 @@ or the timing values are not correct, the driver returns &EINVAL;.</para> <row> <entry>__u32</entry> <entry><structfield>width</structfield></entry> - <entry>Width of the active video in pixels</entry> + <entry>Width of the active video in pixels.</entry> </row> <row> <entry>__u32</entry> <entry><structfield>height</structfield></entry> - <entry>Height of the active video in lines</entry> + <entry>Height of the active video frame in lines. So for interlaced formats the + height of the active video in each field is <structfield>height</structfield>/2.</entry> </row> <row> <entry>__u32</entry> @@ -125,32 +129,52 @@ bit 0 (V4L2_DV_VSYNC_POS_POL) is for vertical sync polarity and bit 1 (V4L2_DV_H <row> <entry>__u32</entry> <entry><structfield>vfrontporch</structfield></entry> - <entry>Vertical front porch in lines</entry> + <entry>Vertical front porch in lines. For interlaced formats this refers to the + odd field (aka field 1).</entry> </row> <row> <entry>__u32</entry> <entry><structfield>vsync</structfield></entry> - <entry>Vertical sync length in lines</entry> + <entry>Vertical sync length in lines. For interlaced formats this refers to the + odd field (aka field 1).</entry> </row> <row> <entry>__u32</entry> <entry><structfield>vbackporch</structfield></entry> - <entry>Vertical back porch in lines</entry> + <entry>Vertical back porch in lines. For interlaced formats this refers to the + odd field (aka field 1).</entry> </row> <row> <entry>__u32</entry> <entry><structfield>il_vfrontporch</structfield></entry> - <entry>Vertical front porch in lines for bottom field of interlaced field formats</entry> + <entry>Vertical front porch in lines for the even field (aka field 2) of + interlaced field formats.</entry> </row> <row> <entry>__u32</entry> <entry><structfield>il_vsync</structfield></entry> - <entry>Vertical sync length in lines for bottom field of interlaced field formats</entry> + <entry>Vertical sync length in lines for the even field (aka field 2) of + interlaced field formats.</entry> </row> <row> <entry>__u32</entry> <entry><structfield>il_vbackporch</structfield></entry> - <entry>Vertical back porch in lines for bottom field of interlaced field formats</entry> + <entry>Vertical back porch in lines for the even field (aka field 2) of + interlaced field formats.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>standards</structfield></entry> + <entry>The video standard(s) this format belongs to. This will be filled in by + the driver. Applications must set this to 0. See <xref linkend="dv-bt-standards"/> + for a list of standards.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>flags</structfield></entry> + <entry>Several flags giving more information about the format. + See <xref linkend="dv-bt-flags"/> for a description of the flags. + </entry> </row> </tbody> </tgroup> @@ -211,6 +235,90 @@ bit 0 (V4L2_DV_VSYNC_POS_POL) is for vertical sync polarity and bit 1 (V4L2_DV_H </tbody> </tgroup> </table> + <table pgwide="1" frame="none" id="dv-bt-standards"> + <title>DV BT Timing standards</title> + <tgroup cols="2"> + &cs-str; + <tbody valign="top"> + <row> + <entry>Timing standard</entry> + <entry>Description</entry> + </row> + <row> + <entry></entry> + <entry></entry> + </row> + <row> + <entry>V4L2_DV_BT_STD_CEA861</entry> + <entry>The timings follow the CEA-861 Digital TV Profile standard</entry> + </row> + <row> + <entry>V4L2_DV_BT_STD_DMT</entry> + <entry>The timings follow the VESA Discrete Monitor Timings standard</entry> + </row> + <row> + <entry>V4L2_DV_BT_STD_CVT</entry> + <entry>The timings follow the VESA Coordinated Video Timings standard</entry> + </row> + <row> + <entry>V4L2_DV_BT_STD_GTF</entry> + <entry>The timings follow the VESA Generalized Timings Formula standard</entry> + </row> + </tbody> + </tgroup> + </table> + <table pgwide="1" frame="none" id="dv-bt-flags"> + <title>DV BT Timing flags</title> + <tgroup cols="2"> + &cs-str; + <tbody valign="top"> + <row> + <entry>Flag</entry> + <entry>Description</entry> + </row> + <row> + <entry></entry> + <entry></entry> + </row> + <row> + <entry>V4L2_DV_FL_REDUCED_BLANKING</entry> + <entry>CVT/GTF specific: the timings use reduced blanking (CVT) or the 'Secondary +GTF' curve (GTF). In both cases the horizontal and/or vertical blanking +intervals are reduced, allowing a higher resolution over the same +bandwidth. This is a read-only flag, applications must not set this. + </entry> + </row> + <row> + <entry>V4L2_DV_FL_CAN_REDUCE_FPS</entry> + <entry>CEA-861 specific: set for CEA-861 formats with a framerate that is a multiple +of six. These formats can be optionally played at 1 / 1.001 speed to +be compatible with 60 Hz based standards such as NTSC and PAL-M that use a framerate of +29.97 frames per second. If the transmitter can't generate such frequencies, then the +flag will also be cleared. This is a read-only flag, applications must not set this. + </entry> + </row> + <row> + <entry>V4L2_DV_FL_REDUCED_FPS</entry> + <entry>CEA-861 specific: only valid for video transmitters, the flag is cleared +by receivers. It is also only valid for formats with the V4L2_DV_FL_CAN_REDUCE_FPS flag +set, for other formats the flag will be cleared by the driver. + +If the application sets this flag, then the pixelclock used to set up the transmitter is +divided by 1.001 to make it compatible with NTSC framerates. If the transmitter +can't generate such frequencies, then the flag will also be cleared. + </entry> + </row> + <row> + <entry>V4L2_DV_FL_HALF_LINE</entry> + <entry>Specific to interlaced formats: if set, then field 1 (aka the odd field) +is really one half-line longer and field 2 (aka the even field) is really one half-line +shorter, so each field has exactly the same number of half-lines. Whether half-lines can be +detected or used depends on the hardware. + </entry> + </row> + </tbody> + </tgroup> + </table> </refsect1> <refsect1> &return-value; diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml index b17a7aac6997..e3d5afcdafbb 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml @@ -265,6 +265,32 @@ These controls are described in <xref These controls are described in <xref linkend="flash-controls" />.</entry> </row> + <row> + <entry><constant>V4L2_CTRL_CLASS_JPEG</constant></entry> + <entry>0x9d0000</entry> + <entry>The class containing JPEG compression controls. +These controls are described in <xref + linkend="jpeg-controls" />.</entry> + </row> + <row> + <entry><constant>V4L2_CTRL_CLASS_IMAGE_SOURCE</constant></entry> + <entry>0x9e0000</entry> <entry>The class containing image + source controls. These controls are described in <xref + linkend="image-source-controls" />.</entry> + </row> + <row> + <entry><constant>V4L2_CTRL_CLASS_IMAGE_PROC</constant></entry> + <entry>0x9f0000</entry> <entry>The class containing image + processing controls. These controls are described in <xref + linkend="image-process-controls" />.</entry> + </row> + <row> + <entry><constant>V4L2_CTRL_CLASS_JPEG</constant></entry> + <entry>0x9d0000</entry> + <entry>The class containing JPEG compression controls. +These controls are described in <xref + linkend="jpeg-controls" />.</entry> + </row> </tbody> </tgroup> </table> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml index 17fbda15137b..52acff193a6f 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml @@ -116,7 +116,7 @@ this ioctl.</para> <colspec colname="c4" /> <tbody valign="top"> <row> - <entry>&v4l2-buf-type;</entry> + <entry>__u32</entry> <entry><structfield>type</structfield></entry> <entry></entry> <entry>Type of the data stream, see <xref diff --git a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml index 66e9a5257861..69c178a4d205 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml @@ -95,14 +95,14 @@ the &v4l2-output; <structfield>modulator</structfield> field and the &v4l2-modulator; <structfield>index</structfield> field.</entry> </row> <row> - <entry>&v4l2-tuner-type;</entry> + <entry>__u32</entry> <entry><structfield>type</structfield></entry> <entry>The tuner type. This is the same value as in the -&v4l2-tuner; <structfield>type</structfield> field. The type must be set +&v4l2-tuner; <structfield>type</structfield> field. See The type must be set to <constant>V4L2_TUNER_RADIO</constant> for <filename>/dev/radioX</filename> device nodes, and to <constant>V4L2_TUNER_ANALOG_TV</constant> for all others. The field is not applicable to modulators, &ie; ignored -by drivers.</entry> +by drivers. See <xref linkend="v4l2-tuner-type" /></entry> </row> <row> <entry>__u32</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml index 19b1d85dd668..f83d2cdd1185 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml @@ -75,11 +75,12 @@ devices.</para> &cs-ustr; <tbody valign="top"> <row> - <entry>&v4l2-buf-type;</entry> + <entry>__u32</entry> <entry><structfield>type</structfield></entry> <entry></entry> <entry>The buffer (stream) type, same as &v4l2-format; -<structfield>type</structfield>, set by the application.</entry> +<structfield>type</structfield>, set by the application. See <xref + linkend="v4l2-buf-type" /></entry> </row> <row> <entry>union</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-sliced-vbi-cap.xml b/Documentation/DocBook/media/v4l/vidioc-g-sliced-vbi-cap.xml index 71741daaf725..bd015d1563ff 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-sliced-vbi-cap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-sliced-vbi-cap.xml @@ -148,7 +148,7 @@ using the &VIDIOC-S-FMT; ioctl as described in <xref <structfield>service_lines</structfield>[1][0] to zero.</entry> </row> <row> - <entry>&v4l2-buf-type;</entry> + <entry>__u32</entry> <entry><structfield>type</structfield></entry> <entry>Type of the data stream, see <xref linkend="v4l2-buf-type" />. Should be diff --git a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml index 91ec2fb658f8..62a1aa200a36 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml @@ -107,7 +107,7 @@ user.<!-- FIXME Video inputs already have a name, the purpose of this field is not quite clear.--></para></entry> </row> <row> - <entry>&v4l2-tuner-type;</entry> + <entry>__u32</entry> <entry><structfield>type</structfield></entry> <entry spanname="hspan">Type of the tuner, see <xref linkend="v4l2-tuner-type" />.</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml b/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml index 7bde698760e4..fa7ad7e33228 100644 --- a/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml @@ -48,6 +48,12 @@ <refsect1> <title>Description</title> + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental"> experimental </link> + interface and may change in the future.</para> + </note> + <para>Applications can optionally call the <constant>VIDIOC_PREPARE_BUF</constant> ioctl to pass ownership of the buffer to the driver before actually enqueuing it, using the diff --git a/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml index 23b17f604211..1bc8aeb3ff1f 100644 --- a/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml +++ b/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml @@ -49,6 +49,10 @@ input</refpurpose> <refsect1> <title>Description</title> + <para>This ioctl is <emphasis role="bold">deprecated</emphasis>. + New drivers and applications should use &VIDIOC-QUERY-DV-TIMINGS; instead. + </para> + <para>The hardware may be able to detect the current DV preset automatically, similar to sensing the video standard. To do so, applications call <constant> VIDIOC_QUERY_DV_PRESET</constant> with a pointer to a diff --git a/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml new file mode 100644 index 000000000000..44935a0ffcf0 --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml @@ -0,0 +1,104 @@ +<refentry id="vidioc-query-dv-timings"> + <refmeta> + <refentrytitle>ioctl VIDIOC_QUERY_DV_TIMINGS</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_QUERY_DV_TIMINGS</refname> + <refpurpose>Sense the DV preset received by the current +input</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_dv_timings *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_QUERY_DV_TIMINGS</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental"> experimental </link> + interface and may change in the future.</para> + </note> + + <para>The hardware may be able to detect the current DV timings +automatically, similar to sensing the video standard. To do so, applications +call <constant>VIDIOC_QUERY_DV_TIMINGS</constant> with a pointer to a +&v4l2-dv-timings;. Once the hardware detects the timings, it will fill in the +timings structure. + +If the timings could not be detected because there was no signal, then +<errorcode>ENOLINK</errorcode> is returned. If a signal was detected, but +it was unstable and the receiver could not lock to the signal, then +<errorcode>ENOLCK</errorcode> is returned. If the receiver could lock to the signal, +but the format is unsupported (e.g. because the pixelclock is out of range +of the hardware capabilities), then the driver fills in whatever timings it +could find and returns <errorcode>ERANGE</errorcode>. In that case the application +can call &VIDIOC-DV-TIMINGS-CAP; to compare the found timings with the hardware's +capabilities in order to give more precise feedback to the user. +</para> + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>ENOLINK</errorcode></term> + <listitem> + <para>No timings could be detected because no signal was found. +</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ENOLCK</errorcode></term> + <listitem> + <para>The signal was unstable and the hardware could not lock on to it. +</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ERANGE</errorcode></term> + <listitem> + <para>Timings were found, but they are out of range of the hardware +capabilities. +</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml index 36660d311b51..e6645b996558 100644 --- a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml +++ b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml @@ -127,7 +127,7 @@ the first control with a higher ID. Drivers which do not support this flag yet always return an &EINVAL;.</entry> </row> <row> - <entry>&v4l2-ctrl-type;</entry> + <entry>__u32</entry> <entry><structfield>type</structfield></entry> <entry>Type of control, see <xref linkend="v4l2-ctrl-type" />.</entry> @@ -215,11 +215,12 @@ the array to zero.</entry> <table pgwide="1" frame="none" id="v4l2-querymenu"> <title>struct <structname>v4l2_querymenu</structname></title> - <tgroup cols="3"> + <tgroup cols="4"> &cs-str; <tbody valign="top"> <row> <entry>__u32</entry> + <entry></entry> <entry><structfield>id</structfield></entry> <entry>Identifies the control, set by the application from the respective &v4l2-queryctrl; @@ -227,18 +228,38 @@ from the respective &v4l2-queryctrl; </row> <row> <entry>__u32</entry> + <entry></entry> <entry><structfield>index</structfield></entry> <entry>Index of the menu item, starting at zero, set by the application.</entry> </row> <row> + <entry>union</entry> + <entry></entry> + <entry></entry> + <entry></entry> + </row> + <row> + <entry></entry> <entry>__u8</entry> <entry><structfield>name</structfield>[32]</entry> <entry>Name of the menu item, a NUL-terminated ASCII -string. This information is intended for the user.</entry> +string. This information is intended for the user. This field is valid +for <constant>V4L2_CTRL_FLAG_MENU</constant> type controls.</entry> + </row> + <row> + <entry></entry> + <entry>__s64</entry> + <entry><structfield>value</structfield></entry> + <entry> + Value of the integer menu item. This field is valid for + <constant>V4L2_CTRL_FLAG_INTEGER_MENU</constant> type + controls. + </entry> </row> <row> <entry>__u32</entry> + <entry></entry> <entry><structfield>reserved</structfield></entry> <entry>Reserved for future extensions. Drivers must set the array to zero.</entry> @@ -292,6 +313,20 @@ the menu items can be enumerated with the <constant>VIDIOC_QUERYMENU</constant> ioctl.</entry> </row> <row> + <entry><constant>V4L2_CTRL_TYPE_INTEGER_MENU</constant></entry> + <entry>≥ 0</entry> + <entry>1</entry> + <entry>N-1</entry> + <entry> + The control has a menu of N choices. The values of the + menu items can be enumerated with the + <constant>VIDIOC_QUERYMENU</constant> ioctl. This is + similar to <constant>V4L2_CTRL_TYPE_MENU</constant> + except that instead of strings, the menu items are + signed 64-bit integers. + </entry> + </row> + <row> <entry><constant>V4L2_CTRL_TYPE_BITMASK</constant></entry> <entry>0</entry> <entry>n/a</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml index 7be4b1d29b90..d7c95057bc51 100644 --- a/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml +++ b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml @@ -92,18 +92,19 @@ streamoff.--></para> <entry>The number of buffers requested or granted.</entry> </row> <row> - <entry>&v4l2-buf-type;</entry> + <entry>__u32</entry> <entry><structfield>type</structfield></entry> <entry>Type of the stream or buffers, this is the same as the &v4l2-format; <structfield>type</structfield> field. See <xref linkend="v4l2-buf-type" /> for valid values.</entry> </row> <row> - <entry>&v4l2-memory;</entry> + <entry>__u32</entry> <entry><structfield>memory</structfield></entry> <entry>Applications set this field to <constant>V4L2_MEMORY_MMAP</constant> or -<constant>V4L2_MEMORY_USERPTR</constant>.</entry> +<constant>V4L2_MEMORY_USERPTR</constant>. See <xref linkend="v4l2-memory" +/>.</entry> </row> <row> <entry>__u32</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml index 18b1a8266f7c..407dfceb71f0 100644 --- a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml +++ b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml @@ -73,10 +73,11 @@ same value as in the &v4l2-input; <structfield>tuner</structfield> field and the &v4l2-tuner; <structfield>index</structfield> field.</entry> </row> <row> - <entry>&v4l2-tuner-type;</entry> + <entry>__u32</entry> <entry><structfield>type</structfield></entry> <entry>The tuner type. This is the same value as in the -&v4l2-tuner; <structfield>type</structfield> field.</entry> +&v4l2-tuner; <structfield>type</structfield> field. See <xref + linkend="v4l2-tuner-type" /></entry> </row> <row> <entry>__u32</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-crop.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-crop.xml index 06197323a8cc..4cddd788c589 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-crop.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-crop.xml @@ -58,9 +58,12 @@ <title>Description</title> <note> - <title>Experimental</title> - <para>This is an <link linkend="experimental">experimental</link> - interface and may change in the future.</para> + <title>Obsolete</title> + + <para>This is an <link linkend="obsolete">obsolete</link> + interface and may be removed in the future. It is superseded by + <link linkend="vidioc-subdev-g-selection">the selection + API</link>.</para> </note> <para>To retrieve the current crop rectangle applications set the diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml new file mode 100644 index 000000000000..208e9f0da3f3 --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml @@ -0,0 +1,228 @@ +<refentry id="vidioc-subdev-g-selection"> + <refmeta> + <refentrytitle>ioctl VIDIOC_SUBDEV_G_SELECTION, VIDIOC_SUBDEV_S_SELECTION</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_SUBDEV_G_SELECTION</refname> + <refname>VIDIOC_SUBDEV_S_SELECTION</refname> + <refpurpose>Get or set selection rectangles on a subdev pad</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_subdev_selection *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_SUBDEV_G_SELECTION, VIDIOC_SUBDEV_S_SELECTION</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental">experimental</link> + interface and may change in the future.</para> + </note> + + <para>The selections are used to configure various image + processing functionality performed by the subdevs which affect the + image size. This currently includes cropping, scaling and + composition.</para> + + <para>The selection API replaces <link + linkend="vidioc-subdev-g-crop">the old subdev crop API</link>. All + the function of the crop API, and more, are supported by the + selections API.</para> + + <para>See <xref linkend="subdev"></xref> for + more information on how each selection target affects the image + processing pipeline inside the subdevice.</para> + + <section> + <title>Types of selection targets</title> + + <para>There are two types of selection targets: actual and bounds. + The ACTUAL targets are the targets which configure the hardware. + The BOUNDS target will return a rectangle that contain all + possible ACTUAL rectangles.</para> + </section> + + <section> + <title>Discovering supported features</title> + + <para>To discover which targets are supported, the user can + perform <constant>VIDIOC_SUBDEV_G_SELECTION</constant> on them. + Any unsupported target will return + <constant>EINVAL</constant>.</para> + </section> + + <table pgwide="1" frame="none" id="v4l2-subdev-selection-targets"> + <title>V4L2 subdev selection targets</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL</constant></entry> + <entry>0x0000</entry> + <entry>Actual crop. Defines the cropping + performed by the processing step.</entry> + </row> + <row> + <entry><constant>V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS</constant></entry> + <entry>0x0002</entry> + <entry>Bounds of the crop rectangle.</entry> + </row> + <row> + <entry><constant>V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL</constant></entry> + <entry>0x0100</entry> + <entry>Actual compose rectangle. Used to configure scaling + on sink pads and composition on source pads.</entry> + </row> + <row> + <entry><constant>V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS</constant></entry> + <entry>0x0102</entry> + <entry>Bounds of the compose rectangle.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="v4l2-subdev-selection-flags"> + <title>V4L2 subdev selection flags</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>V4L2_SUBDEV_SEL_FLAG_SIZE_GE</constant></entry> + <entry>(1 << 0)</entry> <entry>Suggest the driver it + should choose greater or equal rectangle (in size) than + was requested. Albeit the driver may choose a lesser size, + it will only do so due to hardware limitations. Without + this flag (and + <constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant>) the + behaviour is to choose the closest possible + rectangle.</entry> + </row> + <row> + <entry><constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant></entry> + <entry>(1 << 1)</entry> <entry>Suggest the driver it + should choose lesser or equal rectangle (in size) than was + requested. Albeit the driver may choose a greater size, it + will only do so due to hardware limitations.</entry> + </row> + <row> + <entry><constant>V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG</constant></entry> + <entry>(1 << 2)</entry> + <entry>The configuration should not be propagated to any + further processing steps. If this flag is not given, the + configuration is propagated inside the subdevice to all + further processing steps.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="v4l2-subdev-selection"> + <title>struct <structname>v4l2_subdev_selection</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>which</structfield></entry> + <entry>Active or try selection, from + &v4l2-subdev-format-whence;.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>pad</structfield></entry> + <entry>Pad number as reported by the media framework.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>target</structfield></entry> + <entry>Target selection rectangle. See + <xref linkend="v4l2-subdev-selection-targets">.</xref>.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>flags</structfield></entry> + <entry>Flags. See + <xref linkend="v4l2-subdev-selection-flags">.</xref></entry> + </row> + <row> + <entry>&v4l2-rect;</entry> + <entry><structfield>rect</structfield></entry> + <entry>Selection rectangle, in pixels.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[8]</entry> + <entry>Reserved for future extensions. Applications and drivers must + set the array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>EBUSY</errorcode></term> + <listitem> + <para>The selection rectangle can't be changed because the + pad is currently busy. This can be caused, for instance, by + an active video stream on the pad. The ioctl must not be + retried without performing another action to fix the problem + first. Only returned by + <constant>VIDIOC_SUBDEV_S_SELECTION</constant></para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The &v4l2-subdev-selection; + <structfield>pad</structfield> references a non-existing + pad, the <structfield>which</structfield> field references a + non-existing format, or the selection target is not + supported on the given subdev pad.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt index 28a9af953b9d..57aae7765c74 100644 --- a/Documentation/arm/SPEAr/overview.txt +++ b/Documentation/arm/SPEAr/overview.txt @@ -8,9 +8,8 @@ Introduction weblink : http://www.st.com/spear The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are - supported by the 'spear' platform of ARM Linux. Currently SPEAr300, - SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX - series is in progress. + supported by the 'spear' platform of ARM Linux. Currently SPEAr1310, + SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Hierarchy in SPEAr is as follows: @@ -26,33 +25,36 @@ Introduction - SPEAr600 (SOC) - SPEAr600 Evaluation Board - SPEAr13XX (13XX SOC series, based on ARM CORTEXA9) - - SPEAr1300 (SOC) + - SPEAr1310 (SOC) + - SPEAr1310 Evaluation Board + - SPEAr1340 (SOC) + - SPEAr1340 Evaluation Board Configuration ------------- A generic configuration is provided for each machine, and can be used as the default by - make spear600_defconfig - make spear300_defconfig - make spear310_defconfig - make spear320_defconfig + make spear13xx_defconfig + make spear3xx_defconfig + make spear6xx_defconfig Layout ------ - The common files for multiple machine families (SPEAr3XX, SPEAr6XX and - SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear + The common files for multiple machine families (SPEAr3xx, SPEAr6xx and + SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear with headers in plat/. Each machine series have a directory with name arch/arm/mach-spear followed by series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx. - Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for - spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine - specific files, like spear300.c, spear310.c, spear320.c and spear600.c. - mach-spear* doesn't contains board specific files as they fully support - Flattened Device Tree. + Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for + spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is + mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific + files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and + spear600.c. mach-spear* doesn't contains board specific files as they fully + support Flattened Device Tree. Document Author diff --git a/Documentation/cris/README b/Documentation/cris/README index d9b086869a60..8dbdb1a44429 100644 --- a/Documentation/cris/README +++ b/Documentation/cris/README @@ -1,38 +1,34 @@ -Linux 2.4 on the CRIS architecture -================================== -$Id: README,v 1.7 2001/04/19 12:38:32 bjornw Exp $ +Linux on the CRIS architecture +============================== -This is a port of Linux 2.4 to Axis Communications ETRAX 100LX embedded -network CPU. For more information about CRIS and ETRAX please see further -below. +This is a port of Linux to Axis Communications ETRAX 100LX, +ETRAX FS and ARTPEC-3 embedded network CPUs. + +For more information about CRIS and ETRAX please see further below. In order to compile this you need a version of gcc with support for the -ETRAX chip family. Please see this link for more information on how to +ETRAX chip family. Please see this link for more information on how to download the compiler and other tools useful when building and booting software for the ETRAX platform: -http://developer.axis.com/doc/software/devboard_lx/install-howto.html - -<more specific information should come in this document later> +http://developer.axis.com/wiki/doku.php?id=axis:install-howto-2_20 What is CRIS ? -------------- CRIS is an acronym for 'Code Reduced Instruction Set'. It is the CPU architecture in Axis Communication AB's range of embedded network CPU's, -called ETRAX. The latest CPU is called ETRAX 100LX, where LX stands for -'Linux' because the chip was designed to be a good host for the Linux -operating system. +called ETRAX. The ETRAX 100LX chip -------------------- -For reference, please see the press-release: +For reference, please see the following link: -http://www.axis.com/news/us/001101_etrax.htm +http://www.axis.com/products/dev_etrax_100lx/index.htm -The ETRAX 100LX is a 100 MIPS processor with 8kB cache, MMU, and a very broad -range of built-in interfaces, all with modern scatter/gather DMA. +The ETRAX 100LX is a 100 MIPS processor with 8kB cache, MMU, and a very broad +range of built-in interfaces, all with modern scatter/gather DMA. Memory interfaces: @@ -51,20 +47,28 @@ I/O interfaces: * SCSI * two parallel-ports * two generic 8-bit ports - - (not all interfaces are available at the same time due to chip pin + + (not all interfaces are available at the same time due to chip pin multiplexing) -The previous version of the ETRAX, the ETRAX 100, sits in almost all of -Axis shipping thin-servers like the Axis 2100 web camera or the ETRAX 100 -developer-board. It lacks an MMU so the Linux we run on that is a version -of uClinux (Linux 2.0 without MM-support) ported to the CRIS architecture. -The new Linux 2.4 port has full MM and needs a CPU with an MMU, so it will -not run on the ETRAX 100. +ETRAX 100LX is CRISv10 architecture. + + +The ETRAX FS and ARTPEC-3 chips +------------------------------- -A version of the Axis developer-board with ETRAX 100LX (running Linux -2.4) is now available. For more information please see developer.axis.com. +The ETRAX FS is a 200MHz 32-bit RISC processor with on-chip 16kB +I-cache and 16kB D-cache and with a wide range of device interfaces +including multiple high speed serial ports and an integrated USB 1.1 PHY. +The ARTPEC-3 is a variant of the ETRAX FS with additional IO-units +used by the Axis Communications network cameras. + +See below link for more information: + +http://www.axis.com/products/dev_etrax_fs/index.htm + +ETRAX FS and ARTPEC-3 are both CRISv32 architectures. Bootlog ------- @@ -182,10 +186,6 @@ SwapFree: 0 kB -rwxr-xr-x 1 342 100 16252 Jan 01 00:00 telnetd -(All programs are statically linked to the libc at this point - we have not ported the - shared libraries yet) - - diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 5941f5136c6b..47a154f30290 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -847,13 +847,7 @@ Your cooperation is appreciated. ... 31 = /dev/tap15 16th Ethertap device - 36 block MCA ESDI hard disk - 0 = /dev/eda First ESDI disk whole disk - 64 = /dev/edb Second ESDI disk whole disk - ... - - Partitions are handled in the same way as IDE disks - (see major number 3). + 36 block OBSOLETE (was MCA ESDI hard disk) 37 char IDE tape 0 = /dev/ht0 First IDE tape diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index bfbc771a65f8..ac9e7516756e 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -1,6 +1,14 @@ Freescale i.MX Platforms Device Tree Bindings ----------------------------------------------- +i.MX23 Evaluation Kit +Required root node properties: + - compatible = "fsl,imx23-evk", "fsl,imx23"; + +i.MX28 Evaluation Kit +Required root node properties: + - compatible = "fsl,imx28-evk", "fsl,imx28"; + i.MX51 Babbage Board Required root node properties: - compatible = "fsl,imx51-babbage", "fsl,imx51"; @@ -29,6 +37,10 @@ i.MX6 Quad SABRE Lite Board Required root node properties: - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; +i.MX6 Quad SABRE Smart Device Board +Required root node properties: + - compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; + Generic i.MX boards ------------------- diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt index 9b4b82a721b6..62eb8df1e08d 100644 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ b/Documentation/devicetree/bindings/arm/gic.txt @@ -11,7 +11,9 @@ have PPIs or SGIs. Main node required properties: - compatible : should be one of: + "arm,cortex-a15-gic" "arm,cortex-a9-gic" + "arm,cortex-a7-gic" "arm,arm11mp-gic" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an @@ -39,8 +41,9 @@ Main node required properties: the GIC cpu interface register base and size. Optional -- interrupts : Interrupt source of the parent interrupt controller. Only - present on secondary GICs. +- interrupts : Interrupt source of the parent interrupt controller on + secondary GICs, or VGIC maintainance interrupt on primary GIC (see + below). - cpu-offset : per-cpu offset within the distributor and cpu interface regions, used when the GIC doesn't have banked registers. The offset is @@ -57,3 +60,31 @@ Example: <0xfff10100 0x100>; }; + +* GIC virtualization extensions (VGIC) + +For ARM cores that support the virtualization extensions, additional +properties must be described (they only exist if the GIC is the +primary interrupt controller). + +Required properties: + +- reg : Additional regions specifying the base physical address and + size of the VGIC registers. The first additional region is the GIC + virtual interface control register base and size. The 2nd additional + region is the GIC virtual cpu interface register base and size. + +- interrupts : VGIC maintainance interrupt. + +Example: + + interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c002000 0x1000>, + <0x2c004000 0x2000>, + <0x2c006000 0x2000>; + interrupts = <1 9 0xf04>; + }; diff --git a/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt new file mode 100644 index 000000000000..f2f2171e530e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt @@ -0,0 +1,52 @@ +* Samsung Exynos Interrupt Combiner Controller + +Samsung's Exynos4 architecture includes a interrupt combiner controller which +can combine interrupt sources as a group and provide a single interrupt request +for the group. The interrupt request from each group are connected to a parent +interrupt controller, such as GIC in case of Exynos4210. + +The interrupt combiner controller consists of multiple combiners. Upto eight +interrupt sources can be connected to a combiner. The combiner outputs one +combined interrupt for its eight interrupt sources. The combined interrupt +is usually connected to a parent interrupt controller. + +A single node in the device tree is used to describe the interrupt combiner +controller module (which includes multiple combiners). A combiner in the +interrupt controller module shares config/control registers with other +combiners. For example, a 32-bit interrupt enable/disable config register +can accommodate upto 4 interrupt combiners (with each combiner supporting +upto 8 interrupt sources). + +Required properties: +- compatible: should be "samsung,exynos4210-combiner". +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: should be <2>. The meaning of the cells are + * First Cell: Combiner Group Number. + * Second Cell: Interrupt number within the group. +- reg: Base address and size of interrupt combiner registers. +- interrupts: The list of interrupts generated by the combiners which are then + connected to a parent interrupt controller. The format of the interrupt + specifier depends in the interrupt parent controller. + +Optional properties: +- samsung,combiner-nr: The number of interrupt combiners supported. If this + property is not specified, the default number of combiners is assumed + to be 16. +- interrupt-parent: pHandle of the parent interrupt controller, if not + inherited from the parent node. + + +Example: + + The following is a an example from the Exynos4210 SoC dtsi file. + + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; diff --git a/Documentation/devicetree/bindings/arm/spear-timer.txt b/Documentation/devicetree/bindings/arm/spear-timer.txt new file mode 100644 index 000000000000..c0017221cf55 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/spear-timer.txt @@ -0,0 +1,18 @@ +* SPEAr ARM Timer + +** Timer node required properties: + +- compatible : Should be: + "st,spear-timer" +- reg: Address range of the timer registers +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupt: Should contain the timer interrupt number + +Example: + + timer@f0000000 { + compatible = "st,spear-timer"; + reg = <0xf0000000 0x400>; + interrupts = <2>; + }; diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt index aa5f355cc947..0d42949df6c2 100644 --- a/Documentation/devicetree/bindings/arm/spear.txt +++ b/Documentation/devicetree/bindings/arm/spear.txt @@ -2,25 +2,25 @@ ST SPEAr Platforms Device Tree Bindings --------------------------------------- Boards with the ST SPEAr600 SoC shall have the following properties: - Required root node property: - compatible = "st,spear600"; Boards with the ST SPEAr300 SoC shall have the following properties: - Required root node property: - compatible = "st,spear300"; Boards with the ST SPEAr310 SoC shall have the following properties: - Required root node property: - compatible = "st,spear310"; Boards with the ST SPEAr320 SoC shall have the following properties: +Required root node property: +compatible = "st,spear320"; +Boards with the ST SPEAr1310 SoC shall have the following properties: Required root node property: +compatible = "st,spear1310"; -compatible = "st,spear320"; +Boards with the ST SPEAr1340 SoC shall have the following properties: +Required root node property: +compatible = "st,spear1340"; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt new file mode 100644 index 000000000000..234406d41c12 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt @@ -0,0 +1,11 @@ +NVIDIA Tegra AHB + +Required properties: +- compatible : "nvidia,tegra20-ahb" or "nvidia,tegra30-ahb" +- reg : Should contain 1 register ranges(address and length) + +Example: + ahb: ahb@6000c004 { + compatible = "nvidia,tegra20-ahb"; + reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ + }; diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt new file mode 100644 index 000000000000..ded0398d3bdc --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt @@ -0,0 +1,19 @@ +* Freescale MXS DMA + +Required properties: +- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx" +- reg : Should contain registers location and length + +Supported chips: +imx23, imx28. + +Examples: +dma-apbh@80004000 { + compatible = "fsl,imx28-dma-apbh"; + reg = <0x80004000 2000>; +}; + +dma-apbx@80024000 { + compatible = "fsl,imx28-dma-apbx"; + reg = <0x80024000 2000>; +}; diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt new file mode 100644 index 000000000000..c0d85dbcada5 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt @@ -0,0 +1,17 @@ +* Synopsys Designware DMA Controller + +Required properties: +- compatible: "snps,dma-spear1340" +- reg: Address range of the DMAC registers +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupt: Should contain the DMAC interrupt number + +Example: + + dma@fc000000 { + compatible = "snps,dma-spear1340"; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt new file mode 100644 index 000000000000..0c35673f7a3e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt @@ -0,0 +1,87 @@ +* Freescale MXS GPIO controller + +The Freescale MXS GPIO controller is part of MXS PIN controller. The +GPIOs are organized in port/bank. Each port consists of 32 GPIOs. + +As the GPIO controller is embedded in the PIN controller and all the +GPIO ports share the same IO space with PIN controller, the GPIO node +will be represented as sub-nodes of MXS pinctrl node. + +Required properties for GPIO node: +- compatible : Should be "fsl,<soc>-gpio". The supported SoCs include + imx23 and imx28. +- interrupts : Should be the port interrupt shared by all 32 pins. +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify optional parameters (currently + unused). +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells : Should be 2. The first cell is the GPIO number. + The second cell bits[3:0] is used to specify trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + +Note: Each GPIO port should have an alias correctly numbered in "aliases" +node. + +Examples: + +aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; +}; + +pinctrl@80018000 { + compatible = "fsl,imx28-pinctrl", "simple-bus"; + reg = <0x80018000 2000>; + + gpio0: gpio@0 { + compatible = "fsl,imx28-gpio"; + interrupts = <127>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1 { + compatible = "fsl,imx28-gpio"; + interrupts = <126>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2 { + compatible = "fsl,imx28-gpio"; + interrupts = <125>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@3 { + compatible = "fsl,imx28-gpio"; + interrupts = <124>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@4 { + compatible = "fsl,imx28-gpio"; + interrupts = <123>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt b/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt new file mode 100644 index 000000000000..49819367a011 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt @@ -0,0 +1,43 @@ +NXP LPC32xx SoC GPIO controller + +Required properties: +- compatible: must be "nxp,lpc3220-gpio" +- reg: Physical base address and length of the controller's registers. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Should be 3: + 1) bank: + 0: GPIO P0 + 1: GPIO P1 + 2: GPIO P2 + 3: GPIO P3 + 4: GPI P3 + 5: GPO P3 + 2) pin number + 3) optional parameters: + - bit 0 specifies polarity (0 for normal, 1 for inverted) +- reg: Index of the GPIO group + +Example: + + gpio: gpio@40028000 { + compatible = "nxp,lpc3220-gpio"; + reg = <0x40028000 0x1000>; + gpio-controller; + #gpio-cells = <3>; /* bank, pin, flags */ + }; + + leds { + compatible = "gpio-leds"; + + led0 { + gpios = <&gpio 5 1 1>; /* GPO_P3 1, active low */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led1 { + gpios = <&gpio 5 14 1>; /* GPO_P3 14, active low */ + linux,default-trigger = "timer"; + default-state = "off"; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt new file mode 100644 index 000000000000..1bfc02de1b0c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt @@ -0,0 +1,16 @@ +* Freescale MXS Inter IC (I2C) Controller + +Required properties: +- compatible: Should be "fsl,<chip>-i2c" +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts + +Examples: + +i2c0: i2c@80058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-i2c"; + reg = <0x80058000 2000>; + interrupts = <111 68>; +}; diff --git a/Documentation/devicetree/bindings/i2c/mux.txt b/Documentation/devicetree/bindings/i2c/mux.txt new file mode 100644 index 000000000000..af84cce5cd7b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/mux.txt @@ -0,0 +1,60 @@ +Common i2c bus multiplexer/switch properties. + +An i2c bus multiplexer/switch will have several child busses that are +numbered uniquely in a device dependent manner. The nodes for an i2c bus +multiplexer/switch will have one child node for each child +bus. + +Required properties: +- #address-cells = <1>; +- #size-cells = <0>; + +Required properties for child nodes: +- #address-cells = <1>; +- #size-cells = <0>; +- reg : The sub-bus number. + +Optional properties for child nodes: +- Other properties specific to the multiplexer/switch hardware. +- Child nodes conforming to i2c bus binding + + +Example : + + /* + An NXP pca9548 8 channel I2C multiplexer at address 0x70 + with two NXP pca8574 GPIO expanders attached, one each to + ports 3 and 4. + */ + + mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + gpio1: gpio@38 { + compatible = "nxp,pca8574"; + reg = <0x38>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + gpio2: gpio@38 { + compatible = "nxp,pca8574"; + reg = <0x38>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt index 38832c712919..b6cb5a12c672 100644 --- a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt @@ -6,14 +6,18 @@ Required properties: - compatible: value should be either of the following. (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c. (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c. + (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used + inside HDMIPHY block found on several samsung SoCs - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges. - - gpios: The order of the gpios should be the following: <SDA, SCL>. - The gpio specifier depends on the gpio controller. Optional properties: + - gpios: The order of the gpios should be the following: <SDA, SCL>. + The gpio specifier depends on the gpio controller. Required in all + cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output + lines are permanently wired to the respective client - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not specified, default value is 0. - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not diff --git a/Documentation/devicetree/bindings/i2c/xiic.txt b/Documentation/devicetree/bindings/i2c/xiic.txt new file mode 100644 index 000000000000..ceabbe91ae44 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/xiic.txt @@ -0,0 +1,22 @@ +Xilinx IIC controller: + +Required properties: +- compatible : Must be "xlnx,xps-iic-2.00.a" +- reg : IIC register location and length +- interrupts : IIC controller unterrupt +- #address-cells = <1> +- #size-cells = <0> + +Optional properties: +- Child nodes conforming to i2c bus binding + +Example: + + axi_iic_0: i2c@40800000 { + compatible = "xlnx,xps-iic-2.00.a"; + interrupts = < 1 2 >; + reg = < 0x40800000 0x10000 >; + + #size-cells = <0>; + #address-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/input/spear-keyboard.txt b/Documentation/devicetree/bindings/input/spear-keyboard.txt new file mode 100644 index 000000000000..4a846d26da23 --- /dev/null +++ b/Documentation/devicetree/bindings/input/spear-keyboard.txt @@ -0,0 +1,20 @@ +* SPEAr keyboard controller + +Required properties: +- compatible: "st,spear300-kbd" + +Optional properties, in addition to those specified by the shared +matrix-keyboard bindings: +- autorepeat: bool: enables key autorepeat +- st,mode: keyboard mode: 0 - 9x9, 1 - 6x6, 2 - 2x2 + +Example: + +kbd@fc400000 { + compatible = "st,spear300-kbd"; + reg = <0xfc400000 0x100>; + linux,keymap = < 0x00030012 + 0x0102003a >; + autorepeat; + st,mode = <0>; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt new file mode 100644 index 000000000000..41cbf4b7a670 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt @@ -0,0 +1,16 @@ +* NXP LPC32xx SoC Touchscreen Controller (TSC) + +Required properties: +- compatible: must be "nxp,lpc3220-tsc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The TSC/ADC interrupt + +Example: + + tsc@40048000 { + compatible = "nxp,lpc3220-tsc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <39 0>; + }; diff --git a/Documentation/devicetree/bindings/input/twl6040-vibra.txt b/Documentation/devicetree/bindings/input/twl6040-vibra.txt new file mode 100644 index 000000000000..5b1918b818fb --- /dev/null +++ b/Documentation/devicetree/bindings/input/twl6040-vibra.txt @@ -0,0 +1,37 @@ +Vibra driver for the twl6040 family + +The vibra driver is a child of the twl6040 MFD dirver. +Documentation/devicetree/bindings/mfd/twl6040.txt + +Required properties: +- compatible : Must be "ti,twl6040-vibra"; +- interrupts: 4, Vibra overcurrent interrupt +- vddvibl-supply: Regulator supplying the left vibra motor +- vddvibr-supply: Regulator supplying the right vibra motor +- vibldrv_res: Board specific left driver resistance +- vibrdrv_res: Board specific right driver resistance +- viblmotor_res: Board specific left motor resistance +- vibrmotor_res: Board specific right motor resistance + +Optional properties: +- vddvibl_uV: If the vddvibl default voltage need to be changed +- vddvibr_uV: If the vddvibr default voltage need to be changed + +Example: +/* + * 8-channel high quality low-power audio codec + * http://www.ti.com/lit/ds/symlink/twl6040.pdf + */ +twl6040: twl6040@4b { + ... + twl6040_vibra: twl6040@1 { + compatible = "ti,twl6040-vibra"; + interrupts = <4>; + vddvibl-supply = <&vbat>; + vddvibr-supply = <&vbat>; + vibldrv_res = <8>; + vibrdrv_res = <3>; + viblmotor_res = <10>; + vibrmotor_res = <10>; + }; +}; diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt index 64bcb8be973c..0d93b4b0e0e3 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt @@ -11,9 +11,11 @@ Required properties: - interrupt-parent : interrupt source phandle. - clock-frequency : specifies eSDHC base clock frequency. - sdhci,wp-inverted : (optional) specifies that eSDHC controller - reports inverted write-protect state; + reports inverted write-protect state; New devices should use + the generic "wp-inverted" property. - sdhci,1-bit-only : (optional) specifies that a controller can - only handle 1-bit data transfers. + only handle 1-bit data transfers. New devices should use the + generic "bus-width = <1>" property. - sdhci,auto-cmd12: (optional) specifies that a controller can only handle auto CMD12. diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index ab22fe6e73ab..c7e404b3ef05 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -9,7 +9,7 @@ Required properties: - interrupts : Should contain eSDHC interrupt Optional properties: -- fsl,card-wired : Indicate the card is wired to host permanently +- non-removable : Indicate the card is wired to host permanently - fsl,cd-internal : Indicate to use controller internal card detection - fsl,wp-internal : Indicate to use controller internal write protection - cd-gpios : Specify GPIOs for card detection diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt index 89a0084df2f7..d64aea5a4203 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt @@ -10,7 +10,8 @@ Required properties: Optional properties: - gpios : may specify GPIOs in this order: Card-Detect GPIO, - Write-Protect GPIO. + Write-Protect GPIO. Note that this does not follow the + binding from mmc.txt, for historic reasons. - interrupts : the interrupt of a card detect interrupt. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt new file mode 100644 index 000000000000..6e70dcde0a71 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -0,0 +1,27 @@ +These properties are common to multiple MMC host controllers. Any host +that requires the respective functionality should implement them using +these definitions. + +Required properties: +- bus-width: Number of data lines, can be <1>, <4>, or <8> + +Optional properties: +- cd-gpios : Specify GPIOs for card detection, see gpio binding +- wp-gpios : Specify GPIOs for write protection, see gpio binding +- cd-inverted: when present, polarity on the wp gpio line is inverted +- wp-inverted: when present, polarity on the wp gpio line is inverted +- non-removable: non-removable slot (like eMMC) +- max-frequency: maximum operating clock frequency + +Example: + +sdhci@ab000000 { + compatible = "sdhci"; + reg = <0xab000000 0x200>; + interrupts = <23>; + bus-width = <4>; + cd-gpios = <&gpio 69 0>; + cd-inverted; + wp-gpios = <&gpio 70 0>; + max-frequency = <50000000>; +} diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt new file mode 100644 index 000000000000..14a81d526118 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmci.txt @@ -0,0 +1,19 @@ +* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1 + +The ARM PrimeCell MMCI PL180 and PL181 provides and interface for +reading and writing to MultiMedia and SD cards alike. + +Required properties: +- compatible : contains "arm,pl18x", "arm,primecell". +- reg : contains pl18x registers and length. +- interrupts : contains the device IRQ(s). +- arm,primecell-periphid : contains the PrimeCell Peripheral ID. + +Optional properties: +- wp-gpios : contains any write protect (ro) gpios +- cd-gpios : contains any card detection gpios +- cd-inverted : indicates whether the cd gpio is inverted +- max-frequency : contains the maximum operating frequency +- bus-width : number of data lines, can be <1>, <4>, or <8> +- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable +- mmc-cap-sd-highspeed : indicates whether SD is high speed capable diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt new file mode 100644 index 000000000000..14d870a9e3db --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt @@ -0,0 +1,25 @@ +* Freescale MXS MMC controller + +The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller +to support MMC, SD, and SDIO types of memory cards. + +Required properties: +- compatible: Should be "fsl,<chip>-mmc". The supported chips include + imx23 and imx28. +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts +- fsl,ssp-dma-channel: APBH DMA channel for the SSP +- bus-width: Number of data lines, can be <1>, <4>, or <8> + +Optional properties: +- wp-gpios: Specify GPIOs for write protection + +Examples: + +ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + reg = <0x80010000 2000>; + interrupts = <96 82>; + fsl,ssp-dma-channel = <0>; + bus-width = <8>; +}; diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt index 7e51154679a6..f77c3031607f 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt @@ -7,12 +7,12 @@ Required properties: - compatible : Should be "nvidia,<chip>-sdhci" - reg : Should contain SD/MMC registers location and length - interrupts : Should contain SD/MMC interrupt +- bus-width : Number of data lines, can be <1>, <4>, or <8> Optional properties: - cd-gpios : Specify GPIOs for card detection - wp-gpios : Specify GPIOs for write protection - power-gpios : Specify GPIOs for power control -- support-8bit : Boolean, indicates if 8-bit mode should be used. Example: @@ -23,5 +23,5 @@ sdhci@c8000200 { cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ - support-8bit; + bus-width = <8>; }; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index dbd4368ab8cc..8a53958c9a9f 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -15,7 +15,7 @@ Optional properties: ti,dual-volt: boolean, supports dual voltage cards <supply-name>-supply: phandle to the regulator device tree node "supply-name" examples are "vmmc", "vmmc_aux" etc -ti,bus-width: Number of data lines, default assumed is 1 if the property is missing. +bus-width: Number of data lines, default assumed is 1 if the property is missing. cd-gpios: GPIOs for card detection wp-gpios: GPIOs for write protection ti,non-removable: non-removable slot (like eMMC) @@ -27,7 +27,7 @@ Example: reg = <0x4809c000 0x400>; ti,hwmods = "mmc1"; ti,dual-volt; - ti,bus-width = <4>; + bus-width = <4>; vmmc-supply = <&vmmc>; /* phandle to regulator node */ ti,non-removable; }; diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index de439517dff0..7ab9e1a2d8be 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -14,7 +14,7 @@ Optional properties: Example: -fec@83fec000 { +ethernet@83fec000 { compatible = "fsl,imx51-fec", "fsl,imx27-fec"; reg = <0x83fec000 0x4000>; interrupts = <87>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt index 3664d37e6799..b4480d5c3aca 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt @@ -4,6 +4,8 @@ Required properties: - compatible : "st,spear300-pinmux" : "st,spear310-pinmux" : "st,spear320-pinmux" + : "st,spear1310-pinmux" + : "st,spear1340-pinmux" - reg : Address range of the pinctrl registers - st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others. - Its values for SPEAr300: @@ -89,6 +91,37 @@ For SPEAr320 machines: "rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp", "i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp" +For SPEAr1310 machines: + "i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp", + "i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp", + "smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp", + "smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp", + "nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp", + "keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp", + "gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp", + "sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp", + "uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp", + "uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp", + "i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp", + "i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp", + "i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp", + "can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp", + "pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp", + "ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp" + +For SPEAr1340 machines: + "pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp", + "keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp", + "spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp", + "pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp", + "vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp", + "cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp", + "ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp", + "uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp", + "rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp", + "sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp", + "miphy_dbg_grp", "pcie_grp", "sata_grp" + Valid values for function names are: For All SPEAr3xx machines: "firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext", @@ -106,3 +139,17 @@ For SPEAr320 machines: "uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen", "can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2", "mii0_1", "i2c1", "i2c2" + + +For SPEAr1310 machines: + "i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii", + "rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0", + "gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3", + "uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1", + "i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64" + +For SPEAr1340 machines: + "pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1", + "pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0", + "uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf", + "xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata" diff --git a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt new file mode 100644 index 000000000000..e4acdd891e49 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt @@ -0,0 +1,49 @@ +Freescale i.MX audio complex with SGTL5000 codec + +Required properties: +- compatible : "fsl,imx-audio-sgtl5000" +- model : The user-visible name of this sound complex +- ssi-controller : The phandle of the i.MX SSI controller +- audio-codec : The phandle of the SGTL5000 audio codec +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names could be power + supplies, SGTL5000 pins, and the jacks on the board: + + Power supplies: + * Mic Bias + + SGTL5000 pins: + * MIC_IN + * LINE_IN + * HP_OUT + * LINE_OUT + + Board connectors: + * Mic Jack + * Line In Jack + * Headphone Jack + * Line Out Jack + * Ext Spk + +- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) +- mux-ext-port : The external port of the i.MX audio muxer + +Note: The AUDMUX port numbering should start at 1, which is consistent with +hardware manual. + +Example: + +sound { + compatible = "fsl,imx51-babbage-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx51-babbage-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; +}; diff --git a/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt new file mode 100644 index 000000000000..601c518eddaa --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt @@ -0,0 +1,17 @@ +* Freescale MXS audio complex with SGTL5000 codec + +Required properties: +- compatible: "fsl,mxs-audio-sgtl5000" +- model: The user-visible name of this sound complex +- saif-controllers: The phandle list of the MXS SAIF controller +- audio-codec: The phandle of the SGTL5000 audio codec + +Example: + +sound { + compatible = "fsl,imx28-evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; +}; diff --git a/Documentation/devicetree/bindings/sound/mxs-saif.txt b/Documentation/devicetree/bindings/sound/mxs-saif.txt new file mode 100644 index 000000000000..c37ba6143d9b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mxs-saif.txt @@ -0,0 +1,36 @@ +* Freescale MXS Serial Audio Interface (SAIF) + +Required properties: +- compatible: Should be "fsl,<chip>-saif" +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts +- fsl,saif-dma-channel: APBX DMA channel for the SAIF + +Optional properties: +- fsl,saif-master: phandle to the master SAIF. It's only required for + the slave SAIF. + +Note: Each SAIF controller should have an alias correctly numbered +in "aliases" node. + +Example: + +aliases { + saif0 = &saif0; + saif1 = &saif1; +}; + +saif0: saif@80042000 { + compatible = "fsl,imx28-saif"; + reg = <0x80042000 2000>; + interrupts = <59 80>; + fsl,saif-dma-channel = <4>; +}; + +saif1: saif@80046000 { + compatible = "fsl,imx28-saif"; + reg = <0x80046000 2000>; + interrupts = <58 81>; + fsl,saif-dma-channel = <5>; + fsl,saif-master = <&saif0>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt new file mode 100644 index 000000000000..1ac7b1642186 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt @@ -0,0 +1,32 @@ +NVIDIA Tegra30 AHUB (Audio Hub) + +Required properties: +- compatible : "nvidia,tegra30-ahub" +- reg : Should contain the register physical address and length for each of + the AHUB's APBIF registers and the AHUB's own registers. +- interrupts : Should contain AHUB interrupt +- nvidia,dma-request-selector : The Tegra DMA controller's phandle and + request selector for the first APBIF channel. +- ranges : The bus address mapping for the configlink register bus. + Can be empty since the mapping is 1:1. +- #address-cells : For the configlink bus. Should be <1>; +- #size-cells : For the configlink bus. Should be <1>. + +AHUB client modules need to specify the IDs of their CIFs (Client InterFaces). +For RX CIFs, the numbers indicate the register number within AHUB routing +register space (APBIF 0..3 RX, I2S 0..5 RX, DAM 0..2 RX 0..1, SPDIF RX 0..1). +For TX CIFs, the numbers indicate the bit position within the AHUB routing +registers (APBIF 0..3 TX, I2S 0..5 TX, DAM 0..2 TX, SPDIF TX 0..1). + +Example: + +ahub@70080000 { + compatible = "nvidia,tegra30-ahub"; + reg = <0x70080000 0x200 0x70080200 0x100>; + interrupts = < 0 103 0x04 >; + nvidia,dma-request-selector = <&apbdma 1>; + + ranges; + #address-cells = <1>; + #size-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt new file mode 100644 index 000000000000..dfa6c037124a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt @@ -0,0 +1,15 @@ +NVIDIA Tegra30 I2S controller + +Required properties: +- compatible : "nvidia,tegra30-i2s" +- reg : Should contain I2S registers location and length +- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback) + first, tx (capture) second. See nvidia,tegra30-ahub.txt for values. + +Example: + +i2s@70002800 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080300 0x100>; + nvidia,ahub-cif-ids = <4 4>; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-dmic.txt b/Documentation/devicetree/bindings/sound/omap-dmic.txt new file mode 100644 index 000000000000..fd8105f18978 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-dmic.txt @@ -0,0 +1,21 @@ +* Texas Instruments OMAP4+ Digital Microphone Module + +Required properties: +- compatible: "ti,omap4-dmic" +- reg: Register location and size as an array: + <MPU access base address, size>, + <L3 interconnect address, size>; +- interrupts: Interrupt number for DMIC +- interrupt-parent: The parent interrupt controller +- ti,hwmods: Name of the hwmod associated with OMAP dmic IP + +Example: + +dmic: dmic@4012e000 { + compatible = "ti,omap4-dmic"; + reg = <0x4012e000 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + interrupts = <0 114 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "dmic"; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt new file mode 100644 index 000000000000..0741dff048dd --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt @@ -0,0 +1,21 @@ +* Texas Instruments OMAP4+ McPDM + +Required properties: +- compatible: "ti,omap4-mcpdm" +- reg: Register location and size as an array: + <MPU access base address, size>, + <L3 interconnect address, size>; +- interrupts: Interrupt number for McPDM +- interrupt-parent: The parent interrupt controller +- ti,hwmods: Name of the hwmod associated to the McPDM + +Example: + +mcpdm: mcpdm@40132000 { + compatible = "ti,omap4-mcpdm"; + reg = <0x40132000 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + interrupts = <0 112 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "mcpdm"; +}; diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt b/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt new file mode 100644 index 000000000000..04b14cfb1f16 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt @@ -0,0 +1,14 @@ +NVIDIA Tegra audio complex for TrimSlice + +Required properties: +- compatible : "nvidia,tegra-audio-trimslice" +- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller +- nvidia,audio-codec : The phandle of the WM8903 audio codec + +Example: + +sound { + compatible = "nvidia,tegra-audio-trimslice"; + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&codec>; +}; diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt new file mode 100644 index 000000000000..c4dd39ce6165 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt @@ -0,0 +1,54 @@ +NVIDIA Tegra audio complex + +Required properties: +- compatible : "nvidia,tegra-audio-wm8753" +- nvidia,model : The user-visible name of this sound complex. +- nvidia,audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources and + sinks are the WM8753's pins, and the jacks on the board: + + WM8753 pins: + + * LOUT1 + * LOUT2 + * ROUT1 + * ROUT2 + * MONO1 + * MONO2 + * OUT3 + * OUT4 + * LINE1 + * LINE2 + * RXP + * RXN + * ACIN + * ACOP + * MIC1N + * MIC1 + * MIC2N + * MIC2 + * Mic Bias + + Board connectors: + + * Headphone Jack + * Mic Jack + +- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller +- nvidia,audio-codec : The phandle of the WM8753 audio codec +Example: + +sound { + compatible = "nvidia,tegra-audio-wm8753-whistler", + "nvidia,tegra-audio-wm8753" + nvidia,model = "tegra-wm8753-harmony"; + + nvidia,audio-routing = + "Headphone Jack", "LOUT1", + "Headphone Jack", "ROUT1"; + + nvidia,i2s-controller = <&i2s1>; + nvidia,audio-codec = <&wm8753>; +}; + diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt index a9c0406280e8..b462d0c54823 100644 --- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt @@ -11,7 +11,7 @@ Optional properties: Example: -uart@73fbc000 { +serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; diff --git a/Documentation/devicetree/bindings/usb/tegra-usb.txt b/Documentation/devicetree/bindings/usb/tegra-usb.txt index 007005ddbe12..e9b005dc7625 100644 --- a/Documentation/devicetree/bindings/usb/tegra-usb.txt +++ b/Documentation/devicetree/bindings/usb/tegra-usb.txt @@ -12,6 +12,9 @@ Required properties : - nvidia,vbus-gpio : If present, specifies a gpio that needs to be activated for the bus to be powered. +Required properties for phy_type == ulpi: + - nvidia,phy-reset-gpio : The GPIO used to reset the PHY. + Optional properties: - dr_mode : dual role mode. Indicates the working mode for nvidia,tegra20-ehci compatible controllers. Can be "host", "peripheral", diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 107d8addf0e4..6eab91747a86 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -14,6 +14,7 @@ chrp Common Hardware Reference Platform cortina Cortina Systems, Inc. dallas Maxim Integrated Products (formerly Dallas Semiconductor) denx Denx Software Engineering +emmicro EM Microelectronic epson Seiko Epson Corp. est ESTeem Wireless Modems fsl Freescale Semiconductor diff --git a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt new file mode 100644 index 000000000000..7c7f6887c796 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt @@ -0,0 +1,13 @@ +* NXP PNX watchdog timer + +Required properties: +- compatible: must be "nxp,pnx4008-wdt" +- reg: physical base address of the controller and length of memory mapped + region. + +Example: + + watchdog@4003C000 { + compatible = "nxp,pnx4008-wdt"; + reg = <0x4003C000 0x1000>; + }; diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index da0bfeb4253d..d4d66757354e 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -551,12 +551,13 @@ Here is an example of a simple device-tree. In this example, an "o" designates a node followed by the node unit name. Properties are presented with their name followed by their content. "content" represents an ASCII string (zero terminated) value, while <content> -represents a 32-bit hexadecimal value. The various nodes in this -example will be discussed in a later chapter. At this point, it is -only meant to give you a idea of what a device-tree looks like. I have -purposefully kept the "name" and "linux,phandle" properties which -aren't necessary in order to give you a better idea of what the tree -looks like in practice. +represents a 32-bit value, specified in decimal or hexadecimal (the +latter prefixed 0x). The various nodes in this example will be +discussed in a later chapter. At this point, it is only meant to give +you a idea of what a device-tree looks like. I have purposefully kept +the "name" and "linux,phandle" properties which aren't necessary in +order to give you a better idea of what the tree looks like in +practice. / o device-tree |- name = "device-tree" @@ -576,14 +577,14 @@ looks like in practice. | |- name = "PowerPC,970" | |- device_type = "cpu" | |- reg = <0> - | |- clock-frequency = <5f5e1000> + | |- clock-frequency = <0x5f5e1000> | |- 64-bit | |- linux,phandle = <2> | o memory@0 | |- name = "memory" | |- device_type = "memory" - | |- reg = <00000000 00000000 00000000 20000000> + | |- reg = <0x00000000 0x00000000 0x00000000 0x20000000> | |- linux,phandle = <3> | o chosen @@ -1010,8 +1011,8 @@ compatibility. #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - ranges = <00000000 e0000000 00100000> - reg = <e0000000 00003000>; + ranges = <0x00000000 0xe0000000 0x00100000> + reg = <0xe0000000 0x00003000>; bus-frequency = <0>; } @@ -1085,16 +1086,16 @@ supported currently at the toplevel. * terminated string */ - property2 = <1234abcd>; /* define a property containing a + property2 = <0x1234abcd>; /* define a property containing a * numerical 32-bit value (hexadecimal) */ - property3 = <12345678 12345678 deadbeef>; + property3 = <0x12345678 0x12345678 0xdeadbeef>; /* define a property containing 3 * numerical 32-bit values (cells) in * hexadecimal */ - property4 = [0a 0b 0c 0d de ea ad be ef]; + property4 = [0x0a 0x0b 0x0c 0x0d 0xde 0xea 0xad 0xbe 0xef]; /* define a property whose content is * an arbitrary array of bytes */ @@ -1350,10 +1351,10 @@ Appendix A - Sample SOC node for MPC8540 model = "TSEC"; compatible = "gianfar", "simple-bus"; reg = <0x24000 0x1000>; - local-mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <29 2 30 2 34 2>; + local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x00 ]; + interrupts = <0x29 2 0x30 2 0x34 2>; phy-handle = <&phy0>; - sleep = <&pmc 00000080>; + sleep = <&pmc 0x00000080>; ranges; mdio@24520 { @@ -1385,10 +1386,10 @@ Appendix A - Sample SOC node for MPC8540 model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; - local-mac-address = [ 00 E0 0C 00 73 01 ]; - interrupts = <13 2 14 2 18 2>; + local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x01 ]; + interrupts = <0x13 2 0x14 2 0x18 2>; phy-handle = <&phy1>; - sleep = <&pmc 00000040>; + sleep = <&pmc 0x00000040>; }; ethernet@26000 { @@ -1396,17 +1397,17 @@ Appendix A - Sample SOC node for MPC8540 model = "FEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; - local-mac-address = [ 00 E0 0C 00 73 02 ]; - interrupts = <41 2>; + local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x02 ]; + interrupts = <0x41 2>; phy-handle = <&phy3>; - sleep = <&pmc 00000020>; + sleep = <&pmc 0x00000020>; }; serial@4500 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8540-duart", "simple-bus"; - sleep = <&pmc 00000002>; + sleep = <&pmc 0x00000002>; ranges; serial@4500 { @@ -1414,7 +1415,7 @@ Appendix A - Sample SOC node for MPC8540 compatible = "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <42 2>; + interrupts = <0x42 2>; }; serial@4600 { @@ -1422,7 +1423,7 @@ Appendix A - Sample SOC node for MPC8540 compatible = "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <42 2>; + interrupts = <0x42 2>; }; }; @@ -1436,11 +1437,11 @@ Appendix A - Sample SOC node for MPC8540 }; i2c@3000 { - interrupts = <43 2>; + interrupts = <0x43 2>; reg = <0x3000 0x100>; compatible = "fsl-i2c"; dfsrr; - sleep = <&pmc 00000004>; + sleep = <&pmc 0x00000004>; }; pmc: power@e0070 { diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt index 3bbd5c51605a..ad86fb86c9a0 100644 --- a/Documentation/dma-buf-sharing.txt +++ b/Documentation/dma-buf-sharing.txt @@ -29,13 +29,6 @@ The buffer-user in memory, mapped into its own address space, so it can access the same area of memory. -*IMPORTANT*: [see https://lkml.org/lkml/2011/12/20/211 for more details] -For this first version, A buffer shared using the dma_buf sharing API: -- *may* be exported to user space using "mmap" *ONLY* by exporter, outside of - this framework. -- with this new iteration of the dma-buf api cpu access from the kernel has been - enable, see below for the details. - dma-buf operations for device dma only -------------------------------------- @@ -300,6 +293,17 @@ Access to a dma_buf from the kernel context involves three steps: Note that these calls need to always succeed. The exporter needs to complete any preparations that might fail in begin_cpu_access. + For some cases the overhead of kmap can be too high, a vmap interface + is introduced. This interface should be used very carefully, as vmalloc + space is a limited resources on many architectures. + + Interfaces: + void *dma_buf_vmap(struct dma_buf *dmabuf) + void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr) + + The vmap call can fail if there is no vmap support in the exporter, or if it + runs out of vmalloc space. Fallback to kmap should be implemented. + 3. Finish access When the importer is done accessing the range specified in begin_cpu_access, @@ -313,6 +317,83 @@ Access to a dma_buf from the kernel context involves three steps: enum dma_data_direction dir); +Direct Userspace Access/mmap Support +------------------------------------ + +Being able to mmap an export dma-buf buffer object has 2 main use-cases: +- CPU fallback processing in a pipeline and +- supporting existing mmap interfaces in importers. + +1. CPU fallback processing in a pipeline + + In many processing pipelines it is sometimes required that the cpu can access + the data in a dma-buf (e.g. for thumbnail creation, snapshots, ...). To avoid + the need to handle this specially in userspace frameworks for buffer sharing + it's ideal if the dma_buf fd itself can be used to access the backing storage + from userspace using mmap. + + Furthermore Android's ION framework already supports this (and is otherwise + rather similar to dma-buf from a userspace consumer side with using fds as + handles, too). So it's beneficial to support this in a similar fashion on + dma-buf to have a good transition path for existing Android userspace. + + No special interfaces, userspace simply calls mmap on the dma-buf fd. + +2. Supporting existing mmap interfaces in exporters + + Similar to the motivation for kernel cpu access it is again important that + the userspace code of a given importing subsystem can use the same interfaces + with a imported dma-buf buffer object as with a native buffer object. This is + especially important for drm where the userspace part of contemporary OpenGL, + X, and other drivers is huge, and reworking them to use a different way to + mmap a buffer rather invasive. + + The assumption in the current dma-buf interfaces is that redirecting the + initial mmap is all that's needed. A survey of some of the existing + subsystems shows that no driver seems to do any nefarious thing like syncing + up with outstanding asynchronous processing on the device or allocating + special resources at fault time. So hopefully this is good enough, since + adding interfaces to intercept pagefaults and allow pte shootdowns would + increase the complexity quite a bit. + + Interface: + int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *, + unsigned long); + + If the importing subsystem simply provides a special-purpose mmap call to set + up a mapping in userspace, calling do_mmap with dma_buf->file will equally + achieve that for a dma-buf object. + +3. Implementation notes for exporters + + Because dma-buf buffers have invariant size over their lifetime, the dma-buf + core checks whether a vma is too large and rejects such mappings. The + exporter hence does not need to duplicate this check. + + Because existing importing subsystems might presume coherent mappings for + userspace, the exporter needs to set up a coherent mapping. If that's not + possible, it needs to fake coherency by manually shooting down ptes when + leaving the cpu domain and flushing caches at fault time. Note that all the + dma_buf files share the same anon inode, hence the exporter needs to replace + the dma_buf file stored in vma->vm_file with it's own if pte shootdown is + requred. This is because the kernel uses the underlying inode's address_space + for vma tracking (and hence pte tracking at shootdown time with + unmap_mapping_range). + + If the above shootdown dance turns out to be too expensive in certain + scenarios, we can extend dma-buf with a more explicit cache tracking scheme + for userspace mappings. But the current assumption is that using mmap is + always a slower path, so some inefficiencies should be acceptable. + + Exporters that shoot down mappings (for any reasons) shall not do any + synchronization at fault time with outstanding device operations. + Synchronization is an orthogonal issue to sharing the backing storage of a + buffer and hence should not be handled by dma-buf itself. This is explictly + mentioned here because many people seem to want something like this, but if + different exporters handle this differently, buffer sharing can fail in + interesting ways depending upong the exporter (if userspace starts depending + upon this implicit synchronization). + Miscellaneous notes ------------------- @@ -336,6 +417,20 @@ Miscellaneous notes the exporting driver to create a dmabuf fd must provide a way to let userspace control setting of O_CLOEXEC flag passed in to dma_buf_fd(). +- If an exporter needs to manually flush caches and hence needs to fake + coherency for mmap support, it needs to be able to zap all the ptes pointing + at the backing storage. Now linux mm needs a struct address_space associated + with the struct file stored in vma->vm_file to do that with the function + unmap_mapping_range. But the dma_buf framework only backs every dma_buf fd + with the anon_file struct file, i.e. all dma_bufs share the same file. + + Hence exporters need to setup their own file (and address_space) association + by setting vma->vm_file and adjusting vma->vm_pgoff in the dma_buf mmap + callback. In the specific case of a gem driver the exporter could use the + shmem file already provided by gem (and set vm_pgoff = 0). Exporters can then + zap ptes by unmapping the corresponding range of the struct address_space + associated with their own file. + References: [1] struct dma_buf_ops in include/linux/dma-buf.h [2] All interfaces mentioned above defined in include/linux/dma-buf.h diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index d1d4a179a382..fbb241174486 100755 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -28,7 +28,8 @@ use IO::Handle; "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718", "af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395", "lme2510c_s7395_old", "drxk", "drxk_terratec_h5", - "drxk_hauppauge_hvr930c", "tda10071", "it9135", "it9137"); + "drxk_hauppauge_hvr930c", "tda10071", "it9135", "it9137", + "drxk_pctv"); # Check args syntax() if (scalar(@ARGV) != 1); @@ -730,6 +731,23 @@ sub tda10071 { "$fwfile"; } +sub drxk_pctv { + my $sourcefile = "PCTV_460e_reference.zip"; + my $url = "ftp://ftp.pctvsystems.com/TV/driver/PCTV%2070e%2080e%20100e%20320e%20330e%20800e/"; + my $hash = "4403de903bf2593464c8d74bbc200a57"; + my $fwfile = "dvb-demod-drxk-pctv.fw"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + + checkstandard(); + + wgetfile($sourcefile, $url . $sourcefile); + verify($sourcefile, $hash); + unzip($sourcefile, $tmpdir); + extract("$tmpdir/PCTV\ 70e\ 80e\ 100e\ 320e\ 330e\ 800e/32\ bit/emOEM.sys", 0x72b80, 42692, $fwfile); + + "$fwfile"; +} + # --------------------------------------------------------------- # Utilities diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt index 38cf0c7b559f..a55e4910924e 100644 --- a/Documentation/eisa.txt +++ b/Documentation/eisa.txt @@ -179,7 +179,7 @@ CONFIG_ALPHA_JENSEN or CONFIG_EISA_VLB_PRIMING are set. Converting an EISA driver to the new API mostly involves *deleting* code (since probing is now in the core EISA code). Unfortunately, most -drivers share their probing routine between ISA, MCA and EISA. Special +drivers share their probing routine between ISA, and EISA. Special care must be taken when ripping out the EISA code, so other busses won't suffer from these surgical strikes... diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 1e69a81e99d4..ebaffe208ccb 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -541,6 +541,18 @@ Who: Kees Cook <keescook@chromium.org> ---------------------------- +What: Removing the pn544 raw driver. +When: 3.6 +Why: With the introduction of the NFC HCI and SHDL kernel layers, pn544.c + is being replaced by pn544_hci.c which is accessible through the netlink + and socket NFC APIs. Moreover, pn544.c is outdated and does not seem to + work properly with the latest Android stacks. + Having 2 drivers for the same hardware is confusing and as such we + should only keep the one following the kernel NFC APIs. +Who: Samuel Ortiz <sameo@linux.intel.com> + +---------------------------- + What: setitimer accepts user NULL pointer (value) When: 3.6 Why: setitimer is not returning -EFAULT if user pointer is NULL. This @@ -549,6 +561,15 @@ Who: Sasikantha Babu <sasikanth.v19@gmail.com> ---------------------------- +What: remove bogus DV presets V4L2_DV_1080I29_97, V4L2_DV_1080I30 and + V4L2_DV_1080I25 +When: 3.6 +Why: These HDTV formats do not exist and were added by a confused mind + (that was me, to be precise...) +Who: Hans Verkuil <hans.verkuil@cisco.com> + +---------------------------- + What: V4L2_CID_HCENTER, V4L2_CID_VCENTER V4L2 controls When: 3.7 Why: The V4L2_CID_VCENTER, V4L2_CID_HCENTER controls have been deprecated @@ -567,3 +588,21 @@ Why: Remount currently allows changing bound subsystems and replaced with conventional fsnotify. ---------------------------- + +What: KVM debugfs statistics +When: 2013 +Why: KVM tracepoints provide mostly equivalent information in a much more + flexible fashion. + +---------------------------- + +What: at91-mci driver ("CONFIG_MMC_AT91") +When: 3.7 +Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support + was added to atmel-mci as a first step to support more chips. + Then at91-mci was kept only for old IP versions (on at91rm9200 and + at91sam9261). The support of these IP versions has just been added + to atmel-mci, so atmel-mci can be used for all chips. +Who: Ludovic Desroches <ludovic.desroches@atmel.com> + +---------------------------- diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index 74acd9618819..8c91d1057d9a 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -297,7 +297,8 @@ in the beginning of ->setattr unconditionally. be used instead. It gets called whenever the inode is evicted, whether it has remaining links or not. Caller does *not* evict the pagecache or inode-associated metadata buffers; getting rid of those is responsibility of method, as it had -been for ->delete_inode(). +been for ->delete_inode(). Caller makes sure async writeback cannot be running +for the inode while (or after) ->evict_inode() is called. ->drop_inode() returns int now; it's called on final iput() with inode->i_lock held and it returns true if filesystems wants the inode to be @@ -306,14 +307,11 @@ updated appropriately. generic_delete_inode() is also alive and it consists simply of return 1. Note that all actual eviction work is done by caller after ->drop_inode() returns. - clear_inode() is gone; use end_writeback() instead. As before, it must -be called exactly once on each call of ->evict_inode() (as it used to be for -each call of ->delete_inode()). Unlike before, if you are using inode-associated -metadata buffers (i.e. mark_buffer_dirty_inode()), it's your responsibility to -call invalidate_inode_buffers() before end_writeback(). - No async writeback (and thus no calls of ->write_inode()) will happen -after end_writeback() returns, so actions that should not overlap with ->write_inode() -(e.g. freeing on-disk inode if i_nlink is 0) ought to be done after that call. + As before, clear_inode() must be called exactly once on each call of +->evict_inode() (as it used to be for each call of ->delete_inode()). Unlike +before, if you are using inode-associated metadata buffers (i.e. +mark_buffer_dirty_inode()), it's your responsibility to call +invalidate_inode_buffers() before clear_inode(). NOTE: checking i_nlink in the beginning of ->write_inode() and bailing out if it's zero is not *and* *never* *had* *been* enough. Final unlink() and iput() diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index 620a07844e8c..e08a883de36e 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -322,6 +322,9 @@ where 'flags' is currently defined to specify the following properties: * GPIOF_OPEN_DRAIN - gpio pin is open drain type. * GPIOF_OPEN_SOURCE - gpio pin is open source type. + * GPIOF_EXPORT_DIR_FIXED - export gpio to sysfs, keep direction + * GPIOF_EXPORT_DIR_CHANGEABLE - also export, allow changing direction + since GPIOF_INIT_* are only valid when configured as output, so group valid combinations as: diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx new file mode 100644 index 000000000000..f50a6cc27616 --- /dev/null +++ b/Documentation/hwmon/ina2xx @@ -0,0 +1,29 @@ +Kernel driver ina2xx +==================== + +Supported chips: + * Texas Instruments INA219 + Prefix: 'ina219' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website + http://www.ti.com/ + + * Texas Instruments INA226 + Prefix: 'ina226' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website + http://www.ti.com/ + +Author: Lothar Felten <l-felten@ti.com> + +Description +----------- + +The INA219 is a high-side current shunt and power monitor with an I2C +interface. The INA219 monitors both shunt drop and supply voltage, with +programmable conversion times and filtering. + +The INA226 is a current shunt and power monitor with an I2C interface. +The INA226 monitors both a shunt voltage drop and bus supply voltage. + +The shunt value in micro-ohms can be set via platform data. diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index fba745571684..87850d86c559 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -30,6 +30,14 @@ Supported chips: Prefix: 'it8728' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Not publicly available + * IT8782F + Prefix: 'it8782' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available + * IT8783E/F + Prefix: 'it8783' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available * SiS950 [clone of IT8705F] Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -75,7 +83,8 @@ Description ----------- This driver implements support for the IT8705F, IT8712F, IT8716F, -IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E and SiS950 chips. +IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8781F, IT8782F, +IT8783E/F, and SiS950 chips. These chips are 'Super I/O chips', supporting floppy disks, infrared ports, joysticks and other miscellaneous stuff. For hardware monitoring, they @@ -99,11 +108,11 @@ The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions have support for 2 additional fans. The additional fans are supported by the driver. -The IT8716F, IT8718F, IT8720F and IT8721F/IT8758E, and late IT8712F and -IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This -is better (no more fan clock divider mess) but not compatible with the older -chips and revisions. The 16-bit tachometer mode is enabled by the driver when -one of the above chips is detected. +The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8782F, IT8783E/F, and late +IT8712F and IT8705F also have optional 16-bit tachometer counters for fans 1 to +3. This is better (no more fan clock divider mess) but not compatible with the +older chips and revisions. The 16-bit tachometer mode is enabled by the driver +when one of the above chips is detected. The IT8726F is just bit enhanced IT8716F with additional hardware for AMD power sequencing. Therefore the chip will appear as IT8716F @@ -131,9 +140,10 @@ inputs can measure voltages between 0 and 4.08 volts, with a resolution of 0.016 volt (except IT8721F/IT8758E and IT8728F: 0.012 volt.) The battery voltage in8 does not have limit registers. -On the IT8721F/IT8758E, some voltage inputs are internal and scaled inside -the chip (in7, in8 and optionally in3). The driver handles this transparently -so user-space doesn't have to care. +On the IT8721F/IT8758E, IT8782F, and IT8783E/F, some voltage inputs are +internal and scaled inside the chip (in7 (optional for IT8782F and IT8783E/F), +in8 and optionally in3). The driver handles this transparently so user-space +doesn't have to care. The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value: the voltage level your processor should work with. This is hardcoded by diff --git a/Documentation/i2c/muxes/gpio-i2cmux b/Documentation/i2c/muxes/i2c-mux-gpio index 811cd78d4cdc..bd9b2299b739 100644 --- a/Documentation/i2c/muxes/gpio-i2cmux +++ b/Documentation/i2c/muxes/i2c-mux-gpio @@ -1,11 +1,11 @@ -Kernel driver gpio-i2cmux +Kernel driver i2c-gpio-mux Author: Peter Korsgaard <peter.korsgaard@barco.com> Description ----------- -gpio-i2cmux is an i2c mux driver providing access to I2C bus segments +i2c-gpio-mux is an i2c mux driver providing access to I2C bus segments from a master I2C bus and a hardware MUX controlled through GPIO pins. E.G.: @@ -26,16 +26,16 @@ according to the settings of the GPIO pins 1..N. Usage ----- -gpio-i2cmux uses the platform bus, so you need to provide a struct +i2c-gpio-mux uses the platform bus, so you need to provide a struct platform_device with the platform_data pointing to a struct gpio_i2cmux_platform_data with the I2C adapter number of the master bus, the number of bus segments to create and the GPIO pins used -to control it. See include/linux/gpio-i2cmux.h for details. +to control it. See include/linux/i2c-gpio-mux.h for details. E.G. something like this for a MUX providing 4 bus segments controlled through 3 GPIO pins: -#include <linux/gpio-i2cmux.h> +#include <linux/i2c-gpio-mux.h> #include <linux/platform_device.h> static const unsigned myboard_gpiomux_gpios[] = { @@ -57,7 +57,7 @@ static struct gpio_i2cmux_platform_data myboard_i2cmux_data = { }; static struct platform_device myboard_i2cmux = { - .name = "gpio-i2cmux", + .name = "i2c-gpio-mux", .id = 0, .dev = { .platform_data = &myboard_i2cmux_data, diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index 68e32bb6bd80..6466704d47b5 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -50,6 +50,10 @@ LDFLAGS_MODULE -------------------------------------------------- Additional options used for $(LD) when linking modules. +LDFLAGS_vmlinux +-------------------------------------------------- +Additional options passed to final link of vmlinux. + KBUILD_VERBOSE -------------------------------------------------- Set the kbuild verbosity. Can be assigned same values as "V=...". @@ -214,3 +218,18 @@ KBUILD_BUILD_USER, KBUILD_BUILD_HOST These two variables allow to override the user@host string displayed during boot and in /proc/version. The default value is the output of the commands whoami and host, respectively. + +KBUILD_LDS +-------------------------------------------------- +The linker script with full path. Assigned by the top-level Makefile. + +KBUILD_VMLINUX_INIT +-------------------------------------------------- +All object files for the init (first) part of vmlinux. +Files specified with KBUILD_VMLINUX_INIT are linked first. + +KBUILD_VMLINUX_MAIN +-------------------------------------------------- +All object files for the main part of vmlinux. +KBUILD_VMLINUX_INIT and KBUILD_VMLINUX_MAIN together specify +all the object files used to link vmlinux. diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index 9d5f2a90dca9..a09f1a6a830c 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -53,15 +53,15 @@ KCONFIG_ALLCONFIG -------------------------------------------------- (partially based on lkml email from/by Rob Landley, re: miniconfig) -------------------------------------------------- -The allyesconfig/allmodconfig/allnoconfig/randconfig variants can -also use the environment variable KCONFIG_ALLCONFIG as a flag or a -filename that contains config symbols that the user requires to be -set to a specific value. If KCONFIG_ALLCONFIG is used without a -filename, "make *config" checks for a file named -"all{yes/mod/no/def/random}.config" (corresponding to the *config command -that was used) for symbol values that are to be forced. If this file -is not found, it checks for a file named "all.config" to contain forced -values. +The allyesconfig/allmodconfig/allnoconfig/randconfig variants can also +use the environment variable KCONFIG_ALLCONFIG as a flag or a filename +that contains config symbols that the user requires to be set to a +specific value. If KCONFIG_ALLCONFIG is used without a filename where +KCONFIG_ALLCONFIG == "" or KCONFIG_ALLCONFIG == "1", "make *config" +checks for a file named "all{yes/mod/no/def/random}.config" +(corresponding to the *config command that was used) for symbol values +that are to be forced. If this file is not found, it checks for a +file named "all.config" to contain forced values. This enables you to create "miniature" config (miniconfig) or custom config files containing just the config symbols that you are interested diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1a332c703e1b..b40b413db88e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -70,7 +70,6 @@ parameter is applicable: M68k M68k architecture is enabled. These options have more detailed description inside of Documentation/m68k/kernel-options.txt. - MCA MCA bus support is enabled. MDA MDA console support is enabled. MIPS MIPS architecture is enabled. MOUSE Appropriate mouse support is enabled. @@ -507,6 +506,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Also note the kernel might malfunction if you disable some critical bits. + cma=nn[MG] [ARM,KNL] + Sets the size of kernel global memory area for contiguous + memory allocations. For more information, see + include/linux/dma-contiguous.h + cmo_free_hint= [PPC] Format: { yes | no } Specify whether pages are marked as being inactive when they are freed. This is used in CMO environments @@ -514,6 +518,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. a hypervisor. Default: yes + coherent_pool=nn[KMG] [ARM,KNL] + Sets the size of memory pool for coherent, atomic dma + allocations if Contiguous Memory Allocator (CMA) is used. + code_bytes [X86] How many bytes of object code to print in an oops report. Range: 0 - 8192 @@ -986,6 +994,20 @@ bytes respectively. Such letter suffixes can also be entirely omitted. i8k.restricted [HW] Allow controlling fans only if SYS_ADMIN capability is set. + i915.invert_brightness= + [DRM] Invert the sense of the variable that is used to + set the brightness of the panel backlight. Normally a + brightness value of 0 indicates backlight switched off, + and the maximum of the brightness value sets the backlight + to maximum brightness. If this parameter is set to 0 + (default) and the machine requires it, or this parameter + is set to 1, a brightness value of 0 sets the backlight + to maximum brightness, and the maximum of the brightness + value switches the backlight off. + -1 -- never invert brightness + 0 -- machine default + 1 -- force brightness inversion + icn= [HW,ISDN] Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]] @@ -2459,6 +2481,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. resume= [SWSUSP] Specify the partition device for software suspend + Format: + {/dev/<dev> | PARTUUID=<uuid> | <int>:<int> | <hex>} resume_offset= [SWSUSP] Specify the offset from the beginning of the partition diff --git a/Documentation/mca.txt b/Documentation/mca.txt deleted file mode 100644 index dfd130c2207d..000000000000 --- a/Documentation/mca.txt +++ /dev/null @@ -1,313 +0,0 @@ -i386 Micro Channel Architecture Support -======================================= - -MCA support is enabled using the CONFIG_MCA define. A machine with a MCA -bus will have the kernel variable MCA_bus set, assuming the BIOS feature -bits are set properly (see arch/i386/boot/setup.S for information on -how this detection is done). - -Adapter Detection -================= - -The ideal MCA adapter detection is done through the use of the -Programmable Option Select registers. Generic functions for doing -this have been added in include/linux/mca.h and arch/x86/kernel/mca_32.c. -Everything needed to detect adapters and read (and write) configuration -information is there. A number of MCA-specific drivers already use -this. The typical probe code looks like the following: - - #include <linux/mca.h> - - unsigned char pos2, pos3, pos4, pos5; - struct net_device* dev; - int slot; - - if( MCA_bus ) { - slot = mca_find_adapter( ADAPTER_ID, 0 ); - if( slot == MCA_NOTFOUND ) { - return -ENODEV; - } - /* optional - see below */ - mca_set_adapter_name( slot, "adapter name & description" ); - mca_set_adapter_procfn( slot, dev_getinfo, dev ); - - /* read the POS registers. Most devices only use 2 and 3 */ - pos2 = mca_read_stored_pos( slot, 2 ); - pos3 = mca_read_stored_pos( slot, 3 ); - pos4 = mca_read_stored_pos( slot, 4 ); - pos5 = mca_read_stored_pos( slot, 5 ); - } else { - return -ENODEV; - } - - /* extract configuration from pos[2345] and set everything up */ - -Loadable modules should modify this to test that the specified IRQ and -IO ports (plus whatever other stuff) match. See 3c523.c for example -code (actually, smc-mca.c has a slightly more complex example that can -handle a list of adapter ids). - -Keep in mind that devices should never directly access the POS registers -(via inb(), outb(), etc). While it's generally safe, there is a small -potential for blowing up hardware when it's done at the wrong time. -Furthermore, accessing a POS register disables a device temporarily. -This is usually okay during startup, but do _you_ want to rely on it? -During initial configuration, mca_init() reads all the POS registers -into memory. mca_read_stored_pos() accesses that data. mca_read_pos() -and mca_write_pos() are also available for (safer) direct POS access, -but their use is _highly_ discouraged. mca_write_pos() is particularly -dangerous, as it is possible for adapters to be put in inconsistent -states (i.e. sharing IO address, etc) and may result in crashes, toasted -hardware, and blindness. - -User level drivers (such as the AGX X server) can use /proc/mca/pos to -find adapters (see below). - -Some MCA adapters can also be detected via the usual ISA-style device -probing (many SCSI adapters, for example). This sort of thing is highly -discouraged. Perfectly good information is available telling you what's -there, so there's no excuse for messing with random IO ports. However, -we MCA people still appreciate any ISA-style driver that will work with -our hardware. You take what you can get... - -Level-Triggered Interrupts -========================== - -Because MCA uses level-triggered interrupts, a few problems arise with -what might best be described as the ISA mindset and its effects on -drivers. These sorts of problems are expected to become less common as -more people use shared IRQs on PCI machines. - -In general, an interrupt must be acknowledged not only at the ICU (which -is done automagically by the kernel), but at the device level. In -particular, IRQ 0 must be reset after a timer interrupt (now done in -arch/x86/kernel/time.c) or the first timer interrupt hangs the system. -There were also problems with the 1.3.x floppy drivers, but that seems -to have been fixed. - -IRQs are also shareable, and most MCA-specific devices should be coded -with shared IRQs in mind. - -/proc/mca -========= - -/proc/mca is a directory containing various files for adapters and -other stuff. - - /proc/mca/pos Straight listing of POS registers - /proc/mca/slot[1-8] Information on adapter in specific slot - /proc/mca/video Same for integrated video - /proc/mca/scsi Same for integrated SCSI - /proc/mca/machine Machine information - -See Appendix A for a sample. - -Device drivers can easily add their own information function for -specific slots (including integrated ones) via the -mca_set_adapter_procfn() call. Drivers that support this are ESDI, IBM -SCSI, and 3c523. If a device is also a module, make sure that the proc -function is removed in the module cleanup. This will require storing -the slot information in a private structure somewhere. See the 3c523 -driver for details. - -Your typical proc function will look something like this: - - static int - dev_getinfo( char* buf, int slot, void* d ) { - struct net_device* dev = (struct net_device*) d; - int len = 0; - - len += sprintf( buf+len, "Device: %s\n", dev->name ); - len += sprintf( buf+len, "IRQ: %d\n", dev->irq ); - len += sprintf( buf+len, "IO Port: %#lx-%#lx\n", ... ); - ... - - return len; - } - -Some of the standard MCA information will already be printed, so don't -bother repeating it. Don't try putting in more than 3K of information. - -Enable this function with: - mca_set_adapter_procfn( slot, dev_getinfo, dev ); - -Disable it with: - mca_set_adapter_procfn( slot, NULL, NULL ); - -It is also recommended that, even if you don't write a proc function, to -set the name of the adapter (i.e. "PS/2 ESDI Controller") via -mca_set_adapter_name( int slot, char* name ). - -MCA Device Drivers -================== - -Currently, there are a number of MCA-specific device drivers. - -1) PS/2 SCSI - drivers/scsi/ibmmca.c - drivers/scsi/ibmmca.h - The driver for the IBM SCSI subsystem. Includes both integrated - controllers and adapter cards. May require command-line arg - "ibmmcascsi=io_port" to force detection of an adapter. If you have a - machine with a front-panel display (i.e. model 95), you can use - "ibmmcascsi=display" to enable a drive activity indicator. - -2) 3c523 - drivers/net/3c523.c - drivers/net/3c523.h - 3Com 3c523 Etherlink/MC ethernet driver. - -3) SMC Ultra/MCA and IBM Adapter/A - drivers/net/smc-mca.c - drivers/net/smc-mca.h - Driver for the MCA version of the SMC Ultra and various other - OEM'ed and work-alike cards (Elite, Adapter/A, etc). - -4) NE/2 - driver/net/ne2.c - driver/net/ne2.h - The NE/2 is the MCA version of the NE2000. This may not work - with clones that have a different adapter id than the original - NE/2. - -5) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and - Reply Sound Blaster/SCSI (SCSI part) - Better support for these cards than the driver for ISA. - Supports multiple cards with IRQ sharing. - -Also added boot time option of scsi-probe, which can do reordering of -SCSI host adapters. This will direct the kernel on the order which -SCSI adapter should be detected. Example: - scsi-probe=ibmmca,fd_mcs,adaptec1542,buslogic - -The serial drivers were modified to support the extended IO port range -of the typical MCA system (also #ifdef CONFIG_MCA). - -The following devices work with existing drivers: -1) Token-ring -2) Future Domain SCSI (MCS-600, MCS-700, not MCS-350, OEM'ed IBM SCSI) -3) Adaptec 1640 SCSI (using the aha1542 driver) -4) Bustek/Buslogic SCSI (various) -5) Probably all Arcnet cards. -6) Some, possibly all, MCA IDE controllers. -7) 3Com 3c529 (MCA version of 3c509) (patched) - -8) Intel EtherExpressMC (patched version) - You need to have CONFIG_MCA defined to have EtherExpressMC support. -9) Reply Sound Blaster/SCSI (SB part) (patched version) - -Bugs & Other Weirdness -====================== - -NMIs tend to occur with MCA machines because of various hardware -weirdness, bus timeouts, and many other non-critical things. Some basic -code to handle them (inspired by the NetBSD MCA code) has been added to -detect the guilty device, but it's pretty incomplete. If NMIs are a -persistent problem (on some model 70 or 80s, they occur every couple -shell commands), the CONFIG_IGNORE_NMI flag will take care of that. - -Various Pentium machines have had serious problems with the FPU test in -bugs.h. Basically, the machine hangs after the HLT test. This occurs, -as far as we know, on the Pentium-equipped 85s, 95s, and some PC Servers. -The PCI/MCA PC 750s are fine as far as I can tell. The ``mca-pentium'' -boot-prompt flag will disable the FPU bug check if this is a problem -with your machine. - -The model 80 has a raft of problems that are just too weird and unique -to get into here. Some people have no trouble while others have nothing -but problems. I'd suspect some problems are related to the age of the -average 80 and accompanying hardware deterioration, although others -are definitely design problems with the hardware. Among the problems -include SCSI controller problems, ESDI controller problems, and serious -screw-ups in the floppy controller. Oh, and the parallel port is also -pretty flaky. There were about 5 or 6 different model 80 motherboards -produced to fix various obscure problems. As far as I know, it's pretty -much impossible to tell which bugs a particular model 80 has (other than -triggering them, that is). - -Drivers are required for some MCA memory adapters. If you're suddenly -short a few megs of RAM, this might be the reason. The (I think) Enhanced -Memory Adapter commonly found on the model 70 is one. There's a very -alpha driver floating around, but it's pretty ugly (disassembled from -the DOS driver, actually). See the MCA Linux web page (URL below) -for more current memory info. - -The Thinkpad 700 and 720 will work, but various components are either -non-functional, flaky, or we don't know anything about them. The -graphics controller is supposed to be some WD, but we can't get things -working properly. The PCMCIA slots don't seem to work. Ditto for APM. -The serial ports work, but detection seems to be flaky. - -Credits -======= -A whole pile of people have contributed to the MCA code. I'd include -their names here, but I don't have a list handy. Check the MCA Linux -home page (URL below) for a perpetually out-of-date list. - -===================================================================== -MCA Linux Home Page: http://www.dgmicro.com/mca/ - -Christophe Beauregard -chrisb@truespectra.com -cpbeaure@calum.csclub.uwaterloo.ca - -===================================================================== -Appendix A: Sample /proc/mca - -This is from my model 8595. Slot 1 contains the standard IBM SCSI -adapter, slot 3 is an Adaptec AHA-1640, slot 5 is a XGA-1 video adapter, -and slot 7 is the 3c523 Etherlink/MC. - -/proc/mca/machine: -Model Id: 0xf8 -Submodel Id: 0x14 -BIOS Revision: 0x5 - -/proc/mca/pos: -Slot 1: ff 8e f1 fc a0 ff ff ff IBM SCSI Adapter w/Cache -Slot 2: ff ff ff ff ff ff ff ff -Slot 3: 1f 0f 81 3b bf b6 ff ff -Slot 4: ff ff ff ff ff ff ff ff -Slot 5: db 8f 1d 5e fd c0 00 00 -Slot 6: ff ff ff ff ff ff ff ff -Slot 7: 42 60 ff 08 ff ff ff ff 3Com 3c523 Etherlink/MC -Slot 8: ff ff ff ff ff ff ff ff -Video : ff ff ff ff ff ff ff ff -SCSI : ff ff ff ff ff ff ff ff - -/proc/mca/slot1: -Slot: 1 -Adapter Name: IBM SCSI Adapter w/Cache -Id: 8eff -Enabled: Yes -POS: ff 8e f1 fc a0 ff ff ff -Subsystem PUN: 7 -Detected at boot: Yes - -/proc/mca/slot3: -Slot: 3 -Adapter Name: Unknown -Id: 0f1f -Enabled: Yes -POS: 1f 0f 81 3b bf b6 ff ff - -/proc/mca/slot5: -Slot: 5 -Adapter Name: Unknown -Id: 8fdb -Enabled: Yes -POS: db 8f 1d 5e fd c0 00 00 - -/proc/mca/slot7: -Slot: 7 -Adapter Name: 3Com 3c523 Etherlink/MC -Id: 6042 -Enabled: Yes -POS: 42 60 ff 08 ff ff ff ff -Revision: 0xe -IRQ: 9 -IO Address: 0x3300-0x3308 -Memory: 0xd8000-0xdbfff -Transceiver: External -Device: eth0 -Hardware Address: 02 60 8c 45 c4 2a diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt index 3a0f879533ce..802875413873 100644 --- a/Documentation/media-framework.txt +++ b/Documentation/media-framework.txt @@ -335,6 +335,9 @@ the media_entity pipe field. Calls to media_entity_pipeline_start() can be nested. The pipeline pointer must be identical for all nested calls to the function. +media_entity_pipeline_start() may return an error. In that case, it will +clean up any the changes it did by itself. + When stopping the stream, drivers must notify the entities with media_entity_pipeline_stop(struct media_entity *entity); @@ -351,3 +354,19 @@ If other operations need to be disallowed on streaming entities (such as changing entities configuration parameters) drivers can explicitly check the media_entity stream_count field to find out if an entity is streaming. This operation must be done with the media_device graph_mutex held. + + +Link validation +--------------- + +Link validation is performed by media_entity_pipeline_start() for any +entity which has sink pads in the pipeline. The +media_entity::link_validate() callback is used for that purpose. In +link_validate() callback, entity driver should check that the properties of +the source pad of the connected entity and its own sink pad match. It is up +to the type of the entity (and in the end, the properties of the hardware) +what matching actually means. + +Subsystems should facilitate link validation by providing subsystem specific +helper functions to provide easy access for commonly needed information, and +in the end provide a way to use driver-specific callbacks. diff --git a/Documentation/nfc/nfc-hci.txt b/Documentation/nfc/nfc-hci.txt index 216b7254fcc3..320f9336c781 100644 --- a/Documentation/nfc/nfc-hci.txt +++ b/Documentation/nfc/nfc-hci.txt @@ -22,9 +22,9 @@ response to arrive. HCI events can also be received from the host controller. They will be handled and a translation will be forwarded to NFC Core as needed. HCI uses 2 execution contexts: -- one if for executing commands : nfc_hci_msg_tx_work(). Only one command +- one for executing commands : nfc_hci_msg_tx_work(). Only one command can be executing at any given moment. -- one if for dispatching received events and responses : nfc_hci_msg_rx_work() +- one for dispatching received events and commands : nfc_hci_msg_rx_work(). HCI Session initialization: --------------------------- @@ -52,18 +52,42 @@ entry points: struct nfc_hci_ops { int (*open)(struct nfc_hci_dev *hdev); void (*close)(struct nfc_hci_dev *hdev); + int (*hci_ready) (struct nfc_hci_dev *hdev); int (*xmit)(struct nfc_hci_dev *hdev, struct sk_buff *skb); int (*start_poll)(struct nfc_hci_dev *hdev, u32 protocols); int (*target_from_gate)(struct nfc_hci_dev *hdev, u8 gate, struct nfc_target *target); + int (*complete_target_discovered) (struct nfc_hci_dev *hdev, u8 gate, + struct nfc_target *target); + int (*data_exchange) (struct nfc_hci_dev *hdev, + struct nfc_target *target, + struct sk_buff *skb, struct sk_buff **res_skb); + int (*check_presence)(struct nfc_hci_dev *hdev, + struct nfc_target *target); }; -open() and close() shall turn the hardware on and off. xmit() shall simply -write a frame to the chip. start_poll() is an optional entrypoint that shall -set the hardware in polling mode. This must be implemented only if the hardware -uses proprietary gates or a mechanism slightly different from the HCI standard. -target_from_gate() is another optional entrypoint to return the protocols +- open() and close() shall turn the hardware on and off. +- hci_ready() is an optional entry point that is called right after the hci +session has been set up. The driver can use it to do additional initialization +that must be performed using HCI commands. +- xmit() shall simply write a frame to the chip. +- start_poll() is an optional entrypoint that shall set the hardware in polling +mode. This must be implemented only if the hardware uses proprietary gates or a +mechanism slightly different from the HCI standard. +- target_from_gate() is an optional entrypoint to return the nfc protocols corresponding to a proprietary gate. +- complete_target_discovered() is an optional entry point to let the driver +perform additional proprietary processing necessary to auto activate the +discovered target. +- data_exchange() must be implemented by the driver if proprietary HCI commands +are required to send data to the tag. Some tag types will require custom +commands, others can be written to using the standard HCI commands. The driver +can check the tag type and either do proprietary processing, or return 1 to ask +for standard processing. +- check_presence() is an optional entry point that will be called regularly +by the core to check that an activated tag is still in the field. If this is +not implemented, the core will not be able to push tag_lost events to the user +space On the rx path, the driver is responsible to push incoming HCP frames to HCI using nfc_hci_recv_frame(). HCI will take care of re-aggregation and handling @@ -99,7 +123,8 @@ fast, cannot sleep. stores incoming frames into an shdlc rx queue handles shdlc rx & tx queues. Dispatches HCI cmd responses. - HCI Tx Cmd worker (MSGTXWQ) -Serialize execution of HCI commands. Complete execution in case of resp timeout. +Serializes execution of HCI commands. Completes execution in case of response +timeout. - HCI Rx worker (MSGRXWQ) Dispatches incoming HCI commands or events. @@ -133,11 +158,11 @@ able to complete the command with a timeout error if no response arrive. SMW context gets scheduled and invokes nfc_shdlc_sm_work(). This function handles shdlc framing in and out. It uses the driver xmit to send frames and receives incoming frames in an skb queue filled from the driver IRQ handler. -SHDLC I(nformation) frames payload are HCP fragments. They are agregated to +SHDLC I(nformation) frames payload are HCP fragments. They are aggregated to form complete HCI frames, which can be a response, command, or event. HCI Responses are dispatched immediately from this context to unblock -waiting command execution. Reponse processing involves invoking the completion +waiting command execution. Response processing involves invoking the completion callback that was provided by nfc_hci_msg_tx_work() when it sent the command. The completion callback will then wake the syscall context. diff --git a/Documentation/power/suspend-and-cpuhotplug.txt b/Documentation/power/suspend-and-cpuhotplug.txt index f28f9a6f0347..e13dafc8e8f1 100644 --- a/Documentation/power/suspend-and-cpuhotplug.txt +++ b/Documentation/power/suspend-and-cpuhotplug.txt @@ -29,7 +29,7 @@ More details follow: Write 'mem' to /sys/power/state - syfs file + sysfs file | v Acquire pm_mutex lock diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX index b7dd6502bec5..9b0787f965e9 100644 --- a/Documentation/scsi/00-INDEX +++ b/Documentation/scsi/00-INDEX @@ -56,8 +56,6 @@ g_NCR5380.txt - info on driver for NCR5380 and NCR53c400 based adapters hptiop.txt - HIGHPOINT ROCKETRAID 3xxx RAID DRIVER -ibmmca.txt - - info on driver for IBM adapters with MCA bus in2000.txt - info on in2000 driver libsas.txt diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt deleted file mode 100644 index ac41a9fcac77..000000000000 --- a/Documentation/scsi/ibmmca.txt +++ /dev/null @@ -1,1402 +0,0 @@ - - -=< The IBM Microchannel SCSI-Subsystem >=- - - for the IBM PS/2 series - - Low Level Software-Driver for Linux - - Copyright (c) 1995 Strom Systems, Inc. under the terms of the GNU - General Public License. Originally written by Martin Kolinek, December 1995. - Officially modified and maintained by Michael Lang since January 1999. - - Version 4.0a - - Last update: January 3, 2001 - - Before you Start - ---------------- - This is the common README.ibmmca file for all driver releases of the - IBM MCA SCSI driver for Linux. Please note, that driver releases 4.0 - or newer do not work with kernel versions older than 2.4.0, while driver - versions older than 4.0 do not work with kernels 2.4.0 or later! If you - try to compile your kernel with the wrong driver source, the - compilation is aborted and you get a corresponding error message. This is - no bug in the driver; it prevents you from using the wrong source code - with the wrong kernel version. - - Authors of this Driver - ---------------------- - - Chris Beauregard (improvement of the SCSI-device mapping by the driver) - - Martin Kolinek (origin, first release of this driver) - - Klaus Kudielka (multiple SCSI-host management/detection, adaption to - Linux Kernel 2.1.x, module support) - - Michael Lang (assigning original pun/lun mapping, dynamical ldn - assignment, rewritten adapter detection, this file, - patches, official driver maintenance and subsequent - debugging, related with the driver) - - Table of Contents - ----------------- - 1 Abstract - 2 Driver Description - 2.1 IBM SCSI-Subsystem Detection - 2.2 Physical Units, Logical Units, and Logical Devices - 2.3 SCSI-Device Recognition and dynamical ldn Assignment - 2.4 SCSI-Device Order - 2.5 Regular SCSI-Command-Processing - 2.6 Abort & Reset Commands - 2.7 Disk Geometry - 2.8 Kernel Boot Option - 2.9 Driver Module Support - 2.10 Multiple Hostadapter Support - 2.11 /proc/scsi-Filesystem Information - 2.12 /proc/mca-Filesystem Information - 2.13 Supported IBM SCSI-Subsystems - 2.14 Linux Kernel Versions - 3 Code History - 4 To do - 5 Users' Manual - 5.1 Commandline Parameters - 5.2 Troubleshooting - 5.3 Bug reports - 5.4 Support WWW-page - 6 References - 7 Credits to - 7.1 People - 7.2 Sponsors & Supporters - 8 Trademarks - 9 Disclaimer - - * * * - - 1 Abstract - ---------- - This README-file describes the IBM SCSI-subsystem low level driver for - Linux. The descriptions which were formerly kept in the source code have - been taken out of this file to simplify the codes readability. The driver - description has been updated, as most of the former description was already - quite outdated. The history of the driver development is also kept inside - here. Multiple historical developments have been summarized to shorten the - text size a bit. At the end of this file you can find a small manual for - this driver and hints to get it running on your machine. - - 2 Driver Description - -------------------- - 2.1 IBM SCSI-Subsystem Detection - -------------------------------- - This is done in the ibmmca_detect() function. It first checks, if the - Microchannel-bus support is enabled, as the IBM SCSI-subsystem needs the - Microchannel. In a next step, a free interrupt is chosen and the main - interrupt handler is connected to it to handle answers of the SCSI- - subsystem(s). If the F/W SCSI-adapter is forced by the BIOS to use IRQ11 - instead of IRQ14, IRQ11 is used for the IBM SCSI-2 F/W adapter. In a - further step it is checked, if the adapter gets detected by force from - the kernel commandline, where the I/O port and the SCSI-subsystem id can - be specified. The next step checks if there is an integrated SCSI-subsystem - installed. This register area is fixed through all IBM PS/2 MCA-machines - and appears as something like a virtual slot 10 of the MCA-bus. On most - PS/2 machines, the POS registers of slot 10 are set to 0xff or 0x00 if not - integrated SCSI-controller is available. But on certain PS/2s, like model - 9595, this slot 10 is used to store other information which at earlier - stage confused the driver and resulted in the detection of some ghost-SCSI. - If POS-register 2 and 3 are not 0x00 and not 0xff, but all other POS - registers are either 0xff or 0x00, there must be an integrated SCSI- - subsystem present and it will be registered as IBM Integrated SCSI- - Subsystem. The next step checks, if there is a slot-adapter installed on - the MCA-bus. To get this, the first two POS-registers, that represent the - adapter ID are checked. If they fit to one of the ids, stored in the - adapter list, a SCSI-subsystem is assumed to be found in a slot and will be - registered. This check is done through all possible MCA-bus slots to allow - more than one SCSI-adapter to be present in the PS/2-system and this is - already the first point of problems. Looking into the technical reference - manual for the IBM PS/2 common interfaces, the POS2 register must have - different interpretation of its single bits to avoid overlapping I/O - regions. While one can assume, that the integrated subsystem has a fix - I/O-address at 0x3540 - 0x3547, further installed IBM SCSI-adapters must - use a different I/O-address. This is expressed by bit 1 to 3 of POS2 - (multiplied by 8 + 0x3540). Bits 2 and 3 are reserved for the integrated - subsystem, but not for the adapters! The following list shows, how the - bits of POS2 and POS3 should be interpreted. - - The POS2-register of all PS/2 models' integrated SCSI-subsystems has the - following interpretation of bits: - Bit 7 - 4 : Chip Revision ID (Release) - Bit 3 - 2 : Reserved - Bit 1 : 8k NVRAM Disabled - Bit 0 : Chip Enable (EN-Signal) - The POS3-register is interpreted as follows (for most IBM SCSI-subsys.): - Bit 7 - 5 : SCSI ID - Bit 4 - 0 : Reserved = 0 - The slot-adapters have different interpretation of these bits. The IBM SCSI - adapter (w/Cache) and the IBM SCSI-2 F/W adapter use the following - interpretation of the POS2 register: - Bit 7 - 4 : ROM Segment Address Select - Bit 3 - 1 : Adapter I/O Address Select (*8+0x3540) - Bit 0 : Adapter Enable (EN-Signal) - and for the POS3 register: - Bit 7 - 5 : SCSI ID - Bit 4 : Fairness Enable (SCSI ID3 f. F/W) - Bit 3 - 0 : Arbitration Level - The most modern product of the series is the IBM SCSI-2 F/W adapter, it - allows dual-bus SCSI and SCSI-wide addressing, which means, PUNs may be - between 0 and 15. Here, Bit 4 is the high-order bit of the 4-bit wide - adapter PUN expression. In short words, this means, that IBM PS/2 machines - can only support 1 single integrated subsystem by default. Additional - slot-adapters get ports assigned by the automatic configuration tool. - - One day I found a patch in ibmmca_detect(), forcing the I/O-address to be - 0x3540 for integrated SCSI-subsystems, there was a remark placed, that on - integrated IBM SCSI-subsystems of model 56, the POS2 register was showing 5. - This means, that really for these models, POS2 has to be interpreted - sticking to the technical reference guide. In this case, the bit 2 (4) is - a reserved bit and may not be interpreted. These differences between the - adapters and the integrated controllers are taken into account by the - detection routine of the driver on from version >3.0g. - - Every time, a SCSI-subsystem is discovered, the ibmmca_register() function - is called. This function checks first, if the requested area for the I/O- - address of this SCSI-subsystem is still available and assigns this I/O- - area to the SCSI-subsystem. There are always 8 sequential I/O-addresses - taken for each individual SCSI-subsystem found, which are: - - Offset Type Permissions - 0 Command Interface Register 1 Read/Write - 1 Command Interface Register 2 Read/Write - 2 Command Interface Register 3 Read/Write - 3 Command Interface Register 4 Read/Write - 4 Attention Register Read/Write - 5 Basic Control Register Read/Write - 6 Interrupt Status Register Read - 7 Basic Status Register Read - - After the I/O-address range is assigned, the host-adapter is assigned - to a local structure which keeps all adapter information needed for the - driver itself and the mid- and higher-level SCSI-drivers. The SCSI pun/lun - and the adapters' ldn tables are initialized and get probed afterwards by - the check_devices() function. If no further adapters are found, - ibmmca_detect() quits. - - 2.2 Physical Units, Logical Units, and Logical Devices - ------------------------------------------------------ - There can be up to 56 devices on the SCSI bus (besides the adapter): - there are up to 7 "physical units" (each identified by physical unit - number or pun, also called the scsi id, this is the number you select - with hardware jumpers), and each physical unit can have up to 8 - "logical units" (each identified by logical unit number, or lun, - between 0 and 7). The IBM SCSI-2 F/W adapter offers this on up to two - busses and provides support for 30 logical devices at the same time, where - in wide-addressing mode you can have 16 puns with 32 luns on each device. - This section describes the handling of devices on non-F/W adapters. - Just imagine, that you can have 16 * 32 = 512 devices on a F/W adapter - which means a lot of possible devices for such a small machine. - - Typically the adapter has pun=7, so puns of other physical units - are between 0 and 6(15). On a wide-adapter a pun higher than 7 is - possible, but is normally not used. Almost all physical units have only - one logical unit, with lun=0. A CD-ROM jukebox would be an example of a - physical unit with more than one logical unit. - - The embedded microprocessor of the IBM SCSI-subsystem hides the complex - two-dimensional (pun,lun) organization from the operating system. - When the machine is powered-up (or rebooted), the embedded microprocessor - checks, on its own, all 56 possible (pun,lun) combinations, and the first - 15 devices found are assigned into a one-dimensional array of so-called - "logical devices", identified by "logical device numbers" or ldn. The last - ldn=15 is reserved for the subsystem itself. Wide adapters may have - to check up to 15 * 8 = 120 pun/lun combinations. - - 2.3 SCSI-Device Recognition and Dynamical ldn Assignment - -------------------------------------------------------- - One consequence of information hiding is that the real (pun,lun) - numbers are also hidden. The two possibilities to get around this problem - are to offer fake pun/lun combinations to the operating system or to - delete the whole mapping of the adapter and to reassign the ldns, using - the immediate assign command of the SCSI-subsystem for probing through - all possible pun/lun combinations. An ldn is a "logical device number" - which is used by IBM SCSI-subsystems to access some valid SCSI-device. - At the beginning of the development of this driver, the following approach - was used: - - First, the driver checked the ldn's (0 to 6) to find out which ldn's - have devices assigned. This was done by the functions check_devices() and - device_exists(). The interrupt handler has a special paragraph of code - (see local_checking_phase_flag) to assist in the checking. Assume, for - example, that three logical devices were found assigned at ldn 0, 1, 2. - These are presented to the upper layer of Linux SCSI driver - as devices with bogus (pun, lun) equal to (0,0), (1,0), (2,0). - On the other hand, if the upper layer issues a command to device - say (4,0), this driver returns DID_NO_CONNECT error. - - In a second step of the driver development, the following improvement has - been applied: The first approach limited the number of devices to 7, far - fewer than the 15 that it could use, then it just mapped ldn -> - (ldn/8,ldn%8) for pun,lun. We ended up with a real mishmash of puns - and luns, but it all seemed to work. - - The latest development, which is implemented from the driver version 3.0 - and later, realizes the device recognition in the following way: - The physical SCSI-devices on the SCSI-bus are probed via immediate_assign- - and device_inquiry-commands, that is all implemented in a completely new - made check_devices() subroutine. This delivers an exact map of the physical - SCSI-world that is now stored in the get_scsi[][]-array. This means, - that the once hidden pun,lun assignment is now known to this driver. - It no longer believes in default-settings of the subsystem and maps all - ldns to existing pun,lun "by foot". This assures full control of the ldn - mapping and allows dynamical remapping of ldns to different pun,lun, if - there are more SCSI-devices installed than ldns available (n>15). The - ldns from 0 to 6 get 'hardwired' by this driver to puns 0 to 7 at lun=0, - excluding the pun of the subsystem. This assures, that at least simple - SCSI-installations have optimum access-speed and are not touched by - dynamical remapping. The ldns 7 to 14 are put to existing devices with - lun>0 or to non-existing devices, in order to satisfy the subsystem, if - there are less than 15 SCSI-devices connected. In the case of more than 15 - devices, the dynamical mapping goes active. If the get_scsi[][] reports a - device to be existent, but it has no ldn assigned, it gets an ldn out of 7 - to 14. The numbers are assigned in cyclic order, therefore it takes 8 - dynamical reassignments on the SCSI-devices until a certain device - loses its ldn again. This assures that dynamical remapping is avoided - during intense I/O between up to 15 SCSI-devices (means pun,lun - combinations). A further advantage of this method is that people who - build their kernel without probing on all luns will get what they expect, - because the driver just won't assign everything with lun>0 when - multiple lun probing is inactive. - - 2.4 SCSI-Device Order - --------------------- - Because of the now correct recognition of physical pun,lun, and - their report to mid-level- and higher-level-drivers, the new reported puns - can be different from the old, faked puns. Therefore, Linux will eventually - change /dev/sdXXX assignments and prompt you for corrupted superblock - repair on boottime. In this case DO NOT PANIC, YOUR DISKS ARE STILL OK!!! - You have to reboot (CTRL-D) with an old kernel and set the /etc/fstab-file - entries right. After that, the system should come up as errorfree as before. - If your boot-partition is not coming up, also edit the /etc/lilo.conf-file - in a Linux session booted on old kernel and run lilo before reboot. Check - lilo.conf anyway to get boot on other partitions with foreign OSes right - again. But there exists a feature of this driver that allows you to change - the assignment order of the SCSI-devices by flipping the PUN-assignment. - See the next paragraph for a description. - - The problem for this is, that Linux does not assign the SCSI-devices in the - way as described in the ANSI-SCSI-standard. Linux assigns /dev/sda to - the device with at minimum id 0. But the first drive should be at id 6, - because for historical reasons, drive at id 6 has, by hardware, the highest - priority and a drive at id 0 the lowest. IBM was one of the rare producers, - where the BIOS assigns drives belonging to the ANSI-SCSI-standard. Most - other producers' BIOS does not (I think even Adaptec-BIOS). The - IBMMCA_SCSI_ORDER_STANDARD flag, which you set while configuring the - kernel enables to choose the preferred way of SCSI-device-assignment. - Defining this flag would result in Linux determining the devices in the - same order as DOS and OS/2 does on your MCA-machine. This is also standard - on most industrial computers and OSes, like e.g. OS-9. Leaving this flag - undefined will get your devices ordered in the default way of Linux. See - also the remarks of Chris Beauregard from Dec 15, 1997 and the followups - in section 3. - - 2.5 Regular SCSI-Command-Processing - ----------------------------------- - Only three functions get involved: ibmmca_queuecommand(), issue_cmd(), - and interrupt_handler(). - - The upper layer issues a scsi command by calling function - ibmmca_queuecommand(). This function fills a "subsystem control block" - (scb) and calls a local function issue_cmd(), which writes a scb - command into subsystem I/O ports. Once the scb command is carried out, - the interrupt_handler() is invoked. If a device is determined to be - existent and it has not assigned any ldn, it gets one dynamically. - For this, the whole stuff is done in ibmmca_queuecommand(). - - 2.6 Abort & Reset Commands - -------------------------- - These are implemented with busy waiting for interrupt to arrive. - ibmmca_reset() and ibmmca_abort() do not work sufficiently well - up to now and need still a lot of development work. This seems - to be a problem with other low-level SCSI drivers too, however - this should be no excuse. - - 2.7 Disk Geometry - ----------------- - The ibmmca_biosparams() function should return the same disk geometry - as the bios. This is needed for fdisk, etc. The returned geometry is - certainly correct for disks smaller than 1 gigabyte. In the meantime, - it has been proved, that this works fine even with disks larger than - 1 gigabyte. - - 2.8 Kernel Boot Option - ---------------------- - The function ibmmca_scsi_setup() is called if option ibmmcascsi=n - is passed to the kernel. See file linux/init/main.c for details. - - 2.9 Driver Module Support - ------------------------- - Is implemented and tested by K. Kudielka. This could probably not work - on kernels <2.1.0. - - 2.10 Multiple Hostadapter Support - --------------------------------- - This driver supports up to eight interfaces of type IBM-SCSI-Subsystem. - Integrated-, and MCA-adapters are automatically recognized. Unrecognizable - IBM-SCSI-Subsystem interfaces can be specified as kernel-parameters. - - 2.11 /proc/scsi-Filesystem Information - -------------------------------------- - Information about the driver condition is given in - /proc/scsi/ibmmca/<host_no>. ibmmca_proc_info() provides this information. - - This table is quite informative for interested users. It shows the load - of commands on the subsystem and whether you are running the bypassed - (software) or integrated (hardware) SCSI-command set (see below). The - amount of accesses is shown. Read, write, modeselect is shown separately - in order to help debugging problems with CD-ROMs or tapedrives. - - The following table shows the list of 15 logical device numbers, that are - used by the SCSI-subsystem. The load on each ldn is shown in the table, - again, read and write commands are split. The last column shows the amount - of reassignments, that have been applied to the ldns, if you have more than - 15 pun/lun combinations available on the SCSI-bus. - - The last two tables show the pun/lun map and the positions of the ldns - on this pun/lun map. This may change during operation, when a ldn is - reassigned to another pun/lun combination. If the necessity for dynamical - assignments is set to 'no', the ldn structure keeps static. - - 2.12 /proc/mca-Filesystem Information - ------------------------------------- - The slot-file contains all default entries and in addition chip and I/O- - address information of the SCSI-subsystem. This information is provided - by ibmmca_getinfo(). - - 2.13 Supported IBM SCSI-Subsystems - ---------------------------------- - The following IBM SCSI-subsystems are supported by this driver: - - - IBM Fast/Wide SCSI-2 Adapter - - IBM 7568 Industrial Computer SCSI Adapter w/Cache - - IBM Expansion Unit SCSI Controller - - IBM SCSI Adapter w/Cache - - IBM SCSI Adapter - - IBM Integrated SCSI Controller - - All clones, 100% compatible with the chipset and subsystem command - system of IBM SCSI-adapters (forced detection) - - 2.14 Linux Kernel Versions - -------------------------- - The IBM SCSI-subsystem low level driver is prepared to be used with - all versions of Linux between 2.0.x and 2.4.x. The compatibility checks - are fully implemented up from version 3.1e of the driver. This means, that - you just need the latest ibmmca.h and ibmmca.c file and copy it in the - linux/drivers/scsi directory. The code is automatically adapted during - kernel compilation. This is different from kernel 2.4.0! Here version - 4.0 or later of the driver must be used for kernel 2.4.0 or later. Version - 4.0 or later does not work together with older kernels! Driver versions - older than 4.0 do not work together with kernel 2.4.0 or later. They work - on all older kernels. - - 3 Code History - -------------- - Jan 15 1996: First public release. - - Martin Kolinek - - Jan 23 1996: Scrapped code which reassigned scsi devices to logical - device numbers. Instead, the existing assignment (created - when the machine is powered-up or rebooted) is used. - A side effect is that the upper layer of Linux SCSI - device driver gets bogus scsi ids (this is benign), - and also the hard disks are ordered under Linux the - same way as they are under dos (i.e., C: disk is sda, - D: disk is sdb, etc.). - - Martin Kolinek - - I think that the CD-ROM is now detected only if a CD is - inside CD_ROM while Linux boots. This can be fixed later, - once the driver works on all types of PS/2's. - - Martin Kolinek - - Feb 7 1996: Modified biosparam function. Fixed the CD-ROM detection. - For now, devices other than harddisk and CD_ROM are - ignored. Temporarily modified abort() function - to behave like reset(). - - Martin Kolinek - - Mar 31 1996: The integrated scsi subsystem is correctly found - in PS/2 models 56,57, but not in model 76. Therefore - the ibmmca_scsi_setup() function has been added today. - This function allows the user to force detection of - scsi subsystem. The kernel option has format - ibmmcascsi=n - where n is the scsi_id (pun) of the subsystem. Most likely, n is 7. - - Martin Kolinek - - Aug 21 1996: Modified the code which maps ldns to (pun,0). It was - insufficient for those of us with CD-ROM changers. - - Chris Beauregard - - Dec 14 1996: More improvements to the ldn mapping. See check_devices - for details. Did more fiddling with the integrated SCSI detection, - but I think it's ultimately hopeless without actually testing the - model of the machine. The 56, 57, 76 and 95 (ultimedia) all have - different integrated SCSI register configurations. However, the 56 - and 57 are the only ones that have problems with forced detection. - - Chris Beauregard - - Mar 8-16 1997: Modified driver to run as a module and to support - multiple adapters. A structure, called ibmmca_hostdata, is now - present, containing all the variables, that were once only - available for one single adapter. The find_subsystem-routine has vanished. - The hardware recognition is now done in ibmmca_detect directly. - This routine checks for presence of MCA-bus, checks the interrupt - level and continues with checking the installed hardware. - Certain PS/2-models do not recognize a SCSI-subsystem automatically. - Hence, the setup defined by command-line-parameters is checked first. - Thereafter, the routine probes for an integrated SCSI-subsystem. - Finally, adapters are checked. This method has the advantage to cover all - possible combinations of multiple SCSI-subsystems on one MCA-board. Up to - eight SCSI-subsystems can be recognized and announced to the upper-level - drivers with this improvement. A set of defines made changes to other - routines as small as possible. - - Klaus Kudielka - - May 30 1997: (v1.5b) - 1) SCSI-command capability enlarged by the recognition of MODE_SELECT. - This needs the RD-Bit to be disabled on IM_OTHER_SCSI_CMD_CMD which - allows data to be written from the system to the device. It is a - necessary step to be allowed to set blocksize of SCSI-tape-drives and - the tape-speed, without confusing the SCSI-Subsystem. - 2) The recognition of a tape is included in the check_devices routine. - This is done by checking for TYPE_TAPE, that is already defined in - the kernel-scsi-environment. The markup of a tape is done in the - global ldn_is_tape[] array. If the entry on index ldn - is 1, there is a tapedrive connected. - 3) The ldn_is_tape[] array is necessary to distinguish between tape- and - other devices. Fixed blocklength devices should not cause a problem - with the SCB-command for read and write in the ibmmca_queuecommand - subroutine. Therefore, I only derivate the READ_XX, WRITE_XX for - the tape-devices, as recommended by IBM in this Technical Reference, - mentioned below. (IBM recommends to avoid using the read/write of the - subsystem, but the fact was, that read/write causes a command error from - the subsystem and this causes kernel-panic.) - 4) In addition, I propose to use the ldn instead of a fix char for the - display of PS2_DISK_LED_ON(). On 95, one can distinguish between the - devices that are accessed. It shows activity and easyfies debugging. - The tape-support has been tested with a SONY SDT-5200 and a HP DDS-2 - (I do not know yet the type). Optimization and CD-ROM audio-support, - I am working on ... - - Michael Lang - - June 19 1997: (v1.6b) - 1) Submitting the extra-array ldn_is_tape[] -> to the local ld[] - device-array. - 2) CD-ROM Audio-Play seems to work now. - 3) When using DDS-2 (120M) DAT-Tapes, mtst shows still density-code - 0x13 for ordinary DDS (61000 BPM) instead 0x24 for DDS-2. This appears - also on Adaptec 2940 adaptor in a PCI-System. Therefore, I assume that - the problem is independent of the low-level-driver/bus-architecture. - 4) Hexadecimal ldn on PS/2-95 LED-display. - 5) Fixing of the PS/2-LED on/off that it works right with tapedrives and - does not confuse the disk_rw_in_progress counter. - - Michael Lang - - June 21 1997: (v1.7b) - 1) Adding of a proc_info routine to inform in /proc/scsi/ibmmca/<host> the - outer-world about operational load statistics on the different ldns, - seen by the driver. Everybody that has more than one IBM-SCSI should - test this, because I only have one and cannot see what happens with more - than one IBM-SCSI hosts. - 2) Definition of a driver version-number to have a better recognition of - the source when there are existing too much releases that may confuse - the user, when reading about release-specific problems. Up to know, - I calculated the version-number to be 1.7. Because we are in BETA-test - yet, it is today 1.7b. - 3) Sorry for the heavy bug I programmed on June 19 1997! After that, the - CD-ROM did not work any more! The C7-command was a fake impression - I got while programming. Now, the READ and WRITE commands for CD-ROM are - no longer running over the subsystem, but just over - IM_OTHER_SCSI_CMD_CMD. On my observations (PS/2-95), now CD-ROM mounts - much faster(!) and hopefully all fancy multimedia-functions, like direct - digital recording from audio-CDs also work. (I tried it with cdda2wav - from the cdwtools-package and it filled up the harddisk immediately :-).) - To easify boolean logics, a further local device-type in ld[], called - is_cdrom has been included. - 4) If one uses a SCSI-device of unsupported type/commands, one - immediately runs into a kernel-panic caused by Command Error. To better - understand which SCSI-command caused the problem, I extended this - specific panic-message slightly. - - Michael Lang - - June 25 1997: (v1.8b) - 1) Some cosmetic changes for the handling of SCSI-device-types. - Now, also CD-Burners / WORMs and SCSI-scanners should work. For - MO-drives I have no experience, therefore not yet supported. - In logical_devices I changed from different type-variables to one - called 'device_type' where the values, corresponding to scsi.h, - of a SCSI-device are stored. - 2) There existed a small bug, that maps a device, coming after a SCSI-tape - wrong. Therefore, e.g. a CD-ROM changer would have been mapped wrong - -> problem removed. - 3) Extension of the logical_device structure. Now it contains also device, - vendor and revision-level of a SCSI-device for internal usage. - - Michael Lang - - June 26-29 1997: (v2.0b) - 1) The release number 2.0b is necessary because of the completely new done - recognition and handling of SCSI-devices with the adapter. As I got - from Chris the hint, that the subsystem can reassign ldns dynamically, - I remembered this immediate_assign-command, I found once in the handbook. - Now, the driver first kills all ldn assignments that are set by default - on the SCSI-subsystem. After that, it probes on all puns and luns for - devices by going through all combinations with immediate_assign and - probing for devices, using device_inquiry. The found physical(!) pun,lun - structure is stored in get_scsi[][] as device types. This is followed - by the assignment of all ldns to existing SCSI-devices. If more ldns - than devices are available, they are assigned to non existing pun,lun - combinations to satisfy the adapter. With this, the dynamical mapping - was possible to implement. (For further info see the text in the - source code and in the description below. Read the description - below BEFORE installing this driver on your system!) - 2) Changed the name IBMMCA_DRIVER_VERSION to IBMMCA_SCSI_DRIVER_VERSION. - 3) The LED-display shows on PS/2-95 no longer the ldn, but the SCSI-ID - (pun) of the accessed SCSI-device. This is now senseful, because the - pun known within the driver is exactly the pun of the physical device - and no longer a fake one. - 4) The /proc/scsi/ibmmca/<host_no> consists now of the first part, where - hit-statistics of ldns is shown and a second part, where the maps of - physical and logical SCSI-devices are displayed. This could be very - interesting, when one is using more than 15 SCSI-devices in order to - follow the dynamical remapping of ldns. - - Michael Lang - - June 26-29 1997: (v2.0b-1) - 1) I forgot to switch the local_checking_phase_flag to 1 and back to 0 - in the dynamical remapping part in ibmmca_queuecommand for the - device_exist routine. Sorry. - - Michael Lang - - July 1-13 1997: (v3.0b,c) - 1) Merging of the driver-developments of Klaus Kudielka and Michael Lang - in order to get a optimum and unified driver-release for the - IBM-SCSI-Subsystem-Adapter(s). - For people, using the Kernel-release >=2.1.0, module-support should - be no problem. For users, running under <2.1.0, module-support may not - work, because the methods have changed between 2.0.x and 2.1.x. - 2) Added some more effective statistics for /proc-output. - 3) Change typecasting at necessary points from (unsigned long) to - virt_to_bus(). - 4) Included #if... at special points to have specific adaption of the - driver to kernel 2.0.x and 2.1.x. It should therefore also run with - later releases. - 5) Magneto-Optical drives and medium-changers are also recognized, now. - Therefore, we have a completely gapfree recognition of all SCSI- - device-types, that are known by Linux up to kernel 2.1.31. - 6) The flag SCSI_IBMMCA_DEV_RESET has been inserted. If it is set within - the configuration, each connected SCSI-device will get a reset command - during boottime. This can be necessary for some special SCSI-devices. - This flag should be included in Config.in. - (See also the new Config.in file.) - Probable next improvement: bad disk handler. - - Michael Lang - - Sept 14 1997: (v3.0c) - 1) Some debugging and speed optimization applied. - - Michael Lang - - Dec 15, 1997 - - chrisb@truespectra.com - - made the front panel display thingy optional, specified from the - command-line via ibmmcascsi=display. Along the lines of the /LED - option for the OS/2 driver. - - fixed small bug in the LED display that would hang some machines. - - reversed ordering of the drives (using the - IBMMCA_SCSI_ORDER_STANDARD define). This is necessary for two main - reasons: - - users who've already installed Linux won't be screwed. Keep - in mind that not everyone is a kernel hacker. - - be consistent with the BIOS ordering of the drives. In the - BIOS, id 6 is C:, id 0 might be D:. With this scheme, they'd be - backwards. This confuses the crap out of those heathens who've - got a impure Linux installation (which, <wince>, I'm one of). - This whole problem arises because IBM is actually non-standard with - the id to BIOS mappings. You'll find, in fdomain.c, a similar - comment about a few FD BIOS revisions. The Linux (and apparently - industry) standard is that C: maps to scsi id (0,0). Let's stick - with that standard. - - Since this is technically a branch of my own, I changed the - version number to 3.0e-cpb. - - Jan 17, 1998: (v3.0f) - 1) Addition of some statistical info for /proc in proc_info. - 2) Taking care of the SCSI-assignment problem, dealed by Chris at Dec 15 - 1997. In fact, IBM is right, concerning the assignment of SCSI-devices - to driveletters. It is conform to the ANSI-definition of the SCSI- - standard to assign drive C: to SCSI-id 6, because it is the highest - hardware priority after the hostadapter (that has still today by - default everywhere id 7). Also realtime-operating systems that I use, - like LynxOS and OS9, which are quite industrial systems use top-down - numbering of the harddisks, that is also starting at id 6. Now, one - sits a bit between two chairs. On one hand side, using the define - IBMMCA_SCSI_ORDER_STANDARD makes Linux assigning disks conform to - the IBM- and ANSI-SCSI-standard and keeps this driver downward - compatible to older releases, on the other hand side, people is quite - habituated in believing that C: is assigned to (0,0) and much other - SCSI-BIOS do so. Therefore, I moved the IBMMCA_SCSI_ORDER_STANDARD - define out of the driver and put it into Config.in as subitem of - 'IBM SCSI support'. A help, added to Documentation/Configure.help - explains the differences between saying 'y' or 'n' to the user, when - IBMMCA_SCSI_ORDER_STANDARD prompts, so the ordinary user is enabled to - choose the way of assignment, depending on his own situation and gusto. - 3) Adapted SCSI_IBMMCA_DEV_RESET to the local naming convention, so it is - now called IBMMCA_SCSI_DEV_RESET. - 4) Optimization of proc_info and its subroutines. - 5) Added more in-source-comments and extended the driver description by - some explanation about the SCSI-device-assignment problem. - - Michael Lang - - Jan 18, 1998: (v3.0g) - 1) Correcting names to be absolutely conform to the later 2.1.x releases. - This is necessary for - IBMMCA_SCSI_DEV_RESET -> CONFIG_IBMMCA_SCSI_DEV_RESET - IBMMCA_SCSI_ORDER_STANDARD -> CONFIG_IBMMCA_SCSI_ORDER_STANDARD - - Michael Lang - - Jan 18, 1999: (v3.1 MCA-team internal) - 1) The multiple hosts structure is accessed from every subroutine, so there - is no longer the address of the device structure passed from function - to function, but only the hostindex. A call by value, nothing more. This - should really be understood by the compiler and the subsystem should get - the right values and addresses. - 2) The SCSI-subsystem detection was not complete and quite hugely buggy up - to now, compared to the technical manual. The interpretation of the pos2 - register is not as assumed by people before, therefore, I dropped a note - in the ibmmca_detect function to show the registers' interpretation. - The pos-registers of integrated SCSI-subsystems do not contain any - information concerning the IO-port offset, really. Instead, they contain - some info about the adapter, the chip, the NVRAM .... The I/O-port is - fixed to 0x3540 - 0x3547. There can be more than one adapters in the - slots and they get an offset for the I/O area in order to get their own - I/O-address area. See chapter 2 for detailed description. At least, the - detection should now work right, even on models other than 95. The 95ers - came happily around the bug, as their pos2 register contains always 0 - in the critical area. Reserved bits are not allowed to be interpreted, - therefore, IBM is allowed to set those bits as they like and they may - really vary between different PS/2 models. So, now, no interpretation - of reserved bits - hopefully no trouble here anymore. - 3) The command error, which you may get on models 55, 56, 57, 70, 77 and - P70 may have been caused by the fact, that adapters of older design do - not like sending commands to non-existing SCSI-devices and will react - with a command error as a sign of protest. While this error is not - present on IBM SCSI Adapter w/cache, it appears on IBM Integrated SCSI - Adapters. Therefore, I implemented a workaround to forgive those - adapters their protests, but it is marked up in the statistics, so - after a successful boot, you can see in /proc/scsi/ibmmca/<host_number> - how often the command errors have been forgiven to the SCSI-subsystem. - If the number is bigger than 0, you have a SCSI subsystem of older - design, what should no longer matter. - 4) ibmmca_getinfo() has been adapted very carefully, so it shows in the - slotn file really, what is senseful to be presented. - 5) ibmmca_register() has been extended in its parameter list in order to - pass the right name of the SCSI-adapter to Linux. - - Michael Lang - - Feb 6, 1999: (v3.1) - 1) Finally, after some 3.1Beta-releases, the 3.1 release. Sorry, for - the delayed release, but it was not finished with the release of - Kernel 2.2.0. - - Michael Lang - - Feb 10, 1999 (v3.1) - 1) Added a new commandline parameter called 'bypass' in order to bypass - every integrated subsystem SCSI-command consequently in case of - troubles. - 2) Concatenated read_capacity requests to the harddisks. It gave a lot - of troubles with some controllers and after I wanted to apply some - extensions, it jumped out in the same situation, on my w/cache, as like - on D. Weinehalls' Model 56, having integrated SCSI. This gave me the - decisive hint to move the code-part out and declare it global. Now - it seems to work far better and more stable. Let us see what - the world thinks of it... - 3) By the way, only Sony DAT-drives seem to show density code 0x13. A - test with a HP drive gave right results, so the problem is vendor- - specific and not a problem of the OS or the driver. - - Michael Lang - - Feb 18, 1999 (v3.1d) - 1) The abort command and the reset function have been checked for - inconsistencies. From the logical point of thinking, they work - at their optimum, now, but as the subsystem does not answer with an - interrupt, abort never finishes, sigh... - 2) Everything, that is accessed by a busmaster request from the adapter - is now declared as global variable, even the return-buffer in the - local checking phase. This assures, that no accesses to undefined memory - areas are performed. - 3) In ibmmca.h, the line unchecked_isa_dma is added with 1 in order to - avoid memory-pointers for the areas higher than 16MByte in order to - be sure, it also works on 16-Bit Microchannel bus systems. - 4) A lot of small things have been found, but nothing that endangered the - driver operations. Just it should be more stable, now. - - Michael Lang - - Feb 20, 1999 (v3.1e) - 1) I took the warning from the Linux Kernel Hackers Guide serious and - checked the cmd->result return value to the done-function very carefully. - It is obvious, that the IBM SCSI only delivers the tsb.dev_status, if - some error appeared, else it is undefined. Now, this is fixed. Before - any SCB command gets queued, the tsb.dev_status is set to 0, so the - cmd->result won't screw up Linux higher level drivers. - 2) The reset-function has slightly improved. This is still planned for - abort. During the abort and the reset function, no interrupts are - allowed. This is however quite hard to cope with, so the INT-status - register is read. When the interrupt gets queued, one can find its - status immediately on that register and is enabled to continue in the - reset function. I had no chance to test this really, only in a bogus - situation, I got this function running, but the situation was too much - worse for Linux :-(, so tests will continue. - 3) Buffers got now consistent. No open address mapping, as before and - therefore no further troubles with the unassigned memory segmentation - faults that scrambled probes on 95XX series and even on 85XX series, - when the kernel is done in a not so perfectly fitting way. - 4) Spontaneous interrupts from the subsystem, appearing without any - command previously queued are answered with a DID_BAD_INTR result. - 5) Taken into account ZP Gus' proposals to reverse the SCSI-device - scan order. As it does not work on Kernel 2.1.x or 2.2.x, as proposed - by him, I implemented it in a slightly derived way, which offers in - addition more flexibility. - - Michael Lang - - Apr 23, 2000 (v3.2pre1) - 1) During a very long time, I collected a huge amount of bug reports from - various people, trying really quite different things on their SCSI- - PS/2s. Today, all these bug reports are taken into account and should be - mostly solved. The major topics were: - - Driver crashes during boottime by no obvious reason. - - Driver panics while the midlevel-SCSI-driver is trying to inquire - the SCSI-device properties, even though hardware is in perfect state. - - Displayed info for the various slot-cards is interpreted wrong. - The main reasons for the crashes were two: - 1) The commands to check for device information like INQUIRY, - TEST_UNIT_READY, REQUEST_SENSE and MODE_SENSE cause the devices - to deliver information of up to 255 bytes. Midlevel drivers offer - 1024 bytes of space for the answer, but the IBM-SCSI-adapters do - not accept this, as they stick quite near to ANSI-SCSI and report - a COMMAND_ERROR message which causes the driver to panic. The main - problem was located around the INQUIRY command. Now, for all the - mentioned commands, the buffersize sent to the adapter is at - maximum 255 which seems to be a quite reasonable solution. - TEST_UNIT_READY gets a buffersize of 0 to make sure that no - data is transferred in order to avoid any possible command failure. - 2) On unsuccessful TEST_UNIT_READY, the mid-level driver has to send - a REQUEST_SENSE in order to see where the problem is located. This - REQUEST_SENSE may have various length in its answer-buffer. IBM - SCSI-subsystems report a command failure if the returned buffersize - is different from the sent buffersize, but this can be suppressed by - a special bit, which is now done and problems seem to be solved. - 2) Code adaption to all kernel-releases. Now, the 3.2 code compiles on - 2.0.x, 2.1.x, 2.2.x and 2.3.x kernel releases without any code-changes. - 3) Commandline-parameters are recognized again, even under Kernel 2.3.x or - higher. - - Michael Lang - - April 27, 2000 (v3.2pre2) - 1) Bypassed commands get read by the adapter by one cycle instead of two. - This increases SCSI-performance. - 2) Synchronous datatransfer is provided for sure to be 5 MHz on older - SCSI and 10 MHz on internal F/W SCSI-adapter. - 3) New commandline parameters allow to force the adapter to slow down while - in synchronous transfer. Could be helpful for very old devices. - - Michael Lang - - June 2, 2000 (v3.2pre5) - 1) Added Jim Shorney's contribution to make the activity indicator - flashing in addition to the LED-alphanumeric display-panel on - models 95A. To be enabled to choose this feature freely, a new - commandline parameter is added, called 'activity'. - 2) Added the READ_CONTROL bit for test_unit_ready SCSI-command. - 3) Added some suppress_exception bits to read_device_capacity and - all device_inquiry occurrences in the driver code. - 4) Complaints about the various KERNEL_VERSION implementations are - taken into account. Every local_LinuxKernelVersion occurrence is - now replaced by KERNEL_VERSION, defined in linux/version.h. - Corresponding changes were applied to ibmmca.h, too. This was a - contribution to all kernel-parts by Philipp Hahn. - - Michael Lang - - July 17, 2000 (v3.2pre8) - A long period of collecting bug reports from all corners of the world - now lead to the following corrections to the code: - 1) SCSI-2 F/W support crashed with a COMMAND ERROR. The reason for this - was that it is possible to disable Fast-SCSI for the external bus. - The feature-control command, where this crash appeared regularly, tried - to set the maximum speed of 10MHz synchronous transfer speed and that - reports a COMMAND ERROR if external bus Fast-SCSI is disabled. Now, - the feature-command probes down from maximum speed until the adapter - stops to complain, which is at the same time the maximum possible - speed selected in the reference program. So, F/W external can run at - 5 MHz (slow-) or 10 MHz (fast-SCSI). During feature probing, the - COMMAND ERROR message is used to detect if the adapter does not complain. - 2) Up to now, only combined busmode is supported, if you use external - SCSI-devices, attached to the F/W-controller. If dual bus is selected, - only the internal SCSI-devices get accessed by Linux. For most - applications, this should do fine. - 3) Wide-SCSI-addressing (16-Bit) is now possible for the internal F/W - bus on the F/W adapter. If F/W adapter is detected, the driver - automatically uses the extended PUN/LUN <-> LDN mapping tables, which - are now new from 3.2pre8. This allows PUNs between 0 and 15 and should - provide more fun with the F/W adapter. - 4) Several machines use the SCSI: POS registers for internal/undocumented - storage of system relevant info. This confused the driver, mainly on - models 9595, as it expected no onboard SCSI only, if all POS in - the integrated SCSI-area are set to 0x00 or 0xff. Now, the mechanism - to check for integrated SCSI is much more restrictive and these problems - should be history. - - Michael Lang - - July 18, 2000 (v3.2pre9) - This develop rather quickly at the moment. Two major things were still - missing in 3.2pre8: - 1) The adapter PUN for F/W adapters has 4-bits, while all other adapters - have 3-bits. This is now taken into account for F/W. - 2) When you select CONFIG_IBMMCA_SCSI_ORDER_STANDARD, you should - normally get the inverse probing order of your devices on the SCSI-bus. - The ANSI device order gets scrambled in version 3.2pre8!! Now, a new - and tested algorithm inverts the device-order on the SCSI-bus and - automatically avoids accidental access to whatever SCSI PUN the adapter - is set and works with SCSI- and Wide-SCSI-addressing. - - Michael Lang - - July 23, 2000 (v3.2pre10 unpublished) - 1) LED panel display supports wide-addressing in ibmmca=display mode. - 2) Adapter-information and autoadaption to address-space is done. - 3) Auto-probing for maximum synchronous SCSI transfer rate is working. - 4) Optimization to some embedded function calls is applied. - 5) Added some comment for the user to wait for SCSI-devices being probed. - 6) Finished version 3.2 for Kernel 2.4.0. It least, I thought it is but... - - Michael Lang - - July 26, 2000 (v3.2pre11) - 1) I passed a horrible weekend getting mad with NMIs on kernel 2.2.14 and - a model 9595. Asking around in the community, nobody except of me has - seen such errors. Weird, but I am trying to recompile everything on - the model 9595. Maybe, as I use a specially modified gcc, that could - cause problems. But, it was not the reason. The true background was, - that the kernel was compiled for i386 and the 9595 has a 486DX-2. - Normally, no troubles should appear, but for this special machine, - only the right processor support is working fine! - 2) Previous problems with synchronous speed, slowing down from one adapter - to the next during probing are corrected. Now, local variables store - the synchronous bitmask for every single adapter found on the MCA bus. - 3) LED alphanumeric panel support for XX95 systems is now showing some - alive rotator during boottime. This makes sense, when no monitor is - connected to the system. You can get rid of all display activity, if - you do not use any parameter or just ibmmcascsi=activity, for the - harddrive activity LED, existent on all PS/2, except models 8595-XXX. - If no monitor is available, please use ibmmcascsi=display, which works - fine together with the linuxinfo utility for the LED-panel. - - Michael Lang - - July 29, 2000 (v3.2) - 1) Submission of this driver for kernel 2.4test-XX and 2.2.17. - - Michael Lang - - December 28, 2000 (v3.2d / v4.0) - 1) The interrupt handler had some wrong statement to wait for. This - was done due to experimental reasons during 3.2 development but it - has shown that this is not stable enough. Going back to wait for the - adapter to be not busy is best. - 2) Inquiry requests can be shorter than 255 bytes of return buffer. Due - to a bug in the ibmmca_queuecommand routine, this buffer was forced - to 255 at minimum. If the memory address, this return buffer is pointing - to does not offer more space, invalid memory accesses destabilized the - kernel. - 3) version 4.0 is only valid for kernel 2.4.0 or later. This is necessary - to remove old kernel version dependent waste from the driver. 3.2d is - only distributed with older kernels but keeps compatibility with older - kernel versions. 4.0 and higher versions cannot be used with older - kernels anymore!! You must have at least kernel 2.4.0!! - 4) The commandline argument 'bypass' and all its functionality got removed - in version 4.0. This was never really necessary, as all troubles were - based on non-command related reasons up to now, so bypassing commands - did not help to avoid any bugs. It is kept in 3.2X for debugging reasons. - 5) Dynamic reassignment of ldns was again verified and analyzed to be - completely inoperational. This is corrected and should work now. - 6) All commands that get sent to the SCSI adapter were verified and - completed in such a way, that they are now completely conform to the - demands in the technical description of IBM. Main candidates were the - DEVICE_INQUIRY, REQUEST_SENSE and DEVICE_CAPACITY commands. They must - be transferred by bypassing the internal command buffer of the adapter - or else the response can be a random result. GET_POS_INFO would be more - safe in usage, if one could use the SUPRESS_EXCEPTION_SHORT, but this - is not allowed by the technical references of IBM. (Sorry, folks, the - model 80 problem is still a task to be solved in a different way.) - 7) v3.2d is still hold back for some days for testing, while 4.0 is - released. - - Michael Lang - - January 3, 2001 (v4.0a) - 1) A lot of complains after the 2.4.0-prerelease kernel came in about - the impossibility to compile the driver as a module. This problem is - solved. In combination with that problem, some unprecise declaration - of the function option_setup() gave some warnings during compilation. - This is solved, too by a forward declaration in ibmmca.c. - 2) #ifdef argument concerning CONFIG_SCSI_IBMMCA is no longer needed and - was entirely removed. - 3) Some switch statements got optimized in code, as some minor variables - in internal SCSI-command handlers. - - Michael Lang - - 4 To do - ------- - - IBM SCSI-2 F/W external SCSI bus support in separate mode! - - It seems that the handling of bad disks is really bad - - non-existent, in fact. However, a low-level driver cannot help - much, if such things happen. - - 5 Users' Manual - --------------- - 5.1 Commandline Parameters - -------------------------- - There exist several features for the IBM SCSI-subsystem driver. - The commandline parameter format is: - - ibmmcascsi=<command1>,<command2>,<command3>,... - - where commandN can be one of the following: - - display Owners of a model 95 or other PS/2 systems with an - alphanumeric LED display may set this to have their - display showing the following output of the 8 digits: - - ------DA - - where '-' stays dark, 'D' shows the SCSI-device id - and 'A' shows the SCSI hostindex, being currently - accessed. During boottime, this will give the message - - SCSIini* - - on the LED-panel, where the * represents a rotator, - showing the activity during the probing phase of the - driver which can take up to two minutes per SCSI-adapter. - adisplay This works like display, but gives more optical overview - of the activities on the SCSI-bus. The display will have - the following output: - - 6543210A - - where the numbers 0 to 6 light up at the shown position, - when the SCSI-device is accessed. 'A' shows again the SCSI - hostindex. If display nor adisplay is set, the internal - PS/2 harddisk LED is used for media-activities. So, if - you really do not have a system with a LED-display, you - should not set display or adisplay. Keep in mind, that - display and adisplay can only be used alternatively. It - is not recommended to use this option, if you have some - wide-addressed devices e.g. at the SCSI-2 F/W adapter in - your system. In addition, the usage of the display for - other tasks in parallel, like the linuxinfo-utility makes - no sense with this option. - activity This enables the PS/2 harddisk LED activity indicator. - Most PS/2 have no alphanumeric LED display, but some - indicator. So you should use this parameter to activate it. - If you own model 9595 (Server95), you can have both, the - LED panel and the activity indicator in parallel. However, - some PS/2s, like the 8595 do not have any harddisk LED - activity indicator, which means, that you must use the - alphanumeric LED display if you want to monitor SCSI- - activity. - bypass This is obsolete from driver version 4.0, as the adapters - got that far understood, that the selection between - integrated and bypassed commands should now work completely - correct! For historical reasons, the old description is - kept here: - This commandline parameter forces the driver never to use - SCSI-subsystems' integrated SCSI-command set. Except of - the immediate assign, which is of vital importance for - every IBM SCSI-subsystem to set its ldns right. Instead, - the ordinary ANSI-SCSI-commands are used and passed by the - controller to the SCSI-devices, therefore 'bypass'. The - effort, done by the subsystem is quite bogus and at a - minimum and therefore it should work everywhere. This - could maybe solve troubles with old or integrated SCSI- - controllers and nasty harddisks. Keep in mind, that using - this flag will slow-down SCSI-accesses slightly, as the - software generated commands are always slower than the - hardware. Non-harddisk devices always get read/write- - commands in bypass mode. On the most recent releases of - the Linux IBM-SCSI-driver, the bypass command should be - no longer a necessary thing, if you are sure about your - SCSI-hardware! - normal This is the parameter, introduced on the 2.0.x development - rail by ZP Gu. This parameter defines the SCSI-device - scan order in the new industry standard. This means, that - the first SCSI-device is the one with the lowest pun. - E.g. harddisk at pun=0 is scanned before harddisk at - pun=6, which means, that harddisk at pun=0 gets sda - and the one at pun=6 gets sdb. - ansi The ANSI-standard for the right scan order, as done by - IBM, Microware and Microsoft, scans SCSI-devices starting - at the highest pun, which means, that e.g. harddisk at - pun=6 gets sda and a harddisk at pun=0 gets sdb. If you - like to have the same SCSI-device order, as in DOS, OS-9 - or OS/2, just use this parameter. - fast SCSI-I/O in synchronous mode is done at 5 MHz for IBM- - SCSI-devices. SCSI-2 Fast/Wide Adapter/A external bus - should then run at 10 MHz if Fast-SCSI is enabled, - and at 5 MHz if Fast-SCSI is disabled on the external - bus. This is the default setting when nothing is - specified here. - medium Synchronous rate is at 50% approximately, which means - 2.5 MHz for IBM SCSI-adapters and 5.0 MHz for F/W ext. - SCSI-bus (when Fast-SCSI speed enabled on external bus). - slow The slowest possible synchronous transfer rate is set. - This means 1.82 MHz for IBM SCSI-adapters and 2.0 MHz - for F/W external bus at Fast-SCSI speed on the external - bus. - - A further option is that you can force the SCSI-driver to accept a SCSI- - subsystem at a certain I/O-address with a predefined adapter PUN. This - is done by entering - - commandN = I/O-base - commandN+1 = adapter PUN - - e.g. ibmmcascsi=0x3540,7 will force the driver to detect a SCSI-subsystem - at I/O-address 0x3540 with adapter PUN 7. Please only use this method, if - the driver does really not recognize your SCSI-adapter! With driver version - 3.2, this recognition of various adapters was hugely improved and you - should try first to remove your commandline arguments of such type with a - newer driver. I bet, it will be recognized correctly. Even multiple and - different types of IBM SCSI-adapters should be recognized correctly, too. - Use the forced detection method only as last solution! - - Examples: - - ibmmcascsi=adisplay - - This will use the advanced display mode for the model 95 LED alphanumeric - display. - - ibmmcascsi=display,0x3558,7 - - This will activate the default display mode for the model 95 LED display - and will force the driver to accept a SCSI-subsystem at I/O-base 0x3558 - with adapter PUN 7. - - 5.2 Troubleshooting - ------------------- - The following FAQs should help you to solve some major problems with this - driver. - - Q: "Reset SCSI-devices at boottime" halts the system at boottime, why? - A: This is only tested with the IBM SCSI Adapter w/cache. It is not - yet proven to run on other adapters, however you may be lucky. - In version 3.1d this has been hugely improved and should work better, - now. Normally you really won't need to activate this flag in the - kernel configuration, as all post 1989 SCSI-devices should accept - the reset-signal, when the computer is switched on. The SCSI- - subsystem generates this reset while being initialized. This flag - is really reserved for users with very old, very strange or self-made - SCSI-devices. - Q: Why is the SCSI-order of my drives mirrored to the device-order - seen from OS/2 or DOS ? - A: It depends on the operating system, if it looks at the devices in - ANSI-SCSI-standard (starting from pun 6 and going down to pun 0) or - if it just starts at pun 0 and counts up. If you want to be conform - with OS/2 and DOS, you have to activate this flag in the kernel - configuration or you should set 'ansi' as parameter for the kernel. - The parameter 'normal' sets the new industry standard, starting - from pun 0, scanning up to pun 6. This allows you to change your - opinion still after having already compiled the kernel. - Q: Why can't I find IBM MCA SCSI support in the config menu? - A: You have to activate MCA bus support, first. - Q: Where can I find the latest info about this driver? - A: See the file MAINTAINERS for the current WWW-address, which offers - updates, info and Q/A lists. At this file's origin, the webaddress - was: http://www.staff.uni-mainz.de/mlang/linux.html - Q: My SCSI-adapter is not recognized by the driver, what can I do? - A: Just force it to be recognized by kernel parameters. See section 5.1. - If this really happens, do also send e-mail to the maintainer, as - forced detection should be never necessary. Forced detection is in - principal some flaw of the driver adapter detection and goes into - bug reports. - Q: The driver screws up, if it starts to probe SCSI-devices, is there - some way out of it? - A: Yes, that was some recognition problem of the correct SCSI-adapter - and its I/O base addresses. Upgrade your driver to the latest release - and it should be fine again. - Q: I get a message: panic IBM MCA SCSI: command error .... , what can - I do against this? - A: Previously, I followed the way by ignoring command errors by using - ibmmcascsi=forgiveall, but this command no longer exists and is - obsolete. If such a problem appears, it is caused by some segmentation - fault of the driver, which maps to some unallowed area. The latest - version of the driver should be ok, as most bugs have been solved. - Q: There are still kernel panics, even after having set - ibmmcascsi=forgiveall. Are there other possibilities to prevent - such panics? - A: No, get just the latest release of the driver and it should work - better and better with increasing version number. Forget about this - ibmmcascsi=forgiveall, as also ignorecmd are obsolete.! - Q: Linux panics or stops without any comment, but it is probable, that my - harddisk(s) have bad blocks. - A: Sorry, the bad-block handling is still a feeble point of this driver, - but is on the schedule for development in the near future. - Q: Linux panics while dynamically assigning SCSI-ids or ldns. - A: If you disconnect a SCSI-device from the machine, while Linux is up - and the driver uses dynamical reassignment of logical device numbers - (ldn), it really gets "angry" if it won't find devices, that were still - present at boottime and stops Linux. - Q: The system does not recover after an abort-command has been generated. - A: This is regrettably true, as it is not yet understood, why the - SCSI-adapter does really NOT generate any interrupt at the end of - the abort-command. As no interrupt is generated, the abort command - cannot get finished and the system hangs, sorry, but checks are - running to hunt down this problem. If there is a real pending command, - the interrupt MUST get generated after abort. In this case, it - should finish well. - Q: The system gets in bad shape after a SCSI-reset, is this known? - A: Yes, as there are a lot of prescriptions (see the Linux Hackers' - Guide) what has to be done for reset, we still share the bad shape of - the reset functions with all other low level SCSI-drivers. - Astonishingly, reset works in most cases quite ok, but the harddisks - won't run in synchronous mode anymore after a reset, until you reboot. - Q: Why does my XXX w/Cache adapter not use read-prefetch? - A: Ok, that is not completely possible. If a cache is present, the - adapter tries to use it internally. Explicitly, one can use the cache - with a read prefetch command, maybe in future, but this requires - some major overhead of SCSI-commands that risks the performance to - go down more than it gets improved. Tests with that are running. - Q: I have a IBM SCSI-2 Fast/Wide adapter, it boots in some way and hangs. - A: Yes, that is understood, as for sure, your SCSI-2 Fast/Wide adapter - was in such a case recognized as integrated SCSI-adapter or something - else, but not as the correct adapter. As the I/O-ports get assigned - wrongly by that reason, the system should crash in most cases. You - should upgrade to the latest release of the SCSI-driver. The - recommended version is 3.2 or later. Here, the F/W support is in - a stable and reliable condition. Wide-addressing is in addition - supported. - Q: I get an Oops message and something like "killing interrupt". - A: The reason for this is that the IBM SCSI-subsystem only sends a - termination status back, if some error appeared. In former releases - of the driver, it was not checked, if the termination status block - is NULL. From version 3.2, it is taken care of this. - Q: I have a F/W adapter and the driver sees my internal SCSI-devices, - but ignores the external ones. - A: Select combined busmode in the IBM config-program and check for that - no SCSI-id on the external devices appears on internal devices. - Reboot afterwards. Dual busmode is supported, but works only for the - internal bus, yet. External bus is still ignored. Take care for your - SCSI-ids. If combined bus-mode is activated, on some adapters, - the wide-addressing is not possible, so devices with ids between 8 - and 15 get ignored by the driver & adapter! - Q: I have a 9595 and I get a NMI during heavy SCSI I/O e.g. during fsck. - A COMMAND ERROR is reported and characters on the screen are missing. - Warm reboot is not possible. Things look like quite weird. - A: Check the processor type of your 9595. If you have an 80486 or 486DX-2 - processor complex on your mainboard and you compiled a kernel that - supports 80386 processors, it is possible, that the kernel cannot - keep track of the PS/2 interrupt handling and stops on an NMI. Just - compile a kernel for the correct processor type of your PS/2 and - everything should be fine. This is necessary even if one assumes, - that some 80486 system should be downward compatible to 80386 - software. - Q: Some commands hang and interrupts block the machine. After some - timeout, the syslog reports that it tries to call abort, but the - machine is frozen. - A: This can be a busy wait bug in the interrupt handler of driver - version 3.2. You should at least upgrade to 3.2c if you use - kernel < 2.4.0 and driver version 4.0 if you use kernel 2.4.0 or - later (including all test releases). - Q: I have a PS/2 model 80 and more than 16 MBytes of RAM. The driver - completely refuses to work, reports NMIs, COMMAND ERRORs or other - ambiguous stuff. When reducing the RAM size down below 16 MB, - everything is running smoothly. - A: No real answer, yet. In any case, one should force the kernel to - present SCBs only below the 16 MBytes barrier. Maybe this solves the - problem. Not yet tried, but guessing that it could work. To get this, - set unchecked_isa_dma argument of ibmmca.h from 0 to 1. - - 5.3 Bug reports - -------------- - If you really find bugs in the source code or the driver will successfully - refuse to work on your machine, you should send a bug report to me. The - best for this is to follow the instructions on the WWW-page for this - driver. Fill out the bug-report form, placed on the WWW-page and ship it, - so the bugs can be taken into account with maximum efforts. But, please - do not send bug reports about this driver to Linus Torvalds or Leonard - Zubkoff, as Linus is buried in E-Mail and Leonard is supervising all - SCSI-drivers and won't have the time left to look inside every single - driver to fix a bug and especially DO NOT send modified code to Linus - Torvalds or Alan J. Cox which has not been checked here!!! They are both - quite buried in E-mail (as me, sometimes, too) and one should first check - for problems on my local teststand. Recently, I got a lot of - bug reports for errors in the ibmmca.c code, which I could not imagine, but - a look inside some Linux-distribution showed me quite often some modified - code, which did no longer work on most other machines than the one of the - modifier. Ok, so now that there is maintenance service available for this - driver, please use this address first in order to keep the level of - confusion low. Thank you! - - When you get a SCSI-error message that panics your system, a list of - register-entries of the SCSI-subsystem is shown (from Version 3.1d). With - this list, it is very easy for the maintainer to localize the problem in - the driver or in the configuration of the user. Please write down all the - values from this report and send them to the maintainer. This would really - help a lot and makes life easier concerning misunderstandings. - - Use the bug-report form (see 5.4 for its address) to send all the bug- - stuff to the maintainer or write e-mail with the values from the table. - - 5.4 Support WWW-page - -------------------- - The address of the IBM SCSI-subsystem supporting WWW-page is: - - http://www.staff.uni-mainz.de/mlang/linux.html - - Here you can find info about the background of this driver, patches, - troubleshooting support, news and a bugreport form. Please check that - WWW-page regularly for latest hints. If ever this URL changes, please - refer to the MAINTAINERS file in order to get the latest address. - - For the bugreport, please fill out the formular on the corresponding - WWW-page. Read the dedicated instructions and write as much as you - know about your problem. If you do not like such formulars, please send - some e-mail directly, but at least with the same information as required by - the formular. - - If you have extensive bug reports, including Oops messages and - screen-shots, please feel free to send it directly to the address - of the maintainer, too. The current address of the maintainer is: - - Michael Lang <langa2@kph.uni-mainz.de> - - 6 References - ------------ - IBM Corp., "Update for the PS/2 Hardware Interface Technical Reference, - Common Interfaces", Armonk, September 1991, PN 04G3281, - (available in the U.S. for $21.75 at 1-800-IBM-PCTB or in Germany for - around 40,-DM at "Hallo IBM"). - - IBM Corp., "Personal System/2 Micro Channel SCSI - Adapter with Cache Technical Reference", Armonk, March 1990, PN 68X2365. - - IBM Corp., "Personal System/2 Micro Channel SCSI - Adapter Technical Reference", Armonk, March 1990, PN 68X2397. - - IBM Corp., "SCSI-2 Fast/Wide Adapter/A Technical Reference - Dual Bus", - Armonk, March 1994, PN 83G7545. - - Friedhelm Schmidt, "SCSI-Bus und IDE-Schnittstelle - Moderne Peripherie- - Schnittstellen: Hardware, Protokollbeschreibung und Anwendung", 2. Aufl. - Addison Wesley, 1996. - - Michael K. Johnson, "The Linux Kernel Hackers' Guide", Version 0.6, Chapel - Hill - North Carolina, 1995 - - Andreas Kaiser, "SCSI TAPE BACKUP for OS/2 2.0", Version 2.12, Stuttgart - 1993 - - Helmut Rompel, "IBM Computerwelt GUIDE", What is what bei IBM., Systeme * - Programme * Begriffe, IWT-Verlag GmbH - Muenchen, 1988 - - 7 Credits to - ------------ - 7.1 People - ---------- - Klaus Grimm - who already a long time ago gave me the old code from the - SCSI-driver in order to get it running for some old machine - in our institute. - Martin Kolinek - who wrote the first release of the IBM SCSI-subsystem driver. - Chris Beauregard - who for a long time maintained MCA-Linux and the SCSI-driver - in the beginning. Chris, wherever you are: Cheers to you! - Klaus Kudielka - with whom in the 2.1.x times, I had a quite fruitful - cooperation to get the driver running as a module and to get - it running with multiple SCSI-adapters. - David Weinehall - for his excellent maintenance of the MCA-stuff and the quite - detailed bug reports and ideas for this driver (and his - patience ;-)). - Alan J. Cox - for his bug reports and his bold activities in cross-checking - the driver-code with his teststand. - - 7.2 Sponsors & Supporters - ------------------------- - "Hallo IBM", - IBM-Deutschland GmbH - the service of IBM-Deutschland for customers. Their E-Mail - service is unbeatable. Whatever old stuff I asked for, I - always got some helpful answers. - Karl-Otto Reimers, - IBM Klub - Sparte IBM Geschichte, Sindelfingen - for sending me a copy of the w/Cache manual from the - IBM-Deutschland archives. - Harald Staiger - for his extensive hardware donations which allows me today - still to test the driver in various constellations. - Erich Fritscher - for his very kind sponsoring. - Louis Ohland, - Charles Lasitter - for support by shipping me an IBM SCSI-2 Fast/Wide manual. - In addition, the contribution of various hardware is quite - decessive and will make it possible to add FWSR (RAID) - adapter support to the driver in the near future! So, - complaints about no RAID support won't remain forever. - Yes, folks, that is no joke, RAID support is going to rise! - Erik Weber - for the great deal we made about a model 9595 and the nice - surrounding equipment and the cool trip to Mannheim - second-hand computer market. In addition, I would like - to thank him for his exhaustive SCSI-driver testing on his - 95er PS/2 park. - Anthony Hogbin - for his direct shipment of a SCSI F/W adapter, which allowed - me immediately on the first stage to try it on model 8557 - together with onboard SCSI adapter and some SCSI w/Cache. - Andreas Hotz - for his support by memory and an IBM SCSI-adapter. Collecting - all this together now allows me to try really things with - the driver at maximum load and variety on various models in - a very quick and efficient way. - Peter Jennewein - for his model 30, which serves me as part of my teststand - and his cool remark about how you make an ordinary diskette - drive working and how to connect it to an IBM-diskette port. - Johannes Gutenberg-Universitaet, Mainz & - Institut fuer Kernphysik, Mainz Microtron (MAMI) - for the offered space, the link, placed on the central - homepage and the space to store and offer the driver and - related material and the free working times, which allow - me to answer all your e-mail. - - 8 Trademarks - ------------ - IBM, PS/2, OS/2, Microchannel are registered trademarks of International - Business Machines Corporation - - MS-DOS is a registered trademark of Microsoft Corporation - - Microware, OS-9 are registered trademarks of Microware Systems - - 9 Disclaimer - ------------ - Beside the GNU General Public License and the dependent disclaimers and disclaimers - concerning the Linux-kernel in special, this SCSI-driver comes without any - warranty. Its functionality is tested as good as possible on certain - machines and combinations of computer hardware, which does not exclude, - that data loss or severe damage of hardware is possible while using this - part of software on some arbitrary computer hardware or in combination - with other software packages. It is highly recommended to make backup - copies of your data before using this software. Furthermore, personal - injuries by hardware defects, that could be caused by this SCSI-driver are - not excluded and it is highly recommended to handle this driver with a - maximum of carefulness. - - This driver supports hardware, produced by International Business Machines - Corporation (IBM). - ------- -Michael Lang -(langa2@kph.uni-mainz.de) diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt index 21e5798526ee..2bfd6f6d2d3d 100644 --- a/Documentation/scsi/scsi-parameters.txt +++ b/Documentation/scsi/scsi-parameters.txt @@ -37,9 +37,6 @@ parameters may be changed at runtime by the command eata= [HW,SCSI] - fd_mcs= [HW,SCSI] - See header of drivers/scsi/fd_mcs.c. - fdomain= [HW,SCSI] See header of drivers/scsi/fdomain.c. @@ -48,9 +45,6 @@ parameters may be changed at runtime by the command gvp11= [HW,SCSI] - ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter - See Documentation/mca.txt. - in2000= [HW,SCSI] See header of drivers/scsi/in2000.c. diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index a340b18cd4eb..2b06aba4fa0f 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -30,7 +30,7 @@ the motherboard (or both). Some aic7xxx based HBAs are dual controllers and thus represent two hosts. Like most modern HBAs, each aic7xxx host has its own PCI device address. [The one-to-one correspondence between a SCSI host and a PCI device is common but not required (e.g. with -ISA or MCA adapters).] +ISA adapters).] The SCSI mid level isolates an LLD from other layers such as the SCSI upper layer drivers and the block layer. diff --git a/Documentation/serial/stallion.txt b/Documentation/serial/stallion.txt index 55090914a9c5..4d798c0cb5cb 100644 --- a/Documentation/serial/stallion.txt +++ b/Documentation/serial/stallion.txt @@ -20,10 +20,10 @@ There are two drivers that work with the different families of Stallion multiport serial boards. One is for the Stallion smart boards - that is EasyIO, EasyConnection 8/32 and EasyConnection 8/64-PCI, the other for the true Stallion intelligent multiport boards - EasyConnection 8/64 -(ISA, EISA, MCA), EasyConnection/RA-PCI, ONboard and Brumby. +(ISA, EISA), EasyConnection/RA-PCI, ONboard and Brumby. If you are using any of the Stallion intelligent multiport boards (Brumby, -ONboard, EasyConnection 8/64 (ISA, EISA, MCA), EasyConnection/RA-PCI) with +ONboard, EasyConnection 8/64 (ISA, EISA), EasyConnection/RA-PCI) with Linux you will need to get the driver utility package. This contains a firmware loader and the firmware images necessary to make the devices operate. @@ -40,7 +40,7 @@ If you are using the EasyIO, EasyConnection 8/32 or EasyConnection 8/64-PCI boards then you don't need this package, although it does have a serial stats display program. -If you require DIP switch settings, EISA or MCA configuration files, or any +If you require DIP switch settings, or EISA configuration files, or any other information related to Stallion boards then have a look at Stallion's web pages at http://www.stallion.com. @@ -51,13 +51,13 @@ web pages at http://www.stallion.com. The drivers can be used as loadable modules or compiled into the kernel. You can choose which when doing a "config" on the kernel. -All ISA, EISA and MCA boards that you want to use need to be configured into +All ISA, and EISA boards that you want to use need to be configured into the driver(s). All PCI boards will be automatically detected when you load the driver - so they do not need to be entered into the driver(s) configuration structure. Note that kernel PCI support is required to use PCI boards. -There are two methods of configuring ISA, EISA and MCA boards into the drivers. +There are two methods of configuring ISA and EISA boards into the drivers. If using the driver as a loadable module then the simplest method is to pass the driver configuration as module arguments. The other method is to modify the driver source to add configuration lines for each board in use. @@ -71,12 +71,12 @@ That makes things pretty simple to get going. 2.1 MODULE DRIVER CONFIGURATION: The simplest configuration for modules is to use the module load arguments -to configure any ISA, EISA or MCA boards. PCI boards are automatically +to configure any ISA or EISA boards. PCI boards are automatically detected, so do not need any additional configuration at all. -If using EasyIO, EasyConnection 8/32 ISA or MCA, or EasyConnection 8/63-PCI +If using EasyIO, EasyConnection 8/32 ISA, or EasyConnection 8/63-PCI boards then use the "stallion" driver module, Otherwise if you are using -an EasyConnection 8/64 ISA, EISA or MCA, EasyConnection/RA-PCI, ONboard, +an EasyConnection 8/64 ISA or EISA, EasyConnection/RA-PCI, ONboard, Brumby or original Stallion board then use the "istallion" driver module. Typically to load up the smart board driver use: @@ -146,7 +146,7 @@ on each system boot. Typically configuration files are put in the 2.2 STATIC DRIVER CONFIGURATION: For static driver configuration you need to modify the driver source code. -Entering ISA, EISA and MCA boards into the driver(s) configuration structure +Entering ISA and EISA boards into the driver(s) configuration structure involves editing the driver(s) source file. It's pretty easy if you follow the instructions below. Both drivers can support up to 4 boards. The smart card driver (the stallion.c driver) supports any combination of EasyIO and @@ -157,7 +157,7 @@ supports any combination of ONboards, Brumbys, Stallions and EasyConnection To set up the driver(s) for the boards that you want to use you need to edit the appropriate driver file and add configuration entries. -If using EasyIO or EasyConnection 8/32 ISA or MCA boards, +If using EasyIO or EasyConnection 8/32 ISA boards, In drivers/char/stallion.c: - find the definition of the stl_brdconf array (of structures) near the top of the file @@ -243,7 +243,7 @@ change it on the board. On EasyIO and EasyConnection 8/32 boards the IRQ is software programmable, so if there is a conflict you may need to change the IRQ used for a board. There are no interrupts to worry about for ONboard, Brumby or EasyConnection 8/64 -(ISA, EISA and MCA) boards. The memory region on EasyConnection 8/64 and +(ISA and EISA) boards. The memory region on EasyConnection 8/64 and ONboard boards is software programmable, but not on the Brumby boards. diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 8c16d50f6cb6..221b81016dba 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1545,7 +1545,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for sound cards based on the C-Media CMI8786/8787/8788 chip: * Asound A-8788 - * Asus Xonar DG + * Asus Xonar DG/DGX * AuzenTech X-Meridian * AuzenTech X-Meridian 2G * Bgears b-Enspirer diff --git a/Documentation/trace/uprobetracer.txt b/Documentation/trace/uprobetracer.txt new file mode 100644 index 000000000000..24ce6823a09e --- /dev/null +++ b/Documentation/trace/uprobetracer.txt @@ -0,0 +1,113 @@ + Uprobe-tracer: Uprobe-based Event Tracing + ========================================= + Documentation written by Srikar Dronamraju + +Overview +-------- +Uprobe based trace events are similar to kprobe based trace events. +To enable this feature, build your kernel with CONFIG_UPROBE_EVENT=y. + +Similar to the kprobe-event tracer, this doesn't need to be activated via +current_tracer. Instead of that, add probe points via +/sys/kernel/debug/tracing/uprobe_events, and enable it via +/sys/kernel/debug/tracing/events/uprobes/<EVENT>/enabled. + +However unlike kprobe-event tracer, the uprobe event interface expects the +user to calculate the offset of the probepoint in the object + +Synopsis of uprobe_tracer +------------------------- + p[:[GRP/]EVENT] PATH:SYMBOL[+offs] [FETCHARGS] : Set a probe + + GRP : Group name. If omitted, use "uprobes" for it. + EVENT : Event name. If omitted, the event name is generated + based on SYMBOL+offs. + PATH : path to an executable or a library. + SYMBOL[+offs] : Symbol+offset where the probe is inserted. + + FETCHARGS : Arguments. Each probe can have up to 128 args. + %REG : Fetch register REG + +Event Profiling +--------------- + You can check the total number of probe hits and probe miss-hits via +/sys/kernel/debug/tracing/uprobe_profile. + The first column is event name, the second is the number of probe hits, +the third is the number of probe miss-hits. + +Usage examples +-------------- +To add a probe as a new event, write a new definition to uprobe_events +as below. + + echo 'p: /bin/bash:0x4245c0' > /sys/kernel/debug/tracing/uprobe_events + + This sets a uprobe at an offset of 0x4245c0 in the executable /bin/bash + + echo > /sys/kernel/debug/tracing/uprobe_events + + This clears all probe points. + +The following example shows how to dump the instruction pointer and %ax +a register at the probed text address. Here we are trying to probe +function zfree in /bin/zsh + + # cd /sys/kernel/debug/tracing/ + # cat /proc/`pgrep zsh`/maps | grep /bin/zsh | grep r-xp + 00400000-0048a000 r-xp 00000000 08:03 130904 /bin/zsh + # objdump -T /bin/zsh | grep -w zfree + 0000000000446420 g DF .text 0000000000000012 Base zfree + +0x46420 is the offset of zfree in object /bin/zsh that is loaded at +0x00400000. Hence the command to probe would be : + + # echo 'p /bin/zsh:0x46420 %ip %ax' > uprobe_events + +Please note: User has to explicitly calculate the offset of the probepoint +in the object. We can see the events that are registered by looking at the +uprobe_events file. + + # cat uprobe_events + p:uprobes/p_zsh_0x46420 /bin/zsh:0x00046420 arg1=%ip arg2=%ax + +The format of events can be seen by viewing the file events/uprobes/p_zsh_0x46420/format + + # cat events/uprobes/p_zsh_0x46420/format + name: p_zsh_0x46420 + ID: 922 + format: + field:unsigned short common_type; offset:0; size:2; signed:0; + field:unsigned char common_flags; offset:2; size:1; signed:0; + field:unsigned char common_preempt_count; offset:3; size:1; signed:0; + field:int common_pid; offset:4; size:4; signed:1; + field:int common_padding; offset:8; size:4; signed:1; + + field:unsigned long __probe_ip; offset:12; size:4; signed:0; + field:u32 arg1; offset:16; size:4; signed:0; + field:u32 arg2; offset:20; size:4; signed:0; + + print fmt: "(%lx) arg1=%lx arg2=%lx", REC->__probe_ip, REC->arg1, REC->arg2 + +Right after definition, each event is disabled by default. For tracing these +events, you need to enable it by: + + # echo 1 > events/uprobes/enable + +Lets disable the event after sleeping for some time. + # sleep 20 + # echo 0 > events/uprobes/enable + +And you can see the traced information via /sys/kernel/debug/tracing/trace. + + # cat trace + # tracer: nop + # + # TASK-PID CPU# TIMESTAMP FUNCTION + # | | | | | + zsh-24842 [006] 258544.995456: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79 + zsh-24842 [007] 258545.000270: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79 + zsh-24842 [002] 258545.043929: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79 + zsh-24842 [004] 258547.046129: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79 + +Each line shows us probes were triggered for a pid 24842 with ip being +0x446421 and contents of ax register being 79. diff --git a/Documentation/video4linux/4CCs.txt b/Documentation/video4linux/4CCs.txt new file mode 100644 index 000000000000..41241af1ebfe --- /dev/null +++ b/Documentation/video4linux/4CCs.txt @@ -0,0 +1,32 @@ +Guidelines for Linux4Linux pixel format 4CCs +============================================ + +Guidelines for Video4Linux 4CC codes defined using v4l2_fourcc() are +specified in this document. First of the characters defines the nature of +the pixel format, compression and colour space. The interpretation of the +other three characters depends on the first one. + +Existing 4CCs may not obey these guidelines. + +Formats +======= + +Raw bayer +--------- + +The following first characters are used by raw bayer formats: + + B: raw bayer, uncompressed + b: raw bayer, DPCM compressed + a: A-law compressed + u: u-law compressed + +2nd character: pixel order + B: BGGR + G: GBRG + g: GRBG + R: RGGB + +3rd character: uncompressed bits-per-pixel 0--9, A-- + +4th character: compressed bits-per-pixel 0--9, A-- diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index e6c2842407a4..1e6b6531bbcc 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -276,6 +276,7 @@ pac7302 093a:2622 Genius Eye 312 pac7302 093a:2624 PAC7302 pac7302 093a:2625 Genius iSlim 310 pac7302 093a:2626 Labtec 2200 +pac7302 093a:2627 Genius FaceCam 300 pac7302 093a:2628 Genius iLook 300 pac7302 093a:2629 Genious iSlim 300 pac7302 093a:262a Webcam 300k diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt index e2492a9d1027..43da22b89728 100644 --- a/Documentation/video4linux/v4l2-controls.txt +++ b/Documentation/video4linux/v4l2-controls.txt @@ -130,8 +130,18 @@ Menu controls are added by calling v4l2_ctrl_new_std_menu: const struct v4l2_ctrl_ops *ops, u32 id, s32 max, s32 skip_mask, s32 def); +Or alternatively for integer menu controls, by calling v4l2_ctrl_new_int_menu: + + struct v4l2_ctrl *v4l2_ctrl_new_int_menu(struct v4l2_ctrl_handler *hdl, + const struct v4l2_ctrl_ops *ops, + u32 id, s32 max, s32 def, const s64 *qmenu_int); + These functions are typically called right after the v4l2_ctrl_handler_init: + static const s64 exp_bias_qmenu[] = { + -2, -1, 0, 1, 2 + }; + v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls); v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops, V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); @@ -141,6 +151,11 @@ These functions are typically called right after the v4l2_ctrl_handler_init: V4L2_CID_POWER_LINE_FREQUENCY, V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0, V4L2_CID_POWER_LINE_FREQUENCY_DISABLED); + v4l2_ctrl_new_int_menu(&foo->ctrl_handler, &foo_ctrl_ops, + V4L2_CID_EXPOSURE_BIAS, + ARRAY_SIZE(exp_bias_qmenu) - 1, + ARRAY_SIZE(exp_bias_qmenu) / 2 - 1, + exp_bias_qmenu); ... if (foo->ctrl_handler.error) { int err = foo->ctrl_handler.error; @@ -164,6 +179,12 @@ controls. There is no min argument since that is always 0 for menu controls, and instead of a step there is a skip_mask argument: if bit X is 1, then menu item X is skipped. +The v4l2_ctrl_new_int_menu function creates a new standard integer menu +control with driver-specific items in the menu. It differs from +v4l2_ctrl_new_std_menu in that it doesn't have the mask argument and takes +as the last argument an array of signed 64-bit integers that form an exact +menu item list. + Note that if something fails, the function will return NULL or an error and set ctrl_handler->error to the error code. If ctrl_handler->error was already set, then it will just return and do nothing. This is also true for diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 659b2ba12a4f..1f5905270050 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -182,11 +182,11 @@ static int __devinit drv_probe(struct pci_dev *pdev, } If you have multiple device nodes then it can be difficult to know when it is -safe to unregister v4l2_device. For this purpose v4l2_device has refcounting -support. The refcount is increased whenever video_register_device is called and -it is decreased whenever that device node is released. When the refcount reaches -zero, then the v4l2_device release() callback is called. You can do your final -cleanup there. +safe to unregister v4l2_device for hotpluggable devices. For this purpose +v4l2_device has refcounting support. The refcount is increased whenever +video_register_device is called and it is decreased whenever that device node +is released. When the refcount reaches zero, then the v4l2_device release() +callback is called. You can do your final cleanup there. If other device nodes (e.g. ALSA) are created, then you can increase and decrease the refcount manually as well by calling: @@ -197,6 +197,10 @@ or: int v4l2_device_put(struct v4l2_device *v4l2_dev); +Since the initial refcount is 1 you also need to call v4l2_device_put in the +disconnect() callback (for USB devices) or in the remove() callback (for e.g. +PCI devices), otherwise the refcount will never reach 0. + struct v4l2_subdev ------------------ @@ -262,11 +266,16 @@ struct v4l2_subdev_video_ops { ... }; +struct v4l2_subdev_pad_ops { + ... +}; + struct v4l2_subdev_ops { const struct v4l2_subdev_core_ops *core; const struct v4l2_subdev_tuner_ops *tuner; const struct v4l2_subdev_audio_ops *audio; const struct v4l2_subdev_video_ops *video; + const struct v4l2_subdev_pad_ops *video; }; The core ops are common to all subdevs, the other categories are implemented @@ -303,6 +312,22 @@ Don't forget to cleanup the media entity before the sub-device is destroyed: media_entity_cleanup(&sd->entity); +If the subdev driver intends to process video and integrate with the media +framework, it must implement format related functionality using +v4l2_subdev_pad_ops instead of v4l2_subdev_video_ops. + +In that case, the subdev driver may set the link_validate field to provide +its own link validation function. The link validation function is called for +every link in the pipeline where both of the ends of the links are V4L2 +sub-devices. The driver is still responsible for validating the correctness +of the format configuration between sub-devices and video nodes. + +If link_validate op is not set, the default function +v4l2_subdev_link_validate_default() is used instead. This function ensures +that width, height and the media bus pixel code are equal on both source and +sink of the link. Subdev drivers are also free to use this function to +perform the checks mentioned above in addition to their own checks. + A device (bridge) driver needs to register the v4l2_subdev with the v4l2_device: @@ -555,19 +580,25 @@ allocated memory. You should also set these fields: - v4l2_dev: set to the v4l2_device parent device. + - name: set to something descriptive and unique. + - fops: set to the v4l2_file_operations struct. + - ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance (highly recommended to use this and it might become compulsory in the future!), then set this to your v4l2_ioctl_ops struct. + - lock: leave to NULL if you want to do all the locking in the driver. - Otherwise you give it a pointer to a struct mutex_lock and before any - of the v4l2_file_operations is called this lock will be taken by the - core and released afterwards. + Otherwise you give it a pointer to a struct mutex_lock and before the + unlocked_ioctl file operation is called this lock will be taken by the + core and released afterwards. See the next section for more details. + - prio: keeps track of the priorities. Used to implement VIDIOC_G/S_PRIORITY. If left to NULL, then it will use the struct v4l2_prio_state in v4l2_device. If you want to have a separate priority state per (group of) device node(s), then you can point it to your own struct v4l2_prio_state. + - parent: you only set this if v4l2_device was registered with NULL as the parent device struct. This only happens in cases where one hardware device has multiple PCI devices that all share the same v4l2_device core. @@ -577,6 +608,7 @@ You should also set these fields: (cx8802). Since the v4l2_device cannot be associated with a particular PCI device it is setup without a parent device. But when the struct video_device is setup you do know which parent PCI device to use. + - flags: optional. Set to V4L2_FL_USE_FH_PRIO if you want to let the framework handle the VIDIOC_G/S_PRIORITY ioctls. This requires that you use struct v4l2_fh. Eventually this flag will disappear once all drivers use the core @@ -587,6 +619,16 @@ in your v4l2_file_operations struct. Do not use .ioctl! This is deprecated and will go away in the future. +In some cases you want to tell the core that a function you had specified in +your v4l2_ioctl_ops should be ignored. You can mark such ioctls by calling this +function before video_device_register is called: + +void v4l2_disable_ioctl(struct video_device *vdev, unsigned int cmd); + +This tends to be needed if based on external factors (e.g. which card is +being used) you want to turns off certain features in v4l2_ioctl_ops without +having to make a new struct. + The v4l2_file_operations struct is a subset of file_operations. The main difference is that the inode argument is omitted since it is never used. @@ -609,8 +651,22 @@ v4l2_file_operations and locking -------------------------------- You can set a pointer to a mutex_lock in struct video_device. Usually this -will be either a top-level mutex or a mutex per device node. If you want -finer-grained locking then you have to set it to NULL and do you own locking. +will be either a top-level mutex or a mutex per device node. By default this +lock will be used for unlocked_ioctl, but you can disable locking for +selected ioctls by calling: + + void v4l2_disable_ioctl_locking(struct video_device *vdev, unsigned int cmd); + +E.g.: v4l2_disable_ioctl_locking(vdev, VIDIOC_DQBUF); + +You have to call this before you register the video_device. + +Particularly with USB drivers where certain commands such as setting controls +can take a long time you may want to do your own locking for the buffer queuing +ioctls. + +If you want still finer-grained locking then you have to set mutex_lock to NULL +and do you own locking completely. It is up to the driver developer to decide which method to use. However, if your driver has high-latency operations (for example, changing the exposure @@ -618,7 +674,7 @@ of a USB webcam might take a long time), then you might be better off with doing your own locking if you want to allow the user to do other things with the device while waiting for the high-latency command to finish. -If a lock is specified then all file operations will be serialized on that +If a lock is specified then all ioctl commands will be serialized on that lock. If you use videobuf then you must pass the same lock to the videobuf queue initialize function: if videobuf has to wait for a frame to arrive, then it will temporarily unlock the lock and relock it afterwards. If your driver @@ -941,21 +997,35 @@ fast. Useful functions: -- v4l2_event_queue() +void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev) Queue events to video device. The driver's only responsibility is to fill in the type and the data fields. The other fields will be filled in by V4L2. -- v4l2_event_subscribe() +int v4l2_event_subscribe(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub, unsigned elems, + const struct v4l2_subscribed_event_ops *ops) The video_device->ioctl_ops->vidioc_subscribe_event must check the driver is able to produce events with specified event id. Then it calls - v4l2_event_subscribe() to subscribe the event. The last argument is the - size of the event queue for this event. If it is 0, then the framework - will fill in a default value (this depends on the event type). + v4l2_event_subscribe() to subscribe the event. + + The elems argument is the size of the event queue for this event. If it is 0, + then the framework will fill in a default value (this depends on the event + type). + + The ops argument allows the driver to specify a number of callbacks: + * add: called when a new listener gets added (subscribing to the same + event twice will only cause this callback to get called once) + * del: called when a listener stops listening + * replace: replace event 'old' with event 'new'. + * merge: merge event 'old' into event 'new'. + All 4 callbacks are optional, if you don't want to specify any callbacks + the ops argument itself maybe NULL. -- v4l2_event_unsubscribe() +int v4l2_event_unsubscribe(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) vidioc_unsubscribe_event in struct v4l2_ioctl_ops. A driver may use v4l2_event_unsubscribe() directly unless it wants to be involved in @@ -964,7 +1034,7 @@ Useful functions: The special type V4L2_EVENT_ALL may be used to unsubscribe all events. The drivers may want to handle this in a special way. -- v4l2_event_pending() +int v4l2_event_pending(struct v4l2_fh *fh) Returns the number of pending events. Useful when implementing poll. diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 6386f8c0482e..930126698a0f 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -2,6 +2,7 @@ The Definitive KVM (Kernel-based Virtual Machine) API Documentation =================================================================== 1. General description +---------------------- The kvm API is a set of ioctls that are issued to control various aspects of a virtual machine. The ioctls belong to three classes @@ -23,7 +24,9 @@ of a virtual machine. The ioctls belong to three classes Only run vcpu ioctls from the same thread that was used to create the vcpu. + 2. File descriptors +------------------- The kvm API is centered around file descriptors. An initial open("/dev/kvm") obtains a handle to the kvm subsystem; this handle @@ -41,7 +44,9 @@ not cause harm to the host, their actual behavior is not guaranteed by the API. The only supported use is one virtual machine per process, and one vcpu per thread. + 3. Extensions +------------- As of Linux 2.6.22, the KVM ABI has been stabilized: no backward incompatible change are allowed. However, there is an extension @@ -53,7 +58,9 @@ Instead, kvm defines extension identifiers and a facility to query whether a particular extension identifier is available. If it is, a set of ioctls is available for application use. + 4. API description +------------------ This section describes ioctls that can be used to control kvm guests. For each ioctl, the following information is provided along with a @@ -75,6 +82,7 @@ description: Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL) are not detailed, but errors with specific meanings are. + 4.1 KVM_GET_API_VERSION Capability: basic @@ -90,6 +98,7 @@ supported. Applications should refuse to run if KVM_GET_API_VERSION returns a value other than 12. If this check passes, all ioctls described as 'basic' will be available. + 4.2 KVM_CREATE_VM Capability: basic @@ -109,6 +118,7 @@ In order to create user controlled virtual machines on S390, check KVM_CAP_S390_UCONTROL and use the flag KVM_VM_S390_UCONTROL as privileged user (CAP_SYS_ADMIN). + 4.3 KVM_GET_MSR_INDEX_LIST Capability: basic @@ -135,6 +145,7 @@ Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are not returned in the MSR list, as different vcpus can have a different number of banks, as set via the KVM_X86_SETUP_MCE ioctl. + 4.4 KVM_CHECK_EXTENSION Capability: basic @@ -149,6 +160,7 @@ receives an integer that describes the extension availability. Generally 0 means no and 1 means yes, but some extensions may report additional information in the integer return value. + 4.5 KVM_GET_VCPU_MMAP_SIZE Capability: basic @@ -161,6 +173,7 @@ The KVM_RUN ioctl (cf.) communicates with userspace via a shared memory region. This ioctl returns the size of that region. See the KVM_RUN documentation for details. + 4.6 KVM_SET_MEMORY_REGION Capability: basic @@ -171,6 +184,7 @@ Returns: 0 on success, -1 on error This ioctl is obsolete and has been removed. + 4.7 KVM_CREATE_VCPU Capability: basic @@ -223,6 +237,7 @@ machines, the resulting vcpu fd can be memory mapped at page offset KVM_S390_SIE_PAGE_OFFSET in order to obtain a memory map of the virtual cpu's hardware control block. + 4.8 KVM_GET_DIRTY_LOG (vm ioctl) Capability: basic @@ -246,6 +261,7 @@ since the last call to this ioctl. Bit 0 is the first page in the memory slot. Ensure the entire structure is cleared to avoid padding issues. + 4.9 KVM_SET_MEMORY_ALIAS Capability: basic @@ -256,6 +272,7 @@ Returns: 0 (success), -1 (error) This ioctl is obsolete and has been removed. + 4.10 KVM_RUN Capability: basic @@ -272,6 +289,7 @@ obtained by mmap()ing the vcpu fd at offset 0, with the size given by KVM_GET_VCPU_MMAP_SIZE. The parameter block is formatted as a 'struct kvm_run' (see below). + 4.11 KVM_GET_REGS Capability: basic @@ -292,6 +310,7 @@ struct kvm_regs { __u64 rip, rflags; }; + 4.12 KVM_SET_REGS Capability: basic @@ -304,6 +323,7 @@ Writes the general purpose registers into the vcpu. See KVM_GET_REGS for the data structure. + 4.13 KVM_GET_SREGS Capability: basic @@ -331,6 +351,7 @@ interrupt_bitmap is a bitmap of pending external interrupts. At most one bit may be set. This interrupt has been acknowledged by the APIC but not yet injected into the cpu core. + 4.14 KVM_SET_SREGS Capability: basic @@ -342,6 +363,7 @@ Returns: 0 on success, -1 on error Writes special registers into the vcpu. See KVM_GET_SREGS for the data structures. + 4.15 KVM_TRANSLATE Capability: basic @@ -365,6 +387,7 @@ struct kvm_translation { __u8 pad[5]; }; + 4.16 KVM_INTERRUPT Capability: basic @@ -413,6 +436,7 @@ c) KVM_INTERRUPT_SET_LEVEL Note that any value for 'irq' other than the ones stated above is invalid and incurs unexpected behavior. + 4.17 KVM_DEBUG_GUEST Capability: basic @@ -423,6 +447,7 @@ Returns: -1 on error Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead. + 4.18 KVM_GET_MSRS Capability: basic @@ -451,6 +476,7 @@ Application code should set the 'nmsrs' member (which indicates the size of the entries array) and the 'index' member of each array entry. kvm will fill in the 'data' member. + 4.19 KVM_SET_MSRS Capability: basic @@ -466,6 +492,7 @@ Application code should set the 'nmsrs' member (which indicates the size of the entries array), and the 'index' and 'data' members of each array entry. + 4.20 KVM_SET_CPUID Capability: basic @@ -494,6 +521,7 @@ struct kvm_cpuid { struct kvm_cpuid_entry entries[0]; }; + 4.21 KVM_SET_SIGNAL_MASK Capability: basic @@ -516,6 +544,7 @@ struct kvm_signal_mask { __u8 sigset[0]; }; + 4.22 KVM_GET_FPU Capability: basic @@ -541,6 +570,7 @@ struct kvm_fpu { __u32 pad2; }; + 4.23 KVM_SET_FPU Capability: basic @@ -566,6 +596,7 @@ struct kvm_fpu { __u32 pad2; }; + 4.24 KVM_CREATE_IRQCHIP Capability: KVM_CAP_IRQCHIP @@ -579,6 +610,7 @@ ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a local APIC. IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23 only go to the IOAPIC. On ia64, a IOSAPIC is created. + 4.25 KVM_IRQ_LINE Capability: KVM_CAP_IRQCHIP @@ -600,6 +632,7 @@ struct kvm_irq_level { __u32 level; /* 0 or 1 */ }; + 4.26 KVM_GET_IRQCHIP Capability: KVM_CAP_IRQCHIP @@ -621,6 +654,7 @@ struct kvm_irqchip { } chip; }; + 4.27 KVM_SET_IRQCHIP Capability: KVM_CAP_IRQCHIP @@ -642,6 +676,7 @@ struct kvm_irqchip { } chip; }; + 4.28 KVM_XEN_HVM_CONFIG Capability: KVM_CAP_XEN_HVM @@ -666,6 +701,7 @@ struct kvm_xen_hvm_config { __u8 pad2[30]; }; + 4.29 KVM_GET_CLOCK Capability: KVM_CAP_ADJUST_CLOCK @@ -684,6 +720,7 @@ struct kvm_clock_data { __u32 pad[9]; }; + 4.30 KVM_SET_CLOCK Capability: KVM_CAP_ADJUST_CLOCK @@ -702,6 +739,7 @@ struct kvm_clock_data { __u32 pad[9]; }; + 4.31 KVM_GET_VCPU_EVENTS Capability: KVM_CAP_VCPU_EVENTS @@ -741,6 +779,7 @@ struct kvm_vcpu_events { KVM_VCPUEVENT_VALID_SHADOW may be set in the flags field to signal that interrupt.shadow contains a valid state. Otherwise, this field is undefined. + 4.32 KVM_SET_VCPU_EVENTS Capability: KVM_CAP_VCPU_EVENTS @@ -767,6 +806,7 @@ If KVM_CAP_INTR_SHADOW is available, KVM_VCPUEVENT_VALID_SHADOW can be set in the flags field to signal that interrupt.shadow contains a valid state and shall be written into the VCPU. + 4.33 KVM_GET_DEBUGREGS Capability: KVM_CAP_DEBUGREGS @@ -785,6 +825,7 @@ struct kvm_debugregs { __u64 reserved[9]; }; + 4.34 KVM_SET_DEBUGREGS Capability: KVM_CAP_DEBUGREGS @@ -798,6 +839,7 @@ Writes debug registers into the vcpu. See KVM_GET_DEBUGREGS for the data structure. The flags field is unused yet and must be cleared on entry. + 4.35 KVM_SET_USER_MEMORY_REGION Capability: KVM_CAP_USER_MEM @@ -844,6 +886,7 @@ It is recommended to use this API instead of the KVM_SET_MEMORY_REGION ioctl. The KVM_SET_MEMORY_REGION does not allow fine grained control over memory allocation and is deprecated. + 4.36 KVM_SET_TSS_ADDR Capability: KVM_CAP_SET_TSS_ADDR @@ -862,6 +905,7 @@ This ioctl is required on Intel-based hosts. This is needed on Intel hardware because of a quirk in the virtualization implementation (see the internals documentation when it pops into existence). + 4.37 KVM_ENABLE_CAP Capability: KVM_CAP_ENABLE_CAP @@ -897,6 +941,7 @@ function properly, this is the place to put them. __u8 pad[64]; }; + 4.38 KVM_GET_MP_STATE Capability: KVM_CAP_MP_STATE @@ -927,6 +972,7 @@ Possible values are: This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel irqchip, the multiprocessing state must be maintained by userspace. + 4.39 KVM_SET_MP_STATE Capability: KVM_CAP_MP_STATE @@ -941,6 +987,7 @@ arguments. This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel irqchip, the multiprocessing state must be maintained by userspace. + 4.40 KVM_SET_IDENTITY_MAP_ADDR Capability: KVM_CAP_SET_IDENTITY_MAP_ADDR @@ -959,6 +1006,7 @@ This ioctl is required on Intel-based hosts. This is needed on Intel hardware because of a quirk in the virtualization implementation (see the internals documentation when it pops into existence). + 4.41 KVM_SET_BOOT_CPU_ID Capability: KVM_CAP_SET_BOOT_CPU_ID @@ -971,6 +1019,7 @@ Define which vcpu is the Bootstrap Processor (BSP). Values are the same as the vcpu id in KVM_CREATE_VCPU. If this ioctl is not called, the default is vcpu 0. + 4.42 KVM_GET_XSAVE Capability: KVM_CAP_XSAVE @@ -985,6 +1034,7 @@ struct kvm_xsave { This ioctl would copy current vcpu's xsave struct to the userspace. + 4.43 KVM_SET_XSAVE Capability: KVM_CAP_XSAVE @@ -999,6 +1049,7 @@ struct kvm_xsave { This ioctl would copy userspace's xsave struct to the kernel. + 4.44 KVM_GET_XCRS Capability: KVM_CAP_XCRS @@ -1022,6 +1073,7 @@ struct kvm_xcrs { This ioctl would copy current vcpu's xcrs to the userspace. + 4.45 KVM_SET_XCRS Capability: KVM_CAP_XCRS @@ -1045,6 +1097,7 @@ struct kvm_xcrs { This ioctl would set vcpu's xcr to the value userspace specified. + 4.46 KVM_GET_SUPPORTED_CPUID Capability: KVM_CAP_EXT_CPUID @@ -1119,6 +1172,7 @@ support. Instead it is reported via if that returns true and you use KVM_CREATE_IRQCHIP, or if you emulate the feature in userspace, then you can enable the feature for KVM_SET_CPUID2. + 4.47 KVM_PPC_GET_PVINFO Capability: KVM_CAP_PPC_GET_PVINFO @@ -1142,6 +1196,7 @@ of 4 instructions that make up a hypercall. If any additional field gets added to this structure later on, a bit for that additional piece of information will be set in the flags bitmap. + 4.48 KVM_ASSIGN_PCI_DEVICE Capability: KVM_CAP_DEVICE_ASSIGNMENT @@ -1185,6 +1240,7 @@ Only PCI header type 0 devices with PCI BAR resources are supported by device assignment. The user requesting this ioctl must have read/write access to the PCI sysfs resource files associated with the device. + 4.49 KVM_DEASSIGN_PCI_DEVICE Capability: KVM_CAP_DEVICE_DEASSIGNMENT @@ -1198,6 +1254,7 @@ Ends PCI device assignment, releasing all associated resources. See KVM_CAP_DEVICE_ASSIGNMENT for the data structure. Only assigned_dev_id is used in kvm_assigned_pci_dev to identify the device. + 4.50 KVM_ASSIGN_DEV_IRQ Capability: KVM_CAP_ASSIGN_DEV_IRQ @@ -1231,6 +1288,7 @@ The following flags are defined: It is not valid to specify multiple types per host or guest IRQ. However, the IRQ type of host and guest can differ or can even be null. + 4.51 KVM_DEASSIGN_DEV_IRQ Capability: KVM_CAP_ASSIGN_DEV_IRQ @@ -1245,6 +1303,7 @@ See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified by assigned_dev_id, flags must correspond to the IRQ type specified on KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed. + 4.52 KVM_SET_GSI_ROUTING Capability: KVM_CAP_IRQ_ROUTING @@ -1293,6 +1352,7 @@ struct kvm_irq_routing_msi { __u32 pad; }; + 4.53 KVM_ASSIGN_SET_MSIX_NR Capability: KVM_CAP_DEVICE_MSIX @@ -1314,6 +1374,7 @@ struct kvm_assigned_msix_nr { #define KVM_MAX_MSIX_PER_DEV 256 + 4.54 KVM_ASSIGN_SET_MSIX_ENTRY Capability: KVM_CAP_DEVICE_MSIX @@ -1332,7 +1393,8 @@ struct kvm_assigned_msix_entry { __u16 padding[3]; }; -4.54 KVM_SET_TSC_KHZ + +4.55 KVM_SET_TSC_KHZ Capability: KVM_CAP_TSC_CONTROL Architectures: x86 @@ -1343,7 +1405,8 @@ Returns: 0 on success, -1 on error Specifies the tsc frequency for the virtual machine. The unit of the frequency is KHz. -4.55 KVM_GET_TSC_KHZ + +4.56 KVM_GET_TSC_KHZ Capability: KVM_CAP_GET_TSC_KHZ Architectures: x86 @@ -1355,7 +1418,8 @@ Returns the tsc frequency of the guest. The unit of the return value is KHz. If the host has unstable tsc this ioctl returns -EIO instead as an error. -4.56 KVM_GET_LAPIC + +4.57 KVM_GET_LAPIC Capability: KVM_CAP_IRQCHIP Architectures: x86 @@ -1371,7 +1435,8 @@ struct kvm_lapic_state { Reads the Local APIC registers and copies them into the input argument. The data format and layout are the same as documented in the architecture manual. -4.57 KVM_SET_LAPIC + +4.58 KVM_SET_LAPIC Capability: KVM_CAP_IRQCHIP Architectures: x86 @@ -1387,7 +1452,8 @@ struct kvm_lapic_state { Copies the input argument into the the Local APIC registers. The data format and layout are the same as documented in the architecture manual. -4.58 KVM_IOEVENTFD + +4.59 KVM_IOEVENTFD Capability: KVM_CAP_IOEVENTFD Architectures: all @@ -1417,7 +1483,8 @@ The following flags are defined: If datamatch flag is set, the event will be signaled only if the written value to the registered address is equal to datamatch in struct kvm_ioeventfd. -4.59 KVM_DIRTY_TLB + +4.60 KVM_DIRTY_TLB Capability: KVM_CAP_SW_TLB Architectures: ppc @@ -1449,7 +1516,8 @@ The "num_dirty" field is a performance hint for KVM to determine whether it should skip processing the bitmap and just invalidate everything. It must be set to the number of set bits in the bitmap. -4.60 KVM_ASSIGN_SET_INTX_MASK + +4.61 KVM_ASSIGN_SET_INTX_MASK Capability: KVM_CAP_PCI_2_3 Architectures: x86 @@ -1482,6 +1550,7 @@ See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified by assigned_dev_id. In the flags field, only KVM_DEV_ASSIGN_MASK_INTX is evaluated. + 4.62 KVM_CREATE_SPAPR_TCE Capability: KVM_CAP_SPAPR_TCE @@ -1517,6 +1586,7 @@ the entries written by kernel-handled H_PUT_TCE calls, and also lets userspace update the TCE table directly which is useful in some circumstances. + 4.63 KVM_ALLOCATE_RMA Capability: KVM_CAP_PPC_RMA @@ -1549,6 +1619,7 @@ is supported; 2 if the processor requires all virtual machines to have an RMA, or 1 if the processor can use an RMA but doesn't require it, because it supports the Virtual RMA (VRMA) facility. + 4.64 KVM_NMI Capability: KVM_CAP_USER_NMI @@ -1574,6 +1645,7 @@ following algorithm: Some guests configure the LINT1 NMI input to cause a panic, aiding in debugging. + 4.65 KVM_S390_UCAS_MAP Capability: KVM_CAP_S390_UCONTROL @@ -1593,6 +1665,7 @@ This ioctl maps the memory at "user_addr" with the length "length" to the vcpu's address space starting at "vcpu_addr". All parameters need to be alligned by 1 megabyte. + 4.66 KVM_S390_UCAS_UNMAP Capability: KVM_CAP_S390_UCONTROL @@ -1612,6 +1685,7 @@ This ioctl unmaps the memory in the vcpu's address space starting at "vcpu_addr" with the length "length". The field "user_addr" is ignored. All parameters need to be alligned by 1 megabyte. + 4.67 KVM_S390_VCPU_FAULT Capability: KVM_CAP_S390_UCONTROL @@ -1628,6 +1702,7 @@ table upfront. This is useful to handle validity intercepts for user controlled virtual machines to fault in the virtual cpu's lowcore pages prior to calling the KVM_RUN ioctl. + 4.68 KVM_SET_ONE_REG Capability: KVM_CAP_ONE_REG @@ -1653,6 +1728,7 @@ registers, find a list below: | | PPC | KVM_REG_PPC_HIOR | 64 + 4.69 KVM_GET_ONE_REG Capability: KVM_CAP_ONE_REG @@ -1669,7 +1745,193 @@ at the memory location pointed to by "addr". The list of registers accessible using this interface is identical to the list in 4.64. + +4.70 KVM_KVMCLOCK_CTRL + +Capability: KVM_CAP_KVMCLOCK_CTRL +Architectures: Any that implement pvclocks (currently x86 only) +Type: vcpu ioctl +Parameters: None +Returns: 0 on success, -1 on error + +This signals to the host kernel that the specified guest is being paused by +userspace. The host will set a flag in the pvclock structure that is checked +from the soft lockup watchdog. The flag is part of the pvclock structure that +is shared between guest and host, specifically the second bit of the flags +field of the pvclock_vcpu_time_info structure. It will be set exclusively by +the host and read/cleared exclusively by the guest. The guest operation of +checking and clearing the flag must an atomic operation so +load-link/store-conditional, or equivalent must be used. There are two cases +where the guest will clear the flag: when the soft lockup watchdog timer resets +itself or when a soft lockup is detected. This ioctl can be called any time +after pausing the vcpu, but before it is resumed. + + +4.71 KVM_SIGNAL_MSI + +Capability: KVM_CAP_SIGNAL_MSI +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_msi (in) +Returns: >0 on delivery, 0 if guest blocked the MSI, and -1 on error + +Directly inject a MSI message. Only valid with in-kernel irqchip that handles +MSI messages. + +struct kvm_msi { + __u32 address_lo; + __u32 address_hi; + __u32 data; + __u32 flags; + __u8 pad[16]; +}; + +No flags are defined so far. The corresponding field must be 0. + + +4.71 KVM_CREATE_PIT2 + +Capability: KVM_CAP_PIT2 +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_pit_config (in) +Returns: 0 on success, -1 on error + +Creates an in-kernel device model for the i8254 PIT. This call is only valid +after enabling in-kernel irqchip support via KVM_CREATE_IRQCHIP. The following +parameters have to be passed: + +struct kvm_pit_config { + __u32 flags; + __u32 pad[15]; +}; + +Valid flags are: + +#define KVM_PIT_SPEAKER_DUMMY 1 /* emulate speaker port stub */ + +PIT timer interrupts may use a per-VM kernel thread for injection. If it +exists, this thread will have a name of the following pattern: + +kvm-pit/<owner-process-pid> + +When running a guest with elevated priorities, the scheduling parameters of +this thread may have to be adjusted accordingly. + +This IOCTL replaces the obsolete KVM_CREATE_PIT. + + +4.72 KVM_GET_PIT2 + +Capability: KVM_CAP_PIT_STATE2 +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_pit_state2 (out) +Returns: 0 on success, -1 on error + +Retrieves the state of the in-kernel PIT model. Only valid after +KVM_CREATE_PIT2. The state is returned in the following structure: + +struct kvm_pit_state2 { + struct kvm_pit_channel_state channels[3]; + __u32 flags; + __u32 reserved[9]; +}; + +Valid flags are: + +/* disable PIT in HPET legacy mode */ +#define KVM_PIT_FLAGS_HPET_LEGACY 0x00000001 + +This IOCTL replaces the obsolete KVM_GET_PIT. + + +4.73 KVM_SET_PIT2 + +Capability: KVM_CAP_PIT_STATE2 +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_pit_state2 (in) +Returns: 0 on success, -1 on error + +Sets the state of the in-kernel PIT model. Only valid after KVM_CREATE_PIT2. +See KVM_GET_PIT2 for details on struct kvm_pit_state2. + +This IOCTL replaces the obsolete KVM_SET_PIT. + + +4.74 KVM_PPC_GET_SMMU_INFO + +Capability: KVM_CAP_PPC_GET_SMMU_INFO +Architectures: powerpc +Type: vm ioctl +Parameters: None +Returns: 0 on success, -1 on error + +This populates and returns a structure describing the features of +the "Server" class MMU emulation supported by KVM. +This can in turn be used by userspace to generate the appropariate +device-tree properties for the guest operating system. + +The structure contains some global informations, followed by an +array of supported segment page sizes: + + struct kvm_ppc_smmu_info { + __u64 flags; + __u32 slb_size; + __u32 pad; + struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ]; + }; + +The supported flags are: + + - KVM_PPC_PAGE_SIZES_REAL: + When that flag is set, guest page sizes must "fit" the backing + store page sizes. When not set, any page size in the list can + be used regardless of how they are backed by userspace. + + - KVM_PPC_1T_SEGMENTS + The emulated MMU supports 1T segments in addition to the + standard 256M ones. + +The "slb_size" field indicates how many SLB entries are supported + +The "sps" array contains 8 entries indicating the supported base +page sizes for a segment in increasing order. Each entry is defined +as follow: + + struct kvm_ppc_one_seg_page_size { + __u32 page_shift; /* Base page shift of segment (or 0) */ + __u32 slb_enc; /* SLB encoding for BookS */ + struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ]; + }; + +An entry with a "page_shift" of 0 is unused. Because the array is +organized in increasing order, a lookup can stop when encoutering +such an entry. + +The "slb_enc" field provides the encoding to use in the SLB for the +page size. The bits are in positions such as the value can directly +be OR'ed into the "vsid" argument of the slbmte instruction. + +The "enc" array is a list which for each of those segment base page +size provides the list of supported actual page sizes (which can be +only larger or equal to the base page size), along with the +corresponding encoding in the hash PTE. Similarily, the array is +8 entries sorted by increasing sizes and an entry with a "0" shift +is an empty entry and a terminator: + + struct kvm_ppc_one_page_size { + __u32 page_shift; /* Page shift (or 0) */ + __u32 pte_enc; /* Encoding in the HPTE (>>12) */ + }; + +The "pte_enc" field provides a value that can OR'ed into the hash +PTE's RPN field (ie, it needs to be shifted left by 12 to OR it +into the hash PTE second double word). + 5. The kvm_run structure +------------------------ Application code obtains a pointer to the kvm_run structure by mmap()ing a vcpu fd. From that point, application code can control @@ -1910,7 +2172,9 @@ and usually define the validity of a groups of registers. (e.g. one bit }; + 6. Capabilities that can be enabled +----------------------------------- There are certain capabilities that change the behavior of the virtual CPU when enabled. To enable them, please see section 4.37. Below you can find a list of @@ -1926,6 +2190,7 @@ The following information is provided along with the description: Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL) are not detailed, but errors with specific meanings are. + 6.1 KVM_CAP_PPC_OSI Architectures: ppc @@ -1939,6 +2204,7 @@ between the guest and the host. When this capability is enabled, KVM_EXIT_OSI can occur. + 6.2 KVM_CAP_PPC_PAPR Architectures: ppc @@ -1957,6 +2223,7 @@ HTAB invisible to the guest. When this capability is enabled, KVM_EXIT_PAPR_HCALL can occur. + 6.3 KVM_CAP_SW_TLB Architectures: ppc diff --git a/Documentation/virtual/kvm/cpuid.txt b/Documentation/virtual/kvm/cpuid.txt index 882068538c9c..83afe65d4966 100644 --- a/Documentation/virtual/kvm/cpuid.txt +++ b/Documentation/virtual/kvm/cpuid.txt @@ -10,11 +10,15 @@ a guest. KVM cpuid functions are: function: KVM_CPUID_SIGNATURE (0x40000000) -returns : eax = 0, +returns : eax = 0x40000001, ebx = 0x4b4d564b, ecx = 0x564b4d56, edx = 0x4d. Note that this value in ebx, ecx and edx corresponds to the string "KVMKVMKVM". +The value in eax corresponds to the maximum cpuid function present in this leaf, +and will be updated if more functions are added in the future. +Note also that old hosts set eax value to 0x0. This should +be interpreted as if the value was 0x40000001. This function queries the presence of KVM cpuid leafs. diff --git a/Documentation/virtual/kvm/msr.txt b/Documentation/virtual/kvm/msr.txt index 50317809113d..96b41bd97523 100644 --- a/Documentation/virtual/kvm/msr.txt +++ b/Documentation/virtual/kvm/msr.txt @@ -109,6 +109,10 @@ MSR_KVM_SYSTEM_TIME_NEW: 0x4b564d01 0 | 24 | multiple cpus are guaranteed to | | be monotonic ------------------------------------------------------------- + | | guest vcpu has been paused by + 1 | N/A | the host + | | See 4.70 in api.txt + ------------------------------------------------------------- Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid leaf prior to usage. diff --git a/Documentation/watchdog/src/watchdog-test.c b/Documentation/watchdog/src/watchdog-test.c index 63fdc34ceb98..73ff5cc93e05 100644 --- a/Documentation/watchdog/src/watchdog-test.c +++ b/Documentation/watchdog/src/watchdog-test.c @@ -7,6 +7,7 @@ #include <string.h> #include <unistd.h> #include <fcntl.h> +#include <signal.h> #include <sys/ioctl.h> #include <linux/types.h> #include <linux/watchdog.h> @@ -29,6 +30,14 @@ static void keep_alive(void) * The main program. Run the program with "-d" to disable the card, * or "-e" to enable the card. */ + +void term(int sig) +{ + close(fd); + fprintf(stderr, "Stopping watchdog ticks...\n"); + exit(0); +} + int main(int argc, char *argv[]) { int flags; @@ -47,26 +56,31 @@ int main(int argc, char *argv[]) ioctl(fd, WDIOC_SETOPTIONS, &flags); fprintf(stderr, "Watchdog card disabled.\n"); fflush(stderr); - exit(0); + goto end; } else if (!strncasecmp(argv[1], "-e", 2)) { flags = WDIOS_ENABLECARD; ioctl(fd, WDIOC_SETOPTIONS, &flags); fprintf(stderr, "Watchdog card enabled.\n"); fflush(stderr); - exit(0); + goto end; } else { fprintf(stderr, "-d to disable, -e to enable.\n"); fprintf(stderr, "run by itself to tick the card.\n"); fflush(stderr); - exit(0); + goto end; } } else { fprintf(stderr, "Watchdog Ticking Away!\n"); fflush(stderr); } + signal(SIGINT, term); + while(1) { keep_alive(); sleep(1); } +end: + close(fd); + return 0; } diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt index 227f6cd0e5fa..25fe4304f2fc 100644 --- a/Documentation/watchdog/watchdog-kernel-api.txt +++ b/Documentation/watchdog/watchdog-kernel-api.txt @@ -59,7 +59,7 @@ It contains following fields: * bootstatus: status of the device after booting (reported with watchdog WDIOF_* status bits). * driver_data: a pointer to the drivers private data of a watchdog device. - This data should only be accessed via the watchdog_set_drvadata and + This data should only be accessed via the watchdog_set_drvdata and watchdog_get_drvdata routines. * status: this field contains a number of status bits that give extra information about the status of the device (Like: is the watchdog timer |
