diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 97 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-at91.txt | 10 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt | 26 | ||||
| -rw-r--r-- | Documentation/i2c/smbus-protocol.rst | 2 |
4 files changed, 108 insertions, 27 deletions
diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml new file mode 100644 index 000000000000..edbca2476128 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/brcm,brcmstb-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom STB BSC IIC Master Controller + +maintainers: + - Kamal Dasu <kdasu.kdev@gmail.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - brcm,bcm2711-hdmi-i2c + - brcm,brcmstb-i2c + - brcm,brcmper-i2c + + reg: + minItems: 1 + maxItems: 2 + items: + - description: BSC register range + - description: Auto-I2C register range + + reg-names: + items: + - const: bsc + - const: auto-i2c + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + clock-frequency: + enum: + - 46875 + - 50000 + - 93750 + - 97500 + - 187500 + - 200000 + - 375000 + - 390000 + +required: + - compatible + - reg + - clock-frequency + +unevaluatedProperties: false + +if: + properties: + compatible: + contains: + enum: + - brcm,bcm2711-hdmi-i2c + +then: + properties: + reg: + minItems: 2 + + required: + - reg-names + +else: + properties: + reg: + maxItems: 1 + +examples: + - | + bsca: i2c@f0406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&irq0_intc>; + reg = <0xf0406200 0x58>; + interrupts = <0x18>; + interrupt-names = "upg_bsca"; + }; + + - | + ddc0: i2c@7ef04500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <390000>; + }; + +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt index d4bad86107b8..96c914e048f5 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -28,8 +28,13 @@ Optional properties: "atmel,sama5d4-i2c", "atmel,sama5d2-i2c", "microchip,sam9x60-i2c". +- scl-gpios: specify the gpio related to SCL pin +- sda-gpios: specify the gpio related to SDA pin +- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c + bus recovery, call it "gpio" state - Child nodes conforming to i2c bus binding + Examples : i2c0: i2c@fff84000 { @@ -64,6 +69,11 @@ i2c0: i2c@f8034600 { clocks = <&flx0>; atmel,fifo-size = <16>; i2c-sda-hold-time-ns = <336>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; wm8731: wm8731@1a { compatible = "wm8731"; diff --git a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt b/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt deleted file mode 100644 index 0380609b177a..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt +++ /dev/null @@ -1,26 +0,0 @@ -Broadcom stb bsc iic master controller - -Required properties: - -- compatible: should be "brcm,brcmstb-i2c" or "brcm,brcmper-i2c" -- clock-frequency: 32-bit decimal value of iic master clock freqency in Hz - valid values are 375000, 390000, 187500, 200000 - 93750, 97500, 46875 and 50000 -- reg: specifies the base physical address and size of the registers - -Optional properties : - -- interrupts: specifies the interrupt number, the irq line to be used -- interrupt-names: Interrupt name string - -Example: - -bsca: i2c@f0406200 { - clock-frequency = <390000>; - compatible = "brcm,brcmstb-i2c"; - interrupt-parent = <&irq0_intc>; - reg = <0xf0406200 0x58>; - interrupts = <0x18>; - interrupt-names = "upg_bsca"; -}; - diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst index c122ed239f7f..c2e29633071e 100644 --- a/Documentation/i2c/smbus-protocol.rst +++ b/Documentation/i2c/smbus-protocol.rst @@ -274,7 +274,7 @@ to know which slave triggered the interrupt. This is implemented the following way in the Linux kernel: * I2C bus drivers which support SMBus alert should call - i2c_setup_smbus_alert() to setup SMBus alert support. + i2c_new_smbus_alert_device() to install SMBus alert support. * I2C drivers for devices which can trigger SMBus alerts should implement the optional alert() callback. |